VD 2016 - comwerk.it · Maschi a macchina per dadi Round Dies and Hexagon Die Nuts Filiere e...
Transcript of VD 2016 - comwerk.it · Maschi a macchina per dadi Round Dies and Hexagon Die Nuts Filiere e...
05.1
5.6,
0.D
.Pr.
THREADING SOLUTIONS
VÖLKEL GmbHMorsbachtalstraße 18D-42855 Remscheid
Postfach 15 01 28D-42828 Remscheid
Telefon +49 2191 490112Telefax +49 2191 490125
E-Mail: [email protected]: www.voelkel.com VD 2016
VD
201
6
VÖLKEL GmbHMorsbachtalstraße 18 D-42855 Remscheid
Postfach 15 01 28 D-42828 Remscheid
Telefon +49 2191 490112Telefax +49 2191 490125
E-Mail: [email protected]: www.voelkel.com
because available because reliable because you
1915 – 2015VÖLKEL THREADING SOLUTIONS – WORLDWIDE COMPETENCE IN THREAD-CUTTING TOOLS
Based on the experience of 100 years in the production of thread cutting tools
VÖLKEL has developed into a worldwide leading supplier of standard thread
cutting tools, all available from stock.
As a family business we are able to react flexibly and quickly to future
challenges. The families Völkel (Remscheid) and Carrington (Birmingham) are
committed to the long-term and sustainable implementation and the compliance
of these promises.
1915 – 2015VÖLKEL THREADING SOLUTIONS – COMPETENTI A LIVELLO MONDIALE NEGLI UTENSILI PER FILETTARE
Grazie a una esperienza di 100 anni nel campo della filettatura VÖLKEL si
attesa come uno dei leader di mercato nell’offerta di utensili per filettare sempre
disponibili a magazzino.
Siamo una azienda familiare in grado di reagire rapidamente e in modo flessibile
alle sfide che il mercato ci pone. Le famiglie Völkel (Remscheid) e Carrington
(Birmingham) si impegnano per la realizzazione e il mantenimento di progetti
durevoli e a lungo termine.
because reliable
because available
because you
… because you rely on a availability of more than 99% on all catalogue items
more than 7.000 articles available on a daily basisarticle in catalogue with an availability of more than
99 %dispatch of small orders on the same dayspecial dimensions from 1 to 110 mm
… because we keep our promises and you benefi t from a guaranteed constant good quality for the industry
guaranteed constant, good quality for the industryhigh process and service qualitycentral: fi nal control, qualitymanagement, storage,
picking and distribution
… because you are our priority and we offer an attractive package for a successful and profi table cooperation.
…poiché si può contare su una capacità di spedizione immediata di oltre 99% degli articoli a catalogo
oltre 7000 prodotti subito disponibili disponibilità di magazzino di oltre il 99% di tutti gli
articoli a catalogo spedizione in giornata misure piene e mezze da 1 mm a 110 mm
…poiché manteniamo le promesse e potete contare su una qualità e un servizio sempre costante
potete contare su un livello di qualità uniforme a livello industriale
elevata qualità di processo e di servizio Sede centrale: controllo fi nale del prodotto,
sicurezza della qualità, immagazzinamento, ordinativi, distribuzione
…poiché per noi siete il punto centrale e vi offriamo quindi una collaborazione completa ed effi ciente.
QualityQualità
Serviceservizio
Priceprezzo
9
14
44
60
74
129
150
157
161
203
229
13
43
59
73
128
149
156
159
202
228
242
-
-
-
-
-
-
-
-
-
-
-
Die Stocks - Tap Wrenches Porta-utensili
Hand Taps Maschi a mano
Short Machine Taps Maschi macchina corti
HexTap, Bits and Combined Taps HexTap, utensili con attacco esagonale e maschi combinati con punte
Machine Taps Maschi a macchina
Machine Taps with coloured ring Maschi a macchina con collarini colorati
Fluteless (Forming) Taps Maschi a rulare
Machine Nut Taps Maschi a macchina per dadi
Round Dies and Hexagon Die Nuts Filiere e filiere esagonali
Tap & Die Sets Assortimento
Technical Information Informazioni tecniche
M MF BSW BSF BA WDIN 477
UNC UNF UNEF UNUNS
UN-8 UN-12
1635
2037
26 27 28 29 30 31
39 40 41 42 42
46 49 50 50 51 51
6973
73 70 70
63 64
77 92 99 101 103 107 105109
105106
105106
119 122
88
132140142
139141
139141
139141
153
156
158
162182
165183
171 171 172 173 174 175
185 186 189 190 190
192 193 195 195 196 196 197
201
204207210
204207
208217
208 209 209
M MF BSW BSF BA WDIN 477
UNC UNF UNEF UNUNS
UN-8 UN-12
6
INDEX
Hand TapsMaschi a mano
Hand Taps - LHMaschi a mano - LH
Short Machine TapsMaschi macchina corti
Combined TapsMaschi combinati con punte
HexTapHexTap
Machine TapsMaschi a macchina
Machine Taps - LHMaschi a macchina - LH
Machine Taps with oversizeMaschi a macchina - tolleranza maggiorata
Machine Taps with coloured ringMaschi a macchina con collarini colorati
Fluteless TapsMaschi a rulare
Fluteless Taps with oversize - 6GMaschi a rulare – 6G
Machine Nut TapsMaschi a macchina per dadi
Round DiesFiliere
Round Dies - LHFiliere - LH
Hexagon Die NutsFiliere esagonali
Hexagon Die Nuts - LHFiliere esagonali - LH
Tap & Die SetsAssortimento
INDEX
GBSP
RcBSPT
RpBSPP
PG Tr NPT NPTF NPS Rd FG BSC Vg
3238
33 34
43
52 53 54 55 56 58 59
68
110 113 114 115 116 117 118
128
139141
159
176184
177 178 179 179 180 180 181
191
198 199 200
202
204208
209
GBSP
RcBSPT
RpBSPP
PG Tr NPT NPTF NPS Rd FG BSC Vg
7
INDEX
Hand TapsMaschi a mano
Hand Taps - LHMaschi a mano - LH
Short Machine TapsMaschi macchina corti
Combined TapsMaschi combinati con punte
HexTapHexTap
Machine TapsMaschi a macchina
Machine Taps - LHMaschi a macchina - LH
Machine Taps with oversizeMaschi a macchina - tolleranza maggiorata
Machine Taps with coloured ringMaschi a macchina con collarini colorati
Fluteless TapsMaschi a rulare
Fluteless Taps with oversize - 6GMaschi a rulare – 6G
Machine Nut TapsMaschi a macchina per dadi
Round DiesFiliere
Round Dies - LHFiliere - LH
Hexagon Die NutsFiliere esagonali
Hexagon Die Nuts - LHFiliere esagonali - LH
Tap & Die SetsAssortimento
INDEX
8
DIE STOCKS - TAP WRENCHESPORTA-UTENSILI
9
because available because reliable because you
9
10
12 12
11 11 10
13
DIE STOCKS - TAP WRENCHESPORTA-UTENSILI
Zinc die castpressogetto di zinco
Steelesecuzione acciaio
Inchmisura pollice
Tap Holder with RatchetGiramaschi con mandrino
Adjustable Tap WrenchesGiramaschi regolabili
Die StocksPortafiliere
Tap ExtensionsProlunghe per maschi
10
1 M 3-10 1/8-3/8 2.4-5.5 85 0,165 10 100012 M 5-12 7/32-1/2 4.5-8.0 100 0,310 10 10002
10 M 3-10 1/8-3/8 2.4-5.5 250 0,250 10 1001020 M 5-12 7/32-1/2 4.5-8.0 300 0,440 10 10020
10 1009110 10092
13/16" 20.6 x 6.35 13/16 x 1/4 200 0,060 5 155201" 25.4 x 9.5 1" x 3/8 224 0,100 5 155251.5/16" 33.4 x 11.1 1.5/16 x 7/16 270 0,180 5 155331.1/2" 38.1 x 12.7 1.1/2 x 1/2 315 0,320 5 155382" 50.8 x 15.9 2" x 5/8 560 0,900 1 155502.1/4" 57.1 x 17.5 2.1/4 x 11/16 560 0,900 1 155572.1/2" 63.5 x 19.0 2.1/2 x 3/4 630 1,400 1 155633" 76.2 x 22.2 3" x 7/8 900 2,200 1 155763.1/2" 88.9 x 25.4 3.1/2" x 1" 900 3,300 1 155884" 101.6 x 25.4 4" x 1" 1000 3,600 1 15599
Tap Holder with Ratchetfor right- and left-hand-turnall steel qualityGiramaschi con mandrino per uso fisso, destro e sinistroesecuzione acciaio
No. for Taps Square Length Weight Art.-No.mm mm kg
Jaws and Spring for No. 1 und 10Jaws and Spring for No. 2 und 20
Die StocksInch - with 3 screws
Portafiliere misura pollice con 3 vite
Length Weight Art.-No.Ø mm inch/pollice mm kg
€
8,009,50
13,0016,00
1,352,20
€
3,003,104,608,70
13,8013,8021,5048,5060,00
191,00
11
16 x 5 M 1-2.6 BSW 1/16-3/32 160 0,050 5 1500120 x 5 M 3-4 BSW 1/8-5/32 200 0,065 5 1500220 x 7 M 4.5-6 BSW 3/16-1/4 200 0,065 5 1500325 x 9 M 7-9 BSW 5/16 224 0,105 5 1500430 x 11 M 10-11 BSW 3/8-7/16 280 0,190 5 1500538 x 10 Mf 12-15 G 1/4 315 0,340 5 1500638 x 14 M 12-14 BSW 1/2-9/16 315 0,340 5 1500745 x 14 Mf 16-20 G 3/8-1/2 450 0,650 1 1500845 x 18 M 16-20 BSW 5/8-13/16 450 0,650 1 1500955 x 16 Mf 22-26 G 5/8-3/4 560 0,900 1 1501055 x 22 M 22-24 BSW 7/8-1" 560 0,900 1 1501165 x 18 Mf 27-36 G 7/8-1" 630 1,400 1 1501265 x 25 M 27-36 BSW 1.1/8-1.3/8 630 1,400 1 15013
45 x 18 M 16-20 BSW 5/8-13/16 450 0,650 1 15209 55 x 22 M 22-24 BSW 7/8-1" 560 0,900 1 15211 65 x 25 M 27-36 BSW 1.1/8-1.3/8 630 1,400 1 15213 75 x 20 Mf 38-42 G 1.1/8-1.1/4 800 2,250 1 15214 75 x 30 M 38-42 BSW 1.1/2-1.5/8 800 2,100 1 15215 90 x 22 Mf 45-52 G 1.3/8-1.5/8 900 3,200 1 15216 90 x 36 M 45-52 BSW 1.3/4-2" 900 3,000 1 15217105 x 22 Mf 54-63 G 1.3/4-2" 975 3,500 1 15218105 x 36 M 54-63 BSW 2.1/4"-2.1/2" 975 3,500 1 15219120 x 22 Mf 64-71 G 2.1/4-2.3/4 956 3,170 1 15220120 x 36 M 64-71 BSW 2.3/4" 956 3,910 1 15221130 x 25 G 3" 966 3,505 1 15222130 x 36 966 4,025 1 15223140 x 22 976 3,620 1 15224150 x 25 G 3.1/2" 986 3,950 1 15226160 x 25 G 4" 996 4,115 1 15228
Die StocksDIN 225 (DIN EN 22568), Zinc die cast
Portafiliere DIN 225 (DIN EN 22568), pressogetto di zinco
Die StocksDIN 225 (DIN EN 22568), STEEL
Portafiliere DIN 225 (DIN EN 22568), esecuzione acciaio
Ø x mm for round Dies Length Weight Art.-No.DIN 223 (DIN EN 22568) mm kg
Ø x mm for round Dies Length Weight Art.-No.DIN 223 (DIN EN 22568) mm kg
€
2,702,802,803,205,208,108,109,909,90
12,7012,7021,4021,40
€
16,2023,1028,9048,5048,5060,0060,0091,5091,50
237,00237,00329,00329,00413,00470,00645,00
12
0 M 1-8 1/16-1/4 2.0-5.0 130 0,050 5 140001 M 1-10 1/16-3/8 2.0-6.3 176 0,100 5 140101.1/2 M 1-12 1/16-1/2 G 1/8 2.1-8.0 176 0,120 5 140152 M 4-12 5/32-1/2 G 1/8 3.0-9.0 280 0,285 5 140203 M 5-20 7/32-3/4 G 1/8-1/2 4.9-12 380 0,660 1 140304 M 11-27 7/16-1" G 1/4-3/4 5.5-16 500 1,500 1 140405 M 13-32 1/2-1.1/4 G 1/4-1" 7-20 700 1,800 1 140506 M 18-42 3/4-1.1/2 G 1/2-1.1/4 11-24 1000 2,600 1 140607 M 27-52 1.1/8-2" G 3/4-1.3/4 16-32 1250 4,500 1 140708 M 27-64 1.1/8"-3" G 3/4-3" 16-40 1250 4,500 1 14080
0 M 1-8 1/16-1/4 2.0-5.0 130 0,050 5 130001 M 1-10 1/16-3/8 G 1/8 2.0-6.3 176 0,095 5 130101.1/2 M 1-12 1/16-1/2 G 1/8 2.1-8.0 176 0,120 5 130152 M 4-12 5/32-1/2 G 1/8 3.0-9.0 280 0,285 5 130203 M 5-20 7/32-3/4 G 1/8-1/2 4.9-12 380 0,660 1 130304 M 11-27 7/16-1" G 1/4-3/4 5.5-16 505 1,500 1 130405 L M 13-32 1/2 -1.1/4 G 1/4-1" 7-20 700 1,800 1 13050
Adjustable Tap WrenchesDIN 1814 Zinc die cast
Giramaschi regolabili DIN 1814, lega leggera
Adjustable Tap WrenchesDIN 1814, STEEL
Giramaschi regolabili DIN 1814, esecuzione acciaio
No. for Taps Square Length Weight Art.-No.mm mm kg
No. for Taps Square Length Weight Art.-No.mm mm kg
€
5,005,705,70
10,1016,0030,0047,0055,0090,00
230,00
€
3,403,703,706,00
11,3020,8032,00
13
2.1 60 M 1-2.6 145212.4 70 145242.7 80 M 3 145273.0 90 M 3.5 145303.4 95 M 4 145343.8 100 145384.3 105 145434.9 110 M 4.5-8 145495.5 115 M 9-10 145556.2 120 M 11 145627.0 125 M 12 14570 8.0 125 145809.0 130 M 14-16 14590
10.0 140 1461011.0 150 M 18 1461112.0 155 M 20 1461213.0 165 1461314.5 175 M 22-24 1461416.0 180 M 27 1461618.0 200 M 30 1461820.0 220 M 33 1462022.0 220 M 36 1462224.0 235 M 39-42 1462426.0 250 1462629.0 265 M 45-48 1462932.0 285 M 52 14632
Tap ExtensionsDIN 377, Squares according to DIN 10
Prolunghe per maschiDIN 377, Quadro in base a DIN 10
Square L1 for DIN 352 Art.-No.mm
€
2,802,802,802,802,803,404,003,203,603,904,806,006,608,70
10,5013,7015,5019,0020,0023,5030,0042,0054,0070,0082,00
115,00
14
HAND TAPSMASCHI A MANO
Nr. 1 Rougher, 6-8 Threads LeadSgrossatore, Imbocco a 6-8 spire
Nr. 2Intermediate, 4-5 Threads LeadIntermedio, Imbocco a 4-5 spire
Nr. 3Finisher, 2-3 Threads LeadFinitore, Imbocco a 2-3 spire
Nr. 1 - Form AFinisher, 6-8 Threads LeadFinitore, Imbocco a 6-8 spire
Nr. 2 - Form DFinisher, 4-5 Threads LeadFinitore, Imbocco a 4-5 spire
Nr. 3 - Form C Finisher, 2-3 Threads LeadFinitore, Imbocco a 2-3 spire
NON-SERIAL FORMVERSIONE CONICA
15
because available because reliable because you
15
HSS-G HSS-E
M 16 35 39
Mf 20 37 40
BSW 26 41
BSF 27
BA 28
UNC 29 42
UNF 30 42
UNEF 31
G (BSP) 32 38 43
PG 33
Tr 34
HAND TAPSMASCHI A MANO
HSS-GLeft Hand/Sinistra
Application HSS-G:- for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through and blind holes- for thread cutting by hand
Applicazione HSS-G:- e per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati
Application HSS-E:- high cutting ability- abrasive material- steels up to 1200 N/mm²- and general use
Applicazione HSS-E:- elevata durata- Materiali di difficile truciolabilità- Acciaio R fino a 1.200 N/mm²- E per uso universale
16
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
M
M3 = 27326M3, No. 1 = 27326-1M3, No. 2 = 27326-2M3, No. 3 = 27326-3
M 1 x 0.25 32 5.5 2.5 2.1 27302M 1.1 x 0.25 32 5.5 2.5 2.1 27304M 1.2 x 0.25 32 5.5 2.5 2.1 27306M 1.4 x 0.3 32 7.0 2.5 2.1 27308M 1.6 x 0.35 32 8.0 2.5 2.1 27310M 1.7 x 0.35 32 8.0 2.5 2.1 27312M 1.8 x 0.35 32 8.0 2.5 2.1 27314M 2 x 0.4 36 8.0 2.8 2.1 27316M 2.2 x 0.45 36 9.0 2.8 2.1 27318M 2.3 x 0.4 36 9.0 2.8 2.1 27320M 2.5 x 0.45 40 9.0 2.8 2.1 27322M 2.6 x 0.45 40 9.0 2.8 2.1 27324M 3 x 0.5 40 11.0 3.5 2.7 27326M 3.5 x 0.6 45 13.0 4.0 3.0 27328M 4 x 0.7 45 13.0 4.5 3.4 27330M 4.5 x 0.75 50 16.0 6.0 4.9 27332M 5 x 0.8 50 16.0 6.0 4.9 27334M 5.5 x 0.9 50 18.0 6.0 4.9 27336M 6 x 1.0 50 19.0 6.0 4.9 27338M 7 x 1.0 50 19.0 6.0 4.9 27340M 8 x 1.25 56 22.0 6.0 4.9 27342M 9 x 1.25 63 22.0 7.0 5.5 27344M 10 x 1.5 70 24.0 7.0 5.5 27346M 11 x 1.5 70 24.0 8.0 6.2 27348M 12 x 1.75 75 29.0 9.0 7.0 27350M 14 x 2.0 80 30.0 11.0 9.0 27354M 15 x 2.0 80 32.0 12.0 9.0 27356M 16 x 2.0 80 32.0 12.0 9.0 27358M 18 x 2.5 95 40.0 14.0 11.0 27362M 20 x 2.5 95 40.0 16.0 12.0 27366M 22 x 2.5 100 40.0 18.0 14.5 27370M 24 x 3.0 110 50.0 18.0 14.5 27374M 27 x 3.0 110 50.0 20.0 16.0 27376M 30 x 3.5 125 56.0 22.0 18.0 27378M 33 x 3.5 125 56.0 25.0 20.0 27380M 36 x 4.0 150 63.0 28.0 22.0 27382M 39 x 4.0 150 63.0 32.0 24.0 27384M 42 x 4.5 150 63.0 32.0 24.0 27386M 45 x 4.5 160 70.0 36.0 29.0 27388M 48 x 5.0 180 75.0 36.0 29.0 27390M 52 x 5.0 180 75.0 40.0 32.0 27392M 56 x 5.5 200 85.0 45.0 35.0 27394M 60 x 5.5 200 85.0 45.0 35.0 27396M 64 x 6.0 220 90.0 50.0 39.0 27398M 68 x 6.0 220 90.0 50.0 39.0 27399
Hand Tapsmetric ISO-thread DIN 13
Maschi a manofilettatura metrica ISO DIN 13
DIN 352 HSS-G Tol. ISO2/6H
How to order/esempio come ordinare:
Nominal Diameter L 1 L 2 D 2 Art.-No.D € €
10,20 30,6010,20 30,6010,20 30,6010,20 30,6010,20 30,6010,20 30,6010,20 30,604,20 12,604,20 12,604,20 12,604,20 12,604,20 12,602,30 6,903,40 10,202,30 6,903,40 10,202,50 7,504,10 12,302,50 7,504,10 12,302,95 8,855,20 15,604,05 12,156,60 19,805,30 15,906,00 18,007,10 21,307,50 22,509,60 28,80
11,00 33,0014,00 42,0016,00 48,0026,50 79,5034,00 102,0046,00 138,0055,00 165,0072,00 216,0081,00 243,0098,00 294,00
139,00 417,00139,00 417,00172,00 516,00216,00 648,00250,00 750,00295,00 885,00
17
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
M
M3 = 27326M3, No. 1 = 27326-1M3, No. 2 = 27326-2M3, No. 3 = 27326-3
M 72 x 6.0 240 80.0 50.0 39.0 28130M 76 x 6.0 240 80.0 50.0 39.0 28131M 80 x 6.0 260 85.0 50.0 39.0 28132M 84 x 6.0 260 85.0 50.0 39.0 28133M 88 x 6.0 260 85.0 50.0 39.0 28134M 90 x 6.0 260 85.0 50.0 39.0 28135M 92 x 6.0 280 90.0 56.0 44.0 28136M 96 x 6.0 280 90.0 56.0 44.0 28137M 100 x 6.0 280 90.0 56.0 44.0 28138
Hand Tapsmetric ISO-thread DIN 13
Maschi a manofilettatura metrica ISO DIN 13
DIN 352 HSS-G Tol. ISO2/6H
How to order/esempio come ordinare:
Nominal Diameter L 1 L 2 D 2 Art.-No.D € €
575,00 1.725,00710,00 2.130,00780,00 2.340,00880,00 2.640,00
1.190,00 3.570,001.275,00 3.825,001.365,00 4.095,001.540,00 4.620,001.735,00 5.205,00
18
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
M
M3 = 27626M3, No. 1 = 27626-1M3, No. 2 = 27626-2M3, No. 3 = 27626-3
M 2 x 0.4 36 8 2.8 2.1 27616M 2.5 x 0.45 40 9 2.8 2.1 27622M 3 x 0.5 40 11 3.5 2.7 27626M 4 x 0.7 45 13 4.5 3.4 27630M 5 x 0.8 50 16 6.0 4.9 27634M 6 x 1.0 50 19 6.0 4.9 27638M 8 x 1.25 56 22 6.0 4.9 27642M 9 x 1.25 63 22 7.0 5.5 27644M 10 x 1.5 70 24 7.0 5.5 27646M 11 x 1.5 70 24 8.0 6.2 27648M 12 x 1.75 75 29 9.0 7.0 27650M 13 x 1.75 75 29 9.0 7.0 27652M 14 x 2.0 80 30 11.0 9.0 27654M 16 x 2.0 80 32 12.0 9.0 27658M 18 x 2.5 95 40 14.0 11.0 27662M 19 x 2.5 95 40 14.0 11.0 27664M 20 x 2.5 95 40 16.0 12.0 27666M 22 x 2.5 100 40 18.0 14.5 27670M 24 x 3.0 110 50 18.0 14.5 27674M 27 x 3.0 110 50 20.0 16.0 27676M 30 x 3.5 125 56 22.0 18.0 27678M 33 x 3.5 125 56 25.0 20.0 27680M 36 x 4.0 150 63 28.0 22.0 27682M 39 x 4.0 150 63 32.0 24.0 27684M 42 x 4.5 150 63 32.0 24.0 27686
M 3 x 0.6 40 11 3.5 2.7 27627M 4 x 0.75 45 13 4.5 3.4 27631M 5 x 0.9 50 16 6.0 4.9 27635
Hand Taps, non-serial formmetric ISO-thread DIN 13
Maschi a mano, versione conicafilettatura metrica ISO DIN 13
DIN 352 HSS-G Tol. ISO2/6H
How to order/esempio come ordinare:
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through and blind holes- for thread cutting by hand
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- Fori passanti e ciechi- Uso manuale
Nominal Diameter L 1 L 2 D 2 Art.-No.D € €
4,20 12,604,20 12,602,30 6,902,30 6,902,50 7,502,50 7,502,95 8,855,20 15,604,05 12,156,60 19,805,30 15,907,50 22,506,00 18,007,50 22,509,60 28,80
14,00 42,0011,00 33,0014,00 42,0016,00 48,0026,50 79,5034,00 102,0046,00 138,0055,00 165,0072,00 216,0081,00 243,00
4,40 13,20 4,40 13,20 4,40 13,20
19
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
M
M3 = 80426M3, No. 1 = 80426-1M3, No. 2 = 80426-2M3, No. 3 = 80426-3
M 3 x 0.5 48 11 3.15 2.5 80426M 4 x 0.7 53 13 4.0 3.15 80430M 5 x 0.8 58 16 5.0 4.0 80434M 6 x 1.0 66 19 6.3 5.0 80438M 8 x 1.25 72 22 8.0 6.3 80442M 10 x 1.5 80 24 10.0 8.0 80446M 12 x 1.75 89 29 9.0 7.1 80450M 14 x 2.0 95 30 11.2 9.0 80454M 16 x 2.0 102 32 12.5 10.0 80458M 18 x 2.5 110 37 14.0 11.2 80462M 20 x 2.5 112 37 14.0 11.2 80466M 22 x 2.5 118 38 16.0 12.5 80470M 24 x 3.0 130 45 18.0 14.0 80474
Hand Taps, non-serial formmetric ISO-thread DIN 13
Maschi a mano, versione conicafilettatura metrica ISO DIN 13
ISO 529 HSS-G Tol. ISO2/6H
How to order/esempio come ordinare:
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through and blind holes- for thread cutting by hand
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- Fori passanti e ciechi- Uso manuale
Nominal Diameter L 1 L 2 D 2 Art.-No.D € €
2,65 7,952,65 7,952,75 8,252,90 8,703,85 11,555,30 15,906,60 19,807,30 21,909,50 28,50
13,20 39,6014,80 44,4017,00 51,0019,50 58,50
20
Mf
M3 x 0.35 = 26308M3 x 0.35, No. 1 = 26308-1M3 x 0.35, No. 2 = 26308-2
M 2.5 x 0.35 40 9 2.8 2.1 26304M 2.6 x 0.35 40 9 2.8 2.1 26305M 3 x 0.35 40 9 3.5 2.7 26308M 3.5 x 0.35 45 10 4.0 3.0 26309M 4 x 0.35 45 10 4.5 3.4 26310M 4 x 0.5 45 10 4.5 3.4 26312M 4.5 x 0.5 50 12 6.0 4.9 26313M 5 x 0.5 50 12 6.0 4.9 26314M 5 x 0.75 50 12 6.0 4.9 26316M 5.5 x 0.5 50 12 6.0 4.9 26315M 6 x 0.5 50 14 6.0 4.9 26317M 6 x 0.75 50 14 6.0 4.9 26318M 7 x 0.5 50 14 6.0 4.9 26319M 7 x 0.75 50 14 6.0 4.9 26320M 8 x 0.5 50 19 6.0 4.9 26322M 8 x 0.75 50 19 6.0 4.9 26324M 8 x 1.0 56 22 6.0 4.9 26326M 9 x 0.5 56 19 7.0 5.5 26327M 9 x 0.75 56 19 7.0 5.5 26328M 9 x 1.0 63 20 7.0 5.5 26330M 10 x 0.5 63 20 7.0 5.5 26331M 10 x 0.75 63 20 7.0 5.5 26332M 10 x 1.0 63 20 7.0 5.5 26336M 10 x 1.25 70 24 7.0 5.5 26338M 11 x 0.75 63 20 8.0 6.2 26339M 11 x 1.0 63 20 8.0 6.2 26340M 11 x 1.25 63 22 8.0 6.2 26342M 12 x 0.5 70 22 9.0 7.0 26345M 12 x 0.75 70 22 9.0 7.0 26343M 12 x 1.0 70 22 9.0 7.0 26344M 12 x 1.25 70 22 9.0 7.0 26346M 12 x 1.5 70 22 9.0 7.0 26348M 13 x 0.5 70 22 11.0 9.0 26347M 13 x 0.75 70 22 11.0 9.0 26349M 13 x 1.0 70 22 11.0 9.0 26350M 13 x 1.5 70 22 11.0 9.0 26351M 14 x 0.5 70 22 11.0 9.0 26355
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
Hand Tapsmetric-fine ISO-thread DIN 13
Maschi a manofilettatura metrica fine ISO DIN 13
DIN 2181 HSS-G Tol. ISO2/6H
Nominal Diameter L 1 L 2 D 2 Art.-No.D
How to order/esempio come ordinare:
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through and blind holes- for thread cutting by hand
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- Fori passanti e ciechi- Uso manuale
€ €6,40 12,806,40 12,806,40 12,806,40 12,806,40 12,806,40 12,806,40 12,806,40 12,806,40 12,806,40 12,806,40 12,805,70 11,405,70 11,405,70 11,405,70 11,405,70 11,405,70 11,406,40 12,806,40 12,806,40 12,806,40 12,806,40 12,805,70 11,406,40 12,808,30 16,608,30 16,608,30 16,608,30 16,608,30 16,608,30 16,608,30 16,607,50 15,00
12,70 25,4012,70 25,4012,70 25,4012,70 25,4012,70 25,40
21
Mf
M 14 x 0.75 70 22 11.0 9.0 26352M 14 x 1.0 70 22 11.0 9.0 26353M 14 x 1.25 70 22 11.0 9.0 26354M 14 x 1.5 70 22 11.0 9.0 26356M 15 x 0.75 70 22 12.0 9.0 26357M 15 x 1.0 70 22 12.0 9.0 26358M 15 x 1.5 70 22 12.0 9.0 26360M 16 x 0.5 70 22 12.0 9.0 26361M 16 x 0.75 70 22 12.0 9.0 26363M 16 x 1.0 70 22 12.0 9.0 26362M 16 x 1.25 70 22 12.0 9.0 26364M 16 x 1.5 70 22 12.0 9.0 26366M 17 x 1.0 70 22 12.0 9.0 26368M 17 x 1.5 70 22 12.0 9.0 26369M 18 x 0.5 80 22 14.0 11.0 26367M 18 x 0.75 80 22 14.0 11.0 26373M 18 x 1.0 80 22 14.0 11.0 26370M 18 x 1.25 80 22 14.0 11.0 26371M 18 x 1.5 80 22 14.0 11.0 26372M 18 x 2.0 80 22 14.0 11.0 26374M 19 x 1.0 80 22 14.0 11.0 26375M 19 x 1.5 80 22 14.0 11.0 26376M 20 x 0.5 80 22 16.0 12.0 26377M 20 x 0.75 80 22 16.0 12.0 26379M 20 x 1.0 80 22 16.0 12.0 26378M 20 x 1.25 80 22 16.0 12.0 26380M 20 x 1.5 80 22 16.0 12.0 26384M 20 x 2.0 80 22 16.0 12.0 26386M 21 x 1.0 80 22 16.0 12.0 26387M 21 x 1.5 80 22 16.0 12.0 26388M 22 x 0.5 80 22 18.0 14.5 26389M 22 x 0.75 80 22 18.0 14.5 26391M 22 x 1.0 80 22 18.0 14.5 26390M 22 x 1.25 80 22 18.0 14.5 26392M 22 x 1.5 80 22 18.0 14.5 26394M 22 x 2.0 80 22 18.0 14.5 26396M 23 x 1.0 80 22 18.0 14.5 26397M 23 x 1.5 80 22 18.0 14.5 26398M 24 x 0.5 90 22 18.0 14.5 26501M 24 x 0.75 90 22 18.0 14.5 26503M 24 x 1.0 90 22 18.0 14.5 26500M 24 x 1.25 90 22 18.0 14.5 26502M 24 x 1.5 90 22 18.0 14.5 26504M 24 x 2.0 90 22 18.0 14.5 26506M 25 x 1.0 90 22 18.0 14.5 26507M 25 x 1.5 90 22 18.0 14.5 26508M 26 x 1.0 90 22 18.0 14.5 26510M 26 x 1.5 90 22 18.0 14.5 26512M 26 x 2.0 90 22 18.0 14.5 26514M 27 x 1.0 90 22 20.0 16.0 26516
Hand Tapsmetric-fine ISO-thread DIN 13
Maschi a manofilettatura metrica fine ISO DIN 13
DIN 2181 HSS-G Tol. ISO2/6H
Nominal Diameter L 1 L 2 D 2 Art.-No.D € €
12,70 25,4012,70 25,40
9,50 19,008,20 16,40
14,00 28,0014,00 28,0014,00 28,0014,00 28,0014,00 28,0014,00 28,0014,00 28,0010,00 20,0015,30 30,6015,30 30,6015,30 30,6015,30 30,6015,30 30,6015,30 30,6011,50 23,0015,30 30,6019,20 38,4019,20 38,4019,20 38,4019,20 38,4019,20 38,4019,20 38,4014,00 28,0019,20 38,4019,90 39,8019,90 39,8019,90 39,8019,90 39,8019,90 39,8019,90 39,8019,90 39,8019,90 39,8026,70 53,4026,70 53,4026,70 53,4026,70 53,4026,70 53,4026,70 53,4020,00 40,0026,70 53,4039,00 78,0039,00 78,0039,00 78,0039,00 78,0039,00 78,0039,00 78,00
22
Mf
M 27 x 1.5 90 22 20.0 16.0 26517M 27 x 2.0 90 22 20.0 16.0 26518M 28 x 1.0 90 22 20.0 16.0 26520M 28 x 1.5 90 22 20.0 16.0 26522M 28 x 2.0 90 22 20.0 16.0 26524M 29 x 1.5 90 22 22.0 18.0 26526M 30 x 1.0 90 22 22.0 18.0 26528M 30 x 1.5 90 22 22.0 18.0 26530M 30 x 2.0 90 22 22.0 18.0 26532M 30 x 2.5 125 56 22.0 18.0 26533M 30 x 3.0 125 56 22.0 18.0 26534M 32 x 1.0 90 22 22.0 18.0 26539M 32 x 1.5 90 22 22.0 18.0 26536M 32 x 2.0 90 22 22.0 18.0 26535M 32 x 3.0 125 56 22.0 18.0 26537M 33 x 1.5 100 25 25.0 20.0 26538M 33 x 2.0 100 25 25.0 20.0 26540M 33 x 3.0 125 56 25.0 20.0 26542M 34 x 1.0 100 25 28.0 22.0 26543M 34 x 1.5 100 25 28.0 22.0 26544M 34 x 2.0 125 40 28.0 22.0 26546M 35 x 1.0 100 25 28.0 22.0 26547M 35 x 1.5 100 25 28.0 22.0 26548M 35 x 2.0 125 40 28.0 22.0 26549M 36 x 1.0 100 25 28.0 22.0 26551M 36 x 1.5 100 25 28.0 22.0 26550M 36 x 2.0 125 40 28.0 22.0 26552M 36 x 3.0 125 40 28.0 22.0 26554M 37 x 1.5 100 25 28.0 22.0 26553M 38 x 1.0 100 25 28.0 22.0 26555M 38 x 1.5 100 25 28.0 22.0 26556M 38 x 2.0 125 40 28.0 22.0 26557M 38 x 3.0 125 40 28.0 22.0 26559M 39 x 1.5 110 25 32.0 24.0 26558M 39 x 2.0 125 40 32.0 24.0 26560M 39 x 3.0 125 40 32.0 24.0 26562M 40 x 1.0 110 25 32.0 24.0 26563M 40 x 1.5 110 25 32.0 24.0 26564M 40 x 2.0 125 40 32.0 24.0 26566M 40 x 3.0 125 40 32.0 24.0 26568M 42 x 1.0 110 25 32.0 24.0 26569M 42 x 1.5 110 25 32.0 24.0 26570M 42 x 2.0 125 40 32.0 24.0 26572M 42 x 3.0 125 40 32.0 24.0 26574M 44 x 1.5 110 25 36.0 29.0 26571M 44 x 2.0 125 40 36.0 29.0 26573M 45 x 1.0 110 25 36.0 29.0 26575M 45 x 1.5 110 25 36.0 29.0 26576M 45 x 2.0 125 40 36.0 29.0 26578M 45 x 3.0 125 40 36.0 29.0 26580
Hand Tapsmetric-fine ISO-thread DIN 13
Maschi a manofilettatura metrica fine ISO DIN 13
DIN 2181 HSS-G Tol. ISO2/6H
Nominal Diameter L 1 L 2 D 2 Art.-No.D € €
39,00 78,0046,00 92,0046,00 92,0046,00 92,0046,00 92,0046,00 92,0054,00 108,0054,00 108,0054,00 108,0054,00 108,0054,00 108,0054,00 108,0054,00 108,0054,00 108,0054,00 108,0054,00 108,0066,00 132,0066,00 132,0066,00 132,0066,00 132,0066,00 132,0066,00 132,0066,00 132,0066,00 132,0069,00 138,0069,00 138,0069,00 138,0069,00 138,0086,00 172,0086,00 172,0086,00 172,0086,00 172,0086,00 172,0086,00 172,0086,00 172,0086,00 172,0086,00 172,0086,00 172,0086,00 172,0086,00 172,0086,00 172,0086,00 172,0090,00 180,0090,00 180,00
101,50 203,00101,50 203,00101,50 203,00101,50 203,00101,50 203,00101,50 203,00
23
Mf
M 46 x 1.5 140 40 36 29.0 26581M 48 x 1.0 140 40 36 29.0 26583M 48 x 1.5 140 40 36 29.0 26582M 48 x 2.0 140 40 36 29.0 26584M 48 x 3.0 140 40 36 29.0 26586M 50 x 1.5 140 40 36 29.0 26588M 50 x 2.0 140 40 36 29.0 26590M 50 x 3.0 140 40 36 29.0 26592M 52 x 1.5 140 40 40 32.0 26594M 52 x 2.0 140 40 40 32.0 26596M 52 x 3.0 140 40 40 32.0 26598M 54 x 1.0 140 32 40 32.0 28118M 54 x 1.5 140 32 40 32.0 28001M 54 x 2.0 140 36 40 32.0 28002M 54 x 3.0 140 40 40 32.0 28003M 54 x 4.0 180 50 40 32.0 28004M 55 x 1.5 140 32 40 32.0 28005M 55 x 2.0 140 36 40 32.0 28006M 55 x 3.0 140 40 40 32.0 28007M 55 x 4.0 180 50 40 32.0 28008M 56 x 1.0 140 32 40 32.0 28119M 56 x 1.5 140 32 40 32.0 28009M 56 x 2.0 140 36 40 32.0 28010M 56 x 3.0 140 40 40 32.0 28011M 56 x 4.0 180 50 40 32.0 28012M 58 x 1.0 160 32 45 35.0 28120M 58 x 1.5 160 32 45 35.0 28013M 58 x 2.0 160 36 45 35.0 28014M 58 x 3.0 160 40 45 35.0 28015M 58 x 4.0 200 55 45 35.0 28016M 60 x 1.5 160 34 45 35.0 28017M 60 x 2.0 160 36 45 35.0 28018M 60 x 3.0 160 40 45 35.0 28019M 60 x 4.0 200 55 45 35.0 28020M 62 x 1.5 160 34 50 39.0 28021M 62 x 2.0 160 36 50 39.0 28022M 62 x 3.0 180 45 50 39.0 28023M 62 x 4.0 220 55 50 39.0 28024M 63 x 1.5 160 32 50 39.0 28025M 64 x 1.5 160 34 50 39.0 28026M 64 x 2.0 160 36 50 39.0 28027M 64 x 3.0 180 45 50 39.0 28028M 64 x 4.0 220 60 50 39.0 28029M 65 x 1.5 160 34 50 39.0 28030M 65 x 2.0 160 36 50 39.0 28031M 65 x 3.0 180 45 50 39.0 28032M 65 x 4.0 220 60 50 39.0 28033M 68 x 1.5 160 36 50 39.0 28034M 68 x 2.0 160 40 50 39.0 28035M 68 x 3.0 180 50 50 39.0 28036
Hand Tapsmetric-fine ISO-thread DIN 13
Maschi a manofilettatura metrica fine ISO DIN 13
DIN 2181 HSS-G Tol. ISO2/6H
Nominal Diameter L 1 L 2 D 2 Art.-No.D € €
101,50 203,00121,00 242,00121,00 242,00121,00 242,00121,00 242,00133,00 266,00133,00 266,00133,00 266,00160,00 320,00160,00 320,00160,00 320,00173,00 346,00173,00 346,00173,00 346,00173,00 346,00173,00 346,00197,00 394,00197,00 394,00197,00 394,00197,00 394,00220,00 440,00220,00 440,00220,00 440,00220,00 440,00220,00 440,00236,00 472,00225,00 450,00225,00 450,00225,00 450,00225,00 450,00236,00 472,00236,00 472,00236,00 472,00236,00 472,00270,00 540,00270,00 540,00270,00 540,00270,00 540,00279,00 558,00279,00 558,00279,00 558,00279,00 558,00279,00 558,00295,00 590,00295,00 590,00295,00 590,00295,00 590,00304,50 609,00304,50 609,00304,50 609,00
24
Mf
M 68 x 4.0 220 60 50 39.0 28037M 70 x 1.5 160 36 50 39.0 28038M 70 x 2.0 160 40 50 39.0 28039M 70 x 3.0 200 50 50 39.0 28040M 70 x 4.0 240 60 50 39.0 28041M 72 x 1.5 160 36 50 39.0 28042M 72 x 2.0 160 40 50 39.0 28043M 72 x 3.0 200 50 50 39.0 28044M 72 x 4.0 240 60 50 39.0 28045M 74 x 1.5 160 36 50 39.0 28046M 74 x 2.0 160 40 50 39.0 28047M 74 x 3.0 200 50 50 39.0 28048M 74 x 4.0 240 60 50 39.0 28049M 75 x 1.5 160 36 50 39.0 28050M 75 x 2.0 160 40 50 39.0 28051M 75 x 3.0 200 50 50 39.0 28052M 75 x 4.0 240 60 50 39.0 28053M 76 x 1.5 160 36 50 39.0 28054M 76 x 2.0 160 40 50 39.0 28055M 76 x 3.0 220 50 50 39.0 28056M 76 x 4.0 260 60 50 39.0 28057M 78 x 1.5 160 36 50 39.0 28058M 78 x 2.0 160 40 50 39.0 28059M 78 x 3.0 220 55 50 39.0 28060M 78 x 4.0 260 65 50 39.0 28061M 80 x 1.5 160 36 50 39.0 28062M 80 x 2.0 160 40 50 39.0 28063M 80 x 3.0 220 55 50 39.0 28064M 80 x 4.0 260 65 50 39.0 28065M 82 x 1.5 160 36 50 39.0 28066M 82 x 2.0 160 40 50 39.0 28067M 82 x 3.0 220 55 50 39.0 28068M 82 x 4.0 260 65 50 39.0 28069M 84 x 1.5 160 36 50 39.0 28070M 84 x 2.0 160 40 50 39.0 28071M 84 x 3.0 220 55 50 39.0 28072M 84 x 4.0 260 65 50 39.0 28073M 85 x 1.5 160 36 50 39.0 28074M 85 x 2.0 160 40 50 39.0 28075M 85 x 3.0 220 55 50 39.0 28076M 85 x 4.0 260 65 50 39.0 28077M 86 x 1.5 160 36 50 39.0 28078M 86 x 2.0 160 40 50 39.0 28079M 86 x 3.0 220 55 50 39.0 28080M 86 x 4.0 260 65 50 39.0 28081M 88 x 1.5 160 38 50 39.0 28082M 88 x 2.0 160 40 50 39.0 28083M 88 x 3.0 220 55 50 39.0 28084M 88 x 4.0 260 65 50 39.0 28085M 90 x 1.5 160 38 50 39.0 28086
Hand Tapsmetric-fine ISO-thread DIN 13
Maschi a manofilettatura metrica fine ISO DIN 13
DIN 2181 HSS-G Tol. ISO2/6H
Nominal Diameter L 1 L 2 D 2 Art.-No.D € €
304,50 609,00533,00 1.066,00533,00 1.066,00603,00 1.206,00603,00 1.206,00533,00 1.066,00533,00 1.066,00603,00 1.206,00603,00 1.206,00588,00 1.176,00588,00 1.176,00693,00 1.386,00693,00 1.386,00594,00 1.188,00594,00 1.188,00700,00 1.400,00700,00 1.400,00603,00 1.206,00603,00 1.206,00745,00 1.490,00745,00 1.490,00603,00 1.206,00603,00 1.206,00745,00 1.490,00745,00 1.490,00656,00 1.312,00656,00 1.312,00819,00 1.638,00819,00 1.638,00656,00 1.312,00656,00 1.312,00819,00 1.638,00819,00 1.638,00766,00 1.532,00766,00 1.532,00924,00 1.848,00924,00 1.848,00992,00 1.984,00992,00 1.984,00
1.213,00 2.426,001.213,00 2.426,00
992,00 1.984,00992,00 1.984,00
1.213,00 2.426,001.213,00 2.426,001.087,00 2.174,001.087,00 2.174,001.249,00 2.498,001.249,00 2.498,001.107,00 2.214,00
25
Mf
M 90 x 2.0 160 40 50 39.0 28087M 90 x 3.0 220 55 50 39.0 28088M 90 x 4.0 260 65 50 39.0 28089M 92 x 1.5 180 40 56 44.0 28090M 92 x 2.0 180 45 56 44.0 28091M 92 x 3.0 240 60 56 44.0 28092M 92 x 4.0 280 70 56 44.0 28093M 95 x 1.5 180 40 56 44.0 28094M 95 x 2.0 180 45 56 44.0 28095M 95 x 3.0 240 60 56 44.0 28096M 95 x 4.0 280 70 56 44.0 28097M 96 x 1.5 180 40 56 44.0 28098M 96 x 2.0 180 45 56 44.0 28099M 96 x 3.0 240 60 56 44.0 28100M 96 x 4.0 280 70 56 44.0 28101M 98 x 1.5 180 40 56 44.0 28102M 98 x 2.0 180 45 56 44.0 28103M 98 x 3.0 240 60 56 44.0 28104M 98 x 4.0 280 70 56 44.0 28105M 100 x 1.5 180 45 56 44.0 28106M 100 x 2.0 180 50 56 44.0 28107M 100 x 3.0 240 65 56 44.0 28108M 100 x 4.0 280 75 56 44.0 28109M 105 x 1.5 180 45 56 44.0 28110M 105 x 2.0 180 50 56 44.0 28111M 105 x 3.0 240 65 56 44.0 28112M 105 x 4.0 280 75 56 44.0 28113M 110 x 1.5 180 45 56 44.0 28114M 110 x 2.0 180 50 56 44.0 28115M 110 x 3.0 240 65 56 44.0 28116M 110 x 4.0 280 75 56 44.0 28117
Hand Tapsmetric-fine ISO-thread DIN 13
Maschi a manofilettatura metrica fine ISO DIN 13
DIN 2181 HSS-G Tol. ISO2/6H
Nominal Diameter L 1 L 2 D 2 Art.-No.D € €
1.107,00 2.214,001.338,00 2.676,001.338,00 2.676,001.134,00 2.268,001.134,00 2.268,001.433,00 2.866,001.433,00 2.866,001.223,00 2.446,001.223,00 2.446,001.617,00 3.234,001.567,00 3.134,001.223,00 2.446,001.223,00 2.446,001.617,00 3.234,001.617,00 3.234,001.318,00 2.636,001.318,00 2.636,001.733,00 3.466,001.733,00 3.466,001.501,00 3.002,001.501,00 3.002,001.822,00 3.644,001.822,00 3.644,001.617,00 3.234,001.617,00 3.234,001.964,00 3.928,001.964,00 3.928,001.800,00 3.600,001.800,00 3.600,002.215,00 4.430,002.215,00 4.430,00
26
BSW
BSW 1/8 = 22306BSW 1/8, No. 1 = 22306-1BSW 1/8, No. 2 = 22306-2BSW 1/8, No. 3 = 22306-3
BSW 1/16 x 60 36 10 2.5 2.1 22302BSW 3/32 x 48 36 10 2.8 2.1 22304BSW 1/8 x 40 40 12 3.5 2.7 22306BSW 5/32 x 32 45 14 4.5 3.4 22308BSW 3/16 x 24 50 18 6.0 4.9 22310BSW 7/32 x 24 50 18 6.0 4.9 22312BSW 1/4 x 20 50 19 6.0 4.9 22314BSW 5/16 x 18 56 22 6.0 4.9 22316BSW 3/8 x 16 70 24 7.0 5.5 22318BSW 7/16 x 14 70 24 8.0 6.2 22320BSW 1/2 x 12 75 29 9.0 7.0 22322BSW 9/16 x 12 80 30 11.0 9.0 22324BSW 5/8 x 11 80 32 12.0 9.0 22326BSW 3/4 x 10 95 40 14.0 11.0 22330BSW 7/8 x 9 100 40 18.0 14.5 22334BSW 1" x 8 110 50 18.0 14.5 22338BSW 1.1/8 x 7 132 56 22.0 18.0 22342BSW 1.1/4 x 7 132 56 22.0 18.0 22346BSW 1.3/8 x 6 150 63 28.0 22.0 22350BSW 1.1/2 x 6 150 63 32.0 24.0 22354BSW 1.5/8 x 5 160 70 32.0 24.0 22358BSW 1.3/4 x 5 160 70 36.0 29.0 22362BSW 1.7/8 x 4.1/2 190 80 36.0 29.0 22366BSW 2" x 4.1/2 190 80 40.0 32.0 22370BSW 2.1/4 x 4 220 80 45.0 35.0 22372BSW 2.1/2 x 4 220 80 50.0 39.0 22374BSW 2.3/4 x 3.1/2 240 80 50.0 39.0 22376BSW 3" x 3.1/2 260 80 50.0 39.0 22378
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
Hand TapsWhitworth-thread BS 84
Maschi a manofilettatura Whitworth BS 84
� DIN 352 HSS-G
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Application:
for general use- non abrasive material up to 900 N/mm²- unalloyed and low alloyed steel- for through and blind holes- for thread cutting by hand
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- Fori passanti e ciechi- Uso manuale
How to order/esempio come ordinare:
€ €5,70 17,104,60 13,804,10 12,304,10 12,304,00 12,004,00 12,004,00 12,004,50 13,505,00 15,006,30 18,907,60 22,80
10,00 30,0011,20 33,6015,00 45,0020,00 60,0023,00 69,0035,50 106,5040,00 120,0052,00 156,0060,00 180,00
120,00 360,00120,00 360,00156,00 468,00156,00 468,00340,00 1.020,00435,00 1.305,00
1.120,00 3.360,001.440,00 4.320,00
27
BSF
BSF 1/4 = 22714BSF 1/4, No. 1 = 22714-1BSF 1/4, No. 3 = 22714-3
BSF 3/16 x 32 50 14 6.0 4.9 22710BSF 1/4 x 26 50 18 6.0 4.9 22714BSF 5/16 x 22 56 22 6.0 4.9 22716BSF 3/8 x 20 63 22 7.0 5.5 22718BSF 7/16 x 18 63 22 8.0 6.2 22720BSF 1/2 x 16 75 24 9.0 7.0 22722BSF 9/16 x 16 80 28 11.0 9.0 22724BSF 5/8 x 14 80 28 12.0 9.0 22726BSF 3/4 x 12 95 32 14.0 11.0 22730BSF 7/8 x 11 100 36 18.0 14.5 22734BSF 1" x 10 110 40 18.0 14.5 22738
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
Hand TapsBritish-Standard-Fine-thread BS 84
Maschi a manofilettatura Whitworth fine BS 84
� DIN 2181 HSS-G
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Application:
for general use- non abrasive material up to 900 N/mm²- unalloyed and low alloyed steel- for through and blind holes- for thread cutting by hand
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- Fori passanti e ciechi- Uso manuale
How to order/esempio come ordinare:
€ €4,00 8,004,00 8,004,50 9,005,00 10,006,30 12,607,60 15,20
10,00 20,0011,20 22,4015,00 30,0020,00 40,0023,00 46,00
28
BSW 1/8 = 22306BSW 1/8, No. 1 = 22306-1BSW 1/8, No. 2 = 22306-2BSW 1/8, No. 3 = 22306-3
BA 0 66 19 6.3 5.0 89400BA 1 62 17 5.6 4.5 89401BA 2 58 16 5.0 4.0 89402BA 3 53 13 4.5 3.55 89403BA 4 50 13 3.55 2.8 89404BA 5 48 11 3.15 2.5 89405BA 6 45 9.5 2.8 2.24 89406
BA
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Hand Taps, non-serial formBA-thread BS 93
Maschi a mano, versione conicafilettatura BA, BS 93
ISO 529 HSS-G
Application:
for general use- non abrasive material up to 900 N/mm²- unalloyed and low alloyed steel- for through and blind holes- for thread cutting by hand
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- Fori passanti e ciechi- Uso manuale
How to order/esempio come ordinare:
€ €5,70 17,105,70 17,105,70 17,105,70 17,105,70 17,105,70 17,105,70 17,10
29
UNC
UNC 1/4 = 23314UNC 1/4, No. 1 = 23314-1UNC 1/4, No. 2 = 23314-2UNC 1/4, No. 3 = 23314-3
UNC Nr. 1 x 64 32 10 2.5 2.1 23301UNC Nr. 2 x 56 36 11 2.8 2.1 23302UNC Nr. 3 x 48 36 11 2.8 2.1 23303UNC Nr. 4 x 40 40 12 3.5 2.7 23304UNC Nr. 5 x 40 40 12 3.5 2.7 23305UNC Nr. 6 x 32 45 14 4.0 3.0 23306UNC Nr. 8 x 32 45 14 4.5 3.4 23308UNC Nr. 10 x 24 50 16 6.0 4.9 23310UNC Nr. 12 x 24 50 18 6.0 4.9 23312UNC 1/4 x 20 50 19 6.0 4.9 23314UNC 5/16 x 18 56 22 6.0 4.9 23316UNC 3/8 x 16 70 24 7.0 5.5 23318UNC 7/16 x 14 70 24 8.0 6.2 23320UNC 1/2 x 13 75 29 9.0 7.0 23322UNC 9/16 x 12 80 30 11.0 9.0 23324UNC 5/8 x 11 80 32 12.0 9.0 23326UNC 3/4 x 10 95 40 14.0 11.0 23330UNC 7/8 x 9 100 40 18.0 14.5 23334UNC 1" x 8 110 50 18.0 14.5 23338UNC 1.1/8 x 7 132 56 22.0 18.0 23342UNC 1.1/4 x 7 132 56 22.0 18.0 23346UNC 1.3/8 x 6 150 63 28.0 22.0 23350UNC 1.1/2 x 6 150 63 32.0 24.0 23354UNC 1.5/8 x 5 160 70 32.0 24.0 23358UNC 1.3/4 x 5 160 70 36.0 29.0 23362UNC 1.7/8 x 4.1/2 190 80 36.0 29.0 23366UNC 2" x 4.1/2 190 80 40.0 32.0 23370UNC 2.1/4 x 4.1/2 220 80 45.0 35.0 23372UNC 2.1/2 x 4 220 80 50.0 39.0 23374UNC 2.3/4 x 4 240 80 50.0 39.0 23376UNC 3" x 4 260 80 50.0 39.0 23378
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Hand TapsUnified Coarse thread ANSI B 1.1
Maschi a manofilettatura unificata, serie grossa ANSI B1.1
� DIN 352 HSS-G Tol. 2B
Application:
for general use- non abrasive material up to 900 N/mm²- unalloyed and low alloyed steel- for through and blind holes- for thread cutting by hand
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- Fori passanti e ciechi- Uso manuale
How to order/esempio come ordinare:
€ €12,50 37,5012,50 37,5012,50 37,507,60 22,807,60 22,807,60 22,807,60 22,807,60 22,807,60 22,804,00 12,004,50 13,505,00 15,006,30 18,907,60 22,80
10,00 30,0011,20 33,6015,00 45,0020,00 60,0023,00 69,0035,50 106,5040,00 120,0052,00 156,0060,00 180,00
120,00 360,00120,00 360,00156,00 468,00156,00 468,00325,00 975,00418,00 1.254,00
1.067,00 3.201,001.375,00 4.125,00
30
UNF 1/4 = 24314UNF 1/4, No. 1 = 24314-1UNF 1/4, No. 3 = 24314-3
UNF
UNF Nr. 0 x 80 28 8 2.5 2.1 24300UNF Nr. 1 x 72 32 9 2.8 2.1 24301UNF Nr. 2 x 64 32 10 2.8 2.1 24302UNF Nr. 3 x 56 32 10 2.8 2.1 24303UNF Nr. 4 x 48 36 11 3.5 2.7 24304UNF Nr. 5 x 44 36 11 3.5 2.7 24305UNF Nr. 6 x 40 40 12 4.5 3.4 24306UNF Nr. 8 x 36 40 12 4.5 3.4 24308UNF Nr. 10 x 32 45 14 6.0 4.9 24310UNF Nr. 12 x 28 50 14 6.0 4.9 24312UNF 1/4 x 28 50 18 6.0 4.9 24314UNF 5/16 x 24 56 22 6.0 4.9 24316UNF 3/8 x 24 63 22 7.0 5.5 24318UNF 7/16 x 20 63 22 8.0 6.2 24320UNF 1/2 x 20 75 24 9.0 7.0 24322UNF 9/16 x 18 80 28 11.0 9.0 24324UNF 5/8 x 18 80 28 12.0 9.0 24326UNF 3/4 x 16 95 32 14.0 11.0 24330UNF 7/8 x 14 100 36 18.0 14.5 24334UNF 1" x 12 110 40 18.0 14.5 24338UNF 1" x 14 110 40 18.0 14.5 24340UNF 1.1/8 x 12 110 50 22.0 18.0 24342UNF 1.1/4 x 12 132 56 22.0 18.0 24346UNF 1.3/8 x 12 132 56 28.0 22.0 24350UNF 1.1/2 x 12 150 63 32.0 24.0 24354
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
Hand TapsUnified Fine thread ANSI B 1.1
Maschi a manofilettatura unificata, serie fina ANSI B1.1
� DIN 2181 HSS-G Tol. 2B
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Application:
for general use- non abrasive material up to 900 N/mm²- unalloyed and low alloyed steel- for through and blind holes- for thread cutting by hand
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- Fori passanti e ciechi- Uso manuale
How to order/esempio come ordinare:
€ €12,50 25,0012,50 25,0012,50 25,0012,50 25,00
7,60 15,207,60 15,207,60 15,207,60 15,207,60 15,207,60 15,204,00 8,004,50 9,005,00 10,006,30 12,607,60 15,20
10,00 20,0011,20 22,4015,00 30,0020,00 40,0023,00 46,0025,00 50,0035,50 71,0040,00 80,0052,00 104,0060,00 120,00
31
UNEF 1/4 = 83821UNEF 1/4, No. 1 = 83821-1UNEF 1/4, No. 2 = 83821-2UNEF 1/4, No. 3 = 83821-3
UNEF
UNEF 1/4 x 32 66 19 6.3 5.0 83821UNEF 5/16 x 32 72 22 8.0 6.3 83822UNEF 3/8 x 32 80 24 10.0 8.0 83823UNEF 7/16 x 28 85 25 8.0 6.3 83824UNEF 1/2 x 28 89 29 9.0 7.1 83825UNEF 9/16 x 24 95 30 11.2 9.0 83826UNEF 5/8 x 24 102 32 12.5 10.0 83827UNEF 3/4 x 20 112 37 14.0 11.2 83829UNEF 7/8 x 20 118 38 16.0 12.5 83831UNEF 1" x 20 130 45 16.0 14.0 83833
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
Hand Taps, non-serial formUnified Extra Fine thread ANSI B 1.1
Maschi a mano, versione conicafilettatura unificata, serie extra-fina ANSI B1.1
ISO 529 HSS-G Tol. 2B
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Application:
for general use- non abrasive material up to 900 N/mm²- unalloyed and low alloyed steel- for through and blind holes- for thread cutting by hand
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- Fori passanti e ciechi- Uso manuale
How to order/esempio come ordinare:
€ €4,80 14,405,40 16,206,10 18,307,60 22,809,00 27,00
12,00 36,0013,50 40,5018,00 54,0024,30 72,9027,80 83,40
32
G 1/4 = 25314G 1/4, No. 1 = 25314-1G 1/4, No. 2 = 25314-2
G (BSP)
G 1/8 x 28 63 20 7 5.5 25312G 1/4 x 19 70 22 11 9.0 25314G 3/8 x 19 70 22 12 9.0 25316G 1/2 x 14 80 22 16 12.0 25318G 5/8 x 14 80 22 18 14.5 25320G 3/4 x 14 90 22 20 16.0 25322G 7/8 x 14 90 22 22 18.0 25324G 1" x 11 100 25 25 20.0 25326G 1.1/8 x 11 125 40 28 22.0 25330G 1.1/4 x 11 125 40 32 24.0 25334G 1.3/8 x 11 140 40 36 29.0 25338G 1.1/2 x 11 140 40 36 29.0 25342G 1.5/8 x 11 140 40 40 32.0 25346G 1.3/4 x 11 140 40 40 32.0 25350G 2" x 11 160 40 45 35.0 25354G 2.1/4 x 11 160 40 50 39.0 25358G 2.1/2 x 11 160 40 50 39.0 25362G 2.3/4 x 11 160 40 50 39.0 25366G 3" x 11 160 40 50 39.0 25370G 3.1/2 x 11 180 45 56 44.0 25374G 4" x 11 180 45 56 44.0 25378
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
Hand TapsPipe-thread DIN ISO 228
Maschi a manofilettatura per tubi gas DIN ISO 228
DIN 5157 HSS-G
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Application:
for general use- non abrasive material up to 900 N/mm²- unalloyed and low alloyed steel- for through and blind holes- for thread cutting by hand
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- Fori passanti e ciechi- Uso manuale
How to order/esempio come ordinare:
€ €5,20 10,405,70 11,408,60 17,20
11,80 23,6017,20 34,4017,20 34,4029,00 58,0029,00 58,0050,50 101,0050,50 101,0069,00 138,0069,00 138,00
168,00 336,00138,00 276,00138,00 276,00310,00 620,00399,00 798,00730,00 1.460,00850,00 1.700,00
1.340,00 2.680,001.670,00 3.340,00
33
PG
PG 7 = 25707PG 7, No. 1 = 25707-1PG 7, No. 2 = 25707-2
PG 7 x 20 70 22 9.0 7.0 25707PG 9 x 18 70 22 12.0 9.0 25709PG 11 x 18 80 22 14.0 11.0 25711PG 13.5 x 18 80 22 16.0 12.0 25713PG 16 x 18 80 22 18.0 14.5 25716PG 21 x 16 90 22 22.0 18.0 25721PG 29 x 16 100 25 28.0 22.0 25729PG 36 x 16 140 40 36.0 29.0 25736PG 42 x 16 140 40 40.0 32.0 25742PG 48 x 16 160 40 45.0 35.0 25748
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
Hand Tapsarmoured tube thread DIN 40 430
Maschi a manofilettatura per tubi corazzati DIN 40 430
DIN 40432 HSS-G
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Application:
for general use- non abrasive material up to 900 N/mm²- unalloyed and low alloyed steel- for through and blind holes- for thread cutting by hand
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- Fori passanti e ciechi- Uso manuale
How to order/esempio come ordinare:
€ €10,00 20,0013,00 26,0022,00 44,0026,00 52,0031,50 63,0043,00 86,0071,00 142,00
113,00 226,00177,00 354,00210,00 420,00
34
Tr 10x2 = 25108Tr 10x2, No. 1 = 25108-1Tr 10x2, No. 2 = 25108-2Tr 10x2, No. 3 = 25108-3
Tr
Tr 10 x 2 90 34 7 5.5 25108Tr 10 x 3 100 40 7 5.5 25112Tr 12 x 3 110 40 8 6.2 25116Tr 14 x 3 130 45 10 8.0 25120Tr 14 x 4 130 55 10 8.0 25124Tr 16 x 4 140 55 11 9.0 25128Tr 18 x 4 150 55 12 9.0 25132Tr 20 x 4 160 55 14 11.0 25136Tr 22 x 5 175 65 16 12.0 25140Tr 24 x 5 190 65 18 14.5 25144Tr 26 x 5 210 70 20 16.0 25148Tr 28 x 5 220 70 22 18.0 25152Tr 30 x 6 240 80 22 18.0 25156Tr 32 x 6 255 80 25 20.0 25160
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
Hand Tapstrapezoidal thread DIN 103
Maschi a manofilettatura trapeziodale metrica ISO 103
HSS-G Tol. 7H
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Application:
for general use- non abrasive material up to 900 N/mm²- unalloyed and low alloyed steel- for through and blind holes- for thread cutting by hand
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- Fori passanti e ciechi- Uso manuale
How to order/esempio come ordinare:
€ €93,00 279,0093,00 279,0097,00 291,00
127,00 381,00127,00 381,00114,00 342,00174,00 522,00185,00 555,00235,00 705,00258,00 774,00286,00 858,00312,00 936,00332,00 996,00405,00 1.215,00
35
M
M3 = 57326M3, No. 1 = 57326-1M3, No. 2 = 57326-2M3, No. 3 = 57326-3
M 3 x 0.5 40 11 3.5 2.7 57326M 4 x 0.7 45 13 4.5 3.4 57330M 5 x 0.8 50 16 6.0 4.9 57334M 6 x 1.0 50 19 6.0 4.9 57338M 8 x 1.25 56 22 6.0 4.9 57342M 10 x 1.5 70 24 7.0 5.5 57346M 12 x 1.75 75 29 9.0 7.0 57350M 14 x 2.0 80 30 11.0 9.0 57354M 16 x 2.0 80 32 12.0 9.0 57358M 18 x 2.5 95 40 14.0 11.0 57362M 20 x 2.5 95 40 16.0 12.0 57366M 22 x 2.5 100 40 18.0 14.5 57370M 24 x 3.0 110 50 18.0 14.5 57374M 27 x 3.0 110 50 20.0 16.0 57376M 30 x 3.5 125 56 22.0 18.0 57378
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
Hand Tapsmetric ISO-thread DIN 13
Maschi a manofilettatura metrica ISO DIN 13
DIN 352 HSS-E Tol. ISO2/6H
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Application:
- high cutting ability- abrasive material- steels up to 1200 N/mm²- and general use
Applicazione:
- elevata durata- materiali di difficile truciolabilità- Acciaio R fino a 1.200 N/mm²- e per uso universale
How to order/esempio come ordinare:
€ €4,10 12,304,20 12,604,40 13,204,40 13,205,00 15,006,70 20,108,80 26,40
11,00 33,0013,20 39,6016,80 50,4019,40 58,2025,20 75,6029,40 88,2047,50 142,5065,00 195,00
36
M
M 3 x 0.5 40 11 3.5 2.7 57726M 4 x 0.7 45 13 4.5 3.4 57730M 5 x 0.8 50 16 6.0 4.9 57734M 6 x 1.0 50 19 6.0 4.9 57738M 8 x 1.25 56 22 6.0 4.9 57742M 10 x 1.5 70 24 7.0 5.5 57746M 12 x 1.75 75 29 9.0 7.0 57750
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
M 3 = 57726M 3, No. 1 = 57726-1M 3, No. 2 = 57726-2M 3, No. 3 = 57726-3
Nominal Diameter L 1 L 2 D 2 Art.-No.D
How to order / esempio come ordinare:
Hand Taps metric ISO-thread DIN 13Rougher piloted
Maschi a manofilettatura metrica ISO DIN 13Sgrossatore con guida
DIN 352 HSS-E Tol. ISO2/6H
Application:wear resistant steel up to 1400 N/mm²- high alloy steel- heat resistant steel- stainless steel- alloy tool steel- cast ironSurface treatment: steam tempered
Applicazione:Acciaio ad alta resistenza R a 1.400 N/mm²- Acciaio alto legato- Acciaio resistenti al calore- Acciaio inossidabili - Acciaio per utensili legato- Ghisia grigiaSuperficie: vaporizzato
€ €8,00 24,008,00 24,008,70 26,108,70 26,109,40 28,20
12,70 38,1017,30 51,90
37
Mf
M 6 x 0.75 = 56318M 6 x 0.75, No. 1 = 56318-1M 6 x 0.75, No. 2 = 56318-2
M 6 x 0.75 50 14 6.0 4.9 56318M 8 x 0.75 50 19 6.0 4.9 56324M 8 x 1.0 56 22 6.0 4.9 56326M 10 x 1.0 63 20 7.0 5.5 56336M 10 x 1.25 70 24 7.0 5.5 56338M 12 x 1.0 70 22 9.0 7.0 56344M 12 x 1.25 70 22 9.0 7.0 56346M 12 x 1.5 70 22 9.0 7.0 56348M 14 x 1.25 70 22 11.0 9.0 56354M 14 x 1.5 70 22 11.0 9.0 56356M 16 x 1.5 70 22 12.0 9.0 56366M 18 x 1.5 80 22 14.0 11.0 56372M 18 x 2.0 80 22 14.0 11.0 56374M 20 x 1.5 80 22 16.0 12.0 56384M 20 x 2.0 80 22 16.0 12.0 56386M 22 x 1.5 80 22 18.0 14.5 56394M 22 x 2.0 80 22 18.0 14.5 56396M 24 x 1.5 90 22 18.0 14.5 56504
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
Nominal Diameter L 1 L 2 D 2 Art.-No.D
How to order / esempio come ordinare:
Hand Tapsmetric-fine ISO-thread DIN 13
Maschi a manofilettatura metrica ISO DIN 13
DIN 2181 HSS-E Tol. ISO2/6H
Application:
- high cutting ability - abrasive material- steels up to 1200 N/mm²- and general use
Applicazione:
- elevata durata- materiali di difficile truciolabilità- Acciaio R fino a 1.200 N/mm²- e per uso universale
€ €7,60 15,207,60 15,207,60 15,208,30 16,609,60 19,20
11,50 23,0011,50 23,0011,50 23,0013,30 26,6012,10 24,2015,30 30,6016,00 32,0021,30 42,6020,00 40,0026,80 53,6024,90 49,8026,80 53,6027,80 55,60
38
G (BSP)
G 1/8 x 28 63 20 7.0 5.5 55312G 1/4 x 19 70 22 11.0 9.0 55314G 3/8 x 19 70 22 12.0 9.0 55316G 1/2 x 14 80 22 16.0 12.0 55318G 3/4 x 14 90 22 20.0 16.0 55322G 1" x 11 100 25 25.0 20.0 55326D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
G 1/4 = 55314G 1/4, No. 1 = 55314-1G 1/4, No. 2 = 55314-2
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Hand TapsPipe-thread DIN ISO 228
Maschi a manofilettatura per tubi gas DIN ISO 228
DIN 5157 HSS-E
Application:
- high cutting ability- abrasive material- steels up to 1200 N/mm²- and general use
Applicazione:
- elevata durata- materiali di difficile truciolabilità- Acciaio R fino a 1.200 N/mm²- e per uso universale
How to order/esempio come ordinare:
€ €7,60 15,209,00 18,00
13,50 27,0018,60 37,2025,40 50,8041,50 83,00
39
M
M3 = 27026M3, No. 1 = 27026-1M3, No. 2 = 27026-2M3, No. 3 = 27026-3
M 3 x 0.5 40 11 3.5 2.7 27026M 4 x 0.7 45 13 4.5 3.4 27030M 5 x 0.8 50 16 6.0 4.9 27034M 6 x 1.0 50 19 6.0 4.9 27038M 8 x 1.25 56 22 6.0 4.9 27042M 10 x 1.5 70 24 7.0 5.5 27046M 12 x 1.75 75 29 9.0 7.0 27050M 14 x 2.0 80 30 11.0 9.0 27054M 16 x 2.0 80 32 12.0 9.0 27058M 18 x 2.5 95 40 14.0 11.0 27062M 20 x 2.5 95 40 16.0 12.0 27066M 22 x 2.5 100 40 18.0 14.5 27070M 24 x 3.0 110 50 18.0 14.5 27074M 27 x 3.0 110 50 20.0 16.0 27076M 30 x 3.5 125 56 22.0 18.0 27078M 33 x 3.5 125 56 25.0 20.0 27080M 36 x 4.0 150 63 28.0 22.0 27082M 39 x 4.0 150 63 32.0 24.0 27084M 42 x 4.5 150 63 32.0 24.0 27086M 45 x 4.5 160 70 36.0 29.0 27088M 48 x 5.0 180 75 36.0 29.0 27090M 52 x 5.0 180 75 40.0 32.0 27092
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Hand Taps, Left Handmetric ISO-thread DIN 13
Maschi a mano, filetto sinistrofilettatura metrica fine ISO DIN 13
DIN 352 HSS-G Tol. ISO2/6H
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through and blind holes- for thread cutting by hand
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- Fori passanti e ciechi- Uso manuale
How to order/esempio come ordinare:
€ €3,70 11,103,70 11,104,30 12,904,50 13,504,80 14,406,20 18,608,50 25,50
10,10 30,3012,20 36,6016,10 48,3018,00 54,0022,00 66,0027,30 81,9044,00 132,0055,00 165,0074,00 222,0089,00 267,00
114,00 342,00130,00 390,00157,00 471,00222,00 666,00222,00 666,00
40
Mf
M 6 x 0.75 = 26007M 6 x 0.75, No. 1 = 26007-1M 6 x 0.75, No. 2 = 26007-2
M 6 x 0.75 50 14 6.0 4.9 26007M 8 x 0.75 50 19 6.0 4.9 26010M 8 x 1.0 56 22 6.0 4.9 26011M 10 x 1.0 63 20 7.0 5.5 26015M 10 x 1.25 70 24 7.0 5.5 26016M 12 x 1.0 70 22 9.0 7.0 26020M 12 x 1.25 70 22 9.0 7.0 26021M 12 x 1.5 70 22 9.0 7.0 26022M 14 x 1.25 70 22 11.0 9.0 26027M 14 x 1.5 70 22 11.0 9.0 26028M 16 x 1.0 70 22 12.0 9.0 26031M 16 x 1.5 70 22 12.0 9.0 26033M 18 x 1.5 80 22 14.0 11.0 26036M 20 x 1.5 80 22 16.0 12.0 26040M 22 x 1.5 80 22 18.0 14.5 26045M 24 x 1.5 90 22 18.0 14.5 26050M 24 x 2.0 90 22 18.0 14.5 26051M 30 x 1.5 90 22 22.0 18.0 26063M 30 x 2.0 90 22 22.0 18.0 26064
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
Hand Taps, Left Handmetric-fine ISO-thread DIN 13
Maschi a mano, filetto sinistrofilettatura metrica fine ISO DIN 13
DIN 2181 HSS-G Tol. ISO2/6H
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through and blind holes- for thread cutting by hand
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- Fori passanti e ciechi- Uso manuale
How to order/esempio come ordinare:
€ €8,50 17,008,50 17,008,50 17,008,50 17,009,50 19,00
12,50 25,0012,50 25,0011,50 23,0014,00 28,0012,50 25,0021,00 42,0015,00 30,0017,00 34,0021,00 42,0027,50 55,0030,50 61,0039,90 79,8081,00 162,0081,00 162,00
41
BSW
BSW 1/8 = 22006BSW 1/8, No. 1 = 22006-1BSW 1/8, No. 2 = 22006-2BSW 1/8, No. 3 = 22006-3
BSW 1/8 x 40 40 12 3.5 2.7 22006BSW 5/32 x 32 45 14 4.5 3.4 22008BSW 3/16 x 24 50 18 6.0 4.9 22010BSW 1/4 x 20 50 19 6.0 4.9 22014BSW 5/16 x 18 56 22 6.0 4.9 22016BSW 3/8 x 16 70 24 7.0 5.5 22018BSW 7/16 x 14 70 24 8.0 6.2 22020BSW 1/2 x 12 75 29 9.0 7.0 22022BSW 9/16 x 12 80 30 11.0 9.0 22024BSW 5/8 x 11 80 32 12.0 9.0 22026BSW 3/4 x 10 95 40 14.0 11.0 22030BSW 7/8 x 9 100 40 18.0 14.5 22034BSW 1" x 8 110 50 18.0 14.5 22038
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
Hand Taps, Left HandWhitworth-thread BS 84
Maschi a mano, filetto sinistrofilettatura Whitworth BS 84
� DIN 352 HSS-G
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Application:
for general use- non abrasive material up to 900 N/mm²- unalloyed and low alloyed steel- for through and blind holes- for thread cutting by hand
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- Fori passanti e ciechi- Uso manuale
How to order/esempio come ordinare:
€ €6,60 19,806,60 19,806,60 19,806,60 19,806,90 20,708,00 24,009,80 29,40
11,70 35,1015,30 45,9017,30 51,9023,10 69,3028,80 86,4034,60 103,80
42
UNC 1/4 = 23014UNC 1/4, No. 1 = 23014-1UNC 1/4, No. 2 = 23014-2UNC 1/4, No. 3 = 23014-3
UNC / UNF
UNC Nr. 6 x 32 45 14 4.0 3.0 23006UNC Nr. 8 x 32 45 14 4.5 3.4 23008UNC Nr. 10 x 24 50 16 6.0 4.9 23010UNC Nr. 12 x 24 50 18 6.0 4.9 23012UNC 1/4 x 20 50 19 6.0 4.9 23014UNC 5/16 x 18 56 22 6.0 4.9 23016UNC 3/8 x 16 70 24 7.0 5.5 23018UNC 7/16 x 14 70 24 8.0 6.2 23020UNC 1/2 x 13 75 29 9.0 7.0 23022UNC 9/16 x 12 80 30 11.0 9.0 23024UNC 5/8 x 11 80 32 12.0 9.0 23026UNC 3/4 x 10 95 40 14.0 11.0 23030UNC 7/8 x 9 100 40 18.0 14.5 23034UNC 1" x 8 110 50 18.0 14.5 23038
UNF Nr. 10 x 32 45 14 6.0 4.9 24010UNF 1/4 x 28 50 18 6.0 4.9 24014UNF 5/16 x 24 56 22 6.0 4.9 24016UNF 3/8 x 24 63 22 7.0 5.5 24018UNF 7/16 x 20 63 22 8.0 6.2 24020UNF 1/2 x 20 75 24 9.0 7.0 24022UNF 9/16 x 18 80 28 11.0 9.0 24024UNF 5/8 x 18 80 28 12.0 9.0 24026UNF 3/4 x 16 95 32 14.0 11.0 24030UNF 7/8 x 14 100 36 18.0 14.5 24034UNF 1" x 12 110 40 18.0 14.5 24038
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Hand Taps, Left HandUnified thread ANSI B 1.1
Maschi a mano, filetto sinistrofilettatura unificata ANSI B1.1
� DIN 352 HSS-G Tol. 2B
UNC 3-pcs
UNF 2-pcs
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through and blind holes- for thread cutting by hand
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- Fori passanti e ciechi- Uso manuale
How to order/esempio come ordinare:
€ €
10,40 31,2010,40 31,2010,40 31,2010,40 31,20
6,60 19,806,90 20,708,00 24,009,80 29,40
11,70 35,1015,30 45,9017,30 51,9023,10 69,3028,80 86,4034,60 103,80
10,40 20,806,60 13,206,90 13,808,00 16,009,80 19,60
11,70 23,4015,30 30,6017,30 34,6023,10 46,2028,80 57,6034,60 69,20
43
G (BSP)
G 1/4 = 25014G 1/4, No. 1 = 25014-1G 1/4, No. 2 = 25014-2
G 1/8 x 28 63 20 7.0 5.5 25012G 1/4 x 19 70 22 11.0 9.0 25014G 3/8 x 19 70 22 12.0 9.0 25016G 1/2 x 14 80 22 16.0 12.0 25018G 5/8 x 14 80 22 18.0 14.5 25020G 3/4 x 14 90 22 20.0 16.0 25022G 1" x 11 100 25 25.0 20.0 25026G 1.1/8 x 11 125 40 28.0 22.0 25030G 1.1/4 x 11 125 40 32.0 24.0 25034G 1.3/8 x 11 140 40 36.0 29.0 25038G 1.1/2 x 11 140 40 36.0 29.0 25042G 1.3/4 x 11 140 40 40.0 32.0 25050G 2" x 11 160 40 45.0 35.0 25054
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Hand Taps, Left HandPipe-thread DIN ISO 228
Maschi a mano, filetto sinistrofilettatura per tubi gas DIN ISO 228
DIN 5157 HSS-G
Application:
for general use- non abrasive material up to 900 N/mm²- unalloyed and low alloyed steel- for through and blind holes- for thread cutting by hand
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- Fori passanti e ciechi- Uso manuale
How to order/esempio come ordinare:
€ €8,00 16,009,00 18,00
13,00 26,0017,00 34,0026,00 52,0026,00 52,0044,00 88,0076,00 152,0076,00 152,00
100,50 201,00100,50 201,00207,00 414,00207,00 414,00
44
SHORT MACHINE TAPSMASCHI A MACCHINA CORTI
Form A 6-8 Threads Lead, for short through holes Imbocco a 6-8 spire, per fori passanti corti
Form B4-5 Threads Lead with Spiral Point for through holes Imbocco a 4-5 spire con imbocco corretto, per tutti i fori passanti
Form C2-3 Threads Lead, for blind holes Imbocco a 2-3 spire, per fori ciechi
Form D4-5 Threads Lead, for through and blind holes Imbocco a 4-5 spire, per fori passante e ciechi
Form C/35° RSP2-3 Threads Lead, 35° Spiral Flute, for blind holes Imbocco a 2-3 spire spirale destra a 35°, per fori ciechi
Form B-AZ4-5 Threads Lead with Spiral Point and interrupted threadsfor through holes Imbocco a 4-5 spire e denti alternati per fori passanti
for thread cutting by hand and machineper uso manuale e con macchina
45
because available because reliable because you
45
Form C Form D Form B 35° RSP B-AZ
M 46 46 46
M (ISO 529) 47 48 47
Mf 49
BSW 50
W (DIN 477) 50
UNC 51
UNF 51
G (BSP) 52
Rc (BSPT) 53 53 53
Rp (BSPP) 54 54
PG 55
NPT 56 56 56
NPT - LH 57
NPTF 58 58
NPS 59 59
SHORT MACHINE TAPSMASCHI A MACCHINA CORTI
46
M
No. 615 No. 617 No. 619
M 3 x 0.5 40 11 3.5 2.7 61526M 4 x 0.7 45 13 4.5 3.4 61530M 5 x 0.8 48 16 6.0 4.9 61534M 6 x 1.0 50 19 6.0 4.9 61538M 8 x 1.25 56 22 6.0 4.9 61542M 10 x 1.5 70 24 7.0 5.5 61546M 12 x 1.75 75 29 9.0 7.0 61550M 14 x 2.0 80 30 11.0 9.0 61554M 16 x 2.0 80 32 12.0 9.0 61558M 18 x 2.5 95 40 14.0 11.0 61562M 20 x 2.5 95 40 16.0 12.0 61566M 22 x 2.5 100 40 18.0 14.5 61570M 24 x 3.0 110 50 18.0 14.5 61574
M 3 x 0.5 40 11 3.5 2.7 61726M 4 x 0.7 45 13 4.5 3.4 61730M 5 x 0.8 48 16 6.0 4.9 61734M 6 x 1.0 50 19 6.0 4.9 61738M 8 x 1.25 56 22 6.0 4.9 61742M 10 x 1.5 70 24 7.0 5.5 61746M 12 x 1.75 75 29 9.0 7.0 61750
M 3 x 0.5 40 11 3.5 2.7 61926M 4 x 0.7 45 13 4.5 3.4 61930M 5 x 0.8 48 16 6.0 4.9 61934M 6 x 1.0 50 19 6.0 4.9 61938M 8 x 1.25 56 22 6.0 4.9 61942M 10 x 1.5 70 24 7.0 5.5 61946M 12 x 1.75 75 29 9.0 7.0 61950
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
Short Machine Tapsmetric ISO-thread DIN 13
Maschi a macchina cortifilettatura metrica ISO DIN 13
DIN 352 HSS-E Tol. ISO2/6H
with interrupted threads / Forma B, con denti alternati
35° Spiral Flute / Forma C, spirale destra a 35°
Spiral Point / Forma B con imbocco corretto
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Application
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for thread cutting by hand and machineSpiral Point: for through holesSpiral Flute: for blind holesForm B-AZ: for through holes
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per uso manuale e con macchinaForma B: per fori passanti35° RSP: per fori ciechiForma B-AZ: per fori passanti
€
3,603,603,704,004,705,708,209,70
13,5016,5018,3026,0029,00
4,504,504,805,005,706,808,80
5,605,605,805,806,207,709,60
47
M
No. 805 No. 809
M 2 x 0.4 41.0 8.0 2.50 2.00 80516M 2.5 x 0.45 44.5 9.5 2.80 2.24 80522M 2.6 x 0.45 44.5 9.5 2.90 2.24 80524M 3 x 0.5 48.0 11.0 3.15 2.50 80526M 3.5 x 0.6 50.0 13.0 3.55 2.80 80528M 4 x 0.7 53.0 13.0 4.00 3.15 80530M 5 x 0.8 58.0 16.0 5.00 4.00 80534M 6 x 1.0 66.0 19.0 6.30 5.00 80538M 8 x 1.25 72.0 22.0 8.00 6.30 80542M 10 x 1.5 80.0 24.0 10.00 8.00 80546M 12 x 1.75 89.0 29.0 9.00 7.10 80550M 14 x 2.0 95.0 30.0 11.20 9.00 80554M 16 x 2.0 102.0 32.0 12.50 10.00 80558M 18 x 2.5 110.0 37.0 14.00 11.20 80562M 20 x 2.5 112.0 37.0 14.00 11.20 80566M 22 x 2.5 118.0 38.0 16.00 12.50 80570M 24 x 3.0 130.0 45.0 18.00 14.00 80574M 27 x 3.0 135.0 45.0 20.00 16.00 80576M 30 x 3.5 138.0 48.0 20.00 16.00 80578
M 3 x 0.5 48.0 11.0 3.15 2.50 80926M 4 x 0.7 53.0 13.0 4.00 3.15 80930M 5 x 0.8 58.0 16.0 5.00 4.00 80934M 6 x 1.0 66.0 19.0 6.30 5.00 80938M 7 x 1.0 66.0 19.0 7.10 5.60 80940M 8 x 1.25 72.0 22.0 8.00 6.30 80942M 10 x 1.5 80.0 24.0 10.0 8.00 80946M 12 x 1.75 89.0 29.0 9.00 7.10 80950M 14 x 2.0 95.0 30.0 11.20 9.00 80954M 16 x 2.0 102.0 32.0 12.50 10.00 80958M 18 x 2.5 110.0 37.0 14.00 11.20 80962M 20 x 2.5 112.0 37.0 14.00 11.20 80966M 22 x 2.5 118.0 38.0 16.00 12.50 80970M 24 x 3.0 130.0 45.0 18.00 14.00 80974
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
Machine Tapsmetric ISO-thread DIN 13
Maschi a macchina cortifilettatura metrica ISO DIN 13
ISO 529 Form B HSS-G Tol. ISO2/6H
Nominal Diameter L 1 L 2 D 2 Art.-No.D
with interrupted threads / con denti alternati
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through holes- for thread cutting by hand and machine
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori passanti- per uso manuale e con macchina
€
6,206,206,203,653,853,653,954,105,206,409,00
10,3012,7018,2020,5024,2027,5038,5051,00
5,505,505,755,756,956,057,609,70
13,1014,7022,0025,3028,6032,00
48
M
M 2.5 x 0.45 44.5 9.5 2.80 2.24 80722M 2.6 x 0.45 44.5 9.5 2.90 2.24 80724M 3 x 0.5 48.0 11.0 3.15 2.50 80726M 4 x 0.7 53.0 13.0 4.00 3.15 80730M 5 x 0.8 58.0 16.0 5.00 4.00 80734M 6 x 1.0 66.0 19.0 6.30 5.00 80738M 8 x 1.25 72.0 22.0 8.00 6.30 80742M 10 x 1.5 80.0 24.0 10.00 8.00 80746M 12 x 1.75 89.0 29.0 9.00 7.10 80750M 14 x 2.0 95.0 30.0 11.20 9.00 80754M 16 x 2.0 102.0 32.0 12.50 10.00 80758M 18 x 2.5 110.0 37.0 14.00 11.20 80762M 20 x 2.5 112.0 37.0 14.00 11.20 80766M 22 x 2.5 118.0 38.0 16.00 12.50 80770M 24 x 3.0 130.0 45.0 18.00 14.00 80774M 27 x 3.0 135.0 45.0 20.00 16.00 80776M 30 x 3.5 138.0 48.0 20.00 16.00 80778
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Machine Tapsmetric ISO-thread DIN 13
Maschi a macchina cortifilettatura metrica ISO DIN 13
ISO 529 Form C/35°RSP HSS-G Tol. ISO2/6H
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori ciechi - per uso manuale e con macchina
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through holes- for thread cutting by hand and machine
€
7,907,904,754,754,754,855,757,409,60
13,1014,7022,0025,3028,6032,0046,5060,50
49
Mf
M 6 x 0.75 50 14 6.0 4.9 66318M 8 x 0.75 50 19 6.0 4.9 66324M 8 x 1.0 56 22 6.0 4.9 66326M 9 x 0.75 56 19 7.0 5.5 66328M 9 x 1.0 63 20 7.0 5.5 66330M 10 x 0.75 63 20 7.0 5.5 66332M 10 x 1.0 63 20 7.0 5.5 66336M 10 x 1.25 70 24 7.0 5.5 66338M 12 x 1.0 70 22 9.0 7.0 66344M 12 x 1.25 70 22 9.0 7.0 66346M 12 x 1.5 70 22 9.0 7.0 66348M 13 x 1.0 70 22 11.0 9.0 66350M 13 x 1.5 70 22 11.0 9.0 66351M 14 x 1.0 70 22 11.0 9.0 66353M 14 x 1.25 70 22 11.0 9.0 66354M 14 x 1.5 70 22 11.0 9.0 66356M 15 x 1.5 70 22 12.0 9.0 66360M 16 x 1.5 70 22 12.0 9.0 66366M 18 x 1.0 80 22 14.0 11.0 66370M 18 x 1.5 80 22 14.0 11.0 66372M 20 x 1.5 80 22 16.0 12.0 66384M 20 x 2.0 80 22 16.0 12.0 66386M 22 x 1.5 80 22 18.0 14.5 66394M 22 x 2.0 80 22 18.0 14.5 66396M 24 x 1.5 90 22 18.0 14.5 66504M 24 x 2.0 90 22 18.0 14.5 66506M 25 x 1.5 90 22 18.0 14.5 66508M 26 x 1.5 90 22 18.0 14.5 66512M 27 x 1.5 90 22 20.0 16.0 66517M 28 x 1.5 90 22 20.0 16.0 66522M 30 x 1.5 90 22 22.0 18.0 66530M 30 x 2.0 90 22 22.0 18.0 66532M 32 x 1.5 90 22 22.0 18.0 66536
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Short Machine Tapsmetric-fine ISO-thread DIN 13
Maschi a macchina cortifilettatura metrica fine ISO DIN 13
DIN 2181 Form D HSS-G Tol. ISO2/6H
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori passanti- per uso manuale e con macchina
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through holes- for thread cutting by hand and machine
€
5,705,705,706,406,406,405,706,408,308,307,50
12,7012,7012,70
9,508,20
14,0010,0015,3011,5014,0019,2019,9019,9020,0026,7039,0039,0039,0046,0054,0054,0054,00
50
BSW
W
BSW 1/8 x 40 40 12 3.5 2.7 62306BSW 3/16 x 24 50 18 6.0 4.9 62310BSW 1/4 x 20 50 19 6.0 4.9 62314BSW 5/16 x 18 56 22 6.0 4.9 62316BSW 3/8 x 16 70 24 7.0 5.5 62318BSW 7/16 x 14 70 24 8.0 6.2 62320BSW 1/2 x 12 75 29 9.0 7.0 62322BSW 9/16 x 12 80 30 11.0 9.0 62324BSW 5/8 x 11 80 32 12.0 9.0 62326BSW 3/4 x 10 95 40 14.0 11.0 62330BSW 7/8 x 9 100 40 18.0 14.5 62334BSW 1" x 8 110 50 18.0 14.5 62338
W 19,8 x 14 90 32 16 12 62397W 28,8 x 14 100 40 20 16 62398W 31,3 x 14 110 40 22 18 62399
Short Machine TapsWhitworth-thread BS 84
Maschi a macchina cortifilettatura Whitworth BS 84
� DIN 352 Form D HSS-G
Nominal Diameter L 1 L 2 D 2 Art.-No.S
Nominal Diameter L 1 L 2 D 2 Art.-No.S
Short Machine Tapstapered Whitworth screw thread for gas cylinderstaper 3:25, DIN 477
Maschi a macchina cortifilettatura Whitworth conica per bombola di gascono 3:25, DIN 477
� DIN 352 Form C HSS-G
€
4,104,004,004,505,006,307,60
10,0011,2015,0020,0023,00
€
136,00152,00175,00
51
UNC / UNF
UNCUNC 1/4 x 20 50 19 6.0 4.9 63314UNC 5/16 x 18 56 22 6.0 4.9 63316UNC 3/8 x 16 70 24 7.0 5.5 63318UNC 7/16 x 14 70 24 8.0 6.2 63320UNC 1/2 x 13 75 29 9.0 7.0 63322UNC 9/16 x 12 80 30 11.0 9.0 63324UNC 5/8 x 11 80 32 12.0 9.0 63326UNC 3/4 x 10 95 40 14.0 11.0 63330UNC 7/8 x 9 100 40 18.0 14.5 63334UNC 1" x 8 110 50 18.0 14.5 63338
UNFUNF 1/4 x 28 50 18 6.0 4.9 64314UNF 5/16 x 24 56 22 6.0 4.9 64316UNF 3/8 x 24 63 22 7.0 5.5 64318UNF 7/16 x 20 63 22 8.0 6.2 64320UNF 1/2 x 20 75 24 9.0 7.0 64322UNF 9/16 x 18 80 28 11.0 9.0 64324UNF 5/8 x 18 80 28 12.0 9.0 64326UNF 3/4 x 16 95 32 14.0 11.0 64330UNF 7/8 x 14 100 36 18.0 14.5 64334UNF 1" x 12 110 40 18.0 14.5 64338
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
Short Machine TapsUnified Coarse and Fine thread ANSI B 1.1
Maschi macchina cortifilettatura unificata, serie grossa e fina ANSI B1.1
� DIN 352 Form D HSS-G Tol. 2B
Nominal Diameter L 1 L 2 D 2 Art.-No.S
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through holes- for thread cutting by hand and machine
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori passanti- per uso manuale e con macchina
4,004,505,006,307,60
10,0011,2015,0020,0023,00
€
4,004,505,006,307,60
10,0011,2015,0020,0023,00
52
G (BSP)
G 1/8 x 28 63 20 7 5.5 65312G 1/4 x 19 70 22 11 9.0 65314G 3/8 x 19 70 22 12 9.0 65316G 1/2 x 14 80 22 16 12.0 65318G 3/4 x 14 90 22 20 16.0 65322G 1" x 11 100 25 25 20.0 65326G 1.1/4 x 11 125 40 32 24.0 65334G 1.1/2 x 11 140 40 36 29.0 65342G 1.3/4 x 11 140 40 40 32.0 65350G 2" x 11 160 40 45 35.0 65354G 2.1/4 x 11 160 40 50 39.0 65358G 2.1/2 x 11 160 40 50 39.0 65362G 2.3/4 x 11 160 40 50 39.0 65366G 3" x 11 160 40 50 39.0 65370G 3.1/2 x 11 180 45 56 44.0 65374G 4" x 11 180 45 56 44.0 65378
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
Short Machine TapsPipe-thread DIN ISO 228
Maschi a macchina cortifilettatura per tubi gas DIN ISO 228
DIN 5157 Form D HSS-G
Nominal Diameter L 1 L 2 D 2 Art.-No.S
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through holes- for thread cutting by hand and machine
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori passanti- per uso manuale e con macchina
€
5,205,708,60
11,8017,2029,0050,5069,00
138,00138,00310,00399,00730,00850,00
1.340,001.670,00
53
Rc (BSPT)
PT 1/8 x 28 65 19.0 7.0 5.5 63712PT 1/4 x 19 70 25.0 11.0 9.0 63714PT 3/8 x 19 75 26.0 12.0 9.0 63716PT 1/2 x 14 80 31.0 16.0 12.0 63718PT 3/4 x 14 100 33.0 20.0 16.0 63722PT 1" x 11 110 38.0 25.0 20.0 63726
PT 1/16 x 28 55 17.5 8.0 6.0 97502PT 1/8 x 28 55 19.0 8.0 6.0 97506PT 1/4 x 19 62 28.0 11.0 9.0 97514PT 3/8 x 19 65 28.0 14.0 11.0 97518PT 1/2 x 14 80 35.0 18.0 14.0 97522PT 3/4 x 14 85 35.0 23.0 17.0 97530PT 1" x 11 95 45.0 26.0 21.0 97538PT 1.1/4 x 11 105 45.0 32.0 26.0 97546PT 1.1/2 x 11 110 45.0 38.0 29.0 97554PT 2" x 11 120 50.0 46.0 35.0 97570
PT 1/16 x 28 55 17.5 8.0 6.0 97702PT 1/8 x 28 55 19.0 8.0 6.0 97706PT 1/4 x 19 62 28.0 11.0 9.0 97714PT 3/8 x 19 65 28.0 14.0 11.0 97718PT 1/2 x 14 80 35.0 18.0 14.0 97722PT 3/4 x 14 85 35.0 23.0 17.0 97730PT 1" x 11 95 45.0 26.0 21.0 97738PT 1.1/4 x 11 105 45.0 32.0 26.0 97746PT 1.1/2 x 11 110 45.0 38.0 29.0 97754PT 2" x 11 120 50.0 46.0 35.0 97770
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
Short Machine Tapstapered pipe thread, taper 1:16, con. 55°
Maschi a macchina cortifilettatura conica per tubi, cono 1:16
HSS-G
Nominal Diameter L 1 L 2 D 2 Art.-No.S
Form C
Form B, Spiral Point / con imbocco corretto
Form C, 35° Spiral Flute / spirale destra a 35°,
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for thread cutting by hand and machineForm C: for through and blind holesSpiral Point: for through holesSpiral Flute: for blind holes
Applicazione: per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per uso manuale e con macchinaForma C: per fori passanti e ciechiForma B: per fori passanti35° RSP: per fori ciechi
€
7,508,70
13,8017,3025,4038,30
7,207,408,60
15,4022,0033,0048,5073,00
105,00175,00
7,507,809,00
16,0023,0034,5051,0076,50
110,00184,00
54
Rp (BSPP)
PS 1/16 x 28 55 19 6.5 5.0 95402PS 1/8 x 28 55 19 8.0 6.0 95406PS 1/4 x 19 62 28 11.0 9.0 95414PS 3/8 x 19 65 28 14.0 11.0 95418PS 1/2 x 14 80 35 18.0 14.0 95422PS 3/4 x 14 85 35 23.0 17.0 95430PS 1" x 11 95 45 26.0 21.0 95438PS 1.1/4 x 11 105 45 32.0 26.0 95446PS 1.1/2 x 11 110 45 38.0 29.0 95454PS 2" x 11 120 50 46.0 35.0 95470
PS 1/16 x 28 55 19 6.5 5.0 95702PS 1/8 x 28 55 19 8.0 6.0 95706PS 1/4 x 19 62 28 11.0 9.0 95714PS 3/8 x 19 65 28 14.0 11.0 95718PS 1/2 x 14 80 35 18.0 14.0 95722PS 3/4 x 14 85 35 23.0 17.0 95730PS 1" x 11 95 45 26.0 21.0 95738PS 1.1/4 x 11 105 45 32.0 26.0 95746PS 1.1/2 x 11 110 45 38.0 29.0 95754PS 2" x 11 120 50 46.0 35.0 95770
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
Nominal Diameter L 1 L 2 D 2 Art.-No.S
Form C
Form C, 35° Spiral Flute / spirale destra a 35°
Short Machine TapsPipe-thread ISO 7-1 (DIN EN 10226-1)
Maschi a macchina cortifilettatura cilindrica per tubi ISO 7-1 (DIN EN 10226-1)
HSS-G
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for thread cutting by hand and machineForm C: for through and blind holesSpiral Flute: for blind holes
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per uso manuale e con macchinaForma C: per fori passanti e ciechi35° RSP: per fori ciechi
€
6,306,307,60
12,0019,2033,2040,8061,7085,70
120,00
6,906,908,00
13,0021,0030,0045,0067,5094,00
130,00
55
PG
PG 7 x 20 70 22 9.0 7.0 65707PG 9 x 18 70 22 12.0 9.0 65709PG 11 x 18 80 22 14.0 11.0 65711PG 13.5 x 18 80 22 16.0 12.0 65713PG 16 x 18 80 22 18.0 14.5 65716PG 21 x 16 90 22 22.0 18.0 65721PG 29 x 16 100 25 28.0 22.0 65729PG 36 x 16 140 40 36.0 29.0 65736PG 42 x 16 140 40 40.0 32.0 65742PG 48 x 16 160 40 45.0 35.0 65748
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
Nominal Diameter L 1 L 2 D 2 Art.-No.S
Short Machine Tapsarmoured tube thread DIN 40 430
Maschi a macchina cortifilettatura per tubi corazzati DIN 40 430
DIN 40432 Form D HSS-G
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through holes- for thread cutting by hand and machine
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori passanti- per uso manuale e con macchina
€
10,0013,0022,0026,0031,5043,0071,00
113,00177,00210,00
56
NPT
NPT 1/16 x 27 65 19 7 5.5 63510NPT 1/8 x 27 65 19 7 5.5 63512NPT 1/4 x 18 70 25 11 9.0 63514NPT 3/8 x 18 75 26 12 9.0 63516NPT 1/2 x 14 80 31 16 12.0 63518NPT 3/4 x 14 100 33 20 16.0 63522NPT 1" x 11.5 110 38 25 20.0 63526NPT 1.1/4 x 11.5 125 41 32 24.0 63534NPT 1.1/2 x 11.5 140 42 36 29.0 63542NPT 2" x 11.5 160 44 36 29.0 63554
NPT 1/16 x 27 55 17.5 8.0 6.0 98502NPT 1/8 x 27 55 19.0 8.0 6.0 98506NPT 1/4 x 18 62 28.0 11.0 9.0 98514NPT 3/8 x 18 65 28.0 14.0 11.0 98518NPT 1/2 x 14 80 35.0 18.0 14.0 98522NPT 3/4 x 14 85 35.0 23.0 17.0 98530NPT 1" x 11.5 95 45.0 26.0 21.0 98538NPT 1.1/4 x 11.5 105 45.0 32.0 26.0 98546NPT 1.1/2 x 11.5 110 45.0 38.0 29.0 98554NPT 2" x 11.5 120 50.0 46.0 35.0 98570
NPT 1/16 x 27 55 17.5 8.0 6.0 98702NPT 1/8 x 27 55 19.0 8.0 6.0 98706NPT 1/4 x 18 62 28.0 11.0 9.0 98714NPT 3/8 x 18 65 28.0 14.0 11.0 98718NPT 1/2 x 14 80 35.0 18.0 14.0 98722NPT 3/4 x 14 85 35.0 23.0 17.0 98730NPT 1" x 11.5 95 45.0 26.0 21.0 98738NPT 1.1/4 x 11.5 105 45.0 32.0 26.0 98746NPT 1.1/2 x 11.5 110 45.0 38.0 29.0 98754NPT 2" x 11.5 120 50.0 46.0 35.0 98770
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
Short Machine Tapsamerican tapered pipe thread, taper 1:16
Maschi a macchina cortifilettatura americana conica per tubi, cono 1:16
HSS-G
Nominal Diameter L 1 L 2 D 2 Art.-No.S
Form C
Form B, Spiral Point / con imbocco corretto
Form C, 35° Spiral Flute / spirale destra a 35°
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for thread cutting by hand and machineForm C: for through and blind holesSpiral Point: for through holesSpiral Flute: for blind holes
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per uso manuale e con macchinaForma C: per fori passanti e ciechiForma B: per fori passanti35° RSP: per fori ciechi
€
15,0012,5014,0019,0024,0032,0050,0076,00
143,00176,00
18,3014,6016,5022,0027,5036,7058,8088,00
146,00183,00
19,2015,3017,3023,1028,9038,5061,7092,40
153,00192,00
57
NPT
NPT 1/8 x 27 65 19 7 5.5 63002NPT 1/4 x 18 70 25 11 9.0 63003NPT 3/8 x 18 75 26 12 9.0 63004NPT 1/2 x 14 80 31 16 12.0 63005NPT 3/4 x 14 100 33 20 16.0 63007NPT 1" x 11.5 110 38 25 20.0 63009NPT 1.1/4 x 11.5 125 41 32 24.0 63011NPT 1.1/2 x 11.5 140 42 36 29.0 63013
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
Short Machine Taps, Left Handamerican tapered pipe thread, taper 1:16
Maschi a macchina corti, filetto sinistrofilettatura americana conica per tubi, cono 1:16
Form C HSS-G
Nominal Diameter L 1 L 2 D 2 Art.-No.S
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per uso manuale e con macchinaForma C: per fori passanti e ciechi
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for thread cutting by hand and machineForm C: for through and blind holes
€
19,0020,5029,0036,0047,0076,00
114,00215,00
58
NPTF
NPTF 1/8 x 27 55 19 8.0 6.0 98772NPTF 1/4 x 18 62 28 11.0 9.0 98774NPTF 3/8 x 18 65 28 14.0 11.0 98776NPTF 1/2 x 14 80 35 18.0 14.0 98778NPTF 3/4 x 14 85 35 23.0 17.0 98780NPTF 1" x 11.5 95 45 26.0 21.0 98782
NPTF 1/16 x 27 55 19 6.5 5.0 98571NPTF 1/8 x 27 55 19 8.0 6.0 98572NPTF 1/4 x 18 62 28 11.0 9.0 98574NPTF 3/8 x 18 65 28 14.0 11.0 98576NPTF 1/2 x 14 80 35 18.0 14.0 98578NPTF 3/4 x 14 85 35 23.0 17.0 98580NPTF 1" x 11.5 95 45 26.0 21.0 98582NPTF 1.1/4 x 11.5 105 45 32.0 26.0 98584NPTF 1.1/2 x 11.5 110 45 38.0 29.0 98586NPTF 2" x 11.5 120 50 46.0 35.0 98588
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
Short Machine Tapsamerican tapered pipe thread, taper 1:16
Maschi a macchina cortifilettatura americana conica per tubi, cono 1:16
HSS-E
Nominal Diameter L 1 L 2 D 2 Art.-No.S
Form B, Spiral Point / con imbocco corretto
Form C, 35° Spiral Flute / spirale destra a 35°
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per uso manuale e con macchinaForma B: per fori passanti35° RSP: per fori ciechi
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for thread cutting by hand and machineSpiral Point: for through holesSpiral Flute: for blind holes
€
18,3014,6016,5022,0027,5036,7059,0088,00
146,00183,00
15,3017,3023,1028,9028,5061,70
59
NPS
NPS 1/16 x 27 54 17.5 8.0 6.0 99702NPS 1/8 x 27 55 19.0 8.0 6.0 99706NPS 1/4 x 18 62 28.0 11.0 9.0 99714NPS 3/8 x 18 65 28.0 14.0 11.0 99718NPS 1/2 x 14 80 35.0 18.0 14.0 99722NPS 3/4 x 14 85 35.0 23.0 17.0 99730NPS 1" x 11.5 95 45.0 26.0 21.0 99738NPS 1.1/4 x 11.5 105 45.0 32.0 26.0 99746NPS 1.1/2 x 11.5 110 45.0 38.0 29.0 99754NPS 2" x 11.5 120 50.0 46.0 35.0 99770
NPS 1/16 x 27 54 17.5 8.0 6.0 99402NPS 1/8 x 27 55 19.0 8.0 6.0 99406NPS 1/4 x 18 62 28.0 11.0 9.0 99414NPS 3/8 x 18 65 28.0 14.0 11.0 99418NPS 1/2 x 14 80 35.0 18.0 14.0 99422NPS 3/4 x 14 85 35.0 23.0 17.0 99430NPS 1" x 11.5 95 45.0 26.0 21.0 99438NPS 1.1/4 x 11.5 105 45.0 32.0 26.0 99446NPS 1.1/2 x 11.5 110 45.0 38.0 29.0 99454NPS 2" x 11.5 120 50.0 46.0 35.0 99470
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
Short Machine Tapsamerican tapered pipe thread
Maschi a macchina cortifilettatura americana cilindrica per tubi
HSS-E
Nominal Diameter L 1 L 2 D 2 Art.-No.S
Form C
Form C, 35° Spiral Flute / spirale destra a 35°
Application:
for general - non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for thread cutting by hand and machineForm C: for through and blind holesSpiral Flute: for blind holes
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per uso manuale e con macchinaForma C: per fori passanti e ciechi35° RSP: per fori ciechi
€
15,4013,2014,9018,7023,1030,5048,6073,00
155,00250,00
17,2015,0016,5021,0027,5034,5059,0089,00
177,00275,00
HEX TAP DS
Benefit:- Pilot for exact alignment- Rougher and Finisher combined in one tool- Use in awkward places- For making new threads- For cleaning and repairing damaged threads
Vantaggi- Imbocco corretto per un perfetto centraggio- Sgrossatore e finitore in un unico utensile- Impiego in luoghi di difficile accesso- per la realizzazione di un nuovo filetto- Per la riparazione di filetti danneggiati
61
because available because reliable because you
61
M Mf UNC/UNF BSW G(BSP)
63 64 - 67 68
69 70
71
71-72
72
73 73
BIT EDITIONEDIZIONE BIT
HexTap
Combined BitsMaschi combinati
TriBit2
Drill BitsPunte elicoidale con attacco esagonale 1/4”
Countersink BitsFrese per svasare con attacco esagonale 1/4
Combined Machine TapMaschi combinati con punte
62
M 3 M 4 M 5 M 6 M 8 M 10
2,5 mm 3,3 mm 4,2 mm 5,0 mm 6,8 mm 8,5 mm
HexTap SInformazioni tecniche:
I maschi corti tipo bits Völkel sono concepiti per uso con avvitatori a batteria e trapani elettrici a mano con rotazione destra e sinistra, ma possono anche essere utilizzati per la filettatura a mano o con trapani a colonna.Adatti per uso con avvitatori a batteria con tensione minima pari a 7,5 V. Necessari per un buon utilizzo sono il corretto centraggio del maschio con il foro e l’impiego di un adeguato olio da taglio.Per la maschiatura con avvitatori a batteria e trapani elettrici a mano possono essere impiegati i seguenti parametri tecnici:
HexTap STechnical Information:
VÖLKEL-Threading-Bits have been designed for thread cutting using battery-powered screwdriver drills and electric hand drills with right-hand and left-hand rotation. But they are also suitable for thread cutting by hand or in a stationary drilling machine. Your battery-powered screwdriver drill should have a minimum power of 7.5 Volts. Take care that the tool and the axis of the hole are exactly aligned and use a suitable cutting oil.
The following technical data apply for thread cutting using battery-powered screwdriver drills and electric hand drills:
HexTap DSApplicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- Fori passanti e ciechi- Uso manuale
HexTap DSApplication:
for general use- non abrasive material up to 900 N/mm²- unalloyed and low alloyed steel- for through and blind holes- for thread cutting by hand
Sgrossatore con guida
Rougher piloted
esagono interno per criccheti o chiavi per viti
Hexagon Hole for Ratchet or Hexagon Keys
VantaggiImbocco corretto per un perfetto centraggioSgrossatore e finitore in un unico utensileImpiego in luoghi di difficile accessoper la realizzazione di un nuovo filettoPer la riparazione di filetti danneggiati
Benefit:Pilot for exact alignmentRougher and Finisher combined in one toolUse in awkward placesFor making new threadsFor cleaning and repairing damaged threads
finitoreFinisher/Bottoming
esagono esterno per chiavi aforchetta
External Hexagon for Open-End Wrench
Dimensions/Dimensione
Core hole dia./Diametro del Preforo Ø
RPM/ Giri/min Lowest setting (0 - 450 RPM)/minima regolazione
Torque/Valore di serraggio Maximum setting/massima regolazione
63
M
M
M 3 S 33.0 11 1/4" 67026M 3.5 S 33.5 10 1/4" 67028M 4 S 35.0 12 1/4" 67030M 4.5 S 35.0 12 1/4" 67032M 5 S 36.0 15 1/4" 67034M 5.5 S 35.0 15 1/4" 67036M 6 S 39.0 18 1/4" 67038M 7 S 37.5 16 1/4" 67040M 8 S 40.0 19 1/4" 67042M 9 S 40.5 18 1/4" 67044M 10 S 41.0 21 1/4" 67046
M 11 DS 70 22 8 4 67048M 12 DS 70 22 8 4 67050M 14 DS 70 22 10 4 67051M 16 DS 70 22 10 4 67052M 18 DS 80 24 13 5 67053M 20 DS 80 24 13 6 67054M 22 DS 80 24 15 6 67055M 24 DS 90 27 15 8 67056M 27 DS 90 27 19 8 67057M 30 DS 90 27 19 10 67058M 33 DS 100 29 24 10 67059M 36 DS 100 29 24 10 67060M 39 DS 110 32 27 12 67061M 42 DS 110 27 27 12 67062M 45 DS 110 27 32 17 67063M 48 DS 140 42 32 17 67064M 52 DS 140 42 36 19 67065
HexTap SThreading-Bit, 1/4" Hexagon Shankmetric ISO-thread DIN 13
HexTap Smaschi con attacco esagonale 1/4”filettatura metrica ISO DIN 13
HSS-G Tol. ISO2/6H
HexTap DSDouble Ended Tap, Multi-Drivemetric ISO-thread DIN 13
HexTap DSmaschi doppio, Multi-Drivefilettatura metrica ISO DIN 13
HSS-G Tol. ISO2/6H
Size Typ L 1 L 2 SW1 Art.-No.
Size Typ L 1 L 2 SW1 SW2 Art.-No.
€
3,304,403,304,404,105,004,105,005,908,306,90
€
14,5014,5016,5019,0021,0023,0029,0034,0053,0066,4088,00
106,00137,00155,00188,00266,00266,00
64
Mf
M 3 x 0.35 S 33.0 11 1/4" 67700M 3.5 x 0.35 S 33.5 10 1/4" 67701M 4 x 0.35 S 35.0 12 1/4" 67702M 4 x 0.5 S 35.0 12 1/4" 67703M 4.5 x 0.5 S 35.0 12 1/4" 67704M 5 x 0.5 S 36.0 15 1/4" 67705M 5 x 0.75 S 36.0 15 1/4" 67706M 5.5 x 0.5 S 35.0 15 1/4" 67707M 6 x 0.5 S 39.0 18 1/4" 67708M 6 x 0.75 S 39.0 18 1/4" 67709M 7 x 0.5 S 37.5 16 1/4" 67710M 7 x 0.75 S 37.5 16 1/4" 67711M 8 x 0.5 S 40.0 19 1/4" 67712M 8 x 0.75 S 40.0 19 1/4" 67713M 8 x 1.0 S 40.0 19 1/4" 67714M 9 x 0.5 S 40.5 18 1/4" 67715M 9 x 0.75 S 40.5 18 1/4" 67716M 9 x 1.0 S 40.5 18 1/4" 67717M 10 x 0.5 S 41.0 21 1/4" 67718M 10 x 0.75 S 41.0 21 1/4" 67719M 10 x 1.0 S 41.0 21 1/4" 67720M 10 x 1.25 S 41.0 21 1/4" 67721
HexTap SThreading-Bit, 1/4" Hexagon Shankmetric-fine ISO-thread DIN 13
HexTap Smaschi con attacco esagonale 1/4”filettatura metrica fine ISO DIN 13
HSS-G Tol. ISO2/6H
Size Typ L 1 L 2 SW1 Art.-No. €
4,404,404,404,405,005,005,005,005,005,006,606,606,606,606,608,308,308,308,308,308,308,30
65
Mf
M 11 x 0,75 DS 70 22 8 4 67722M 11 x 1.0 DS 70 22 8 4 67723M 11 x 1.25 DS 70 22 8 4 67724M 12 x 0.5 DS 70 22 8 4 67725M 12 x 0.75 DS 70 22 8 4 67726M 12 x 1 DS 70 22 8 4 67727M 12 x 1.25 DS 70 22 8 4 67728M 12 x 1.5 DS 70 22 8 4 67729M 13 x 0.5 DS 70 22 10 4 67730M 13 x 0.75 DS 70 22 10 4 67731M 13 x 1.0 DS 70 22 10 4 67732M 13 x 1.5 DS 70 22 8 4 67733M 14 x 0.5 DS 70 22 10 4 67734M 14 x 0.75 DS 70 22 10 4 67735M 14 x 1.0 DS 70 22 10 4 67736M 14 x 1.25 DS 70 22 10 4 67737M 14 x 1.5 DS 70 22 10 4 67738M 15 x 0.75 DS 70 22 12 4 67739M 15 x 1.0 DS 70 22 12 4 67740M 15 x 1.5 DS 70 22 10 4 67741M 16 x 0.5 DS 70 22 12 4 67742M 16 x 0.75 DS 70 22 12 4 67743M 16 x 1 DS 70 22 12 4 67744M 16 x 1.25 DS 70 22 12 4 67745M 16 x 1.5 DS 70 22 12 4 67746M 17 x 1.0 DS 80 24 13 5 67747M 17 x 1.5 DS 80 24 13 5 67748M 18 x 0.5 DS 80 24 13 5 67749M 18 x 0.75 DS 80 24 13 5 67750M 18 x 1.0 DS 80 24 13 5 67751M 18 x 1,25 DS 80 24 13 5 67752M 18 x 1.5 DS 80 24 13 5 67753M 18 x 2.0 DS 80 24 13 5 67754M 19 x 1.0 DS 80 24 15 6 67755M 19 x 1.5 DS 80 24 15 6 67756M 20 x 0.5 DS 80 24 15 6 67757M 20 x 0.75 DS 80 24 15 6 67758M 20 x 1.0 DS 80 24 15 6 67759M 20 x 1.25 DS 80 24 15 6 67760M 20 x 1.5 DS 80 24 15 6 67761M 20 x 2.0 DS 80 24 15 6 67762M 21 x 1.0 DS 80 24 15 6 67763M 21 x 1.5 DS 80 24 15 6 67764M 22 x 0.5 DS 80 24 17 6 67765M 22 x 0.75 DS 80 24 17 6 67766M 22 x 1.0 DS 80 24 17 6 67767M 22 x 1.25 DS 80 24 17 6 67768M 22 x 1.5 DS 80 24 17 6 67769M 22 x 2.0 DS 80 24 17 6 67770
HexTap DSDouble Ended Tap, Multi-Drivemetric-fine ISO-thread DIN 13
HexTap DSmaschi doppio, Multi-Drivefilettatura metrica fine ISO DIN 13
HSS-G Tol. ISO2/6H
Size Typ L 1 L 4 SW1 SW2 Art.-No. €
15,8015,8015,8015,8015,8015,8015,8014,6024,2024,2024,2024,2024,2024,2024,2018,4015,8027,0027,0027,0027,0027,0027,0027,0019,4029,2029,2029,2029,2029,2029,2022,0029,2036,6036,6036,6036,6036,6036,6027,0036,6038,0038,0038,0038,0038,0038,0038,0038,00
66
M 23 x 1.0 DS 80 24 17 6 67771M 23 x 1.5 DS 80 24 17 6 67772M 24 x 0.5 DS 80 24 19 8 67773M 24 x 0,75 DS 80 24 19 8 67774M 24 x 1.0 DS 80 24 19 8 67775M 24 x 1,25 DS 80 24 19 8 67776M 24 x 1.5 DS 90 27 19 8 67777M 24 x 2.0 DS 90 27 17 8 67778M 25 x 1.0 DS 90 27 19 8 67779M 25 x 1.5 DS 90 27 19 8 67780M 26 x 1.0 DS 90 27 19 8 67781M 26 x 1.5 DS 90 27 19 8 67782M 26 x 2.0 DS 90 27 19 8 67783M 27 x 1.0 DS 90 27 19 8 67784M 27 x 1.5 DS 90 27 19 8 67785M 27 x 2.0 DS 90 27 19 8 67786M 28 x 1.0 DS 90 27 19 8 67787M 28 x 1.5 DS 90 27 19 8 67788M 28 x 2.0 DS 90 27 19 8 67789M 29 x 1.5 DS 90 27 19 8 67790M 30 x 1.0 DS 90 27 24 10 67791M 30 x 1.5 DS 90 27 24 10 67792M 30 x 2.0 DS 90 27 24 10 67793M 30 x 2.5 DS 90 27 22 10 67794M 30 x 3.0 DS 90 27 22 10 67795M 32 x 1.0 DS 90 27 24 10 67796M 32 x 1.5 DS 90 27 24 10 67797M 32 x 2.0 DS 90 27 24 10 67798M 32 x 3.0 DS 90 27 24 10 67799M 33 x 1.5 DS 100 29 24 10 67800M 33 x 2.0 DS 100 29 24 10 67801M 33 x 3.0 DS 100 29 24 10 67802M 34 x 1.0 DS 100 29 27 10 67803M 34 x 1.5 DS 100 29 27 10 67804M 34 x 2.0 DS 100 29 27 10 67805M 35 x 1.0 DS 100 29 27 10 67806M 35 x 1.5 DS 100 29 27 10 67807M 35 x 2.0 DS 100 29 27 10 67808M 36 x 1.0 DS 100 29 27 10 67809M 36 x 1.5 DS 100 29 27 10 67810M 36 x 2.0 DS 100 29 27 10 67811M 36 x 3.0 DS 100 29 27 10 67812M 37 x 1.5 DS 100 29 27 10 67813M 38 x 1.0 DS 110 32 27 12 67814M 38 x 1.5 DS 110 32 27 12 67815M 38 x 2.0 DS 110 32 27 12 67816M 38 x 3.0 DS 110 32 27 12 67817M 39 x 1.5 DS 110 32 32 12 67818M 39 x 2.0 DS 110 32 27 12 67819
Mf
HexTap DSDouble Ended Tap, Multi-Drivemetric-fine ISO-thread DIN 13
HexTap DSmaschi doppio, Multi-Drivefilettatura metrica fine ISO DIN 13
HSS-G Tol. ISO2/6H
Size Typ L 1 L 4 SW1 SW2 Art.-No. €
51,0051,0051,0051,0051,0051,0038,6051,0075,0075,0075,0075,0075,0075,0075,0088,0088,0088,0088,0088,00
104,00104,00104,00104,00104,00104,00104,00104,00104,00104,00126,00126,00126,00126,00126,00126,00126,00126,00133,00133,00133,00133,00164,00164,00164,00164,00164,00164,00164,00
67
M 39 x 3.0 DS 110 32 27 12 67820M 40 x 1.0 DS 110 32 32 12 67821M 40 x 1.5 DS 110 32 32 12 67822M 40 x 2.0 DS 110 32 32 12 67823M 40 x 3.0 DS 110 32 27 12 67824M 42 x 1.0 DS 110 32 32 12 67825M 42 x 1.5 DS 110 27 32 12 67828M 42 x 2.0 DS 110 27 32 12 67826M 42 x 3.0 DS 110 27 32 12 67827M 44 x 1.5 DS 110 27 36 12 67829M 44 x 2.0 DS 110 27 36 12 67830M 45 x 1.0 DS 110 27 36 17 67831M 45 x 1.5 DS 110 27 36 17 67832M 45 x 2.0 DS 110 27 36 17 67833M 45 x 3.0 DS 110 27 36 17 67834M 46 x 1.5 DS 110 27 36 17 67835M 48 x 1.0 DS 140 45 36 17 67836M 48 x 1.5 DS 140 45 36 17 67837M 48 x 2.0 DS 140 45 36 17 67838M 48 x 3.0 DS 140 45 36 17 67839M 50 x 1.5 DS 140 42 41 17 67840M 50 x 2.0 DS 140 42 41 17 67841M 50 x 3.0 DS 140 42 36 17 67842M 52 x 1.5 DS 140 42 41 19 67843M 52 x 2.0 DS 140 42 41 19 67844M 52 x 3.0 DS 140 42 41 19 67845M 63 x 1.5 DS 160 47 50 19 67846
Mf
HexTap DSDouble Ended Tap, Multi-Drivemetric-fine ISO-thread DIN 13
HexTap DSmaschi doppio, Multi-Drivefilettatura metrica fine ISO DIN 13
HSS-G Tol. ISO2/6H
Size Typ L 1 L 4 SW1 SW2 Art.-No. €
164,00164,00164,00164,00164,00164,00172,00172,00164,00194,00194,00194,00194,00194,00194,00194,00232,00232,00232,00232,00254,00254,00254,00304,00304,00304,00498,00
68
G (BSP)
G (BSP)
G 1/4 DS 70 22 8 4 67871G 3/8 DS 70 22 12 4 67872G 1/2 DS 80 24 15 6 67873G 3/4 DS 90 27 19 8 67874G 1" DS 100 29 24 10 67875G 1.1/4 DS 110 27 32 12 67876G 1.1/2 DS 140 42 36 17 67877G 2" DS 160 47 41 19 67878
G 1/8 S 40,5 17 1/4" 67870
HexTap SThreading-Bit, 1/4" Hexagon ShankPipe-thread DIN ISO 228
HexTap Smaschi con attacco esagonale 1/4”filettatura per tubi gas DIN ISO 228
HSS-G
HexTap DSDouble Ended Tap, Multi-DrivePipe-thread DIN ISO 228
HexTap DSmaschi doppio, Multi-Drivefilettatura per tubi gas DIN ISO 228
HSS-G
Size Typ L 1 L 2 SW1 Art.-No.
Size Typ L 1 L 4 SW1 SW2 Art.-No. €
12,6017,2023,1034,7058,80
102,00135,00270,00
€
7,00
69
M 3 M 4 M 5 M 6 M 8 M 10
2,5 mm 3,3 mm 4,2 mm 5,0 mm 6,8 mm 8,5 mm
1600 UpM 1200 UpM 950 UpM 800 UpM 600 UpM 450 UpM
M
M 3 x 0.5 2.5 36 1/4" 67226M 4 x 0.7 3.3 39 1/4" 67230M 5 x 0.8 4.2 41 1/4" 67234M 6 x 1.0 5.0 44 1/4" 67238M 8 x 1.25 6.8 50 1/4" 67242M 10 x 1.5 8.5 59 1/4" 67246
TINM 3 x 0.5 2.5 36 1/4" 67210M 4 x 0.7 3.3 39 1/4" 67211M 5 x 0.8 4.2 41 1/4" 67212M 6 x 1.0 5.0 44 1/4" 67213M 8 x 1.25 6.8 50 1/4" 67214M 10 x 1.5 8.5 59 1/4" 67215
Combined Bitsfor Drilling, Tapping and Deburring in one operationwith 1/4" Hexagon Drive (Bit)
Maschi a macchina combinatiper forare, maschiare e svasare velocemente in un’unica operazionecon attacco esagonale 1/4”
HSS-G Tol. ISO2/6H
Technical Information:VÖLKEL-Combined-Bits have been designed for drill-ing, tapping and deburring in one operation using battery-powered screwdriver drills and electric hand drills with right-hand and left-hand rotation, but they are also suitable for thread cutting in a stationary drilling machine. The Combined Bit is suitable for universal use in materials of medium mechanical strength, non ferrous metals and thermoplastics (up to 600 N/mm2 tensile strength). It is possible with this tool to produce through threads up to a maximum threaded depth of 1 x D. They are especially useful for mounting and small batch production. Take care that the tool and the axis of the hole are exactly aligned and use a suitable cutting oil.The following technical data apply for using battery-powered screwdriver and electric hand drills:
Informazioni tecniche:I bits combinati Völkel sono concepiti per uso con trapani a batteria e a mano a rotazione destra e sinistra, ma sono adatti anche per un uso con trapani a colonna. Questi utensili sono utilizzati per la lavorazione dell’acciaio, metalli non ferrosi e plastiche (fino a 600 Nm2 di resist-enza). Adatti per la maschiatura di fori passanti con una profondità massima di 1xD. Sono particolarmente utilizzati nei lavori di montaggio e nella produzione di piccole serie. Necessari per un buon utilizzo sono il corretto centraggio del maschio con il foro e l’impiego di un adeguato olio da taglio. Per la maschiatura con trapani a batteria e a mano possono essere impiegati i seguenti parametri tecnici:
Nominal Diametet D 1 L 1 Art.-No.D
Dimensions/Dimensione
Core hole dia./Diametro del Preforo Ømax. RPM/Max n° giri (UpMgiri/m)
€
6,40 6,40 6,40 6,40 8,8010,60
11,9011,9011,9011,9016,0022,00
70
UNC / UNF
UNCUNC Nr. 4 x 40 2.3 36 1/4" 67280UNC Nr. 5 x 40 2.6 36 1/4" 67281UNC Nr. 6 x 32 2.85 39 1/4" 67282UNC Nr. 8 x 32 3.5 39 1/4" 67283UNC Nr. 10 x 24 3.9 41 1/4" 67284UNC Nr. 12 x 24 4.5 41 1/4" 67285UNC 1/4 x 20 5.2 44 1/4" 67286UNC 5/16 x 18 6.6 50 1/4" 67287UNC 3/8 x 16 8.0 59 1/4" 67288
UNFUNF Nr. 4 x 48 2.4 36 1/4" 67290UNF Nr. 5 x 44 2.7 36 1/4" 67291UNF Nr. 6 x 40 3.0 39 1/4" 67292UNF Nr. 8 x 36 3.5 39 1/4" 67293UNF Nr. 10 x 32 4.1 41 1/4" 67294UNF Nr. 12 x 28 4.7 41 1/4" 67295UNF 1/4 x 28 5.5 44 1/4" 67296UNF 5/16 x 24 6.9 50 1/4" 67297UNF 3/8 x 24 8.5 59 1/4" 67298
Combined Bitsfor Drilling, Tapping andDeburring in one operationwith 1/4" Hexagon Drive (Bit)
Maschi a macchina combinatiper forare, maschiare e svasare velocemente in un’unica operazionecon attacco esagonale 1/4”
HSS-G
Nominal Diameter D 1 L 1 Art.-No.D
€
8,208,208,208,208,208,208,20
11,5013,90
8,208,208,208,208,208,208,20
11,5013,90
71
M
M 3 x 0.5 2.5 mm 6.3 mm M 3 M 3 67403M 4 x 0.7 3.3 mm 8.3 mm M 4 M 4 67404M 5 x 0.8 4.2 mm 10.4 mm M 5 M 5 67405M 6 x 1.0 5.0 mm 12.4 mm M 6 M 6 67406M 8 x 1.25 6.8 mm 16.5 mm M 8 M 8 67408M 10 x 1.5 8.5 mm 20.5 mm M 10 M 10 67410
3.0 mm 38 16 1/4" 67630 4.0 mm 44 20 1/4" 67640 5.0 mm 50 26 1/4" 67650 6.0 mm 50 26 1/4" 67660 8.0 mm 51 32 1/4" 6768010.0 mm 54 38 1/4" 67698
TriBit²One Box for all occasionsDrilling, Tapping, DeburringCombined and specific tools
TriBit²una cassetta in ogni caso foratura, filettare, sbarbare utensili combinato e speciale
HSS-G Tol. ISO2/6H
Nominal Diameter Art.-No.D
Wood Drill Bits with 1/4" Hexagon Drive
Punte per legnacon attacco esagonale 1/4”
HSS-G
Nominal Diameter L 1 S 2 Art.-No.D
€
20,9020,9022,0022,5028,5033,00
€
3,103,103,103,203,754,85
72
M
1.0 mm 32 7 1/4" 671101.5 mm 32 10 1/4" 671152.0 mm 34 12 1/4" 671202.5 mm (M3) 36 14 1/4" 671253.0 mm 38 16 1/4" 671303.3 mm (M4) 40 18 1/4" 671333.5 mm 40 18 1/4" 671354.0 mm 44 20 1/4" 671404.2 mm (M5) 45 20 1/4" 671424.5 mm 46 24 1/4" 671455.0 mm (M6) 50 26 1/4" 671505.5 mm 50 26 1/4" 671556.0 mm 50 26 1/4" 671606.5 mm 50 30 1/4" 671656.8 mm (M8) 50 30 1/4" 671687.0 mm 50 30 1/4" 671707.5 mm 51 32 1/4" 671758.0 mm 51 32 1/4" 671808.5 mm (M10) 53 33 1/4" 671859.0 mm 53 33 1/4" 671909.5 mm 54 38 1/4" 67195
10.0 mm 54 38 1/4" 6719810.2 mm (M12) 54 38 1/4" 67199
6.3 mm 31 1/4" 673068.3 mm 31 1/4" 67308
10.4 mm 34 1/4" 6731012.4 mm 35 1/4" 6731216.5 mm 40 1/4" 6731620.5 mm 41 1/4" 67320
Drill Bitswith 1/4" Hexagon Drive
Punte elicoidale con attacco esagonale 1/4”
HSS-G
Countersink Bits90° - 3 Fluteswith 1/4" Hexagon Drive
Frese per svasare 90° - 3 taglienticon attacco esagonale ¼”
HSS
Nominal Diameter L 1 S 2 Art.-No.D
Nominal Diameter L 1 Art.-No.D
€
3,103,103,103,103,103,103,103,103,103,103,103,203,203,203,203,203,753,754,304,304,854,854,85
€
8,108,108,709,20
10,5011,50
73
MM 3 x 0.5 56 16 11 2.5 3.0 2.4 37026 M 4 x 0.7 63 18 14 3.3 4.0 3.0 37030 M 5 x 0.8 71 20 18 4.2 5.0 3.8 37034M 6 x 1.0 80 22 22 5.0 6.0 4.9 37038 M 8 x 1.25 95 26 25 6.8 8.0 6.2 37042M 10 x 1.5 106 30 31 8.5 10.0 8.0 37046 M 12 x 1.75 115 32 35 10.2 12.0 9.0 37050
SETM 3 - 12 M 3-4-5-6-8-10-12 47837
BSWBSW 1/8 x 40 56 16 11 2.6 3.0 2.4 70006BSW 5/32 x 32 63 18 14 3.2 4.0 3.0 70008 BSW 3/16 x 24 71 20 18 3.7 5.0 3.8 70010 BSW 1/4 x 20 80 22 22 5.1 6.0 4.9 70014 BSW 5/16 x 18 95 26 25 6.5 8.0 6.2 70016 BSW 3/8 x 16 106 30 31 7.9 10.0 8.0 70018 BSW 1/2 x 12 115 32 35 10.5 12.0 9.0 70022
SETBSW 1/8 - 1/2 BSW 1/8-5/32-3/16-1/4-5/16-3/8-1/2 47870
Combined Machine Tapmetric ISO-thread DIN 13
Maschi combinati con puntefilettatura metrica ISO DIN 13
HSS-E Tol. ISO2/6H
Application:
The Combined Tap enables the user to produce the tap-ping drill hole and the through thread in one operation without any tool changing. The tool incorporates a twist drill before the thread-tapping part. It is possible with this tool to produce through threads up to a maximum threaded depth of 2 x D.The Combined Tap is suitable for universal use in materi-als of medium mechanical strenght: non-alloyed and alloyed steel sorts up to 600 N/mm2, malleable cast iron, nodulized graphite cast iron, cop-per, brass, aluminium, aluminium-magnesium and zinc alloys, red bronze, electron metal, pressure-cast zinc.It is sensible to use this tool on machines possesing an RPM switchover facility for drilling and tapping. The feed rate must be adapted to the particular operation required - drilling or tapping. Tapping chucks with pressure compensation may not be used.
Applicazioni:
Combinazione di maschio con punta per forare e maschia-re velocemente in un’unica operazione, senza cambiare l’utensile. Una punta elicoidale precede il maschio.Possono essere realizzati unicamente filetti per fori passan-ti con profondità massima pari a 2xD. I maschi combinati possono essere utilizzati per uso universale su materiali di media resistenza: acciai legati e non legati fino a 600 N/mm2, ghisa, ghisa sferoidale, rame, ottone, alluminio, leghe di alluminio e magnesio, leghe di zinco, ghisa rossa, elektron e ghisa pressofusa allo zinco.La velocità di taglio e l’avanzamento dovranno essere adattati secondo l’operazione svolta, foratura o maschiatu-ra. Pertanto questi utensili vanno impiegati su macchine a velocità variabile con possibilità di regolazione dei numeri di giri. Non utilizzare con mandrini a compensazione di pressione.
Nominal Diameter L 1 S 1 L 2 D 1 D 2 Art.-No.D
€
15,4015,4015,4017,1019,6021,5025,30
126,50
16,50 16,50 16,50 18,70 20,90 23,00 27,00
127,00
7474
MACHINE TAPS HSS-EMASCHI A MACCHINA HSS-E
Through holeper fori passanti
Form A6-8 Threads LeadImbocco a 6-8 spire
Form B4-5 Threads Lead with Spiral PointImbocco a 4-5 spire con imbocco corretto
Form B-AZ4-5 Threads Lead, Spiral Point with interrupted threadsImbocco a 4-5 spire con imbocco corretto e denti alternati per fori passanti
Form C 2-3 Threads LeadImbocco a 2-3 spire
Form C/RSP2-3 Threads Lead, 35° Spiral FluteImbocco a 2-3 spire spirale destra a 35°
Blind holeper fori ciechi
75
because available because reliable because you
75
Form A Form C Form B 15° RSP 35° RSP B-AZ TwinBox
78 79 80 84 82 85 77
86 87
88 90
119 120 121
92 93 96
122 125
99 100
101 102
103 104
105 106
107 108
109
110 111 112
128
113
114
115
116
117
118
MACHINE TAPS HSS-EMASCHI A MACCHINA HSS-E
M
M - extra long
M - 6G - 7G - +0,1 - 4H
M - LH
Mf
Mf - LH
BSW
UNC
UNF
8 - UN / 12 - UN
UNEF
UN / UNS
G (BSP)
G (BSP) - LH
Rc (BSPT)
NPT
Rd
FG
BSC
Vg
76
373/383 374/384 375/385 376/386 377/387 379/389394 395 397
705/715 707/717745/755 747/757765/775 767/777
784 785 787
A C B 15°RSP 35°RSP B-AZ
RECOMMENDED APPLICATION OF MACHINE TAPSAPPLICAZIONE RACCOMANDATA PER MASCHI A MACCHINA
Art.-No. MArt.-No. MfArt.-No. BSWArt.-No. UNCArt.-No. UNFArt.-No. G (BSP)
Form/Forma
Typ of hole/Tipo di fori
Material/Materiale
Structural Steel up to 500N/mm²Acciaio da costruzione a 500 N/mm²
Structural Steel over 500 N/mm²Acciaio da costruzione da 500 N/mm²
free-cutting Steel Acciaio automatici
Cementation Steel, heat treatable SteelAcciaio da cementazione, Acciai bonificato
Tool SteelAcciaio utensili
Stainless SteelAcciaio inossidabile
Cast SteelGhisa acciaiosa
Cast Iron, spheroidal graphite IronGhisa grigia / Ghisa sferoidale
Malleable Cast IronGhisa temprata
Brass, short-chippingOttone, truciolo corto
Brass, long-chippingOttone, truciolo lungo
BronzesBronzo
CopperRame
Al-alloys, short-chippingAlluminio, truciolo corto
Al-alloys, long-chippingAlluminio, truciolo lungo
Zinc AlloysLeghe forgiate
Magnesium AlloysLeghe di magnesio
ThermoplasticsMateriali plastici, materiali termoplastici
Thermosetting PlasticsMateriali plastici, materiali termodurenti
77
M
M 3 x 0.5 DIN 371 2.5 mm 37590M 4 x 0.7 DIN 371 3.3 mm 37591M 5 x 0.8 DIN 371 4.2 mm 37592M 6 x 1.0 DIN 371 5.0 mm 37593M 8 x 1.25 DIN 371 6.8 mm 37594M 10 x 1.5 DIN 371 8.5 mm 37595M 12 x 1.75 DIN 376 10.2 mm 38596M 14 x 2.0 DIN 376 12.0 mm 38597M 16 x 2.0 DIN 376 14.0 mm 38598
M 3 x 0.5 DIN 371 2.5 mm 37790M 4 x 0.7 DIN 371 3.3 mm 37791M 5 x 0.8 DIN 371 4.2 mm 37792M 6 x 1.0 DIN 371 5.0 mm 37793M 8 x 1.25 DIN 371 6.8 mm 37794M 10 x 1.5 DIN 371 8.5 mm 37795M 12 x 1.75 DIN 376 10.2 mm 38796M 14 x 2.0 DIN 376 12.0 mm 38797M 16 x 2.0 DIN 376 14.0 mm 38798
€
6,106,206,806,908,80
11,3014,3018,8025,40
7,207,308,008,10
10,2013,1016,4021,7028,60
Nominal Diameter Art.-No.D
Form B, Spiral Point / con imbocco corretto
Form C, Spiral Flute / spirale destra a 35°
Standard TwinBoxMachine Tap + Twist Drillmetric ISO-thread DIN 13TwinBox StandardMaschi a macchina + puntefilettatura metrica ISO DIN 13
DIN 371/376 HSS-E Tol. ISO2/6H
Application:
for general use- non abrasive material up to 900 N/mm²- unalloyed and low alloyed steelSpiral Point for through holesSpiral Flute for blind holes
HSS-G Twist Drills DIN 338, type Nbright finish, profile ground
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legatiForma B per fori passanti35° per fori ciechi
HSS-G punte DIN 338, tipo NSuperficie lucida, rettificata
78
M
DIN 371 DIN 376
DIN 371M 2 x 0.4 45 8 2.8 2.1 37316M 2.3 x 0.4 45 9 2.8 2.1 37318M 2.5 x 0.45 50 9 2.8 2.1 37322M 2.6 x 0.45 50 9 2.8 2.1 37324M 3 x 0.5 56 11 3.5 2.7 37326M 4 x 0.7 63 13 4.5 3.4 37330M 5 x 0.8 70 16 6.0 4.9 37334M 6 x 1.0 80 19 6.0 4.9 37338M 8 x 1.25 90 22 8.0 6.2 37342M 10 x 1.5 100 24 10.0 8.0 37346DIN 376M 2 x 0.4 45 8 1.4 — 38316M 3 x 0.5 56 11 2.2 — 38326M 4 x 0.7 63 13 2.8 2.1 38330M 5 x 0.8 70 16 3.5 2.7 38334M 6 x 1.0 80 19 4.5 3.4 38338M 8 x 1.25 90 22 6.0 4.9 38342M 10 x 1.5 100 24 7.0 5.5 38346M 12 x 1.75 110 29 9.0 7.0 38350M 14 x 2.0 110 30 11.0 9.0 38354M 16 x 2.0 110 32 12.0 9.0 38358M 18 x 2.5 125 34 14.0 11.0 38362M 20 x 2.5 140 34 16.0 12.0 38366M 22 x 2.5 140 34 18.0 14.5 38370M 24 x 3.0 160 38 18.0 14.5 38374M 27 x 3.0 160 38 20.0 16.0 38376M 30 x 3.5 180 45 22.0 18.0 38378
SETM 3 - 12 M 3-4-5-6-8-10 (DIN 371), M 12 (DIN 376) 47813
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
6,606,606,606,605,405,405,705,706,908,50
6,305,905,906,206,207,409,00
10,4013,3015,0021,4029,0033,0035,4056,6059,00
50,50
Machine Tapsmetric ISO-thread DIN 13
Maschi a macchinafilettatura metrica ISO DIN 13
DIN 371/376 Form A HSS-E Tol. ISO2/6HNominal Diameter L 1 L 2 D 2 Art.-No.D
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through holes
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori passanti
79
M
DIN 371 DIN 376
DIN 371M 2 x 0.4 45 8 2.8 2.1 37416M 2.3 x 0.4 45 9 2.8 2.1 37418M 2.5 x 0.45 50 9 2.8 2.1 37422M 2.6 x 0.45 50 9 2.8 2.1 37424M 3 x 0.5 56 11 3.5 2.7 37426M 3.5 x 0.6 56 13 4.0 3.0 37428M 4 x 0.7 63 13 4.5 3.4 37430M 5 x 0.8 70 16 6.0 4.9 37434M 6 x 1.0 80 19 6.0 4.9 37438M 7 x 1.0 80 19 7.0 5.5 37440M 8 x 1.25 90 22 8.0 6.2 37442M 10 x 1.5 100 24 10.0 8.0 37446DIN 376M 3 x 0.5 56 11 2.2 — 38426M 4 x 0.7 63 13 2.8 2.1 38430M 5 x 0.8 70 16 3.5 2.7 38434M 6 x 1.0 80 19 4.5 3.4 38438M 8 x 1.25 90 22 6.0 4.9 38442M 10 x 1.5 100 24 7.0 5.5 38446M 11 x 1.5 100 24 8.0 6.2 38448M 12 x 1.75 110 29 9.0 7.0 38450M 14 x 2.0 110 30 11.0 9.0 38454M 16 x 2.0 110 32 12.0 9.0 38458M 18 x 2.5 125 34 14.0 11.0 38462M 20 x 2.5 140 34 16.0 12.0 38466M 22 x 2.5 140 34 18.0 14.5 38470M 24 x 3.0 160 38 18.0 14.5 38474M 27 x 3.0 160 38 20.0 16.0 38476M 30 x 3.5 180 45 22.0 18.0 38478M 33 x 3.5 180 50 25.0 20.0 38480M 36 x 4.0 200 56 28.0 22.0 38482M 39 x 4.0 200 60 32.0 24.0 38484M 42 x 4.5 200 60 32.0 24.0 38486M 45 x 4.5 220 65 36.0 29.0 38488M 48 x 5.0 250 70 36.0 29.0 38490M 52 x 5.0 250 70 40.0 32.0 38492SETM 3 - 12 M 3-4-5-6-8-10 (DIN 371), M 12 (DIN 376) 47814
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
6,606,606,606,605,406,105,405,705,707,906,908,50
5,905,906,206,207,409,00
10,4010,4013,3015,0021,4029,0033,0035,4056,6059,0084,00
138,00176,00204,00231,00254,00309,00
50,50
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Machine Tapsmetric ISO-thread DIN 13
Maschi a macchinafilettatura metrica ISO DIN 13
DIN 371/376 Form C HSS-E Tol. ISO2/6H
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through and blind holes
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori passanti e ciechi
80
M
M 1 x 0.25 40 5 2.5 2.1 37502M 1.1 x 0.25 40 5 2.5 2.1 37504M 1.2 x 0.25 40 5 2.5 2.1 37506M 1.4 x 0.3 40 7 2.5 2.1 37508M 1.6 x 0.35 40 8 2.5 2.1 37510M 1.7 x 0.35 40 8 2.5 2.1 37512M 1.8 x 0.35 40 8 2.5 2.1 37514M 2 x 0.4 45 8 2.8 2.1 37516M 2.5 x 0.45 50 9 2.8 2.1 37522M 3 x 0.5 56 11 3.5 2.7 37526M 3.5 x 0.6 56 13 4.0 3.0 37528M 4 x 0.7 63 13 4.5 3.4 37530M 5 x 0.8 70 16 6.0 4.9 37534M 6 x 1.0 80 19 6.0 4.9 37538M 7 x 1.0 80 19 7.0 5.5 37540M 8 x 1.25 90 22 8.0 6.2 37542M 10 x 1.5 100 24 10.0 8.0 37546
TINM 3 x 0.5 56 11 3.5 2.7 31526M 4 x 0.7 63 13 4.5 3.4 31530M 5 x 0.8 70 16 6.0 4.9 31534M 6 x 1.0 80 19 6.0 4.9 31538M 8 x 1.25 90 22 8.0 6.2 31542M 10 x 1.5 100 24 10.0 8.0 31546
VAP
M 3 x 0.5 56 11 3.5 2.7 31570M 4 x 0.7 63 13 4.5 3.4 31571M 5 x 0.8 70 16 6.0 4.9 31572M 6 x 1.0 80 19 6.0 4.9 31573M 8 x 1.25 90 22 8.0 6.2 31574M 10 x 1.5 100 24 10.0 8.0 31575
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
20,0020,0020,0017,5017,5017,5017,50
7,107,105,606,205,606,006,008,507,309,00
8,708,709,109,70
12,0015,50
6,206,206,606,608,009,90
Machine Tapsmetric ISO-thread DIN 13
Maschi a macchinafilettatura metrica ISO DIN 13
DIN 371 Form B HSS-E Tol. ISO2/6H
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through holes TIN-coating:- improved resistance to wear and abrasion- excellent anti-friction properties- faster cutting speeds possible
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori passantirivestimento TIN- migliore resistenza all‘ abrasione e alla rottura- eccellente uniformità- possibile velocità di taglio superiore
81
M
M 3 x 0.5 56 11 2.2 — 38526M 4 x 0.7 63 13 2.8 2.1 38530M 5 x 0.8 70 16 3.5 2.7 38534M 6 x 1.0 80 19 4.5 3.4 38538M 8 x 1.25 90 22 6.0 4.9 38542M 9 x 1.25 90 22 7.0 5.5 38544M 10 x 1.5 100 24 7.0 5.5 38546M 12 x 1.75 110 29 9.0 7.0 38550M 14 x 2.0 110 30 11.0 9.0 38554M 16 x 2.0 110 32 12.0 9.0 38558M 18 x 2.5 125 34 14.0 11.0 38562M 20 x 2.5 140 34 16.0 12.0 38566M 22 x 2.5 140 34 18.0 14.5 38570M 24 x 3.0 160 38 18.0 14.5 38574M 27 x 3.0 160 38 20.0 16.0 38576M 30 x 3.5 180 45 22.0 18.0 38578M 33 x 3.5 180 50 25.0 20.0 38580M 36 x 4.0 200 56 28.0 22.0 38582M 39 x 4.0 200 60 32.0 24.0 38584M 42 x 4.5 200 60 32.0 24.0 38586M 45 x 4.5 220 65 36.0 29.0 38588M 48 x 5.0 250 70 36.0 29.0 38590M 52 x 5.0 250 70 40.0 32.0 38592
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
TIN
M 12 x 1.75 110 29 9.0 7.0 31550M 14 x 2.0 110 30 11.0 9.0 31554M 16 x 2.0 110 32 12.0 9.0 31558M 18 x 2.5 125 34 14.0 11.0 31562M 20 x 2.5 140 34 16.0 12.0 31566
VAP
M 12 x 1.75 110 29 9.0 7.0 31576M 14 x 2.0 110 30 11.0 9.0 31577M 16 x 2.0 110 32 12.0 9.0 31578M 18 x 2.5 125 34 14.0 11.0 31579M 20 x 2.5 140 34 16.0 12.0 31580
€
6,106,106,506,507,809,009,40
10,9014,0015,7022,4030,3034,8037,0061,0063,0088,00
144,00185,00215,00243,00267,00325,00
20,8025,0027,7038,3046,20
12,0015,4017,3024,6033,30
Machine Tapsmetric ISO-thread DIN 13
Maschi a macchinafilettatura metrica ISO DIN 13
DIN 376 Form B HSS-E Tol. ISO2/6H
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through holesTIN-coating:- improved resistance to wear and abrasion- excellent anti-friction properties- faster cutting speeds possible
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori passantirivestimento TIN- migliore resistenza all‘ abrasione e alla rottura- eccellente uniformità- possibile velocità di taglio superiore
82
M
M 1 x 0.25 40 4 2.5 2.1 37702M 1.1 x 0.25 40 4 2.5 2.1 37704M 1.2 x 0.25 40 4 2.5 2.1 37706M 1.4 x 0.3 40 5 2.5 2.1 37708M 1.6 x 0.35 40 6 2.5 2.1 37710M 1.7 x 0.35 40 6 2.5 2.1 37712M 1.8 x 0.35 40 6 2.5 2.1 37714M 2 x 0.4 45 6 2.8 2.1 37716M 2.5 x 0.45 50 6 2.8 2.1 37722M 3 x 0.5 56 6 3.5 2.7 37726M 3.5 x 0.6 56 6 4.0 3.0 37728M 4 x 0.7 63 7 4.5 3.4 37730M 5 x 0.8 70 8 6.0 4.9 37734M 6 x 1.0 80 10 6.0 4.9 37738M 7 x 1.0 80 12 7.0 5.5 37740M 8 x 1.25 90 14 8.0 6.2 37742M 10 x 1.5 100 16 10.0 8.0 37746
TIN
M 3 x 0.5 56 6 3.5 2.7 31726M 4 x 0.7 63 7 4.5 3.4 31730M 5 x 0.8 70 8 6.0 4.9 31734M 6 x 1.0 80 10 6.0 4.9 31738M 8 x 1.25 90 14 8.0 6.2 31742M 10 x 1.5 100 16 10.0 8.0 31746
VAP
M 3 x 0.5 56 6 3.5 2.7 31770M 4 x 0.7 63 7 4.5 3.4 31771M 5 x 0.8 70 8 6.0 4.9 31772M 6 x 1.0 80 10 6.0 4.9 31773M 8 x 1.25 90 14 8.0 6.2 31774M 10 x 1.5 100 16 10.0 8.0 31775
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
9,809,80
10,4011,0013,5017,30
22,0022,0022,0020,0020,0020,0020,00
7,507,506,707,506,707,307,30
10,108,80
10,80
7,407,408,008,009,70
11,90
Machine Tapsmetric ISO-thread DIN 13
Maschi a macchinafilettatura metrica ISO DIN 13
DIN 371 Form C/35°RSP HSS-E Tol. ISO2/6H
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Application:for general use - non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for blind holesTIN-coating:- improved resistance to wear and abrasion- excellent anti-friction properties- faster cutting speeds possible
Applicazione:per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori ciechirivestimento TIN:- migliore resistenza all‘ abrasione e alla rottura- eccellente uniformità- possibile velocità di taglio superiore
83
M
M 3 x 0.5 56 6 2.2 — 38726M 4 x 0.7 63 7 2.8 2.1 38730M 5 x 0.8 70 8 3.5 2.7 38734M 6 x 1.0 80 10 4.5 3.4 38738M 8 x 1.25 90 14 6.0 4.9 38742M 10 x 1.5 100 16 7.0 5.5 38746M 12 x 1.75 110 18 9.0 7.0 38750M 14 x 2.0 110 20 11.0 9.0 38754M 16 x 2.0 110 22 12.0 9.0 38758M 18 x 2.5 125 25 14.0 11.0 38762M 20 x 2.5 140 25 16.0 12.0 38766M 22 x 2.5 140 27 18.0 14.5 38770M 24 x 3.0 160 30 18.0 14.5 38774M 27 x 3.0 160 30 20.0 16.0 38776M 30 x 3.5 180 35 22.0 18.0 38778M 33 x 3.5 180 35 25.0 20.0 38780M 36 x 4.0 200 40 28.0 22.0 38782M 39 x 4.0 200 40 32.0 24.0 38784M 42 x 4.5 200 45 32.0 24.0 38786M 45 x 4.5 220 45 36.0 29.0 38788M 48 x 5.0 250 50 36.0 29.0 38790M 52 x 5.0 250 50 40.0 32.0 38792
TIN
M 12 x 1.75 110 18 9.0 7.0 31750M 14 x 2.0 110 20 11.0 9.0 31754M 16 x 2.0 110 22 12.0 9.0 31758M 18 x 2.5 125 25 14.0 11.0 31762M 20 x 2.5 140 25 16.0 12.0 31766
VAP
M 12 x 1.75 110 18 9.0 7.0 31776M 14 x 2.0 110 20 11.0 9.0 31777M 16 x 2.0 110 22 12.0 9.0 31778M 18 x 2.5 125 25 14.0 11.0 31779M 20 x 2.5 140 25 16.0 12.0 31780
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
7,407,407,807,809,30
11,3013,0016,8018,9027,0036,0042,0045,0073,5076,50
106,00174,00222,00257,00291,00320,00388,00
22,9027,8030,9042,9051,90
14,3018,5020,8029,7039,60
Machine Tapsmetric ISO-thread DIN 13
Maschi a macchinafilettatura metrica ISO DIN 13
DIN 376 Form C/35°RSP HSS-E Tol. ISO2/6H
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Application:for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for blind holesTIN-coating:- improved resistance to wear and abrasion- excellent anti-friction properties- faster cutting speeds possible
Applicazione:per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori ciechirivestimento TIN- migliore resistenza all‘ abrasione e alla rottura- eccellente uniformità- possibile velocità di taglio superiore
84
M
DIN 371 DIN 376
DIN 371M 3 x 0.5 56 11 3.5 2.7 37626M 3.5 x 0.6 56 13 4.0 3.0 37628M 4 x 0.7 63 13 4.5 3.4 37630M 5 x 0.8 70 16 6.0 4.9 37634M 6 x 1.0 80 19 6.0 4.9 37638M 7 x 1.0 80 19 7.0 5.5 37640M 8 x 1.25 90 22 8.0 6.2 37642M 10 x 1.5 100 24 10.0 8.0 37646DIN 376M 3 x 0.5 56 11 2.2 — 38626M 4 x 0.7 63 13 2.8 2.1 38630M 5 x 0.8 70 16 3.5 2.7 38634M 6 x 1.0 80 19 4.5 3.4 38638M 8 x 1.25 90 22 6.0 4.9 38642M 10 x 1.5 100 24 7.0 5.5 38646M 12 x 1.75 110 29 9.0 7.0 38650M 14 x 2.0 110 30 11.0 9.0 38654M 16 x 2.0 110 32 12.0 11.0 38658M 18 x 2.5 125 34 14.0 11.0 38662M 20 x 2.5 140 34 16.0 12.0 38666M 22 x 2.5 140 34 18.0 14.5 38670M 24 x 3.0 160 38 18.0 14.5 38674
SETM 3 - 12 M 3-4-5-6-8-10 (DIN 371), M 12 (DIN 376) 47816
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
7,508,307,508,008,00
11,309,90
12,00
8,408,408,708,70
10,5012,6014,6018,9021,0030,4040,9046,7049,80
68,00
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Machine Tapsmetric ISO-thread DIN 13
Maschi a macchinafilettatura metrica ISO DIN 13
DIN 371/376 Form C/15°RSP HSS-E Tol. ISO2/6H
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for blind holes
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori ciechi
85
M
DIN 371 DIN 376
DIN 371M 3 x 0.5 56 11 3.5 2.7 37926M 4 x 0.7 63 13 4.5 3.4 37930M 5 x 0.8 70 16 6.0 4.9 37934M 6 x 1.0 80 19 6.0 4.9 37938M 8 x 1.25 90 22 8.0 6.2 37942M 10 x 1.5 100 24 10.0 8.0 37946DIN 376M 3 x 0.5 56 11 2.2 — 38926M 4 x 0.7 63 13 2.8 2.1 38930M 5 x 0.8 70 16 3.5 2.7 38934M 6 x 1.0 80 19 4.5 3.4 38938M 8 x 1.25 90 22 6.0 4.9 38942M 10 x 1.5 100 24 7.0 5.5 38946M 12 x 1.75 110 29 9.0 7.0 38950M 14 x 2.0 110 30 11.0 9.0 38954M 16 x 2.0 110 32 12.0 9.0 38958M 18 x 2.5 125 34 14.0 11.0 38962M 20 x 2.5 140 34 16.0 12.0 38966M 22 x 2.5 140 34 18.0 14.5 38970M 24 x 3.0 160 38 18.0 14.5 38974
SETM 3 - 12 M 3-4-5-6-8-10 (DIN 371), M 12 (DIN 376) 47819
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
7,607,608,208,20
10,1012,00
8,308,308,708,70
10,5012,6014,6018,9021,0030,0040,6046,7049,80
71,40
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Machine Tapsmetric ISO-thread DIN 13
Maschi a macchinafilettatura metrica ISO DIN 13
DIN 371/376 Form B-AZ HSS-E Tol. ISO2/6H
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through holes
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori passanti
86
M
100 mmM 3 x 0.5 100 11 3.5 2.7 32010M 4 x 0.7 100 13 4.5 3.4 32011M 5 x 0.8 100 16 6.0 4.9 32012M 6 x 1.0 100 19 6.0 4.9 32013M 8 x 1.25 100 22 8.0 6.2 32014M 10 x 1.5 100 24 10.0 8.0 32015M 12 x 1.75 100 29 12.0 9.0 32016
120 mmM 4 x 0.7 120 13 4.5 3.4 32021M 5 x 0.8 120 16 6.0 4.9 32022M 6 x 1.0 120 19 6.0 4.9 32023M 8 x 1.25 120 22 8.0 6.2 32024M 10 x 1.5 120 24 10.0 8.0 32025M 12 x 1.75 120 29 12.0 9.0 32026
150 mmM 4 x 0.7 150 13 4.5 3.4 32031M 5 x 0.8 150 16 6.0 4.9 32032M 6 x 1.0 150 19 6.0 4.9 32033M 8 x 1.25 150 22 8.0 6.2 32034M 10 x 1.5 150 24 10.0 8.0 32035M 12 x 1.75 150 29 12.0 9.0 32036
150 mmM 4 x 0.7 150 13 2.8 2.1 32071M 5 x 0.8 150 16 3.5 2.7 32072M 6 x 1.0 150 19 4.5 3.4 32073M 8 x 1.25 150 22 6.0 4.9 32074M 10 x 1.5 150 24 7.0 5.5 32075M 12 x 1.75 150 29 9.0 7.0 32076
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
8,008,008,508,50
10,2010,7012,00
8,509,209,20
10,7012,2014,20
8,909,909,90
12,1014,7017,30
8,909,909,90
12,1014,7017,30
Machine Taps, extra longmetric ISO-thread DIN 13
Maschi a macchina, extra lungofilettatura metrica ISO DIN 13
� DIN 371 Form B HSS-E Tol. ISO2/6H
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Application:
for general use in awkward places- non abrasive material up to 900 N/mm2
- unalloyed and low alloyed steel- for through holes
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori passanti
with reduced shank / con gambo passante
87
M
100 mmM 3 x 0.5 100 6 3.5 2.7 32040M 4 x 0.7 100 7 4.5 3.4 32041M 5 x 0.8 100 8 6.0 4.9 32042M 6 x 1.0 100 10 6.0 4.9 32043M 8 x 1.25 100 14 8.0 6.2 32044M 10 x 1.5 100 16 10.0 8.0 32045M 12 x 1.75 100 18 12.0 9.0 32046
120 mmM 4 x 0.7 120 7 4.5 3.4 32051M 5 x 0.8 120 8 6.0 4.9 32052M 6 x 1.0 120 10 6.0 4.9 32053M 8 x 1.25 120 14 8.0 6.2 32054M 10 x 1.5 120 16 10.0 8.0 32055M 12 x 1.75 120 18 12.0 9.0 32056
150 mmM 4 x 0.7 150 7 4.5 3.4 32061M 5 x 0.8 150 8 6.0 4.9 32062M 6 x 1.0 150 10 6.0 4.9 32063M 8 x 1.25 150 14 8.0 6.2 32064M 10 x 1.5 150 16 10.0 8.0 32065M 12 x 1.75 150 18 12.0 9.0 32066
150 mm M 4 x 0.7 150 7 2.8 2.1 32081M 5 x 0.8 150 8 3.5 2.7 32082M 6 x 1.0 150 10 4.5 3.4 32083M 8 x 1.25 150 14 6.0 4.9 32084M 10 x 1.5 150 16 7.0 5.5 32085M 12 x 1.75 150 18 9.0 7.0 32086
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
9,609,60
10,3010,3012,0013,0013,10
10,0011,0011,0012,6014,4015,30
10,3011,8011,8014,0016,9018,30
10,3011,8011,8014,0016,9018,30
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori ciechi
Machine Taps, extra longmetric ISO-thread DIN 13
Maschi a macchina, extra lungofilettatura metrica ISO DIN 13
� DIN 371 Form C/35°RSP HSS-E Tol. ISO2/6H
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Application:
for general use in awkward places- non abrasive material up to 900 N/mm2
- unalloyed and low alloyed steel- for blind holes
with reduced shank / con gambo passante
88
M
DIN 371 DIN 376
6G DIN 371M 2.5 x 0.45 50 9 2.8 2.1 32522M 3 x 0.5 56 11 3.5 2.7 32526M 4 x 0.7 63 13 4.5 3.4 32530M 5 x 0.8 70 16 6.0 4.9 32534M 6 x 1.0 80 19 6.0 4.9 32538M 8 x 1.25 90 22 8.0 6.2 32542M 10 x 1.5 100 24 10.0 8.0 32546
DIN 376M 12 x 1.75 110 29 9.0 7.0 32550M 14 x 2.0 110 30 11.0 9.0 32554M 16 x 2.0 110 32 12.0 9.0 32558M 18 x 2.5 125 34 14.0 11.0 32562M 20 x 2.5 140 34 16.0 12.0 32566
7G DIN 371M 3 x 0.5 56 11 3.5 2.7 32503M 4 x 0.7 63 13 4.5 3.4 32504M 5 x 0.8 70 16 6.0 4.9 32505M 6 x 1.0 80 19 6.0 4.9 32506M 8 x 1.25 90 22 8.0 6.2 32508M 10 x 1.5 100 24 10.0 8.0 32510
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
DIN 376M 12 x 1.75 110 29 9.0 7.0 32512
+ 0,1 mm DIN 371M 3 x 0.5 56 11 3.5 2.7 32583M 4 x 0.7 63 13 4.5 3.4 32584M 5 x 0.8 70 16 6.0 4.9 32585M 6 x 1.0 80 19 6.0 4.9 32586M 8 x 1.25 90 22 8.0 6.2 32588M 10 x 1.5 100 24 10.0 8.0 32590
DIN 376M 12 x 1.75 110 29 9.0 7.0 32592
€
7,507,507,507,807,809,60
11,00
13,2018,9022,0029,9042,00
7,607,608,008,00
10,2012,10
14,00
7,607,608,008,00
10,1012,10
14,00
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Machine Taps, with oversizemetric ISO-thread DIN 13
Maschi a macchina, tolleranza maggioratafilettatura metrica ISO DIN 13
DIN 371/376 Form B HSS-E
Application:
for general use- non abrasive material up to 900 N/mm2
- unalloyed and low alloyed steel- long chipping material- for through holes
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- Materiali truciolo lungo- per fori passanti
89
M
DIN 371 DIN 376
4H DIN 371M 3 x 0.5 56 11 3.5 2.7 32612M 4 x 0.7 63 13 4.5 3.4 32614M 5 x 0.8 70 16 6.0 4.9 32616M 6 x 1.0 80 19 6.0 4.9 32618M 8 x 1.25 90 22 8.0 6.2 32620M 10 x 1.5 100 24 10.0 8.0 32622
DIN 376M 12 x 1.75 110 29 9.0 7.0 32624M 14 x 2.0 110 30 11.0 9.0 32625M 16 x 2.0 110 32 12.0 9.0 32626
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
7,607,608,008,00
10,1012,10
14,0020,0023,00
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Application:
for general use- non abrasive material up to 900 N/mm2
- unalloyed and low alloyed steel- long chipping material- for through holes
Machine Taps, with undersizemetric ISO-thread DIN13
Maschi a macchina, accoppiamento finefilettatura metrica ISO DIN 13
DIN 371/376 Form B HSS-E Tol. ISO1/4H
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- Materiali truciolo lungo- per fori passanti
90
M
DIN 371 DIN 376
6G DIN 371M 3 x 0.5 56 6 3.5 2.7 32726M 4 x 0.7 63 7 4.5 3.4 32730M 5 x 0.8 70 8 6.0 4.9 32734M 6 x 1.0 80 10 6.0 4.9 32738M 8 x 1.25 90 14 8.0 6.2 32742M 10 x 1.5 100 16 10.0 8.0 32746
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
DIN 376M 12 x 1.75 110 18 9.0 7.0 32712
+ 0,1 mm DIN 371M 3 x 0.5 56 6 3.5 2.7 32783M 4 x 0.7 63 7 4.5 3.4 32784M 5 x 0.8 70 8 6.0 4.9 32785M 6 x 1.0 80 10 6.0 4.9 32786M 8 x 1.25 90 14 8.0 6.2 32788M 10 x 1.5 100 16 10.0 8.0 32790
DIN 376M 12 x 1.75 110 18 9.0 7.0 32750M 14 x 2.0 110 20 11.0 9.0 32754M 16 x 2.0 110 22 12.0 9.0 32758M 18 x 2.5 125 25 14.0 11.0 32762M 20 x 2.5 140 25 16.0 12.0 32766
7G DIN 371M 3 x 0.5 56 6 3.5 2.7 32703M 4 x 0.7 63 7 4.5 3.4 32704M 5 x 0.8 70 8 6.0 4.9 32705M 6 x 1.0 80 10 6.0 4.9 32706M 8 x 1.25 90 14 8.0 6.2 32708M 10 x 1.5 100 16 10.0 8.0 32710
DIN 376M 12 x 1.75 110 18 9.0 7.0 32792
€
9,009,009,409,40
11,5013,30
14,4020,7021,8032,5045,70
9,209,209,909,90
12,7015,00
16,10
9,209,209,909,90
12,7015,00
16,20
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Machine Taps, with oversizemetric ISO-thread DIN 13
Maschi a macchina, tolleranza maggioratafilettatura metrica ISO DIN 13
DIN 371/376 Form C/35°RSP HSS-E
Application:
for general use- non abrasive material up to 900 N/mm2
- unalloyed and low alloyed steel- long chipping material- for blind holes
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- Materiali truciolo lungo- per fori ciechi
91
M
DIN 371 DIN 376
4H DIN 371M 3 x 0.5 56 6 3.5 2.7 32652M 4 x 0.7 63 7 4.5 3.4 32654M 5 x 0.8 70 8 6.0 4.9 32656M 6 x 1.0 80 10 6.0 4.9 32658M 8 x 1.25 90 14 8.0 6.2 32660M 10 x 1.5 100 16 10.0 8.0 32662
DIN 376M 12 x 1.75 110 18 9.0 7.0 32664M 14 x 2.0 110 20 11.0 9.0 32665M 16 x 2.0 110 22 12.0 9.0 32666
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
9,209,209,909,90
12,7015,00
16,2023,0024,00
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Application:
for general use- non abrasive material up to 900 N/mm2
- unalloyed and low alloyed steel- long chipping material- for blind holes
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- Materiali truciolo lungo- per fori ciechi
Machine Taps, with undersizemetric ISO-thread DIN 13
Maschi a macchina, accoppiamento finefilettatura metrica ISO DIN 13
DIN 371/376 Form C/35°RSP HSS-E Tol. ISO1/4H
92
Mf
M 4 x 0.35 63 10 2.8 2.1 39402M 5 x 0.5 70 12 3.5 2.7 39404M 6 x 0.75 80 14 4.5 3.4 39407M 8 x 0.75 80 19 6.0 4.9 39410M 8 x 1.0 90 22 6.0 4.9 39411M 10 x 1.0 90 20 7.0 5.5 39415M 10 x 1.25 100 24 7.0 5.5 39416M 12 x 1.0 100 22 9.0 7.0 39420M 12 x 1.25 100 22 9.0 7.0 39421M 12 x 1.5 100 22 9.0 7.0 39422M 14 x 1.0 100 22 11.0 9.0 39426M 14 x 1.25 100 22 11.0 9.0 39427M 14 x 1.5 100 22 11.0 9.0 39428M 16 x 1.0 100 22 12.0 9.0 39431M 16 x 1.5 100 22 12.0 9.0 39433M 18 x 1.0 110 25 14.0 11.0 39434M 18 x 1.5 110 25 14.0 11.0 39436M 18 x 2.0 125 34 14.0 11.0 39437M 20 x 1.0 125 25 16.0 12.0 39438M 20 x 1.25 125 25 16.0 12.0 39439M 20 x 1.5 125 25 16.0 12.0 39440M 20 x 2.0 140 34 16.0 12.0 39441M 22 x 1.0 125 25 18.0 14.5 39443M 22 x 1.5 125 25 18.0 14.5 39445M 22 x 2.0 140 34 18.0 14.5 39446M 24 x 1.0 140 28 18.0 14.5 39448M 24 x 1.5 140 28 18.0 14.5 39450M 24 x 2.0 140 28 18.0 14.5 39451M 25 x 1.0 140 28 18.0 14.5 39452M 26 x 1.5 140 28 18.0 14.5 39454M 27 x 1.5 140 28 20.0 16.0 39456M 27 x 2.0 140 28 20.0 16.0 39457M 28 x 1.5 140 28 20.0 16.0 39459M 30 x 1.5 150 28 22.0 18.0 39463M 30 x 2.0 150 28 22.0 18.0 39464M 32 x 1.5 150 28 22.0 18.0 39466M 32 x 2.0 150 28 22.0 18.0 39467M 33 x 2.0 160 30 25.0 20.0 39468M 35 x 1.5 170 30 28.0 22.0 39472M 36 x 1.5 170 30 28.0 22.0 39473M 36 x 2.0 170 30 28.0 22.0 39474M 38 x 1.5 170 30 28.0 22.0 39476M 40 x 1.5 170 30 32.0 24.0 39480M 42 x 1.5 170 30 32.0 24.0 39483M 45 x 1.5 180 32 36.0 29.0 39486M 48 x 1.5 190 32 36.0 29.0 39489M 50 x 1.5 190 32 36.0 29.0 39494M 52 x 1.5 190 32 40.0 32.0 39497
€
10,4010,4010,4010,4010,4012,5012,5016,2016,7016,2020,1020,1020,1023,8023,8028,2028,2028,2030,7030,7030,7030,7038,8038,8038,8045,4045,4045,4045,4045,4056,7056,7056,7065,0065,0083,5083,5083,5083,50
104,50104,50111,00121,00134,00158,00191,00220,00243,00
Machine Tapsmetric-fine ISO-thread DIN 13
Maschi a macchinafilettatura metrica fine ISO DIN 13
DIN 374 Form C HSS-E Tol. ISO2/6H
Nominal Diameter L 1 L 2 D 2 Art.-No.D
93
Mf
M 3 x 0.35 56 9 2.2 - 39501M 4 x 0.35 63 10 2.8 2.1 39502M 4 x 0.5 63 10 2.8 2.1 39503M 5 x 0.5 70 12 3.5 2.7 39504M 5 x 0.75 70 12 3.5 2.7 39505M 6 x 0.5 80 14 4.5 3.4 39506M 6 x 0.75 80 14 4.5 3.4 39507M 7 x 0.75 80 14 5.5 4.3 39508M 8 x 0.5 80 19 6.0 4.9 39509M 8 x 0.75 80 19 6.0 4.9 39510M 8 x 1.0 90 22 6.0 4.9 39511M 9 x 0.75 80 19 7.0 5.5 39512M 9 x 1.0 90 22 7.0 5.5 39513M 10 x 0.75 90 20 7.0 5.5 39514M 10 x 1.0 90 20 7.0 5.5 39515M 10 x 1.25 100 24 7.0 5.5 39516M 11 x 1.0 90 20 8.0 6.2 39517M 11 x 1.25 90 22 8.0 6.2 39518M 12 x 0.75 100 22 9.0 7.0 39519M 12 x 1.0 100 22 9.0 7.0 39520M 12 x 1.25 100 22 9.0 7.0 39521M 12 x 1.5 100 22 9.0 7.0 39522M 13 x 1.0 100 22 11.0 9.0 39523M 13 x 1.5 100 22 11.0 9.0 39524M 14 x 0.75 100 22 11.0 9.0 39525M 14 x 1.0 100 22 11.0 9.0 39526M 14 x 1.25 100 22 11.0 9.0 39527M 14 x 1.5 100 22 11.0 9.0 39528M 15 x 1.0 100 22 12.0 9.0 39529M 15 x 1.5 100 22 12.0 9.0 39530M 16 x 1.0 100 22 12.0 9.0 39531M 16 x 1.25 100 22 12.0 9.0 39532M 16 x 1.5 100 22 12.0 9.0 39533M 18 x 1.0 110 25 14.0 11.0 39534M 18 x 1.25 110 25 14.0 11.0 39535M 18 x 1.5 110 25 14.0 11.0 39536M 18 x 2.0 125 34 14.0 11.0 39537
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
11,5011,5011,5011,5011,5011,5011,5011,5011,5011,5011,5011,5011,5013,4013,4013,4018,4018,4018,4018,4018,4018,4023,7023,7023,7023,7023,7023,7026,0026,0026,5026,5026,5032,3032,3032,3032,30
Machine Tapsmetric-fine ISO-thread DIN 13
Maschi a macchinafilettatura metrica fine ISO DIN 13
DIN 374 Form B HSS-E Tol. ISO2/6H
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through holes
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori passanti
94
M 20 x 1.0 125 25 16.0 12.0 39538M 20 x 1.25 125 25 16.0 12.0 39539M 20 x 1.5 125 25 16.0 12.0 39540M 20 x 2.0 140 34 16.0 12.0 39541M 21 x 1.5 125 25 16.0 12.0 39542M 22 x 1.0 125 25 18.0 14.5 39543M 22 x 1.25 125 25 18.0 14.5 39544M 22 x 1.5 125 25 18.0 14.5 39545M 22 x 2.0 140 34 18.0 14.5 39546M 23 x 1.5 125 25 18.0 14.5 39547M 24 x 1.0 140 28 18.0 14.5 39548M 24 x 1.25 140 28 18.0 14.5 39549M 24 x 1.5 140 28 18.0 14.5 39550M 24 x 2.0 140 28 18.0 14.5 39551M 25 x 1.0 140 28 18.0 14.5 39552M 25 x 1.5 140 28 18.0 14.5 39553M 26 x 1.0 140 28 18.0 14.5 3955XM 26 x 1.5 140 28 18.0 14.5 39554M 26 x 2.0 140 28 18.0 14.5 39555M 27 x 1.0 140 28 20.0 16.0 39500M 27 x 1.5 140 28 20.0 16.0 39556M 27 x 2.0 140 28 20.0 16.0 39557M 28 x 1.0 140 28 20.0 16.0 39558M 28 x 1.5 140 28 20.0 16.0 39559M 28 x 2.0 140 28 20.0 16.0 39560M 29 x 1.5 150 28 22.0 18.0 39561M 30 x 1.0 150 28 22.0 18.0 39562M 30 x 1.5 150 28 22.0 18.0 39563M 30 x 2.0 150 28 22.0 18.0 39564M 30 x 2.5 180 45 22.0 18.0 3956XM 30 x 3.0 180 45 22.0 18.0 39565M 32 x 1.5 150 28 22.0 18.0 39566M 32 x 2.0 150 28 22.0 18.0 39567M 32 x 3.0 180 50 22.0 18.0 39592M 33 x 1.5 160 30 25.0 20.0 39593M 33 x 2.0 160 30 25.0 20.0 39568M 33 x 3.0 180 50 25.0 20.0 39569
MfD
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
35,8035,8035,8035,8035,8043,8043,8043,8043,8050,8050,8050,8050,8050,8054,2054,2054,2054,2054,2064,6064,6064,6064,6064,6064,6072,7072,7072,7072,7072,7072,7088,9088,9088,9088,9088,9088,90
Machine Tapsmetric-fine ISO-thread DIN 13
Maschi a macchinafilettatura metrica fine ISO DIN 13
DIN 374 Form B HSS-E Tol. ISO2/6H
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through holes
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori passanti
95
M 34 x 1.5 170 30 28.0 22.0 39570M 34 x 2.0 170 30 28.0 22.0 39571M 35 x 1.5 170 30 28.0 22.0 39572M 36 x 1.5 170 30 28.0 22.0 39573M 36 x 2.0 170 30 28.0 22.0 39574M 36 x 3.0 200 56 28.0 22.0 39575M 38 x 1.5 170 30 28.0 22.0 39576M 39 x 1.5 170 30 32.0 24.0 39577M 39 x 2.0 170 30 32.0 24.0 39578M 39 x 3.0 200 60 32.0 24.0 39579M 40 x 1.5 170 30 32.0 24.0 39580M 40 x 2.0 170 30 32.0 24.0 39581M 40 x 3.0 200 60 32.0 24.0 39582M 42 x 1.5 170 30 32.0 24.0 39583M 42 x 2.0 170 30 32.0 24.0 39584M 42 x 3.0 200 60 32.0 24.0 39585M 45 x 1.5 180 32 36.0 29.0 39586M 45 x 2.0 180 32 36.0 29.0 39587M 45 x 3.0 200 50 36.0 29.0 39588M 48 x 1.5 190 32 36.0 29.0 39589M 48 x 2.0 190 32 36.0 29.0 39590M 48 x 3.0 225 50 36.0 29.0 39591M 50 x 1.5 190 32 36.0 29.0 39594M 50 x 2.0 190 32 36.0 29.0 39595M 50 x 3.0 225 50 36.0 29.0 39596M 52 x 1.5 190 32 40.0 32.0 39597M 52 x 2.0 190 32 40.0 32.0 39598M 52 x 3.0 225 50 40.0 32.0 39599M 63 x 1.5 275 50 50.0 39.0 3959X
MfD
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
88,9088,9088,90
111,00111,00111,00118,00118,00118,00118,00131,00131,00131,00147,00147,00147,00173,00173,00173,00207,00207,00207,00242,00242,00242,00265,00265,00265,00415,00
Machine Tapsmetric-fine ISO-thread DIN 13
Maschi a macchinafilettatura metrica fine ISO DIN 13
DIN 374 Form B HSS-E Tol. ISO2/6H
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through holes
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori passanti
96
Mf
M 3 x 0.35 56 5 2.2 - 39701M 4 x 0.35 63 5 2.8 2.1 39702M 4 x 0.5 63 5 2.8 2.1 39703M 5 x 0.5 70 5 3.5 2.7 39704M 5 x 0.75 70 8 3.5 2.7 39705M 6 x 0.5 80 5 4.5 3.4 39706M 6 x 0.75 80 8 4.5 3.4 39707M 7 x 0.75 80 8 5.5 4.3 39708M 8 x 0.5 80 8 6.0 4.9 39709M 8 x 0.75 80 8 6.0 4.9 39710M 8 x 1.0 90 10 6.0 4.9 39711M 9 x 0.75 80 10 7.0 5.5 39712M 9 x 1.0 90 10 7.0 5.5 39713M 10 x 0.75 90 10 7.0 5.5 39714M 10 x 1.0 90 10 7.0 5.5 39715M 10 x 1.25 100 16 7.0 5.5 39716M 11 x 1.0 90 11 8.0 6.2 39717M 11 x 1.25 90 14 8.0 6.2 39718M 12 x 0.75 100 10 9.0 7.0 39719M 12 x 1.0 100 11 9.0 7.0 39720M 12 x 1.25 100 15 9.0 7.0 39721M 12 x 1.5 100 15 9.0 7.0 39722M 13 x 1.0 100 11 11.0 9.0 39723M 13 x 1.5 100 15 11.0 9.0 39724M 14 x 0.75 100 10 11.0 9.0 39725M 14 x 1.0 100 11 11.0 9.0 39726M 14 x 1.25 100 15 11.0 9.0 39727M 14 x 1.5 100 15 11.0 9.0 39728M 15 x 1.0 100 12 12.0 9.0 39729M 15 x 1.5 100 15 12.0 9.0 39730M 16 x 1.0 100 12 12.0 9.0 39731M 16 x 1.25 100 15 12.0 9.0 39732M 16 x 1.5 100 15 12.0 9.0 39733M 18 x 1.0 110 13 14.0 11.0 39734M 18 x 1.25 110 15 14.0 11.0 39735M 18 x 1.5 110 17 14.0 11.0 39736M 18 x 2.0 125 20 14.0 11.0 39737
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
13,1013,1013,1013,1013,1013,1013,1013,1013,1013,1013,1013,1013,1015,5015,5015,5020,0020,0020,0020,0020,0020,0024,4024,4024,4024,4024,4024,4028,3028,3028,3028,3028,3035,4035,4035,4035,40
Machine Tapsmetric ISO-thread DIN 13
Maschi a macchinafilettatura metrica fine ISO DIN 13
DIN 374 Form C/35° RSP HSS-E Tol. ISO2/6H
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for blind holes
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori ciechi
97
M 20 x 1.0 125 14 16.0 12.0 39738M 20 x 1.25 125 17 16.0 12.0 39739M 20 x 1.5 125 17 16.0 12.0 39740M 20 x 2.0 140 20 16.0 12.0 39741M 21 x 1.5 125 17 16.0 12.0 39742M 22 x 1.0 125 14 18.0 14.5 39743M 22 x 1.25 125 17 18.0 14.5 39744M 22 x 1.5 125 17 18.0 14.5 39745M 22 x 2.0 140 20 18.0 14.5 39746M 23 x 1.5 125 17 18.0 14.5 39747M 24 x 1.0 140 15 18.0 14.5 39748M 24 x 1.25 140 17 18.0 14.5 39749M 24 x 1.5 140 20 18.0 14.5 39750M 24 x 2.0 140 20 18.0 14.5 39751M 25 x 1.0 140 15 18.0 14.5 39752M 25 x 1.5 140 20 18.0 14.5 39753M 26 x 1.0 140 15 18.0 14.5 3975XM 26 x 1.5 140 20 18.0 14.5 39754M 26 x 2.0 140 20 18.0 14.5 39755M 27 x 1.0 140 15 20.0 16.0 39700M 27 x 1.5 140 20 20.0 16.0 39756M 27 x 2.0 140 20 20.0 16.0 39757M 28 x 1.0 140 15 20.0 16.0 39758M 28 x 1.5 140 20 20.0 16.0 39759M 28 x 2.0 140 20 20.0 16.0 39760M 29 x 1.5 150 22 22.0 18.0 39761M 30 x 1.0 150 17 22.0 18.0 39762M 30 x 1.5 150 22 22.0 18.0 39763M 30 x 2.0 150 22 22.0 18.0 39764M 30 x 2.5 180 27 22.0 18.0 3976XM 30 x 3.0 180 30 22.0 18.0 39765M 32 x 1.5 150 22 22.0 18.0 39766M 32 x 2.0 150 22 22.0 18.0 39767M 32 x 3.0 180 30 22.0 18.0 39792M 33 x 1.5 160 24 25.0 20.0 39793M 33 x 2.0 160 24 25.0 20.0 39768M 33 x 3.0 180 30 25.0 20.0 39769
MfD
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
39,3039,3039,3039,3039,3048,0048,0048,0048,0057,7057,7057,7057,7057,7057,7057,7057,7057,7057,7069,0069,3069,3069,3069,3069,3078,7078,7078,7078,7078,7078,7098,7098,7098,7098,7098,7098,70
Machine Tapsmetric ISO-thread DIN 13
Maschi a macchinafilettatura metrica fine ISO DIN 13
DIN 374 Form C/35° RSP HSS-E Tol. ISO2/6H
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for blind holes
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori ciechi
98
M 34 x 1.5 170 24 28.0 22.0 39770M 34 x 2.0 170 24 28.0 22.0 39771M 35 x 1.5 170 24 28.0 22.0 39772M 36 x 1.5 170 24 28.0 22.0 39773M 36 x 2.0 170 24 28.0 22.0 39774M 36 x 3.0 200 30 28.0 22.0 39775M 38 x 1.5 170 24 28.0 22.0 39776M 39 x 1.5 170 25 32.0 24.0 39777M 39 x 2.0 170 25 32.0 24.0 39778M 39 x 3.0 200 30 32.0 24.0 39779M 40 x 1.5 170 25 32.0 24.0 39780M 40 x 2.0 170 25 32.0 24.0 39781M 40 x 3.0 200 30 32.0 24.0 39782M 42 x 1.5 170 25 32.0 24.0 39783M 42 x 2.0 170 25 32.0 24.0 39784M 42 x 3.0 200 30 32.0 24.0 39785M 45 x 1.5 180 27 36.0 29.0 39786M 45 x 2.0 180 27 36.0 29.0 39787M 45 x 3.0 200 30 36.0 29.0 39788M 48 x 1.5 190 27 36.0 29.0 39789M 48 x 2.0 190 27 36.0 29.0 39790M 48 x 3.0 225 33 36.0 29.0 39791M 50 x 1.5 190 27 36.0 29.0 39794M 50 x 2.0 190 27 36.0 29.0 39795M 50 x 3.0 225 33 36.0 29.0 39796M 52 x 1.5 190 27 40.0 32.0 39797M 52 x 2.0 190 27 40.0 32.0 39798M 52 x 3.0 225 33 40.0 32.0 39799M 63 x 1.5 275 40 50.0 39.0 3979X
MfD
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
98,7098,7098,70
123,90123,90123,90131,20131,20131,20131,20145,00145,00145,00163,00163,00163,00190,00190,00190,00226,00226,00226,00262,50262,50262,50288,00288,00288,00441,00
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Machine Tapsmetric ISO-thread DIN 13
Maschi a macchinafilettatura metrica fine ISO DIN 13
DIN 374 Form C/35° RSP HSS-E Tol. ISO2/6H
Applicazione: per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori ciechi
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for blind holes
99
BSW
DIN 371 DIN 376
� DIN 371BSW 1/8 x 40 56 11 3.5 2.7 70506BSW 5/32 x 32 63 13 4.5 3.4 70508BSW 3/16 x 24 70 15 6.0 4.9 70510BSW 1/4 x 20 80 17 7.0 5.5 70514BSW 5/16 x 18 90 20 8.0 6.2 70516BSW 3/8 x 16 100 22 9.0 7.0 70518BSW 7/16 x 14 100 22 11.0 9.0 70520BSW 1/2 x 12 110 25 12.0 9.0 70522� DIN 376BSW 1/4 x 20 80 17 4.5 3.4 71514BSW 5/16 x 18 90 20 6.0 4.9 71516BSW 3/8 x 16 100 22 7.0 5.5 71518BSW 7/16 x 14 100 22 8.0 6.2 71520BSW 1/2 x 12 110 25 9.0 7.0 71522BSW 9/16 x 12 110 26 11.0 9.0 71524BSW 5/8 x 11 110 27 12.0 9.0 71526BSW 3/4 x 10 125 30 14.0 11.0 71530BSW 7/8 x 9 140 32 18.0 14.5 71534BSW 1" x 8 160 36 20.0 16.0 71538BSW 1.1/4 x 7 180 40 22.0 18.0 71546BSW 1.3/8 x 6 200 50 28.0 22.0 71550BSW 1.1/2 x 6 200 50 32.0 24.0 71554
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
8,208,208,208,20
10,4011,6013,8013,80
8,2010,4011,6013,8013,8021,0021,0040,5049,5056,0077,00
161,00161,00
Machine TapsWithworth-thread BS 84
Maschi a macchinafilettatura Whitworth BS 84
� DIN 371/376 Form B HSS-E
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through holes
Applicazione: per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori passanti
100
BSW
DIN 371 DIN 376
� DIN 371BSW 1/8 x 40 56 7 3.5 2.7 70706BSW 5/32 x 32 63 7 4.5 3.4 70708BSW 3/16 x 24 70 10 6.0 4.9 70710BSW 1/4 x 20 80 13 7.0 5.5 70714BSW 5/16 x 18 90 14 8.0 6.2 70716BSW 3/8 x 16 100 16 9.0 7.0 70718BSW 7/16 x 14 100 17 11.0 9.0 70720BSW 1/2 x 12 110 20 12.0 9.0 70722� DIN 376BSW 1/4 x 20 80 13 4.5 3.4 71714BSW 5/16 x 18 90 14 6.0 4.9 71716BSW 3/8 x 16 100 16 7.0 5.5 71718BSW 7/16 x 14 100 17 8.0 6.2 71720BSW 1/2 x 12 110 20 9.0 7.0 71722BSW 9/16 x 12 110 20 11.0 9.0 71724BSW 5/8 x 11 110 22 12.0 9.0 71726BSW 3/4 x 10 125 25 14.0 11.0 71730BSW 7/8 x 9 140 27 18.0 14.5 71734BSW 1" x 8 160 30 20.0 16.0 71738BSW 1.1/4 x 7 180 35 22.0 18.0 71746BSW 1.3/8 x 6 200 40 28.0 22.0 71750BSW 1.1/2 x 6 200 40 32.0 24.0 71754
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
10,2010,2010,2010,2012,7014,0017,2017,20
10,2012,7014,0017,2017,2025,4025,4050,6061,4069,0088,00
193,00193,00
Machine TapsWithworth-thread BS 84
Maschi a macchinafilettatura Whitworth BS 84
� DIN 371/376 Form C/35° RSP HSS-E
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Applicazione: per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori ciechi
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for blind holes
101
UNC
DIN 371 DIN 376
� DIN 371UNC No. 4 x 40 50 10 3.5 2.7 74504UNC No. 5 x 40 56 11 3.5 2.7 74505UNC No. 6 x 32 56 12 4.0 3.0 74506UNC No. 8 x 32 63 13 4.5 3.4 74508UNC No. 10 x 24 70 15 6.0 4.9 74510UNC No. 12 x 24 70 16 6.0 4.9 74512UNC 1/4 x 20 80 17 7.0 5.5 74514UNC 5/16 x 18 90 20 8.0 6.2 74516UNC 3/8 x 16 100 22 9.0 7.0 74518� DIN 376UNC No. 4 x 40 50 10 1.8 - 75504UNC No. 5 x 40 56 11 2.2 1.8 75505UNC No. 6 x 32 56 12 2.5 2.1 75506UNC No. 8 x 32 63 13 2.8 2.1 75508UNC No. 10 x 24 70 15 3.5 2.7 75510UNC No. 12 x 24 70 16 3.5 2.7 75512UNC 1/4 x 20 80 17 4.5 3.4 75514UNC 5/16 x 18 90 20 6.0 4.9 75516UNC 3/8 x 16 100 22 7.0 5.5 75518UNC 7/16 x 14 100 22 8.0 6.2 75520UNC 1/2 x 13 110 25 9.0 7.0 75522UNC 9/16 x 12 110 26 11.0 9.0 75524UNC 5/8 x 11 110 27 12.0 9.0 75526UNC 3/4 x 10 125 30 14.0 11.0 75530UNC 7/8 x 9 140 32 18.0 14.5 75534UNC 1" x 8 160 36 20.0 16.0 75538UNC 1.1/4 x 7 180 40 22.0 18.0 75546UNC 1.1/2 x 6 200 50 32.0 24.0 75554UNC 1.3/4 x 5 220 65 36.0 29.0 75562UNC 2" x 4.1/2 250 70 40.0 32.0 75570
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
8,208,208,208,208,208,208,20
10,4011,60
8,208,208,208,208,208,208,20
10,4011,6013,8013,8021,0021,0040,5049,5056,0077,00
161,00278,00404,00
Machine TapsUnified Coarse thread ANSI B 1.1
Maschi a macchinafilettatura unificata, serie grossa ANSI B1.1
� DIN 371/376 Form B HSS-E Tol. 2B
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through holes
Applicazione: per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori passanti
102
UNC
DIN 371 DIN 376
� DIN 371UNC No. 4 x 40 50 6 3.5 2.7 74704UNC No. 5 x 40 56 7 3.5 2.7 74705UNC No. 6 x 32 56 7 4.0 3.0 74706UNC No. 8 x 32 63 8 4.5 3.4 74708UNC No. 10 x 24 70 10 6.0 4.9 74710UNC No. 12 x 24 70 10 6.0 4.9 74712UNC 1/4 x 20 80 13 7.0 5.5 74714UNC 5/16 x 18 90 14 8.0 6.2 74716UNC 3/8 x 16 100 16 9.0 7.0 74718� DIN 376UNC No. 4 x 40 50 6 1.8 - 75704UNC No. 5 x 40 56 7 2.2 1.8 75705UNC No. 6 x 32 56 7 2.5 2.1 75706UNC No. 8 x 32 63 8 2.8 2.1 75708UNC No. 10 x 24 70 10 3.5 2.7 75710UNC No. 12 x 24 70 10 3.5 2.7 75712UNC 1/4 x 20 80 13 4.5 3.4 75714UNC 5/16 x 18 90 14 6.0 4.9 75716UNC 3/8 x 16 100 16 7.0 5.5 75718UNC 7/16 x 14 100 17 8.0 6.2 75720UNC 1/2 x 13 110 20 9.0 7.0 75722UNC 9/16 x 12 110 20 11.0 9.0 75724UNC 5/8 x 11 110 22 12.0 9.0 75726UNC 3/4 x 10 125 25 14.0 11.0 75730UNC 7/8 x 9 140 27 18.0 14.5 75734UNC 1" x 8 160 30 20.0 16.0 75738UNC 1.1/4 x 7 180 35 22.0 18.0 75746UNC 1.1/2 x 6 200 40 32.0 24.0 75754UNC 1.3/4 x 5 220 45 36.0 29.0 75762UNC 2" x 4.1/2 250 50 40.0 32.0 75770
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
10,2010,2010,2010,2010,2010,2010,2012,7014,00
10,2010,2010,2010,2010,2010,2010,2012,7014,0017,2017,2025,4025,4050,6061,4069,0088,00
193,00302,00430,00
Machine TapsUnified Coarse thread ANSI B 1.1
Maschi a macchinafilettatura unificata, serie grossa ANSI B1.1
� DIN 371/376 Form C/35° RSP HSS-E Tol. 2B
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori ciechi
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for blind holes
103
UNF
DIN 371 DIN 376
� DIN 371UNF No. 4 x 48 50 10 3.5 2.7 76504UNF No. 5 x 44 56 11 3.5 2.7 76505UNF No. 6 x 40 56 12 4.0 3.0 76506UNF No. 8 x 36 63 13 4.5 3.4 76508UNF No. 10 x 32 70 15 6.0 4.9 76510UNF No. 12 x 28 70 16 6.0 4.9 76512UNF 1/4 x 28 80 17 7.0 5.5 76514UNF 5/16 x 24 90 17 8.0 6.2 76516UNF 3/8 x 24 100 18 9.0 7.0 76518� DIN 376UNF 7/16 x 20 100 22 8.0 6.2 77520UNF 1/2 x 20 100 22 9.0 7.0 77522UNF 9/16 x 18 100 22 11.0 9.0 77524UNF 5/8 x 18 100 22 12.0 9.0 77526UNF 3/4 x 16 110 25 14.0 11.0 77530UNF 7/8 x 14 140 26 18.0 14.5 77534UNF 1" x 14 150 28 20.0 16.0 77540UNF 1" x 12 150 28 20.0 16.0 77538UNF 1.1/4 x 12 150 30 22.0 18.0 77546UNF 1.1/2 x 12 170 33 32.0 24.0 77554
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
8,208,208,208,208,208,208,20
10,40 11,20
13,8013,8021,0021,0040,5049,5056,0056,0077,00
161,00
Machine TapsUnified Fine thread ANSI B 1.1
Maschi a macchinafilettatura unificata, serie fina ANSI B1.1
� DIN 371/376 Form B HSS-E Tol. 2B
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through holes
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori passanti
104
UNF
DIN 371 DIN 376
� DIN 371UNF No. 4 x 48 50 6 3.5 2.7 76704UNF No. 5 x 44 56 7 3.5 2.7 76705UNF No. 6 x 40 56 7 4.0 3.0 76706UNF No. 8 x 36 63 8 4.5 3.4 76708UNF No. 10 x 32 70 10 6.0 4.9 76710UNF No. 12 x 28 70 10 6.0 4.9 76712UNF 1/4 x 28 80 10 7.0 5.5 76714UNF 5/16 x 24 90 10 8.0 6.2 76716UNF 3/8 x 24 100 10 9.0 7.0 76718� DIN 376UNF 7/16 x 20 100 13 8.0 6.2 77720UNF 1/2 x 20 100 13 9.0 7.0 77722UNF 9/16 x 18 100 15 11.0 9.0 77724UNF 5/8 x 18 100 15 12.0 9.0 77726UNF 3/4 x 16 110 17 14.0 11.0 77730UNF 7/8 x 14 140 17 18.0 14.5 77734UNF 1" x 14 150 20 20.0 16.0 77740UNF 1" x 12 150 20 20.0 16.0 77738UNF 1.1/4 x 12 150 22 22.0 18.0 77746UNF 1.1/2 x 12 170 25 32.0 24.0 77754
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
10,2010,2010,2010,2010,2010,2010,2012,7014,00
17,2017,2025,4025,4050,6061,4069,0069,0088,00
193,00
Machine TapsUnified Fine thread ANSI B 1.1
Maschi a macchinafilettatura unificata, serie fina ANSI B1.1
� DIN 371/376 Form C/35° RSP HSS-E Tol. 2B
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori ciechi
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for blind holes
105
UN
8-UNUN 1.1/16 x 8 138 48 20.0 16.0 83101UN 1.1/8 x 8 138 48 20.0 16.0 83102UN 1.3/16 x 8 151 51 22.4 18.0 83103UN 1.1/4 x 8 151 51 22.4 18.0 83104UN 1.5/16 x 8 162 57 25.0 20.0 83105UN 1.3/8 x 8 162 57 25.0 20.0 83106UN 1.1/2 x 8 170 60 28.0 22.4 83107UN 1.5/8 x 8 170 60 28.0 22.4 83108UN 1.3/4 x 8 187 67 31.5 25.0 83109UN 1.7/8 x 8 187 67 31.5 25.0 83110UN 2" x 8 200 70 35.5 28.0 83111UN 2.1/8 x 8 200 70 35.5 28.0 83112UN 2.1/4 x 8 221 76 40.0 31.5 83113UN 2.1/2 x 8 224 79 40.0 31.5 83115UN 2.3/4 x 8 234 79 45.0 35.5 83116UN 3" x 8 258 83 50.0 40.0 83117UN 3.1/4 x 8 261 86 50.0 40.0 83118UN 3.1/2 x 8 261 86 50.0 40.0 83119UN 3.3/4 x 8 279 89 56.0 45.0 83120UN 4" x 8 279 89 56.0 45.0 83121
12-UNUN 1.5/8 x 12 170 60 28.0 22.4 83301UN 1.3/4 x 12 187 67 31.5 25.0 83302UN 1.7/8 x 12 187 67 31.5 25.0 83303UN 2" x 12 200 70 35.5 28.0 83304UN 2.1/8 x 12 200 70 35.5 28.0 83305UN 2.1/4 x 12 221 76 40.0 31.5 83306UN 2.1/2 x 12 224 79 40.0 31.5 83308UN 2.3/4 x 12 234 79 45.0 35.5 83309UN 3" x 12 258 83 50.0 40.0 83310UN 3.1/4 x 12 261 86 50.0 40.0 83311UN 3.1/2 x 12 261 86 50.0 40.0 83312UN 3.3/4 x 12 279 89 56.0 45.0 83313UN 4" x 12 279 89 56.0 45.0 83314
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
58,0058,0068,0068,0085,0085,00
110,00130,00150,00230,00230,00456,00456,00665,00730,00820,00820,00960,00
1.190,001.190,00
130,00150,00230,00230,00456,00456,00665,00730,00820,00820,00960,00
1.190,001.190,00
Machine TapsUnified thread ANSI B 1.1
Maschi a macchinafilettatura unificata ANSI B1.1
ISO 529 Form B HSS-E Tol. 2B
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through holes
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori passanti
106
UN
8-UNUN 1.1/16 x 8 138 48 20.0 16.0 83151UN 1.1/8 x 8 138 48 20.0 16.0 83152UN 1.3/16 x 8 151 51 22.4 18.0 83153UN 1.1/4 x 8 151 51 22.4 18.0 83154UN 1.5/16 x 8 162 57 25.0 20.0 83155UN 1.3/8 x 8 162 57 25.0 20.0 83156UN 1.1/2 x 8 170 60 28.0 22.4 83157UN 1.5/8 x 8 170 60 28.0 22.4 83158UN 1.3/4 x 8 187 67 31.5 25.0 83159UN 1.7/8 x 8 187 67 31.5 25.0 83160UN 2" x 8 200 70 35.5 28.0 83161UN 2.1/8 x 8 200 70 35.5 28.0 83162UN 2.1/4 x 8 221 76 40.0 31.5 83163UN 2.1/2 x 8 224 79 40.0 31.5 83165UN 2.3/4 x 8 234 79 45.0 35.5 83166UN 3" x 8 258 83 50.0 40.0 83167UN 3.1/4 x 8 261 86 50.0 40.0 83168UN 3.1/2 x 8 261 86 50.0 40.0 83169UN 3.3/4 x 8 279 89 56.0 45.0 83170UN 4" x 8 279 89 56.0 45.0 83171
12-UNUN 1.5/8 x 12 170 60 28.0 22.4 83351UN 1.3/4 x 12 187 67 31.5 25.0 83352UN 1.7/8 x 12 187 67 31.5 25.0 83353UN 2" x 12 200 70 35.5 28.0 83354UN 2.1/8 x 12 200 70 35.5 28.0 83355UN 2.1/4 x 12 221 76 40.0 31.5 83356UN 2.1/2 x 12 224 79 40.0 31.5 83358UN 2.3/4 x 12 234 79 45.0 35.5 83359UN 3" x 12 258 83 50.0 40.0 83360UN 3.1/4 x 12 261 86 50.0 40.0 83361UN 3.1/2 x 12 261 86 50.0 40.0 83362UN 3.3/4 x 12 279 89 56.0 45.0 83363UN 4" x 12 279 89 56.0 45.0 83364
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
73,0073,0085,0085,00
106,50106,50138,00162,00187,00289,00289,00573,00573,00830,00920,00
1.020,001.020,001.200,001.500,001.500,00
162,00187,00289,00289,00573,00573,00830,00920,00
1.020,001.020,001.200,001.500,001.500,00
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Machine TapsUnified thread ANSI B 1.1
Maschi a macchinafilettatura unificata ANSI B1.1
ISO 529 Form C/35° RSP HSS-E Tol. 2B
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori ciechi
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for blind holes
107
UNEF
UNEF Nr.12 x 32 62 17 5.6 4.5 83320UNEF 1/4 x 32 66 19 6.3 5.0 83321UNEF 5/16 x 32 72 22 8.0 6.3 83322UNEF 3/8 x 32 80 24 10.0 8.0 83323UNEF 7/16 x 28 85 25 8.0 6.3 83324UNEF 1/2 x 28 89 29 9.0 7.1 83325UNEF 9/16 x 24 95 30 11.2 9.0 83326UNEF 5/8 x 24 102 32 12.5 10.0 83327UNEF 11/16 x 24 112 37 14.0 11.2 83328UNEF 3/4 x 20 112 37 14.0 11.2 83329UNEF 13/16 x 20 118 38 16.0 12.5 83330UNEF 7/8 x 20 118 38 16.0 12.5 83331UNEF 15/16 x 20 130 45 18.0 14.0 83332UNEF 1" x 20 130 45 18.0 14.0 83333UNEF 1.1/16 x 18 138 48 20.0 16.0 83334UNEF 1.1/8 x 18 138 48 20.0 16.0 83335UNEF 1.3/16 x 18 151 51 22.4 18.0 83336UNEF 1.1/4 x 18 151 51 22.4 18.0 83337UNEF 1.5/16 x 18 162 57 25.0 20.0 83338UNEF 1.3/8 x 18 162 57 25.0 20.0 83339UNEF 1.7/16 x 18 170 60 28.0 22.4 83340UNEF 1.1/2 x 18 170 60 28.0 22.4 83341UNEF 1.9/16 x 18 170 60 28.0 22.4 83342UNEF 1.5/8 x 18 170 60 28.0 22.4 83343UNEF 1.11/16 x 18 187 67 31.5 25.0 83344UNEF 1.3/4 x 18 187 67 31.5 25.0 83345UNEF 2" x 18 200 70 35.5 28.0 83346
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
8,407,509,40
10,7012,6012,6019,0019,4036,0036,0044,0044,0050,4050,4058,0058,0068,0068,0085,0085,00
110,00110,00130,00130,00150,00150,00230,00
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Machine TapsUnified Extra Fine thread ANSI B 1.1
Maschi a macchinafilettatura unificata, serie extra-fina ANSI B1.1
ISO 529 Form B HSS-E Tol. 2B
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through holes
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori passanti
108
UNEF
UNEF Nr. 12 x 32 62 17 5.6 4.5 83370UNEF 1/4 x 32 66 19 6.3 5.0 83371UNEF 5/16 x 32 72 22 8.0 6.3 83372UNEF 3/8 x 32 80 24 10.0 8.0 83373UNEF 7/16 x 28 85 25 8.0 6.3 83374UNEF 1/2 x 28 89 29 9.0 7.1 83375UNEF 9/16 x 24 95 30 11.2 9.0 83376UNEF 5/8 x 24 102 32 12.5 10.0 83377UNEF 11/16 x 24 112 37 14.0 11.2 83378UNEF 3/4 x 20 112 37 14.0 11.2 83379UNEF 13/16 x 20 118 38 16.0 12.5 83380UNEF 7/8 x 20 118 38 16.0 12.5 83381UNEF 15/16 x 20 130 45 18.0 14.0 83382UNEF 1" x 20 130 45 18.0 14.0 83383
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
10,409,30
11,8013,3015,7015,7023,5023,5045,0045,0055,0055,0063,0063,00
Maschine TapsUnified Extra Fine thread ANSI B 1.1
Maschi a macchinafilettatura unificata, serie extra-fina ANSI B1.1
ISO 529 Form C/35°RSP HSS-E Tol. 2B
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Applicazione: per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori ciechi
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for blind holes
109
UN
UNSUNS 1/4 x 24 66 19 6.3 5.0 83201UNS 1/4 x 36 66 19 6.3 5.0 83202UNS 1/4 x 40 66 19 6.3 5.0 83203UNS 3/8 x 27 80 24 10.0 8.0 83204UNS 7/16 x 24 85 25 8.0 6.3 83205UNS 1/2 x 24 89 29 9.0 7.1 83206UNS 5/8 x 27 102 32 12.5 10.0 83207UNS 3/4 x 24 112 37 14.0 11.2 83208UNS 7/8 x 18 118 38 16.0 12.5 83209UNS 1" x 14 130 45 18.0 14.0 83210
UNUN 5/16 x 28 72 22 8.0 6.3 83221UN 3/8 x 20 80 24 10.0 8.0 83222UN 3/8 x 28 80 24 10.0 8.0 83223UN 7/16 x 32 85 25 8.0 6.3 83224UN 1/2 x 32 89 29 9.0 7.1 83225UN 9/16 x 20 95 30 11.2 9.0 83226UN 9/16 x 28 95 30 11.2 9.0 83227UN 9/16 x 32 95 30 11.2 9.0 83228UN 5/8 x 20 102 32 12.5 10.0 83229UN 5/8 x 28 102 32 12.5 10.0 83230UN 11/16 x 20 112 37 14.0 11.2 83231UN 11/16 x 16 112 37 14.0 11.2 83232UN 1" x 32 130 45 18.0 14.0 83233
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
7,507,507,50
10,7012,6012,6019,4036,0044,0050,40
9,5010,7010,7012,6012,6019,0019,0019,0019,4019,4036,0036,0050,00
Machine TapsUnified thread ANSI B 1.1
Maschi a macchinafilettatura unificata ANSI B1.1
ISO 529 Form B HSS-E Tol. 2B
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through holes
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori passanti
110
G (BSP)
G 1/8 x 28 90 20 7.0 5.5 78412G 1/4 x 19 100 22 11.0 9.0 78414G 3/8 x 19 100 22 12.0 9.0 78416G 1/2 x 14 125 25 16.0 12.0 78418G 5/8 x 14 125 25 18.0 14.5 78420G 3/4 x 14 140 28 20.0 16.0 78422G 7/8 x 14 150 28 22.0 18.0 78424G 1" x 11 160 30 25.0 20.0 78426G 1.1/8 x 11 170 30 28.0 22.0 78430G 1.1/4 x 11 170 30 32.0 24.0 78434G 1.3/8 x 11 180 32 36.0 29.0 78438G 1.1/2 x 11 190 32 36.0 29.0 78442G 1.3/4 x 11 190 32 40.0 32.0 78450G 2" x 11 220 40 45.0 35.0 78454
TING 1/8 x 28 90 20 7.0 5.5 78413G 1/4 x 19 100 22 11.0 9.0 78415G 3/8 x 19 100 22 12.0 9.0 78417G 1/2 x 14 125 25 16.0 12.0 78419G 3/4 x 14 140 28 20.0 16.0 78423G 1" x 11 160 30 25.0 20.0 78427
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
12,7016,0020,0028,0032,0041,5048,8060,0083,50
113,00133,00157,50207,00216,00
19,2027,0035,9060,0084,70
126,00
Machine TapsPipe-thread DIN ISO 228
Maschi a macchinafilettatura per tubi gas DIN ISO 228
DIN 5156 Form C HSS-E
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Applicazione:per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori ciechirivestimento TIN- migliore resistenza all‘ abrasione e alla rottura- eccellente uniformità- possibile velocità di taglio superiore
Application:for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through and blind holesTIN-coating:- improved resistance to wear and abrasion- excellent anti-friction properties- faster cutting speeds possible
111
G (BSP)
G 1/8 x 28 90 20 7.0 5.5 78512G 1/4 x 19 100 22 11.0 9.0 78514G 3/8 x 19 100 22 12.0 9.0 78516G 1/2 x 14 125 25 16.0 12.0 78518G 5/8 x 14 125 25 18.0 14.5 78520G 3/4 x 14 140 28 20.0 16.0 78522G 7/8 x 14 150 28 22.0 18.0 78524G 1" x 11 160 30 25.0 20.0 78526G 1.1/8 x 11 170 30 28.0 22.0 78530G 1.1/4 x 11 170 30 32.0 24.0 78534G 1.3/8 x 11 180 32 36.0 29.0 78538G 1.1/2 x 11 190 32 36.0 29.0 78542G 1.3/4 x 11 190 32 40.0 32.0 78550G 2" x 11 220 40 45.0 35.0 78554
TING 1/8 x 28 90 20 7.0 5.5 78513G 1/4 x 19 100 22 11.0 9.0 78515G 3/8 x 19 100 22 12.0 9.0 78517G 1/2 x 14 125 25 16.0 12.0 78519G 3/4 x 14 140 28 20.0 16.0 78523G 1" x 11 160 30 25.0 20.0 78527
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
13,3016,8020,0029,4033,6043,8054,5067,7099,50
120,00156,00169,00246,00252,00
19,8027,8035,9061,4087,00
133,70
Machine TapsPipe-thread DIN ISO 228
Maschi a macchinafilettatura per tubi gas DIN ISO 228
DIN 5156 Form C HSS-E
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Application:for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through holesTIN-coating:- improved resistance to wear and abrasion- excellent anti-friction properties- faster cutting speeds possible
Applicazione:per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori passantirivestimento TIN- migliore resistenza all‘ abrasione e alla rottura- eccellente uniformità- possibile velocità di taglio superiore
112
G (BSP)
G 1/8 x 28 90 20 7.0 5.5 78712G 1/4 x 19 100 22 11.0 9.0 78714G 3/8 x 19 100 22 12.0 9.0 78716G 1/2 x 14 125 25 16.0 12.0 78718G 5/8 x 14 125 25 18.0 14.5 78720G 3/4 x 14 140 28 20.0 16.0 78722G 7/8 x 14 150 28 22.0 18.0 78724G 1" x 11 160 30 25.0 20.0 78726G 1.1/8 x 11 170 30 28.0 22.0 78730G 1.1/4 x 11 170 30 32.0 24.0 78734G 1.3/8 x 11 180 32 36.0 29.0 78738G 1.1/2 x 11 190 32 36.0 29.0 78742G 1.3/4 x 11 190 32 40.0 32.0 78750G 2" x 11 220 40 45.0 35.0 78754
TING 1/8 x 28 90 20 7.0 5.5 78713G 1/4 x 19 100 22 11.0 9.0 78715G 3/8 x 19 100 22 12.0 9.0 78717G 1/2 x 14 125 25 16.0 12.0 78719G 3/4 x 14 140 28 20.0 16.0 78723G 1" x 11 160 30 25.0 20.0 78727
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
15,0019,3024,0033,6038,9050,4059,3073,50
107,00136,50165,00191,00251,00258,00
21,5030,3039,9065,6093,60
139,50
Machine TapsPipe-thread DIN ISO 228
Maschi a macchinafilettatura per tubi gas DIN ISO 228
DIN 5156 Form C/35° RSP HSS-E
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Applicazione:per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori ciechirivestimento TIN- migliore resistenza all‘ abrasione e alla rottura- eccellente uniformità- possibile velocità di taglio superiore
Application:for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for blind holesTIN-coating:- improved resistance to wear and abrasion- excellent anti-friction properties- faster cutting speeds possible
113
Rc (BSPT)
Rc 1/8 x 28 90 20 7.0 5.5 73404Rc 1/4 x 19 100 22 11.0 9.0 73406Rc 3/8 x 19 100 22 12.0 9.0 73408Rc 1/2 x 14 125 28 16.0 12.0 73410Rc 3/4 x 14 140 28 20.0 16.0 73412Rc 1" x 11 160 38 25.0 20.0 73414
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
16,0020,0025,0035,0053,0076,00
Machine Tapstapered pipe thread, taper 1:16, con. 55°
Maschi a macchinafilettatura conica per tubi, cono 1:16
DIN 5156 Form C HSS-E
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through and blind holes
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori passanti e ciechi
114
NPT
NPT 1/16 x 27 90 20 6.0 4.9 73432NPT 1/8 x 27 90 20 7.0 5.5 73434NPT 1/4 x 18 100 22 11.0 9.0 73436NPT 3/8 x 18 100 22 12.0 9.0 73438NPT 1/2 x 14 125 28 16.0 12.0 73440NPT 3/4 x 14 140 28 20.0 16.0 73442NPT 1" x 11.5 160 38 25.0 20.0 73444
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
21,2016,0020,0025,0035,0053,0076,00
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Machine Tapsamerican tapered pipe thread, taper 1:16
Maschi a macchinafilettatura americana conica per tubi, cono 1:16
Form C HSS-E
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through and blind holes
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori passanti e ciechi
115
Rd
Rd 8 x 1/10 90 26 6.0 4.9 79440Rd 9 x 1/10 90 26 7.0 5.5 79441Rd 10 x 1/10 100 28 7.0 5.5 79442Rd 11 x 1/10 100 28 8.0 6.2 79443Rd 12 x 1/10 110 28 9.0 7.0 79444Rd 14 x 1/8 110 32 11.0 9.0 79445Rd 16 x 1/8 110 32 12.0 9.0 79446Rd 18 x 1/8 125 32 14.0 11.0 79447Rd 20 x 1/8 140 32 16.0 12.0 79448Rd 22 x 1/8 140 32 18.0 14.5 79449Rd 24 x 1/8 160 34 18.0 14.5 79450Rd 26 x 1/8 160 36 20.0 16.0 79451Rd 28 x 1/8 160 36 20.0 16.0 79452Rd 30 x 1/8 180 36 22.0 18.0 79453Rd 32 x 1/8 180 36 25.0 20.0 79454Rd 34 x 1/8 200 36 28.0 22.0 79455Rd 36 x 1/8 200 36 28.0 22.0 79456Rd 38 x 1/8 200 38 28.0 22.0 79457Rd 40 x 1/6 200 50 32.0 24.0 79458Rd 42 x 1/6 200 50 32.0 24.0 79459Rd 44 x 1/6 200 50 36.0 29.0 79460
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
70,0070,0070,0085,0095,00
120,00125,00150,00150,00195,00235,00275,00295,00310,00415,00470,00475,00550,00650,00750,00900,00
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Machine TapsKnuckle thread DIN 405
Maschi a macchinafilettatura rotunda DIN 405
DIN 374 Form C HSS-E Tol. 7H
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through and blind holes
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori passanti e ciechi
116
FG
FG 2 x 56 45 8 2.8 2.1 79401FG 2.3 x 56 45 8 2.8 2.1 79402FG 2.6 x 56 56 8 3.5 2.7 79403FG 6.35 x 26 80 14 7.0 5.5 79404FG 7.9 x 26 90 16 8.0 6.2 79405FG 9.5 x 26 90 16 7.0 5.5 79406FG 14.3 x 20 100 22 11.0 9.0 79407FG 14.3 x 20 - LH 100 22 11.0 9.0 79408FG 25.4 x 24 140 24 18.0 14.5 79409
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
80,0080,0080,0070,0075,0075,0080,0090,00
130,00
Nennmaß L 1 L 2 D 2 Art.-No.D
Machine TapsCycle thread DIN 79012
Maschi a macchinafilettatura per biciclette DIN 79012
DIN 374 Form C HSS-E Tol. medium
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through and blind holes
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori passanti e ciechi
117
BSC
BSC 1/4 x 26 80 14 7.0 5.5 79420BSC 5/16 x 26 90 16 8.0 6.2 79421BSC 3/8 x 26 90 16 7.0 5.5 79422BSC 9/16 x 20 100 22 11.0 9.0 79423BSC 9/16 x 20 - LH 100 22 11.0 9.0 79424BSC 1" x 24 140 24 18.0 14.5 79425
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
70,0075,0080,0080,0090,00
130,00
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Machine TapsCycle thread BS 811
Maschi a macchinafilettatura inglese per biciclette BS 811
DIN 374 Form C HSS-E Tol. medium
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through and blind holes
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori passanti e ciechi
118
Vg
Vg 5 x 36 70 12 6.0 4.9 79430Vg 5.2 x 24 80 17 6.0 4.9 79431Vg 6 x 32 80 14 7.0 5.5 79432Vg 8 x 32 80 16 8.0 6.2 79433Vg 10 x 28 90 18 8.0 6.2 79434Vg 12 x 26 100 22 9.0 7.0 79435
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
65,0065,0072,5074,0080,0090,00
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through and blind holes
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori passanti e ciechi
Machine TapsValve thread DIN 7756
Maschi a macchinafilettatura per valvole DIN 7756
DIN 374 Form C HSS-E Tol. medium
119
M
DIN 371 DIN 376
DIN 371M 3 x 0.5 56 11 3.5 2.7 33426M 4 x 0.7 63 13 4.5 3.4 33430M 5 x 0.8 70 16 6.0 4.9 33434M 6 x 1.0 80 19 6.0 4.9 33438M 8 x 1.25 90 22 8.0 6.2 33442M 10 x 1.5 100 24 10.0 8.0 33446DIN 376M 12 x 1.75 110 29 9.0 7.0 34450M 14 x 2.0 110 30 11.0 9.0 34454M 16 x 2.0 110 32 12.0 9.0 34458M 18 x 2.5 125 34 14.0 11.0 34462M 20 x 2.5 140 34 16.0 12.0 34466M 22 x 2.5 140 34 18.0 14.5 34470M 24 x 3.0 160 38 18.0 14.5 34474
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
9,209,209,609,60
11,5013,10
15,6023,1026,2035,7050,4052,5054,60
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Machine Taps, Left Handmetric ISO-thread DIN 13
Maschi a macchina, filetto sinistrofilettatura metrica ISO DIN 13
DIN 371/376 Form C HSS-E Tol. ISO2/6H
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through and blind holes
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori passanti e ciechi
120
M
DIN 371 DIN 376
DIN 371M 3 x 0.5 56 11 3.5 2.7 33526M 4 x 0.7 63 13 4.5 3.4 33530M 5 x 0.8 70 16 6.0 4.9 33534M 6 x 1.0 80 19 6.0 4.9 33538M 7 x 1.0 80 19 7.0 5.5 33540M 8 x 1.25 90 22 8.0 6.2 33542M 10 x 1.5 100 24 10.0 8.0 33546DIN 376M 3 x 0.5 56 11 2.2 — 34526M 4 x 0.7 63 13 2.8 2.1 34530M 5 x 0.8 70 16 3.5 2.7 34534M 6 x 1.0 80 19 4.5 3.4 34538M 8 x 1.25 90 22 6.0 4.9 34542M 10 x 1.5 100 24 7.0 5.5 34546M 12 x 1.75 110 29 9.0 7.0 34550M 14 x 2.0 110 30 11.0 9.0 34554M 16 x 2.0 110 32 12.0 9.0 34558M 18 x 2.5 125 34 14.0 11.0 34562M 20 x 2.5 140 34 16.0 12.0 34566M 22 x 2.5 140 34 18.0 14.5 34570M 24 x 3.0 160 38 18.0 14.5 34574M 27 x 3.0 160 38 20.0 16.0 34576M 30 x 3.5 180 45 22.0 18.0 34578M 33 x 3.5 180 50 25.0 20.0 34580M 36 x 4.0 200 56 28.0 22.0 34582M 39 x 4.0 200 60 32.0 24.0 34584M 42 x 4.5 200 60 32.0 24.0 34586M 45 x 4.5 220 65 36.0 29.0 34588M 48 x 5.0 250 70 36.0 29.0 34590M 52 x 5.0 250 70 40.0 32.0 34592
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
10,5010,5010,9010,9014,2013,3015,00
10,5010,5010,9010,9013,3015,0018,9024,0027,8037,8053,5058,8063,00
104,00109,00148,00248,00312,00371,00409,00451,00535,00
Machine Taps, Left Handmetric ISO-thread DIN 13
Maschi a macchina, filetto sinistrofilettatura metrica ISO DIN 13
DIN 371/376 Form B HSS-E Tol. ISO2/6H
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through holes
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori passanti
121
M
DIN 371 DIN 376
DIN 371M 3 x 0.5 56 6 3.5 2.7 33726M 4 x 0.7 63 7 4.5 3.4 33730M 5 x 0.8 70 8 6.0 4.9 33734M 6 x 1.0 80 10 6.0 4.9 33738M 8 x 1.25 90 14 8.0 6.2 33742M 10 x 1.5 100 16 10.0 8.0 33746DIN 376M 3 x 0.5 56 6 2.2 — 34726M 4 x 0.7 63 7 2.8 2.1 34730M 5 x 0.8 70 8 3.5 2.7 34734M 6 x 1.0 80 10 4.5 3.4 34738M 8 x 1.25 90 14 6.0 4.9 34742M 10 x 1.5 100 16 7.0 5.5 34746M 12 x 1.75 110 18 9.0 7.0 34750M 14 x 2.0 110 20 11.0 9.0 34754M 16 x 2.0 110 22 12.0 9.0 34758M 18 x 2.5 125 25 14.0 11.0 34762M 20 x 2.5 140 25 16.0 12.0 34766M 22 x 2.5 140 27 18.0 14.5 34770M 24 x 3.0 160 30 18.0 14.5 34774M 27 x 3.0 160 30 20.0 16.0 34776M 30 x 3.5 180 35 22.0 18.0 34778M 33 x 3.5 180 35 25.0 20.0 34780M 36 x 4.0 200 40 28.0 22.0 34782M 39 x 4.0 200 40 32.0 24.0 34784M 42 x 4.5 200 45 32.0 24.0 34786M 45 x 4.5 220 45 36.0 29.0 34788M 48 x 5.0 250 50 36.0 29.0 34790M 52 x 5.0 250 50 40.0 32.0 34792
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
12,3012,3013,1013,1015,7017,90
12,3012,3013,1013,1015,7017,9020,4026,0030,0040,0057,0064,0066,00
113,00117,00162,00274,00336,00393,00446,00487,00567,00
Machine Taps, Left Handmetric ISO-thread DIN 13
Maschi a macchina, filetto sinistrofilettatura metrica ISO DIN 13
DIN 371/376 Form C/35°SP HSS-E Tol. ISO2/6H
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Applicazione: per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori ciechi
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for blind holes
122
Mf
M 3 x 0.35 56 9 2.2 - 34801M 4 x 0.35 63 10 2.8 2.1 34802M 4 x 0.5 63 10 2.8 2.1 34803M 5 x 0.5 70 12 3.5 2.7 34804M 5 x 0.75 70 12 3.5 2.7 34805M 6 x 0.5 80 14 4.5 3.4 34806M 6 x 0.75 80 14 4.5 3.4 34807M 7 x 0.75 80 14 5.5 4.3 34808M 8 x 0.5 80 19 6.0 4.9 34809M 8 x 0.75 80 19 6.0 4.9 34810M 8 x 1.0 90 22 6.0 4.9 34811M 9 x 0.75 80 19 7.0 5.5 34812M 9 x 1.0 90 22 7.0 5.5 34813M 10 x 0.75 90 20 7.0 5.5 34814M 10 x 1.0 90 20 7.0 5.5 34815M 10 x 1.25 100 24 7.0 5.5 34816M 11 x 1.0 90 20 8.0 6.2 34817M 11 x 1.25 90 22 8.0 6.2 34818M 12 x 0.75 100 22 9.0 7.0 34819M 12 x 1.0 100 22 9.0 7.0 34820M 12 x 1.25 100 22 9.0 7.0 34821M 12 x 1.5 100 22 9.0 7.0 34822M 13 x 1.0 100 22 11.0 9.0 34823M 13 x 1.5 100 22 11.0 9.0 34824M 14 x 0.75 100 22 11.0 9.0 34825M 14 x 1.0 100 22 11.0 9.0 34826M 14 x 1.25 100 22 11.0 9.0 34827M 14 x 1.5 100 22 11.0 9.0 34828M 15 x 1.0 100 22 12.0 9.0 34829M 15 x 1.5 100 22 12.0 9.0 34830M 16 x 1.0 100 22 12.0 9.0 34831M 16 x 1.25 100 22 12.0 9.0 34832M 16 x 1.5 100 22 12.0 9.0 34833M 18 x 1.0 110 25 14.0 11.0 34834M 18 x 1.25 110 25 14.0 11.0 34835M 18 x 1.5 110 25 14.0 11.0 34836M 18 x 2.0 125 34 14.0 11.0 34837
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
25,0025,0025,0025,0025,0025,0025,0025,0025,0025,0025,0025,0025,0027,8027,8027,8038,8038,8038,8038,8038,8038,8047,2047,2047,2047,2047,2047,2054,8054,8054,8054,8054,8065,6065,6065,6065,60
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Machine Taps, Left Handmetric-fine ISO-thread DIN 13
Maschi a macchina, filetto sinistrofilettatura metrica fine ISO DIN 13
DIN 374 Form B HSS-E Tol. ISO2/6H
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through holes
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori passanti
123
Mf
M 20 x 1.0 125 25 16.0 12.0 34838M 20 x 1.25 125 25 16.0 12.0 34839M 20 x 1.5 125 25 16.0 12.0 34840M 20 x 2.0 140 34 16.0 12.0 34841M 21 x 1.5 125 25 16.0 12.0 34842M 22 x 1.0 125 25 18.0 14.5 34843M 22 x 1.25 125 25 18.0 14.5 34844M 22 x 1.5 125 25 18.0 14.5 34845M 22 x 2.0 140 34 18.0 14.5 34846M 23 x 1.5 125 25 18.0 14.5 34847M 24 x 1.0 140 28 18.0 14.5 34848M 24 x 1.25 140 28 18.0 14.5 34849M 24 x 1.5 140 28 18.0 14.5 34850M 24 x 2.0 140 28 18.0 14.5 34851M 25 x 1.0 140 28 18.0 14.5 34852M 25 x 1.5 140 28 18.0 14.5 34853M 26 x 1.0 140 28 18.0 14.5 3485XM 26 x 1.5 140 28 18.0 14.5 34854M 26 x 2.0 140 28 18.0 14.5 34855M 27 x 1.0 140 28 20.0 16.0 34800M 27 x 1.5 140 28 20.0 16.0 34856M 27 x 2.0 140 28 20.0 16.0 34857M 28 x 1.0 140 28 20.0 16.0 34858M 28 x 1.5 140 28 20.0 16.0 34859M 28 x 2.0 140 28 20.0 16.0 34860M 29 x 1.5 150 28 22.0 18.0 34861M 30 x 1.0 150 28 22.0 18.0 34862M 30 x 1.5 150 28 22.0 18.0 34863M 30 x 2.0 150 28 22.0 18.0 34864M 30 x 2.5 180 45 22.0 18.0 3486XM 30 x 3.0 180 45 22.0 18.0 34865M 32 x 1.5 150 28 22.0 18.0 34866M 32 x 2.0 150 28 22.0 18.0 34867M 32 x 3.0 180 50 22.0 18.0 34892M 33 x 1.5 160 30 25.0 20.0 34893M 33 x 2.0 160 30 25.0 20.0 34868M 33 x 3.0 180 50 25.0 20.0 34869
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
71,9071,9071,9071,9071,9090,3090,3090,3090,30
105,50105,50105,50105,50105,50105,50105,50105,50105,50105,50132,00132,00132,00132,00132,00132,00151,00151,00151,00151,00151,00151,00186,00186,00186,00186,00186,00186,00
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Machine Taps, Left Handmetric-fine ISO-thread DIN 13
Maschi a macchina, filetto sinistrofilettatura metrica fine ISO DIN 13
DIN 374 Form B HSS-E Tol. ISO2/6H
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through holes
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori passanti
124
Mf
M 34 x 1.5 170 30 28.0 22.0 34870M 34 x 2.0 170 30 28.0 22.0 34871M 35 x 1.5 170 30 28.0 22.0 34872M 36 x 1.5 170 30 28.0 22.0 34873M 36 x 2.0 170 30 28.0 22.0 34874M 36 x 3.0 200 56 28.0 22.0 34875M 38 x 1.5 170 30 28.0 22.0 34876M 39 x 1.5 170 30 32.0 24.0 34877M 39 x 2.0 170 30 32.0 24.0 34878M 39 x 3.0 200 60 32.0 24.0 34879M 40 x 1.5 170 30 32.0 24.0 34880M 40 x 2.0 170 30 32.0 24.0 34881M 40 x 3.0 200 60 32.0 24.0 34882M 42 x 1.5 170 30 32.0 24.0 34883M 42 x 2.0 170 30 32.0 24.0 34884M 42 x 3.0 200 60 32.0 24.0 34885M 45 x 1.5 180 32 36.0 29.0 34886M 45 x 2.0 180 32 36.0 29.0 34887M 45 x 3.0 200 50 36.0 29.0 34888M 48 x 1.5 190 32 36.0 29.0 34889M 48 x 2.0 190 32 36.0 29.0 34890M 48 x 3.0 225 50 36.0 29.0 34891M 50 x 1.5 190 32 36.0 29.0 34894M 50 x 2.0 190 32 36.0 29.0 34895M 50 x 3.0 225 50 36.0 29.0 34896M 52 x 1.5 190 32 40.0 32.0 34897M 52 x 2.0 190 32 40.0 32.0 34898M 52 x 3.0 225 50 40.0 32.0 34899
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
186,00186,00186,00234,00234,00234,00247,00247,00247,00247,00269,00269,00269,00301,00301,00301,00357,00357,00357,00430,00430,00430,00498,00498,00498,00551,00551,00551,00
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Machine Taps, Left Handmetric-fine ISO-thread DIN 13
Maschi a macchina, filetto sinistrofilettatura metrica fine ISO DIN 13
DIN 374 Form B HSS-E Tol. ISO2/6H
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through holes
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori passanti
125
Mf
M 3 x 0.35 56 5 2.2 - 34901M 4 x 0.35 63 5 2.8 2.1 34902M 4 x 0.5 63 5 2.8 2.1 34903M 5 x 0.5 70 5 3.5 2.7 34904M 5 x 0.75 70 8 3.5 2.7 34905M 6 x 0.5 80 5 4.5 3.4 34906M 6 x 0.75 80 8 4.5 3.4 34907M 7 x 0.75 80 8 5.5 4.3 34908M 8 x 0.5 80 8 6.0 4.9 34909M 8 x 0.75 80 8 6.0 4.9 34910M 8 x 1.0 90 10 6.0 4.9 34911M 9 x 0.75 80 10 7.0 5.5 34912M 9 x 1.0 90 10 7.0 5.5 34913M 10 x 0.75 90 10 7.0 5.5 34914M 10 x 1.0 90 10 7.0 5.5 34915M 10 x 1.25 100 16 7.0 5.5 34916M 11 x 1.0 90 11 8.0 6.2 34917M 11 x 1.25 90 14 8.0 6.2 34918M 12 x 0.75 100 10 9.0 7.0 34919M 12 x 1.0 100 11 9.0 7.0 34920M 12 x 1.25 100 15 9.0 7.0 34921M 12 x 1.5 100 15 9.0 7.0 34922M 13 x 1.0 100 11 11.0 9.0 34923M 13 x 1.5 100 15 11.0 9.0 34924M 14 x 0.75 100 10 11.0 9.0 34925M 14 x 1.0 100 11 11.0 9.0 34926M 14 x 1.25 100 15 11.0 9.0 34927M 14 x 1.5 100 15 11.0 9.0 34928M 15 x 1.0 100 12 12.0 9.0 34929M 15 x 1.5 100 15 12.0 9.0 34930M 16 x 1.0 100 12 12.0 9.0 34931M 16 x 1.25 100 15 12.0 9.0 34932M 16 x 1.5 100 15 12.0 9.0 34933M 18 x 1.0 110 13 14.0 11.0 34934M 18 x 1.25 110 15 14.0 11.0 34935M 18 x 1.5 110 17 14.0 11.0 34936M 18 x 2.0 125 20 14.0 11.0 34937
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
27,8027,8027,8027,8027,8027,8027,8027,8027,8027,8027,8027,8027,8033,6033,6033,6043,0043,0043,0043,0043,0043,0052,5052,5052,5052,5052,5052,5060,3060,3060,3060,3060,3074,5074,5074,5074,50
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Machine Taps, Left Handmetric-fine ISO-thread DIN 13
Maschi a macchina, filetto sinistrofilettatura metrica fine ISO DIN 13
DIN 374 Form C/35° SP HSS-E Tol. ISO2/6H
Applicazione: per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori ciechi
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for blind holes
126
Mf
M 20 x 1.0 125 14 16.0 12.0 34938M 20 x 1.25 125 17 16.0 12.0 34939M 20 x 1.5 125 17 16.0 12.0 34940M 20 x 2.0 140 20 16.0 12.0 34941M 21 x 1.5 125 17 16.0 12.0 34942M 22 x 1.0 125 14 18.0 14.5 34943M 22 x 1.25 125 17 18.0 14.5 34944M 22 x 1.5 125 17 18.0 14.5 34945M 22 x 2.0 140 20 18.0 14.5 34946M 23 x 1.5 125 17 18.0 14.5 34947M 24 x 1.0 140 15 18.0 14.5 34948M 24 x 1.25 140 17 18.0 14.5 34949M 24 x 1.5 140 20 18.0 14.5 34950M 24 x 2.0 140 20 18.0 14.5 34951M 25 x 1.0 140 15 18.0 14.5 34952M 25 x 1.5 140 20 18.0 14.5 34953M 26 x 1.0 140 15 18.0 14.5 3495XM 26 x 1.5 140 20 18.0 14.5 34954M 26 x 2.0 140 20 18.0 14.5 34955M 27 x 1.0 140 15 20.0 16.0 34900M 27 x 1.5 140 20 20.0 16.0 34956M 27 x 2.0 140 20 20.0 16.0 34957M 28 x 1.0 140 15 20.0 16.0 34958M 28 x 1.5 140 20 20.0 16.0 34959M 28 x 2.0 140 20 20.0 16.0 34960M 29 x 1.5 150 22 22.0 18.0 34961M 30 x 1.0 150 17 22.0 18.0 34962M 30 x 1.5 150 22 22.0 18.0 34963M 30 x 2.0 150 22 22.0 18.0 34964M 30 x 2.5 180 27 22.0 18.0 3496XM 30 x 3.0 180 30 22.0 18.0 34965M 32 x 1.5 150 22 22.0 18.0 34966M 32 x 2.0 150 22 22.0 18.0 34967M 32 x 3.0 180 30 22.0 18.0 34992M 33 x 1.5 160 24 25.0 20.0 34993M 33 x 2.0 160 24 25.0 20.0 34968M 33 x 3.0 180 30 25.0 20.0 34969
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
83,4083,4083,4083,4083,40
100,00100,00100,00100,00120,00120,00120,00120,00120,00120,00120,00120,00120,00120,00145,00145,00145,00145,00145,00145,00165,00165,00165,00165,00165,00165,00206,00206,00206,00206,00206,00206,00
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Machine Taps, Left Handmetric-fine ISO-thread DIN 13
Maschi a macchina, filetto sinistrofilettatura metrica fine ISO DIN 13
DIN 374 Form C/35° SP HSS-E Tol. ISO2/6H
Applicazione: per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori ciechi
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for blind holes
127
Mf
M 34 x 1.5 170 24 28.0 22.0 34970M 34 x 2.0 170 24 28.0 22.0 34971M 35 x 1.5 170 24 28.0 22.0 34972M 36 x 1.5 170 24 28.0 22.0 34973M 36 x 2.0 170 24 28.0 22.0 34974M 36 x 3.0 200 30 28.0 22.0 34975M 38 x 1.5 170 24 28.0 22.0 34976M 39 x 1.5 170 25 32.0 24.0 34977M 39 x 2.0 170 25 32.0 24.0 34978M 39 x 3.0 200 30 32.0 24.0 34979M 40 x 1.5 170 25 32.0 24.0 34980M 40 x 2.0 170 25 32.0 24.0 34981M 40 x 3.0 200 30 32.0 24.0 34982M 42 x 1.5 170 25 32.0 24.0 34983M 42 x 2.0 170 25 32.0 24.0 34984M 42 x 3.0 200 30 32.0 24.0 34985M 45 x 1.5 180 27 36.0 29.0 34986M 45 x 2.0 180 27 36.0 29.0 34987M 45 x 3.0 200 30 36.0 29.0 34988M 48 x 1.5 190 27 36.0 29.0 34989M 48 x 2.0 190 27 36.0 29.0 34990M 48 x 3.0 225 33 36.0 29.0 34991M 50 x 1.5 190 27 36.0 29.0 34994M 50 x 2.0 190 27 36.0 29.0 34995M 50 x 3.0 225 33 36.0 29.0 34996M 52 x 1.5 190 27 40.0 32.0 34997M 52 x 2.0 190 27 40.0 32.0 34998M 52 x 3.0 225 33 40.0 32.0 34999
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
206,00206,00206,00260,00260,00260,00273,00273,00273,00273,00297,00297,00297,00336,00336,00336,00394,00394,00394,00470,00470,00470,00548,00548,00548,00601,00601,00601,00
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Machine Taps, Left Handmetric-fine ISO-thread DIN 13
Maschi a macchina, filetto sinistrofilettatura metrica fine ISO DIN 13
DIN 374 Form C/35° SP HSS-E Tol. ISO2/6H
Applicazione: per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori ciechi
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for blind holes
128
G (BSP)
G 1/8 x 28 90 20 7.0 5.5 78202G 1/4 x 19 100 22 11.0 9.0 78203G 3/8 x 19 100 22 12.0 9.0 78204G 1/2 x 14 125 25 16.0 12.0 78205G 5/8 x 14 125 25 18.0 14.5 78206G 3/4 x 14 140 28 20.0 16.0 78207G 1" x 11 160 30 25.0 20.0 78209
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
19,0023,5029,5041,5048,0061,0090,00
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Machine Taps, Left HandPipe-thread DIN ISO 228
Maschi a macchina, filetto sinistrofilettatura per tubi gas DIN ISO 228
DIN 5156 Form C HSS-E
Application:
for general use- non abrasive material up to 900 N/mm² - unalloyed and low alloyed steel- for through and blind holes
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 900 N/mm²- Acciaio non legati e scarsamente legati- per fori passanti e ciechi
129
because available because reliable because you
Form B/A/C 39°RSP TwinBox
132 133 147
PM 134 135
136 137 148
138 140 149
142
145
143
144
MACHINE TAPS WITH COLOURED RING MASCHI A MACCHINA CON COLLARINI COLORATI
for general useper uso universale
for general useper uso universale
for wear resistant steelAcciaio resistente all’abrasione
for stainless steelAcciaio inossidabile
for cast ironGhisa grigia
Material from 1200 N/mm2 tensile strengthMateriali con resistenza alla trazione da 1.200 N/mm²
for aluminium alloysAlluminio
for brassOttone
130
S/E 10-20
S/E 6-15
S 4- 8
S 4- 8
S 4- 8
S 2- 5
S 2- 5
S 5-10
S 5-10
P/T 6-20
P/T 6-20
E 6-12
E 20-30
S/E 10-15
S/E 6-15
S/E 6-15
S/E 10-15
S/E 15-30
E 10-20
S/E 10-15
E/T 10-20
S 3- 4
S 3- 4
E/T 5-15
T 5-15
RECOMMENDED APPLICATION OF COLOURED RING MACHINE TAPSAPPLICAZIONE RACCOMANDATA PER MASCHI A MACCHINA CON COLLARINI COLORATI
MaterialMateriali
Lubricantlubrificante
CuttingSpeed
velocita di taglio m/min.
Steel, unalloyed and low alloyed, short-chippingAcciaio non legati e scarsamente legati, truciolo corto
non abrasive Material, short-chippingMateriali buona truciodibilità, truciolo corto
Steel, heat resistant, long-chippingAcciaio resistenti al calore, truciolo lungo
Steel, heat resistant, short-chipping Acciaio resistenti al calore, truciolo corto
Steel, cementation and heat treatable, short-chippingAcciaio da cementazione, Acciao bonificato, truciolo corto
Steel, Tool Steel up to 1200 N/mm²Acciao, Acciaio utensili a 1.200 N/mm²
Steel, Tool Steel over 1200 N/mm²Acciao, Acciaio utensili da 1.200 N/mm²
Steel stainless, short-chippingAcciaio inossidabile, truciolo corto
Steel stainless, long-chippingAcciaio inossidabile, truciolo lungo
Iron, CastGhisa grigia
Iron, spheroidal graphiteGhisa sferoidale
Iron, Malleable CastGhisa temprata
Brass, short-chippingOttone, truciolo corto
Brass, long-chippingOttone, truciolo lungo
Bronze, short-chippingBronzo, truciolo corto
Bronze, long-chippingBronzo, truciolo lungo
CopperRame
Aluminium-alloys, short-chippingAlluminio, truciolo corto
Aluminium-alloys, long-chippingAlluminio, truciolo lungo
Zinc AlloysLeghe forgiate
Magnesium AlloysLeghe di magnesio
Titanium, short-chippingTitanio, truciolo corto
Titanium, long-chippingTitanio, truciolo lungo
Plastics, thermoplasticsMateriali plastici, materiali termoplastici
Plastics, thermosettingMateriali plastici, materiali termodurenti
S = cutting oil / olii da taglio E = oil emulsion / emulsione P = kerosene / petrolio T = dry / secco
131
PM
PM
PM
PM
PM
PM
PM
PM
PM
PM
PM
PM
PM
PM
PM
RECOMMENDED APPLICATION OF COLOURED RING MACHINE TAPSAPPLICAZIONE RACCOMANDATA PER MASCHI A MACCHINA CON COLLARINI COLORATI
Material
Green Ring
collarinoverde
Blue Ring
collarinoblu
White Ring
collarinobianco
Black Ring
collarinonero
RedRing
collarinorosso
Yellow Ring
collarino giallo
OrangeRing
collarinoarancione
Steel, unalloyed and low alloyed, short-chippingAcciaio non legati e scarsamente legati, truciolo corto
non abrasive Material, short-chippingMateriali buona truciodibilità, truciolo corto
Steel, heat resistant, long-chippingAcciaio resistenti al calore, truciolo lungo
Steel, heat resistant, short-chippingAcciaio resistenti al calore, truciolo corto
Steel, cementation and heat treatable, short-chippingAcciaio da cementazione, Acciao bonificato, truciolo corto
Steel, Tool Steel up to 1200 N/mm²Acciao, Acciaio utensili a 1.200 N/mm²
Steel, Tool Steel over 1200 N/mm²Acciao, Acciaio utensili da 1.200 N/mm²
Steel stainless, short-chippingAcciaio inossidabile, truciolo corto
Steel stainless, long-chippingAcciaio inossidabile, truciolo lungo
Iron, CastGhisa grigia
Iron, spheroidal graphiteGhisa sferoidale
Iron, Malleable CastGhisa temprata
Brass, short-chippingOttone, truciolo corto
Brass, long-chippingOttone, truciolo lungo
Bronze, short-chippingBronzo, truciolo corto
Bronze, long-chippingBronzo, truciolo lungo
CopperRame
Aluminium-alloys, short-chippingAlluminio, truciolo corto
Aluminium-alloys, long-chippingAlluminio, truciolo lungo
Zinc AlloysLeghe forgiate
Magnesium AlloysLeghe di magnesio
Titanium, short-chippingTitanio, truciolo corto
Titanium, long-chippingTitanio, truciolo lungo
Plastics, thermoplasticsMateriali plastici, materiali termoplastici
Plastics, thermosettingMateriali plastici, materiali termodurenti
132
DIN 371 DIN 376
DIN 371M 3 x 0.5 56 11 3.5 2.7 35326M 4 x 0.7 63 13 4.5 3.4 35330M 5 x 0.8 70 16 6.0 4.9 35334M 6 x 1.0 80 19 6.0 4.9 35338M 8 x 1.25 90 22 8.0 6.2 35342M 10 x 1.5 100 24 10.0 8.0 35346DIN 376M 12 x 1.75 110 29 9.0 7.0 35350M 14 x 2.0 110 30 11.0 9.0 35354M 16 x 2.0 110 32 12.0 9.0 35358M 18 x 2.5 125 34 14.0 11.0 35362M 20 x 2.5 140 34 16.0 12.0 35366
SETM 3 - 12 M 3-4-5-6-8-10 (DIN 371), M 12 (DIN 376) 47853
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
8,708,709,509,50
11,0015,20
19,5022,0024,0032,5045,00
82,00
GREEN RING-Machine Tapsmetric ISO-thread DIN 13
Maschi a macchina con collarino verdefilettatura metrica ISO DIN 13
DIN 371/376 Form B HSS-E Tol. ISO2/6H
Application:
for general use- non abrasive material up to 1000 N/mm2
- unalloyed and low alloyed steel- long chipping material- for through holes
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 1.000 N/mm²- Acciaio non legati e scarsamente legati- Materiali truciolo lungo- per fori passanti
Nominal Diameter L 1 L 2 D 2 Art.-No.D
133
DIN 371 DIN 376
DIN 371M 3 x 0.5 56 6 3.5 2.7 36326M 4 x 0.7 63 7 4.5 3.4 36330M 5 x 0.8 70 8 6.0 4.9 36334M 6 x 1.0 80 10 6.0 4.9 36338M 8 x 1.25 90 14 8.0 6.2 36342M 10 x 1.5 100 16 10.0 8.0 36346DIN 376M 12 x 1.75 110 18 9.0 7.0 36350M 14 x 2.0 110 20 11.0 9.0 36354M 16 x 2.0 110 22 12.0 9.0 36358M 18 x 2.5 125 25 14.0 11.0 36362M 20 x 2.5 140 25 16.0 12.0 36366
SETM 3 - 12 M 3-4-5-6-8-10 (DIN 371), M 12 (DIN 376) 47863
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
10,4010,4011,4011,4013,2018,20
23,4026,4028,8039,0054,00
98,00
GREEN RING-Machine Tapsmetric ISO-thread DIN 13
Maschi a macchina con collarino verdefilettatura metrica ISO DIN 13
DIN 371/376 Form C/39° RSP HSS-E Tol. ISO2/6H
Application:
for general use- non abrasive material up to 1000 N/mm2
- unalloyed and low alloyed steel- long chipping material- for blind holes
Applicazione
per uso universale- Materiali con buona truciodibilità fino a R 1.000 N/mm²- Acciaio non legati e scarsamente legati- Materiali truciolo lungo- per fori ciechi
Nominal Diameter L 1 L 2 D 2 Art.-No.D
134
DIN 371 DIN 376
DIN 371M 3 x 0.5 56 11 3.5 2.7 30031M 4 x 0.7 63 13 4.5 3.4 30032M 5 x 0.8 70 14 6.0 4.9 30033M 6 x 1.0 80 16 6.0 4.9 30034M 8 x 1.25 90 18 8.0 6.2 30035M 10 x 1.5 100 22 10.0 8.0 30036DIN 376M 12 x 1.75 110 29 9.0 7.0 30037M 14 x 2.0 110 30 11.0 9.0 30038M 16 x 2.0 110 32 12.0 9.0 30039
€
18,0018,0019,0021,0025,0035,00
52,0077,0090,00
Nominal Diameter L 1 L 2 D 2 Art.-No.D
GREEN RING-Machine Tapsmetric ISO-thread DIN 13
Maschi a macchina con collarino verdefilettatura metrica ISO DIN 13
DIN 371/376 Form B HSSE-PM-TIN Tol. ISO2/6H
Application:for general use- non abrasive material up to 1.000 N/mm²- stainless and alloyed steel- unalloyed and low alloyed steel- Copper– and Aluminium-alloys- for through holes
Advantages HSSE-PM-TIN- increased wear resistance and toughness- TiN-coating improves anti-friction properties, thereby improved wear-resistance and reduced tendency of build-up edge
Applicazioneper uso universale- Materiali con buona truciodibilità fino a R 1.000 N/mm²- Acciaio inossidabili e legati- Acciaio non legati e scarsamente legati- Leghe di rame e alluminio- per fori passanti
Vantaggio HSSE-PM-TIN- maggiore resistenza all‘ abrasione e tenacità- migliore uniformità per mezzo di rivestimento TiN, riducendo così l’usare e ridotta tendenza di impasti per saldature
135
DIN 371 DIN 376
DIN 371M 3 x 0.5 56 6 3.5 2.7 30131M 4 x 0.7 63 7 4.5 3.4 30132M 5 x 0.8 70 8 6.0 4.9 30133M 6 x 1.0 80 10 6.0 4.9 30134M 8 x 1.25 90 14 8.0 6.2 30135M 10 x 1.5 100 16 10.0 8.0 30136DIN 371M 12 x 1.75 110 18 9.0 7.0 30137M 14 x 2.0 110 20 11.0 9.0 30138M 16 x 2.0 110 22 12.0 9.0 30139
€
20,5020,5022,0024,5030,0038,50
53,0082,0092,50
Nominal Diameter L 1 L 2 D 2 Art.-No.D
GREEN RING-Machine Tapsmetric ISO-thread DIN 13
Maschi a macchina con collarino verdefilettatura metrica ISO DIN 13
DIN 371/376 Form C/39° RSP HSSE-PM-TIN Tol. ISO2/6H
Application:for general use- non abrasive material up to 1.000 N/mm²- stainless and alloyed steel- unalloyed and low alloyed steel- Copper– and Aluminium-alloys- for blind holes
Advantages HSSE-PM-TIN- increased wear resistance and toughness- TiN-coating improves anti-friction properties, thereby improved wear-resistance and reduced tendency of build-up edge
Applicazioneper uso universale- Materiali con buona truciodibilità fino a R 1.000 N/mm²- Acciaio inossidabili e legati- Acciaio non legati e scarsamente legati- Leghe di rame e alluminio- per fori ciechi
Vantaggio HSSE-PM-TIN- maggiore resistenza all‘ abrasione e tenacità- migliore uniformità per mezzo di rivestimento TiN, riducendo così l’usare e ridotta tendenza di impasti per saldature
136
DIN 371 DIN 376
DIN 371M 3 x 0.5 56 11 3.5 2.7 35426M 4 x 0.7 63 13 4.5 3.4 35430M 5 x 0.8 70 16 6.0 4.9 35434M 6 x 1.0 80 19 6.0 4.9 35438M 8 x 1.25 90 22 8.0 6.2 35442M 10 x 1.5 100 24 10.0 8.0 35446DIN 376M 12 x 1.75 110 29 9.0 7.0 35450M 14 x 2.0 110 30 11.0 9.0 35454M 16 x 2.0 110 32 12.0 9.0 35458M 18 x 2.5 125 34 14.0 11.0 35462M 20 x 2.5 140 34 16.0 12.0 35466
SETM 3 - 12 M 3-4-5-6-8-10 (DIN 371), M 12 (DIN 376) 47854
TiCNDIN 371M 3 x 0.5 56 11 3.5 2.7 35427M 4 x 0.7 63 13 4.5 3.4 35431M 5 x 0.8 70 16 6.0 4.9 35435M 6 x 1.0 80 19 6.0 4.9 35439M 8 x 1.25 90 22 8.0 6.2 35443M 10 x 1.5 100 24 10.0 8.0 35447DIN 376M 12 x 1.75 110 29 9.0 7.0 35451M 14 x 2.0 110 30 11.0 9.0 35455M 16 x 2.0 110 32 12.0 9.0 35459M 18 x 2.5 125 34 14.0 11.0 35463M 20 x 2.5 140 34 16.0 12.0 35467
€
8,708,709,509,50
11,0015,20
19,5022,0024,0032,5045,00
82,00
11,8011,8012,6013,2015,7021,70
29,4033,0036,0048,4060,90
BLUE RING-Machine Tapsmetric ISO-thread DIN 13
Maschi a macchina con collarino blufilettatura metrica ISO DIN 13
DIN 371/376 Form B HSS-E Tol. ISO2/6H
Application:
wear resistant steel up to 1200 N/mm2
- high alloy steel- short chipping material- short chipping stainless steel- alloy tool steel- for through holes
TiCN- outstanding wear-resistance due to improved
hardness and toughness- intensive and optimum cooling essential as
reduced heat resistance
Applicazione
Acciaio resistente all’usura a 1.200 N/mm²- acciaio alto legato- Materiali duro con truciolo corto- Acciaio inossidabile con truciolo corto- Acciaio utensili legati- per fori passanti
TiCN- eccellente resistente all’usura per mezzo di durezza
e tenacia migliorata- intensa e ottimale lubrificazione è obbligatorio, per-
ché minore resistenza al calore
Nominal Diameter L 1 L 2 D 2 Art.-No.D
137137
DIN 371 DIN 376
DIN 371M 3 x 0.5 56 6 3.5 2.7 36426M 4 x 0.7 63 7 4.5 3.4 36430M 5 x 0.8 70 8 6.0 4.9 36434M 6 x 1.0 80 10 6.0 4.9 36438M 8 x 1.25 90 14 8.0 6.2 36442M 10 x 1.5 100 16 10.0 8.0 36446DIN 376M 12 x 1.75 110 18 9.0 7.0 36450M 14 x 2.0 110 20 11.0 9.0 36454M 16 x 2.0 110 22 12.0 9.0 36458M 18 x 2.5 125 25 14.0 11.0 36462M 20 x 2.5 140 25 16.0 12.0 36466
SETM 3 - 12 M 3-4-5-6-8-10 (DIN 371). M 12 (DIN 376) 47864
TiCNDIN 371M 3 x 0.5 56 6 3.5 2.7 36427M 4 x 0.7 63 7 4.5 3.4 36431M 5 x 0.8 70 8 6.0 4.9 36435M 6 x 1.0 80 10 6.0 4.9 36439M 8 x 1.25 90 14 8.0 6.2 36443M 10 x 1.5 100 16 10.0 8.0 36447DIN 376M 12 x 1.75 110 18 9.0 7.0 36451M 14 x 2.0 110 20 11.0 9.0 36455M 16 x 2.0 110 22 12.0 9.0 36459M 18 x 2.5 125 25 14.0 11.0 36463M 20 x 2.5 140 25 16.0 12.0 36467
€
10,4010,4011,4011,4013,2018,20
23,4026,4028,8039,0054,00
98,00
13,5013,5014,5015,1017,9024,70
33,3037,4040,8054,9069,90
BLUE RING-Machine Tapsmetric ISO-thread DIN 13
Maschi a macchina con collarino blufilettatura metrica ISO DIN 13
DIN 371/376 Form C/39° RSP HSS-E Tol. ISO2/6H
Application:
wear resistant steel up to 1200 N/mm2
- high alloy steel- short chipping material- short chipping stainless steel- alloy tool steel- for blind holes
TiCN- outstanding wear-resistance due to improved
hardness and toughness- intensive and optimum cooling essential as
reduced heat resistance
Applicazione
Acciaio resistente all’usura a 1.200 N/mm²- acciaio alto legato- Materiali duro con truciolo corto- Acciaio inossidabile con truciolo corto- Acciaio utensili legati- per fori ciechi
TiCN- eccellente resistente all’usura per mezzo di durezza
e tenacia migliorata- intensa e ottimale lubrificazione è obbligatorio,
perché minore resistenza al calore
Nominal Diameter L 1 L 2 D 2 Art.-No.D
138
DIN 371M 3 x 0.5 56 11 3.5 2.7 35226M 4 x 0.7 63 13 4.5 3.4 35230M 5 x 0.8 70 16 6.0 4.9 35234M 6 x 1.0 80 19 6.0 4.9 35238M 8 x 1.25 90 22 8.0 6.2 35242M 10 x 1.5 100 24 10.0 8.0 35246DIN 376M 12 x 1.75 110 29 9.0 7.0 35250M 14 x 2.0 110 30 11.0 9.0 35254M 16 x 2.0 110 32 12.0 9.0 35258M 18 x 2.5 125 34 14.0 11.0 35262M 20 x 2.5 140 34 16.0 12.0 35266
SETM 3 - 12 M 3-4-5-6-8-10 (DIN 371), M 12 (DIN 376) 47852
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
9,509,50
10,4010,4012,1016,70
21,4024,2026,4035,7049,50
90,00
Nominal Diameter L 1 L 2 D 2 Art.-No.D
WHITE RING-Machine Tapsmetric ISO-thread DIN 13
Maschi a macchina con collarino biancofilettatura metrica ISO DIN 13
DIN 371/376 Form B HSS-E Tol. ISO2/6H
Application:
Stainless Steel (INOX),long chipping up to 1000 N/mm2
- abrasive material- chrome-nickel alloys- surface treatment: steam tempered- for through holes
Applicazione:
Acciaio inossidabile, truciolo lungo a 1.000 N/mm²- materiali difficile da tagliare- Acciaio legato al Cr- Superficie: vaporizzato- per fori passanti
139
MF DIN 374M 5 x 0.5 70 12 3.5 2.7 35903M 6 x 0.75 80 14 4.5 3.4 35904M 8 x 0.75 80 19 6.0 4.9 35906M 8 x 1.0 90 22 6.0 4.9 35907M 10 x 1.0 90 20 7.0 5.5 35909M 10 x 1.25 100 24 7.0 5.5 35910M 12 x 1.25 100 22 9.0 7.0 35913M 12 x 1.5 100 22 9.0 7.0 35914M 14 x 1.5 100 22 11.0 9.0 35917M 16 x 1.5 100 22 12.0 9.0 35921M 18 x 1.5 110 25 14.0 11.0 35925M 20 x 1.5 125 25 16.0 12.0 35929
UNC DIN 371UNC 1/4 x 20 80 17 7.0 5.5 35945UNC 5/16 x 18 90 20 8.0 6.2 35946UNC 3/8 x 16 100 22 9.0 7.0 35947 DIN 376UNC 7/16 x 14 100 22 8.0 6.2 35948UNC 1/2 x 13 110 25 9.0 7.0 35949
UNF DIN 371UNF 1/4 x 28 80 17 7.0 5.5 35965UNF 5/16 x 24 90 17 8.0 6.2 35966UNF 3/8 x 24 100 18 9.0 7.0 35967 DIN 376UNF 7/16 x 20 100 22 8.0 6.2 35968UNF 1/2 x 20 100 22 9.0 7.0 35969
G (BSP) DIN 5156G 1/8 x 28 90 20 7.0 5.5 35992G 1/4 x 19 100 22 11.0 9.0 35993G 3/8 x 19 100 22 12.0 9.0 35994G 1/2 x 14 125 25 16.0 12.0 35995
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
16,5016,5016,5016,5019,3019,3026,4026,4033,0038,0046,2051,20
12,1015,4017,60
20,9020,90
12,1015,4017,60
20,9020,90
19,8024,2028,6041,80
Nominal Diameter L 1 L 2 D 2 Art.-No.D
WHITE RING-Machine Taps
Maschi a macchina con collarino bianco
Form B HSS-E
Application:
Stainless Steel (INOX),long chipping up to 1000 N/mm2
- abrasive material- chrome-nickel alloys- surface treatment: steam tempered- for through holes
Applicazione:
Acciaio inossidabile, truciolo lungo a 1.000 N/mm²- materiali difficile da tagliare- Acciaio legato al Cr- Superficie: vaporizzato- per fori passanti
140140
DIN 371M 3 x 0.5 56 6 3.5 2.7 36226M 4 x 0.7 63 7 4.5 3.4 36230M 5 x 0.8 70 8 6.0 4.9 36234M 6 x 1.0 80 10 6.0 4.9 36238M 8 x 1.25 90 14 8.0 6.2 36242M 10 x 1.5 100 16 10.0 8.0 36246DIN 376M 12 x 1.75 110 18 9.0 7.0 36250M 14 x 2.0 110 20 11.0 9.0 36254M 16 x 2.0 110 22 12.0 9.0 36258M 18 x 2.5 125 25 14.0 11.0 36262M 20 x 2.5 140 25 16.0 12.0 36266
SETM 3 - 12 M 3-4-5-6-8-10 (DIN 371), M 12 (DIN 376) 47862
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
11,4011,4012,5012,5014,5020,00
25,7029,0031,7042,9059,40
108,00
Nominal Diameter L 1 L 2 D 2 Art.-No.D
WHITE RING-Machine Tapsmetric ISO-thread DIN 13
Maschi a macchina con collarino biancofilettatura metrica ISO DIN 13
DIN 371/376 Form C/39° RSP HSS-E Tol. ISO2/6H
Application:
Stainless steel (INOX),long chipping up to 1000 N/mm2
- abrasive material- chrome-nickel alloys- surface treatment: steam tempered- for blind holes
Applicazione:
Acciaio inossidabile, truciolo lungo a 1.000 N/mm²- materiali difficile da tagliare- Acciaio legato al Cr- Superficie: vaporizzato- per fori ciechi
141141
MF DIN 374M 5 x 0.5 70 5 3.5 2.7 36903M 6 x 0.75 80 8 4.5 3.4 36904M 8 x 0.75 80 8 6.0 4.9 36906M 8 x 1.0 90 10 6.0 4.9 36907M 10 x 1.0 90 10 7.0 5.5 36909M 10 x 1.25 100 16 7.0 5.5 36910M 12 x 1.25 100 15 9.0 7.0 36913M 12 x 1.5 100 15 9.0 7.0 36914M 14 x 1.5 100 15 11.0 9.0 36917M 16 x 1.5 100 15 12.0 9.0 36921M 18 x 1.5 110 17 14.0 11.0 36925M 20 x 1.5 125 17 16.0 12.0 36929
UNC DIN 371UNC 1/4 x 20 80 13 7.0 5.5 36945UNC 5/16 x 18 90 14 8.0 6.2 36946UNC 3/8 x 16 100 16 9.0 7.0 36947 DIN 376UNC 7/16 x 14 100 17 8.0 6.2 36948UNC 1/2 x 13 110 20 9.0 7.0 36949
UNF DIN 371UNF 1/4 x 28 80 10 7.0 5.5 36965UNF 5/16 x 24 90 10 8.0 6.2 36966UNF 3/8 x 24 100 10 9.0 7.0 36967 DIN 376UNF 7/16 x 20 100 13 8.0 6.2 36968UNF 1/2 x 20 100 13 9.0 7.0 36969
G (BSP) DIN 5156G 1/8 x 28 90 20 7.0 5.5 36992G 1/4 x 19 100 22 11.0 9.0 36993G 3/8 x 19 100 22 12.0 9.0 36994G 1/2 x 14 125 25 16.0 12.0 36995
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
18,7018,7018,7018,7022,5022,2028,6028,6035,2040,7050,6056,10
15,1018,2020,00
25,3025,30
15,1018,2020,00
25,3025,30
22,0027,5037,7048,40
Nominal Diameter L 1 L 2 D 2 Art.-No.D
WHITE RING-Machine Taps
Maschi a macchina con collarino bianco
Form C/39° RSP HSS-E
Application:
Stainless steel (INOX),long chipping up to 1000 N/mm2
- abrasive material- chrome-nickel alloys- surface treatment: steam tempered- for blind holes
Applicazione:
Acciaio inossidabile, truciolo lungo a 1.000 N/mm²- materiali difficile da tagliare- Acciaio legato al Cr- Superficie: vaporizzato- per fori ciechi
142
DIN 371M 3 x 0.5 56 11 3.5 2.7 35126M 4 x 0.7 63 13 4.5 3.4 35130M 5 x 0.8 70 16 6.0 4.9 35134M 6 x 1.0 80 19 6.0 4.9 35138M 8 x 1.25 90 22 8.0 6.2 35142M 10 x 1.5 100 24 10.0 8.0 35146DIN 376M 12 x 1.75 110 29 9.0 7.0 35150M 14 x 2.0 110 30 11.0 9.0 35154M 16 x 2.0 110 32 12.0 9.0 35158M 18 x 2.5 125 34 14.0 11.0 35162M 20 x 2.5 140 34 16.0 12.0 35166
SETM 3 - 12 M 3-4-5-6-8-10 (DIN 371), M 12 (DIN 376) 47851
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
9,509,50
10,4010,4012,1016,70
21,4024,2026,4035,7049,50
90,00
Nominal Diameter L 1 L 2 D 2 Art.-No.D
BLACK RING-Machine Tapsmetric ISO-thread DIN 13
Maschi a macchina con collarino nerofilettatura metrica ISO DIN 13
DIN 371/376 Form C HSS-E Tol. ISO2/6H
Application:
Cast iron GGSpheroidal cast iron GGG- Magnesium alloys- surface treatment nitrided- Form C: for through and blind holes
Applicazione:
Ghisa grigia GGGhisa sferoidale GGG- Leghe di magnesio- Superficie: nitrurata- Forma C: per fori passanti e ciechi
143
DIN 371M 3 x 0.5 56 6 3.5 2.7 36526M 4 x 0.7 63 7 4.5 3.4 36530M 5 x 0.8 70 8 6.0 4.9 36534M 6 x 1.0 80 10 6.0 4.9 36538M 8 x 1.25 90 14 8.0 6.2 36542M 10 x 1.5 100 16 10.0 8.0 36546DIN 376M 12 x 1.75 110 18 9.0 7.0 36550M 14 x 2.0 110 20 11.0 9.0 36554M 16 x 2.0 110 22 12.0 9.0 36558
SETM 3 - 12 M 3-4-5-6-8-10 (DIN 371), M 12 (DIN 376) 47860
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
€
10,4010,4011,4011,4013,2018,20
23,4026,4028,80
98,00
Nominal Diameter L 1 L 2 D 2 Art.-No.D
YELLOW RING-Machine Tapsmetric ISO-thread DIN 13
Maschi a macchina con collarino giallofilettatura metrica ISO DIN 13
DIN 371/376 Form C/40° RSP HSS-E Tol. ISO2/6H
Application:
Aluminium-alloys, long chipping
- for blind holes- with 2 flutes
Applicazione:
Alluminio, truciolo lungo
- per fori ciechi- A 2 scanalature
144
DIN 371M 3 x 0.5 56 11 3.5 2.7 35726M 4 x 0.7 63 13 4.5 3.4 35730M 5 x 0.8 70 16 6.0 4.9 35734M 6 x 1.0 80 19 6.0 4.9 35738M 8 x 1.25 90 22 8.0 6.2 35742M 10 x 1.5 100 24 10.0 8.0 35746DIN 376M 12 x 1.75 110 29 9.0 7.0 35750M 14 x 2.0 110 30 11.0 9.0 35754M 16 x 2.0 110 32 12.0 9.0 35758
SETM 3 - 12 M 3-4-5-6-8-10 (DIN 371), M 12 (DIN 376) 47850
€
9,509,50
10,4010,4012,1016,70
21,4024,2026,40
90,00
Nominal Diameter L 1 L 2 D 2 Art.-No.D
ORANGE RING-Machine Tapsmetric ISO-thread DIN 13
Maschi a macchina con collarino arancionefilettatura metrica ISO DIN 13
DIN 371/376 Form C HSS-E Tol. ISO2/6H
Applicazione:
MsOttone, truciolo corto- per fori passanti e ciechi
Application:
MsBrass, short chipping- for through and blind holes
145
DIN 371M 4 x 0.7 63 9 4.5 3.4 36130M 5 x 0.8 70 11 6.0 4.9 36134M 6 x 1.0 80 13 6.0 4.9 36138M 8 x 1.25 90 15 8.0 6.2 36142M 10 x 1.5 100 16 10.0 8.0 36146
€
11,0012,2012,2014,0017,00
Nominal Diameter L 1 L 2 D 2 Art.-No.D
RED RING-Machine Tapsmetric ISO-thread DIN 13
Maschi a macchina con collarino rossofilettatura metrica ISO DIN 13
DIN 371 Form A HSS-E Tol. ISO2/6H
Application:
short-chipping Material from 1200 N/mm2 tensile strengthFor through and blind holes.Due to the very robust execution and the special profile of the flutes this Machine Tap is suitable for extreme applications.The lead Form A and an additional short lead make working easier.
Applicazione:
Materiali con truciolo corto da 1.200 N/mm² resist-enza alla trazioneper fori passanti e ciechiDalla versione particolarmente robusto e speciale profilo delle scanalature di questo maschi è adatto per applica-zioni estreme.L’imbocco a Forma A e un aggiuntivo imbocco corto facilitano la lavorazione
146
77 + 147 - 149
TWINBOXMachine Tap + Twist DrillTWINBOXMaschi a macchina + punte
Only Machine Taps which are suitable for the ap-plication achieve the optimum results.TwinBoxes include Coloured Ring Machine Taps together with the tapping size Drill for most efficient use and best results.Using Machine Taps and Twist Drills which are both suitable for the application will improve the quality of the thread and reduce costs.
Solo attraverso l’impiego di utensili specifici per un determinato materiale è possibile raggiungere un risultato preciso. Confezioni Twin con maschi a macchina con collarino e relative punte consentono una flessibilità di impiego maggiore. Attraverso l’impiego di punte specifiche per un determinato materiale è possibile aumentare la qualità del filetto.
147
M 3 x 0.5 DIN 371 2.5 mm 35390M 4 x 0.7 DIN 371 3.3 mm 35391M 5 x 0.8 DIN 371 4.2 mm 35392M 6 x 1.0 DIN 371 5.0 mm 35393M 8 x 1.25 DIN 371 6.8 mm 35394M 10 x 1.5 DIN 371 8.5 mm 35395M 12 x 1.75 DIN 376 10.2 mm 35396M 14 x 2.0 DIN 376 12.0 mm 35397M 16 x 2.0 DIN 376 14.0 mm 35398
M 3 x 0.5 DIN 371 2.5 mm 36390M 4 x 0.7 DIN 371 3.3 mm 36391M 5 x 0.8 DIN 371 4.2 mm 36392M 6 x 1.0 DIN 371 5.0 mm 36393M 8 x 1.25 DIN 371 6.8 mm 36394M 10 x 1.5 DIN 371 8.5 mm 36395M 12 x 1.75 DIN 376 10.2 mm 36396M 14 x 2.0 DIN 376 12.0 mm 36397M 16 x 2.0 DIN 376 14.0 mm 36398
€
10,4010,6011,6011,9014,7020,2027,2032,5039,80
12,1012,3013,5013,8016,8023,2031,1036,8044,50
Nominal Diameter Art.-No.D
GREEN RING TwinBoxMachine Tap + Twist Drillmetric ISO-thread DIN 13
TwinBox verdeMaschi a macchina + puntefilettatura metrica ISO DIN 13
DIN 371/376 HSS-E Tol. ISO2/6H
Application:
for general use- non abrasive material up to 1000 N/mm²- unalloyed and low alloyed steel- malleable cast iron and zinc alloysSpiral Point for through holesSpiral Flute for blind holes
HSS-CO Twist Drills DIN 338Type N right, 118° - Spiral: 25-30°
Applicazione:
per uso universale- Materiali buona truciodibilità fino a 1000 N/mm²- Acciaio non legati e scarsamente legati- Ghisa malleabile e leghe forgiateForma B per fori passanti35° RSP per fori ciechi
Punte DIN 338 HSS-CoTipo N, destra 118° - elica: 25-30°
Form B, Spiral Point / punta en espiral (pasante)
Form C, Spiral Flute / Helicoidal 35° (ciego)
148
M 3 x 0.5 DIN 371 2.5 mm 35490M 4 x 0.7 DIN 371 3.3 mm 35491M 5 x 0.8 DIN 371 4.2 mm 35492M 6 x 1.0 DIN 371 5.0 mm 35493M 8 x 1.25 DIN 371 6.8 mm 35494M 10 x 1.5 DIN 371 8.5 mm 35495M 12 x 1.75 DIN 376 10.2 mm 35496M 14 x 2.0 DIN 376 12.0 mm 35497M 16 x 2.0 DIN 376 14.0 mm 35498
M 3 x 0.5 DIN 371 2.5 mm 36490M 4 x 0.7 DIN 371 3.3 mm 36491M 5 x 0.8 DIN 371 4.2 mm 36492M 6 x 1.0 DIN 371 5.0 mm 36493M 8 x 1.25 DIN 371 6.8 mm 36494M 10 x 1.5 DIN 371 8.5 mm 36495M 12 x 1.75 DIN 376 10.2 mm 36496M 14 x 2.0 DIN 376 12.0 mm 36497M 16 x 2.0 DIN 376 14.0 mm 36498
€
10,6010,9011,8012,2015,0021,6027,6032,0040,80
12,3012,6013,7014,1017,2023,5031,7037,6045,60
BLUE RING TwinBoxMachine Tap + Twist Drillmetric ISO-thread DIN 13
TwinBox bluMaschi a macchina + puntefilettatura metrica ISO DIN 13
DIN 371/376 HSS-E Tol. ISO2/6H
Application:
wear resistant steel up to 1200 N/mm²- high alloy steel- short chipping material- short chipping stainless steel- alloy tool steelSpiral Point for through holesSpiral Flute for blind holes
HSS-CO Twist Drills DIN 338Form C right, 130° - Spiral: 25-30°with Split Point
Applicazione:
Acciaio resistente all’usura a 1200 N/mm²- Acciaio alto legato- Materiali duro con truciolo corto- Acciaio inossidabile con truciolo corto- Acciaio utensili legatiForma B per fori passanti35° RSP per fori ciechi
Punte DIN 338 HSS-CoForma C, destra 130° - elica: 25-30°con affilatura a croce
Form B, Spiral Point / con imbocco corretto
Form C, Spiral Flute / spirale destra a 35°,
Nominal Diameter Art.-No.D
149
M 3 x 0.5 DIN 371 2.5 mm 35290M 4 x 0.7 DIN 371 3.3 mm 35291M 5 x 0.8 DIN 371 4.2 mm 35292M 6 x 1.0 DIN 371 5.0 mm 35293M 8 x 1.25 DIN 371 6.8 mm 35294M 10 x 1.5 DIN 371 8.5 mm 35295M 12 x 1.75 DIN 376 10.2 mm 35296M 14 x 2.0 DIN 376 12.0 mm 35297M 16 x 2.0 DIN 376 14.0 mm 35298
M 3 x 0.5 DIN 371 2.5 mm 36290M 4 x 0.7 DIN 371 3.3 mm 36291M 5 x 0.8 DIN 371 4.2 mm 36292M 6 x 1.0 DIN 371 5.0 mm 36293M 8 x 1.25 DIN 371 6.8 mm 36294M 10 x 1.5 DIN 371 8.5 mm 36295M 12 x 1.75 DIN 376 10.2 mm 36296M 14 x 2.0 DIN 376 12.0 mm 36297M 16 x 2.0 DIN 376 14.0 mm 36298
€
11,4011,8012,7013,1016,1021,9029,6035,4043,20
13,3013,6014,8015,3018,5025,3033,8040,2048,60
Application:
Stainless Steel (INOX),long chipping up to 1000 N/mm²- long chipping, heat resistant steel- abrasive materialSpiral Point for through holesSpiral Flute for blind holesSurface treatment: steam tempered
HSS-CO Twist Drills DIN 338Form C right, 130° - Spiral: 25-30°with Split Point
Applicazione:
Acciaio inossidabile truciolo lungo a 1000 N/mm²- Acciaio resistente al calore truciolo lungo- Materiali difficile da tagliareForma B per fori passanti35° RSP per fori ciechiSuperficie: vaporizzato
Punte DIN 338 HSS-CoForma C, destra 130° - elica: 25-30°con affilatura a croce
Form B, Spiral Point / con imbocco corretto
Form C, Spiral Flute / spirale destra a 35°
Nominal Diameter Art.-No.D
WHITE RING TwinBoxMachine Tap + Twist Drillmetric ISO-thread DIN 13
TwinBox biancoMaschi a macchina + puntefilettatura metrica ISO DIN 13
DIN 371/376 HSS-E Tol. ISO2/6H
150150
FLUTELESS MACHINE TAPS MASCHI A RULLARE
Applicazione:
- Acciaio non legati e scarsamente legati- Acciaio da costruzione- Acciaio resistenti al calore- Acciaio inossidabile- Materiali non ferrosi truciolo lungo (Alluminio,
Bronzo, Rame, Ottone)- Leghe forgiate- per fori passanti e ciechi
Application:
- Unalloyed and low alloyed Steel- Constructional Steel- heat resistant Steel- Stainless Steel- long-chipping nonferrous Metal- Zinc Alloys- for through and blind holes
Benefit:
longer endurance as cutting taps higher possible cutting speed steady exactness of dimension and profile high stability of the forming threads high security against fracture no removal of swarf, no jaming of swarf
Fibre structure of thread formingAndamento delle fibre per filettatura rullata
Fibre structure of thread cuttingAndamento delle fibre per filettatura tagliata
Vantaggio:
Elevata durata Velocità di rotazione più elevata Quota e precisione del profilo costanti Più elevato carico ammissibile del filetto realizzato Maggiore resistenza alla rottura Elevata resistenza alla rottura Nessuna produzione di truciolo e relative
problematiche
Fluteless Taps (Forming Taps) are threading tools to form internal threads without cutting.The thread is produced by deformation of thematerial without damaging the fibre structure.
Maschi a rullare e utensili per la filettatura per la pro-duzione di filetti riportati senza produzione di trucioloIl filetto viene prodotto per deformazione del materiale, mantenendo intatto l’andamento delle fibre
151
because available because reliable because you
blanklucido
VAP TIN
6H ISO2 153 154 155
6GISO3 156
FLUTELESS MACHINE TAPS MASCHI A RULLARE
Application:
bright: - for nonferrous metal of good ductility
VAP (Steam Tempered):- for steel up to approx. 700 N/mm²
TIN (Titanium Nitride Coating):- for steel up to approx. 900 N/mm²
and to increase endurance and cutting speed
Applicazione:Lucido:- per materiali non ferrosi con buona deformabilità
VAP (vaporizzato):- per acciaio a ca. 700 N/mm²
TIN (revestimento di nitrurato di titanio):- per acciaio a ca. 900 N/mm²
per l’aumento della vita utensile e della velocità di taglio
152
x
x
x x
x x
x
x
x
x
x
M 1 M 1,1 M 1,2 M 1,4 M 1,6 M 1,7 M 1,8 M 2 M 2,5 M 3 M 4 M 5 M 6 M 8 M 10 M 12 M 14 M 16
0,90 1,00 1,10 1,25 1,45 1,55 1,65 1,80 2,30 2,80 3,70 4,65 5,55 7,45 9,30 11,20 13,00 15,10
RECOMMENDED APPLICATION OF FLUTELESS MACHINE TAPSPER MASCHI A RULLARE
RECOMMENDED CORE HOLE DIAMETERDIAMETRO DEL FORO RACCOMANDATO
Oil Groove:Use Fluteless Taps with Oil Groove forthread depth over 1,5 x D to optimizelubrication.
Lubrication:Good lubrication is very important whenforming threads.Use graphitic lubrication/oil with lubricityor add suitable additives.
Canali di espulsione:Per profondità del filetto oltre 1,5xD si possono utiliz-zare i maschi a rullare con canali di espulsione per una ottimale sbavatura
Lubrificazione:Buona lubrificazione e buone proprietà antifrizione sono molto importanti nel caso dei maschi a rullareImpiegare refrigeranti e lubrificanti/olii alla grafite op-pure aggiungere additivi appropriati
MaterialMateriali
brightlucido
VAP TIN
unalloyed and low alloyed SteelAcciaio non legati e e baso legati, truciolo corto
heat resistant SteelAcciaio resistenti al calore
Stainless SteelAcciaio inossidabile
Constructional SteelAcciaio da costruzione
Brass, long-chippingOttone, truciolo lungo
Bronzes, long-chippingBronzo, truciolo lungo
CopperRame
Al-alloys, long-chippingAlluminio, truciolo lungo
Zinc AlloyesLeghe forgiate
153
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
DIN 371M 1 x 0.25 40 5 2.5 2.1 35500M 1.1 x 0.25 40 5 2.5 2.1 35501M 1.2 x 0.25 40 5 2.5 2.1 35502M 1.4 x 0.3 40 7 2.5 2.1 35503M 1.6 x 0.35 40 8 2.5 2.1 35504M 1.7 x 0.35 40 8 2.5 2.1 35505M 1.8 x 0.35 40 8 2.5 2.1 35506M 2 x 0.4 45 8 2.8 2.1 35507M 2.5 x 0.45 50 9 2.8 2.1 35508M 3 x 0.5 56 11 3.5 2.7 35510M 4 x 0.7 63 13 4.5 3.4 35512M 5 x 0.8 70 16 6.0 4.9 35513M 6 x 1.0 80 19 6.0 4.9 35514M 8 x 1.25 90 22 8.0 6.2 35515M 10 x 1.5 100 24 10.0 8.0 35516DIN 376M 12 x 1.75 110 29 9.0 7.0 35517M 14 x 2.0 110 30 11.0 9.0 35518M 16 x 2.0 110 32 12.0 9.0 35519
DIN 371M 3 x 0.5 56 11 3.5 2.7 35610M 4 x 0.7 63 13 4.5 3.4 35612M 5 x 0.8 70 16 6.0 4.9 35613M 6 x 1.0 80 19 6.0 4.9 35614M 8 x 1.25 90 22 8.0 6.2 35615M 10 x 1.5 100 24 10.0 8.0 35616DIN 376M 12 x 1.75 110 29 9.0 7.0 35617M 14 x 2.0 110 30 11.0 9.0 35618M 16 x 2.0 110 32 12.0 9.0 35619
Fluteless Machine Taps (Forming Taps)metric ISO-thread DIN 13
Maschi a rullarefilettatura metrica ISO DIN 13
DIN 371/376 2.1/2 Thread Start HSS-E Tol. ISO2X/6HX
Nominal Diameter L 1 L 2 D 2 Art.-No.D
Application:
bright: - for nonferrous metal of good ductility
Applicazione:
Lucido:- per materiali non ferrosi con buona deformabilità
without Oil Groove/senza canali di espulsione
with Oil Groove/con canali di espulsione
€
24,0024,0024,0021,0021,0021,0021,0018,0018,009,50
10,6011,5011,5013,8016,10
20,7033,0039,00
10,4011,6012,6012,6015,1017,70
22,7036,3042,90
154
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
DIN 371M 3 x 0.5 56 11 3.5 2.7 35650M 4 x 0.7 63 13 4.5 3.4 35652M 5 x 0.8 70 16 6.0 4.9 35653M 6 x 1.0 80 19 6.0 4.9 35654M 8 x 1.25 90 22 8.0 6.2 35655M 10 x 1.5 100 24 10.0 8.0 35656DIN 376M 12 x 1.75 110 29 9.0 7.0 35657M 14 x 2.0 110 30 11.0 9.0 35658M 16 x 2.0 110 32 12.0 9.0 35659
DIN 371M 3 x 0.5 56 11 3.5 2.7 35550M 4 x 0.7 63 13 4.5 3.4 35552M 5 x 0.8 70 16 6.0 4.9 35553M 6 x 1.0 80 19 6.0 4.9 35554M 8 x 1.25 90 22 8.0 6.2 35555M 10 x 1.5 100 24 10.0 8.0 35556DIN 376M 12 x 1.75 110 29 9.0 7.0 35557M 14 x 2.0 110 30 11.0 9.0 35558M 16 x 2.0 110 32 12.0 9.0 35559
Fluteless Machine Tapsmetric ISO-thread DIN 13
Maschi a rullarefilettatura metrica ISO DIN 13
DIN 371/376 2.1/2 Thread Start HSSE-VAP Tol. ISO2X/6HX
Nominal Diameter L 1 L 2 D 2 Art.-No.D
without Oil Groove/senza canali di espulsione
with Oil Groove/con canali di espulsione
Applicazione: VAP (vaporizzato):- per acciaio a ca. 700 N/mm²
Application:
VAP (Steam Tempered):- for steel up to approx. 700 N/mm²
11,5012,8013,9013,9016,6019,47
25,0040,0047,20
€
10,5011,7012,7012,7015,2017,70
22,8036,3042,90
155
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
DIN 371M 1 x 0.25 40 5 2.5 2.1 35520M 1.1 x 0.25 40 5 2.5 2.1 35521M 1.2 x 0.25 40 5 2.5 2.1 35522M 1.4 x 0.3 40 7 2.5 2.1 35523M 1.6 x 0.35 40 8 2.5 2.1 35524M 1.7 x 0.35 40 8 2.5 2.1 35525M 1.8 x 0.35 40 8 2.5 2.1 35526M 2 x 0.4 45 8 2.8 2.1 35527M 2.5 x 0.45 50 9 2.8 2.1 35528M 3 x 0.5 56 11 3.5 2.7 35530M 4 x 0.7 63 13 4.5 3.4 35532M 5 x 0.8 70 16 6.0 4.9 35533M 6 x 1.0 80 19 6.0 4.9 35534M 8 x 1.25 90 22 8.0 6.2 35535M 10 x 1.5 100 24 10.0 8.0 35536DIN 376M 12 x 1.75 110 29 9.0 7.0 35537M 14 x 2.0 110 30 11.0 9.0 35538M 16 x 2.0 110 32 12.0 9.0 35539
DIN 371M 3 x 0.5 56 11 3.5 2.7 35630M 4 x 0.7 63 13 4.5 3.4 35632M 5 x 0.8 70 16 6.0 4.9 35633M 6 x 1.0 80 19 6.0 4.9 35634M 8 x 1.25 90 22 8.0 6.2 35635M 10 x 1.5 100 24 10.0 8.0 35636DIN 376M 12 x 1.75 110 29 9.0 7.0 35637M 14 x 2.0 110 30 11.0 9.0 35638M 16 x 2.0 110 32 12.0 9.0 35639
Fluteless Machine Tapsmetric ISO-thread DIN 13
Maschi a rullarefilettatura metrica ISO DIN 13
DIN 371/376 2.1/2 Thread Start HSSE-TIN Tol. ISO2X/6HX
Nominal Diameter L 1 L 2 D 2 Art.-No.D
without Oil Groove/senza canali di espulsione
with Oil Groove/con canali di espulsione
Applicazione: TIN (revestimento di nitrurato di titanio):- per acciaio a ca. 900 N/mm²
per l’aumento della vita utensile e della velocità di taglio
Application:
TIN (Titanium Nitride Coating):- for steel up to approx. 900 N/mm²
and to increase endurance and cutting speed
€
27,1027,1027,1024,1024,1024,1024,1021,1021,1012,6013,7014,6015,2018,5022,60
30,6044,0051,00
13,5014,7015,7016,3019,8024,20
32,6047,3054,90
156
DIN 371M 3 x 0.5 56 11 3.5 2.7 35510-6GM 4 x 0.7 63 13 4.5 3.4 35512-6GM 5 x 0.8 70 16 6.0 4.9 35513-6GM 6 x 1.0 80 19 6.0 4.9 35514-6GM 8 x 1.25 90 22 8.0 6.2 35515-6GM 10 x 1.5 100 24 10.0 8.0 35516-6GDIN 376M 12 x 1.75 110 29 9.0 7.0 35517-6G
DIN 371M 3 x 0.5 56 11 3.5 2.7 35610-6GM 4 x 0.7 63 13 4.5 3.4 35612-6GM 5 x 0.8 70 16 6.0 4.9 35613-6GM 6 x 1.0 80 19 6.0 4.9 35614-6GM 8 x 1.25 90 22 8.0 6.2 35615-6GM 10 x 1.5 100 24 10.0 8.0 35616-6GDIN 376M 12 x 1.75 110 29 9.0 7.0 35617-6G
Fluteless Machine Taps (Forming Taps), with oversizemetric ISO-thread DIN 13
Maschi a rullare, tolleranza maggiorata metrica ISO DIN 13
DIN 371/376 2.1/2 Thread Start HSS-E Tol. ISO3X/6GX
Applicazione:
Classe di tolleranza ISO 3 (6G) =tolleranza maggiorata di 0,02 – 0,04 mmPer materiali con strato protettivo galvanico
Application:
tolerance ISO 3 (6G) =oversize of 0,02 - 0,4 mmpre plate material forgalvanising
without Oil Groove/senza canali di espulsione
with Oil Groove/con canali di espulsione
Nominal Diameter L 1 L 2 D 2 Art.-No.D
€
10,0011,1012,0012,0014,5016,90
21,70
10,9012,1013,2013,2015,8018,60
23,80
157
because available because reliable because you
157
M Tr
158 159Machine Nut TapsMaschi a macchina per dadi
MACHINE NUT TAPSMASCHI A MACCHINA PER DADI
158
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
M
M 3 x 0.5 70 22 2.2 — 37126M 4 x 0.7 90 25 2.8 2.1 37130M 5 x 0.8 100 28 3.5 2.7 37134M 6 x 1.0 110 32 4.5 3.4 37138M 8 x 1.25 125 40 6.0 4.9 37142M 10 x 1.5 140 45 7.0 5.5 37146M 12 x 1.75 180 50 9.0 7.0 37150M 14 x 2.0 200 56 11.0 9.0 37154M 16 x 2.0 200 63 12.0 9.0 37158M 18 x 2.5 220 63 14.0 11.0 37162M 20 x 2.5 250 70 16.0 12.0 37166M 22 x 2.5 280 80 18.0 14.5 37170M 24 x 3.0 280 80 18.0 14.5 37174
Machine Nut Tapsmetric ISO-thread DIN 13
Maschi a macchina per dadifilettatura metrica ISO DIN 13
DIN 357 HSS-E Tol. ISO2/6H
Application:
- long reduced shank to allow nuts to run over- for thread depth up to 1 x D- ideal for tapping difficult to reach holes- for through holesfor general use- non abrasive material up to 800 N/mm2
- unalloyed and low alloyed steel
Applicazione:
- Gambo prolungato per la lavorazione di più dadi con-temporaneamente- profondità di maschiatura a 1 x D- per la filettatura in luoghi di difficile accesso- per fori passantiper uso universale- Materiali buona truciodibilità fino a R 800 N/mm²- Acciaio non legati e scarsamente legati
Nominal Diameter L 1 L 2 D 2 Art.-No.D
€
13,0013,0014,0014,0016,0021,0029,5037,0045,0051,0056,0067,0075,00
159
D
L2
D2
L1
ø B
1
ø B
2
L3
L2L1
D2
B
L2
D2
L1
Tr
Tr 10 x 2 110 63 7 5.5 79108Tr 10 x 3 125 75 7 5.5 79112Tr 12 x 3 165 111 8 6.2 79116Tr 14 x 3 140 85 10 8.0 79120Tr 14 x 4 170 112 10 8.0 79124Tr 16 x 4 180 116 11 9.0 79128Tr 18 x 4 190 120 12 9.0 79132Tr 20 x 4 200 124 14 11.0 79136Tr 22 x 4 210 130 16 12.0 79139Tr 22 x 5 235 155 16 12.0 79140Tr 24 x 5 245 160 18 14.5 79144Tr 26 x 5 255 165 20 16.0 79148Tr 28 x 5 265 170 22 18.0 79152Tr 30 x 6 290 185 22 18.0 79156Tr 32 x 6 300 191 25 20.0 79160Tr 36 x 6 310 200 28 22.0 79164
Tr 10 x 2 110 63 7 5.5 79108-LTr 10 x 3 125 75 7 5.5 79112-LTr 12 x 3 165 111 8 6.2 79116-LTr 14 x 3 140 85 10 8.0 79120-LTr 14 x 4 170 112 10 8.0 79124-LTr 16 x 4 180 116 11 9.0 79128-LTr 18 x 4 190 120 12 9.0 79132-LTr 20 x 4 200 124 14 11.0 79136-LTr 22 x 5 235 155 16 12.0 79140-LTr 24 x 5 245 160 18 14.5 79144-LTr 26 x 5 255 165 20 16.0 79148-LTr 28 x 5 265 170 22 18.0 79152-LTr 30 x 6 290 185 22 18.0 79156-LTr 32 x 6 300 191 25 20.0 79160-LTr 36 x 6 310 200 28 22.0 79164-L
Machine Nut Tapspiloted, trapezoidal thread DIN 103
Maschi a macchina per dadicon nocciolo di guida, filettatura trapeziodale metrica ISO 103
HSS-G Tol. 7H
Applicazione:
per uso universale- Materiali buona truciodibilità fino a R 800 N/mm²- Acciaio non legati e scarsamente legati- profondità di maschiatura a 1 x D- per fori passanti
Application:
for general use- non abrasive material up to 700 N/mm² - unalloyed and low alloyed steel- for thread depth up to 1 x D- for through holes
LEFT HAND THREAD/FILETTO SINISTRO
Nominal Diameter L 1 L 2 D 2 Art.-No.D
€
198,00198,00171,00182,00182,00199,00204,00212,00275,00275,00316,00330,00368,00432,00528,00540,00
278,00278,00240,00255,00255,00278,00287,00298,00385,00442,00462,00515,00605,00740,00755,00
160160
ROUND DIES HEXAGON DIE NUTSFILIEREFILIERE ESAGONALI
D Outside diameter Diametro esternoE Width of die Spessorea Width of land Ampiezza del denteb Hole for holding screws Diametro fissaggio vite� Rake angle Angolo di taglio� Lead angle Angolo dell‘imbocco� Angle of gun nose Angolo dell’imbocco corretto
Se non diversamente specificato, forniamo tutte le filiere in forma B (chiuso)
Unless otherwise requested,all dies are supplied solid(Form B).
Clearance HoleForo di evacuazione
Leadimbocco
GUN Noseimbocco corretto
Form A split / Forma A aperta
Form B solid / Forma B chiuso
161
because available because reliable because you
HSS HSSE LH HSS LH
M 162 182 185 192 201
M - 6e 164
Mf 165 183 186 193
BSW 171 189 195
BSF 171 195
BA 172
UNC 173 190 196
UNF 174 190 196
UNEF 175
8 - UN 197
G (BSP) 176 184 191 198 202
R (BSPT) 177 199
PG 178
NPT 179 200
NPTF 179
FG 180
BSC 180
Vg 181
ROUND DIES HEXAGON DIE NUTSFILIEREFILIERE ESAGONALI
162
M
M 1 x 0.25 16 x 5 27402M 1.1 x 0.25 16 x 5 27404M 1.2 x 0.25 16 x 5 27406M 1.4 x 0.3 16 x 5 27408M 1.6 x 0.35 16 x 5 27410M 1.7 x 0.35 16 x 5 27412M 1.8 x 0.35 16 x 5 27414M 2 x 0.4 16 x 5 27416M 2.2 x 0.45 16 x 5 27418M 2.3 x 0.4 16 x 5 27420M 2.5 x 0.45 16 x 5 27422M 2.6 x 0.45 16 x 5 27424M 3 x 0.5 20 x 5 27426M 3.5 x 0.6 20 x 5 27428M 4 x 0.7 20 x 5 27430M 4.5 x 0.75 20 x 7 27432M 5 x 0.8 20 x 7 27434M 5.5 x 0.9 20 x 7 27436M 6 x 1.0 20 x 7 27438M 7 x 1.0 25 x 9 27440M 8 x 1.25 25 x 9 27442M 9 x 1.25 25 x 9 27444M 10 x 1.5 30 x 11 27446M 11 x 1.5 30 x 11 27448M 12 x 1.75 38 x 14 27450M 14 x 2.0 38 x 14 27454M 15 x 2.0 38 x 14 27456M 16 x 2.0 45 x 18 27458M 18 x 2.5 45 x 18 27462M 19 x 2.5 45 x 18 27464M 20 x 2.5 45 x 18 27466M 22 x 2.5 55 x 22 27470M 24 x 3.0 55 x 22 27474M 27 x 3.0 65 x 25 27476M 30 x 3.5 65 x 25 27478M 33 x 3.5 65 x 25 27480M 36 x 4.0 65 x 25 27482M 39 x 4.0 75 x 30 27484M 42 x 4.5 75 x 30 27486M 45 x 4.5 90 x 36 27488M 48 x 5.0 90 x 36 27490M 52 x 5.0 90 x 36 27492M 56 x 5.5 105 x 36 27494M 60 x 5.5 105 x 36 27496M 64 x 6.0 120 x 36 27498M 68 x 6.0 120 x 36 27499
Applicazione:per uso universale- Materiali con buona truciodibilità fino a R 800 N/mm²- Acciaio non legati e scarsamente legati
Application:for general use- non abrasive material up to 800 N/mm² - unalloyed and low alloyed steel
Round Diesmetric ISO-thread DIN 13
Filiere tondefilettatura metrica ISO DIN 13
DIN 223 (DIN EN 22568) HSS Tol. 6g
Nominal Diameter Ø Art.-No.mm o / d
€
11,5011,5011,5011,5011,5011,5010,0010,0010,0010,0010,0010,00
4,807,404,807,405,107,405,108,005,409,106,95
10,5011,1011,5016,0017,8017,8017,8017,8032,2032,2045,2045,2045,2045,2073,0073,00
125,00125,00125,00298,00298,00395,00395,00
163
M
M 72 x 6.0 120 x 36 28280M 76 x 6.0 120 x 36 28281M 80 x 6.0 120 x 36 28282M 84 x 6.0 130 x 36 28283M 88 x 6.0 140 x 36 28284M 90 x 6.0 140 x 36 28285M 92 x 6.0 140 x 36 28286M 96 x 6.0 140 x 36 28287M 100 x 6.0 150 x 36 28288
M 3 x 0.5 25 x 9 27826M 4 x 0.7 25 x 9 27830M 5 x 0.8 25 x 9 27834M 6 x 1.0 25 x 9 27838M 8 x 1.25 25 x 9 27842M 10 x 1.5 25 x 9 27846M 12 x 1.75 25 x 9 27850
M 3 x 0.5 25.4 Form A 27926M 4 x 0.7 25.4 Form A 27930M 5 x 0.8 25.4 Form A 27934M 6 x 1.0 25.4 Form A 27938M 8 x 1.25 25.4 Form A 27942M 10 x 1.5 25.4 Form A 27946M 12 x 1.75 25.4 Form A 27950M 14 x 2.0 38.1 Form A 27954M 16 x 2.0 38.1 Form A 27958M 18 x 2.5 38.1 Form A 27962M 20 x 2.5 38.1 Form A 27966
Applicazione:per uso universale- Materiali con buona truciodibilità fino a R 800 N/mm²- Acciaio non legati e scarsamente legati
Application:for general use- non abrasive material up to 800 N/mm² - unalloyed and low alloyed steel
Round Diesmetric ISO-thread DIN 13
Filiere tondefilettatura metrica ISO DIN 13
HSS Tol. 6g
Nominal Diameter Ø Art.-No.mm o / d
€
288,00288,00288,00365,00570,00570,00570,00570,00660,00
5,405,405,405,405,405,405,40
6,406,406,406,406,406,406,40
14,2014,2014,2014,20
164
M
M 3 x 0.5 20 x 5 27503M 4 x 0.7 20 x 5 27505M 5 x 0.8 20 x 7 27507M 6 x 1.0 20 x 7 27509M 8 x 1.25 25 x 9 27511M 10 x 1.5 30 x 11 27513M 12 x 1.75 38 x 14 27515M 14 x 2.0 38 x 14 27516M 16 x 2.0 45 x 18 27517M 18 x 2.5 45 x 18 27518M 20 x 2.5 45 x 18 27519
Round Diesmetric ISO-thread DIN 13
Filiere tondefilettatura metrica ISO DIN 13
DIN 223 (DIN EN 22568) HSS Tol. 6e
Nominal Diameter Ø Art.-No.mm o / d
Application:for general use- non abrasive material up to 800 N/mm² - unalloyed and low alloyed steel
Applicazione:per uso universale- Materiali con buona truciodibilità fino a R 800 N/mm²- Acciaio non legati e scarsamente legati
€
7,607,607,907,908,50
11,0017,0022,0033,0033,0033,00
165
M 2.5 x 0.35 16 x 5 26404M 2.6 x 0.35 16 x 5 26405M 3 x 0.35 20 x 5 26408M 3.5 x 0.35 20 x 5 26409M 4 x 0.35 20 x 5 26410M 4 x 0.5 20 x 5 26412M 4.5 x 0.5 20 x 5 26413M 5 x 0.5 20 x 5 26414M 5 x 0.75 20 x 7 26416M 5.5 x 0.5 20 x 5 26415M 6 x 0.5 20 x 5 26417M 6 x 0.75 20 x 7 26418M 7 x 0.5 25 x 9 26419M 7 x 0.75 25 x 9 26420M 8 x 0.5 25 x 9 26422M 8 x 0.75 25 x 9 26424M 8 x 1.0 25 x 9 26426M 9 x 0.5 25 x 9 26427M 9 x 0.75 25 x 9 26428M 9 x 1.0 25 x 9 26430M 10 x 0.5 30 x 11 26431M 10 x 0.75 30 x 11 26432M 10 x 1.0 30 x 11 26436M 10 x 1.25 30 x 11 26438M 11 x 1.0 30 x 11 26440M 11 x 1.25 30 x 11 26442M 12 x 0.5 38 x 10 26445M 12 x 0.75 38 x 10 26443M 12 x 1.0 38 x 10 26444M 12 x 1.25 38 x 10 26446M 12 x 1.5 38 x 10 26448M 13 x 0.5 38 x 10 26447M 13 x 0.75 38 x 10 26449M 13 x 1.0 38 x 10 26450M 13 x 1.5 38 x 10 26451M 14 x 0.5 38 x 10 26455M 14 x 0.75 38 x 10 26452M 14 x 1.0 38 x 10 26453M 14 x 1.25 38 x 10 26454M 14 x 1.5 38 x 10 26456M 15 x 0.75 38 x 10 26457M 15 x 1.0 38 x 10 26458M 15 x 1.5 38 x 10 26460M 16 x 0.5 45 x 14 26461M 16 x 0.75 45 x 14 26463
Mf
Round Diesmetric-fine ISO-thread DIN 13
Filiere tondefilettatura metrica fine ISO DIN 13
DIN 223 (DIN EN 22568) HSS Tol. 6g
Nominal Diameter Ø Art.-No.mm o / d
Application:for general use- non abrasive material up to 800 N/mm² - unalloyed and low alloyed steel
Applicazione:per uso universale- Materiali con buona truciodibilità fino a R 800 N/mm²- Acciaio non legati e scarsamente legati
€
11,5011,5010,8010,8010,8010,8010,8010,8010,8010,8010,80
9,0011,5011,5011,509,509,50
14,6014,6014,6014,6014,6011,0011,0016,5016,5016,5016,5014,0014,0013,5023,0023,0018,4018,4023,0018,4018,4015,5015,5029,0025,0025,0032,0032,00
166
Mf
M 16 x 1.0 45 x 14 26462M 16 x 1.25 45 x 14 26464M 16 x 1.5 45 x 14 26466M 17 x 1.0 45 x 14 26468M 17 x 1.5 45 x 14 26469M 18 x 0.5 45 x 14 26467M 18 x 0.75 45 x 14 26473M 18 x 1.0 45 x 14 26470M 18 x 1.25 45 x 14 26471M 18 x 1.5 45 x 14 26472M 18 x 2.0 45 x 14 26474M 19 x 1.0 45 x 14 26475M 19 x 1.5 45 x 14 26476M 20 x 0.5 45 x 14 26477M 20 x 0.75 45 x 14 26479M 20 x 1.0 45 x 14 26478M 20 x 1.25 45 x 14 26480M 20 x 1.5 45 x 14 26484M 20 x 2.0 45 x 14 26486M 21 x 1.0 45 x 14 26487M 21 x 1.5 45 x 14 26488M 22 x 0.5 55 x 16 26489M 22 x 0.75 55 x 16 26491M 22 x 1.0 55 x 16 26490M 22 x 1.25 55 x 16 26492M 22 x 1.5 55 x 16 26494M 22 x 2.0 55 x 16 26496M 23 x 1.0 55 x 16 26497M 23 x 1.5 55 x 16 26498M 24 x 0.5 55 x 16 26601M 24 x 0.75 55 x 16 26603M 24 x 1.0 55 x 16 26600M 24 x 1.25 55 x 16 26602M 24 x 1.5 55 x 16 26604M 24 x 2.0 55 x 16 26606M 25 x 1.0 55 x 16 26607M 25 x 1.5 55 x 16 26608M 26 x 1.0 55 x 16 26610M 26 x 1.5 55 x 16 26612M 26 x 2.0 55 x 16 26614M 27 x 1.0 65 x 18 26616M 27 x 1.5 65 x 18 26617M 27 x 2.0 65 x 18 26618M 28 x 1.0 65 x 18 26620M 28 x 1.5 65 x 18 26622M 28 x 2.0 65 x 18 26624M 29 x 1.5 65 x 18 26626M 30 x 1.0 65 x 18 26628M 30 x 1.5 65 x 18 26630M 30 x 2.0 65 x 18 26632
Nominal Diameter Ø Art.-No.mm o / d
Round Diesmetric-fine ISO-thread DIN 13
Filiere tondefilettatura metrica fine ISO DIN 13
DIN 223 (DIN EN 22568) HSS Tol. 6g
€
25,0025,0019,0034,0034,0034,0034,0023,0023,0019,0023,5034,0023,0034,0034,0023,5023,5019,0023,5035,5035,5049,0049,0038,0038,0033,5038,0049,8038,0049,0049,0038,0038,0033,5038,0049,0049,0049,0049,0049,0056,0056,0056,0056,0056,0056,0056,0056,0056,0056,00
167
Mf
M 30 x 2.5 65 x 18 26633M 30 x 3.0 65 x 25 26634M 32 x 1.0 65 x 18 26639M 32 x 1.5 65 x 18 26636M 32 x 2.0 65 x 18 26635M 32 x 3.0 65 x 25 26637M 33 x 1.5 65 x 18 26638M 33 x 2.0 65 x 18 26640M 33 x 3.0 65 x 25 26642M 34 x 1.0 65 x 18 26643M 34 x 1.5 65 x 18 26644M 34 x 2.0 65 x 18 26646M 35 x 1.0 65 x 18 26647M 35 x 1.5 65 x 18 26648M 35 x 2.0 65 x 18 26649M 36 x 1.0 65 x 18 26651M 36 x 1.5 65 x 18 26650M 36 x 2.0 65 x 18 26652M 36 x 3.0 65 x 25 26654M 37 x 1.5 65 x 18 26653M 38 x 1.0 75 x 20 26655M 38 x 1.5 75 x 20 26656M 38 x 2.0 75 x 20 26657M 38 x 3.0 75 x 30 26659M 39 x 1.5 75 x 20 26658M 39 x 2.0 75 x 20 26660M 39 x 3.0 75 x 30 26662M 40 x 1.0 75 x 20 26663M 40 x 1.5 75 x 20 26664M 40 x 2.0 75 x 20 26666M 40 x 3.0 75 x 30 26668M 42 x 1.0 75 x 20 26669M 42 x 1.5 75 x 20 26670M 42 x 2.0 75 x 20 26672M 42 x 3.0 75 x 30 26674M 44 x 1.5 90 x 22 26671M 44 x 2.0 90 x 22 26673M 45 x 1.0 90 x 22 26675M 45 x 1.5 90 x 22 26676M 45 x 2.0 90 x 22 26678M 45 x 3.0 90 x 36 26680M 46 x 1.5 90 x 22 26681M 48 x 1.0 90 x 22 26683M 48 x 1.5 90 x 22 26682M 48 x 2.0 90 x 22 26684M 48 x 3.0 90 x 36 26686M 50 x 1.5 90 x 22 26688M 50 x 2.0 90 x 22 26690M 50 x 3.0 90 x 36 26692M 52 x 1.5 90 x 22 26694
Nominal Diameter Ø Art.-No.mm o / d
Round Diesmetric-fine ISO-thread DIN 13
Filiere tondefilettatura metrica fine ISO DIN 13
DIN 223 (DIN EN 22568) HSS Tol. 6g
€
56,0056,0079,0056,0056,0056,0056,0056,0056,0079,0056,0056,0079,0056,0079,0079,0056,0056,0056,00
119,00119,0090,0090,00
119,0090,0090,0090,00
119,0090,0090,0090,00
119,0090,0090,0090,00
194,00194,00194,00144,00144,00144,00194,00194,00144,00144,00144,00144,00144,00144,00144,00
168
Mf
M 52 x 2.0 90 x 22 26696M 52 x 3.0 90 x 36 26698M 54 x 1.0 105 x 22 28267M 54 x 1.5 105 x 22 28150M 54 x 2.0 105 x 22 28151M 54 x 3.0 105 x 36 28152M 54 x 4.0 105 x 36 28153M 55 x 1.5 105 x 22 28154M 55 x 2.0 105 x 22 28155M 55 x 3.0 105 x 36 28156M 55 x 4.0 105 x 36 28157M 56 x 1.0 105 x 22 28268M 56 x 1.5 105 x 22 28158M 56 x 2.0 105 x 22 28159M 56 x 3.0 105 x 36 28160M 56 x 4.0 105 x 36 28161M 58 x 1.0 105 x 22 28269M 58 x 1.5 105 x 22 28162M 58 x 2.0 105 x 22 28163M 58 x 3.0 105 x 36 28164M 58 x 4.0 105 x 36 28165M 60 x 1.5 105 x 22 28166M 60 x 2.0 105 x 22 28167M 60 x 3.0 105 x 36 28168M 60 x 4.0 105 x 36 28169M 62 x 1.5 105 x 22 28170M 62 x 2.0 105 x 22 28171M 62 x 3.0 105 x 36 28172M 62 x 4.0 105 x 36 28173M 63 x 1.5 105 x 22 28174M 64 x 1.5 120 x 22 28175M 64 x 2.0 120 x 22 28176M 64 x 3.0 120 x 36 28177M 64 x 4.0 120 x 36 28178M 65 x 1.5 120 x 22 28179M 65 x 2.0 120 x 22 28180M 65 x 3.0 120 x 36 28181M 65 x 4.0 120 x 36 28182M 68 x 1.5 120 x 22 28183M 68 x 2.0 120 x 22 28184M 68 x 3.0 120 x 36 28185M 68 x 4.0 120 x 36 28186M 70 x 1.5 120 x 22 28187M 70 x 2.0 120 x 22 28188M 70 x 3.0 120 x 36 28189M 70 x 4.0 120 x 36 28190M 72 x 1.5 120 x 22 28191M 72 x 2.0 120 x 22 28192M 72 x 3.0 120 x 36 28193M 72 x 4.0 120 x 36 28194
Nominal Diameter Ø Art.-No.mm o / d
Round Diesmetric-fine ISO-thread DIN 13
Filiere tondefilettatura metrica fine ISO DIN 13
DIN 223 (DIN EN 22568) HSS Tol. 6g
€
144,00144,00266,00266,00266,00266,00266,00266,00266,00266,00266,00266,00266,00266,00266,00266,00266,00266,00266,00266,00266,00266,00266,00266,00266,00266,00266,00266,00266,00266,00302,00302,00302,00302,00302,00302,00302,00302,00302,00302,00302,00302,00302,00302,00302,00302,00302,00302,00302,00302,00
169
Mf
M 74 x 1.5 120 x 22 28195M 74 x 2.0 120 x 22 28196M 74 x 3.0 120 x 36 28197M 74 x 4.0 120 x 36 28198M 75 x 1.5 120 x 22 28199M 75 x 2.0 120 x 22 28200M 75 x 3.0 120 x 36 28201M 75 x 4.0 120 x 36 28202M 76 x 1.5 120 x 22 28203M 76 x 2.0 120 x 22 28204M 76 x 3.0 120 x 36 28205M 76 x 4.0 120 x 36 28206M 78 x 1.5 120 x 22 28207M 78 x 2.0 120 x 22 28208M 78 x 3.0 120 x 36 28209M 78 x 4.0 120 x 36 28210M 80 x 1.5 120 x 22 28211M 80 x 2.0 120 x 22 28212M 80 x 3.0 120 x 36 28213M 80 x 4.0 120 x 36 28214M 82 x 1.5 130 x 25 28215M 82 x 2.0 130 x 25 28216M 82 x 3.0 130 x 36 28217M 82 x 4.0 130 x 36 28218M 84 x 1.5 130 x 25 28219M 84 x 2.0 130 x 25 28220M 84 x 3.0 130 x 36 28221M 84 x 4.0 130 x 36 28222M 85 x 1.5 130 x 25 28223M 85 x 2.0 130 x 25 28224M 85 x 3.0 130 x 36 28225M 85 x 4.0 130 x 36 28226M 86 x 1.5 140 x 22 28227M 86 x 2.0 140 x 22 28228M 86 x 3.0 140 x 22 28229M 86 x 4.0 140 x 22 28230M 88 x 1.5 140 x 22 28231M 88 x 2.0 140 x 22 28232M 88 x 3.0 140 x 22 28233M 88 x 4.0 140 x 22 28234M 90 x 1.5 140 x 22 28235M 90 x 2.0 140 x 22 28236M 90 x 3.0 140 x 22 28237M 90 x 4.0 140 x 22 28238M 92 x 1.5 140 x 22 28239M 92 x 2.0 140 x 22 28240M 92 x 3.0 140 x 22 28241M 92 x 4.0 140 x 22 28242M 95 x 1.5 140 x 22 28243M 95 x 2.0 140 x 22 28244
Nominal Diameter Ø Art.-No.mm o / d
Round Diesmetric-fine ISO-thread DIN 13
Filiere tondefilettatura metrica fine ISO DIN 13
DIN 223 (DIN EN 22568) HSS Tol. 6g
€
302,00302,00302,00302,00302,00302,00302,00302,00302,00302,00302,00302,00302,00302,00302,00302,00302,00302,00302,00302,00383,00383,00383,00383,00383,00383,00383,00383,00383,00383,00383,00383,00477,00477,00477,00477,00477,00477,00477,00477,00477,00477,00477,00477,00477,00477,00477,00477,00477,00477,00
170
Mf
M 95 x 3.0 140 x 22 28245M 95 x 4.0 140 x 22 28246M 96 x 1.5 140 x 22 28247M 96 x 2.0 140 x 22 28248M 96 x 3.0 140 x 22 28249M 96 x 4.0 140 x 22 28250M 98 x 1.5 150 x 25 28251M 98 x 2.0 150 x 25 28252M 98 x 3.0 150 x 25 28253M 98 x 4.0 150 x 25 28254M 100 x 1.5 150 x 25 28255M 100 x 2.0 150 x 25 28256M 100 x 3.0 150 x 25 28257M 100 x 4.0 150 x 25 28258M 105 x 1.5 150 x 25 28259M 105 x 2.0 150 x 25 28260M 105 x 3.0 150 x 25 28261M 105 x 4.0 150 x 25 28262M 110 x 1.5 160 x 25 28263M 110 x 2.0 160 x 25 28264M 110 x 3.0 160 x 25 28265M 110 x 4.0 160 x 25 28266
Round Diesmetric-fine ISO-thread DIN 13
Filiere tondefilettatura metrica fine ISO DIN 13
DIN 223 (DIN EN 22568) HSS Tol. 6g
Nominal Diameter Ø Art.-No.mm o / d
€
477,00477,00477,00477,00477,00477,00574,00574,00574,00574,00574,00574,00574,00574,00574,00574,00574,00574,00626,00626,00626,00626,00
171
BSW / BSF
BSWBSW 1/16 x 60 16 x 5 22402BSW 3/32 x 48 16 x 5 22404BSW 1/8 x 40 20 x 5 22406BSW 5/32 x 32 20 x 5 22408BSW 3/16 x 24 20 x 7 22410BSW 7/32 x 24 20 x 7 22412BSW 1/4 x 20 20 x 7 22414BSW 5/16 x 18 25 x 9 22416BSW 3/8 x 16 30 x 11 22418BSW 7/16 x 14 30 x 11 22420BSW 1/2 x 12 38 x 14 22422BSW 9/16 x 12 38 x 14 22424BSW 5/8 x 11 45 x 18 22426BSW 3/4 x 10 45 x 18 22430BSW 7/8 x 9 55 x 22 22434BSW 1" x 8 55 x 22 22438BSW 1.1/8 x 7 65 x 25 22442BSW 1.1/4 x 7 65 x 25 22446BSW 1.3/8 x 6 65 x 25 22450BSW 1.1/2 x 6 65 x 25 22452BSW 1.1/2 x 6 75 x 30 22454BSW 1.5/8 x 5 75 x 30 22458BSW 1.3/4 x 5 90 x 36 22462BSW 1.7/8 x 4.1/2 90 x 36 22466BSW 2" x 4.1/2 90 x 36 22470BSW 2.1/4 x 4 105 x 36 22472BSW 2.1/2 x 4 105 x 36 22474BSW 2.3/4 x 3.1/2 120 x 36 22476BSW 3" x 3.1/2 120 x 36 22478
BSFBSF 3/16 x 32 20 x 7 22810BSF 1/4 x 26 20 x 7 22814BSF 5/16 x 22 25 x 9 22816BSF 3/8 x 20 30 x 11 22818BSF 7/16 x 18 30 x 11 22820BSF 1/2 x 16 38 x 10 22822BSF 9/16 x 16 38 x 10 22824BSF 5/8 x 14 45 x 14 22826BSF 3/4 x 12 45 x 14 22830BSF 7/8 x 11 55 x 16 22834BSF 1" x 10 55 x 22 22838
Applicazione:per uso universale- Materiali con buona truciodibilità fino a R 800 N/mm²- Acciaio non legati e scarsamente legati
Application:for general use- non abrasive material up to 800 N/mm² - unalloyed and low alloyed steel
Round DiesWhitworth-thread BS 84
Filiere tondefilettatura Whitworth BS 84
DIN 223 (DIN EN 22568) HSS
Nominal Diameter Ø Art.-No.o / d
€
10,0010,0010,0010,0010,0010,0010,0011,5012,7014,7016,5020,4022,3022,3034,5034,5057,5057,5057,5057,50
102,90102,90155,00155,00155,00404,00404,00496,00496,00
10,0010,0011,5013,2014,7019,8022,0030,0030,0039,0039,00
172
BA
BA 0 20.6 x 6.35 Form A 89000BA 1 20.6 x 6.35 Form A 89001BA 2 20.6 x 6.35 Form A 89002BA 3 20.6 x 6.35 Form A 89003BA 4 20.6 x 6.35 Form A 89004BA 5 20.6 x 6.35 Form A 89005BA 6 20.6 x 6.35 Form A 89006
Application:for general use- non abrasive material up to 800 N/mm² - unalloyed and low alloyed steel
Round Split DiesBA-thread BS 93
Filiere tondefilettatura BA, BS 93
BS1127 HSS
Nominal Diameter Ø Art.-No.o / d
Applicazione:per uso universale- Materiali con buona truciodibilità fino a R 800 N/mm²- Acciaio non legati e scarsamente legati
€
9,909,909,909,909,909,909,90
173
UNC
UNC Nr. 1 x 64 16 x 5 23401UNC Nr. 2 x 56 16 x 5 23402UNC Nr. 3 x 48 16 x 5 23403UNC Nr. 4 x 40 20 x 5 23404UNC Nr. 5 x 40 20 x 5 23405UNC Nr. 6 x 32 20 x 7 23406UNC Nr. 8 x 32 20 x 7 23408UNC Nr.10 x 24 20 x 7 23410UNC Nr.12 x 24 20 x 7 23412UNC 1/4 x 20 20 x 7 23414UNC 5/16 x 18 25 x 9 23416UNC 3/8 x 16 30 x 11 23418UNC 7/16 x 14 30 x 11 23420UNC 1/2 x 13 38 x 14 23422UNC 9/16 x 12 38 x 14 23424UNC 5/8 x 11 45 x 18 23426UNC 3/4 x 10 45 x 18 23430UNC 7/8 x 9 55 x 22 23434UNC 1" x 8 55 x 22 23438UNC 1.1/8 x 7 65 x 25 23442UNC 1.1/4 x 7 65 x 25 23446UNC 1.3/8 x 6 65 x 25 23450UNC 1.1/2 x 6 65 x 25 23452UNC 1.1/2 x 6 75 x 30 23454UNC 1.5/8 x 5 75 x 30 23458UNC 1.3/4 x 5 90 x 36 23462UNC 1.7/8 x 4.1/2 90 x 36 23466UNC 2" x 4.1/2 90 x 36 23470
Round DiesUnified Coarse thread
Filiere tondefilettatura unificata, serie grossa ANSI B1.1
DIN 223 (DIN EN 22568) HSS
Nominal Diameter Ø Art.-No.o / d
Application:for general use- non abrasive material up to 800 N/mm² - unalloyed and low alloyed steel
Applicazione:per uso universale- Materiali con buona truciodibilità fino a R 800 N/mm²- Acciaio non legati e scarsamente legati
€
18,8018,8018,8013,0013,0013,0013,0013,0013,0010,0011,5012,7014,7016,5020,4022,3022,3034,5034,5057,5057,5057,5057,50
102,90102,90155,00155,00155,00
174
UNF
UNF Nr. 0 x 80 16 x 5 24400UNF Nr. 1 x 72 16 x 5 24401UNF Nr. 2 x 64 16 x 5 24402UNF Nr. 3 x 56 16 x 5 24403UNF Nr. 4 x 48 20 x 5 24404UNF Nr. 5 x 44 20 x 5 24405UNF Nr. 6 x 40 20 x 5 24406UNF Nr. 8 x 36 20 x 7 24408UNF Nr. 10 x 32 20 x 7 24410UNF Nr. 12 x 28 20 x 7 24412UNF 1/4 x 28 20 x 7 24414UNF 5/16 x 24 25 x 9 24416UNF 3/8 x 24 30 x 11 24418UNF 7/16 x 20 30 x 11 24420UNF 1/2 x 20 38 x 10 24422UNF 9/16 x 18 38 x 10 24424UNF 5/8 x 18 45 x 14 24426UNF 3/4 x 16 45 x 14 24430UNF 7/8 x 14 55 x 16 24434UNF 1" x 12 55 x 16 24438UNF 1" x 14 55 x 16 24440UNF 1.1/8 x 12 65 x 18 24442UNF 1.1/4 x 12 65 x 18 24446UNF 1.3/8 x 12 65 x 18 24450UNF 1.1/2 x 12 65 x 18 24452UNF 1.1/2 x 12 75 x 20 24454
Nominal Diameter Ø Art.-No.o / d
Round DiesUnified Fine thread
Filiere tondefilettatura unificata, serie fina ANSI B1.1
DIN 223 (DIN EN 22568) HSS
Application:for general use- non abrasive material up to 800 N/mm² - unalloyed and low alloyed steel
Applicazione:per uso universale- Materiali con buona truciodibilità fino a R 800 N/mm²- Acciaio non legati e scarsamente legati
€
18,8018,8018,8018,8013,0013,0013,0013,0013,0013,0010,0011,5012,7014,7016,5020,4022,3022,3034,5034,5034,5057,5057,5057,5057,50
102,90
175
UNEF Nr. 12 x 32 20 x 7 24612UNEF 1/4 x 32 20 x 7 24614UNEF 5/16 x 32 25 x 9 24615UNEF 3/8 x 32 30 x 11 24616UNEF 7/16 x 28 30 x 11 24620UNEF 1/2 x 28 38 x 10 24621UNEF 9/16 x 24 38 x 10 24625UNEF 5/8 x 24 45 x 14 24626UNEF 11/16 x 24 45 x 14 24627UNEF 3/4 x 20 45 x 14 24633UNEF 13/16 x 20 55 x 16 24634UNEF 7/8 x 20 55 x 16 24635UNEF 15/16 x 20 55 x 16 24636UNEF 1" x 20 55 x 16 24637UNEF 1.1/16 x 18 65 x 18 24645UNEF 1.1/8 x 18 65 x 18 24646UNEF 1.3/16 x 18 65 x 18 24647UNEF 1.1/4 x 18 65 x 18 24648UNEF 1.5/16 x 18 65 x 18 24649UNEF 1.3/8 x 18 65 x 18 24650UNEF 1.7/16 x 18 75 x 20 24651UNEF 1.1/2 x 18 75 x 20 24652
UNEFNominal Diameter Ø Art.-No.
o / d
Round DiesUnified Extra Fine thread ANSI B 1.1
Filiere tondefilettatura unificata, serie extra-fina ANSI B1.1
DIN 223 (DIN EN 22568) HSS
Application:for general use- non abrasive material up to 800 N/mm² - unalloyed and low alloyed steel
Applicazione:per uso universale- Materiali con buona truciodibilità fino a R 800 N/mm²- Acciaio non legati e scarsamente legati
€
13,0013,0016,0018,0018,0027,5027,5044,0044,0044,0052,0052,0052,0052,0083,0083,0083,0083,0083,0083,00
104,00104,00
176
G (BSP)
G 1/8 x 28 30 x 11 25412G 1/4 x 19 38 x 10 25414G 3/8 x 19 45 x 14 25416G 1/2 x 14 45 x 14 25418G 5/8 x 14 55 x 16 25420G 3/4 x 14 55 x 16 25422G 7/8 x 14 65 x 18 25424G 1" x 11 65 x 18 25426G 1.1/8 x 11 75 x 20 25430G 1.1/4 x 11 75 x 20 25434G 1.3/8 x 11 90 x 22 25438G 1.1/2 x 11 90 x 22 25442G 1.5/8 x 11 90 x 22 25446G 1.3/4 x 11 105 x 22 25450G 2" x 11 90 x 22 25452G 2" x 11 105 x 22 25454G 2.1/4 x 11 120 x 22 25458G 2.1/2 x 11 120 x 22 25462G 2.3/4 x 11 120 x 22 25466G 3" x 11 130 x 25 25470G 3.1/2 x 11 150 x 25 25474G 4" x 11 160 x 25 25478
Nominal Diameter Ø Art.-No.o / d
Round DiesPipe-thread DIN ISO 228
Filiere tondefilettatura per tubi gas DIN ISO 228
DIN 5158 (DIN EN 24231) HSS
Application:for general use- non abrasive material up to 800 N/mm² - unalloyed and low alloyed steel
Applicazione:per uso universale- Materiali con buona truciodibilità fino a R 800 N/mm²- Acciaio non legati e scarsamente legati
€
15,0015,0020,0020,0033,5033,5045,2045,2069,0069,00
117,00117,00117,00245,00117,00245,00336,00445,00445,00493,00798,00987,00
177
R (BSPT)
PT 1/8 x 28 38 x 11 Form A 97006PT 1/4 x 19 38 x 16 Form A 97014PT 3/8 x 19 50 x 18 Form A 97020PT 1/2 x 14 50 x 22 Form A 97022PT 3/4 x 14 50 x 24 Form A 97030PT 1" x 11 63 x 28 Form A 97040PT 1.1/4 x 11 75 x 32 Form A 97048
Nominal Diameter Ø Art.-No.o / d
Round Diestapered pipe thread, taper 1:16, con. 55°
Filiere tondefilettatura conica per tubi, cono 1:16
HSS
Application:for general use- non abrasive material up to 800 N/mm² - unalloyed and low alloyed steel
Applicazione:per uso universale- Materiali con buona truciodibilità fino a R 800 N/mm²- Acciaio non legati e scarsamente legati
€
16,0016,0032,5032,5032,5054,0073,00
178
PG
PG 7 x 20 38 x 10 25807PG 9 x 18 45 x 14 25809PG 11 x 18 45 x 14 25811PG 13.5 x 18 45 x 14 25813PG 16 x 18 55 x 16 25816PG 21 x 16 65 x 18 25821PG 29 x 16 65 x 18 25829PG 36 x 16 90 x 22 25836PG 42 x 16 105 x 22 25842PG 48 x 16 105 x 22 25848
Nominal Diameter Ø Art.-No.o / d
Round Diesarmoured tube thread DIN 40 430
Filiere tondefilettatura per tubi corazzati DIN 40 430
DIN 40434 HSS
Application:for general use- non abrasive material up to 800 N/mm² - unalloyed and low alloyed steel
Applicazione:per uso universale- Materiali con buona truciodibilità fino a R 800 N/mm²- Acciaio non legati e scarsamente legati
€
37,0045,0045,0045,0053,0082,0082,00
162,00206,00206,00
179
NPT / NPTF
NPTNPT 1/16 x 27 25 x 9 23610NPT 1/8 x 27 30 x 11 23612NPT 1/4 x 18 38 x 14 23614NPT 3/8 x 18 45 x 14 23616NPT 1/2 x 14 45 x 18 23618NPT 5/8 x 14 55 x 22 23620NPT 3/4 x 14 55 x 22 23622NPT 7/8 x 14 65 x 25 23624NPT 1" x 11.5 65 x 25 23626NPT 1.1/4 x 11.5 75 x 26 23634NPT 1.1/2 x 11.5 90 x 27 23642NPT 2" x 11.5 105 x 28 23654
NPTFNPTF 1/8 x 27 50 x 11 Form A 98072NPTF 1/4 x 18 50 x 14 Form A 98074NPTF 3/8 x 18 50 x 14 Form A 98076NPTF 1/2 x 14 50 x 18 Form A 98078NPTF 3/4 x 14 50 x 22 Form A 98080NPTF 1" x 11.5 50 x 25 Form A 98082
Nominal Diameter Ø Art.-No.o / d
Round Diesamerican tapered pipe thread, taper 1:16
Filiere tondefilettatura americana conica per tubi, cono 1:16
HSS
Application:for general use- non abrasive material up to 800 N/mm² - unalloyed and low alloyed steel
Applicazione:per uso universale- Materiali con buona truciodibilità fino a R 800 N/mm²- Acciaio non legati e scarsamente legati
€
30,0032,0039,0049,0049,0079,0079,00
117,00117,00138,00225,00298,00
33,0033,0033,0033,0033,0033,00
180
FG / BSC
FG (DIN 79012)FG 2 x 56 16 x 5 79301FG 2.3 x 56 16 x 5 79302FG 2.6 x 56 16 x 5 79303FG 6.35 x 26 20 x 7 79304FG 7.9 x 26 25 x 9 79305FG 9.5 x 26 30 x 11 79306FG 14.3 x 20 38 x 10 79307FG 14.3 x 20 - LH 38 x 10 79308FG 25.4 x 24 55 x 16 79309
BSC (BS 811)BSC 1/4 x 26 20 x 7 79320BSC 5/16 x 26 25 x 9 79321BSC 3/8 x 26 30 x 11 79322BSC 9/16 x 20 38 x 10 79323BSC 9/16 x 20 - LH 38 x 10 79324BSC 1" x 24 55 x 16 79325
Round DiesCycle thread DIN 79012 and BS 811
Filiere tondefilettatura per biciclette DIN 79012 e BS 811
DIN 223 (DIN EN 22568) HSS
Application:for general use- non abrasive material up to 800 N/mm² - unalloyed and low alloyed steel
Applicazione:per uso universale- Materiali con buona truciodibilità fino a R 800 N/mm²- Acciaio non legati e scarsamente legati
Nominal Diameter Ø Art.-No.o / d
€
35,0035,0035,0036,0051,0071,00
109,00131,00297,00
36,0051,0071,00
109,00131,00297,00
181
Vg
VG 5 x 36 20 x 7 79330VG 5.2 x 24 20 x 7 79331VG 6 x 32 20 x 7 79332VG 8 x 32 25 x 9 79333VG 10 x 28 30 x 11 79334VG 12 x 26 30 x 11 79335
Round DiesValve thread DIN 7756
Filiere tondefilettatura per valvole DIN 7756
DIN 223 (DIN EN 22568) HSS
Applicazione:per uso universale- Materiali con buona truciodibilità fino a R 800 N/mm²- Acciaio non legati e scarsamente legati
Application:for general use- non abrasive material up to 800 N/mm² - unalloyed and low alloyed steel
Nominal Diameter Ø Art.-No.o / d
€
36,0036,0036,0051,0071,0071,00
182
M
M 3 x 0.5 20 x 5 57426M 4 x 0.7 20 x 5 57430M 5 x 0.8 20 x 7 57434M 6 x 1.0 20 x 7 57438M 8 x 1.25 25 x 9 57442M 10 x 1.5 30 x 11 57446M 12 x 1.75 38 x 14 57450M 14 x 2.0 38 x 14 57454M 16 x 2.0 45 x 18 57458M 18 x 2.5 45 x 18 57462M 20 x 2.5 45 x 18 57466M 22 x 2.5 55 x 22 57470M 24 x 3.0 55 x 22 57474M 27 x 3.0 65 x 25 57476M 30 x 3.5 65 x 25 57478
Nominal Diameter Ø Art.-No.mm o / d
Round Dies, gun nosedmetric ISO-thread DIN 13
Filiere tonde con imbocco correttofilettatura metrica ISO DIN 13
DIN 223 (DIN EN 22568) HSS-E Tol. 6g
Vantaggio- elevata durata- taglio più facile- libero scarico del truciolo dal davanti- nessun intasamento dei lobi di evacuazione del truciolo
Applicazione- materiali di difficile truciolabilità- Acciaio inossidabili - e per uso universale
Benefit:- high cutting ability- reduction of torque- uninterrupted swarf flow in direction of feed- prevents jaming of swarf
Application:- abrasive material up to 1200 N/mm- INOX (stainless steel)- and general use
€
7,707,708,008,00
11,3016,1025,4025,4038,3038,3038,3068,2068,20
100,80100,80
183
Mf
M 6 x 0.75 20 x 7 56418M 8 x 0.75 25 x 9 56424M 8 x 1.0 25 x 9 56426M 10 x 1.0 30 x 11 56436M 10 x 1.25 30 x 11 56438M 12 x 1.0 38 x 10 56444M 12 x 1.25 38 x 10 56446M 12 x 1.5 38 x 10 56448M 14 x 1.25 38 x 10 56454M 14 x 1.5 38 x 10 56456M 16 x 1.5 45 x 14 56466M 18 x 1.5 45 x 14 56472M 18 x 2.0 45 x 14 56474M 20 x 1.5 45 x 14 56484M 20 x 2.0 45 x 14 56486M 22 x 1.5 55 x 16 56494M 24 x 1.5 55 x 16 56604
Nominal Diameter Ø Art.-No.mm o / d
Round Dies, gun nosedmetric-fine ISO-thread DIN 13
Filiere tonde con imbocco correttofilettatura metrica fine ISO DIN 13
DIN 223 (DIN EN 22568) HSS-E Tol. 6g
Vantaggio:- elevata durata- taglio più facile- libero scarico del truciolo dal davanti- nessun intasamento dei lobi di evacuazione del truciolo
Applicazione:- materiali di difficile truciolabilità- Acciaio inossidabili - e per uso universale
Benefit:- high cutting ability- reduction of torque- uninterrupted swarf flow in direction of feed- prevents jaming of swarf
Application:- abrasive material up to 1200 N/mm- INOX (stainless steel)- and general use
€
10,9012,1012,1013,4013,4023,1023,1023,1023,1023,1037,0037,0037,0037,0037,0082,0082,00
184
G (BSP)
G 1/8 x 28 30 x 11 55412G 1/4 x 19 38 x 10 55414G 3/8 x 19 45 x 14 55416G 1/2 x 14 45 x 14 55418G 3/4 x 14 55 x 16 55422G 1" x 11 65 x 18 55426
Nominal Diameter Ø Art.-No.o / d
Round Dies, gun nosedPipe-thread DIN ISO 228
Filiere tonde con imbocco correttofilettatura per tubi gas DIN ISO 228
DIN 5158 (DIN EN 24231) HSS-E
Vantaggio:- elevata durata- taglio più facile- libero scarico del truciolo dal davanti- nessun intasamento dei lobi di evacuazione del truciolo
Applicazione:- materiali di difficile truciolabilità- Acciaio inossidabili - e per uso universale
Benefit:- high cutting ability- reduction of torque- uninterrupted swarf flow in direction of feed- prevents jaming of swarf
Application:- abrasive material up to 1200 N/mm²- INOX (stainless steel)- and general use
€
23,0023,0034,5034,5063,0090,00
185
M
M 2 x 0.4 16 x 5 27216M 3 x 0.5 20 x 5 27226M 4 x 0.7 20 x 5 27230M 5 x 0.8 20 x 7 27234M 6 x 1.0 20 x 7 27238M 8 x 1.25 25 x 9 27242M 10 x 1.5 30 x 11 27246M 12 x 1.75 38 x 14 27250M 14 x 2.0 38 x 14 27254M 16 x 2.0 45 x 18 27258M 18 x 2.5 45 x 18 27262M 20 x 2.5 45 x 18 27266M 22 x 2.5 55 x 22 27270M 24 x 3.0 55 x 22 27274M 27 x 3.0 65 x 25 27276M 30 x 3.5 65 x 25 27278M 33 x 3.5 65 x 25 27280M 36 x 4.0 65 x 25 27282M 39 x 4.0 75 x 30 27284M 42 x 4.5 75 x 30 27286M 45 x 4.5 90 x 36 27288M 48 x 5.0 90 x 36 27290M 52 x 5.0 90 x 36 27292
Nominal Diameter Ø Art.-No.mm o / d
Round Dies, Left Handmetric ISO-thread DIN 13
Filiere tonde, filetto sinistrofilettatura metrica ISO DIN 13
DIN 223 (DIN EN 22568) HSS Tol. 6g
Application:
for general use- non abrasive material up to 800 N/mm² - unalloyed and low alloyed steel
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 800 N/mm²- Acciaio non legati e scarsamente legati
€
18,007,907,908,508,509,80
13,0018,2021,0029,0029,0029,0043,0043,0079,0079,0079,0079,00
131,00131,00209,00209,00209,00
186
Mf
M 2.5 x 0.35 16 x 5 26801M 3 x 0.35 20 x 5 26802M 3.5 x 0.35 20 x 5 26803M 4 x 0.35 20 x 5 26804M 4 x 0.5 20 x 5 26805M 4.5 x 0.5 20 x 5 26806M 5 x 0.5 20 x 5 26807M 5 x 0.75 20 x 7 26808M 5.5 x 0.5 20 x 5 26809M 6 x 0.5 20 x 5 26810M 6 x 0.75 20 x 7 26207M 7 x 0.5 25 x 9 26811M 7 x 0.75 25 x 9 26812M 8 x 0.5 25 x 9 26813M 8 x 0.75 25 x 9 26210M 8 x 1.0 25 x 9 26211M 9 x 0.5 25 x 9 26814M 9 x 0.75 25 x 9 26815M 9 x 1.0 25 x 9 26816M 10 x 0.5 30 x 11 26817M 10 x 0.75 30 x 11 26818M 10 x 1.0 30 x 11 26215M 10 x 1.25 30 x 11 26216M 11 x 1.0 30 x 11 26819M 11 x 1.25 30 x 11 26820M 12 x 0.5 38 x 10 26821M 12 x 0.75 38 x 10 26822M 12 x 1.0 38 x 10 26220M 12 x 1.25 38 x 10 26221M 12 x 1.5 38 x 10 26222M 13 x 0.5 38 x 10 26823M 13 x 0.75 38 x 10 26824M 13 x 1.0 38 x 10 26825M 13 x 1.5 38 x 10 26826M 14 x 0.5 38 x 10 26827M 14 x 0.75 38 x 10 26828M 14 x 1.0 38 x 10 26829M 14 x 1.25 38 x 10 26227M 14 x 1.5 38 x 10 26228M 15 x 0.75 38 x 10 26830M 15 x 1.0 38 x 10 26831M 15 x 1.5 38 x 10 26832M 16 x 0.75 45 x 14 26833M 16 x 1.0 45 x 14 26231M 16 x 1.25 45 x 14 26834M 16 x 1.5 45 x 14 26233
Nominal Diameter Ø Art.-No.mm o / d
Round Dies, Left Handmetric-fine ISO-thread DIN 13
Filiere tonde, filetto sinistrofilettatura metrica fine ISO DIN 13
DIN 223 (DIN EN 22568) HSS Tol. 6g
Application:for general use- non abrasive material up to 800 N/mm² - unalloyed and low alloyed steel
Applicazione:per uso universale- Materiali con buona truciodibilità fino a R 800 N/mm²- Acciaio non legati e scarsamente legati
€
13,5013,5013,5013,5013,5013,5013,5013,5013,5013,5013,5016,0016,0016,0016,0016,0016,0016,0016,0020,0020,0020,0020,0020,0020,0026,0026,0026,0026,0026,0026,0026,0026,0026,0026,0026,0026,0026,0026,0026,0026,0026,0039,0039,0039,0039,00
187
Mf
M 17 x 1.0 45 x 14 26835M 17 x 1.5 45 x 14 26836M 18 x 0.75 45 x 14 26837M 18 x 1.0 45 x 14 26838M 18 x 1.25 45 x 14 26839M 18 x 1.5 45 x 14 26236M 18 x 2.0 45 x 14 26840M 19 x 1.0 45 x 14 26841M 19 x 1.5 45 x 14 26842M 20 x 0.5 45 x 14 26843M 20 x 0.75 45 x 14 26844M 20 x 1.0 45 x 14 26845M 20 x 1.25 45 x 14 26846M 20 x 1.5 45 x 14 26240M 20 x 2.0 45 x 14 26847M 21 x 1.0 45 x 14 26848M 21 x 1.5 45 x 14 26849M 22 x 1.0 55 x 16 26850M 22 x 1.25 55 x 16 26851M 22 x 1.5 55 x 16 26245M 22 x 2.0 55 x 16 26852M 24 x 1.25 55 x 16 26853M 24 x 1.5 55 x 16 26250M 24 x 2.0 55 x 16 26251M 25 x 1.0 55 x 16 26854M 25 x 1.5 55 x 16 26855M 26 x 1.0 55 x 16 26856M 26 x 1.5 55 x 16 26857M 26 x 2.0 55 x 16 26858M 27 x 1.0 65 x 18 26859M 27 x 1.5 65 x 18 26860M 27 x 2.0 65 x 18 26861M 28 x 1.0 65 x 18 26862M 28 x 1.5 65 x 18 26863M 28 x 2.0 65 x 18 26864M 29 x 1.5 65 x 18 26865M 30 x 1.0 65 x 18 26866M 30 x 1.5 65 x 18 26867M 30 x 2.0 65 x 18 26264M 30 x 2.5 65 x 18 26265M 30 x 3.0 65 x 25 26266M 32 x 1.0 65 x 18 26267M 32 x 1.5 65 x 18 26268M 32 x 2.0 65 x 18 26269M 32 x 3.0 65 x 25 26270M 33 x 1.5 65 x 18 26271
Round Dies, Left Handmetric-fine ISO-thread DIN 13
Filiere tonde, filetto sinistrofilettatura metrica fine ISO DIN 13
DIN 223 (DIN EN 22568) HSS Tol. 6g
Application:for general use- non abrasive material up to 800 N/mm² - unalloyed and low alloyed steel
Applicazione:per uso universale- Materiali con buona truciodibilità fino a R 800 N/mm²- Acciaio non legati e scarsamente legati
Nominal Diameter Ø Art.-No.o / d
€
39,0039,0039,0039,0039,0039,0039,0039,0039,0039,0039,0039,0039,0039,0039,0039,0039,0062,0062,0062,0062,0062,0062,0062,0062,0062,0062,0062,0062,0098,0098,0098,0098,0098,0098,0098,0098,0098,0098,0098,0098,0098,0098,0098,0098,0098,00
188
Mf
M 33 x 2.0 65 x 18 26272M 33 x 3.0 65 x 25 26273M 34 x 1.0 65 x 18 26274M 34 x 1.5 65 x 18 26275M 34 x 2.0 65 x 18 26276M 35 x 1.0 65 x 18 26277M 35 x 1.5 65 x 18 26278M 35 x 2.0 65 x 18 26279M 36 x 1.0 65 x 18 26280M 36 x 1.5 65 x 18 26281M 36 x 2.0 65 x 18 26282M 36 x 3.0 65 x 25 26283M 37 x 1.5 65 x 18 26284M 38 x 1.0 75 x 20 26285M 38 x 1.5 75 x 20 26286M 38 x 2.0 75 x 20 26287M 38 x 3.0 75 x 30 26288M 39 x 1.5 75 x 20 26289M 39 x 2.0 75 x 20 26290M 39 x 3.0 75 x 30 26291M 40 x 1.0 75 x 20 26292M 40 x 1.5 75 x 20 26293M 40 x 2.0 75 x 20 26294M 40 x 3.0 75 x 30 26295M 42 x 1.0 75 x 20 26296M 42 x 1.5 75 x 20 26297M 42 x 2.0 75 x 20 26298M 42 x 3.0 75 x 30 26299M 44 x 1.5 90 x 22 26868M 45 x 1.5 90 x 22 26869M 45 x 2.0 90 x 22 26870M 45 x 3.0 90 x 36 26871M 46 x 1.5 90 x 22 26872M 48 x 1.5 90 x 22 26873M 48 x 2.0 90 x 22 26874M 48 x 3.0 90 x 36 26875M 50 x 1.5 90 x 22 26876M 50 x 2.0 90 x 22 26877M 50 x 3.0 90 x 36 26878M 52 x 1.5 90 x 22 26879M 52 x 2.0 90 x 22 26880M 52 x 3.0 90 x 36 26881
Application:for general use- non abrasive material up to 800 N/mm² - unalloyed and low alloyed steel
Round Dies, Left Handmetric-fine ISO-thread DIN 13
Filiere tonde, filetto sinistrofilettatura metrica fine ISO DIN 13
DIN 223 (DIN EN 22568) HSS Tol. 6g
Applicazione:per uso universale- Materiali con buona truciodibilità fino a R 800 N/mm²- Acciaio non legati e scarsamente legati
Nominal Diameter Ø Art.-No.o / d
€
98,0098,0098,0098,0098,0098,0098,0098,0098,0098,0098,0098,0098,00
149,00149,00149,00149,00149,00149,00149,00149,00149,00149,00149,00149,00149,00149,00149,00267,00267,00267,00267,00267,00267,00267,00267,00267,00267,00267,00267,00267,00267,00
189
BSW
BSW 1/8 x 40 20 x 5 22206BSW 5/32 x 32 20 x 5 22208BSW 3/16 x 24 20 x 7 22210BSW 1/4 x 20 20 x 7 22214BSW 5/16 x 18 25 x 9 22216BSW 3/8 x 16 30 x 11 22218BSW 7/16 x 14 30 x 11 22220BSW 1/2 x 12 38 x 14 22222BSW 9/16 x 12 38 x 14 22224BSW 5/8 x 11 45 x 18 22226BSW 3/4 x 10 45 x 18 22230BSW 7/8 x 9 55 x 22 22234BSW 1" x 8 55 x 22 22238
Nominal Diameter Ø Art.-No.o / d
Round Dies, Left HandWhitworth-thread BS 84
Filiere tonde, filetto sinistrofilettatura Whitworth BS 84
DIN 223 (DIN EN 22568) HSS
Application:for general use- non abrasive material up to 800 N/mm² - unalloyed and low alloyed steel
Applicazione:per uso universale- Materiali con buona truciodibilità fino a R 800 N/mm²- Acciaio non legati e scarsamente legati
€
15,5015,5015,5015,5018,0022,0022,0034,5034,5044,0044,0064,0064,00
190
UNC / UNF
UNCUNC Nr. 6 x 32 20 x 7 23206UNC Nr. 8 x 32 20 x 7 23208UNC Nr. 10 x 24 20 x 7 23210UNC 1/4 x 20 20 x 7 23214UNC 5/16 x 18 25 x 9 23216UNC 3/8 x 16 30 x 11 23218UNC 7/16 x 14 38 x 14 23220UNC 1/2 x 13 38 x 14 23222UNC 9/16 x 12 38 x 14 23224UNC 5/8 x 11 45 x 18 23226UNC 3/4 x 10 45 x 18 23230UNC 7/8 x 9 55 x 22 23234UNC 1" x 8 55 x 22 23238
UNFUNF Nr. 10 x 32 20 x 7 24210UNF 1/4 x 28 20 x 7 24214UNF 5/16 x 24 25 x 9 24216UNF 3/8 x 24 30 x 11 24218UNF 7/16 x 20 30 x 11 24220UNF 1/2 x 20 38 x 10 24222UNF 9/16 x 18 38 x 10 24224UNF 5/8 x 18 45 x 14 24226UNF 3/4 x 16 45 x 14 24230UNF 7/8 x 14 55 x 16 24234UNF 1" x 12 55 x 16 24238
Nominal Diameter Width across flats Art.-No.mm mm
Round Dies, Left HandUnified thread ANSI B 1.1
Filiere tonde, filetto sinistrofilettatura unificata ANSI B1.1
DIN 223 (DIN EN 22568) HSS
Application:
for general use- non abrasive material up to 800 N/mm² - unalloyed and low alloyed steel
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 800 N/mm²- Acciaio non legati e scarsamente legati
€
19,0019,0019,0015,5018,0022,0022,0034,5034,5044,0044,0064,0064,00
19,0015,5018,0022,0022,0034,5034,5044,0044,0064,0064,00
191
G (BSP)
G 1/8 x 28 30 x 11 25212G 1/4 x 19 38 x 10 25214G 3/8 x 19 45 x 14 25216G 1/2 x 14 45 x 14 25218G 5/8 x 14 55 x 16 25220G 3/4 x 14 55 x 16 25222G 7/8 x 14 65 x 18 25224G 1" x 11 65 x 18 25226G 1.1/8 x 11 75 x 20 25230G 1.1/4 x 11 75 x 20 25234G 1.3/8 x 11 90 x 22 25238G 1.1/2 x 11 90 x 22 25242G 1.5/8 x 11 90 x 22 25246G 1.3/4 x 11 105 x 22 25250G 2" x 11 105 x 22 25254
Nominal Diameter Width across flats Art.-No.mm
Round Dies, Left HandPipe-thread DIN ISO 228
Filiere tonde, filetto sinistrofilettatura per tubi gas DIN ISO 228
DIN 5158 (DIN EN 24231) HSS
Application:
for general use- non abrasive material up to 800 N/mm² - unalloyed and low alloyed steel
Applicazione:
per uso universale- Materiali con buona truciodibilità fino a R 800 N/mm²- Acciaio non legati e scarsamente legati
€
27,0031,0045,0045,0060,7076,0083,0083,00
102,00102,00161,00161,00161,00298,00298,00
192
M
M 3 x 0.5 19 x 5 27126M 3.5 x 0.6 19 x 5 27128M 4 x 0.7 19 x 5 27130M 5 x 0.8 19 x 7 27134M 6 x 1.0 19 x 7 27138M 7 x 1.0 22 x 9 27140M 8 x 1.25 22 x 9 27142M 9 x 1.25 22 x 9 27144M 10 x 1.5 27 x 11 27146M 11 x 1.5 27 x 11 27148M 12 x 1.75 36 x 14 27150M 14 x 2.0 36 x 14 27154M 16 x 2.0 41 x 18 27158M 18 x 2.5 41 x 18 27162M 20 x 2.5 41 x 18 27166M 22 x 2.5 50 x 22 27170M 24 x 3.0 50 x 22 27174M 27 x 3.0 60 x 25 27176M 30 x 3.5 60 x 25 27178M 33 x 3.5 60 x 25 27180M 36 x 4.0 60 x 25 27182M 39 x 4.0 70 x 30 27184M 42 x 4.5 70 x 30 27186M 45 x 4.5 85 x 36 27188M 48 x 5.0 85 x 36 27190M 52 x 5.0 85 x 36 27192M 56 x 5.5 100 x 36 27194M 60 x 5.5 100 x 36 27196M 64 x 6.0 100 x 36 27198M 68 x 6.0 115 x 36 27199
Nominal Diameter Width across flats Art.-No.mm mm
Hexagon Die Nutsmetric ISO-thread DIN 13
Filiere esagonalifilettatura metrica ISO DIN 13
DIN 382 HSS Tol. 6g
Applicazione: Per la riparazione di filetti danneggiati e in luoghi di difficile accesso
Application:
For cleaning and repairing demagedthreads and for general use in awkward places.
€
9,809,809,809,809,80
10,5010,5010,5012,4012,4017,0017,0024,0024,0024,0041,0049,0075,0075,0075,0075,00
124,00124,00172,00172,00172,00298,00298,00298,00390,00
193
Mf
M 3 x 0.35 19 x 5 26108M 4 x 0.35 19 x 5 26110M 4 x 0.5 19 x 5 26112M 5 x 0.5 19 x 5 26114M 5 x 0.75 19 x 7 26116M 6 x 0.5 19 x 5 26117M 6 x 0.75 19 x 7 26118M 7 x 0.75 22 x 9 26120M 8 x 0.5 22 x 9 26122M 8 x 0.75 22 x 9 26124M 8 x 1.0 22 x 9 26126M 9 x 0.75 22 x 9 26128M 9 x 1.0 22 x 9 26130M 10 x 0.75 27 x 11 26132M 10 x 1.0 27 x 11 26136M 10 x 1.25 27 x 11 26138M 11 x 1.0 27 x 11 26140M 11 x 1.25 27 x 11 26142M 12 x 0.75 36 x 10 26143M 12 x 1.0 36 x 10 26144M 12 x 1.25 36 x 10 26146M 12 x 1.5 36 x 10 26148M 13 x 1.0 36 x 10 26150M 13 x 1.5 36 x 10 26151M 14 x 0.75 36 x 10 26152M 14 x 1.0 36 x 10 26153M 14 x 1.25 36 x 10 26154M 14 x 1.5 36 x 10 26156M 15 x 1.0 36 x 10 26158M 15 x 1.5 36 x 10 26160M 16 x 1.0 41 x 14 26162M 16 x 1.25 41 x 14 26164M 16 x 1.5 41 x 14 26166M 18 x 1.0 41 x 14 26170M 18 x 1.25 41 x 14 26171M 18 x 1.5 41 x 14 26172M 18 x 2.0 41 x 14 26174M 20 x 1.0 41 x 14 26178M 20 x 1.25 41 x 14 26180M 20 x 1.5 41 x 14 26184M 20 x 2.0 41 x 14 26186M 21 x 1.5 41 x 14 26188M 22 x 1.0 50 x 16 26190M 22 x 1.25 50 x 16 26192M 22 x 1.5 50 x 16 26194M 22 x 2.0 50 x 16 26196M 23 x 1.5 50 x 16 26198M 24 x 1.0 50 x 16 26700M 24 x 1.25 50 x 16 26702M 24 x 1.5 50 x 16 26704
Nominal Diameter Width across flats Art.-No.mm mm
Hexagon Die Nutsmetric-fine ISO-thread DIN 13
Filiere esagonalifilettatura metrica fine ISO DIN 13
DIN 382 HSS Tol. 6g
€
19,0019,0019,0019,0019,0019,0019,0020,0020,0020,0020,0020,0020,0020,0020,0020,0028,0028,0028,0028,0028,0028,0032,0032,0032,0032,0032,0032,0038,0038,0039,0039,0039,0041,0041,0041,0041,0041,0041,0041,0041,0060,0060,0060,0060,0060,0060,0060,0060,0060,00
194
Mf
M 24 x 2.0 50 x 16 26706M 25 x 1.0 50 x 16 26707M 25 x 1.5 50 x 16 26708M 26 x 1.0 50 x 16 26710M 26 x 1.5 50 x 16 26712M 26 x 2.0 50 x 16 26714M 27 x 1.0 60 x 18 26717M 27 x 1.5 60 x 18 26716M 27 x 2.0 60 x 18 26718M 28 x 1.0 60 x 18 26720M 28 x 1.5 60 x 18 26722M 28 x 2.0 60 x 18 26724M 29 x 1.5 60 x 18 26726M 30 x 1.0 60 x 18 26728M 30 x 1.5 60 x 18 26730M 30 x 2.0 60 x 18 26732M 30 x 3.0 60 x 25 26734M 32 x 1.5 60 x 18 26736M 32 x 2.0 60 x 18 26735M 32 x 3.0 60 x 25 26737M 33 x 1.5 60 x 18 26738M 33 x 2.0 60 x 18 26740M 33 x 3.0 60 x 25 26742M 34 x 1.5 60 x 18 26744M 34 x 2.0 60 x 18 26746M 35 x 1.5 60 x 18 26748M 36 x 1.5 60 x 18 26750M 36 x 2.0 60 x 18 26752M 36 x 3.0 60 x 25 26754M 38 x 1.5 70 x 20 26756M 39 x 1.5 70 x 20 26758M 39 x 2.0 70 x 20 26760M 39 x 3.0 70 x 30 26762M 40 x 1.5 70 x 20 26764M 40 x 2.0 70 x 20 26766M 40 x 3.0 70 x 30 26768M 42 x 1.5 70 x 20 26770M 42 x 2.0 70 x 20 26772M 42 x 3.0 70 x 30 26774M 45 x 1.5 85 x 22 26776M 45 x 2.0 85 x 22 26778M 45 x 3.0 85 x 36 26780M 48 x 1.5 85 x 22 26782M 48 x 2.0 85 x 22 26784M 48 x 3.0 85 x 36 26786M 50 x 1.5 85 x 22 26788M 50 x 2.0 85 x 22 26790M 50 x 3.0 85 x 36 26792M 52 x 1.5 85 x 22 26794M 52 x 2.0 85 x 22 26796M 52 x 3.0 85 x 36 26798
Nominal Diameter Width across flats Art.-No.mm mm
Hexagon Die Nutsmetric-fine ISO-thread DIN 13
Filiere esagonalifilettatura metrica fine ISO DIN 13
DIN 382 HSS Tol. 6g
€
60,0087,0087,0087,0087,0087,0090,0090,0090,0090,0090,0090,0090,0090,0090,0090,0090,0090,0090,0090,0090,0090,0090,0090,0090,0090,0090,0090,0090,00
150,00150,00150,00150,00150,00150,00150,00150,00150,00150,00220,00220,00220,00220,00220,00220,00220,00220,00220,00220,00220,00220,00
195
BSW / BSF
BSWBSW 1/8 x 40 19 x 5 22106BSW 3/16 x 24 19 x 7 22110BSW 1/4 x 20 19 x 7 22114BSW 5/16 x 18 22 x 9 22116BSW 3/8 x 16 27 x 11 22118BSW 7/16 x 14 27 x 11 22120BSW 1/2 x 12 36 x 14 22122BSW 9/16 x 12 36 x 14 22124BSW 5/8 x 11 41 x 18 22126BSW 3/4 x 10 41 x 18 22130BSW 7/8 x 9 50 x 22 22134BSW 1" x 8 50 x 22 22138BSW 1.1/8 x 7 60 x 25 22142BSW 1.1/4 x 7 60 x 25 22146BSW 1.3/8 x 6 60 x 25 22150BSW 1.1/2 x 6 70 x 30 22154BSW 2" x 4.1/2 85 x 36 22170BSW 2.1/4 x 4 100 x 36 22172BSW 2.1/2 x 4 115 x 36 22174BSW 2.3/4 x 3.1/2 115 x 36 22176BSW 3" x 3.1/2 115 x 36 22178
BSFBSF 3/16 x 32 19 x 7 22510BSF 1/4 x 26 19 x 7 22514BSF 5/16 x 22 22 x 9 22516BSF 3/8 x 20 27 x 11 22518BSF 7/16 x 18 27 x 11 22520BSF 1/2 x 16 36 x 10 22522BSF 9/16 x 16 36 x 10 22524BSF 5/8 x 14 41 x 14 22526BSF 3/4 x 12 41 x 14 22530BSF 7/8 x 11 50 x 16 22534BSF 1" x 10 50 x 16 22538
Nominal Diameter Width across flats Art.-No.mm mm
Hexagon Die NutsWhitworth-thread BS 84
Filiere esagonalifilettatura Whitworth BS 84
DIN 382 HSS
Applicazione:
Per la riparazione di filetti danneggiati e in luoghi di difficile accesso
Application:
For cleaning and repairing demagedthreads and for general use in awkward places.
€
12,5012,5012,5013,0015,5015,5019,0019,0026,0026,0054,0054,0082,0082,0082,0098,00
128,00450,00450,00560,00560,00
14,0014,0015,5019,0019,0030,0030,0046,0046,0054,0054,00
196
UNC / UNF
UNCUNC 1/4 x 20 19 x 7 23114UNC 5/16 x 18 22 x 9 23116UNC 3/8 x 16 27 x 11 23118UNC 7/16 x 14 27 x 11 23120UNC 1/2 x 13 36 x 14 23122UNC 9/16 x 12 36 x 14 23124UNC 5/8 x 11 41 x 18 23126UNC 3/4 x 10 41 x 18 23130UNC 7/8 x 9 50 x 22 23134UNC 1" x 8 50 x 22 23138UNC 1.1/8 x 7 60 x 25 23142UNC 1.1/4 x 7 60 x 25 23146UNC 1.3/8 x 6 60 x 25 23150UNC 1.1/2 x 6 70 x 30 23154
UNFUNF 1/4 x 28 19 x 7 24114UNF 5/16 x 24 22 x 9 24116UNF 3/8 x 24 27 x 11 24118UNF 7/16 x 20 27 x 11 24120UNF 1/2 x 20 36 x 10 24122UNF 9/16 x 18 36 x 10 24124UNF 5/8 x 18 41 x 14 24126UNF 3/4 x 16 41 x 14 24130UNF 7/8 x 14 50 x 16 24134UNF 1" x 12 50 x 16 24138UNF 1.1/8 x 12 60 x 18 24142UNF 1.1/4 x 12 60 x 18 24146UNF 1.3/8 x 12 60 x 18 24150UNF 1.1/2 x 12 70 x 20 24154
Hexagon Die NutsWhitworth-thread BS 84
Filiere esagonalifilettatura unificata ANSI B1.1
DIN 382 HSS
Applicazione:
Per la riparazione di filetti danneggiati e in luoghi di difficile accesso
Application:
For cleaning and repairing demagedthreads and for general use in awkward places.
Nominal Diameter Width across flats Art.-No.mm
€
12,5013,0015,5015,5019,0019,0026,0026,0054,0054,0082,0082,0082,0098,00
12,5013,0015,5015,5019,0019,0026,0026,0054,0054,0082,0082,0082,0098,00
197
8-UN
UN 1.1/8 x 8 60 x 25 24171UN 1.1/4 x 8 60 x 25 24172UN 1.3/8 x 8 60 x 25 24173UN 1.1/2 x 8 70 x 30 24174UN 1.5/8 x 8 70 x 30 24175UN 1.3/4 x 8 85 x 36 24176UN 1.7/8 x 8 85 x 22 24177UN 2" x 8 85 x 22 24178UN 2.1/8 x 8 85 x 22 24179UN 2.1/4 x 8 100 x 22 24180UN 2.1/2 x 8 115 x 22 24181
Hexagon Die NutsUnified thread ANSI B 1.1
Filiere esagonalifilettatura unificata ANSI B1.1
DIN 382 HSS Tol. 2B
Applicazione:
Per la riparazione di filetti danneggiati e in luoghi di difficile accesso
Application:
For cleaning and repairing demagedthreads and for general use in awkward places.
Nominal Diameter Width across flats Art.-No.mm
€
82,0082,0082,00
150,00150,00150,00150,00150,00254,00254,00380,00
198
G (BSP)
G 1/8 x 28 27 x 11 25512G 1/4 x 19 36 x 10 25514G 3/8 x 19 41 x 14 25516G 1/2 x 14 41 x 14 25518G 5/8 x 14 50 x 16 25520G 3/4 x 14 50 x 16 25522G 7/8 x 14 60 x 18 25524G 1" x 11 60 x 18 25526G 1.1/8 x 11 70 x 20 25530G 1.1/4 x 11 70 x 20 25534G 1.3/8 x 11 85 x 22 25538G 1.1/2 x 11 85 x 22 25542G 1.5/8 x 11 85 x 22 25546G 1.3/4 x 11 100 x 22 25550G 2" x 11 100 x 22 25554
Nominal Diameter Width across flats Art.-No.mm
Hexagon Die NutsPipe-thread DIN ISO 228
Filiere esagonalifilettatura per tubi gas DIN ISO 228
DIN 382 HSS
Applicazione:
Per la riparazione di filetti danneggiati e in luoghi di difficile accesso
Application:
For cleaning and repairing demagedthreads and for general use in awkward places.
€
17,8020,7030,6030,6051,0051,0069,0069,00
102,00102,00169,00169,00169,00254,00254,00
199
R (BSPT)
R 1/8 x 28 27 x 11 23562R 1/4 x 19 36 x 14 23564R 3/8 x 19 41 x 15 23566R 1/2 x 14 50 x 19 23568R 3/4 x 14 60 x 20 23572R 1" x 11 60 x 25 23576R 1.1/4 x 11 85 x 26 23578R 1.1/2 x 11 85 x 26 23580R 2" x 11 100 x 31 23584
Nominal Diameter Width across flats Art.-No.mm
Hexagon Die Nutstapered pipe thread, taper 1:16, con. 55°
Filiere esagonalirfilettatura conica per tubi, cono 1:16
DIN 382 HSS
Applicazione:
Per la riparazione di filetti danneggiati e in luoghi di difficile accesso
Application:
For cleaning and repairing demagedthreads and for general use in awkward places.
€
37,0045,0057,0057,0090,00
134,00159,00258,00346,00
200
NPT
NPT 1/16 x 27 22 x 9 23510NPT 1/8 x 27 27 x 11 23512NPT 1/4 x 18 36 x 14 23514NPT 3/8 x 18 41 x 14 23516NPT 1/2 x 14 50 x 16 23518NPT 3/4 x 14 60 x 18 23522NPT 1" x 11.5 60 x 25 23526NPT 1.1/4 x 11.5 70 x 25 23528NPT 1.1/2 x 11.5 85 x 28 23530NPT 2" x 11.5 100 x 28 23534
Nominal Diameter Width across flats Art.-No.mm
Hexagon Die Nutsamerican tapered pipe thread, taper 1:16
Filiere esagonalifilettatura americana conica per tubi, cono 1:16
DIN 382 HSS
Applicazione:
Per la riparazione di filetti danneggiati e in luoghi di difficile accesso
Application:
For cleaning and repairing demagedthreads and for general use in awkward places.
€
34,5037,0045,0057,0057,0090,00
134,00159,00258,00346,00
201
M
M 3 x 0.5 19 x 5 28426M 4 x 0.7 19 x 5 28430M 5 x 0.8 19 x 7 28434M 6 x 1.0 19 x 7 28438M 8 x 1.25 22 x 9 28442M 10 x 1.5 27 x 11 28446M 12 x 1.75 36 x 14 28450M 14 x 2.0 36 x 14 28454M 16 x 2.0 41 x 18 28458M 18 x 2.5 41 x 18 28462M 20 x 2.5 41 x 18 28466M 22 x 2.5 50 x 22 28470M 24 x 3.0 50 x 22 28474M 27 x 3.0 60 x 25 28476M 30 x 3.5 60 x 25 28478M 33 x 3.5 60 x 25 28480M 36 x 4.0 60 x 25 28482M 39 x 4.0 70 x 30 28484M 42 x 4.5 70 x 30 28486M 45 x 4.5 85 x 36 28488M 48 x 5.0 85 x 36 28490M 52 x 5.0 85 x 36 28492
Nominal Diameter Width across flats Art.-No.mm
Hexagon Die Nuts, Left Handmetric ISO-thread DIN 13
Filiere esagonali, filetto sinistrofilettatura metrica ISO DIN 13
DIN 382 HSS
Applicazione:
Per la riparazione di filetti danneggiati e in luoghi di difficile accesso
Application:
For cleaning and repairing demagedthreads and for general use in awkward places.
€
11,5011,5012,8012,8014,0019,7030,0030,0047,0047,0047,0063,0063,0097,0097,0097,0097,00
162,00162,00229,00229,00229,00
202
G (BSP)
G 1/8 x 28 27 x 11 25612G 1/4 x 19 36 x 10 25614G 3/8 x 19 41 x 14 25616G 1/2 x 14 41 x 14 25618G 5/8 x 14 50 x 16 25620G 3/4 x 14 50 x 16 25622G 1" x 11 60 x 18 25626G 1.1/8 x 11 70 x 20 25630G 1.1/4 x 11 70 x 20 25634G 1.3/8 x 11 85 x 22 25638G 1.1/2 x 11 85 x 22 25642G 1.3/4 x 11 100 x 22 25650G 2" x 11 100 x 22 25654
Nominal Diameter Width across flats Art.-No.mm
Hexagon Die Nuts, Left HandPipe-thread DIN ISO 228
Filiere esagonali, filetto sinistrofilettatura per tubi gas DIN ISO 228
DIN 382 HSS
Applicazione:
Per la riparazione di filetti danneggiati e in luoghi di difficile accesso
Application:
For cleaning and repairing demagedthreads and for general use in awkward places.
€
30,0034,0050,0050,0067,0067,0086,00
133,00133,00220,00220,00330,00330,00
203
because available because reliable because you
203
204 - 206
207 - 213
213, 215, 220
214, 220
214
215
216 - 219
217, 221, 223
221 - 225
223 - 225
226 - 228
SETSASSORTIMENTO
HexTap
Hand Taps and DiesMaschi a mano e filiera
Hand TapsMaschi a Mano
Round DiesFiliere
Hexagon Die NutsFiliere esagonali
Short Machine TapsMaschi macchina corti
Machine TapsMaschi a macchina
Combined TapsMaschi combinati con punte
Tools with hexagon shankUtensili con attacco esagonale
Q.C.-BoxesCassetta Q. C.
DisplaysPresentatore
204
MM 3-4-5-6-8-10-12-14-16-18-20 48601
M 3-4-5-6-8-10-12-14-16-18-20-22-24 48602
M 3-4-5-6-8-10-12-14-16-18-20-22-24-27-30 48603
MfM 4x0.5 - 5x0.5 - 6x0.75 - 8x0.75 - 8x1 - 10x1M 12x1 - 12x1.5 - 14x1.25 - 14x1.5 - 16x1.5M 18x1.5 - M 20x1.5
48605
M 4x0.5 - 5x0.5 - 6x0.75 - 8x0.75 - 8x1 - 10x1M 12x1 - 12x1.5 - 14x1.25 - 14x1.5 - 16x1.5M 18x1.5 - M 20x1.5 - 22x1.5 - 24x1. 5
48606
G (BSP)G 1/8 - 1/4 - 3/8 - 1/2 - 3/4 - 1" 48608
G 1/8 - 1/4 - 3/8 - 1/2 - 3/4 - 1" - 1.1/4 - 1.1/2 48609
HexTap Setsin wooden boxes
Assortimento HexTap in cassetta di legna
Art.-No €
143,00
220,00
340,00
196,00
288,00
185,00
427,00
205
MM 3-4-5-6-8-10-12-14-16-18-20 48621
M 3-4-5-6-8-10-12-14-16-18-20-22-24 48622
M 3-4-5-6-8-10-12-14-16-18-20-22-24-27-30 48623
MfM 4x0.5 - 5x0.5 - 6x0.75 - 8x0.75 - 8x1 - 10x1M 12x1 - 12x1.5 - 14x1.25 - 14x1.5 - 16x1.5M 18x1.5 - M 20x1.5
48625
M 4x0.5 - 5x0.5 - 6x0.75 - 8x0.75 - 8x1 - 10x1M 12x1 - 12x1.5 - 14x1.25 - 14x1.5 - 16x1.5M 18x1.5 - M 20x1.5 - 22x1.5 - 24x1.5
48626
G (BSP)G 1/8 - 1/4 - 3/8 - 1/2 - 3/4 - 1" 48628
G 1/8 - 1/4 - 3/8 - 1/2 - 3/4 - 1" - 1.1/4 - 1.1/2 48629
HexTap Setsin wooden boxes
Assortimento HexTapin cassetta di legna
Art.-No €
277,00
405,00
635,00
390,00
533,00
346,00
798,00
206
MM 3-4-5-6-8-10-12-14-16-18-20 48641
M 3-4-5-6-8-10-12-14-16-18-20-22-24 48642
M 3-4-5-6-8-10-12-14-16-18-20-22-24-27-30 48643
MfM 4x0.5 - 5x0.5 - 6x0.75 - 8x0.75 - 8x1 - 10x1M 12x1 - 12x1.5 - 14x1.25 - 14x1.5 - 16x1.5M 18x1.5 - M 20x1.5
48645
M 4x0.5 - 5x0.5 - 6x0.75 - 8x0.75 - 8x1 - 10x1M 12x1 - 12x1.5 - 14x1.25 - 14x1.5 - 16x1.5M 18x1.5 - M 20x1.5 - 22x1.5 - 24x1.5
48646
G (BSP)G 1/8 - 1/4 - 3/8 - 1/2 - 3/4 - 1" 48648
G 1/8 - 1/4 - 3/8 - 1/2 - 3/4 - 1" - 1.1/4 - 1.1/2 48649
HexTap Setsin wooden boxes
Assortimento HexTapin cassetta di legna
Art.-No €
312,00
455,00
692,00
418,00
594,00
381,00
860,00
207
MM 1-1.2-1.4-1.7-2.0-2.3-2.6M 3-3.5-4-5-6-8-10
No. 0No. 1
16 x 525 x 9
20 x 530 x 11
20 x 7 No. 1 48002
M 3-4-5-6-7-8-9-10-11-12 No. 1 + 2 20 x 530 x 11
20 x 738 x 14
25 x 9 No. 1 48003
M 5-6-7-8-9-10-11-12 No. 1 + 2 20 x 730 x 11
25 x 938 x 14
No. 1 48004
M 5-6-7-8-9-10-11-12-14-16M 18-20
No. 1 + 3 20 x 738 x 14
25 x 945 x 18
30 x 11 48005
M 3-4-5-6-8-10-12-14-16-18-20M 22-24
No. 1 + 4 20 x 530 x 1155 x 22
20 x 738 x 14
25 x 945 x 18
48006
M 5-6-8-10-12-14-16-18-20-22M 24-27-30
No. 1No. 3 + 5
20 x 738 x 1465 x 25
25 x 945 x 18
30 x 1155 x 22
48007
MfMf 3 x 0.35-4 x 0.5-5 x 0.5Mf 6 x 0.75-8 x 0.75-8 x 1.0Mf 10 x 1.0-12 x 1.5
No. 1 + 2 20 x 538 x 10
25 x 9 30 x 11 No. 1 48010
Mf 6 x 0.75-8 x 0.75-8 x 1.0-10 x 1.0Mf 12 x 1.0-12 x 1.5-14 x 1.25-14 x 1.5Mf 16 x 1.5-18 x 1.5-20 x 1.5
No. 1 + 3 20 x 738 x 10
25 x 945 x14
30 x 11 48011
Mf 6 x 0.75-8 x 0.75-8 x 1.0-10 x 1.0Mf 12 x 1.0-12 x 1.5-14 x 1.25-14 x 1.5Mf 16 x 1.5-18 x 1.5-20 x 1.5-22 x 1.5Mf 24 x 1.5
No. 1 + 4 20 x 738 x 10
25 x 945 x 14
30 x 1155 x 16
48012
Tap & Die Setsin metal casesDIN standards
Utensili per filettare in assortimento in cassetta metallicaversione DIN
Art.-No €
345,00
320,00
294,00
483,00
654,00
1.150,00
250,00
440,00
635,00
208
G (BSP)G 1/8-1/4-3/8-1/2-3/4-1" No. 1 + 3 + 5 30 x 11
55 x 1638 x 1065 x 18
45 x 14 48020
G 1/8-1/4-3/8-1/2-5/8-3/4-7/8-1" No. 1 + 3 + 5 30 x 1155 x 16
38 x 1065 x 18
45 x 14 48021
G 1/4-3/8-1/2-3/4-1"-1.1/4-1.1/2 No. 2 + 4 + 7 38 x 1065 x 18
45 x 1475 x 20
55 x 1690 x 22
48022
BSWBSW 1/8-3/16-1/4-5/16-3/8-7/16-1/2 No. 1 + 2 20 x 5
30 x 1120 x 738 x 14
25 x 9 No. 1 48030
BSW 1/4-5/16-3/8-7/16-1/2 No. 1 + 2 20 x 738 x 14
25 x 9 30 x 11 No. 1 48031
BSW 1/4-5/16-3/8-7/16-1/2-5/8-3/4 No. 1 + 3 20 x 738 x 14
25 x 945 x 18
30 x 11 48032
BSW 1/4-5/16-3/8-7/16-1/2-5/8BSW 3/4-7/8-1"
No. 1 + 4 20 x 738 x 14
25 x 945 x 18
30 x 1155 x 22
48034
BSW 1/4-5/16-3/8-7/16-1/2-5/8-3/4BSW 7/8-1"-1.1/8-1.1/4-1.3/8-1.1/2"
No. 1No. 3 + 5
20 x 738 x 1465 x 25
25 x 945 x 18
30 x 1155 x 22
48035
BSFBSF 1/4-5/16-3/8-7/16-1/2 No. 1 + 2 20 x 7
38 x 1025 x 9 30 x 11 No. 1 48041
BSF 1/4-5/16-3/8-7/16-1/2-5/8-3/4 No. 1 + 3 20 x 738 x 10
25 x 945 x 14
30 x 11 48042
BSF 1/4-5/16-3/8-7/16-1/2-5/8BSF 3/4-7/8-1"
No. 1 + 4 20 x 738 x 10
25 x 945 x 14
30 x 1155 x 16
48044
BSW / BSFBSW/BSF 1/4-5/16-3/8-7/16-1/2BSW/BSF 5/8-3/4
No. 1 + 3 20 x 738 x 14
25 x 945 x 18
30 x 11 48046
Tap & Die Setsin metal casesDIN standards
Utensili per filettare in assortimento in cassetta metallicaversione DIN
Art.-No €
540,00
724,00
1.454,00
280,00
236,00
415,00
620,00
1.570,00
230,00
395,00
605,00
670,00
209
NPTNPT 1/8-1/4-3/8-1/2-3/4-1" No. 1 + 3 + 5 30 x 11
55 x 2238 x 1465 x 25
45 x 18 48025
NPT 1/8-1/4-3/8-1/2-3/4-1"NPT 1.1/4-1.1/2-2"
No. 2 + 4 + 7 30 x 1155 x 2290 x 36
38 x 1465 x 25
105 x 36
45 x 18 75 x 30
48027
UNCUNC 1/4-5/16-3/8-7/16-1/2 No. 1 + 2 20 x 7
38 x 1425 x 9 30 x 11 No. 1 48050
UNC 1/4-5/16-3/8-7/16-1/2-5/8-3/4 No. 1 + 3 20 x 738 x 14
25 x 945 x 18
30 x 11 48051
UNC 1/4-5/16-3/8-7/16-1/2-5/8UNC 3/4-7/8-1"
No. 1 + 4 20 x 738 x 14
25 x 945 x 18
30 x 1155 x 22
48053
UNC 1/4-5/16-3/8-7/16-1/2-5/8-3/4UNC 7/8-1"-1.1/8-1.1/4-1.3/8-1.1/2"
No. 1No. 3 + 5
20 x 738 x 1465 x 25
25 x 945 x 18
30 x 1155 x 22
48054
UNFUNF 1/4-5/16-3/8-7/16-1/2 No. 1 + 2 20 x 7
38 x 1025 x 9 30 x 11 No. 1 48060
UNF 1/4-5/16-3/8-7/16-1/2-5/8-3/4 No. 1 + 3 20 x 738 x 10
25 x 945 x 14
30 x 11 48061
UNF 1/4-5/16-3/8-7/16-1/2-5/8UNF 3/4-7/8-1"
No. 1 + 4 20 x 738 x 10
25 x 945 x 14
30 x 1155 x 16
48063
UNC / UNFUNC/UNF 1/4-5/16-3/8-7/16-1/2UNC/UNF 5/8-3/4
No. 1 + 3 20 x 738 x 14
25 x 945 x 18
30 x 11 48066
Tap & Die Setsin metal casesDIN standards
Utensili per filettare in assortimento in cassetta metallicaversione DIN
Art.-No €
698,00
2.606,00
236,00
415,00
620,00
1.570,00
218,00
365,00
551,00
670,00
210
P.V.1 M 3-4-5-6-8M 10-12
2.5/3.3/4.2/5.06.8/8.5/10.2 mm
No. 1No. 2
20 x 530 x 11
20 x 738 x 14
25 x 9 No. 1 49101
M 3-4-5-6-8M 10-12
No. 1No. 2
20 x 530 x 11
20 x 738 x 14
25 x 9 49107
HSSE M 3-4-5-6-8M 10-12
2.5/3.3/4.2/5.06.8/8.5/10.2 mm
No. 1No. 2
20 x 530 x 11
20 x 738 x 14
25 x 9 No. 1 49151
LH M 3-4-5-6-8M 10-12
2.5/3.3/4.2/5.06.8/8.5/10.2 mm
No. 1No. 2
20 x 530 x 11
20 x 738 x 14
25 x 9 No. 1 49171
M 3-4-5-6-8M 10-12
2.5/3.3/4.2/5.06.8/8.5/10.2 mm
No. 1No. 2
20 x 530 x 11
20 x 738 x 14
25 x 9 49111
Hand Taps DIN 352in sets of 3 piecesRound Dies DIN 223
Maschi a mano DIN 352Serie 3 pezziFiliere tonde DIN 223
Tap & Die Setsin metal casesDIN standards
Utensili per filettare in assortimento in cassetta metallicaversione DIN
Art.-No €
170,00
154,00
252,00
248,00
140,00
211
F.Z.1 M 3-4-5-6-8M 10-12
2.5/3.3/4.2/5.06.8/8.5/10.2 mm
No. 1No. 2
20 x 530 x 11
20 x 738 x 14
25 x 9 No. 1 49150
S.F.1 M 3-4-5-6-8M 10-12
2.5/3.3/4.2/5.06.8/8.5/10.2 mm
No. 1No. 2
20 x 530 x 11
20 x 738 x 14
25 x 9 No. 1 49106
Tap & Die Setsin metal casesDIN standards
Utensili per filettare in assortimento in cassetta metallicaversione DIN
S.F. 1Hand Taps DIN 352, HSS-GRound Dies DIN 223, HSS+ 7 Guides for Round Dies
Maschi a mano DIN 352, HSS-GFiliere DIN 223, HSS+ 7 guida per filiera
F.Z. 1Hand Taps DIN 352, HSSERougher pilotedRound Dies DIN 223, HSSE+ 7 Guides for Round Dies
Maschi a mano DIN 352, HSSESgrossatore con guida Filiere DIN 223, HSSE+ 7 guida per filiera
Art.-No €
258,00
187,00
212
P.V.2 M 3-4-5-6-8-10-12-14M 16-18-20
No. 1No. 3
20 x 530 x 11
20 x 738 x 14
25 x 945 x 18
No. 1No. 2
49201
HSSE M 3-4-5-6-8-10-12-14M 16-18-20
No. 1No. 3
20 x 530 x 11
20 x 738 x 14
25 x 945 x 18
49251
LH M 3-4-5-6-8-10-12-14M 16-18-20
No. 1No. 3
20 x 530 x 11
20 x 738 x 14
25 x 945 x 18
49271
P.V.3 M 5-6-8-10-12-14M 16-18-20
No. 1No. 3
20 x 738 x 14
25 x 945 x 18
30 x 11 No. 1No. 2
49301
P.V.5 M 3-4-5-6-8-10-12-14M 16-18-20
No. 1No. 3
20 x 530 x 11
20 x 738 x 14
25 x 945 x 18
49205
Tap & Die Setsin metal casesDIN standards
Utensili per filettare in assortimento in cassetta metallicaversione DIN
Hand Taps DIN 352in sets of 3 piecesRound Dies DIN 223
Maschi a mano DIN 352Serie 3 pezziFiliere tonde DIN 223
Art.-No €
310,00
588,00
530,00
309,00
370,00
213
P.V.22 M 3-4-5-6-8
M 10-122.5/3.3/4.2/5.06.8/8.5/10.2 mm
No. 1.1/2 49510
P.V.23 M 3-4-5-6-8M 10-12
2.5/3.3/4.2/5.06.8/8.5/10.2 mm
No. 1.1/2 No. 1 49511
P.V.12 M 3-4-5-6-8-10-12 No. 1.1/2 25 x 9 No. 1 49501
P.V.15 M 3-4-5-6-8-10-12 No. 1.1/2 25 x 9 No. 1 49505
Tap & Die Setsin metal cases
Utensili per filettare in assortimento in cassetta metallica
Hand Taps DIN 352in sets of 3 pieces
Maschi a mano DIN 352Serie 3 pezzi
Art.-No
Art.-No
Hand Taps DIN 352in sets of 3 piecesRound Dies 25 x 9 mm ø
Maschi a mano DIN 352Serie 3 pezziFiliere tonde 25 x 9 ø
€
90,00
97,00
€
103,00
115,00
214
P.V.97 M 3-4-5-6-8-10-12 49521
P.V.98 HSSE M 3-4-5-6-8-10-12 49522
P.V.99 M 3-4-5-6-8-10-12 49520
UNC 1/4-5/16-3/8-7/16-1/2 49530
UNF 1/4-5/16-3/8-7/16-1/2 49540
P.V.92 o/d 25x9 M 3-4-5-6-8-10-12 49525
P.V.14 M 3-4-5-6-8-10-12 20 x 5 30 x 11
20 x 7 38 x 14
25 x 9 49599
LH M 3-4-5-6-8-10-12 20 x 5 30 x 11
20 x 7 38 x 14
25 x 9 49598
Die Setsin metal casesDIN standards
Utensili per filettare in assortimento in cassetta metallicaversione DIN
Round Dies DIN 223+ 7 Guides
Filiere tonde DIN 223+ 7 guida per filiera
Art.-No
Art.-No
€
66,00
86,00
77,00
105,00
105,00
45,00
€
75,00
101,00
215
P.K.20 M 3-4-5-6-8-10-12 No. 1.1/2 47001P.K.21 M 3-4-5-6-8-10-12 No. 1.1/2 No. 1 47005HSSE M 3-4-5-6-8-10-12 No. 1.1/2 No. 1 47055LH M 3-4-5-6-8-10-12 No. 1.1/2 No. 1 47075
P.K.25 M 3-4-5-6-8M 10-12
2.5/3.3/4.2/5.06.8/8.5/10.2 mm
No. 1.1/2 No. 1 47605
P.K.26 M 3-4-5-6-8M 10-12
2.5/3.3/4.2/5.06.8/8.5/10.2 mm
No. 1.1/2 47601
Tap Setsin plastic boxesDIN standards
Utensili per filettare in assortimento in cassetta di plasticaversione DIN
Hand Taps DIN 352in sets of 3 pieces
Maschi a mano DIN 352Serie 3 pezzi
Short Machine Taps DIN 352,Spiral Point
Maschi a macchina corti DIN 352/Bcon imbocco corretto
Art.-No
Art.-No
€
69,0077,00
120,00107,00
€
55,00
49,00
216
P.K.85 M 3-4-5-6-8-10 2.5/3.3/4.2/5.0/6.8/8.5 80501
Form B M 3-4-5-6-8-10-12 80500Form B-AZ M 3-4-5-6-8-10-12 80900Form C/35°RSP M 3-4-5-6-8-10-12 80700
Tap & Die Setsin plastic boxISO standards
Utensili per filettare in assortimento in cassetta di plastica
Machine Taps ISO 529Spiral Point (Form B)
Maschi a macchina ISO 529con imbocco corretto (Forma B)
Machine Taps ISO 529
Maschi a macchina ISO 529
Art.-No
Art.-No
€
68,00
€
39,0052,0045,00
217
P.K.40 M 3-4-5-6-8-10-12 47901P.K.41 M 3-4-5-6-8-10-12 TIN 47921
P.K.370 M 3-4-5-6-8-10-12 47837P.K.700 BSW 1/8-5/32-3/16-1/4-5/16-3/8-1/2 47870
Combined Taps HSSE
Maschi combinati con punte HSSE
Machine Tap Setsin plastic boxes
Maschi a macchina in cassetta di plastica
Machine Taps HSSESpiral Point and Spiral Flute
Maschi a macchina HSSEcon imbocco corretto + con spirale destra a 35°
Art.-No
Art.-No
€
120,00200,00
€
126,50127,00
218
P.K.28 M 3-4-5-6-8-10-12 47815P.K.29 M 3-4-5-6-8-10-12 TIN 47825
M 3-4-5-6-8-10-12 47853M 3-4-5-6-8-10-12 47854M 3-4-5-6-8-10-12 47852
P.K.35 M 3-4-5-6-8-10-12 2.5/3.3/4.2/5.0/6.8/8.5/10.2 mm 47835P.K.36 M 3-4-5-6-8-10-12 TIN 2.5/3.3/4.2/5.0/6.8/8.5/10.2 mm 47836
M 3-4-5-6-8-10-12 2.5/3.3/4.2/5.0/6.8/8.5/10.2 mm 47856M 3-4-5-6-8-10-12 2.5/3.3/4.2/5.0/6.8/8.5/10.2 mm 47857M 3-4-5-6-8-10-12 2.5/3.3/4.2/5.0/6.8/8.5/10.2 mm 47855
Machine Tap Setsin plastic boxes
Maschi a macchina in cassetta di plastica
Machine Taps HSSESpiral Point
Maschi a macchina HSSEcon imbocco corretto
Art.-No €
54,0095,0082,0082,0090,0064,00
105,00100,00108,00108,00
219
P.K.30 M 3-4-5-6-8-10-12 47817P.K.31 M 3-4-5-6-8-10-12 TIN 47827
M 3-4-5-6-8-10-12 47863M 3-4-5-6-8-10-12 47864M 3-4-5-6-8-10-12 47862
P.K.47 M 3-4-5-6-8-10-12 2.5/3.3/4.2/5.0/6.8/8.5/10.2 mm 47847P.K.48 M 3-4-5-6-8-10-12 TIN 2.5/3.3/4.2/5.0/6.8/8.5/10.2 mm 47848
M 3-4-5-6-8-10-12 2.5/3.3/4.2/5.0/6.8/8.5/10.2 mm 47866M 3-4-5-6-8-10-12 2.5/3.3/4.2/5.0/6.8/8.5/10.2 mm 47867M 3-4-5-6-8-10-12 2.5/3.3/4.2/5.0/6.8/8.5/10.2 mm 47865
Machine Tap Setsin plastic boxes
Maschi a macchina in cassetta di plastica
Machine Taps HSSESpiral Flute
Maschi a macchina HSSEcon spirale destra a 35°
Art.-No €
62,50101,0098,0098,00
108,0074,00
109,00118,00130,00130,00
220
M 20x1.5 - M 25x1.25 M 20x1.5 - M 25x1.25 42 mm 18012
M 20x1.5 18002M 25x1.5 18003
M 1-1.2-1.4-1.7M 2.0-2.3-2.6
No. 0 48001
Hand Taps DIN 352in sets of 3 pieces
Maschi a mano DIN 352Serie 3 pezzi
Tap Setsin wooden boxesDIN standards
Utensili per filettare in assortimento in cassetta di legnaversione DIN
Electrical Conduit Setin plastic box
Assortimento per tubatura elettricain cassetta di plastica
Art.-No
Art.-No
€
49,50
6,806,80
€
185,00
221
M 3-4-5-6-8-10 2.5/3.3/4.2/5.0/6.8/8.5 mm 1/4" 67020
M 3-4-5-6-8-10 1/4" 67200M 3-4-5-6-8-10 TIN 1/4" 67209
UNC No.8 - No.10 - No.12 - 1/4 - 5/16 - 3/8" 1/4" 67272UNF No.8 - No.10 - No.12 - 1/4 - 5/16 - 3/8" 1/4" 67274
HSS-G
Combined-Bit-Setin pastic box
Assortimento di maschi a macchina combinatiin cassetta di plastica
Threading-Bit-Setwith Twist-Drill-Bits in plastic box
Assortimento di maschi e punte con attacco esagonale 1/4” in cassetta di plastica
Art.-No
Art.-No
Form D M 3-10 HSS-G Tol. ISO2/6H
€
46,0087,00
59,0059,00
€
42,00
222
M 3-4-5-6-8-10 67010
1.0 / 1.5 / 2.0 / 2.5 / 3.0 / 3.54.0 / 4.5 / 5.0 / 5.5 / 6.0 / 6.5 671007.0 / 7.5 / 8.0 / 8.5 / 9.0 / 9.5 / 10.0
6.3/8.3/10.4/12.4/16.5/20,5 67300
Threading-Bit-Setin plastic box
Assortimento di maschi con attacco esagonale 1/4”in cassetta di plastica
Form D M 3-10 HSS-G Tol. ISO2/6H
Drill Bit-Setin plastic box
Assortimento di punte con attacco esagonale 1/4”in cassetta di plastica
1,0 - 10,0 mm HSS-G
Countersink-Bit-Setin plastic box
Assortimento di frese per svasare con attacco esagonale 1/4”, in cassetta di plastica
6,3 - 20,5 mm HSS
Art.-No
Art.-No
Art.-No
€
28,00
€
56,00
€
56,00
223
M 3-4-5-6-8-101/4"
67421
M 3-4-5-6-8-101/4" 1/4"
67422
M 3 - M 10 HSS-G
Q.C. 1
Combined Bits
Assortimento di maschi a macchina combinati
Q.C. 2
Threading-Bits
Maschi con attacco esagonale 1/4”
M 3 - M 10 HSS-G
non-magnetic
non-magnetic
non-magnetic
Art.-No
Art.-No
€
57,00
€
50,50
224
6.3/8.3/10.4/12.4/16.5/20.5 non-magnetic1/4" 1/4"
67423
3.0/4.0/5.0/6.0/8.0/10.0 6 Bits: 2xPH1, 3xPH2, 1xPH3
6 Torx Bits: T10, T15, T20, T25, T30, T40 1/4"
67424
Q.C. 4
Drill Bits
Puntecon attacco esagonale 1/4”
3,0 - 10,0 mm HSS-G
Q.C. 3
Countersink Bits
Frese per svasare con attacco esagonale 1/4”
6,3 - 20,5 mm HSS
non-magnetic
non-magnetic
Art.-No
Art.-No
€
75,50
€
37,50
225
3.0 / 4.0 / 5.0 / 6.0 / 8.0 / 10.0 3.0 / 4.0 / 5.0 / 6.0 / 8.0 / 10,0 67101
3.0/4.0/5.0/6.0/8.0/10.0 6 Bits: 2xPZ1, 3xPZ2, 1xPZ3
6 Torx Bits: T10, T15, T20, T25, T30, T40 1/4"
67425
Q.C. 5
WOOD Drill Bits
Punte per legnacon attacco esagonale 1/4”
3,0 - 10,0 mm HSS-G
Drill Bit-Set in plastic box
Punte con attacco esagonale 1/4” in cassetta di plastica
3,0 - 10,0 mm HSS-G
magnetic
Art.-No
Art.-No
for wood / per legna
€
37,50
€
43,00
226
SD 2600 48926
SD 600048960
Art.-No.
Art.-No.
€ 1.750,00
€ 546,00
227
SD 67048967
SD 3000
Art.-No.
€ 725,00
228
SD 672
48980 6720048981 67200
67020
48982 67200
67100
48983 67200
67300
Art.-No Contents
20 Sets
10 Sets
10 Sets
10 Sets
10 Sets
10 Sets
10 Sets
€
920,00
880,00
995,00
1.020,00
229
because available because reliable because you
229
230
232
232
233
233
234
234
235
236
237
238
239
240
Surface FinishesTrattamento della superficie
Engineering drawing of TapsDisegni tecnici di maschi
Leeds of Hand TapsImbocco maschi a mano
Engineering drawing of DiesDisegni tecnici di filiere
Leads of Machine TapsImbocco maschi a macchina
Tolerance classesClasse di tolleranza
Conversion table pitch per inch into mmTabella di conversione passo del filetto pollice a mm
Conversion table of tensile strength and hardnessTabella conversione resistenza e durezza
Conversion table of cutting speedConversione della Velocità di taglio
Recommended cutting speedVelocità di taglio raccomandato
Conversion table inch-mmConversione pollice-mm
Recommended outside diameter for bolt threadDiametri dei perni da fillettare racomandato
Recommended tapping drill sizes Prefori per maschi raccomandato
TECHNICAL INFORMATIONINFORMAZIONI TECNICHE
230
SURFACE FINISHESACABADOS SUPEFICIALES
Each VÖLKEL Tap and each VÖLKEL Die can be supplied with any coating or surface finish quickly.
Ogni maschi VÖLKEL e filiere VÖLKEL può essere offerto con qualsiasi rivestimento o trat-tamenti termici breve
231
SURFACE FINISHESACABADOS SUPEFICIALES
Steam Tempered:
An iron oxide film is createdon the tool surface by heattreatment.This improves the adhesion ofthe coolant and as a resulthelps to prevent cold weldingof the chip to the tool surface.
Vaporizzazione
Attraverso un trattamento termico sull’utensile finito si deposita uno strato di ossido di ferro sulla superficie dell’utensile.Questo strato migliora l’aderenza del refrig-erante e del lubrificante, riducendo così il rischio di rottura del film lubrificante evitando la formazione di saldature a freddo di scorie.
Nitriding:
The surface hardness is increased by enriching the surface of the tap with nitrogen. This results in high abrasion resistance and improvedanti-friction properties.
Nitrurazione
L’arricchimento della superficie del maschio con azoto permette di aumentare la durezza della superficie dell’utensile. Si ottiene altresì un miglio-ramento della resistenza all’abrasione e delle proprietà antifrizione.
TiN (Titanium Nitride Coating):
Following PVD processing, the tapundergoes titanium nitride vapour-deposition within the vacuum chamberat approx. 500°C. Excellent anti-frictionproperties and high resistance to wearand abrasion result from the reducedsurface roughness and remarkablehardness.TIN coated taps can be employed usingcinsiderably faster cutting speeds.
TiN (Rivestimento al Nitruro di Titanio):
Attraverso il procedimento di metallizzazione a vuoto a 500°C ca. (PVD) viene depositato sull’utensile uno strato vaporizzato di nitrito di Titanio. La riduzione della rugosità della super-ficie e la durezza estrema permettono di otte-nere eccellenti proprietà antifrizione e una forte resistenza all’usura e all’abrasione.I maschi rivestiti al TiN possono essere utilizzati con velocità di taglio nettamente più elevate.
TiCN (Titanium CarboNitride Coating):
The TiCN-coating is particularly suitable for wear-re-sistant and abrasive material. The TiCN-coating has an hardness of 3.000 HV and thus is harder as the TiN-coating (2.600 HV). As a result the TiCN-coating has an excellent wear-resistance. Also the hardness and the toughness is higher, the heat resistance is reduced. Therefore intensive and optimum cooling is essential.
TiCN (Rivestimento con carbonitruro di titanio):
Il rivestimento TiCN è particolarmente indicato per acciai ad elevata resistenza all’abrasione e ma-teriali altamente abrasivi. Il rivestimento TiCN ha una durezza pari a 3.000 HV quindi risulta essere più duro rispetto al rivestimento TiN (2.600 HV); ciò comporta un miglioramento della resistenza all’usura dell’utensile. Una maggiore tenacità all’abrasione è contrapposta a una minore resist-enza alle elevate temperature. Perciò è fondamen-tale una ottima refrigerazione dell’utensile rivestito.
232
D Nominal diameter Diametro nominaleD2 Shank diameter Diametro del gamboD3 Neck diameter Diametro dell’imboccoD4 Point diameter Diametro del collarinoD5 Web diameter Diametro del nucleoL1 Overall length Lunghezza totaleL2 Thread length Lunghezza filettoL3 Neck length Lunghezza utileL4 Square length Lunghezza quadro P Pitch Passoa Square size Quadrom Land width Larghezza settoren Flute width Larghezza scanalaturas Thread relief Spoglia sul filetto� Relief angle Angolo di spoglia sul filetto� Rake angle Angolo di taglio�1 Thread angle Angolo del profilo
6-8 threads/spire
2-3 threads/spire
4-5 threads/spire
5-6 threads/spire
2-3 threads/spire
Nr. 1 Rougher, 5-6 Threads LeadSgrossatore, Imbocco a 6-8 spire
Nr. 2Finisher, 2-3 Threads LeadFinitore, Imbocco a 2-3 spire
Leads of Hand Taps, Sets of 3 pcs.Lunghezza di Imbocco – Maschi a mano, serie 3 pezzi
Leads of Hand Taps, Sets of 2 pcs.Orden de los machos, juegos de 2 piezas
Nr. 1 Rougher, 6-8 Threads Lead Sgrossatore, Imbocco a 6-8 spire
Nr. 2Intermediate, 4-5 Threads Lead Intermedio, Imbocco a 4-5 spire
Nr. 3Finisher, 2-3 Threads Lead Finitore, Imbocco a 2-3 spire
233
6-8 threads/spire
4-5 threads/spire
2-3 threads/spire
4-5 threads/spire
2-3 threads/spire
4-5 threads/spire
Clearance Hole Foro di evacuazione Lead
imbocco
Gun Nose imbocco corretto
Form A split/Forma A aperta Form B solid/ Forma B chiuso
D Outside diameter Diametro esternoE Width of die Spessorea Width of land Ampiezza del denteb Hole for holding screws Diametro fissaggio vite� Rake angle Angolo di taglio� Lead angle Angolo dell‘imbocco� Angle of gun nose Angolo dell’imbocco corretto
Form A 6-8 Threads Lead, for short through holesImbocco a 6-8 spire, per fori passanti corti
Form B4-5 Threads Lead with Spiral Point for through holesImbocco a 4-5 spire con imbocco corretto, per tutti i fori passanti
Form C2-3 Threads Lead, for blind holesImbocco a 2-3 spire, per fori ciechi
Form D4-5 Threads Lead, for through and blind holesImbocco a 4-5 spire, per fori passante e ciechi
Form C/35° RSP2-3 Threads Lead, 35° Spiral Flute, for blind holesImbocco a 2-3 spire spirale destra a 35°, per fori ciechi
Form B-AZ4-5 Threads Lead with Spiral Point and interrupted threads for through holesImbocco a 4-5 spire e denti alternati per fori passanti
234
4H ISO 1 4H, 5H
6H ISO 2 4G, 5G, 6H
6G ISO 3 6G, 7H, 8H
7G ./. 7G, 8G, (6E)
4HX ISO 1X 4H, 5H
6HX ISO 2X 6H
6GX ISO 3X 6G
6H + 0,1 ISO 2 + 0,1 4G, 5G, 6H
6H + 0,2 ISO 2 + 0,2 4G, 5G, 6H
30° 47°/30' 55° 60° 80° 90°
7,727 4,966 4,331 4,000 3,111 2,828
P (Gg/1") mm100 0,254 000
96 0,264 58380 0,317 50072 0,352 77864 0,396 87560 0,423 33356 0,453 57148 0,529 16744 0,577 27340 0,635 00036 0,705 55532 0,793 75028 0,907 14327 0,940 74126 0,976 92325 1,016 000
P (Gg/1") mm24 1,058 33322 1,154 54520 1,270 00019 1,336 84218 1,411 11116 1,587 50014 1,814 28613 1,953 84612 2,116 66711.1/2 2,208 69611 2,309 09110 2,540 0009 2,822 2228 3,175 0007 3,628 5716 4,233 333
P (Gg/1") mm5 5,080 0004.1/2 5,644 4444 6,350 0003.1/2 7.257 1433.1/4 7,815 3853 8,466 6672.7/8 8,834 7832.3/4 9,236 3642.5/8 9,676 1902.1/2 10,160 0002.1/4 11,288 8892 12,700 000
Tolerance of the tapClasse di tolleranza del maschio
Tolerance of the nut threadUtilizzabile nel campo di tolleranza per la filettatura del dado
Explanationcommento
Designation accordingDefinizione a tenore di
DIN 802 DIN
DIN EN 22857ISO 2857
undersize / Fine
standard / Normale
oversize (M12x1,5 7G = ISO2/6H + 0,03 mm)tolleranza maggiorata (p.es. a M 12x1,5-6G = ca. + 0,03 mm, riferito a ISO 2/6H)
oversize (M12x1,5 7G = ISO2/6H + 0,06 mm)tolleranza maggiorata (p.es. a M 12x1,5-7G = ca. + 0,06 mm riferito a ISO 2/6H)
manufacturer tolerance for special materials(X = small oversize, 4HX ≈ ISO2/6H)Classe di tolleranza speciale per materiale speciale (X = minor tolleranza maggiorata 4 HX corrisponde ≈ ISO 2/6H)
manufacturer tolerance for special materials(X = small oversize, 6HX ≈ ISO3/6G)Classe di tolleranza speciale per materiale speciale (X = minor tolleranza maggiorata 6HX corrisponde ≈ ISO 3/6G)
manufacturer tolerance for special materials(X = small oversize, 6GX ≈ 7G)Classe di tolleranza speciale per materiale speciale (X = minor tolleranza maggiorata 6GX corrisponde ≈ 7G)
+ 0,1 mm oversize for galvanic coatings and surface finishing with thickness of Layer up to 25 µmtolleranza maggiorata 0,1 mm, per strato di protezione galvanica e superficie raffinato con spessore fino 25 ųm
+ 0,2 mm oversize for galvanic coatings and surface finishing with thickness of Layer up to 50 µmtolleranza maggiorata 0,2 mm, per strato di protezione galvanica e superficie raffinato con spessore fino 25 ųm
The required oversize of the tap with galvanic coatings depends on the thread angle.The oversize O can be calculated with the following approach formula: O = S x FS = thickness of the layer / F = factor depending on the thread angle a (F = 2 / sin a / 2)tolleranza maggiorata necessaria da strato di protezione galvanica e dipendente dall’angolo del profilotolleranza maggiorata O può essere calcolata con la seguente formula: O = S x FS = spessore dell rivestimento galvanico / F = fattore dipendente di angolo del profilo a (F = 2 / sin / 2)Thread angle /Angolo del profiloF=
Conversion table - pitch per inch into mmTabella di conversione - Paso pollice in mm
235
Rockwell Vickers BrinellN/mm² HRC HRA HRB HRF HV (>98N) HB 30255 - - - - 80 76285 - - 48 83 90 86320 - - 56 87 100 95350 - - 62 91 110 105385 - - 67 94 120 114415 - - 71 96 130 124450 - - 75 99 140 133480 - - 79 101 150 143510 - - 82 104 160 152545 - - 85 106 170 162575 - - 87 107 180 171610 - - 90 109 190 181640 - - 92 110 200 190675 - - 94 111 210 199705 - - 95 112 220 209740 - - 97 113 230 219770 20 61 98 114 240 228800 22 62 100 115 250 238835 24 62 101 - 260 247865 26 63 102 - 270 257900 27 64 104 - 280 266930 29 65 105 - 290 276965 30 65 - - 300 285
1030 32 66 - - 320 3041095 34 68 - - 340 3231155 37 69 - - 360 3421220 39 70 - - 380 3611290 41 71 - - 400 3801350 43 72 - - 420 3991420 45 73 - - 440 4181485 46 74 - - 460 4371555 48 75 - - 480 4561595 48 75 - - 490 4661665 50 76 - - 510 4851740 51 76 - - 530 5041810 52 77 - - 550 5231880 54 78 - - 570 5421955 55 78 - - 590 5612030 56 79 - - 610 5802105 57 80 - - 630 5992180 58 80 - - 650 618
- 59 81 - - 670 636- 60 81 - - 690 -- 61 82 - - 720 -- 63 83 - - 760 -- 64 83 - - 800 -- 65 84 - - 840 -- 66 85 - - 880 -
CONVERSION TABLE OF TENSILE STRENGTH AND HARDNESS*TABELLA CONVERSIONE RESISTENZA E DUREZZA*
*no liability assumed *senza garanzia
236
46
89
1012
1518
2125
2730
36
1,6
1/16
800
1194
1592
1791
1988
2386
2983
3579
4176
4971
5369
5965
7158
1,8
708
1065
1415
1598
1768
2121
2652
3182
3712
4419
4743
5303
6364
263
795
512
7414
3315
9119
0923
8628
6333
4139
7742
9547
7357
272,
23/
3257
986
911
5813
0314
4617
3621
6926
0330
3736
1639
0543
3952
072,
551
076
410
1911
4712
7415
2719
0922
9126
7331
8234
3638
1845
823
1/8
425
637
849
955
1061
1273
1591
1909
2227
2651
2864
3182
3818
3,5
364
546
728
819
909
1091
1364
1636
1909
2273
2455
2727
3273
45/
3231
847
863
771
879
695
511
9314
3216
7119
8921
4823
8728
644,
528
342
556
663
770
784
910
6112
7314
8517
6819
0921
2225
465
3/16
255
382
510
573
637
764
955
1146
1337
1591
1719
1909
2292
61/
421
231
942
547
753
063
679
595
411
1313
2614
3215
9219
097
9/32
182
273
364
409
455
546
682
818
955
1136
1227
1364
1636
85/
1615
923
931
935
839
847
759
771
683
599
410
7411
9314
329
142
212
283
318
354
425
531
637
742
885
955
1061
1293
103/
812
719
125
528
631
838
247
757
366
879
585
995
511
4611
116
174
232
260
289
347
434
521
608
723
781
868
1041
121/
210
615
921
223
826
531
839
847
755
766
371
679
695
513
9814
719
622
024
529
436
744
151
461
266
173
488
114
9/16
9113
618
220
527
727
334
140
947
756
861
468
281
816
5/8
8011
915
917
919
923
929
835
841
849
753
759
771
618
7110
614
115
917
721
226
531
837
144
247
753
063
620
3/4
6496
127
143
159
191
239
286
334
398
430
477
573
227/
858
8711
613
014
517
421
726
030
436
239
143
452
124
1"53
8010
611
913
315
919
923
927
533
135
339
847
727
4771
9410
611
814
117
721
224
529
531
835
442
430
1-1/
843
6485
9510
612
715
919
122
326
528
631
838
233
1-1/
439
5877
8796
116
145
174
203
241
260
289
347
3635
5371
8088
106
133
159
186
221
239
265
318
391-
1/2
3349
6573
8298
122
147
171
204
220
245
294
4230
4661
6876
9111
413
615
918
920
522
727
345
1-3/
428
4257
6471
8510
612
714
917
719
121
225
548
2740
5360
6680
9911
913
916
617
919
923
952
2437
4955
6173
9211
012
915
316
518
422
056
2"23
3446
5157
6885
102
119
142
153
170
205
CO
NV
ER
SIO
N T
AB
LE O
F C
UTT
ING
SP
EE
D M
/MIN
. TO
R/M
IN.
TRA
DU
ZIO
NE
DE
LLA
VE
LOC
ITÀ
DI M
/MIN
IN U
/MIN
m/m
in.
Siz
eR
evol
utio
ns p
er M
inut
e (r
pm)
mm
inch
giri
al m
inut
o U
/min
237
S/E 10-20
S/E 6-15
S 4- 8
S 4- 8
S 4- 8
S 2- 5
S 2- 5
S 5-10
S 5-10
P/T 6-20
P/T 6-20
E 6-12
E 20-30
S/E 10-15
S/E 6-15
S/E 6-15
S/E 10-15
S/E 15-30
E 10-20
S/E 10-15
E/T 10-20
S 3- 4
S 3- 4
E/T 5-15
T 5-15
S = cutting oil /olii da taglio E = oil emulsion/emulsione P = kerosene/petrolio T = dry/secco
RECOMMENDED CUTTING SPEED COOLANTS AND LUBRICANTSVELOCITÀ DI TAGLIO RACCOMANDATOREFRIGERANTE E LUBRIFICAZIONE PER FILETTARE
Material/Materiali Lubricant
lubrificante
Cutting Speed
velocità di tagliom/min.
Steel, unalloyed and low alloyed, short-chippingAcciaio non legati e e baso legati, truciolo corto
non abrasive Material, short-chippingMateriali buona truciodibilità, truciolo corto
Steel, heat resistant, long-chippingAcciaio resistenti al calore, truciolo lungo
Steel, heat resistant, short-chippingAcciaio resistenti al calore, truciolo corto
Steel, cementation and heat treatable, short-chippingAcciaio da cementazione, Acciaio bonificato, truciolo corto
Steel, Tool Steel up to 1200 N/mm²Acciaio, Acciaio utensili a 1.200 N/mm²
Steel, Tool Steel over 1200 N/mm²Acciaio, Acciaio utensili da 1.200 N/mm²
Steel stainless, short-chippingAcciaio inossidabile, truciolo corto
Steel stainless, long-chippingAcciaio inossidabile, truciolo lungo
Iron, CastGhisa grigia
Iron, spheroidal graphiteGhisa sferoidale
Iron, Malleable CastGhisa malleabile
Brass, short-chippingOttone, truciolo corto
Brass, long-chippingOttone, truciolo lungo
Bronze, short-chippingBronzo, truciolo corto
Bronze, long-chippingBronzo, truciolo lungo
CopperRame
Aluminium-alloys, short-chippingAlluminio, truciolo corto
Aluminium-alloys, long-chippingAlluminio, truciolo lungo
Zinc AlloysLeghe forgiate
Magnesium AlloysLeghe di magnesio
Titanium, short-chippingTitanio, truciolo corto
Titanium, long-chippingTitanio, truciolo lungo
Plastics, thermoplasticsMateriali plastici, materiali termoplastici
Plastics, thermosettingMateriali plastici, materiali termodurenti
238
G 1/8" 28 9,728
G 1/4" 19 13,157
G 3/8" 19 16,662
G 1/2" 14 20,955
G 5/8" 14 22,911
G 3/4 14 26,441
G 7/8" 14 30,201
G 1" 11 33,249
G 1 1/8 11 37,897
G 1 1/4" 11 41,910
G 1 3/8" 11 44,323
G 1 1/2" 11 47,803
G 1 3/4" 11 53,746
G 2" 11 59,614
G 2 1/4" 11 65,710
G 2 1/2" 11 75,184
G 2 3/4" 11 81,534
G 3" 11 87,884
G 3 1/4" 11 93,980
G 3 1/2 11 100,330
G 3 3/4" 11 106,680
G 4" 11 113,030
PG 7 20 12,500
PG 9 18 15,200
PG 11 18 18,600
PG 13,5 18 20,400
PG 16 18 22,500
PH 21 16 28,300
PG 29 16 37,000
PG 36 16 47,000
PG 42 16 54,000
PG 48 16 59,500
No. 0 - - - 80 - 1,520
No. 1 - - 64 72 - 1,850
No. 2 - - 56 64 - 2,180
No. 3 - - 48 56 - 2,520
No. 4 - - 40 48 - 2,850
No. 5 - - 40 44 - 3,180
No. 6 - - 32 40 - 3,510
No. 8 - - 32 36 - 4,170
No. 10 - - 24 32 - 4,830
No. 12 - - 24 28 32 5,490
1/16" 60 - - - - 1,587
3/32" 48 - - - - 2,381
1/8" 40 - - - - 3,175
5/32" 32 - - - - 3,969
3/16 24 32 - - - 4,762
7,32" 24 28 - - - 5,556
1/4" 20 26 20 28 32 6,350
5/16" 18 22 18 24 32 7,938
3/8" 16 20 16 24 32 9,525
7/16" 14 18 14 20 28 11,113
1/2" 12 16 13 20 28 12,700
9/16" 12 16 12 18 24 14,288
5/8" 11 14 11 18 24 15,876
11/16" - 14 - - 24 17,463
3/4" 10 12 10 16 20 19,051
13/16" - 12 - - 20 20,638
7/8" 9 11 9 14 20 22,226
15/16" - 11 - - 20 23,813
1" 8 10 8 12 20 25,401
1 1/16" - - - - 18 26,988
1 1/8" 7 9 7 12 18 28,576
1 3/16" - - - - 18 30,163
1 1/4" 7 9 7 12 18 31,751
1 5/16" . . . . 18 33,338
1 3/8" 6 8 6 12 18 34,926
1 7/16" - - - - 18 36,512
1 1/2" 6 8 6 12 18 38,101
1 5/8" 5 8 5 - 18 41,277
1 3/4" 5 7 5 - 18 44,452
1 7/8" 4,5 - 4,5 - 18 47,627
2" 4,5 7 4,5 - 18 50,802
2 1/4" 4 - 4,5 - - 57,152
2 1/2" 4 - 4 - - 63,502
2 3/4" 3,5 - 4 - - 69,853
3" 3,5 - 4 - - 76,203
CONVERSION TABLE INCH-MMTABELLA DI CONVERSIONE POLLICE – MM
Nominal-ØInch
BSWPitchInch
BSFPitchInch
UNCPitchInch
UNFPitchInch
UNEFPitchInch
Thread-Ømm
armoured tube thread PG
Nominal-ØInch
BSP (G)PitchInch
Thread-Ømm
Nominal-Ø PitchInch
Thread-Ømm
239
M Ømm
M 1 0,25 0,97M 1,1 0,25 1,07M 1,2 0,25 1,17M 1,4 0,3 1,36M 1,6 0,35 1,54M (1,7) 0,35 1,64M 1,8 0,35 1,74M 2 0,4 1,93M 2,2 0,45 2,13M (2,3) 0,4 2,23M 2,5 0,45 2,43M (2,6) 0,45 2,53M 3 0,5 2,92M 3 0,6 2,91M 3,5 0,6 3,41M 3,5 0,75 3,41M 4 0,7 3,91M 4 0,75 3,91M 4,5 0,75 4,41M 5 0,8 4,90M 5 0,9 4,89M 6 1 5,88M 7 1 6,88M 8 1,25 7,87M 9 1,25 8,87M 10 1,5 9,85M 11 1,5 10,85M 12 1,75 11,83M 14 2 13,82M 16 2 15,82M 18 2,5 17,79M 20 2,5 19,79M 22 2,5 21,79M 24 3 23,77M 27 3 26,77M 30 3,5 29,73M 33 3,5 32,73M 36 4 35,70M 39 4 38,70M 42 4,5 41,69M 45 4,5 44,69M 48 5 47,66M 52 5 51,66Mf Ø
mmM 3 x 0,35 2,94M 3,5 x 0,35 3,44M 4 x 0,35 3,94M 4 x 0,5 3,93M 5 x 0,5 4,93M 6 x 0,5 5,93M 6 x 0,75 5,90M 7 x 0,75 6,90M 8 x 0,5 7,93M 8 x 0,75 7,90M 8 x 1 7,83M 9 x 1 8,88M 10 x 0,5 9,93M 10 x 0,75 9,90M 10 x 1 9,88M 10 x 1,25 9,86M 11 x 1 10,88M 12 x 0,75 11,90M 12 x 1 11,88M 12 x 1,25 11,86M 12 x 1,5 11,85M 13 x 1 12,88M 13 x 1,5 12,85
Mf Ømm
M 13 x 1,75 12,83M 14 x 1 13,88M 14 x 1,25 13,86M 14 x 1,5 13,85M 15 x 1 14,88M 15 x 1,5 14,85M 15 x 2 14,82M 16 x 1 15,88M 16 x 1,5 15,85M 18 x 1 17,88M 18 x 1,5 17,85M 18 x 2 17,82M 20 x 1 19,88M 20 x 1,5 19,85M 20 x 2 19,82M 22 x 1 21,88M 22 x 1,5 21,85M 22 x 2 21,82M 24 x 1 23,88M 24 x 1,5 23,85M 24 x 2 23,82M 25 x 1 24,88M 25 x 1,5 24,85M 26 x 1 25,88M 26 x 1,5 25,85M 27 x 1 26,88M 27 x 1,5 26,85M 27 x 2 26,82M 28 x 1,5 27,85M 28 x 2 27,82M 30 x 1 29,88M 30 x 1,5 29,85M 30 x 2 29,82M 32 x 1,5 31,85M 33 x 1,5 32,85M 33 x 2 32,82M 34 x 1,5 33,85M 35 x 1,5 34,85M 36 x 1,5 35,85M 36 x 2 35,82M 36 x 3 35,76M 38 x 1,5 37,85M 39 x 1,5 38,85M 39 x 2 38,82M 39 x 3 38,76M 40 x 1,5 39,85M 40 x 2 39,82M 40 x 3 39,76M 42 x 1,5 41,85M 42 x 2 41,82M 42 x 3 41,76M 45 x 1,5 44,85M 45 x 2 44,82M 45 x 3 44,76M 48 x 1,5 47,85M 48 x 2 47,82M 48 x 3 47,46M 50 x 1,5 49,85M 50 x 2 49,82M 50 x 3 49,76M 52 x 1,5 51,85M 52 x 2 51,82M 52 x 3 51,76
BSW Ømm
W 1/4 6,16W 5/16 7,76W 3/8 9,30W 7/16 10,89W 1/2 12,43W 9/16 13,92W 5/8 15,62W 3/4 18,76W 7/8 21,89W 1" 25,08W 1.1/8 28,21BSF Ø
mmBSF 3/16 4,67BSF 1/4 6,25BSF 5/16 7,82BSF 3/8 9,39BSF 7/16 10,97BSF 1/2 12,54BSF 9/16 14,12BSF 5/8 15,71BSF 3/4 18,85BSF 7/8 22,02BSF 1" 25,17UNC Ø
mmNo. 1-64 1,79No. 2-56 2,12No. 3-48 2,44No. 4-40 2,76No. 5-40 3,09No. 6-32 3,41No. 8-32 4,07No. 10-24 4,71No. 12-24 5,37 1/4-20 6,22 5/16-18 7,80 3/8-16 9,37 7/16-14 10,95 1/2-13 12,52 9/16-12 14,10 5/8-11 15,68 3/4-10 18,84 7/8- 9 22 1"- 8 25,16 1.1/8- 7 28,31 1.1/4- 7 31,49 1.3/8- 6 34,63 1.1/2- 6 37,81 1.3/4- 5 44,12 2"- 4,5 50,45 2.1/4- 4,5 56,80 2.1/2- 4 63,10 2.3/4- 4 69,45 3"- 4 75,80
UNF Ømm
No. 0-80 1,47No. 1-72 1,79No. 2-64 2,12No. 3-56 2,44No. 4-48 2,77No. 5-44 3,10No. 6-40 3,42No. 8-36 4,08No. 10-32 4,73No. 12-28 5,38 1/4-28 6,24 5/16-24 7,82 3/8-24 9,41 7/16-20 10,98 1/2-20 12,56 9/16-18 14,14 5/8-18 15,73 3/4-16 18,89 7/8-14 22,05 1"-12 25,21 1.1/8-12 28,38 1.1/4-12 31,56 1.3/8-12 34,73 1.1/2-12 37,91BSPG
Ømm
G 1/8 9,62G 1/4 13,03G 3/8 16,53G 1/2 20,81G 5/8 22,77G 3/4 26,30G 7/8 30,06G 1" 33,07G 1.1/8 37,71G 1.1/4 41,73G 1.3/8 44,14G 1.1/2 47,62G 1.3/4 53,56G 2" 59,43PG Ø
mmPG 7 12,40PG 9 15,10PG 11 18,50PG 13,5 20,30PG 16 22,40PG 21 28,15PG 29 36,85PG 36 46,85PG 42 53,85PG 48 59,15NPT Ø
mm1/16 8,171/8 10,551/4 14,103/8 17,521/2 21,853/4 27,161" 34,16
1.1/4 42,741.1/2 48,87
2" 60,95
FG Ømm
FG 2 x 56 2,03FG 2,3 x 56 2,23FG 2,6 x 56 2,53FG 6,35 x 26 6,23FG 7,9 x 26 7,81FG 9,5 x 26 9,40FG 14,3 x 20 14,14FG 14,3 x 20-LH 14,14FG 25,4 x 24 25,26BSC Ø
mmBSC 1/4 x 26 6,23BSC 5/16 x 26 7,81BSC 3/8 x 26 9,40BSC 9/16 x 20 14,14BSC 9/16 x 20LH 14,14BSC 1" x 24 25,26Vg Ø
mmVg 5 x 36 5,05Vg 5,2 x 24 5,12Vg 6 x 32 5,87Vg 8 x 32 7,57Vg 10 x 28 10,16Vg 12 x 26 12,04
RECOMMENDED OUTSIDE DIAMETERDIAMETRI DEI PERNI DA FILLETTARE RACCOMANDATO
240
M Ømm
M 1 0,25 0,75M 1,1 0,25 0,85M 1,2 0,25 0,95M 1,4 0,3 1,1M 1,6 0,35 1,25M (1,7) 0,35 1,3M 1,8 0,35 1,45M 2 0,4 1,6M 2,2 0,45 1,75M (2,3) 0,4 1,9M 2,5 0,45 2,05M (2,6) 0,45 2,1M 3 0,5 2,5M 3,5 0,6 2,9M 4 0,7 3,3M 4,5 0,75 3,7M 5 0,8 4,2M 6 1 5M 7 1 6M 8 1,25 6,8M 9 1,25 7,8 M 10 1,5 8,5M 11 1,5 9,5M 12 1,75 10,2M 14 2 12M 16 2 14M 18 2,5 15,5M 20 2,5 17,5M 22 2,5 19,5M 24 3 21M 27 3 24M 30 3,5 26,5M 33 3,5 29,5M 36 4 32M 39 4 35M 42 4,5 37,5M 45 4,5 40,5M 48 5 43M 52 5 47M 3 0,6 2,4M 3,5 0,75 2,75M 4 0,75 3,25M 5 0,9 4,1Mf Ø
mmM 2,5 x 0,35 2,15M 2,6 x 0,35 2,25M 3 x 0.35 2,65M 3,5 x 0,35 3,15M 4 x 0,35 3,65M 4 x 0,5 3,5M 4,5 x 0,5 4M 5 x 0,5 4,5M 5 x 0,75 4,25M 5,5 x 0,5 5M 6 x 0,5 5,5M 6 x 0,75 5,2M 7 x 0,5 6,5M 7 x 0,75 6,2M 8 x 0,5 7,5M 8 x 0,75 7,2M 8 x 1,0 7M 9 x 0,5 8,5M 9 x 0,75 8,2M 9 x 1,0 8M 10 x 0,5 9,5M 10 x 0,75 9,2M 10 x 1,0 9
Mf Ømm
M 10 x 1,25 8,8M 11 x 1,0 10M 11 x 1,25 9,8M 12 x 0,75 11,2M 12 x 1,0 11M 12 x 0,5 11,5M 12 x 1,25 10,8M 13 x 0,5 12,5M 12 x 1,5 10,5M 13 x 0,75 12,25M 13 x 1,0 12M 13 x 1,5 11,5M 14 x 0,75 13,25M 14 x 1,0 13M 14 x 1,25 12,8M 14 x 0,5 13,5M 14 x 1,5 12,5M 15 x 0,75 14,25M 15 x 1,0 14M 15 x 1,5 13,5M 16 x 0,5 15,5M 16 x 1,0 15M 16 x 0,75 15,25M 16 x 1,25 14,75M 16 x 1,5 14,5M 18 x 0,5 17,5M 17 x 1,0 16M 18 x 1,0 17M 18 x 1,25 16,75M 18 x 1,5 16,5M 18 x 0,75 17,25M 18 x 2,0 16M 19 x 1,0 18M 19 x 1,5 17,5M 20 x 0,5 19,5M 20 x 1,0 19M 20 x 0,75 19,25M 20 x 1,25 18,75M 20 x 1,5 18,5M 20 x 2,0 18M 21 x 1,0 20M 21 x 1,5 19,5M 22 x 0,5 21,5M 22 x 1,0 21M 22 x 0,75 21,25M 22 x 1,25 20,75M 22 x 1,5 20,5M 22 x 2,0 20M 23 x 1,0 22M 23 x 1,5 21,5M 24 x 1,0 23M 24 x 0,5 23,5M 24 x 1,25 22,75M 24 x 0,75 23,25M 24 x 1,5 22,5M 24 x 2,0 22M 25 x 1,0 24M 25 x 1,5 23,5M 26 x 1,0 25M 26 x 1,5 24,5M 26 x 2,0 24M 27 x 1,0 26M 27 x 1,5 25,5M 27 x 2,0 25M 28 x 1,0 27M 28 x 1,5 26,5M 28 x 2,0 26M 29 x 1,5 27,5
Mf Ømm
M 30 x 1,0 29M 30 x 1,5 28,5M 30 x 2,0 28M 30 x 2,5 27,5M 30 x 3,0 27M 32 x 2 30M 32 x 1,5 29,5M 32 x 3,0 29M 33 x 1,5 31,5M 32 x 1 31M 33 x 2,0 31M 33 x 3,0 30M 34 x 1 33M 34 x 1,5 32,5M 34 x 2,0 32M 35 x 1 34M 35 x 1,5 33,5M 35 x 2 33M 36 x 1,5 34,5M 36 x 1 35M 36 x 2,0 34M 37 x 1,5 35,5M 36 x 3,0 33M 38 x 1 37M 38 x 1,5 36,5M 38 x 2,0 36M 39 x 1,5 37,5M 38 x 3 35M 39 x 2,0 37M 39 x 3,0 36M 40 x 1 39M 40 x 1,5 38,5M 40 x 2,0 38M 40 x 3,0 37M 42 x 1 41M 42 x 1,5 40,5M 44 x 1,5 42,5M 42 x 2,0 40M 44 x 2 42M 42 x 3,0 39M 45 x 1 44M 45 x 1,5 43,5M 45 x 2,0 43M 45 x 3,0 42M 46 x 1,5 44,5M 48 x 1,5 46,5M 48 x 1 47M 48 x 2,0 46M 48 x 3,0 45M 50 x 1,5 48,5M 50 x 2,0 48M 50 x 3,0 47M 52 x 1,5 50,5M 52 x 2,0 50M 52 x 3,0 49M 54 x 1,0 53M 54 x 1,5 52,5M 54 x 2,0 52M 54 x 3,0 51M 54 x 4,0 50M 55 x 1,5 53,5M 55 x 2,0 53M 55 x 3,0 52M 55 x 4,0 51M 56 x 1,0 55M 56 x 1,5 54,5M 56 x 2,0 54M 56 x 3,0 53
Mf Ømm
M 56 x 4,0 52M 58 x 1,0 57M 58 x 1,5 56,5M 58 x 2,0 56M 58 x 3,0 55M 58 x 4,0 54M 60 x 1,5 58,5M 60 x 2,0 58M 60 x 3,0 57M 60 x 4,0 56M 62 x 1,5 60,5M 62 x 2,0 60M 62 x 3,0 59M 62 x 4,0 58M 63 x 1,5 61,5M 64 x 1,5 62,5M 64 x 2,0 62M 64 x 3,0 61M 64 x 4,0 60M 65 x 1,5 63,5M 65 x 2,0 63M 65 x 3,0 62M 65 x 4,0 61M 68 x 1,5 66,5M 68 x 2,0 66M 68 x 3,0 65M 68 x 4,0 64M 70 x 1,5 68,5M 70 x 2,0 68M 70 x 3,0 67M 70 x 4,0 66M 72 x 1,5 70,5M 72 x 2,0 70M 72 x 3,0 69M 72 x 4,0 68M 74 x 1,5 72,5M 74 x 2,0 72M 74 x 3,0 71M 74 x 4,0 70M 75 x 1,5 73,5M 75 x 2,0 73M 75 x 3,0 72M 75 x 4,0 71M 76 x 1,5 74,5M 76 x 2,0 74M 76 x 3,0 73M 76 x 4,0 72M 78 x 1,5 76,5M 78 x 2,0 76M 78 x 3,0 75M 78 x 4,0 74M 80 x 1,5 78,5M 80 x 2,0 78M 80 x 3,0 77M 80 x 4,0 76M 82 x 1,5 80,5M 82 x 2,0 80M 82 x 3,0 79M 82 x 4,0 78M 84 x 1,5 82,5M 84 x 2,0 82M 84 x 3,0 81M 84 x 4,0 80M 85 x 1,5 83,5M 85 x 2,0 83M 85 x 3,0 82M 85 x 4,0 81M 86 x 1,5 84,5
Mf Ømm
M 86 x 2,0 84M 86 x 3,0 83M 86 x 4,0 82M 88 x 1,5 86,5M 88 x 2,0 86M 88 x 3,0 85M 88 x 4,0 84M 90 x 1,5 88,5M 90 x 2,0 88M 90 x 3,0 87M 90 x 4,0 86M 92 x 1,5 90,5M 92 x 2,0 90M 92 x 3,0 89M 92 x 4,0 88M 95 x 1,5 93,5M 95 x 2,0 93M 95 x 3,0 92M 95 x 4,0 91M 96 x 1,5 94,5M 96 x 2,0 94M 96 x 3,0 93M 96 x 4,0 92M 98 x 1,5 96,5M 98 x 2,0 96M 98 x 3,0 95M 98 x 4,0 94M 100 x 1,5 98,5M 100 x 2,0 98M 100 x 3,0 97M 100 x 4,0 96M 105 x 1,5 103,5M 105 x 2,0 103M 105 x 3,0 102M 105 x 4,0 101M 110 x 1,5 108,5M 110 x 2,0 108M 110 x 3,0 107M 110 x 4,0 106BSW Ø
mmW 3/32 1,8W 1/8 2,6W 5/32 3,1W 3/16 3,6W 7/32 4,4W 1/4 5,1W 5/16 6,5W 3/8 7,9W 7/16 9,3W 1/2 10,5W 9/16 12W 5/8 13,5W 3/4 16,5W 7/8 19,25W 1" 22W 1.1/8 24,75W 1.1/4 27,75W 1.3/8 30,2W 1.1/2 33,5W 1.3/4 38,5W 2" 44,5
RECOMMENDED TAPPING DRILL SIZESPREFORI PER MASCHI RACCOMANDATO
241
BSF Ømm
BSF 1/4 5,2BSF 5/16 6,6BSF 3/8 8,1BSF 7/16 9,5BSF 1/2 11BSF 5/8 14BSF 3/4 16,5BSF 7/8 19,5BSF 1" 22,5
UNC Ømm
2"- 4,5 452.1/4- 4,5 51,52.1/2- 4 57,252.3/4- 4 63,5
3"- 4 703.1/4- 4 76,23.1/2- 4 82,6
UNC Ømm
No. 1-64 1,5No. 2-56 1,8No. 3-48 2,1No. 4-40 2,3No. 5-40 2,6No. 6-32 2,85No. 8-32 3,5No. 10-24 3,9No. 12-24 4,5
1/4-20 5,25/16-18 6,65/16-18 6,63/8-16 8
7/16-14 9,41/2-13 10,8
9/16-12 12,25/8-11 13,53/4-10 16,57/8- 9 19,51"- 8 22,25
1.1/8- 7 251.1/4- 7 28,251.3/8- 6 30,751.1/2- 6 341.3/4- 5 39,5
2"- 4,5 452.1/4- 4,5 51,52.1/2- 4 57,25
UNF Ømm
No. 0-80 1,3No. 1-72 1,6No. 2-64 1,9No. 3-56 2,1No. 4-48 2,4No. 5-44 2,7No. 6-40 3No. 8-36 3,5No. 10-32 4,1No. 12-28 4,7 1/4-28 5,5 5/16-24 6,9 3/8-24 8,5 7/16-20 9,9 1/2-20 11,5 9/16-18 12,9 5/8-18 14,5 3/4-16 17,5 7/8-14 20,25 1"-12 23,25 1.1/8-12 26,5 1.1/4-12 29,5 1.3/8-12 32,5 1.1/2-12 3612-UN Ø
mmUN 1.5/8-12 39,2UN 1.3/4-12 42,4UN 1.7/8-12 45,6UN 2"-12 48,75UN 2.1/8-12 51,9UN 2.1/4-12 55,1UN 2.1/2-12 61,5UN 2.3/4-12 67,8UN 3"-12 74,2UN 3.1/4-12 80,5UN 3.1/2-12 86,9UN 3.3/4-12 93,2UN 4"-12 99,6
8-UN Ømm
UN 1.1/16-8 23,9UN 1.1/8-8 25,5UN 1.3/16-8 27,1UN 1.1/4-8 28,75UN 1.5/16-8 30,3UN 1.3/8-8 31,75UN 1.1/2-8 35UN 1.5/8-8 38UN 1.3/4-8 41,5UN 1.7/8-8 44,5UN 2"-8 47,75UN 2.1/8-8 50,9UN 2.1/4-8 54UN 2.1/2-8 60,4UN 2.3/4-8 66,7UN 3"-8 73,1UN 3.1/4-8 79,4UN 3.1/2-8 85,8UN 3.3/4-8 92,1UN 4"-8 98,5UN Ø
mmUN 5/16-28 7UN 3/8-20 8,3UN 3/8-28 8,6UN 7/16-32 10,3UN 1/2-32 11,9UN 9/16-20 10,9UN 9/16-28 11,3UN 9/16-32 11,4UN 5/8-20 14,6UN 5/8-28 15UN 11/16-20 16,2UN 11/16-16 15,9UN 1"-32 24,6UNEF Ø
mmNo. 12-32 4,75
1/4-32 5,65/16-32 7,2
3/8-32 8,87/16-28 10,25
1/2-28 11,89/16-24 13,3
5/8-24 14,911/16-24 16,5
3/4-20 17,7513/16-20 19,5
7/8-20 2115/16-20 22,5
1"-20 24,251.1/16-18 25,7
1.1/8-18 27,251.3/16-18 28,751.1/4-18 30,5
1.5/16-18 321.3/8-18 33,5
1.7/16-18 35,21.1/2-18 36,8
1.9/16-18 38,41.5/8-18 40
1.11/16-18 41,51.3/4-18 43
2"-18 49,4
UNS Ømm
UNS 1/4-24 5,4UNS 1/4-36 5,7UNS 1/4-40 5,75UNS 3/8-27 8,35UNS 7/16-24 10,1UNS 1/2-24 11,75UNS 5/8-27 14,7UNS 3/4-24 18UNS 7/8-18 21UNS 1"-14 23,75PG Ø
mmPG 7 11,4PG 9 14PG 11 17,25PG 13,5 19PG 16 21,25PG 21 26,75PG 29 35,5PG 36 45,5PG 42 52,5PG 48 58NPT Ø
mm1/16-27 6,3
1/8-27 8,51/4-18 11,23/8-18 14,51/2-14 183/4-14 231"-11,5 29
1.1/4-11,5 381.1/2-11,5 44
2"-11,5 562.1/2- 8 67
3- 8 83
Rd Ømm
Rd 8 x 1/10 6Rd 9 x 1/10 7Rd 10 x 1/10 8Rd 11 x 1/10 9Rd 12 x 1/10 10Rd 14 x 1/8 11,5Rd 16 x 1/8 13,5Rd 18 x 1/8 15,5Rd 20 x 1/8 17,5Rd 22 x 1/8 19,5Rd 24 x 1/8 21,5Rd 26 x 1/8 23,5Rd 28 x 1/8 25,5Rd 30 x 1/8 27,5Rd 32 x 1/8 29,5Rd 34 x 1/8 31,5Rd 36 x 1/8 33,5Rd 38 x 1/8 35,5Rd 40 x 1/6 36,6Rd 42 x 1/6 38,6Rd 44 x 1/6 40,6Tr Ø
mmTr 10 x 2 8,2Tr 10 x 3 7,5Tr 12 x 3 9,25Tr 14 x 3 11,25Tr 14 x 4 10,5Tr 16 x 4 12,25Tr 18 x 4 14,25Tr 20 x 4 16,25Tr 22 x 4 18,25Tr 22 x 5 17,25Tr 24 x 5 19,25Tr 26 x 5 21,25Tr 28 x 5 23,25Tr 30 x 6 24,25Tr 32 x 6 26,25Tr 36 x 6 30,25
FG Ømm
FG 2 x 56 1,7FG 2,3 x 56 1,9FG 2,6 x 56 2,2FG 6,35 x 26 5,5FG 7,9 x 26 7FG 9,5 x 26 8,6FG 14,3 x 20 13,1FG 14,3 x 20-LH 13,1FG 25,4 x 24 24,5BSC Ø
mmBSC 1/4 x 26 5,5BSC 5/16 x 26 7BSC 3/8 x 26 8,6BSC 9/16 x 20 13,1BSC 9/16 x 20 LH 13,1BSC 1" x 24 24,5
Vg Ømm
Vg 5 x 36 4,7Vg 5,2 x 24 4,3Vg 6 x 32 5,4Vg 8 x 32 6,9Vg 10 x 28 9,4Vg 12 x 26 11,2
WDIN 477
Ømm
W 19,8 15,1W 28,8 23,5W 31,3 26,0
BSPG
Ømm
G 1/8 8,8G 1/4 11,8G 3/8 15,25G 1/2 19G 5/8 21G 3/4 24,5G 7/8 28,25G 1" 30,75G 1.1/8 35,3G 1.1/4 39,5G 1.3/8 41,7G 1.1/2 45,25G 1.3/4 51,1G 2" 57G 2.1/4 63,1G 2.1/2 72,6G 2.3/4 78,9G 3" 85,3BA Ø
mmBA 0 5,1BA 1 4,5BA 2 4BA 3 3,4BA 4 3BA 5 2,65BA 6 2,3
RECOMMENDED TAPPING DRILL SIZESPREFORI PER MASCHI RACCOMANDATO
242
Art.-No.
100 10130 12140 12145 13146 13150 11152 11155 10180 220220 41221 195222 189223 26224 171225 195227 27228 171230 42231 196232 190233 29234 173235 199-200236 179240 42241 196-197242 190243 30244 174246 175250 43251 34252 191253 32254 176255 198256 202257 33258 178260 40261 193262 186-188263 20-21264 165-166265 21-23266 166-168267 193-194268 186-188270 39271 192272 185273 16274 162275 164276 18278 163279 163280 23-25281 17, 25, 168-169282 163, 169-170284 201300 134301 135315 80-81
Art.-No.
317 82, 83320 86-87325 88326 89, 91327 90334 119335 120337 121344 119345 120347 121348 122-124349 125-127351 142352 138, 149353 132, 147354 136, 148355 153-156356 153-156357 144359 139361 145362 140, 149363 133, 147364 137, 148365 143369 141370 73371 158373 78374 79375 77, 80376 84377 77, 82379 85383 78384 79385 77, 81386 84387 77, 83389 85394 92395 93-95397 96-98470 215476 215478 217-219479 217480 207-209, 220486 204-206489 226-228491 210-211492 212495 213-214553 38554 184563 37564 183565 37566 183573 35574 182577 36615 46
Art.-No.
617 46619 46623 50630 57633 51635 56637 53643 51653 52657 55663 49665 49670 63, 221-222671 72, 222, 225672 69-70, 221673 72, 222674 71, 223-225676 71677 64-66678 66-68700 73705 99707 100715 99717 100734 113-114745 101747 102755 101757 102765 103767 104775 103777 104782 128784 110785 111787 112791 159793 180-181794 115-118804 19805 47, 216807 48, 216809 47, 216831 105, 106832 109833 105, 106-108838 31890 172894 28954 54957 54970 177975 53977 53980 179985 56, 58987 56, 58994 59997 59
05.1
5.6,
0.D
.Pr.
THREADING SOLUTIONS
VÖLKEL GmbHMorsbachtalstraße 18D-42855 Remscheid
Postfach 15 01 28D-42828 Remscheid
Telefon +49 2191 490112Telefax +49 2191 490125
E-Mail: [email protected]: www.voelkel.com VD 2016
VD
201
6