VERITAS Cluster Server error messages and error codes

Details:10001 Please look for messages in the log file10003 Invalid message for agent10004 No agent pid specified for agent %s10005 Getting id messages from agent %s not started by engine10006 Invalid agent attribute: %s10007 Agent does not exist: %s10008 Warning: Agent %s has faulted %d times since %s10009 Agent %s has faulted %d times in less than %d seconds. Will not attempt to restart.\n\t Correct the problem and use 'haagent -start' to start the agent10010 Stopping all agents10011 System not in running state; cannot start agent %s10012 File %s not found10013 %s not a regular file, or execute permission is not set; cannot start10014 Agent file not specified for resource type %s10015 Cannot start %s; please check file10016 Agent %s for resource type %s successfully started at %s10017 Agent already started10018 Invalid channel10019 No connection (ipmhandle) with agent %s: cannot stop10020 Cannot stop agent %s: Some resources are not in offline state10021 Agent %s not started so cannot be stopped10022 Agent %s stopped10023 Agent %s not sending alive messages since %s10024 Agent %s has not sent startup message since %s; restarting the agent10025 Unable to add '%s' attribute; return: %d err mesg: %s10026 Invalid system name10027 System %s not in STALE_ADMIN_WAIT or ADMIN_WAIT; \n\tunable to force node into LOCAL_BUILD10028 Cluster configuration is writable. Must type \n\t'haconf -dump -makero' or \n\t'hastop -all -force'10040 Cannot find %s; no link analysis for this node10041 Cannot find %s; no load sampling for this node10044 LogSize must be an integer10045 LogSize must be at least %d10046 LogSize must be at most %d10047 CounterInterval must be at least 3 seconds10048 Attribute %s does not exist10050 No username or password in login message10051 System %s does not exist; Unable to force node into LOCAL_BUILD10052 System %s not in cluster; Unable to force node into LOCAL_BUILD10053 User %s does not exist10054 Cannot encrypt password; error 0x%x user %s

10055 User %s has wrong password10056 User %s has logged in10057 User %s has no password10058 UserNames attribute contains no username to check; no logins allowed. Use hauser command to add users10059 Unable to force node into LOCAL_BUILD. Please try again10060 Local build from disk failed with message: %s10061 Config dump to disk failed with message: %s10062 Local build from disk failed with message: \n\tNo such file or directory10063 Local build from disk failed with message: \n\tConfiguration syntax incorrect10064 Local build from disk failed with message: \n\tConfiguration is stale10065 Cannot delete %s error %d10066 Entering RUNNING state10068 VCS engine will exit to prevent any inconsistency. Review names of systems listed in VCS configuration and ensure that they are present and thaT node ids are consistent in the LLT configuration files on all systems in the cluster10069 All systems have configuration files marked STALE. Unable to form cluster10070 All systems have stale configurations10071 last RUNNING node has failed or build from local disk failed. Unable to form a cluster;10072 Cluster waiting for administrative action10073 Building from local configuration10074 hacf does not exist!!!10075 Building from remote system10076 Local node leaving cluster before joining as versions differ.\n\tlocal ver: %d.%d.Current cluster ver: %d.%d10077 Received new cluster membership10078 Local node restarted in Read-Write mode, and it is the only node in the cluster. Node transitioning to ADMIN_WAIT10080 Membership 0x%x, Jeopardy 0x%x10081 Unable to update attribute10082 Invalid argument to enable10083 Enabling LinkMonitoring10084 Cannot enable LinkMonitoring when GABSIM is enabled10085 Invalid argument to disable10086 Disabling LinkMonitoring10088 No event name specified10089 Invalid character in event name10090 Event %s already exists; cannot add it10092 Attempting to modify non-existent event10093 Invalid message for event10094 Event %s added10095 Event deleted10096 Condition %s exists for event %s10097 Condition %s added to event %s\n10098 Action %s exists for event %s

10099 Action %s added to event %s10100 Condition %s deleted10101 Condition %s does not exist for event %s10102 Action %s deleted10103 Action %s does not exist for event %s10104 Event does not exist: %s10105 Event %s triggered by group probe triggering condition %s10106 Event %s triggered by group probe triggering action %s10107 Event %s condition %s not satisfied10108 All conditions satisfied for event %s10109 Performing action %s for event %s10110 Event %s triggered by condition %s10124 GABSIMSERVER host = %s10125 GABSIMSERVER: couldn't open connection to the host: %s10126 Cannot heartbeat; errno %d10127 No group name specified10128 Group name is a reserved word or contains invalid character(s)10129 Attempting to add existing group10130 Group limit of %d reached; cannot add more10131 Attempt to modify non-existent group10132 Invalid message for group %x10133 Group does not exist: %s10134 System does not exist: %s10135 System not part of resource's SystemList %s10136 Group added; populating SystemList and setting Parallel attribute recommended before adding resources10137 Resources exist; cannot delete group10138 Dependencies exist from/to this group; cannot delete group10140 Arc exists from %s to %s10141 Arc from %s to %s would cause loop in the dependency graph10142 Groups restricted to maximum of one dependency10143 Maximum 3-level dependency tree exceeded 10144 Could not link groups %s and %s10146 Could not unlink groups %s and %s10147 Could not rename group10148 Initiating online of Resource %s on System %s10149 Initiating offline of Resource %s on System %s10151 System not part of group's SystemList %s10152 Must specify system on which to online/offline group %s10153 Manual operations are disabled for group %s10154 Group %s is frozen10155 Group %s has agent(s) that failed on system %s10156 Group %s is migrating to or from system %s; on-offlining prohibited during switch or failover10157 Group %s faulted on %s; clear faults first with hares -clear

10158 Group %s autodisabled on system %s;\n\tThis can happen if VCS is not running on the system or group is not probed on the system10159 Group %s autodisabled in cluster;This can happen if\n\t group is not probed on all nodes alive in group's SystemList, or\n\t VCS engine is not running on all nodes alive in group's SystemList10160 System %s is frozen10161 Group %s is not enabled on system %s10162 Group %s has not been fully probed on system %s10163 Group dependency is not met if group %s goes online on system %s10164 Group dependency is violated if group %s goes online on system %s10165 Failover group %s is not completely offline in cluster10166 Initiating manual online of group %s on system %s10167 Initiating manual offline of group %s on system %s10168 No AutoStart resources in group10172 Group %s does not include System %s10173 Cannot modify Parallel attribute after resources have been added to group10174 Use -add or -delete to dynamically modify SystemList10175 System %s not defined: cannot create SystemList10176 System %s not defined: cannot modify SystemList10177 This action will remove %s from group; group must go offline on that system before it can be removed10178 System %s not defined: SystemList not modified10179 Group not offline on system %s; SystemList not modified10180 System %s not defined or group not offline on system; SystemList not modified10181 AutoRestart set to %d for %s group10182 Group %s was manually offlined on system %s10183 Group Retry: no retry of group %s on system %s due to persistent resource fault10184 Group Retry: retrying group %s on system %s (try #%d)10185 Group Retry failed for Group %s on System %s: failure occurred within OnlineRetryInterval10186 Group Retry failed for Group %s on System %s: retries exceeded OnlineRetryLimit10187 Received -nopre online command for group %s on system %s10188 Switch option limited to failover groups; use online/offline for parallel groups10191 Cannot switch; group %s is not active anywhere in the cluster10192 Cannot switch to own system10193 Group %s is stopping on system %s and it will not switch10194 Group %s is stopping on system %s due to failover and it will not switch10195 Agent(s) for group %s failed on system %s10196 Group %s depends on group %s to be on system %s; cannot switch group %s10197 Must specify system to switch to for group %s10199 Group %s is not configured on system %s10200 System %s is not available10205 Group %s is faulted on system %s10206 Group dependencies are not met for group %s on system %s10207 Group dependencies are violated for group %s on system %s

10208 Initiating switch of group %s from system %s to system %s10209 System not part of group's SystemList: %s10212 %s dropped below zero; setting to zero10213 Concurrency Violation; %s increased above 1 for failover group10215 Undefined type %s10216 Conventional dependency of resource type %s to %s would create a loop in the dependency graph10217 Group %s already active. Ignoring Restart10218 Group %s autodisabled. Ignoring Restart10219 Group %s not completely offline on node %s. Ignoring Restart10220 Group %s not enabled on node %s; ignoring Restart10221 VCS not running on node %s; ignoring Restart for group %s10222 Node %s frozen; ignoring Restart for group %s10223 Group %s frozen on %s; ignoring Restart10224 Group %s has probes pending on node %s; ignoring Restart10225 Agent has failed on node %s; ignoring Restart for group %s10226 Group %s migrating to or from node %s; ignoring Restart10227 One or more child group not okay with bringing group %s online on node %s;ignoring Restart10228 One or more parent group not okay with bringing group %s online on node %s; ignoring Restart10229 Persistent resource went online on node %s. Trying to online the resources of group %s that were online prior to the fault on node %s10230 Persistent resource went online on node %s; Trying to online group %s on the node10231 Clearing start attributes for resources of group %s on node %s10232 Clearing Restart attribute for group %s on node %s10233 Clearing Restart attribute for group %s on all nodes10234 AutoRestart attribute is not set, so VCS will not bring group %s online if any fault on persistent resource clears10235 Restart set for group %s. Group will be brought online if fault on persistent resource clears.\n If group brought online anywhere else from autostarlist or manually, then Restart will be reset10236 No resource name specified10237 Resource name is a reserved word or contains invalid character(s)10238 Attempting to add existing resource10239 Resource limit of %d reached; cannot add more10240 Attempt to modify non-existent resource10241 Invalid message for resource %x10244 Populate SystemList before adding resource10245 Resource added\nNameRule and Enabled attributes must be set before agent monitors10246 SystemList of resource's group does not include %s10247 Only agents can modify state values10248 Only agents can modify flags values10249 Child resource does not exist: %s

10250 Resources links may not span groups10251 Link to self is prohibited10252 Arc exists from %s to %s10253 Resources of Operations 'None' and 'OnOnly' may not depend on other resources10255 Could not link %s and %s10257 Cannot unlink type-based dependencies10258 Could not unlink %s and %s10260 Resource does not exist %s10261 Resource not configured to run on system %s10262 System not part of resource's SystemList: %s10263 Cannot clear resource of Operations type 'None'10265 Cannot clear resource while group is going offline10266 Resource not faulted on node %s10267 Resource not faulted or group in process of failing over10269 Agent for resource failed on system %s10270 Resource is not enabled10271 Resources of Operations type 'None' do not support onlining or offlining10272 Resources of Operations type 'OnOnly' do not support offlining10275 Manual operations (ManualOps) on resource's group is disabled10276 Group %s for resource %s is frozen10278 Service group (%s) of resource (%s) has failed or is switching,on/offlining prohibited10280 Group %s for resource %s is not enabled on system %s10281 Group %s for resource %s is autodisabled on system %s10282 Group %s for resource %s is autodisabled in cluster10283 Resource has not been probed on system %s10284 Cannot bring a faulted resource on-line,Clear the faulted resource on system %s10285 Cannot online; resource's group is frozen, waiting for dependency to be satisfied10286 Cannot online; resource's group is not offline elsewhere10287 Online resources depend on resource:'%s'; take them offline first10291 Resource %s, configured under Group %s, does not include System %s10292 Cannot online a resource on node %s, which is going down10293 Faulted persistent resource %s is part of online dependency; Clear the faulted resource10294 Faulted resource %s is part of online dependency;clear the faulted resource10295 Initiating online of Resource %s (Group %s) on System %s10297 Resource %s (Group %s) is online on %s (first probe)10298 Resource %s (Group %s) is online on %s (initiated by VCS)10299 Resource %s (Group %s) is online on %s (not initiated by VCS)10300 Initiating offline of Resource %s (Group %s) on System %s10302 RESOURCE %s (Group %s) is FAULTED (timed out) on sys %s (first probe)10303 RESOURCE %s (Group %s) is FAULTED (timed out) on sys %s10304 Resource %s (Group %s) is offline on %s (First probe)10305 Resource %s (Group %s) is offline on %s (initiated by VCS)10306 Resource %s (Group %s) is offline on %s (previous state=OFFLINE)10307 Resource %s (Group %s) is offline on %s (not initiated by VCS)

10315 Snmp attribute modification error %s10317 Snmp actions disabled10318 Cannot send SNMP trap; IP Address (%s) must be valid10319 No trap message to send for trap %s10320 Invalid trap number %s10322 Node %d changed state from %s to %s10352 hasys:System already exists10353 hasys:System %s not found in LLT configuration file10354 System %s not found in LLT configuration file; LLTNodeId Value from %s will be used10355 Please review names of systems listed in VCS configuration, ensuring that they are present \n\t\t and that node IDs are consistent in the LLT configuration files on \n\t\t all systems in the cluster10357 hasys:System does not exist10359 hasys:Node is currently in cluster.Can't delete it10360 hasys:Cannot delete - system %s is part of SystemList of group %s10363 Exiting; could not mark configuration stale10364 haconf: Cluster already writable10365 Unable to set Read/Write File to 010367 haconf: Dump already in progress10369 haconf: Cluster not writable10371 Unable to set Read/Write File to 110374 haconf:No dumps in progress10389 hasys:Can't modify reserved attributes10391 System '%s' listed in main.cf but absent in LLT config file10393 System %s has node id %d in LLT configuration file on system %s, but node id %d is on system %s10396 hasys:Invalid system name: %s10397 process_system() has unknown message: %x10398 Failed to invoke trigger (no node in RUNNING state): %s %s10399 Failed to create process: %s %s10400 Trigger sent on node %s: %s %s10404 Type name is a reserved word or contains invalid character(s)10405 Invalid minor code %x10406 Invalid character in type name10407 Type already exists10408 Type limit of %d reached; cannot add more10409 Type does not exist: %s10410 Resources exist; Cannot delete 'Resource-Type'10411 Cannot modify Operations attribute after resources of this type have been instantiated10412 Could not start agent for type %s on system %s10413 Attribute name is a reserved word or contains invalid character(s)10415 Cannot add attributes to predefined types10416 Attribute already exists %s (%s)10417 Update error %s

10418 Unknown return value10419 Cann't change defaults for Type: %s10421 Non-static attribute does not exist %s (%s)10422 Cannot modify non-static attribute:'Enabled'10423 Incorrect value or dimension type for attribute: %s10424 Incorrect value type specified: %s10426 Incorrect keylist for %s10428 Incorrect association for %s10431 Incorrect dimension type '%d' specified10436 Static attribute does not exist %s (%s)10437 Cannot delete system-defined or predefined attributes10438 Group %s has been probed on system %s10439 Not initiating auto-start online of group on system %s after probe. Waiting for group %s to probe all nodes alive in SystemList10440 Cannot online group %s on node %s. Restart is set. Group will be brought online if fault on persistent resource clears. If group is brought online anywhere else from autostarlist or manually, Restart will be reset10441 Cannot bring group %s on line on node %s. AutoRestart attribute is not set, so will not try to bring group online if any fault on persistent resource clears10442 Initiating auto-start online of group %s on system %s10446 Group %s is offline on system %s10447 Group %s is online on system %s10448 Group %s is failed over to system %s10449 Group %s autodisabled on node %s until it is probed10451 Cleared autodisabled for Group %s on node %s10455 Operation %s(0x%x) rejected. Sysstate=%s%s,Channel=%s,Flags=0x%x10456 Configuration must be ReadWrite. ('%s(0x%x)',Sysstate=%s,Channel=%s,Flags=0x%x)10457 Node: %d changed name from: %s to: %s10458 Warning: PreOnline 0 for group %s; nopre option is ignored10459 Warning: PreOnlining 0 for node %s; group %s (or one of its resources) may have gone online between a prior online and this nopre online10460 Clearing start attribute for resource %s of group %s on node %s10550 Exiting:Cannot open %s10551 Cannot write to: %s errno: %d10553 Cannot read from file: %s,err: %d10554 '%s' does not exist: %s10555 Incorrect recognition of list descriptor %s10557 Missing value in attribute keylist10559 Missing associated value10561 Modify_nvelem;invalid vtype for %s10562 Value is already global10563 Key %s already in list10564 No value associated with key %s10565 Modify/add attribute is invalid for scalars10566 Entry %s not found in attribute keylist

10567 Specified entry greater than list length10568 Delete valid only for keylists and associations10571 Key %s not found10572 No entry at index %d; (did you start with 0?)10573 Scope (global/local) is incorrect10574 No entry for system %s10575 Attribute %s not defined10576 System-defined attributes may not be modified10577 Could not find value of attribute %s10579 Incorrect value for boolean/state/integer %s10581 Incorrect value for boolean/state/integer in vector or keylist %s at location %d10583 Incorrect boolean/state/integer value for associate array entry: %s10584 Last key not associated with an element10590 Cannot start %s %d10591 Failed while waiting for process to complete %s %d10601 Usage:10602 Argument count limit(%d) exceeded10603 Unknown option: %s10604 Unsuccessful open of service10605 Incorrect system specified10606 Incorrect agent specified10609 Conditional argument %s does not contain an '='10610 Invalid number of arguments10611 Invalid arguments10616 Must be root to run this command10617 Static attributes may not be temporary10618 Invalid arguments for attribute addition10619 'HAD' starting on: %s10620 Waiting for local cluster configuration status10621 Local cluster configuration error10622 Local cluster configuration missing10623 Local cluster configuration invalid10624 Local cluster configuration stale10625 Local cluster configuration valid10626 Too many arguments10627 Expected a system name10628 Incorrect number of arguments10629 Too few args or too many options10632 Unexpected option10633 Invalid arguments10642 Error:10643 Error in file :%s at line:%d10653 Invalid group dependency location specified %s10655 Invalid group dependency state specified %s10662 Incorrect group or attribute %s,%s10664 No values specified

10666 Deleting keys.Values can't be specified10669 Incorrect flag specified10670 Incorrect group specified10677 Must specify destination10691 Must specify system name10693 Incorrect attribute specified10694 Incorrect value specified10696 Incorrect time value specified10699 \n\tSCALAR:10706 Incorrect resource or attribute %s,%s10715 Incorrect syntax10718 Incorrect resource specified10740 Incorrect snmp command %s10746 Incorrect snmp command10753 Node name %s, Node ID: %d10754 Node ID; %d does not exist in cluster configuration10755 Unexpected value returned10761 Node ID expected10772 Too many options10792 Must specify the type name10799 Too few arguments10805 Connection timed out10806 Error while registering resource,group or system10807 %s not system-specific; cannot compare10808 %s system-specific; need a system name10809 Value type not supported10810 Must be an administrator to run this command11001 Unknown major message value=0x%x11005 hacf -status died; transistioning to STALE_ADMIN_WAIT11008 Exiting; cannot lock %s11009 Exiting; another copy of VCS may be running11013 Cannot lock file: %s11014 Cannot write string '%s' to file: %s11020 Exiting:Cannot register with SCM(service ctl manager).err: %d11021 Failed to notify service ctl manager (SCM),status: %d, err: %d11022 VCS engine (had) started11023 Cannot initialize socket11024 System name retrieval failed11025 Could not allocate update_err_msg; out of memory?11026 Could not allocate update_vlistp; out of memory?11030 had not ready to receive this command. Message was: 0x%x11031 GABSIM open failed. Exiting11032 registration failed. Exiting11033 GAB open failed. Exiting11034 registering for cluster membership11035 Waiting for cluster membership

11036 GAB recv failed. Exiting11038 Failed to open had service11039 Failed to make MSG_CLUSTER_STOP_SYS11041 Engine stopping; deleting vlist for %s11042 Deleting vlist for %s11043 halog:Unknown major/minor msg = %x11044 halog:Invalid node %s11053 halog:Error specifying cache_size11055 Unknown process-registration message: %x11062 Warning: group %s does not exist; resources added later will not be registered11064 Warning: type %s does not exist. Resources added later will not be registered11083 Tags A,B,C,D and E are global tags.\n\t Do not try to add or delete these11084 %s is an invalid TAG. Use A,B,C,D or E instead11086 Exiting: Cannot make directory: %s11098 Another hashadow running.. VCS engine is exiting11102 VCS exited gracefully11103 VCS exited.It will restart11104 VCS has faulted %d times since %ld; hashadow will not restart VCS. Correct problem and restart VCS11106 Cannot get lock on file: %s, Errno: %d11107 Restarting VCS with following arguments: %s %s11108 Cannot start had. Error=0x%x11113 Memory allocation failed11124 Force overrides evacuate; choose force, evacuate, or neither11131 Incorrect username11135 Cannot get password; error 0x%x11137 Cannot encrypt password; error 0x%x11140 $BNAME is used to setup a disk for combined use by VERITAS Volume Manager and by VERITAS Cluster Server for disk\ncommunication.11141 Failed to setup disk; exiting $111142 There are currently slices in use on disk $RDISK Destroy existing data and reinitialize disk?11143 Device does not exist11144 Device $DISK contains mounted file systems.11145 Usage: $BNAME [disk_tag] Example: $BNAME c1t0d0 Must be run before disk is placed under VxVM control.11146 WARNING: This utility will destorying all data on $DISK.Have all disk groups and file systems on disk $1 been either unmounted or deported?11147 ${HB_SLICE_SIZE} blocks are available for VxCS disk communication and service group heartbeat regions on device $RAW \n\t This disk can now be configured into a Volume Manager disk group.\n\t Using vxdiskadm, allow it to be configured into the disk group as a replacement disk. Do not select reinitialization of the disk.\n\t After running vxdiskadm, consult the output of prtvtoc to confi rm the exsistence of slice 7. Reinitializing the disk under VxVM will delete slice 7. If this happens, deport the disk group and rerun $BNAME.

11155 ioctl error GAB_IOC_DISK11156 %s: cannot malloc(%u) for msgbuf11157 %s cannot ioctl(IOCTL_LLT_GETPARAM/LP_LOWNODE): %s11158 %s cannot ioctl(IOCTL_LLT_GETPARAM/LP_HIGHNODE): %s11159 %s cannot ioctl(IOCTL_LLT_GETPARAM/LP_MYNODE): %s11160 %s cannot ioctl(IOCTL_LLT_GETPARAM/LP_MYCLUSTER): %s11161 %s cannot ioctl(IOCTL_LLT_GETPARAM/LP_NUMLINK): %s11162 cannot malloc(%u) for IOCTL_LLT_GETNODEINFO11163 cannot ioctl(IOCTL_LLT_GETNODEINFO, %d): %s11165 Error opening /dev/gab_011166 Error opening /dev/llt11167 Error obatining LLT data - exiting11172 Insufficient number of arguments11174 %s: not found11175 %s: internal error11176 Failed to execute command; exitcode: %d11177 Command exited on remote host with exitcode: %d11178 Completed %d runs11180 Cmd Busy: %d11181 Cmd Rejected: %d11182 Server Platform: %s11183 Default: Unknown message %d11186 Too many clients11187 (%s): %d handle not found11198 (%s): %d not found11200 Invalid parameter %s11202 Failed to open file '%s'11203 Failed to write '%s'11206 Invalid message header11207 Failed to set state to %d [%s, h= %d]11209 Unknown message %d from unknown sender %d11210 (%s) remove client [%s, h= %d]11211 In %s state [%s]11212 Failed to create process %s; return: %d11213 Slave started successfully11214 Handle=(%d), (%s) Unknown message %d11216 (%s) set state to %d [%s, handle= %d]11220 (%s) set state to %d [msg %d, handle= %d]11235 %s exiting: cannot register with SCM: %d\n11237 %s is Up11241 Insufficient number of arguments11244 '-handle' option not specified11245 Failed to connect to %s; return: %d11246 %s is Up11247 Invalid message header from %d

11249 Failed to create pipes %d %d %d11250 Failed to redirect handles %d %d %d11251 Failed to create child; Err: %d11252 (%s) Unknown message %d from server11253 Failed to write stdin to pipe; Err: %d11258 Error while reading Stdout pipe: %d11259 #bytes in command output: %d11260 No data on Stdout11261 Error while reading Stderr pipe; Err: %d11263 No data on Stderr11272 Command is running on remote host11273 Function '%s' failed; Err: %d11274 System shutting down on %s, HAD exiting..12021 syntax error - %s '%s' in file %s:%d12022 Failed to get working directory12023 Unsuccessful open of ipm service12026 Types file should have '.%s' extension12027 Cannot mkdir %s12028 Cannot chdir %s12028 Exiting:Cannot chdir %s12030 Can't open lock file.errno = %d12031 Configuration locked12032 Cannot create file: %s12033 Cannot open file: %s12035 Error deleting file: %s12036 Source file should have '.%s' extension12040 Failed to change to working directory12043 Failed to dump the configuration from the live engine12045 Aborting after syntax errors12046 Configuration stale12047 Cannot fork %s12048 Destination file should have a '.%s' extension12051 illegal group dependency clause12054 Cannot open input file: %s12055 Unexpected EOF '%s'12056 parent resource '%s' does not exist %s12057 child resource '%s' does not exist %s12058 unknown type '%s' %s12059 Expecting -keys12060 Cannot find attribute '%s'12061 Scalars attributes cannot have multiple values12062 Cannot find resource '%s'12065 Unknown subcommand '%s'12066 Not enough arguments12076 Cannot find group '%s'12083 Cannot find system %s

12085 expecting haevent -add12086 unknown event '%s'12087 Unknown command '%s'12088 unknown event subcommand '%s'12089 unexpected message 0x%x type=%d from engine12090 0x%x message unknown12092 ipm send failure12093 recvb failure12095 Aborting hacf: errors encountered12097 Duplicate definition for %s at %s:%d12103 Cannot find attribute def for %s.%s12104 expecting a list for %s12105 Cannot open output '%s'12109 ipm sendrecvb failure12111 configuration may contain only one cluster clause12112 configuration may contain only one snmp clause12113 system %s defined more than once12114 group %s defined more than once12115 group %s cannot have more than one group dependency clause12116 group %s has a local attribute without a SystemList12117 system %s not on group %s\'s SystemList12118 'Name' is a reserved word and may not be used to name objects or attributes12119 name required for %s:%d12120 Qualified name not found12121 Value for attribute '%s' not found12122 '%s' is a reserved word and may not be used to name objects or attributes12123 Type '%s' defined more than once12124 '-unlink' not implemented. In file: %s:%d12125 Cannot find 'NameRule' for %s or 'name' for %s12126 Cannot find type '%s' %s12127 Cannot find group '%s' %s12128 Resource %s is %s and must not have children12129 resource '%s' in a cycle12130 group %s does not exist12131 group %s contains group dependency cycles12132 Cannot find group '%s'12133 group %s contains too deep group dependency12134 SystemList for group %s contains non-existent system %s12135 group %s has a AutoStartList without a SystemList12136 system %s in group %s AutoStartList, but not in the SystemList12137 Invalid Resource Type %s in group %s12138 Cannot find type '%s'12139 Resource Type %s occuring more than once in dependency attribute for group %s12140 group %s has SystemZones without a SystemList12141 System %s in group %s SystemZones, but not in the SystemList

12142 attribute %s for %s cannot be specified both local and global12143 attribute %s for %s specified local on %s more than once12144 A type cannot be named '%s'. It is a reserved word %s12145 SystemList does not have a list12146 group %s has a local attribute %s without SystemList12150 duplicate event item name %s %s12151 duplicate event name %s %s12155 Bad include line in file %s:%d

VERITAS Cluster Server error messages and error codes [Part 2].

Details:13001 Output of the completed operation (%s) on resource (%s) \n%s13002 Output of the completed operation (%s) \n%s13003 Output of the timedout operation (%s) on resource (%s) \n%s13004 Output of the timedout operation (%s) \n%s13005 Agent(%s) is exiting due to internal error.13006 Resource(%s) - clean procedure did not complete within the expected time.13007 Resource(%s) - close procedure did not complete within the expected time.13008 Agent rejected the offline command for resource(%s) because the resource is not Enabled.13009 Agent rejected the online command for resource(%s) because the resource is not Enabled.13010 Agent rejected the probe command for resource(%s) because the resource is not Enabled.13011 Resource(%s) - offline procedure did not complete within the expected time.13012 Resource(%s) - online procedure did not complete within the expected time.13013 Resource(%s) - did not become online even after completing online & retrying, if configured so. Administrative intervention may be required.13014 Resource (%s) - open procedure did not complete within the expected time.13015 Resource (%s) - faulted and the attempt to automatically restart it was not effective. Administrative intervention may be required.13016 Resource(%s) faluted by becoming offline unexpectedly on its own & it was cleaned up by the agent successfully.13017 Resource(%s) faulted by becoming offline unexpectedly, on its own.13018 Resource(%s) was successfully cleaned up by the agent after the monitoring program consistently failed to determine the resource status within the expected time.13019 Agent(%s) is exiting because the required arguments were not specified.13020 Agent(%s) is exiting because it was given too many arguments13021 Agent(%s) is exiting because it was given unexpected option(%s)13022 Agent(%s) is exiting because of invalid usage.13023 The agent is restarting the resource(%s), which became offline unexpectedly on its own.

13024 The agent is restarting the resource(%s), for which the monitoring program consistently failed to determine the resource status within the expected time.13026 Resource(%s) - monitor procedure finished successfully after failing to complete within the expected time for (%d) consecutive times.13027 Resource(%s) - monitor procedure did not complete within the expected time.13028 Resource(%s) - the last (%d) invocations of the monitor procedure did not complete within the expected time.13029 Resource(%s) - did not become offline even after completing the clean procedure. Administrative intervention may be required.13037 Monitor script file (%s) not found.13038 Error executing the program(%s) for resource (%s).13039 Program(%s) for resource (%s) was abnormally terminated with the exit code (%x).13042 Agent(%s) is exiting because it encountered error(%d) when opening the lock file(%s)13043 Agent(%s) is exiting because it encountered error(%d) when locking file(%s)13044 Agent(%s) is exiting because it encountered error(%d) when seeking to the beginning of the the lock file(%s)13045 Agent(%s) is exiting because it encountered error(%d) writing to the lock file(%s).13046 Agent(%s) is exiting because of incomplete write (%d) of (%d) to the lock file(%s).13047 Agent(%s) is exiting because it encountered error(%d) when releasing lock on file(%s).13048 Agent(%s) is exiting because it encountered error(%d) when seeking to the beginning of the lock file(%s)13050 Agent(%s) is exiting because it could not lock the file(%s)13051 Agent(%s) is exiting because another agent with process-id(%d) is already running for this type13052 Terminating the hung agent for the type(%s) with process-id(%d)13061 Agent is exiting because it could not load the agent library(%s).13062 Agent is exiting because it could not find VCSAgStartup() in the agent library (%s).192001 FileName is not valid187001 File Name is not valid186001 Unable to create the file186002 Unable to delete the file 186503 Monitor is successful186504 Online is successful186505 Offline is successful186506 Clean is successful188001 Unable to create the file188002 ERROR! FileName is not valid189001 Unable to get the path of the HASTATUS.EXE189503 Execution result of the HASTATUS.EXE command %s190001 Target Resource name is not a valid name190002 Unable to Get the computer Name

190003 Unable to determin the state using Input values190004 Target resource is not Probed190005 Unable to get the HASTATUS.EXE Path %s183001 HostName is not a valid name183002 Exchange Path is not a valid path 183003 Unable to set the Virtual Name 183004 Unable to Start the Exchange Server Services183005 Unable to stop the Exchange Server Services183006 Unable to un-set the Virtual Name183007 Invlid parameters VirtualName183008 Unable to start the communication with the registry183009 Unable to update the registry values183010 Unable to close the communication with the registry183011 Unable to find the 'ComputerName' name from registry183012 Unable to read the 'ComputerName' from the registry183013 Unable to communicate with Windows Service Control Manager183014 Unable to start Microsoft Exchange System Attendant Service183015 Unable to start Microsoft Exchange System Directory Service183016 Unable to start Microsoft Exchange Information Store Service183017 Unable to start Microsoft Exchange Message Transfer Agent Service183018 Unable to start Microsoft Exchange Event Service183019 Unable to start Microsoft Exchange Internet Mail Service183020 Unable to get Windows Name from the Service Display Name for (%s)183021 Unable to Control the Service (%s)183022 Unable to QueryServiceStatus the Service (%s)183023 Unable to stop Microsoft Exchange Event Service183024 Unable to stop Microsoft Exchange Internet Mail Service Connector183025 Unable to stop Microsoft Exchange Message Transfer Agent Service183026 Unable to stop Microsoft Exchange Information Store Service183027 Unable to stop Microsoft Exchange System Directory Service183028 Unable to stop Microsoft Exchange System Attendant Service183029 Starting Microsoft Exchange Message Transfer Agent Service183030 %s: Service Status is SERVICE_RUNNING 183031 %s: Service Status is SERVICE_START_PENDING 183032 %s: Service Status is SERVICE_STOP_PENDING 183033 %s: Service Status is SERVICE_CONTINUE_PENDING 183034 %s: Service Status is Unknown Action is PAUSE PENDING 183035 %s: Service Status is SERVICE_PAUSED 183036 %s: Service Status is SERVICE_STOPPED 183037 Log Buffer: %s183038 Unable to start Microsoft Exchange Directory Synchronization Service183039 Unable to start MS Mail Connector Interchange183040 Unable to stop Microsoft Exchange Directory Synchronization Service183041 Unable to stop MS Mail Connector Interchange183503 In Exchange Monitor Function183504 In Exchange Online Function

183505 Parameters received from Agent Frameworks are Parm#1 (%s), Param#2 (%s) Param#3(%ld)183506 In Exchange Offline Function183507 ISINTEG.EXE path (%s)183508 Result of the ISINTEG Execution %s183509 Starting Microsoft Exchange Message Transfer Agent service183510 Attempting to stop Microsoft Exchange Event183511 Attempting to stop Microsoft Exchange Internet Mail Service183512 Attempting to stop Microsoft Exchange Message Transfer Agent183513 Attempting to stop Microsoft Exchange Information Store183514 Attempting to stop Microsoft Exchange System Directory183515 Attempting to stop Microsoft Exchange System Attendant183516 Attempting to stop Microsoft Exchange Directory Synchronization183517 Attempting to stop MS Mail Connector Interchange184001 IIS Configuration is not Valid 184002 Unable to get the Service Control Manager Handle184003 Unable to get the Service Name from Service Display Name184004 Unable to get the Service Handle for IIS Service184005 Unable to find a usable WinSock DLL184006 Unable to get host name 184007 Unable to get host name from gethostbyname184008 FTP Service is in Unknown State184009 Unable to create a FTP socket %ld 184010 Unable to set the FTP socket options %ld184011 Unable to set the IO mode of the FTP socket %ld 184012 Unable to establish FTP socket connection %ld184013 Unable to determine the status of the FTP socket %ld184014 Unable to read the status of the FTP connection %ld184015 Unable to send the command to the FTP server %ld184016 Unable to get the status of the send command from FTP server %ld184017 Unable to receive a command from FTP server %ld 184018 Connection with the FTP server Timeout184019 Unable to get the data from the FTP server %ld184020 WWW Service is in Unknown State184021 Unable to create a WWW socket %ld 184022 Unable to set the WWW socket options %ld184023 Unable to set the IO mode of the WWW socket %ld 184024 Unable to establish WWW socket connection %ld184025 Unable to determine the status of the WWW socket %ld184026 Unable to create a SMTP socket %ld 184027 Unable to set the SMTP socket options %ld184028 Unable to set the IO mode of the SMTP socket %ld 184029 Unable to establish SMTP socket connection %ld184030 Unable to determine the status of the SMTP socket %ld184031 Unable to create a NNTP socket %ld 184032 Unable to set the NNTP socket options %ld

184033 Unable to set the IO mode of the NNTP socket %ld 184034 Unable to establish NNTP socket connection %ld184035 Unable to determine the status of the NNTP socket %ld184501 In IIS Open Function184502 FTP : wServiceFlag(%ld), wServicePortNumber(%ld), wServiceTimeOut (%ld)184503 WWW : wServiceFlag(%ld), wServicePortNumber(%ld), wServiceTimeOut (%ld)184504 SMTP : wServiceFlag(%ld), wServicePortNumber(%ld), wServiceTimeOut (%ld)184505 NNTP : wServiceFlag(%ld), wServicePortNumber(%ld), wServiceTimeOut (%ld)184506 Monitor Flag : (%ld)184507 In IIS Monitor Function184508 In IIS OnLine Function184509 In IIS OffLine Function184510 In IIS Close Function184510 FTP Service Initialize Function184511 FTP Monitor Function 184512 FTP Service is Offline184513 Calling Detail Monitor Routine for FTP Service184514 FTP Service Socket call success184515 FTP Service Setsockopt call success184516 FTP Service Ioctlsocket call success184517 FTP Service Connect call success184518 FTP Service SocketReadBuffer call success184520 In Detail Monitor function for FTP Server184521 WWW Service Initialize Function184522 WWW Monitor Function 184523 WWW Service is Offline184524 WWW Service is Online184525 Calling Detail Monitor Routine for WWW Service184526 In Detail Monitor function for WWW Server184527 WWW Service Socket call success184528 WWW Service Setsockopt call #1 success184529 WWW Service Setsockopt call #2 success184530 WWW Service Setsockopt call #3 success184531 WWW Service Ioctlsocket call success184532 WWW Service Connect call success184533 WWW Service Detail Monitor success184534 SMTP Service Initialize Function184535 SMTP Monitor Function 184536 Calling Detail Monitor Routine for SMTP Service184537 SMTP Monitor returning success184538 In Detail Monitor function for SMTP Server184539 SMTP Service Socket call success184540 SMTP Service Setsockopt call success

184541 SMTP Service Ioctlsocket call success184542 SMTP Service Connect call success184543 SMTP Service Detail Monitor success184544 NNTP Service Initialize Function184545 NNTP Monitor Function 184546 Calling Detail Monitor Routine for NNTP Service184547 NNTP Monitor returning success184548 In Detail Monitor function for NNTP Server184549 NNTP Service Socket call success184550 NNTP Service Setsockopt call success184551 NNTP Service Ioctlsocket call success184552 NNTP Service Connect call success184553 NNTP Service Detail Monitor success184554 %s : Service Status is SERVICE_RUNNING 184555 %s : Service Status is SERVICE_START_PENDING184556 %s : Service Status is SERVICE_STOP_PENDING184557 %s : Service Status is SERVICE_CONTINUE_PENDING184558 %s : Service Status is SERVICE_PAUSE_PENDING184559 %s : Service Status is SERVICE_PAUSED184560 %s : Service Status is SERVICE_STOPPED177001 Disk Number is not specified or incorrect, cannot online177002 Signature is not specified or incorrect, cannot online177003 Physical drive not found Or Invalid harddisk number configured177004 Read Error on the configured Disk drive177005 Incorrect disk.177500 Actual siganture: %lu177501 Supplied signature (diskno=%ld, signature=%lu)178001 Invalid Mount disk.178002 Drive letter is in use, possibly network drive.178003 Could not perform quick file system check178004 Could not run CHKDSK.EXE to check the file system.178005 Invalid Mount disk Signature (drive=%s, signature=%ld)178006 File system check failed.178007 Could not access the drive.178008 Incorrect File system.178009 Could not assign the drive letter.178010 Drive already assigned.178011 Could not unlock the volume178012 Could not unassign the drive letter.178013 Could not dismount the volume.178014 Forced Unmount - Could not locate OH.EXE to get the list of files opened on the share drive.178015 Forced Unmount - Could not get the list of files opened on the shared drive.178016 Could not lock the volume.178017 Incorrect drive letter assigned.178500 Mount device path. (devicepath=%s)

178501 Cleaning resources.178502 Offline successful.178503 Online successful.178504 File system check successful.178505 Possibly following are the files open on the Shared disk.178506 File is in use by application (File=%s, Type=%s, Application=%s)178507 Mount attributes (Disk signature=%lu, drive=%s, file_system_type=%s, hard_disk#=%d, partition#=%d)178508 Assigning device path. (devicepath=%s)178509 Configured file system (filesystem=%s)178510 Actual file system (filesystem=%s)178511 Mounted drive. (drive=%s)198001 PrinterName not specified for resource %s198002 ShareName not specified for resource %s198003 Max users cannot be 0 -- check value198004 Mount resource not specified for spool directory, %s cannot online198005 Cannot add share %s for device %s error %d parameter %d198006 Cannot delete share %s -- error %d198007 Cannot monitor share %s error %d -- returning unknown198008 For sharename %s, Printer is %s, not %s-- returning offline198009 %s not shared as a type STYPE_PRINTQ but %d -- returning unknown198010 Cannot clean share %s -- error %d198503 In online for resource %s198504 In offline for resource %s198505 In monitor for resource %s returning %d198506 In clean for resource %s181001 PathName not specified for resource %s181002 ShareName not specified for resource %s181003 Max users cannot be 0 -- check value181004 Shared Drive letter is not retrieved from Mount resource, resource %s cannot online181005 Cannot add share %s for device %s error %d parameter %d181006 Cannot delete share %s -- error %d181007 Cannot monitor share %s error %d -- returning unknown181008 For sharename %s, path is %s, not %s-- returning offline181009 %s not shared as a type STYPE_DISKTREE but %d -- returning unknown181010 Cannot clean share %s -- error %d181503 In online for resource %s181504 In offline for resource %s181505 In monitor for resource %s returning %d181506 In clean for resource %s180001 Name must be less than %d characters in length180002 Online -- Cannot convert the virtual name to wide string while adding comment180003 Unable to get the local host name180004 Online-- Unable to set the comment info to local computer180005 Cannot convert the virtual name to wide string

180006 Online -- Cannot add computer name %s180007 Virtual Name must be present180009 Monitor -- Unable to get the virtual computer name info180010 Monitor -- Possibly Virtual name already exists180011 Cannot delete virtual name180503 In online for resource %s180504 In offline for resource %s180505 In monitor for resource %s returning %d180506 In clean for resource %s173001 IP address not specified.173002 SubNetmask not specified.173003 Adapter not specified.173004 VCS internal error, contact support. Error: %d173005 Bad IP address: %s173006 Bad SubNetMask: %s173007 IP address already exists: IP %s173008 VCS internal error, contact support. Error: %d-%d173009 No empty slot left for assigning IP, check the adapter name and free slots: Adapter %s.173010 IP address not specified.173011 SubNetmask not specified.173012 Adapter not specified.173013 VCS internal error, contact support. Error: %d173014 Bad IP address: %s173015 Bad SubNetMask: %s173016 VCS internal error, contact support. Error: %d-%d173017 Can not offline the resource as IP address is Admin IP address.173018 IP address not specified, returning unknown state.173019 SubNetmask not specified, returning unknown state.173020 Adapter not specified, returning unknown state.173021 Bad IP address, returning unknown state, IP: %s173022 Bad SubNetMask, returning unknown state, SubNetMask: %s173023 VCS internal error, contact support. Returning unknown state. Error: %d-%d173024 VCS internal error, contact support. Returning unknown state. Error: %d173025 IP address is Admin IP address, returning unknown state.173026 VCS internal error, contact support. Error: %d173027 VCS internal error, contact support. Error: %d-%d173028 VCS internal error, contact support. Error: %d-%d173501 Index for assigning IP:%s is %d.173502 IP assigned successfully IP: %s.173503 Index for de-assigning IP:%s is %d.173504 IP de-assigned successfully IP: %s.173505 Adapter does not have IP assigned: Adapter - %s IP - %s.173506 Returning offline, Error: %d.173507 Returning offline, adapter does not have IP assigned: Adapter - %s IP - %s.173508 Returning online.

173509 IP address not specified.173510 SubNetmask not specified.173511 Adapter not specified.173512 Bad IP address: %s173513 Bad SubNetMask: %s173514 Adapter does not have IP assigned: Adapter - %s IP - %s.173515 Index for de-assigning IP:%s is %d.173516 Can not de-assign IP as IP address is Admin IP address.173517 IP de-assigned successfully IP: %s.173518 CreateMutex for IP agent opened existing mutex.173519 CreateMutex for IP agent created new mutex.174001 VCS internal error, contact support. Returning unknown state. Error: %d-%d174002 VCS internal error, contact support. Returning unknown state. Error: %d174003 VCS internal error, contact support. Returning offline state. Error: %d174004 Returning offline state, check if the adapter name is valid: %s174005 VCS internal error, contact support. Error: %d-%d174006 Invalid IP address detected. Execute the ipconfig and inform sysadmin. Adapter and IP is: %s %s174007 Invalid SubNetMask detected. Execute the ipconfig and inform sysadmin. Adapter, IP, SubNetMask is: %s %s %s174008 Adapter not specified, returning unknown state174009 Adapter does not have IP assigned. Returning offline state, contact sysadmin. Adapter is :%s174010 Memory allocation error, contact sysadmin. Returning unknown state.174011 Returning offline state, check if the adapter name is valid: %s174012 Adapter not specified174013 VCS internal error, contact support. Error: %d174014 VCS internal error, contact support. Error: %d-%d174015 Memory allocation error, contact sysadmin174016 Adapter not specified174017 VCS internal error, contact support. Error: %d174018 VCS internal error, contact support. Error: %d-%d174019 VCS internal error, contact support. Error: %d-%d174501 Ping successfull for the host: %s174502 Ping unsuccessfull for the host: %s174503 Found data for the resource174504 Getting monitored for first time174505 Total packets sent between 2 intervals: %d174506 Total error packets sent between 2 intervals: %d174507 Error percentage is: %d174508 IP broadcast address is: %s174509 Finding the broadcast address using IP address and Subnetmask as: %s %s174510 IP broadcast address is: %s174511 Using connection status OID174512 Resource is online as status is connected174513 Resource is offline as status is disconnected

174514 Using host list/echo service method174515 Returning online after using ping hostlist174516 Using echo service method174517 Pkt count before & after echo is: %d & %d174518 Resource is found online using UDP echo service174519 CreateMutex for NIC agent opened existing mutex.174520 CreateMutex for NIC agent created new mutex.174521 MAC address is: %s174522 Total number of interfaces for the system are: %d174523 Interface index is: %d174524 Received pkt count is: %d174525 Sent unicast pkt count is: %d174526 Sent non unicast pkt count is: %d174527 Sent error pkt count is: %d174528 Empty slot found174529 Found MAC address for the aapter174530 Crossed the error percentage limit, returning offline174531 Returning offline174532 Lock obtained174533 Lock released174534 Lock obtained174535 Lock released174536 Lock obtained174537 Lock released175001 No adapters specified in the AdapterList.175002 Memory allocation error, contact sysadmin.175003 Bad IP address: %s175004 Bad SubNetMask: %s175005 IP address already exists: IP %s175006 VCS internal error, contact support. Error: %d-%d175007 VCS internal error, contact support. Error: %d175008 No empty slot left for assigning IP address on adapter: %s175009 VCS internal error, contact support. Error: %d %s175010 No adapters specified in the AdapterList.175011 Memory allocation error, contact sysadmin.175012 Bad IP address: %s175013 VCS internal error, contact support. Error: %d-%d175014 VCS internal error, contact support. Error: %d175015 VCS internal error, contact support. Error: %d %s175016 No adapters specified in the AdapterList, returning unknown state.175017 Bad IP address, returning unknown state. IP address is: %s175018 Bad SubNetMask, returning unknown state. SubNetMask is: %s175019 VCS internal error, contact support. Returning unknown state. Error: %d-%d175020 VCS internal error, contact support. Returning unknown state. Error: %d175021 No adapters specified in the AdapterList.175022 Memory allocation error, contact sysadmin.

175023 Bad IP address: %s175024 VCS internal error, contact support. Error: %d-%d175025 VCS internal error, contact support. Error: %d175026 VCS internal error, contact support. Error: %d %s175501 Number of devices are:%d.175502 Device number and name is :%d- %s175503 IP Address: %s175504 SubNetMask: %s175505 IP address and index for assigning it it as :%s %d.175506 IP assigned successfully IP and Adapter name is :%s %s.175507 Found data for the adapter: %s175508 Adapter and MAC address is : %s %s175509 Total number of interfaces on the system are %d175510 Adapter and interface index is : %s %d175511 Admin Status up for the adapter: %s175512 Admin Status down for the adapter: %s175513 Number of devices are:%d.175514 Device number and name is :%d- %s175515 IP Address: %s175516 SubNetMask: %s175517 IP address and index for de-assigning it it as :%s %d.175518 IP de-assigned successfully IP and Adapter name is :%s %s.175519 Found data for the adapter: %s175520 Adapter and MAC address is : %s %s175521 Total number of interfaces on the system are %d175522 Adapter and interface index is : %s %d175523 Admin Status up for the adapter: %s175524 Admin Status down for the adapter: %s175525 Returning online.175526 Number of devices are:%d.175527 Device number and name is :%d- %s175528 IP Address: %s175529 SubNetMask: %s175530 IP address and index for de-assigning it it as :%s %d.175531 IP de-assigned successfully IP and Adapter name is :%s %s.175532 Found data for the adapter: %s175533 Adapter and MAC address is : %s %s175534 Total number of interfaces on the system are %d175535 Adapter and interface index is : %s %d175536 Admin Status up for the adapter: %s175537 Admin Status down for the adapter: %s175538 Returning offline, error: %d175539 Adapter does not have IP assigned: IP and adapter name is: %s - %s.175540 Adapter does not have IP assigned: IP and adapter name is: %s - %s.176001 VCS internal error, contact support. Returning unknown state. Error: %d-%d176002 VCS internal error, contact support. Returning unknown state. Error: %d

176003 VCS internal error, contact support. Error: %d-%d176004 VCS internal error, contact support. Error: %d176005 VCS internal error, contact support. Returning unknown state. Adapter: %s Error: %d-%d176006 VCS internal error, contact support. Returning unknown state. Adapter: %s Error: %d176007 VCS internal error, contact support. Adapter: %s Error: %d176008 VCS internal error, contact support. Adapter: %s Error: %d-%d176009 VCS internal error, contact support. Adapter: %s Error: %d %s176010 Check if a valid is specified in the AdapterList. Adapter Name: %s176011 Invalid Admin IP address. Check the configuration. Admin IP: %s176012 Invalid SubNetMask. Check the configuration. Admin SubNetMask: %s176013 Returning offline, No adapters specified in the AdapterList.176014 Memory allocation error, contact sysadmin. Returning unknown state.176015 Admin IP address not specified, returning unknown state. Check the configuration.176016 Admin SubNetMask not specified, returning unknown state. Check the configuration.176017 Invalid Admin IP address, returning unknown state. Check the configuration. Admin IP: %s176018 Invalid Admin SubNetMask, returning unknown state. Check the configuration. Admin SubNetMask: %s176019 Invalid IP address detected. Execute ipconfig and inform sysadmin. Adapter and IP is : %s %s. 176020 Adapter does not have required empty slots. Adapter name, slots required and actual slots are: %s %d %d176021 No adapters specified in the AdapterList.176022 Admin IP address not specified. Check the configuration.176023 Invalid Admin IP address. Check the configuration. Admin IP: %s176024 Admin SubNetMask not specified. Check the configuration.176025 Invalid Admin SubNetMask. Check the configuration. Admin SubNetMask: %s176026 VCS internal error, contact support. Error: %d176027 VCS internal error, contact support. Error: %d-%d176028 VCS internal error, contact support. Adapter: %s Error: %d-%d176029 VCS internal error, contact support. Adapter: %s Error: %d %s176030 VCS internal error, contact support. Adapter: %s Error: %d176031 All the adapter names specified in the configuration file are invalid.176032 The administrative IP address specified in the configuration file exists on the network. Admin IP: %s176033 Memory allocation error, contact sysadmin176034 Invalid adapter name: %s176035 Admin IP address not specified. Check the configuration.176036 Invalid Admin IP address. Check the configuration. Admin IP: %s176037 Admin SubNetMask not specified. Check the configuration.176038 Invalid Admin SubNetMask. Check the configuration. Admin SubNetMask: %s176039 No adapters specified in the AdapterList.

176040 VCS internal error, contact support. Error: %d176041 VCS internal error, contact support. Error: %d-%d176042 VCS internal error, contact support. Adapter: %s Error: %d-%d176043 Memory allocation error, contact sysadmin176044 VCS internal error, contact support. Adapter: %s Error: %d176045 VCS internal error, contact support. Adapter: %s Error: %d %s176046 VCS internal error, contact support. Error: %d-%d176501 Retuning as adapter not working. Adapter :%s176502 Adapter has crossed error percentage limit. Adapter :%s176503 Returning offline state176504 CreateMutex for MultiNICA agent opened existing mutex.176505 CreateMutex for MultiNICA agent created new mutex.176506 Ping successfull for the host %s176507 Ping un-successfull for the host %s176508 Found matching node176509 Searching matching node176510 Getting monitored for first time176511 Adapter and total pkts sent between 2 intervals: %s %d176512 Adapter and total err pkts sent between 2 intervals: %s %d176513 Adapter and Error percentage: %s %d176514 Adapter and broadcast address is: %s %s176515 IP address and SubNetMask is: %s %s176516 Using connection status OID.176517 Adapter is connected, returning as working. Adapter: %s176518 Adapter is disconnected, returning as not working. Adapter: %s176519 Using host list/echo service method176520 Returning adapter working after using ping hostlist. Adapter: %s176521 Using echo service method176522 Adapter and Pkt count before & after echo is: %s %d %d176523 Returning adapter working after using echo service. Adapter: %s176524 Getting the admin status for adapter: %s176525 Admin status up for adapter: %s176526 Admin status down for adapter: %s176527 Number of devices are: %d176528 Adapter number and name: %d %s176529 pingTimeoutMseconds: %d176530 maxTxErrorPercentage: %d176531 maxTxErrInterval: %d176532 isValidConnectionStatus: %d176533 adminIpAddr: %s176534 adminSubnet: %s176535 hostCount: %d176536 Host number and name: %d %s176537 Active adapter is %s176538 Checking if adapter is working. Adapter: %s176539 Last Valid Adapter is %s

176540 Error limit excceded for adapter, going to select alternate adapter. Adapter: %s176541 Adapter not working. Adapter: %s176542 Currently adapter and total number of IPs assigned are: %s %d176543 Currently adapter and actual number of IPs assigned are: %s %d176544 IP assigned successfully. Adapter and IP is: %s %s176545 Setting the admin IP addr down for adapter %s176546 pingTimeoutMseconds: %d176547 maxTxErrorPercentage: %d176548 maxTxErrInterval: %d176549 isValidConnectionStatus: %d176550 adminIpAddr: %s176551 adminSubnet: %s176552 adapterCount: %d176553 Setting the entry down adapter and index is: %s %d176554 Setting the entry up adapter and index is: %s %d176555 Set the admin status UP successfully for adapter: %s176556 Setting the entry down as admin IP can not be set. Adapter %s176557 Active adapter is %s176558 Adapter number and name: %d %s176559 Checked, Active adapter is %s176560 In close176561 In close completed176562 Lock obtained176563 Lock released176564 Lock obtained176565 Lock released176566 Lock obtained176567 Lock released176568 Empty slot found. Adapter and addr: %s %s176569 Found data for adapter: %s176570 Found data for adapter: %s176571 Found data for adapter: %s176572 Adding empty slot, adapter and count is %s %d176573 Adapter and total ip addresses assigned: %s %d176574 Setting the ip address to 0.0.0.0 adapter and index is: %s %d176575 Adapter and HW address is : %s %s176576 Total number of interfaces for the system are %d.176577 Adapter and Inf index is: %s %d176578 Adapter and Inf index is: %s %d176579 Adapter and Inf index is: %s %d176580 Adapter and Received pkt count is: %s %d176581 Adapter and sent unicast pkt count: %s %d176582 Adapter and sent non unicast pkt count: %s %d176583 Adapter and sent unicast pkt count: %s %d176584 Setting the entry UP, adapter and index is %s %d176585 Setting the entry UP, adapter and index is %s %d

176586 Setting the entry UP, adapter and index is %s %d176587 Setting the entry DOWN , adapter and index is %s %d176588 Setting the entry DOWN , adapter and index is %s %d176589 Setting the entry DOWN , adapter and index is %s %d179001 Cannot get SCM handle179002 Cannot Control Service179003 Invalid Service Name:%s179004 Cannot Open Service handle179005 Cannot Start Service179006 Cannot Stop Service179007 Cannot Close Service Handle179501 Serivce status is Running179502 Serivce status is Stopped179503 Service status is Paused179505 Service status is Start_Pending179506 Service status is Stop_Pending179507 Service status is Paused_Pending179508 Service status is Continue_Pending179509 GenericService Agent Shutdown179510 Argument %d is:%s179511 Return value is: %d185001 Cannot get SCM handle185002 Cannot Control Service.185003 Invalid Service Name:%s185004 Cannot Open Service handle185005 Cannot Start Service185006 Cannot Stop Service185007 Cannot Close Service Handle185008 Detail Monitoring is failed185009 Function QueryStatus Failed185010 Error in notescpp api:%s185501 Domino's status is Running185502 Domino's status is Stopped185503 Domino's status is Paused185504 Domino's status is Start_Pending185505 Domino's status is Stop_Pending185506 Domino's status is Paused_Pending185507 Domino's status is Continue_Pending185508 Initializing C++ API for Detail Monitoring185509 Getting the Database185510 Opening the Database185511 Detail Monitoring is disabled185512 Detail Monitoring is enabled185513 Detail Monitoring is successfull185514 Function QueryStatus is successfull185515 Database File: %s & DominoServer: %s

185516 Return value is: %d185517 LotusDomino Agent Shutdown