Verizon One r1 - I Ching · 2017. 11. 30. · 03/30/04 Kevin Cornwall r.01 Original Draft 04/16/04...
Transcript of Verizon One r1 - I Ching · 2017. 11. 30. · 03/30/04 Kevin Cornwall r.01 Original Draft 04/16/04...
Verizon One r1.62
Content and Creative Services Group Carlsbad, CA
3/30/05
•
Revision History 03/30/04 Kevin Cornwall r.01 Original Draft 04/16/04 Kevin Cornwall r.05 Initial screen comps added with placeholder graphics).
Sequence has been changed to group similar screens together. 04/27/04 Kevin Cornwall r.06 Specifies which screens have text and images. Background gradient on screens removed. Note: only one text only screen. 05/05/04 Kevin Cornwall r.07 Summary screen for Inactive DSL added. 10/13/04 Kevin Cornwall r.1.0 Comps with new design and new graphics. Added “moved”
user type to welcome screen. Changed instruction for Insert CD (Existing – DSL Active)
10/19/04 Kevin Cornwall r.1.1 Added Enter Location screen, screen 21
10/25/04 Kevin Cornwall r.1.2 New look and feel. New “Not Ready” hourglass icon. Removed “Checking DSL Status” screen
11/08/04 Kevin Cornwall r.1.4 Ordered screens into complete sequential flows.
11/30/04 Kevin Cornwall r.1.5 Incorporated usability feedback. Removed Check DSL
screen.
03/30/05 Kevin Cornwall r.1.6 New Welcome screen. Added Calibrations screens. Added TOS screen. Updated the DSL Notification example screens. Legal changes to text.
Overview The Content in this Power Point documents the Verizon One install screens These comps address 4 flows: 1. New/Moving Customer starts on screen 5
A. DSL Active B. DSL not Active
2. Existing Customer starts on screen 33
A. DSL Active B. DSL not Active
Begin New/Moving Flow
New customers or customers moving to a new residence.
Welcome
Set Calibration
Using the stylus, tap the center of the cross-hair target firmly and accurately. Continue to touch the target as it moves to each location on the screen.
Calibration Done The touch screen has been calibrated.
Tap anywhere on the screen
to continue with Verizon One setup.
Tell Us Who You Are
Get Started (new/moving)
Verizon One Placement
Show back of device.
Position on desk next to monitor with computer on floor
Next screen shows larger view Changed text
on all screen with “Next for larger view: instruction
Verizon One Placement
Show back of device.
Position on desk next to monitor with computer on floor
Connect Phone Cord
Next screen shows larger view
Connect Phone Cord
Change port label to DSL/Phone
Connect Phone Cord
Next screen shows larger view
Connect Phone Cord
Connect Ethernet Cable
Next screen shows larger view
Make phone cord less orange, more yellow.
Change port label to DSL/Phone
Connect Ethernet Cable
Make phone cord less orange, more yellow.
Change port label to DSL/Phone
Connect Ethernet Cable
Next screen shows larger view
Make phone cord less orange, more yellow.
Connect Ethernet Cable
Make phone cord less orange, more yellow.
Enter Location Information Enter Location Information
Please touch the boxes to provide the following information:
Date and time:
Time Zone:
Zip Code:
Select Time Zone
Aa
Aa
Aa
Important Product Information Important Product Information
If you have not already done so, please read the printed pamphlet called Verizon One - Important Product Information included in your Verizon One installation kit. It contains important information about your Verizon One purchase and software updates.
Branch Point DSL Check (new/moving) DSL Ready go to screen 20 No DSL skip to screen 22
Congratulations (new/moving)
Insert CD (new/moving)
DSL Not Detected (new/moving – no DSL)
Status Lights (new/moving – no DSL)
Next screen shows larger view
Status Lights (new/moving – no DSL)
DSL Notification (new/moving – no DSL)
DSL Notification (new/moving – no DSL)
Service Ready Date (new/moving) – No DSL
Call for DSL Status to
Ready to Use (new/moving – no DSL)
Next leads summary screen
End New/Moving Flow
Begin Existing Flow
Existing DSL customers
Welcome
Set Calibration
Using the stylus, tap the center of the cross-hair target firmly and accurately. Continue to touch the target as it moves to each location on the screen.
Calibration Done The touch screen has been calibrated.
Tap anywhere on the screen
to continue with Verizon One setup.
Tell Us Who You Are
Get Started (existing)
Disconnect DSL Line (existing)
Next screen shows larger view
Disconnect DSL Line (existing)
Disconnect Computer (existing)
Next screen shows larger view
Disconnect Computer (existing)
Verizon One Placement
Next screen shows larger view
Verizon One Placement
Connect Phone Cord
Next screen shows larger view
Connect Phone Cord
Connect Phone Cord
Next screen shows larger view
Connect Phone Cord
Connect Ethernet Cable
Next screen shows larger view
Connect Ethernet Cable
Connect Ethernet Cable
Next screen shows larger view
Connect Ethernet Cable
Enter Location Information Enter Location Information
Please touch the boxes to provide the following information:
Date and time:
Time Zone:
Zip Code:
Select Time Zone
Aa
Aa
Aa
Branch Point DSL Check (existing)
DSL Ready go to screen 52 No DSL skip to screen 53
Congratulations (existing)
Insert CD (existing – no DSL)