VERTI-LOK Design Features ROCK-LOKDesign Features Roofing€¦ · ROCK-LOKDesign Features Roofing...
Transcript of VERTI-LOK Design Features ROCK-LOKDesign Features Roofing€¦ · ROCK-LOKDesign Features Roofing...
Metal Roofing
ROCK-LOK
Design Features• Approved for metal decking and wood
decking applications• Architectural concealed fastener panel• 16ʺ width coverage• Mechanically seamed 2ʺ seam height• Minimum roof slope 1/12 pitch• 24 gauge• Available in flat pan and ribbed options• Architectural Applications
Applied over decking
VERTI-LOK
Design Features• Approved for metal decking and wood
decking applications• Architectural concealed fastener panel• 16ʺ width coverage• 1-3/4ʺ seam height• Minimum roof slope 2/12 pitch• 24 gauge• Snap-Lock design• Anti-siphon channel side lap design• Available in flat pan and ribbed options• Architectural Applications
Applied over decking
Material• Galvalume • SemCoat Plus
Material• Galvalume • SemCoat Plus
VERTI-LOK ROCK-LOK
Metal Roofing Beauty That Lasts!
Authorized Dealer
Approvals: TDI • MIAMI-DADE • UL • FL CODEApprovals: TDI • MIAMI-DADE • UL • FL CODE
Trusted Quality Tested Strength®
PBR & R PANELS
Design Features• Architectural/structural exposed
fastener panel• 36ʺ width coverage roofing (PBR)• Or siding (R-Panel)• 12ʺ on center spacing major ribs
with 2 equally spaced stiffening ribs between major ribs
• 1-1/8ʺ major rib height• Minimum roof slope 1/12 pitch• PBR – 26 and 24 gauge• R – 29 gauge • Architectural and Structural
Applications Applied over decking and over open framing
SEM-LOK
Design Features• Architectural concealed fastener
standing seam panel• 16ʺ width coverage• 1ʺ seam height• Minimum roof slope 2/12 pitch• Hemmed snap lock design• Low gloss paint finish• 26 and 24 gauge• Anti-siphon channel side lap design• Available in Ribbed, Flat or Striated• Nail fin design with slotted holes
for attachment• Architectural Applications
Applied over decking
5-V CRIMP
Design Features• Architectural exposed
fastener panel• 24ʺ width coverage• 7/16ʺ height inverted V(s)• Minimum roof slope 3/12 pitch• Utility, 29, 26 and 24 gauge• Anti-siphon channel side
lap design• Architectural Applications
Applied over decking
Material• Galvanized Steel or Galvalume • SemCoat SP or SemCoat Plus
2-1/2ʺ & 1-1/4ʺ CORRUGATED
Design Features• Architectural exposed
fastener panel• 24ʺ width coverage (siding) and
21-1/2ʺ width coverage (roof) • 1-1/4ʺ and 2-1/2ʺ corrugations
on center spacing availability• 1/4ʺ or 1/2ʺ corrugation height• Minimum roof slope 3/12 pitch• Utility, 29, 26 and 24 gauge• Architectural Applications
Applied over decking
Material• Galvanized Steel or Galvalume • SemCoat SP or SemCoat Plus
2-1/2ʺ CORRUGATED
SEM-LOK
SM-RIB
Design Features• Architectural exposed
fastener panel• 36ʺ width coverage• 9ʺ on center spacing major ribs
with 2 equally spaced stiffening ribs between major ribs
• 3/4ʺ major rib height• Minimum roof slope 3/12 pitch• 29 and 26 gauge• Anti-siphon channel side
lap design• Architectural Applications
Applied over decking
SM-RIB
5-V CRIMP
www.semetals.comTechnical Support 800.SE Specs 800.737.7327
• Lasts longer than conventional roofing
• Low maintenance
• Color matched accessories and trims
• Fire-resistant and non-combustible
• May reduce insurance premiums
• Energy efficient
• Superior warranty
• Impact resistant to hail
• Good value-to-life cycle cost
• Enhances resale value
• 100% recyclable
• Attractive appearance
PBR-PANEL RECOMMENDED FOR ROOFING
Metal Roofing Beauty That Lasts!
1-1/4ʺ CORRUGATED
R-PANEL RECOMMENDED FOR SIDING ONLY
Material• Galvanized Steel or Galvalume • SemCoat SP or SemCoat Plus
Approvals: TDI • MIAMI-DADE • UL • FL CODE
See individual product descriptions for applicable certifications.
Trusted Quality. Tested Strength.
Residential • Commercial • Agricultural • Industrial
A complete line of roof and wall panel systems
Metal Roofing Beauty That Lasts! Trusted Quality. Tested Strength.
Residential • Commercial • Agricultural • Industrial
Material• Galvanized Steel or Galvalume • SemCoat SP or SemCoat Plus
Material• Galvalume • SemCoat Plus
Approvals: UL • FL CODE
RIBBED
Approvals: TDI • MIAMI-DADE • UL • FL CODE Approvals: TDI • UL • FL CODE Approvals: MIAMI-DADE • UL • FL CODE