Vertical Blinds Product Manual - TOSO · Vertical Blinds Product Name Type Features Louver Width...
Transcript of Vertical Blinds Product Manual - TOSO · Vertical Blinds Product Name Type Features Louver Width...
Vert ica l Bl indsProduct Manual
Vert ica l Bl indsProduct Manual
1501
Contents
Product Line-up
DUAL Standard / Opt ion Type Line-up
DUAL—Operat ional Choices
DUAL—Advanrages
Laser Cut—DUAL SHAPE
Accent Ser ies
Laser Cut—DUAL SEEZ
Options [Str ipe Pattern / Color Combinat ion]
Opt ion—Mult i Pelmet
Speci�cat ion and Structure
Instal lat ion Method
How to Order Product
Order Form Product
How to Order Str ipe Pattern / Color Combinat ion
Order Form Str ipe Pattern / Color Combinat ion
Cert i�cat ion Mark List
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 03
. . . . . P. 05
. . . . . . . . . . . . . . . . . . . . P. 07
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 08
. . . . . . . . . . . . . . . . . . . . . . . . P. 09
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 10
. . . . . . . . . . . . . . . . . . . . . . . . . . P. 11
. . . . . . . . P. 13
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 15
. . . . . . . . . . . . . . . . . . . . . P. 19
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 21
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 25
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 26
. . . . . P. 27
. . . . . . . . P. 28
. . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 29
Vert ica l Bl indsProduct Manual
0201
Opening and closing of the Louver and the angle adjustment can be done only in the Operation Wand.
Product Line-up
Vertical Blinds
Product Name
Type
Features
Louver Width
Operation Method
Reference
*Sample image is cord & wand type. *Sample image is cord & wand type.
For Ordinary Windows
100 mm 80 mm*Corresponding Louver width differs by design type.
A t ype, adding lase r cut t ing to the Louvers. Widely available for ordinary windows and large sliding doors.
DUAL SEEZDUAL SHAPE
A type, adding special cutting to both end of the Louvers. Widely avai lable for ordinary windows and large sliding doors.
For Ordinary WindowsFor Ordinary WindowsFor Ordinary Windows
100 mm 80 mm*Corresponding Louver width differs by Louver.
100 mm
Standard type of Vertical Blinds. Widely available for ordinary windows and large sliding doors.
DUAL DUAL OVERLAP
Opening and closing of the Louver is done in the Cord, and angle adjustment is done by the Operation Wand. Depending on the headrail-to-floor height, opening and closing of the Louver can be done by the Operation Wand.
Opening and closing of the Louver is done in the Cord, and angle adjustment is done by the Operation Wand. Depending on the headrail-to-floor height, opening and closing of the Louver can be done by the Operation Wand.
Opening and closing of the Louver and the angle adjustment can be done only in the Operation Wand.
*Sample image is cord & wand type. *Sample image is cord & wand type.
page 19 page 19
○ ○ ○○
Avilable Louver Color
Allowable Size
Part Color
Part color: White Part color: White
White White
Standard Standard
*Allowable size differs by design type.
*Headrail-to-floor height of wand type (option) is up to 3,000 mm.
*( ) is the case of the jointed track.
*Allowable size differs by design type.
*Headrail-to-floor height of wand type (option) is up to 3,000 mm.
*( ) is the case of the jointed track.
*Allowable size differs by Louver.
*Headrail-to-floor height of wand type (option) is up to 3,000 mm.
*( ) is the case of the jointed track.
*Allowable size differs by Louver.
*Headrail-to-floor height of wand type (option) is up to 3,000 mm.
*( ) is the case of the jointed track.
Option Option
Part color: Brown Part color: Brown
Brown Brown
Standard Standard
Option OptionWand type Wand type
Cord & wand type Cord & wand type
DUAL with a Jointed TrackProduct Widh:2,010–5,000mm
*The Jointed track is not available. *The Jointed track is not available.
The wider type of the Louver's overlapping width. Widely ava i lab le for ordinar y windows and large sliding doors.
100 mm width 236 colors
80 mm width 224 colors100 mm width 236 colors
100 mm width 110 colors
80 mm width 110 colors
Product width 300–4,000 mm (5,000 mm)
Product Height 500–3,000 mm
Product width 300–4,000 mm (5,000 mm)
Product Height 500–3,000 mm
Product width 300–4,000 mm (5,000 mm)
Product Height 500–6,000 mm
Maximum Area 12 m2
Product width 300–4,000 mm (5,000 mm)
Product Height 500–6,000 mm
Maximum Area 12 m2
85 colors
*Only corresponded to TF-4001–4040, TF-4401–4440, TF-4361–4375, TF-4461–4475, TF-4041–4070
03 04
Operation Type Available Products: DUAL / DUAL SHAPE / DUAL SEEZ / DUAL OVERLAP
Opening and closing of the Louver is done by the Cord, and angle adjustment is done by the Operation Wand. Cord is useful for opening and closing of the wide width window.
*If the product height and headrail-to-�oor height are 3,010 mm or more, the position of the Operation Wand is �xed and can not be opened and closed of the Louver in the Operation Wand. It is used only the angle adjustment.
Opening and closing and angle adjustment of the Louver are done only by the Operation Wand. Because operation method is simple and clarity, and no Cord, the operation part has a simpler appearance.
No Additional Charge
Standard price + 3,500 Yen(tax excluded)
Standard price + 3,500 Yen(tax excluded)
Standard price + 3,500 Yen(tax excluded)
No Additional Charge
Part Color Available Products: DUAL / DUAL SHAPE / DUAL SEEZ / DUAL OVERLAP
Drawn Style
[Opt ion ]
Available Products: DUAL / DUAL SHAPE / DUAL SEEZ / DUAL OVERLAP
【One-way Draw】A Cord and an Operation Wand is attached on either left or right side, and the Louver is drawn on one side.
If you specify the additional wand for a both-side operation, it is allowable from left or right: • to do the angle adjustment at a time.• to gather the Louver to the opposite side.Available for both one-way draw and split draw. *Do not correspond to the one-way draw of the side-by-side windows.*Not allowable if the product height and headrail-to-�oor height are 3,010 mm or more.
【Split Draw】A Cord and an Operation Wand is attached on either left or right side, and the Louver is divided into two parts and drawn on left and right side.
If you specify the split draw / 2 on 1 headrail blind, it is possible:• to do angle adjustment of the Louver separately left and right. • to gather the Louver from the left and right side to the center. Available for split draw.
*In the case of split draw, the Louver moves to the left and right side in the Cord, and move to the center by Operation Wand.
*Not allowable if the product height and headrail-to-�oor height are 3,010 mm or more.
If you specify the additional wand for a both-side operation, it is possible to gather the Louver to the left and right side.
In the case you change to the wand type in operation type, an Operation Wand is attached to the left or right side, and the Louver is drawn to one side.
*Not allowable if the product height and headrail-to-�oor height are 3,010 mm or more.*The jointed track is not available.
*Not allowable if the product height and headrail-to-�oor height are 3,010 mm or more. *The jointed track is not available.
[Option][Standard]Cord & wand type Wand type
[Option][Standard]
White Brown
[Option][Standard]
Cord & wand type Additional wand for a both-side operation
Split draw / 2-on-1 headrail blind
[Option]Wand type Additional wand for a both-side operation
[Standard]
【One-side wand operation type】
(Ex.) One-way Draw
Bottom Weight Choice Available Products: DUAL / DUAL SHAPE / DUAL SEEZ / DUAL OVERLAP
Because it does not use the Bottom Cord, it has a simpler appearance.
To reduce the �apping of Louver by wind.
Bottom Cord Choice Available Products: DUAL / DUAL SHAPE / DUAL SEEZ / DUAL OVERLAP
Replacement Louvers Available Products: DUAL / DUAL SHAPE / DUAL SEEZ / DUAL OVERLAP
DUAL OVERLAP, is using wider over-lapping width of Louver to minimize l igh t gap. I t i s recommended fo r bedroom if you are anxious about eyes and light gap from outside.
DUAL OVERLAP Available Products: DUAL OVERLAP
Bottom Cord
Bottom Weight
Bottom Cord
Louvers
overlapping
width when
fully closed:
30 mm
Louvers
overlapping
width when
fully closed:
10 mm
It is a type that the Track has been divided into two pieces and you can connect them at construction sites.Easily to carry and construct, at a place where a long Track is impossible to carry by the elevator such as high-rise �oors of apartments and buildings.
DUAL with A Jointed Track Available Products: DUAL / DUAL SHAPE / DUAL SEEZ / DUAL OVERLAP
*Allowable cord & wand type, split draw only.
[Standard]
Without Bottom Cord
[Option]
With Bottom Cord
DUALDUALOVERLAP
Not a noticeable design from the frontJointed track part
The mechanical Leaves as it is, you can replace the Louver only.
Price
Available Louver All the Louvers
Standard price of each product off 30%
*When ordering Replacement Louvers, specify the product size including the mechanical.
Product Width (W): 2,010–5,000 mm
White Brown
Available to lengthen (maximum 3 cm) or shorten the Louver.
[Standard]
Buckled type
*Do not correspond to DUAL SHAPE.
No Additional Charge
No Additional Charge
Standard price multiplied by 1.2
[Option]
French seam type
DUAL Standard / Option Type Line-up
05 06
Cord & Wand Type
Wand Type
Allowable to choose the standard operating type from the following two types.*Not allowable if the headrail-to-�oor height is 3,010 mm or more.*The jointed track is not available.
*When the Louver is fully closed, the Louver on the operation side angles slightly.
*If operate opening and closing by the Cord, the Operation Wand also moves with Louvers.
*If operate opening and closing by the Cord, the Operation Wand also moves with Louvers.
Gap dimensions at both ends
[Opposite side of operation side]
[Operation side]
15 mm
Cord
Wand
0–2 mm
*When the Louver is fully closed, the Louver on the operation side angles slightly.
Gap dimensions at both ends
[Opposite side of operation side]
[Operation side]
15 mm
Wand
0–2 mm
Overlapping size when two one-way draws set side-by-side for center opening.
Approx. 10 mm
Available Products: DUAL / DUAL SHAPE / DUAL SEEZ / DUAL OVERLAP
Available Products: DUAL / DUAL SHAPE / DUAL SEEZ / DUAL OVERLAP
One Side Wand Type *Do not correspond to one-way draw of the side by side windows.
Split Draw
One-way Draw *One-way draw of the side by side windows is common.
Left side control Right side control
Drawn to both sides
Left side control Right side control
Left side controlControl positionLouver stack selection
Control positionLouver stack selection
Left side control, drawn to right
Right side control, drawn to right
Drawn to right
Left side control, draw to left
Right side control, drawn to left
Drawn to left
Right side control
In addition to opening and closing operation by Cord, you can also operate directly opening and closing by Operation Wand.*If the product height and headrail-to-�oor height are 3,010 mm or more, the position of the Operation Wand is �xed and can not be opened and closed of the Louver in the Operation Wand. It is used only the angle adjustment.
*Not available for an ‘overlapping side-by-side’ order when each product width is 2,010 mm or over.
*If operation side and Louver drawn side are the same side, allowable to specify the overlap Louver of the side-by-side windows.
Available for an ‘overlapping side-by-side’ order
Available for an ‘overlapping side-by-side’ order
《DUAL̶Operational Choices》DUAL is allowable of opening and closing the Louver by Operation Wand.
《Option of DUAL》
In addition to operate opening and closing by the Cord, it is possible to attach the Operation Wand on both sides and operate the opening and closing directly from left and right side.*Not allowable if the product height and headrail-to-�oor height are 3,010 mm or more.In the case of both sides wand type by wand addition, drawn the Louvers in the center is allowable.
Option
*When the Louver is fully closed, the Louver on the operation side angles slightly.
Gap dimensions at both ends
[Opposite side of operation side]
[Operation side]
15 mm15 mm
One-way draw Split draw
Split-draw, 2-on-1 headrail blind(Available for split draw)
Additional wand for a both-side operation(Allowable both one-way draw and split draw)
Option of Cord & Wand Type
●Allowable to be drawn the Louvers in the
center from left and right sides by the
Operation Wand.
●Angle adjustment of the Louver is done
each left and right half. It is impossible to
do adjustment of all at once.
●Allowable to be drawn the Louvers in the center
from left and right sides by the Operation Wand.
●Angle adjustment of the Louver is done all at
once. It is impossible to do adjustment of each
left and right half.
●Allowable to draw the Louver on left and right side.
Additional wand for a both-side operation
Option of Wand Type
*Allowable to draw from the operation side to the opposite side. (Half of the Louver on the operation side is allowable to draw up to the center.)
*Allowable to draw from the operation side to the opposite side.
(Ex.) One-way draw, left side control, drawn to left (Ex.) Split draw, left side control
Drawn side of one-way draw Drawn side of split draw
●Allowable to draw the Louver on left and right side.
Drawn to left
Drawn to right
Drawn side by Operation Wand
《DUAL—Advantages》
Standard price + 3,500 Yen(tax excluded)
07 08
style A style C style B style D
Choose a Louver type from four styles.
DUAL SHAPE, designed both sides of the Louver.
In a modern space, it gives a delicate and unique impression.
200
80130
240
80130
200
80130
240
80130
Corresponding Louver is the common pattern with roller blinds, so the coordination with vertical blinds and roller blinds is also possible.
Choose a Louver from 3 series 85 colors.
Available Louver Table of Each Design Type
Louver Series Louver Number style A style B style C style D
コルト TF-4001–4040, TF-4401–4440
○ ○ ○ ○コルトシークル TF-4361–4375, TF-4461–4475
アクア TF-4041–4070
DUAL SHAPE
Selecting step of DUAL SHAPE
A series that combines two colors of plain and pattern.
As accents, two patterned Louvers are entered on both sides,
it becomes a unique and colorful impression.
DUAL 100, DUAL OVERLAP 100 [Available Types]
The third and fourth of Louvers from each sides are patterned Louver, the rest Louvers are plain.
[Design Pattern]
Accent Series
Plain
3 421 34 2 1
PlainPlain
Pattern Pattern
Laser Cut
09 10
*TYPE 09 and 13 do not correspond the Louver of 80 mm width.*Allowable to be manufactured TYPE 09, 19, 20, 21 from the height 800 mm or more, the TYPE 13, 18 from the height 1,010 mm or more.
Available Louver corresponding to laser cut are 4 series, 110 colors.You can choose a combination with eight design type freely. In addition, two eighth of the series expands the same series in the roller blinds. You can produce effectively a room in coordination with the vertical blinds and roller blinds.
Available Louver Table of Each Design Type
Every other one All designed
Placed the laser cut applied Louver every other one.
*Not allowable for the TYPE 19 and 20.
Placed all the laser cut applied Louver.
*Not allowable for the TYPE 21.
Choose the designed Louver arrangement either“Every other one” or “All designed”. (EX.) Every other one
Choose a Louver and Louver width. (Ex.) Louver: TF-4001, Louver width: 100 mm
TYPE 03 TYPE 07 TYPE 09 TYPE 13 TYPE 18 TYPE 19 TYPE 20 TYPE 21
Louver Series Louver Number Louver Width Roller blind and a common design
Roller blind and a common design
コルトTF-4001–4040
TF-4401–4440
100 mm ○ ○ ○ ○ ○ ○ ○ ○
80 mm ○ ○ × × ○ ○ ○ ○Roller blind and a common pattern
コルトシークルTF-4361–4375
TF-4461–4475
100 mm ○ ○ ○ ○ ○ ○ ○ ○
80 mm ○ ○ × × ○ ○ ○ ○Roller blind and a common pattern
アクア
TF-4041–4070
100 mm ○ ○ ○ ○ ○ ○ ○ ○
80 mm ○ ○ × × ○ ○ ○ ○Roller blind and a common pattern
セレト セレトノイ
セレトTF-4071–4085
セレトノイTF-4086–4095
100 mm ○ ○ ○ ○ ○ ○ ○ ○
80 mm ○ ○ × × ○ ○ ○ ○Roller blind and a common pattern
DUAL SEEZ
DUAL SEEZ, light and shadow create a rich sight.
Arrival of new designs in the DUAL SEEZ that applies laser cut to the plain Louver.
They produce the space with light and shadow.
Sunlight spilling from the laser cut holes will portray an expressive view to living with transience of time.
Please feel seasonal winds with looking the view of swaying sunlight.
Laser cut of DUAL SEEZ is expanded expressive eight designs. Each design type reflects many different impressive scenes to the window. In addition, TYPE 07 and 18 are available the same type design as the roller blinds MYTEC SEEZ. You can enjoy a combination to suit your space.
Specify the product name DUAL SEEZ.
Please choose from eight designs. (Ex.) TYPE 03
Design
Recommended point
Design
Recommended point
Design
Recommended point
Design
Recommended point
Light Accent Light Accent Light Accent Light Accent
○ ○ ○ ○
○ ○ ○ ○
TYPE 07
TYPE 03 TYPE 09Position of design is allowable on either
upper or lower
TYPE 13Position of design is allowable on either
upper or lower
Upper pattern
Upper pattern
Lower pattern
Lower pattern
TYPE 18Position of design is allowable
on either upper or lower
MYTEC SEEZ TYPE 01and a common design
MYTEC SEEZ TYPE 10and a common design
Position of design is allowable on either upper or lower
TYPE 19 TYPE 21
TYPE 20
Position of design is allowable on either upper or lower
Position of design is allowable on either
upper or lower
Selecting step of DUAL SEEZ
Design Type
Whole pattern
Partial pattern
Design that produces movement and flow to vertical line
High-decorative design for the window accent
Design Type
Laser Cut
11 12
Enjoy a space creation full of playfulness, using color coordination in a free idea.
Decorate the window rhythmically in a combination of two colors of Louver stripe pattern and freely combine the Louver color combination.
To match the interior taste, it is possible to produce styles freely depending on the color scheme from casual to chic impression.
Different from a simple window treatment of only one color, stripe accent sets off individual mood of the window.
Options [Stripe Pattern / Color Combination]
(Ex.) DUAL 100, stripe pattern 2:2 TF-4041 / 4062
Stripe Pattern
DUAL 100 / DUAL 80 / DUAL OVERLAP 100
[Available Types]
All Louvers except for the following: TF-4501–4510, TF-4112–4117, TF-4177–4180
[Available Louvers]
DUAL 100 / DUAL 80 / DUAL OVERLAP 100
[Available Types]
All Louvers except for the following: TF-4501–4510, TF-4112–4117, TF-4177–4180
[Available Louvers]
(Ex.) DUAL 100, color combination
TF-4002 / 4025 / 4026 / 4031 / 4032
A combination in the same series
A combination in the same series Color Combination
Standard color is white. Specify the optional color brown if you want to change.
・ You should choose Louvers of two colors from the same series. (Not allowable a combination of different series)・ All Louver width is the same. (Not allowable a combination of different Louver width)
[Standard Part Color]
[Condition]
Standard price of each product × 1.1 (tax excluded) *Standard price multiplied by 1.1.
[Prices]
・Bottom Weight is the standard specification of each series.
[Bottom Weight Choice]
Standard color is white. Specify the optional color brown if you want to change.
[Standard Part Color]
・ You should choose Louvers from the same series. (Not allowable a combination of different series)・ All Louver width is the same. (Not allowable a combination of different Louver width)・There is no limit on the number of color.
[Condition]
・Bottom Weight is the standard specification of each series.
[Bottom Weight Choice]
Standard price of each product × 1.1 (tax excluded) *Standard price multiplied by 1.1.
[Prices]
■Stripe PatternThis is the type that combines two colors of Louvers in the same series. Choose a combination pattern from three patterns below.
■Color Combination
Combination Example
This is the type of combining two or more color Louvers in the same series. You are free to combine the pattern.
pattern 1:1 pattern 2 :1 pattern 2 :2
*Among two colors of Louvers, specify which color is "Color a".
*All products start from the left side and "Color a".
*Among two colors of Louvers, specify which color is "Color a". *In both case the number of Louvers are odd or even, start from the left side and repeat every three Louvers. *Al l products start from the left s ide and "Color a".
*Among two colors of Louvers, specify which color is "Color a". (Only in the case of the total number is a multiple of 4, the number of each two colors are equal.)*In both case the number of Louvers are odd or even, start from the left side and repeat every three Louvers. *All products start from the left side and "Color a".
How to Order
① Specify your pattern. (Ex.) 1:1
② Specify the Louver product number of the base point (a). (Ex.) 1a=TF-4001
③ Specify the Louver product number
(b) combining with the base point (a). (Ex.) b=TF-4002
*More information for ordering method, refer to page 27.
Color a
Color b
1 repeat1 repeat
Color a
Color b
1 repeat
Color a
Color b
Color a Color a Color a
① Specify the total number of Louvers. (Ex.) 15 sheets *As for the total number of Louvers, refer to the number of Louvers table in Japanese Catalog page 200–. Please note that the total number of Louvers will vary depending on the product type and size.
② Specify the Louver product number and quantity, of the base point (a) Louver and combining Louver. (Ex.) TF-4001(a)×3 sheets TF-4002×3 sheets TF-4003×3 sheets TF-4004×3 sheets TF-4005×3 sheets
Color a
*More information for ordering method, refer to page 27.
●Gradation Patternizing of a similar color gradation
●Accent Adding accent color in a part
●Free pattern Arranging plural colors at random
How to Order
2:22:11:1
[Color-a×1 Louver] + [Color-b×1 Louver] [Color-a×2 Louvers] + [Color-b×1 Louver] [Color-a×2 Louvers] + [Color-b×2 Louvers]
1 repeat 1 repeat 1 repeat
Color-a
Color-b
Color-a
Color-b
Color-a
Color-b
[Color-a×1 Louver] + [Color-b×1 Louver]
1 repeat
Color-a
Color-b
[Color-a×2 Louvers] + [Color-b×1 Louver]
1 repeat
Color-a
Color-b
[Color-a×2 Louvers] + [Color-b×2 Louvers]
1 repeat
Color-a
Color-b
Caution
The number of Louvers is even
The number of Louvers is odd
13 14
The Multi Pelmet, a decorating tool at the window, has five points to create a room comfortably.Five points to attache the Multi Pelmet!
After
Before
Available in two types: Wood Pelmet set and Fabric Pelmet set.
From the abundant line-ups, Wood Pelmet set of 13 colors, and Fabric Pelmet set" of 141 colors, you can coordinate to match the image of the room.
Pelmet is available from two types and color line-up is large selection!
When you add a Pelmet to the current window product in-use, it
becomes the accent of top part, and will change the impression
of the window.
Large-scale construction work such as whole replacement of
product is not required and can be easily makeover.
A makeover of the window easy!
You can mount the Pelmet later to the current window product in-use. The
mounting method is just to plug in the mounting frame of Pelmet body (front
plate) to the resin projections of Pelmet installation aid. Because it is one-
touch type, mounting is easy.
In addition, by sliding the Holder Lock to resin projections for fall preven-
tion of the Pelmet, it has become a design of considering safety.
Available current to the installing, mounting is easy!
Use the I-type (for inside
mount), when installing a
window product by Ceiling
Installation. A coordination
in similar colors with the
window frame and pelmet,
it wil l result in a clean
impression.
For inside mount the I-type, attachable to the inside of the window frame!
Installation Frame
Holder LockResin projections of installation aid
When overlooking the product from high places, the product top becomes
a full view, it does not have a good appearance. If you choose a Cover Top
type, the product top is hidden and becomes clear impression. If the dast
lays on the Cover Top, you only wipe away it. Care is very easy.
AfterBefore
Cover Top type is available only the Wood Pelmet set.Not correspond to the Fabric Pelmet set.
A design considering eyes from the high place!
Cover Top
DUAL 100 / TF-4227
Option: Wood Pelmet Set C-type C / TM-116W (Bitter Brown)
Part Color: Brown (Option)
Using natural wood “Basswood”, a modern Pelmet with high-grade feeling.
Wood Pelmet Set
Veritical Blinds DUAL 100, 80 / DUAL SHAPE / DUAL SEEZ / DUAL OVELAP 100
Pelmet Types
Available Products
Color Variation / Wood Pelmet Set
Color Variation / Fabric Pelmet Set
Body
C Type
■Outside mount covering the window frame
Body
Type
■Ceiling mount inside the window frame
■One side of a blind attached to the wall
■ Wood Pelmet Set corresponds to the Cover Top to enhance the energy saving effect
(Not available for Fabric Pelmet set)
Body
L Type (for right)
The left side of the wndow is the wall
Body
L Type (for left)
The right side of the window is the wall*There are two types of "for inside" and "for outside".
・Cover Tops are installed by simply securing Fixing Clips to Brackets. ・Covers come in either dark
brown or light brown. Light BrownDark Brown
90 mm
13 colors(Ex.) TM-107W
*For using Cover Top
13 Colors
94 Colors
Pelmet Code Color Cover Top Color *
TM-102W Off White Light Brown
TM-104W Natural Light Brown
TM-106W Soft Brown Light Brown
TM-107W Soft Cherry Light Brown
TM-110W Cherry Dark Brown
Pelmet Code Product Number of Color
TR-2001–2040 コルト 40
TR-2124–2138 コルトシークル 15
TR-2053–2066 アクア 14
Pelmet Code Product Number of Color
TR-2067–2081 セレト 15
TR-2151–2156 オーブ 6
TR-2281–2284 ポルティエアップ 4
Pelmet Code Color Cover Top Color *
TM-111W Dark Brown Light Brown
TM-112W Deep Brown Dark Brown
TM-116W Bitter Brown Dark Brown
TM-117W Charcoal Brown Dark Brown
TM-120W Scandinavian Light Brown
Pelmet Code Color Cover Top Color *
TM-123W Grayish Brown Light Brown
TM-125W Antique Brown Dark Brown
TM-126W Antique White Light Brown
100 mm
(Ex.) TR-1034
It is a pelmet that uses the fabric of roller blinds, and represents the softness and colorfulness of the fabric.
Fabric Pelmet Set
94 colors
Option̶Multi Pelmet
*If you want to confirm actual colors, refer to a Japanese catalog (design blinds).
*If you want to confirm actual colors, refer to a Japanese catalog (roller blinds).
15 16
It is the optional only for the wall installation of Wood Pelmet.
Components Material
①Cover Top plastic molded
②Cover Top Under Plate plastic molded
③Cover Top Fixing Clip plastic molded
Cover Top Sky Side View
*The products that the projecting dimensions for setting installation aid is of 105 mm (products using the S size of installation aid), the Cover Top Under Plate is not bundled.
105 138–168
66 7090 94① ① ②
③
(Projecting dimensions for setting installation)
Cover Top
*Illustration shows C type.
Pelmet width = [Product width (W) +30]
5 5
⑤
①
④
②
③Components Materials
①PelmetWood Pelmet basswood
Fabric Pelmet polyester
②Frame with Pelmet aluminum extrusion
③Installation Aid for Pelmet steel press forming
④Resin projections of pelmet installation aid plastic molded
⑤ Projecting Adjust Screw steel
Additional Charge No
15Wall Wall
15Product width (W)
Body
Pelmet width = [Product width (W) + 30]
Product width (W)
Pelmet width = [Product width (W)]
Wall Wall
5 5Product width (W)
Pelmet width = [Product width (W) + 10]
Body Body
155 Product width (W)
Pelmet width = [Product width (W) + 20]
Body
15 5Product width (W)
Pelmet width = [Product width (W) + 20]
Body
C Type *Standard Type
L Type (for left) L Type (for right)
*Inside attach- ment of wallI Type *Outside attach-
ment of wallI Type
■ Standard Type Pelmet dimensions are determined based on the product size.
L3
L2
L1
Product width (W) Product width (W)
Body
L2
Body
L2
L1 Body
L2
Body
C Type
Product width (W)L Type (for right)
Product width (W)L Type (for left)
L3
L2
L1 Body
Product width (W)
40 ≦ L1 ≦ 190
350 ≦ L2 ≦ 4,030
40 ≦ L3 ≦ 190
78 ≦ L1 ≦ 190
350 ≦ L2 ≦ 4,030
78 ≦ L3 ≦ 190
Wood Pelmet
*As for the maximum projecting dimensions, refer to page 19.
Fabric Pelmet
I Type
Specify the dimensions of L1, L2, L3 in millimeters.■ Customized Type
Additional Charge 2,000 Yen (tax excluded)
Type of Installation Aid
Wall installation Ceiling installation
Product Group Product Name S L S L
Vertical BlindsDUAL 100, 80 / DUAL SHAPE / DUAL SEEZ /DUAL OVERLAP 100
× ○ ○ ×
○: available ×: no available
Wood Pelmet set with Cover Top
–700 710–1,700 1,710–2,500 2,510–
2 3 4 5
Wood Pelmet set
Product Width (mm) –1,200 1,210–2,000 2,010–2,400 2,410–
Installation Aid 2 3 4 5
Fabric Pelmet set
–1,200 1,210–2,000 2,010–3,000 3,010–
2 3 4 5
Specification・Structure
Components and Materials
Option Parts
Numbers of Bundled Installation Aid
Available Installation Aid List
If not specified, we apply the C Type.
Specify your product, attachment with Multi Pelmet.
(Ex.) DUAL 100
Drawing of the Pelmet
15 Product width (W)
Pelmet width = Product width (W)+30
Product body
15
42
1811119
36
5
8
118-168
90
3
9461
8 1751
L size for wall installation
29
1811119
36
5
8
88-116
90 9461
8 17 51S size for wall installation
Installation AidInstallation Aid
36
8
122-172
90 91
68 1647 29
78
23 11813
47L size for ceiling installation
36
8
92-116
90 91
8 17 547 28
43
8
47S size for ceiling installation
Wood Pelmet
Pelmet width = Product width (W)+30
Product body
15Product width (W)15
42
5
7
86-114
100 10661
8 17
29
1811119
51S size for wall installation
42
1811119
5142
5
7
115-1653
100 10661
8 17L size for wall installation
4728
43
8
47
42
7
90-113
102100
8 17 5S size for ceiling installation
47 29
78
23 11813
47
42
7
120-170
103100
68 16L size for ceiling installation
Fabric Pelmet
Wall installation Ceiling installation( ) are dimensions for the DUAL 80. ( ) are dimensions for the DUAL 80.
Vertical Blind
(Ex.) Wall installation
Specify installation method (wall or ceiling installation).
Specify the size.
(Ex.) Width: 800 mm
5
6
(Ex.) 1 set
Specify the quantity7
*Specify to round down the nearest 10 mm(Ex.) TM-102W
Specify your Multi Pelmet number.3
How to Order
(Ex.) Multi Pelmet / Wood Pelmet Cover Top Type
Choose your product of Multi Pelmet. 1
・Multi Pelmet / Wood Pelmet Set ・Multi Pelmet / Wood Pelmet Set Cover Top Type・Multi Pelmet / Fabric Pelmet Set
*We choose C Type (Sstandard type), if not specified.
(Ex.) L Type (For left)
Specify your Multi Pelmet type.4
・C Type (Standard type)
・ⅠType (Inside attachment)・ⅠType (Outside attachment) ・L Type (For left)
・L Type (For right)
[Standard Type]Specify by the product width of the product to install. By the product type, �nishing size of Pelmet is larger than product width.
C Type (Standard Tape)
Pelmet width is larger 30 mm than your specified size (product body to attach = product width).
Order size =Product width (W)
Pelmet width
Product body to attach
Specify L1, L2 and L3 size in 1 millimeters.
[Customized Type] Additional Charge 2,000 Yen (tax excluded)
Product width (W)
L2
BodyL1 L3
2
Wood Pelmet
40 ≦ L1 ≦ 190
350 ≦ L2 ≦ 4,030
40 ≦ L3 ≦ 190
Fabric Pelmet
78 ≦ L1 ≦ 190
350 ≦ L2 ≦ 4,030
78 ≦ L3 ≦ 190
*The projecting dimension of installation aid will be slightly different caused by the thickness of the fabrics.
☆ If the cover top type: 138
46(36)
148(138)☆ 33
32
12
64
☆カバートップ仕様の場合:138 128(113)
48
45(35)9(14)
42(37)
(Unit: mm) (Unit: mm)
(Unit: mm)
(Unit: mm)
(Unit: mm)
17 18
■Bottom Weight Choice
Buckled type French seam type Without Bottom Cord (Option)
Standard Option
■ Operation Choice page 07
■Operation Wand and Operation Cord Length
*If the headrail-to-�oor height or product height is 4,010 mm or more, Operation Wand is joint type (one location).
Caution If you do not specify the headrail-to-�oor height (h), the length of Operation Wand and Cord is determined by product height (H).
7 mm
Operation Method
■Angle adjustment of the Louver (rotation)
Adjust the Operation Wand with rotating. *If the angle of the Louver is irregular, they will return to the normal position, once you have all the Louver to the fully closed state and rotate the Operation Wand again.
■Opening and closing of the Louver (Cord operation)
■Opening and closing of the Louver (Wand operation)
①Rotate the Operation Wand, and adjust Louvers at right angles with the Track.
②Slide the Operation Wand, and release the hand at the position where you want to stop.*Slide the Operation Wand slowly. If you slide the Operation Wand with a strong force, Louvers move vigorously, uneveness occurs in Louvers,
Louvers will not be closed tidy.
*Do not operate the wand in a state of which Louvers are folded up.
Operation Wand
Cord
Cord
Track
Track
Track
Cord
Operation Wand
Operation Wand
②①
①
②
①Rotate the Operation Wand, and adjust Louvers at right angles with the Track.
②Pull the Cord downward, and release the hand at the position where you want to stop.*Pull the Cord slowly. If you pull the Cord with a strong force, Louvers move vigorously, uneveness occurs in Louvers, Louvers will not be closed tidy. In addition,
when the Operation Wand is sliding, it swings and sometimes hurts the window glass and wall, so pay attention to your operation.
■Angle adjustment of the Louver (rotation)
■Opening and closing of the Louver (Wand operation)
①Rotate the Operation Wand, and adjust Louvers at right angles with the Track.
②Slide the Operation Wand, and release the hand at the position where you want to stop. *Slide the Operation Wand slowly. If you slide the Operation Wand with a strong force, Louvers move vigorously, uneveness occurs in Louvers,
Louvers will not be closed tidy.
*Do not operate the wand in a state of which Louvers are folded up.
Track
Track
Operation Wand
Operation Wand
①
②
Adjust the Operation Wand with rotating. *If the angle of the Louver is irregular, they will return to the normal position, once you have all the Louver to the fully closed state and rotate the Operation Wand again.
60
Slat width 80 mm: 94Slat width 100 mm: 114
Slat width 80 mm: 94Slat width 100 mm: 114
60
*With Bottom Cord is the standard type.
*If choosing without Bottom Cord (Option), specify at the time of product ordering.
《Cord & wand type》
Operation Cord Length Operation Wand Length
《Wand type》
*Image is cord & wand type.
*If the headrail-to-�oor height is 3,010 mm or more, it is impossible to open and close the Louver by wand operation.
*If the headrail-to-�oor height is 3,010 mm or more, it is impossible to open and close the Louver by Wand operation.
3,810–4,000 mm
4,010–4,200 mm
4,210–4,600 mm
4,610–4,900 mm
4,910–5,200 mm
5,210–5,500 mm
5,510–5,800 mm
5,810–6,000 mm
2,600 mm
2,900 mm
3,200 mm
3,500 mm
3,800 mm
4,100 mm
4,400 mm
4,700 mm
Product Height (H) orHeadrail-to-�oor Height(h)
Operation Wand Length
Op
erat
ion
Wan
d
leng
th
500–1,600 mm
1,610–2,000 mm
2,010–2,300 mm
2,310–2,600 mm
2,610–2,900 mm
2,910–3,200 mm
3,210–3,500 mm
3,510–3,800 mm
300 mm
600 mm
900 mm
1,200 mm
1,500 mm
1,800 mm
2,100 mm
2,400 mm
Product Height (H) orHeadrail-to-�oor Height(h)
Operation Wand Length
500–1,000 mm
1,010–1,600 mm
1,610–2,000 mm
2,010–6,000 mm
Product Height (H) orHeadrail-to-�oor height (h)
(H)-200 mm or(h )-200 mm
(H)-400 mm or(h )-400 mm
(H)-600 mm or (h )-600 mm
Product Height (H) orHeadrail-to-�oor Height (h)
Operation Cord Length
Op
erat
ion
Cor
d le
ngth
Headrail-to-�oor height: from top of Bracket to �oor
Product height: from top of Bracket to bottom of Louver
(not including the thickness of the L-shape Wall Fixing Aid).
Operation Wand length: from top of Track to bottom of wand
Operation Cord length: from top of Track to bottom of
Tension Weight
■Part Color
White Brown
Standard color is . is also available.
Specify the optional color brown at the time of crdering.
W h i t e
B ro w n
Because it causes the trouble, be sure to open and close Louvers in a state that Louvers are at right angle with the Track.Caution
Pro
duc
t H
eigh
t (H
)
Hea
dra
il-to
-�oo
r he
ight
(h)
(unit: mm)
Cord
Ring
Safety Tassel
47
3214
12
14
12
44
70(84)
47
30
4
(Louver width)/2
47 32
73
70(84)
26
730
4
(Louver width)/2
Louver widthLouver width
■Side View
■Option
Safety TasselCord for opening and closing operations is attached in the product, but there is a risk that Cord becomes the cause of unexpected accidents. In order to avoid accidents, we equipped a Safety Tassel. Please bundle the Cord with a Safety Tassel at a position where child's hand does not reach.
Material: plastic moldedColor: White
Bracket Spacer 12
Bracket Spacer 22
190 Yen for one piece (tax excluded) with 2 pan head 3.5×40 screws380 Yen for two pieces (tax excluded) with 4 pan head 3.5×40 screws570 Yen for three pieces (tax excluded) with 6 pan head 3.5×40 screws
200 Yen for one piece (tax excluded) with 2 pan head 3.5×50 screws400 Yen for two pieces (tax excluded) with 4 pan head 3.5×50 screws600 Yen for three pieces (tax excluded) with 6 pan head 3.5×50 screws
■Allowable Size
*Allowable size and height limitation differ from Louver to Louver. *For ordering, round down the nearest 10 mm -both in width and in height
Product width 2,000 ×Product height 2,000 mm 3.9 kg(In the case of select series)
■Product Weight Guide
Bracket Spacer 12, 22Use this when you need to clear the window frame for an outside mount.
Specifications and Structure
■Front View ■Attached Parts
Easy Snap Ceiling Bracket
L-shape Wall Fixing AidSame as the rail color
*Louvers overlapping width when fully closed: Dual SEEZ, DUAL: 10 mm DUAL OVERLAP: 30 mm
The Number of Attached Parts
Product Width (W)
Product Height (H)
300–4,000 mm
500–6,000 mm
Wall installation (using L-shape Wall Fixing Aid)*Projection length of the wall attachment installation aid L is adjustable in two stages.
*
Cord & wand type only
Cord & wand type only
① ②③ ④ ⑤ ⑦ ⑧ ⑨ ⑩
⑪
⑥
⑫
⑬
⑭
⑮
⑯
⑰
⑱
Product width (W) *When ordering, specify the installation method (wall installation / ceiling installation). Speci�ed Bracket will be bundled.
Silver White (Standard)
Easy Snap Ceiling Bracket
7 1211
25
4
25 9 18
52
*Bundle the Cord.Safety Tassel
*Wall installationUse to �x the Easy Snap Ceiling Bracket to L-shape Wall Fixing Aid.
L-shape Wall Fixing Aid
12
14
2739
92
6015 92
143212
60152739
32
*In the case of direct ceiling installation, product height will be shorter 7 mm of the Bracket thickness.
For Ordinary Window
Standard type of vertical blinds. Widely available for ordinary windows and large sliding doors.
Brown
*Product Height: from top of the Bracket to bottom of the Louver (not including the thickness of L-shape Wall Fixing Aid).
(*1) Lay one spacer on the other before �tting.
10
45
25
20
2212 45
25Bracket Spacer 12
BracketSpacer 22 (*1)
Bracket
Bracket screw
Bracket Spacer
Window frame
*As for the speci�cations and structure of the jointed track, refer to page 23.
DUAL / DUAL SHAPE / DUAL SEEZ / DUAL OVERLAP
Product height (H)
plastic molded
plastic molded
plastic molded
plastic molded
aluminum extrusion
plastic molded
aluminum extrusion
plastic molded
plastic molded
① Idle End Cap
② Shaft Support
③ Top Carrier
④ Carrier
⑤ Tilte Shaft
⑥ Spacer Link
⑦ Track
⑧ End Stop
⑨ Wand Control
Box
⑩ Control End Cap
⑪ Cord (1.8 φ)
⑫ Operation Wand
⑬ Tension Weight
⑭ Hanger
⑮ Louver Hanger
⑯ Louver
⑰ Bottom Weight Cover
⑱ Bottom Weight
plastic molded
synthetic �ber
aluminum extrusion, plastic molded
plastic molded, steel press forming
plastic molded
plastic molded
Materials differ depending on type.
plastic molded
steel press forming
Product height (H)
Product height (H)
41
47
27
7
30
4
(Louver width)/2
Louver width
Ceiling installation(Using Easy Snap Ceiling Bracket)
Product height (H)*
47
Louver width80 mm: 100 mm or more100 mm: 120 mm or more
41
7
30
4
Louver width
If installing inside of the curtain box.
Product height (H)*
60 mm or more
Product Width (W)
300–1,200 mm
1,210–2,400 mm
2,410–4,000 mm
Bracket
2
3
4
Louvers overlapping width when fully closed
(Unit: mm)
(Unit: mm)
(Unit: mm)
(Unit: mm) (Unit: mm) (Unit: mm) (Unit: mm)
19 20
Installation Method
2. Fit the Bracket with accompanying screws(φ3.5×20). 1. Install the Bracket in a position 40-60 mm inward from each end of the Track with avoiding the resin parts. If you use Brackets three or more, attach them to be equal intervals.
Bracket installation (Not necessary for ceiling attachment)1
1. Tilt the Louver.
2. Remove the Louver by pulling down.
Removing the Louver4
Installing the Track
In the case of attaching on the Bracket1) Hang the Track on the temporal hook of each Bracket.
2) Push in the main unit until it clicks into place.
2
2. Rotate the Operation Wand, and adjust in a state of Louver Hangers at right angles with the Track.
*If you attach Louvers without doing Louver Hangers in the right angle of Track, Louvers might not rotate property.
Installing the Louver
1. Gather Louver Hangers on one side. In the case of split draw, gather on both sides.
*In the case of left operation, illustration is reversed and the positional relationship is opposite.
3
3. Align the front and back side of the Louver in the same direction, and insert the hanger part from below to Louver Hanger.
Back
Front
Folding part side
〈For Sewing processing〉
Folding part side
Back
Front
〈Heat welding processing〉
Louver Hanger
Hanger part
Installing surface
1. Tilt the Louver
2. Pull down
L-shapeWall Fixing Aid
Easy Snap Ceiling BracketPush
all the way in
Outer groove of the Track
Equal interval Equal interval
Bracket
40-60 mm 40-60 mm
Track
Louver Hanger Cord
〈Ex. Right side control, drawn to right〉 〈Ex. Right side control, drawn to left〉 〈Ex. Split draw, right side control〉
Operation Wand
*Illustration shows cord & wand type.
Interior side
Exterior side
Interior side
Exterior side
Interior side
Interior side
Exterior side
Exterior side
Ceiling installation(Required one screw for one Bracket.)
Wall installation(Required three screws for one Bracket.)
DUAL / DUAL SHAPE / DUAL SEEZ / DUAL OVERLAP
Interior side
Exterior side
Interior side
Exterior side
Removing the Track (For attaching on the Bracket)
1. While pressing the release button of the Bracket, pull it toward you.
2. Remove the main unit from the temporal hook.
5
Attaching the Safety Tassel6
Cord for opening and closing operations is attached in the product, but there is a risk that Cord becomes the cause of unexpected accidents. In order to avoid accidents, we equipped a Safety Tassel. Please bundle the Cord with a Safety Tassel at a position where child's hand does not reach.
Material: plastic moldedColor: White
Installing surface
■If you install at the corner
Product width of the side where the sunlight enters, should be longer.
Operation side
Operation side
Sunlight
10–20 mm
How to Take Measurements
■In the case of installing on the inside window frame (Ceiling installation)
■In the case of installing on the outside window frame (Wall installation)
・Product width is subtracted 10 mm from actual inside width of window frame. ・Product height is subtracted 20 mm from actual inside height of
window height. ・If you are installing the product on the inner side of the curtain
box, product width is subtracted about 10 mm of the inside width of the box. Product height is subtract about 20 mm of the inside height of the box from the top to the �oor.
*In the case of direct ceiling installation, product height will be shorter 7 mm of the Bracket thickness.
・In the case like a �gure, refer to page 20 about the length of Operation Wand, and Cord.
Large sliding door
・Product width should be the same as the outside width of the window frame. If you want to install larger than window frame, product width should be more longer 100 mm on both sides than the outside width of window frame. ・Product height should be subtracted about 20 mm from the
headrail-to-�oor height.
Ordinary window
・Product width should be the same as the outside width of the window frame. If you want to install larger than window frame, product width should be more longer 100 mm on both sides than the outside width of window frame. ・Product height should be longer about 100 mm than the
dimension from headrail to bottom of the window frame. ・Be aware that, if not speci�ed, the Operation Wand and Cord
lengths may be short.
Height
Width
20 mm
20 mm
Floor
Height
Width
Height
Width
20 mmFloor
Floor
Height
Width
Floor
100 mm
Wall BracketPull toward you
Push
Bracket
Track
Bracket
Track
Bracket
Track
BracketTrack
Cord
Ring
Safety Tassel
*Bundle the Cord.Safety Tassel
Pro
duc
t he
ight
(H)
Pro
duc
t he
ight
(H)
Pro
duc
t he
ight
(H)
Pro
duc
t he
ight
(H)
Hea
dra
il-to
-�oo
r he
ight
(h)
21 22
Installation Method
Interior side
Interior side
Exterior side
Exterior side
2. Fit the Bracket with accompanying screws(φ3.5×20).
Push all the way in
Ceiling installation(Required one screw for one Bracket.)
Wall installation(Required three screws for one Bracket.)
Interior side
Exterior side
Interior side
Exterior side
1. Install the Bracket in a position 40-60 mm inward from each end of the Track with avoiding the resin parts. If you use Brackets six, attach them to be equal intervals between the end of Track and joint part.
Bracket installation (Not necessary for ceiling installation)1
Installing the Track
In the case of attaching on the Bracket1) Hang the Track on the temporal hook of each Bracket.
2) Push in the main unit until it clicks into place.
3
The jointed track method2
2. Rotate the Operation Wand, and adjust in a state of Louver Hangers at right angles with the Track.
*If you attach Louvers without doing Louver Hangers in the right angle of Track, Louvers might not rotate property.
Installing the Louver
1. Gather Louver Hangers on one side. In the case of split draw, gather on both sides.
*In the case of left operation, illustration is reversed and the positional relationship is opposite.
4
3. Align the front and back side of the Louver in the same direction, and insert the hanger part from below to Louver Hanger.
Back
Front
Folding part side
〈For Sewing processing〉
Folding part side
Back
Front
〈Heat welding processing〉
Louver Hanger
Hanger part
Installing surface
L-shape Wall Fixing Aid
Easy Snap Ceiling Bracket
Outer groove of the Track
Equal interval
Equal interval
Bracket
40-60 mm 40-60 mm 40-60 mm 40-60 mm
Track
〈Ex. Split draw, right side control〉
With a jointed track
1) Face the joint portion of the Track each other, so as
not to tangled the Cord.
2) Insert the Joint Plate L on one side of the Track, and
�x with the Joint Plate L mounting screws (special
countersunk M4). *Be sure to fix with two screws.
3) Insert the Joint Shaft into the hole in which the shaft is connected, and �t to the tip of shaft.
4) Plug the Joint Plate S into the hole in the �gure, and
�x the Joint Plate S with a mounting screw (pan M3).
5) Insert the Joint Plate L/S, and Joint Shaft to each holes of the opposite side of the Track, so as not to pinch the Cord.
6) Make sure that there is no gap in the joint portion, �x the Joint Plate L with two of mounting screws (special countersunk M4) and Joint Plate S with a mounting screw (pan M3).
①
②Joint Plate L Joint Shaft
Joint Plate S
Joint Plate S
Joint Plate L
Joint Shaft
*In the case of direct ceiling installation, it cannot to be installed the Bracket within 60 mm from the joint part.
DUAL / DUAL SHAPE / DUAL SEEZ / DUAL OVERLAP
Interior side
Exterior side
Interior side
Exterior side
Cord for opening and closing operations is attached in the product, but there is a risk that Cord becomes the cause of unexpected accidents. In order to avoid accidents, we equipped a Safety Tassel. Please bundle the Cord with a Safety Tassel at a position where child's hand does not reach.
Material: plastic moldedColor: White
Cord
Ring
Safety Tassel
*Bundle the Cord.Safety Tassel
1. Tilt the Louver.
2. Remove the Louver by pulling down.
Removing the Louver5
Removing the Track (For attaching on the Bracket)
1. While pressing the release button of the Bracket, pull it toward you.
2. Remove the main unit from the temporal hook.
6
Attaching the Safety Tassel7
Installing surface
1. Tilt the Louver
2. Pull down
■If you install at the corner
Product width of the side where the sunlight enters, should be longer.
Operation side
Operation side
Sunlight
10–20 mm
How to Take Measurements
■In the case of installing on the inside window frame (Ceiling installation)
■In the case of installing on the outside window frame (Wall installation)
・Product width is subtracted 10 mm from actual inside width of window frame. ・Product height is subtracted 20 mm from actual inside height
of window height. ・If you are installing the product on the inner side of the curtain
box, product width is subtracted about 10 mm of the inside width of the box. Product height is subtract about 20 mm of the inside height of the box from the top to the �oor.
*In the case of direct ceiling installation, product height will be shorter 7 mm of the Bracket thickness.
・In the case like a right �gure, refer to page 167 on Japanese Catalog about the length of Operation Wand, and Cord.
Large sliding door
・Product width should be the same as the outside width of the window frame. If you want to install larger than window frame, product width should be more longer 100 mm on both sides than the outside width of window frame. ・Product height should be subtracted about 20 mm from the
headrail-to-�oor height.
Ordinary window
・Product width should be the same as the outside width of the window frame. If you want to install larger than window frame, product width should be more longer 100 mm on both sides than the outside width of window frame. ・Product height should be longer about 100 mm than the dimension
from headrail to bottom of the window frame. ・Be aware that, if not speci�ed, the Operation Wand and Cord lengths
may be short.
Width
20 mm
Floor
Floor
Floor
Width Width
Wall BracketPull toward you
Push
20 mm
Floor
Height
Width
Bracket
Bracket
Bracket
Bracket
Track
Track
Head Rail
Track
Height
Height
Pro
duc
t he
ight
(H)
Pro
duc
t he
ight
(H)
Pro
duc
t he
ight
(H)
Pro
duc
t he
ight
(H)
Height
20 mm 100 mm
Hea
drai
l-to-
�oor
hei
ght (
h)
23 24
How to Order DUAL / DUAL SHAPE / DUAL SEEZ / DUAL OVERLAP
Choose your type of vertical blinds. e.g.) DUAL
Specify your Louver number. e.g.) TF-4001
*In general, we choose white unless otherwise speci�ed. Specify your color of brown. If you want to change.
STEP 03
Specify your Louver width. e.g.) Louver width: 100 mmSTEP 02
Specify the dimensions (width and height) of the product. e.g.) Width: 2,000 mm, height: 2,000 mm
Specify the dimensions (width and height) of the product to round down the nearest 10 mm. *Product height is from top of the Bracket to bottom of the Louver (not include the thickness of the L-shape Wall Fixing Aid). *In the case of direct ceiling installation, product height will be shorter 7 mm of the Bracket thickness.
〈DUAL SEEZ—additional points〉Specify the design type of laser cut (TYPE 03–21) and Louver placement (either alternate or all patterned). Also specify the patterning position (either top or bottom) for the TYPE 09 · 13 · 19 · 20 · 21.
〈DUAL SHAPE—additional points〉Specify the design type (style A – D).
STEP 04
Specify which installation method you choose: ceiling installation or wall installation. e.g.) Ceiling installation
*In the case of direct ceiling installation, the product height will be shorter by the thickness of Bracket part.
STEP 06
Select your part color. e.g.) BrownSTEP 08
Specify the Bottom Weight choice.STEP 09
STEP 11 Specify the quantity. e.g.) 1 set
STEP 10
Specify the height from the top of the Bracket to the �oor (headrail-to-�oor height). e.g.) Headrail-to-�oor height: 2,020 mm
*Specify the headrail-to-�oor height of the operation side.*If you do not specify the headrail-to-�oor height, the length of Operation Wand and Cord are determined by product height. For more information, refer to each product speci�cations page.
STEP 05
Select your operational choice. e.g.) One-way draw, right side control, drawn to right.
Cord & wand type (Standard)
Right side control, drawn to right
Left side control, drawn to left
Two one-way draws set side-by-side for center opening
Right side control
Left side control
Split draw
Right side control, drawn to right
Right side control, drawn to left
Left side control, drawn to left
Left side control, drawn to right
One-way draw
Right side control
Left side control
Split-draw / 2-on-1 headrail blind+3,500 Yen (tax excluded) *
STEP 07
STEP 01
*Louver width of DUAL OVERLAP is 100 mm only.*DUAL SHAPE is not required to specify the Louver width.
Specify the optional parts, If you need one. e.g.) Additional wand for a both-side operation
●Without Bottom Cord: No additional charge●Additional wand for a both-side operation: 3,500 Yen (tax excluded) *Do not correspond to the two one-way draws set side-by-side for center opening. ●Split draw / 2-on-1 headrail blind: 3,500 Yen (tax excluded) *Available cord & wand type only.●With a jointed track *Available cord & wand type only. ●Bracket spacer 12, 22 For more information, refer to page 19.
*Bottom Weight color is the standard color of each Louver. *Specify the Bottom Weight choice if you want to change.*DUAL SHAPE is buckled type only. (Not available the french seam type.)
Right side control, drawn to left draw
Left side control, drawn to right
Right side control
Left side control
Jointed track(Option)
Wand type (Option)No additional charge *
One-way draw Split draw
*Not available if the product height and headrail-to-�oor height are 3,010 mm or more.
Ord
er F
orm
D
UA
L /
DU
AL
SHA
PE /
DU
AL
SEEZ
/ D
UA
L O
VER
LAP
*Ho
w t
o �
ll in
th
e o
rder
sh
eet,
ref
er t
o p
age
25
.
Pro
du
ct S
ize
Wid
th×
Hei
gh
tB
ott
om
Wei
gh
tC
ho
ice
□ D
UA
L□
80
mm
□ 1
00
mm
TF
-
×
mm
mm
set(
s)
□ W
hit
e (
Sta
nd
ard
)
□ B
row
n
Sty
leP
rod
uct
Siz
eW
idth×
Hei
gh
tB
ott
om
Wei
gh
tC
ho
ice
□ D
UA
L S
HA
PE
TF
-□
sty
le A
□ s
tyle
C
□ s
tyle
B
□ s
tyle
D
Des
ign
TY
PE
TY
PE
□ A
ll p
atte
rn
□ E
very
oth
er
*TY
PE
09・1
3・19・2
0・21
onl
y
□ U
pp
er p
atte
rn
□ L
ow
er p
atte
rn
×
mm
mm
set(
s)
□ W
hit
e (
Sta
nd
ard
)
□ B
row
n
Pro
du
ct S
ize
Wid
th×
Hei
gh
tB
ott
om
Wei
gh
tC
ho
ice
×
mm
mm
set(
s)
□ D
UA
L S
EE
Z□
80
mm
□ 1
00
mm
TF
-□
Wh
ite
(
Sta
nd
ard
)
□ B
row
n
Pro
du
ct S
ize
Wid
th×
Hei
gh
tB
ott
om
Wei
gh
tC
ho
ice
□ D
UA
L O
VE
RL
AP
□ 1
00
mm
TF
-
×
mm
mm
set(
s)
□ W
hit
e (
Sta
nd
ard
)
□ B
row
n
Pro
du
ct N
ame
Lo
uve
r W
idth
Lo
uve
r N
um
ber
Pro
du
ct N
ame
Lo
uve
r N
um
ber
Pro
du
ct N
ame
Lo
uve
r W
idth
Lo
uve
r N
um
ber
Pro
du
ct N
ame
Lo
uve
r W
idth
Lo
uve
r N
um
ber
Op
erat
ion
alC
ho
ice
Op
erat
ion
alC
ho
ice
Op
erat
ion
alC
ho
ice
Op
erat
ion
alC
ho
ice
Hea
dra
il-to
-�o
or
Hei
gh
tP
art
Co
lor
Op
tio
nQ
uan
tity
Hea
dra
il-to
-�o
or
Hei
gh
tP
art
Co
lor
Op
tio
nQ
uan
tity
Hea
dra
il-to
-�o
or
Hei
gh
tP
art
Co
lor
Op
tio
nQ
uan
tity
Hea
dra
il-to
-�o
or
Hei
gh
tP
art
Co
lor
Op
tio
nQ
uan
tity
Inst
alla
tio
nM
eth
od
Inst
alla
tio
nM
eth
od
Inst
alla
tio
nM
eth
od
Inst
alla
tio
nM
eth
od
□ B
uck
led
typ
e
□ F
ren
ch S
eam
typ
e
B
uck
led
typ
e
□ B
uck
led
typ
e
□ F
ren
ch S
eam
typ
e
□ B
uck
led
typ
e
□ F
ren
ch S
eam
typ
e
25 26
How to Order
DUAL — Stripe Pattern / Color Combination
Choose your pattern type. e.g.) DUAL stripe pattern
80 mm / 100 mm / 100 mm overlap
DUAL stripe pattern / DUAL color combination
Specify your Louver width. e.g.) Louver width: 100 mmSTEP 02
Specify the dimensions (width and height) of the product. e.g.) Width: 2,000 mm, height: 2,000 mm
Specify the dimensions (width and height) of the product to round down the nearest 10 mm. *Product height is from top of the Bracket to bottom of the Louver (not include the thickness of the L-shape Wall Fixing Aid).
STEP 03
Select your part color.STEP 07
Specify the Bottom Weight choice.STEP 08
Specify the optional parts, If you need one. STEP 09
Specify the quantity.STEP 10
Specify the height from the top of the Bracket to the �oor (headrail-to-�oor height). e.g.) Headrail-to-�oor height: 2,020 mm
1. If you chose the Stripe Pattern.STEP 11
*If you do not specify the headrail-to-�oor height, the operation baton and cord may be short.*If you do not specify the headrail-to-�oor height, the length of Operation Wand and Cord are determined by product height. For more information, refer to page 20.
STEP 04
STEP 01
*Bottom Weight color is the standard color of each Louver. *Specify the Bottom Weight choice if you want to change.
*In general, we choose white unless otherwise speci�ed. Specify your color of brown. If you want to change.
① Specify the pattern. e.g.) 1 : 1
② Specify the Louver number of start color (a). e.g.) a=TF-4001
③ Specify the Louver number (b) combined with the start color (a). e.g.) b=TF-4002
1:1 2:1 2:2
2. If you chose the Color Combination.
①
②
Specify the total number of Louvers. e.g.) 15 pieces*Con�rm the total number of Louvers in the louver number table at Japanese catalog page 200–. The number of Louvers will vary depending on the product type and size.
Specify the Louver number and quantity of the start color (a) and its combined color (b).
e.g.) Brown
e.g.) Additional wand for a both-side operation
e.g.) 1 set
Specify which installation method you choose: ceiling installation or wall installation.STEP 05 e.g.) Ceiling installation
*In the case of direct ceiling installation, product height will be shorter 7 mm of the bracket thickness.
Select your operational choice. STEP 06 e.g.) One-way draw, right side control, drawn to right
e.g.) TF-4001 (a): 3, TF-4002: 3, TF-4003: 3, TF-4004: 3, TF-4005: 3
Color a
Color b
Color a
Color b
Color a
Color b
1 repeat1 repeat1 repeat
Color a
*Not available if the product height and headrail-to-�oor height are 3,010 mm or more.
DUAL — Stripe Pattern / Color Combination
Cord & wand type (Standard)
Right side control, drawn to right
Left side control, drawn to left
Two one-way draws set side-by-side for center opening
Right side control
Left side control
Split draw
Right side control, drawn to right
Right side control, drawn to left
Left side control, drawn to left
Left side control, drawn to right
One-way draw
Right side control
Left side control
Split-draw / 2-on-1 headrail blind+3,500 Yen (tax excluded) *
Right side control, drawn to left draw
Left side control, drawn to right
Right side control
Left side control
Jointed track(Option)
Wand type (Option)No additional charge *
One-way draw Split draw
●Without Bottom Cord: No additional charge●Additional wand for a both-side operation: 3,500 Yen (tax excluded) *Do not correspond to the two one-way draws set side-by-side for center opening. ●Split draw / 2-on-1 headrail blind: 3,500 Yen (tax excluded) *Available cord & wand type only.●With a jointed track *Available cord & wand type only. ●Bracket spacer 12, 22 For more information, refer to page 19.
Ord
er F
orm
D
UA
L st
rip
e p
atte
rn /
co
lor c
om
bin
atio
n
Pro
du
ct S
ize
Wid
th×
Hei
gh
tB
ott
om
Wei
gh
tC
ho
ice
□ D
UA
L
stri
pe
pat
tern
□ D
UA
L
colo
r co
mb
inat
ion
□ 8
0 m
m
□ 1
00
mm
□ 1
00
mm
/ O
verl
ap
×
mm
mm
set(
s)
□ W
hit
e (S
tan
dar
d)
□ B
row
n
□ B
uck
led
typ
e
□ F
ren
ch S
eam
typ
e
Pro
du
ct N
ame
Lo
uve
r W
idth
Inst
alla
tio
nM
eth
od
Op
erat
ion
alC
ho
ice
Hea
dra
il-to
-�o
or
Hei
gh
tP
art
Co
lor
Op
tio
nQ
uan
tity
*Ho
w t
o �
ll in
th
e o
rder
sh
eet,
ref
er t
o p
age
27
.
□ 1
: 1
□ 2
: 1
□ 2
: 2
TF
-C
olo
r a
■ C
ho
ose
th
e p
atte
rn.
■ S
pec
ify
each
co
lor
nu
mb
er.
TF
-C
olo
r b
*Lo
uve
rs a
re p
ac
ked
to
ge
the
r in
ea
ch
pro
du
ct
nu
mb
er.
Pla
ce
th
em
in
th
e c
orr
ec
t p
osi
tio
n a
t th
e t
ime
of
inst
alla
tio
n.
[S
trip
e P
atte
r]
Co
lor
a
Co
lor
b
Co
lor
a
Co
lor
b
Co
lor
a
Co
lor
b
[C
olo
r C
om
bin
atio
n]
Co
lor
a
110
2030
4050
Co
lor
Nu
mb
er
Sh
eet
TF-
TF-
TF-
TF-
TF-
TF-
TF-
TF-
TF-
TF-
■ F
ill in
co
mb
ined
eac
h L
ou
ver
nu
mb
er a
nd
qu
anti
ty.
TF
-C
olo
r a
■ S
pec
ify
the
colo
r a.
TF-
TF-
TF-
TF-
TF-
TF-
TF-
TF-
TF-
TF-
TF-
TF-
TF-
TF-
TF-
TF-
TF-
TF-
TF-
TF-
TF-
TF-
TF-
TF-
TF-
TF-
TF-
TF-
TF-
TF-
shee
ts
■ T
ota
l nu
mb
er o
f L
ou
ver
*Con
�rm
the
tot
al n
umb
er o
f Lou
vers
in t
he
Lou
ver
num
ber
tab
le a
t Ja
pan
ese
cata
log
pag
e 20
0–.
Co
lor
Nu
mb
er
Sh
eet
Co
lor
Nu
mb
er
Sh
eet
Co
lor
Nu
mb
er
Sh
eet
27 28
Certification Mark List (Standards Valid in Japan)
Fire Retardant
Washable
SEK – Antimicrobial and Deodrant Processed Odor Eliminating
Common ScreenProducts in Accordance with Formaldehyde Standards
Mirror Thermal Barrier
Properties under �re prevention measures (speci�ed under Fire Service Act) shall
use �re retardant products. Be sure to use �re retardant products. These vertical
blinds are fire retardant products by TOSO, a fire-retardant mark qualified
company registered at Fire and Disaster Management Agency.
Remove the Louver, and easy to wash at home washing machine.
After dehydration, Louver becomes clean finish in ironing.
a. Washing method (with water)
b. Propriety of chlorine bleaching
c. Ironing method d. Dry cleaning e. Wring f. Drying method
Liquid temperature should be limited to 30˚C, and it is good in weak water �ow setting of washing machines, or weak hand washing.
Impossib le to b leach with chlorine bleach.
Using a wash net
I ron is l imi ted to 160˚C, and it must be ironed from over the presser cloth at moderate temperatures (up to 140˚C–160˚C).
Do not wring.D r y c l e a n i n g i s impossible.
Dry in the shade is good.
・Wash alone using a wash net.・Do not iron accessories attached on the fabric.・Do not use the tumbler drying.・Keep the dehydration about 30 seconds.・If you mind some wrinkled parts, iron them out with holding down.
SEK mark guarantees that the said product has met
cr i te r ia set by Japan Text i le Eva luat ion Technology
Council, assuring the quality and safety of antibacterial
and deodorant processing.
Ant ibacter ia l and deodorant processing, to
suppress the growth of bacteria on the fiber with
deodorization effect, is applied. This is SEK mark
certified products to ensure quality and safety.
A b s o r b s a n d b r e a k s
down the components
that causes bad odor.
All series Vertical Blind, TOSO product, has met form-
aldehyde standards set by Interior-fabrics Performance
Evaluation Conference.
By applying a gloss on the back side
of the Louver and reflecting the light,
it is difficult to see inside the room
from outside, during the day.
H a s s p e c i a l t r e a t m e n t o r u s e s
spec ia l ma te r i a l s t ha t enhances
thermal barrier effects.
Fire Retardant Mark
Common with Roller Blinds
Common with Pleated Blinds
Common with Pannel Doors
Common with Tiard
Fire Retardant Label Rool Pleated Pannel Tiard
エンソサラシ
中ドライ弱
ネット使用
30中性
エンソサラシ
中ドライ弱
ネット使用
30中性
エンソサラシ
中ドライ弱
ネット使用
30中性
エンソサラシ
中ドライ弱
ネット使用
30中性
エンソサラシ
中ドライ弱
ネット使用
30中性
エンソサラシ
中ドライ弱
ネット使用
30中性
■ Because the color of photograph is print, it might be a little different from the actual goods.■ Due to various reasons, we might carry out the specification change or production stop without notice.■ In the case of failure and damage, due to improper usage, improper repair and remodel, or non-genuine parts usage, we can not assume responsibility.■ Consumption tax and installing cost do not include to the price. (as of October 2013)
Request to constructors
For product warranty (three years guarantee of the relief)
Notice for constructors and retail stores
Instruction manual attached with the product, be sure to pass it to customers, after the product installed.
1. Install the product after reading the introduction manual carefully.
2. When installing the rail and bracket, fix them surely with screws suitable for the material and structure of mounting parts. (Screws attached to the product are exclusive use for wood part.)
3. Be sure to observe the mounting number of bracket, because it will be the cause of the falling down.
4. Install the product horizontally. (Slope window is excluded.)
1. Install the product after reading the introduction manual carefully.
2. When installing the rail and bracket, fix them surely with screws suitable for the material and structure of mounting parts. (Screws attached to the product are exclusive use for wood part.)
3. Be sure to observe the mounting number of bracket, because it will be the cause of the falling down.
4. Install the product horizontally. (Slope window is excluded.)
5. Do not hang from the body of Vertical Blind.6. If your hand or foot is caught in the operation
cord and bottom cord, i t may cause an unexpected accident. Pay particularly enough attention that a child will not be caught in his or her neck.
This product is delivered under strict quality control, but if it has failure within three years after purchasing by normal use in accordance with the instruction manual, body care label, and tag, we will repair it. More information about after-sales service regulations, refer to the instruction manual (Louver parts are excluded).
Because the Waste Disposal and Public Cleansing Law (Waste Management Law) has been amended from December 1997, the existing sample book that became unnecessary due to issue new sample book has also become necessary to handle as industrial waste. Accordingly, we would like to request you to commission directly to the industrial waste disposers having appropriate qualifications. In our industry, we are going to promote further appropriate disposal of conventional waste as before. We hope your understanding and cooperation.
Nippon Interior Fabrics Association (NIF)TOSO COMPANY, LIMITED
Caution Installation method Caution Operation method
Blackout
Blocks sunlight and prevents glare. Suitable for windows in a sunroom, a room exposed to the afternoon sun
or a bedroom (Protects direct sunlight but, due to its structure, can not guarantee a 100% shielding. Not
suitable for use as a darkroom to perform film developing and printing).
Shielding Grade 1Light Shielding Ratio 99.9% or moreLevel where almost impossible to distinguish a person's face.
Shielding Grade 2Light Shielding Ratio 99.80% or over, less than 99.99%Level where possible to recognize a person's face or expression.
Shielding Grade 3Light Shielding Ratio 99.40% or over, less than 99.80%Level where possible to recognize a person's expression but too dark for office work.
The Cord or the Chain can wind around your child and he or she may entangle it.It may lead to an hazardous accident.
Japan Window Blind Association
Energy SavingPhotocatalyst Green Procurement Conforming Product
Effects energy
saving.
Causing a chemical reaction in
the ultraviolet rays of sunlight
or fluorescent light, and then
decompose the harmful sub-
stances odor.
Provides air space between the
inside and the outside of a room
and brings heat insulating effects.
Maintenance Sticker
● For preventive maintenance, a maintenance sticker attached to the product you bought. Please refer to the sticker in case you need to contact us or repair the blind.
● With the bar code reader of your mobile phone, you can read a 2-dimensional bar code on the sticker and access our site to get the product information.*Attention: you may not be able to read the bar code if the sticker gets dirty or damaged.
■ Date of Production:■ Product Name:
■ Serial Number:
DUAL100 One-way draw, drawn to right TF-**** 2000 × 2000Product Name Drawn Style Color No. Product
WidthProductHeight
Made in Japan
This shows you the date of production.
This shows you the following information:
**, **, ****DUAL100 One-way draw, drawn to rightTF-**** 2000 × 2000************
Cord
Operation Wand
Track*Back side of Track
29 30