VERSION DESCRIPTION DOCUMENT - Inspect 3D · • Wenzel WPC 2030 (2020, 2010 compatible also) •...

VERSION DESCRIPTION DOCUMENT

Last modification: 2010-11-03 Responsible: Stéphane PÉNEAU (Inspect 3D) Software version: V.3.0.0.0 patch (1…8)

Date of print 2010/11/03 14 page(s)

VDD_INCA3D_English_2010_11_03_V_3_0_0_8.doc of 14 Form I3D-VDD001

Release Date:

� 2010-02-01 General Advantages:

� compatible with Microsoft Windows 7 � CMM drivers

• SB electronics CNC06 and CNC09 • Pantec WPC 2030 (2020, 2010 compatible also) • Wenzel WPC 2030 (2020, 2010 compatible also) • Aberlink DCC CMM • BACES3D articulated arm • Deva 004 CNC • Creaform HandyPROBE • Krypton – TCP-IP • Tesa Microval

Extensions:

• Measuring path wizard o Real time calculation according to parameters modification when gear near calculation

button is green

• Display measuring path with different colors

o Entering RED, exiting YELLOW see picture above • Report direct shortcut to several report format

o o The three models are saved in *.orp file in /user folder (“ReportModel1Parameter.orp”) o ReportModelNParameter.orp can be loaded in report windows to be modified


• Ability to project on surface trimmed surface without restriction

o • Pantec.Cmm.Driver

o Integration of new driver from Pantec WPC 2030 (compatible with WPC2020, WPC 2010)

o Management of Pantec joystick HT400 in Inca3D � F1: Ok � F2: Cancel � F3/F4: Previous/Next, � F5: Capture gage point � F6…F11 Customizable Toolbar function

• Surface measurement o Search distance default value is now set to 3 mm o New parameters in surface measurement, to measure on the first surface “Top surface

detection”. This option will remove wrong solution on CAD files with 2 skins (especially for sheetmetal part)

�

�

• Probe orientation preview before selection o When selecting a new probe orientation Inca3D displays the new probe orientation in

light green as an help before performing the rotation


o o

• Counter window o Displaying grey background when axis is not activated on the joystick

• Surface alignment by macro

o Ability to set thickness on created action

o Ability to create measured element when activating in the parameter windows

o

Usable Operating Systems: � Windows™ Seven (32 bits without aero);Windows™ Vista (32bits)(without aero),

Windows™ XP Pro (32 bits), Windows™ 2000, � Compatibility of the hardware device, Counter Card, Link to DCC must be check separately

with the hardware provider � INCA3D installation and License Key Installation must be performed with Windows™

administrator right. Multiplex Configuration:

� Working directories /CAD and /OperationSequence should be same shared directories on all PC’s.

Dongle driver:

Download at http://www.inspect-3d.com/english/software/download.htm - For Windows Vista, Seven, XP and 2000


1- Install first HASP HL Driver V5.22: haspusersetup.exe (V5.22) 2- Then install HASP4 Device Drivers V 5.22 : hdd32.exe (HASP4 V 5.22)

Remarks

Some of the functions and improvements described in this document may not be available for your INCA3D license depending on Package and options. Contact us for further details

Documentation updates: � 2009-02-09 English Help Version E.1.17 � 2009-02-09 German Help Version G.1.5 � 2009-02-09 French Help Version F.1.8

Valid Maintenance Date needed: � 2010-02-01

Solved Software – Reports:

R3198: “ Graphical programming for grid : ability to move the grid starting point in u & v direction,

and display move in real time. SP Cursor under u&v vector” DONE R3235: “ There is no fast click button to delete last measuring path. For manual machines it is time

consuming.” DONE R3252: “ Working with I++, the name of the probes are usually TOOL1_A0.0_B0.0… If I want to

modify offline a program of my customer, I need to have this same name probe. So I need an option to modify the name of the probes working virtually” DONE

R3263: “ Can you please sort the list of probes (probe directions) according to their angle” DONE R3277: “ In global modification of probe, be able to sort list of probes by Reference/angles” DONE R3262: “ Action by n points: if I Drag & Drop from the editor a list of actions and the Multiple

creation list elements window is displayed : Highlight current selected elements in graphic view like in Action Parameters Listbox” DONE

R3265: “ Improving speed of insert cursor move inside large operation sequence > 10000 lines” DONE

R3280: “ When we read a file, sometimes the file is open with Read-Write access even if it is not necessary” DONE

R3310: “ When switch from a machine driver to another machine driver, do not display any error message if some parameters are not filled correctly” DONE

R3315: “ Plane path wizard : when you modify the distance value it is not updated in the graphic view unlike other parameters (primary length, number of points U-V …).To update the distance you need to click on the button "calculate the measuring path"” DONE

R3332: “ Possibility to deactivate the double buffering in OpenGL. Add a new check to activate/deactivate in Graphical View Parameter Window, TabSheet Rendering.” DONE

R3330: “ Introduce volumetric length deviation MPEe to tolerances of Iinca3D. For machine acceptance procedure. Value is given by MPEe = A µm + (L / P) Mm, where A and P are input parameters and L is the length” DONE

R3329: “Deva driver : Add a new possibility for the joysticks: Rotate the X-Y axis in order to drive the machine when user stands on the back or the side of the machine” DONE

R3347: “ Hide the window asking for the teach selection parameters. Parameter used is "Clear Measuring path"” DONE

Bug fix:

R3258: “ Kreon calibration file is not registred in Inca3D log file then not automatically added to

HLM file” FIXED R3278: “ Driver Romer GDS. Start the driver when Open/Save dialog is displayed because if start

at the beginning sometimes we cannot import from GDS tools available” FIXED R3311: “ Inca3D is started. If start config to change machine geometrical definition, modification

are no more applied when click on save” FIXED R3301: “ If 2 Load Cad file actions in an operation sequence, when load/unload an error occurs

and Inca3D is closed.” FIXED R3307: “ Management of User profile with different user directory for each user” FIXED R3331: “ If change the position of light 1 or 2, it may not correctly updated in the graphical report

view” FIXED


R3324: “ When adding a SRC200 the filename construted by default for pocket 1 is not valid” FIXED

R3325: “ Yellow window inside tool manager window is not always filled by the current SCR200 pocket index” FIXED

R3300: “ Complex alignment not properly calculated, small deviation on actual generate big difference on alignment calculation (axis reversed)” FIXED

R2611: “ Sometimes Complex alignment calculation failed. One axis is inverted” FIXED R3283: “ Duplex: An unknown error occurs always when we reach the complex alignment in

program and then it is not able to continue again. We only can do this manually in teach and measure mode. And then continue from next step.” FIXED

R3172: “ In duplex mode, when load big CAD file somtimes communication between both computers is lost” FIXED

R3338: “ Direct management of PH10 controller, when change A&B angle with PH10 handbox, we get error message "Transmission error"” FIXED

R3339: “ When enable debug for driver that used socket, data read are not saved in the same debug files that data written” FIXED

R3306: “ Conversion IGES Cale_escamotable.igs et Support de cintreuse.igs impossible - probleme sur trimmed surface 144, trouble on entity 144 trimmed surface” FIXED

R3333: “ Make a graphic report with Cad elements displayed with their Cad color in shading. If this Cad color is white and the background color of the image is also white, Inca3D reverses the color of elements, they are displayed in black.” FIXED

Modifications & Bug fixes (patch V3001 – 2010-03-18 ):

Extensions:

• SB driver o Ability to deactivate probe

• Graphical view o Highlighting selected action link line in the graphical view

o o

• SCR200 / MCR20 : security plane in front of the SCR 200 can be defined not parallel to CMM axis

Bug fix: R3356: “ Cannot delete the border line of the graphical view in the report.” FIXED R3357: “ If change border of Page header and page footer in report editor, it is not applied in the

report correctly.” FIXED R3342: “ IMTS.iges.iges after translation that seems ok, cannot load the bgf” FIXED


R3352: “ I create a report format on a laptop with display in large font, but output is different on other PC.” FIXED

R3358: “ Do not play sound on mechanical stop with Romer arm” FIXED R3323: “ Cannot set a speed for SRC200 movement (only override)” FIXED R3359: “ MCR20 / SCR200: be able to use Tangent direction for normal of the front plane” FIXED R3360: “ Reports are not previewed/printed as defined:Graphic labels are not at the right location

in the view when make a report with several views. After page #4, the part has been moved and enlarged (compared to the defined position)” FIXED

R3350: “ File « 28nov05 carrier eco 35003828.igs » cannot be converted in V2.5.0.11” FIXED


Extensions:

• New action o Measured distance from 2 measured entities : Point-Line, Point-Plane, Line-Line, Line-

Plane, Plane-Plane • SB CNC driver

o HT400 management o Hole detection available with SB Elektronik driver

• SB Manual counter • Label format editor

o GUI improved o Context popup menu o Toolbar organization o Merge cells improvement

Solved Software – Reports: R3381: “ GD&T position point-point: add the 2D option for calculation” DONE R3386: “ SB CNC: Home position can be taken Z then Y then X or Z the X and Y” DONE R3384: “ Hole detection with SB CNC” DONE R3396: “ Integrate Kreon ToolKit 2.1.0.8” DONE

Bug fix:

R3370: “ Formula field : "90°-25°04" does not work. ” FIXED R3380: “ SD CNC: Sometime first probed point of DCC program is probed very hardly” FIXED R3377: “ Line constructed median line-line : attach point is on the intersection” FIXED R3382: “ Plane constructed median line-line is not calculated properly when lines are parallel”

FIXED R3385: “ No communication timeout error message with SB CNC” FIXED R3390: “ Global modification of actions: measuring path wizard modifications and other

modifications are not performed properly when done at the same time (specially vector creation).” FIXED

R3392: “ If re-open an existing probed point, when press escape the label linkline is not unhighlight.” FIXED

R3395: “ When ending scanning, with kreon scanner, Inca3D is frozen. Ctrl+Del is necessary” FIXED



Extensions:

• Report o Ability to display in the report the Microsoft Windows login name of the user who creates

the operation sequence. The keyword is "creator login name".

Solved Software – Reports: R3410: “ Teach and measure selection: No more dialog displayed asking for the parameters”

DONE R3391: “ Set by default the view orientation in ISO view (to avoid black screen [PH displayed]

when starting a new ops)” DONE

Bug fix:

R3405: “ Graphic view : Regarding available options, sometimes the icon where you select the page type is not corresponding to the associated text (so not corresponding to the page type)” FIXED

R3406: “ Rapport graphique : le fichier CAO n'est toujours pas bien centré dans la vue et parfois des problèmes de zoom SD CNC : Sometime first probed point of DCC program is probed very hardly” “ Graphic report : the CAD file is not always in the center of the view and sometimes the scale is wrong” FIXED

R3408: “ Attach point of cone label must be set to the smallest circle center when the cone is limited and not to the vertex” FIXED

R3399: “ Lors de l'enregistrement d'une action, si une tolérance est vide et que l’on décoche le résultat, Inca3D affiche une erreur en disant "champ non rempli” FIXED

R3411: “ Tools : Sometimes Change probe action are displayed with T1 (tip # of start probe) at the end, but tool is not defined as star probe” FIXED

R3412: “ Anc40 + SP25: After execution of scanned circle, if next action executed is not scanned but probed, SP25 is not switched to trigger mode (still in scan mode)” FIXED

R3388: “ Shape and curve profiles : Deviation must be double to fulfill the norm” FIXED



Extensions:

• Measure calculation o In measure window ability to validate several measures, by selecting them and clicking

“Validate measure”

o

o Add apply on N measure in the global modification, by choosing modification to perform and clicking “Apply N-meas”. In example below change X tolerance on several measurement.

• Renishaw UCC : o INCA3D does not install drive anymore, it works with existing drivers (DLLs) install on

UCC. • • DMIS

o Management of DMIS 5.1 o Export DMO : improvement of measured distance exportation o Management of RMEAS with VECBLD for actions: Circles, Roundslots and Rectangles

Solved Software – Reports: R3403: “ Recalculate several measures in 1 clic” DONE R0657: “ Global modif (tolerances) should be also able to work on several measures” DONE R1617: “ Global modif on several measures (eg.. Tolerances)” DONE R1914: “ We must change the tolerances for all measurements (measure 1 and measure 2....in

once) in a ops with global modifications” DONE R3302: “ Ajouter une option dans le module profil utilisateur pour que certains utilisateurs ne

puissent plus personnaliser les barres d'outils (afficher / cacher boutons et barres


outils). ” ” Add a checkbox in user profil to deactivate « display/hide » ability for icon in toolbar” DONE

R3420: “ Renishaw UCC driver: add possibility to deactivate home position” DONE

Bug fix: R3413: “ Number of sampling zone is not always displayed in GDT action when needed” FIXED R3414: “ Milling with ANC39: When change start line in milling action, milling always start from line

1” FIXED R3417: “ CAD entities creation window : If you press in the num pad the key 7 it closes the

window.” FIXED R3422: “ When execute an operation sequence in manual mode always display confirmation

dialog for rotation (PH9/10, ZAK, RTP20) even if confirmation have been disabled” FIXED R3426: “ Label editor: in condition edition window, « add » button is always greyed if no condition

is already define ” FIXED R3404: “ Change the element limits for lines, cylinders, cones, … the temporary displayed element

is not updated” FIXED R3427: “ DMIS: Management of cylindrical probe importation” FIXED R3428: “ Export to DMO: Manage the DMIS 5.1” FIXED R3429: “ Export to DMO: improvement on the exportation of measured distance” FIXED R3442: “ DMIS: Manage the RMEAS with VECBLD for actions: Circles, Roundslots and

Rectangles” FIXED R3443: “ SB CNC controller: circle radius is less than approach distance and retract distance.

Modification of parameters calculated by Inca3D are not applied to the CMM and it generate collision during execution.” FIXED

R3444: “ SB CNC controller: Sometimes speed define in machine parameters are not apply to the CMM.” FIXED

R3441: “ If we uncalibrate the sphere, when the box "calibration probe" appears, if we click on "Calibrate the probe" button nothing happens.

".” FIXED Missing message "Unable to calibrate a probe because sphere not calibrated R3445: “ SB CNC controller + PH10: Sometimes when click on button start automatic calibration

and CMM is already in rotation point position CMM does not move. User need to move a little from position then click on play” FIXED

R3446: “ Format label editor. Click on Undo button or press Ctrl Z keys can sometime crash the program.” FIXED

R3447: “ If Head rotation confirmation is enabled in action machine parameters force confirmation even confirmation is deactivated until operation sequence is open” FIXED

R3448: “ Cannot convert a Proe file. Error message when start conversion.” FIXED R3435: “ Manual calibration (UCC1) : If there is a calibration tolerance and the probe we are

calibrating is outside the tolerance the message "Probe deviation <0,35>" is displayed. For this message the joystick F1 that should do OK is not working” FIXED



Extensions:

• Ability to create new entities from the CAD file o Sphere – Cylinder – Cone - Line – Plane o

o • • When creating a new measurement ability to copy existing measure result

o It allows to keep existing measurement (ie alignment, an area of the part already measured

o Access in main menu • Editor pop up menu

o Add “calculate” and “Clear measure and probed points” on selected actions

o

• Temperature compensation o New action to GET and SET Temperature for CMM compensation

o


o Selection of part extension coefficient by selection in a list, user value can be saved

• New Handbox HT400N for MORA Metrology

o lock / activate axis

o deactivate probe

o take a gage point

o delete last measuring path element (mainly delete last point)

o not used

o switch MCS to PCS (not available)

o OK

o CANCEL

o NOT USED

• F1 : Toolbar Point Line Plane Execute

• F2 : Toolbar Circle Rectangle Rounslot Ellipse StopExecute

• F3 : Toolbar Sphere Cylinder Cone Torus

• F4 : Toolbar Surface point, Edge Pt, Section Pt

• SHIFT+ F1 : Toolbar Point Line Plane Execute

• SHIFT+ F2 : Toolbar Circle Rectangle Rounslot Ellipse StopExecute • SHIFT+ F3 : Toolbar Sphere Cylinder Cone Torus NOT USED


• SHIFT+ F4 : Toolbar Surface point, Edge Pt, Section Pt

•

Bug fix: R3449: “ When click an edge point to calculate a circle on an inner surface boundary, the point

calculated is not at the right place.” FIXED R3456: “ Customer can not import this vda file 1S0803233_TM06_SITZQUERTRAEGER.vda”

FIXED R3458: “ When generate a report in text file with entities selected in the editor, the header is

exported after the first entity.” FIXED R3450: “ With some Internet browsers, when we download on the Inspect3D website the machine

drivers (DRV files), the "Drv" extension is automatically replaced by "Zip" extension. Probably due to the fact that DRV files are zipped files. So it would be interesting” FIXED

R3451: “ If automatic calculation mode is activated in the plane path wizard and you have probed 3 points, if you change a parameter (like number of points U) the strategy is not switched to "from 3 vertex".” FIXED

R3452: “ After a global modification, actions with question mark stay with question mark” FIXED R3457: “ In Duplex mode, in the tool bar the position of areas "play local" and "play global" can be

inversed. So if user does not care of the text he can start execution in global instead of local.” FIXED

R3365: “ The form deviation of the probed rectangles and roundslot is not displayed the result window. We must read the deviation in the graphic labels or report.” FIXED

R3454: “ I click some surface point and go to "shape deviation view", selected pink point are displayed and the bestfit is done with the circle + the selected point (selected element are not needed is these kind of )” FIXED

R3362: “ After renaming a first action F2 in editor, it may happen that renaming an other action will modify the first one” FIXED

R3459: “ Measured operations : some parameters in the constructed nominals or constructed actuals are sometimes at a wrong position and can even be hidden.

You need to close the operation and re-open it to seel all parameters at the right place.”FIXED R3440: “ « CAD entities creation box » : add the possibility to calculate Cylinders, cones, lines,

spheres from clicked points. Those entities will ne be added as CAD entity but can be send to GUI. Currently you need to send a list of points to « KB points » and”

R3466: “ Add the ability to create a new measure copy of the current loaded measure” FIXED R3469: “ After statistic or an Excel export with several measures loaded, we can crash the ops file

(not possible to reload it in Inca3D).” FIXED R3474: “ If click points in the graphic, not possible to send them to the complex alignment action

(replaced in the list box by 'new probed').” FIXED R3475: “ Probe Changing system + SB controller: We get unexpected probe contact during

change tool sequence” FIXED R3415: “ If I select in the graphic module a list of points in a Cloud, the filling of the list of selected

actions in my entity Circle by points is very slow.” FIXED R1056: “ "Start point" in symmetry calculation should be visible only if "Length type" is "User

length".” FIXED R3472: “ Line calculation sometimes failed in Chebyshev mode” FIXED R3493: “ Cannot create and display parameters window for measured tube” FIXED R3486: “ error in report generation if 'create summary' is checked, inca freezes.. inca can only be finished through taskmanager after a few minutes. ” FIXED R3506: “ When display statistic labels, it can happen when you create a new action that new label

is not added in the graphical view and no result display in the parameter window” FIXED R3513: “ If try to change the height of a row the label editor crashes.” FIXED R3512: “ Global position color regarding tolerance is not properly calculated when all results are

inside the tolerance zone” FIXED R3518: “ During changing tool sequence we get Unexpected probe contact” FIXED R3519: “ If you open the cells border dialog and you do not select a border style then current

active border style is applyed to your selected cells. No border style should be applied.” FIXED

R3514: “ Trend color is not properly calculated (depending on number of decimals displayed).” FIXED

R3515: “ Cannot read IGES file / several set or display several times there are nested subfigure entiities with several transformations” FIXED

R1911: “ Conversion catiaV5 to BGF failed on M5381113120000_ISS_A00.CATPart” FIXED


R3521: “ When create a surface alignment and the reprobing sequence is activated, the insertion cursor stay on the alignment action. It should be on the next action” FIXED

R3533: “ DMIS: exportation to dmo is not working properly (FILNAM is exported with 2 quotes '' instead of one ') since V3.0.0.4” FIXED

Solved Software – Reports:

R3470: “ Display a multiple solution choice when a plane is constructed by points with no vectors

to select the plane orientation direction” DONE R3438: “ Add the possibility to change the Nominal or Actual type of an existing operation. ”

DONE Message informs that previous measures will no more be readable for this operation.

R3467: “ Editor menu: Add "Calculate" & "Clear measure and probed point" on the list of selected action” DONE

R3477: “ Improve management of element constructed with elements referenced from a cloud” DONE

R3478: “ DMIS: Manage FEAT/ARC” DONE R3479: “ DMIS: Manage MEAS with number of points requested = 0” DONE R3482: “ In the LoadCAD Files operation the sortcuts "Ctrl + A" to select at once all lines and "Del"

to delete all selected lines are not working.” DONE R3483: “ Importation of ASCII file of points with reference to an operation sequence” DONE R3495: “ Each Inca3D version should have a direct link to its corresponding VDD on I3D web

site.” DONE R3516: “ New MORA AEH handbox for SB controller HT400N” DONE R3520: “ Select by default projection on nominal plane instead of average plane when no plane is

available” DONE R3525: “ Add the possibility to use a large number of colors for borders and backgrounds. Only 16

colors is not enough.” DONE R3523: “ When create a surface alignment in offline mode and send the point clicked in the

graphic to the machine to simulate the probing, some points are not recieved by the operation sequence.” DONE

R3526: “ Add Chinese language” DONE R3527: “ Add a default glossary for each language” DONE R3532: “ When you select a point on a curve and have the option "auto projection on Cad" to get a

Point on Surface; if the normal vector need to be reversed, it is not done after the projection so the result point can not be reversed.” DONE

R3511: “ When there is a condition in a cell if dblclick on the cell then open condition dialogbox. Possibility to display a special background or special border if thecolor is "global tolerance" When select cells do the same way than MS-Excel” DONE


Bug fix:

R3534: “ When change the Tolerance zone file used in the operation sequence, the graphical labels of the view are not updated directly.” FIXED

R3556: “ If we delete a Section that owns a locked view and try to create a view of an other section sometime Inca3D crashes” FIXED

R3557: “ I display a section view with Tol inf -0.5 and Tol sup 0.0. I do not want to see the red Upper tol curve so I open the graphic "parameters" dialog and in "Section" sheet and I unclick the check "Upper tol curve". The curve that becomes hidden is the LOW” FIXED

R3551: “ Cannot click on surface of 00000QRT219113A000.igs” FIXED R3552: “ Geometrical Part.igs missing surface + clicking impossible” FIXED R3473: “ Straightness of line gives not the same results as line cst by points without vector when

plane "none" is selected” FIXED R3555: “ Cone calculation failed in some case since new mathema32.dll (v60)” FIXED



Bug fix: R3500: “UCC with I++: If you are in scanning mode or changing mode no possible to stop the

machine. Even if you press on stop machine is moving.” FIXED R3503: “UCC with I++ If you have a 6,6mm diameter hole and a 4 mm sphere you can not probe

it with 1mm approach and retract distance (error message)” FIXED R3553: “SB Elektonik controller : RTP20: When turn manually the RTP20 for calibration of

position first time the CMM move to the sphere and not stop at touching. When restart again it's working” FIXED

R3580: “ I3DDriver.log is not attached by HotlineMessenger if INCA3D is writing in it when zip is performed” FIXED

R3585: “Metrocon-S : It can happend that a DCC sequence does not start” FIXED R3590: “ External BlueBlack Handbox + UCC1” DONE activated by configuration file in /machine R3591: “UCC2 : at end of home position sequence Inca3D freeze” FIXED


SB CNCxx: New Firmware V5.3.8

Bug fix:

R3601: “ SB CNCxx: If length of a DCC move is less than "Standstill window" (SB CNC parameter) we never detect end of the DCC move. Means that execution does not continue to next DCC move” FIXED

R3617: “ MMAccept with I++ DME: When change speed in MMAccept, VM32.DLL does not send it to Inca3D I++ Server” FIXED

R3085: “CMMOS Execute edge with relative probing, first time does not works (collission or probe point missing). Restart and it works” FIXED

R3209: “ Zeiss CMMOS: must execute two time the edge points in DCC mode if the machine should probe correctly the edge.” FIXED

R3571: “ Saving GPS take long time on the network” FIXED R3619: “ ANC40+ZAK: With old ZAK version, after set current A&B (with action change probe),

there is some variation with current A&B angle. And next DCC move & DCC probing done by GNC.DLL/VM32.DLL don't include A&B with XYZ (Move(XYZ) instead of Move(XYZAB).” FIXED

R3504: “ When machine probe or scan movement of the machine is strange moving approach to the point than goes back and than probing/scanning even if you say 1mm.” FIXED

R3505: “ Sometimes if you execute ops and between two measured element you have some constructed elements after first measured element you get no probed points found.” FIXED

R3502: “UCC : Second Machine parameter in DCC mode not working. Get error message.” FIXED

R3629: “UCC : Sometimes scanning start to the wrong direction” FIXED R3630: “ ZAK for Milling, if Milling tool length is less than length of calibration tool, offset calculated

is wrong” FIXED R2326: “ Measured circle by scan with UCC + SP25 : not working after scanning the circle points :

"cannot calculate the circle invalid number of points" FIXED R3631: “ Action cloud of point must generate ScanOnCurve when used with I++ DME instead of

ScanInPlane” FIXED R3626: “ Error display operation sequence in editor when group followed by a loop” FIXED

VERSION DESCRIPTION DOCUMENT - Inspect 3D · • Wenzel WPC 2030 (2020, 2010 compatible also) •...

Documents

Transcript of VERSION DESCRIPTION DOCUMENT - Inspect 3D · • Wenzel WPC 2030 (2020, 2010 compatible also) •...