Various needs on food production processes have shaped our … · PHONE +1-847-368-0539 FAX...
Transcript of Various needs on food production processes have shaped our … · PHONE +1-847-368-0539 FAX...
Equipment for food m
anufacturing processes FP series
CKD INDIA PRIVATE LTD.
TAIWAN CKD CORPORATION
CKD UK OFFICE
CKD EUROPE BRANCH
CKD CZECH OFFICE CKD SINGAPORE PTE. LTD.CKD CORPORATION BRANCH OFFICE
M-CKD PRECISION SDN.BHD.
CKD THAI CORPORATION LTD.
:Distributors
CKD USA CORPORATION
CKD KOREA CORPORATION
CKD(SHANGHAI) CORPORATION
PT CKD TRADING INDONESIA
CKD FRANKFURTOFFICE
CKD VIETNAM ENGINEERING CO.,LTD
CKD MEXICO, S. DE R.L. DE C.V.
●Specifications are subject to change without notice.
The goods and/or their replicas, or the technology and/or software found in this catalog are subject to complementary export regulations by Foreign Exchange and Foreign Trade Law of Japan. If the goods and/or their replicas, the technology and/or software found in this catalog are to be exported, law requires that the exporter makes sure that they will never be used for the development or manufacture of weapons for mass destruction.
2016.9CKD Corporation 2016 All copy rights reserved.
Website http://www.ckd.co.jp/
U.S.A.CKD USA CORPORATION●CHICAGO HEADQUARTERS
4080 Winnetka Avenue, Rolling Meadows, IL 60008, USAPHONE +1-847-368-0539 FAX +1-847-788-0575・CINCINNATI OFFICE・SAN ANTONIO OFFICE・SAN JOSE OFFICE・DETROIT OFFICE
MexicoCKD MEXICO, S. DE R.L. DE C.V.
Cerrada la Noria No. 200 Int. A-01, Querétaro Park II, Parque Industrial Querétaro, Santa Rosa Jáuregui, Querétaro, C.P. 76220, MéxicoPHONE +52-442-161-0624
EuropeCKD CORPORATION EUROPE BRANCH
De Fruittuinen 28 Hoofddorp, the NetherlandsPHONE +31-(0)23-5541490 FAX +31-(0)23-5541491・CZECH OFFICE・UK OFFICE・FRANKFURT OFFICE
MalaysiaM-CKD PRECISION SDN.BHD.●HEAD OFFICE
Lot No.6,Jalan Modal 23/2, Seksyen 23, Kawasan MIEL,Fasa 8, 40300 Shah Alam,Selangor Darul Ehsan, MalaysiaPHONE +60-(0)3-5541-1468 FAX +60-(0)3-5541-1533・JOHOR BAHRU BRANCH OFFICE・PENANG BRANCH OFFICE
ThailandCKD THAI CORPORATION LTD.●SALES HEADQUARTERS
Suwan Tower, 14/1 Soi Saladaeng 1, North Sathorn Road, Kwaeng Silom, Khet Bangrak, Bangkok 10500, ThailandPHONE +66-(0)2-267-6300 FAX +66-(0)2-267-6305・RAYONG OFFICE・NAVANAKORN OFFICE・EASTERN SEABOARD OFFICE・LAMPHUN OFFICE・KORAT OFFICE・AMATANAKORN OFFICE・PRACHINBURI OFFICE・SARABURI OFFICE
SingaporeCKD SINGAPORE PTE. LTD.
No.33 Tannery Lane #04-01 Hoesteel Industr ial Building, Singapore 347789, Singapore PHONE +65-67442623 FAX +65-67442486CKD CORPORATION BRANCH OFFICE
No.33 Tannery Lane #04-01 Hoesteel Industr ial Building, Singapore 347789, Singapore PHONE +65-67447260 FAX +65-68421022・INDIA LIAISON OFFICE BANGALORE・INDIA LIAISON OFFICE DELHI
IndiaCKD INDIA PRIVATE LTD.
Unit No. 607, 6th Floor, Welldone Tech Park, Sector 48, Sohna Road, Gurgaon-122018, Haryana, IndiaPHONE +91-(0)124-418-8212
IndonesiaPT CKD TRADING INDONESIA
Wisma Keiai, 17th Floor, Jl. JendralSudirman Kav.3, Jakarta 10220, IndonesiaPHONE +62-(0)21-572-3220 FAX +62-(0)21-573-4112
VietnamCKD VIETNAM ENGINEERING CO.,LTD.
18th Floor, CMC Tower, Duy Tan Street, Cau Giay District, Hanoi, Vietnam PHONE +84-4-37957631 FAX +84-4-37957637
Taiwan台湾喜開理股 有限公司TAIWAN CKD CORPORATION
16F-3, No. 7, Sec. 3, New Taipei Blvd., Xinzhuang Dist., New Taipei City 242, TaiwanPHONE +886-(0)2-8522-8198 FAX +886-(0)2-8522-8128・新竹営業所(HSINCHU OFFICE)・台中営業所(TAICHUNG OFFICE)・台南営業所(TAINAN OFFICE)
China喜開理(上海)機器有限公司CKD(SHANGHAI)CORPORATION●営業部 /上海浦西事務所(SALES HEADQUARTERS / SHANGHAI PUXI OFFICE)
Room 601, 6th Floor, Yuanzhongkeyan Building, No. 1905 Hongmei Road, Xinhui District, Shanghai 200233, ChinaPHONE +86-(0)21-61911888 FAX +86-(0)21-60905356・上海浦東事務所(SHANGHAI PUDONG OFFICE)・無錫事務所(WUXI OFFICE)・杭州事務所(HANGZHOU OFFICE)・寧波事務所(NINGBO OFFICE)・南京事務所(NANJING OFFICE)・蘇州事務所(SUZHOU OFFICE)・昆山事務所(KUNSHAN OFFICE)・北京事務所(BEIJING OFFICE)・天津事務所(TIANJIN OFFICE)・長春事務所(CHANGCHUN OFFICE)・大連事務所(DALIAN OFFICE)・青島事務所(QINGDAO OFFICE)・済南事務所(JINAN OFFICE)・烟台事務所(YANTAI OFFICE)・瀋陽事務所(SHENYANG OFFICE)・重慶事務所(CHONGQING OFFICE)・成都事務所(CHENGDU OFFICE)・西安事務所(XIAN OFFICE)・武漢事務所(WUHAN OFFICE)・鄭州事務所(ZHENGZHOU OFFICE)・長沙事務所(CHANGSHA OFFICE)・広州事務所(GUANGZHOU OFFICE)・深圳西事務所(WEST SHENZHEN OFFICE)・深圳東事務所(EAST SHENZHEN OFFICE)・東莞事務所(DONGGUAN OFFICE)・厦門事務所(XIAMEN OFFICE)
KoreaCKD KOREA CORPORATION●HEADQUARTERS(3rd Floor), 44, Sinsu-ro, Mapo-gu, Seoul 121-856, KoreaPHONE +82-(0)2-783-5201~5203 FAX +82-(0)2-783-5204・水原営業所(SUWON OFFICE)・天安営業所(CHEONAN OFFICE)・蔚山営業所(ULSAN OFFICE)
□ 2-250 Ouji Komaki, Aichi 485-8551, Japan□ PHONE +81-(0)568-74-1338 FAX +81-(0)568-77-3461 Equipment for
Food manufacturing processes FP series
Equipment for Food manufacturing processes
FP series
Various needs on food production processes have shaped our products.
1CC-1271A
MaterialMaterial
MaterialMaterial
Equipment for food manufacturing processes FP seriesEquipment for food manufacturing processes FP series
A wide range of offerings from air filters to actuators which can be used safely and securely in food manufacturing processes are available as standard
We provide total support for your food manufacturing processes with our comprehensive engineering capability in packaging, pneumatics, fluid control and motors
Easy to search
Easy to select
Easy to useContributes to
FSSC 22000
certification!
FP1 Series
FP2 Series
FP3 Series
Eliminates concerns of contamination due to lubricant!
Safe materials too!
Further enhanced safety!
LubricantsLubricants
LubricantsLubricants
LubricantsLubricants
EnvironmentEnvironment
EnvironmentEnvironmentStructureStructure ShapeShape
CKD deliversSafe & Secure
Environment
Material
Structure
Shape
Lubricants
FP1 Series FP2 Series FP3 SeriesFood grade lubricant (NSF H1) is used for flow paths and sliding parts.
In addition to the features of FP1, materials conforming to the Food Sanitation Act (resin/rubber) are used for the flow path part.
In addition to the features of FP2, its lubricants, materials, shapes, etc. are even more suitable for food manufacturing processes.* Materials and dimensions are the same as
standard products.* Materials and dimensions (except for the flow
path part) are the same as standard products.
This logo represents CKD's stance to provide you with safe components for supporting your food manufacturing processes.
Cylinder
Cylinder valve
Filter/regulator
Solenoid valve
Diaphragm type cylinder valve
Rotary valve
* Notification No. 370 of Ministry of Health, Labour, and Welfare, Specifications and Standards for Food and Food Additives, etc., under Food Sanitation Act (1959)
Bacteria Removing filter
Sliding part
Sliding part
Sliding part
Flow path part
Sliding part
All parts electro-polished
Secondary side outlet buffed
Flow path part
Flow path part
Sliding part
Flow path part
Flow path part
LRV ≥ 8
MaterialMaterial
MaterialMaterial
Equipment for food manufacturing processes FP seriesEquipment for food manufacturing processes FP series
A wide range of offerings from air filters to actuators which can be used safely and securely in food manufacturing processes are available as standard
We provide total support for your food manufacturing processes with our comprehensive engineering capability in packaging, pneumatics, fluid control and motors
Easy to search
Easy to select
Easy to useContributes to
FSSC 22000
certification!
FP1 Series
FP2 Series
FP3 Series
Eliminates concerns of contamination due to lubricant!
Safe materials too!
Further enhanced safety!
LubricantsLubricants
LubricantsLubricants
LubricantsLubricants
EnvironmentEnvironment
EnvironmentEnvironmentStructureStructure ShapeShape
CKD deliversSafe & Secure
Environment
Material
Structure
Shape
Lubricants
FP1 Series FP2 Series FP3 SeriesFood grade lubricant (NSF H1) is used for flow paths and sliding parts.
In addition to the features of FP1, materials conforming to the Food Sanitation Act (resin/rubber) are used for the flow path part.
In addition to the features of FP2, its lubricants, materials, shapes, etc. are even more suitable for food manufacturing processes.* Materials and dimensions are the same as
standard products.* Materials and dimensions (except for the flow
path part) are the same as standard products.
This logo represents CKD's stance to provide you with safe components for supporting your food manufacturing processes.
Cylinder
Cylinder valve
Filter/regulator
Solenoid valve
Diaphragm type cylinder valve
Rotary valve
* Notification No. 370 of Ministry of Health, Labour, and Welfare, Specifications and Standards for Food and Food Additives, etc., under Food Sanitation Act (1959)
Bacteria Removing filter
Sliding part
Sliding part
Sliding part
Flow path part
Sliding part
All parts electro-polished
Secondary side outlet buffed
Flow path part
Flow path part
Sliding part
Flow path part
Flow path part
LRV ≥ 8
Equipment for food manufacturing processes FP series
Prevents food contamination caused by lubricant. Food grade lubricant (NSF H1) is used.
FP1SCPD3 Series
Pencil shaped cylinder
P1
FJ Series
Floating joint
P49
CKG Series
3-way jaw bearing chuck
P61 VSP Series
Suction pad
P203
HMF Series
Compact wide parallel hand
P57
4G Series
3/4/5-port pilot operated valve
P73
GW Series
Fittings
P171ZW Series
Fittings(stainless-steel)
P172
CMK2 Series
Medium bore size cylinder
P5CMK2J Series
Medium bore size cylinder (stainless steel)
P11SCM Series
Round shaped cylinder
P15SCG Series
Tie rod air cylinder
P21
SCA2 Series
Medium bore size cylinder, tie rod type
P25SCS2 Series
Large bore size cylinder
P31SSD2 Series
Compact cylinder
P35STG-M Series
Guided cylinder
P41
FPV Series
Block valve
P189
2QV/3QV Series
Quick valve
P191
VSH/VSC Series
Discrete type ejector
P193
APK Series
Pilot kick type 2-port solenoid valve
P195
FH100 Series
Feather hand (mini-parallel hand)
P51
CKL2 Series
Powerful chuck
P63
SU/SD Series
High polymer membrane dryer
P159
EVD Series
Digital electro-pneumatic regulator
P167
DSC Series
Speed controller with adjusting dial
P175
SCL2 Series
Speed controller, inline with push-in fitting
P177
DVL-S Series
Needle valve with adjusting dial
P181
SC-M5 Series
Miniature speed controller
P183
SC3W Series
Speed controller, elbow with push-in fitting
P173
SC1 Series
Speed controller
P184
CKLG2 Series
Powerful chuck
P65
BHA/BHG Series
Compact cross roller parallel hand
P53
FH500 Series
Feather hand (mini-fulcrum hand)
P59
W1*00-W8*00 Series
Filter/regulator
P139
SMW/SMW2 Series
Metering valve with silencer
P185
SRL3 Series
Rodless cylinder
P45AF Series
Medium main line filter
P201
F1000-F8000 Series
Air filter
P143
R1*00-R8*00 Series
Regulator
P149
CHB/CHG Series
Compact rotary valve
P229
MXB/MXG Series
Oil-free motor driven 2-port ball valve
P231
SPKSeries
Pilot kick type 2-port solenoid valve for steam
P235
MYB3Series
Metal free solenoid valve
P237
HB Series
High corrosion resistant direct acting 2-port solenoid valve
P238
P1100-P8100 Series
Reed switch type compact pressure switch
P153
V1000/V3000/V3010/V6010/Series
Shut-off valve P155
AG31/41/33/43/34/44Series
Direct acting 3-port solenoid valve (general purpose valve)
P217
M(X)1000-M(X)8000 Series
Oil mist filter
P145
SAB Series
Air operated 2-port valve
P197
NAP Series
Air operated 3-port valve
P199
EXA Series
Pilot operated 2-port solenoid valve for compressed air
P205
ADK11-Z Series
Pilot operated 2-port solenoid valve for dry air (general purpose valve)
P223
LAD Series
Diaphragm type cylinder valve
P225
NAD Series
Diaphragm type cylinder valve
P227
GNAD Series
Diaphragm type cylinder valve, manifold
P228
FWD Series
Compact pilot operated solenoid valve for water
P207
USB/G Series
Compact direct acting 2/3-port solenoid valve
P209
AB31/41 Series
Direct acting 2-port solenoid valve (general purpose valve)
P215
FP2Materials conforming to the Food Sanitation Act are used.
Standard model supports. ............................................................................. P239
Contact CKD for details. ................................................................................ P240
Related products ........................................................................................... P243
Equipment for food manufacturing processes FP series
Equipment for food manufacturing processes FP series
Prevents food contamination caused by lubricant. Food grade lubricant (NSF H1) is used.
FP1SCPD3 Series
Pencil shaped cylinder
P1
FJ Series
Floating joint
P49
CKG Series
3-way jaw bearing chuck
P61 VSP Series
Suction pad
P203
HMF Series
Compact wide parallel hand
P57
4G Series
3/4/5-port pilot operated valve
P73
GW Series
Fittings
P171ZW Series
Fittings(stainless-steel)
P172
CMK2 Series
Medium bore size cylinder
P5CMK2J Series
Medium bore size cylinder (stainless steel)
P11SCM Series
Round shaped cylinder
P15SCG Series
Tie rod air cylinder
P21
SCA2 Series
Medium bore size cylinder, tie rod type
P25SCS2 Series
Large bore size cylinder
P31SSD2 Series
Compact cylinder
P35STG-M Series
Guided cylinder
P41
FPV Series
Block valve
P189
2QV/3QV Series
Quick valve
P191
VSH/VSC Series
Discrete type ejector
P193
APK Series
Pilot kick type 2-port solenoid valve
P195
FH100 Series
Feather hand (mini-parallel hand)
P51
CKL2 Series
Powerful chuck
P63
SU/SD Series
High polymer membrane dryer
P159
EVD Series
Digital electro-pneumatic regulator
P167
DSC Series
Speed controller with adjusting dial
P175
SCL2 Series
Speed controller, inline with push-in fitting
P177
DVL-S Series
Needle valve with adjusting dial
P181
SC-M5 Series
Miniature speed controller
P183
SC3W Series
Speed controller, elbow with push-in fitting
P173
SC1 Series
Speed controller
P184
CKLG2 Series
Powerful chuck
P65
BHA/BHG Series
Compact cross roller parallel hand
P53
FH500 Series
Feather hand (mini-fulcrum hand)
P59
W1*00-W8*00 Series
Filter/regulator
P139
SMW/SMW2 Series
Metering valve with silencer
P185
SRL3 Series
Rodless cylinder
P45AF Series
Medium main line filter
P201
F1000-F8000 Series
Air filter
P143
R1*00-R8*00 Series
Regulator
P149
CHB/CHG Series
Compact rotary valve
P229
MXB/MXG Series
Oil-free motor driven 2-port ball valve
P231
SPKSeries
Pilot kick type 2-port solenoid valve for steam
P235
MYB3Series
Metal free solenoid valve
P237
HB Series
High corrosion resistant direct acting 2-port solenoid valve
P238
P1100-P8100 Series
Reed switch type compact pressure switch
P153
V1000/V3000/V3010/V6010/Series
Shut-off valve P155
AG31/41/33/43/34/44Series
Direct acting 3-port solenoid valve (general purpose valve)
P217
M(X)1000-M(X)8000 Series
Oil mist filter
P145
SAB Series
Air operated 2-port valve
P197
NAP Series
Air operated 3-port valve
P199
EXA Series
Pilot operated 2-port solenoid valve for compressed air
P205
ADK11-Z Series
Pilot operated 2-port solenoid valve for dry air (general purpose valve)
P223
LAD Series
Diaphragm type cylinder valve
P225
NAD Series
Diaphragm type cylinder valve
P227
GNAD Series
Diaphragm type cylinder valve, manifold
P228
FWD Series
Compact pilot operated solenoid valve for water
P207
USB/G Series
Compact direct acting 2/3-port solenoid valve
P209
AB31/41 Series
Direct acting 2-port solenoid valve (general purpose valve)
P215
FP2Materials conforming to the Food Sanitation Act are used.
Standard model supports. ............................................................................. P239
Contact CKD for details. ................................................................................ P240
Related products ........................................................................................... P243
Equipment for food manufacturing processes FP series
Bore size: φ 6/φ 10/φ 16
Specifications
Descriptions SCPD3SCPD3-L
Bore size mm φ 6 φ 10 φ 16Actuation Double actingWorking fluid Compressed airMax. working pressure MPa 1.0Min. working pressure MPa 0.15 0.1Proof pressure MPa 1.6Ambient temperature °C -10 to 60 (no freezing)Port size M5
Stroke tolerance mm +1.00
Working piston speed mm/s 50 to 750Cushion Rubber cushionLubrication Not requiredMax. energy absorption J 0.012 0.041 0.162Note 1: Described in above is specification of double acting/single rod.
Each description varies depending on variation. Refer to Pneumatic Cylinders I (CB-029SA) for details.
SCPD3-FP1 SeriesPencil shaped cylinder
Note 1: Custom stroke is available per mm.Note 2: Any of variation Z, ZL, M, ML doesn't have bore size 6.
Stroke (variation: blank, L, Z, ZL, M, ML, K, KL)Bore size (mm) Standard stroke (mm) Max. stroke (mm) Available stroke (mm) Min. stroke (mm)
φ 615/30/45/60
100 1055φ 10 200 210
φ 16 260 270
NSF H1
Note 1: Custom stroke is available per mm.
Stroke (variation: D, DL)Bore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm)
φ 615/30/45/60
605φ 10
120φ 16
Pneumatic Cylinders ICatalog No. CB-029SA
1
FP1
FP2
SCPD3-FP1 SeriesHow to order
[Example of model No.]SCPD3-ZL-00-10-15-O-T2H-R-FP1YModel No.: pencil shaped cylinder, grade grease specifications for foodA Variation : Double acting/integrated speed
controller/switchB Mounting style : BasicC Bore size : φ 10 mmD Stroke : 15 mmE Head end port direction : Axial directionF Switch model No. : Proximity T2H switch, lead wire 1 mG Switch : 1 (on rod end)H Accessory : Rod clevis
How to order
Model No.
A Variation
B Mounting styleBore size 6 10 16
00 Basic LS Axial foot (single) rod endFA Rod end flange CB Clevis bracket (pin and snap ring included)
D Stroke (mm)Refer to the stroke table on page 1.
Without switch
With switch
C Bore size (mm)6 φ 6
10 φ 1016 φ 16
E Head end port directionBlank Vertical
O Shaft direction
F Switch model No.Lead wire straight
Lead wire L-shaped Contact
VoltageIndicator Lead
wireAC DCT0H* T0V*
Reed1 color display
2 lineT5H* T5V* No indicator lampT2H* T2V*
Proximity
1 color display
2 lineT3H* T3V* 3 line
T2WH* T2WV* 2 color display
2 lineT3WH* T3WV* 3 line
* Lead wireBlank 1 m (standard)
3 3 m (option)5 5 m (option)
G Switch quantityR 1 (on rod end)H 1 (on head end)D 2T 3
H AccessoryBore size 6 10 16
I Rod eyeY Rod clevis (pin and snap ring included)
B1 Eye bracketB2 Clevis bracket
B Mounting style Note 1
C Bore size
D Stroke
E Head end port direction Note 1
F Switch model No. Note 3, Note 5 * indicates lead
wire
G Switch quantity
H Accessory Note 4
Note on model No. selectionNote 1: "CB" mounting style is not available when the port
direction is "0" (axial direction).Note 2: Refer to Pneumatic Cylinders I (CB-029SA) for
min. stroke with switch.Note 3: Magnet is not built in the type without switch.Note 4: "I" and "Y" cannot be selected simultaneously.Note 5: Switches are shipped with the product.
10 15 FP1
FP1
OZSCPD3 00 Y
SCPD3 00 10 15 OZL T2H R Y
Code DescriptionsA Variation
Bore size 6 10 16Blank Double acting/single rod
L Double acting/single rod/switchD Double acting/double rod
DL Double acting/double rod/switchZ Double acting/integrated speed controller
ZL Double acting/integrated speed controller/switch
M Double acting/non-rotationML Double acting/non-rotation type/switchK Double acting/high load
KL Double acting/high load/switch
2
How to order mounting bracketBore size (mm)
φ 6 φ 10 φ 16Mounting bracketFoot (LS) P2-LS-6 P2-LS-10 P2-LS-16Flange (FA) P2-FA-6 P2-FA-10 P2-FA-16
Note : The foot (LS) mounting bracket is provided as 1 pc./set.
SCPD3-FP1 Series
3
FP1
FP2
M E M OM E M O
4
Medium bore size cylinder
CMK2-FP1 Series Bore size: φ 20/φ 25/φ 32/φ 40
Descriptions CMK2Bore size mm φ 20 φ 25 φ 32 φ 40Working fluid Compressed airMax. working pressure MPa 1.0Min. working pressure MPa 0.1Proof pressure MPa 1.6Ambient temperature °C -10 to 60 (no freezing)Port size Rc1/8Stroke tolerance mm (≤200), (>200)Working piston speed mm/s 50 to 500Cushion Rubber cushionLubrication Not requiredMax. energy absorption J 0.166 0.308 0.424 0.639Note 1: Described in above is specification of double acting/single rod.
Each description varies depending on variation. Refer to Pneumatic Cylinders I (CB-029SA) for details.
Variation: Blank, R, C, B, M, Z, G2, G3, Air cushion: *C
Bore size (mm) Standard stroke (mm)
Max. stroke (mm) Min. stroke (mm)No
bellows Bellows No bellows Bellows "L" Bellows"J"
φ 20 25/50/75/100/150/200/250/300
750 650 5 25φ 25φ 32φ 40
Note 1: Custom stroke is available per mm.Note 2: Single foot (LS) has the max. stroke of 50 mm.Note 3: Contact CKD when the stroke shorter than 25 mm is necessary for "J" bellows.Note 4: Variations G2 and G3 don't support with bellows.
Stroke
Specifications
+2.00
+2.40
NSF H1
Variation: S, SR
Bore size (mm)Standard stroke
(mm)
Max. stroke (mm) Min. stroke (mm)No
bellows Bellows No bellows Bellows "L" Bellows"J"
φ 20 25/50/75/100/150300 300 5 25φ 25
φ 32 25/50/75/100/150/200φ 40
Note 1: Custom stroke is available per mm.Note 2: Single foot (LS) has the max. stroke of 50 mm.Note 3: Contact CKD when the stroke shorter than 25 mm is necessary for "J" bellows.
Variation: P
Bore size (mm) Standard stroke (mm)
Max. stroke (mm) Min. stroke (mm)No bellows Bellows No bellows Bellows
φ 2025/50/75/100/150/200/250/300
430 350 25 25φ 25φ 32φ 40 400
Note 1: Custom stroke is available per mm.Note 2: Single foot (LS) has the max. stroke of 50 mm.Note 3: Contact CKD when stroke is shorter than 25 mm.
Variation: D
Bore size (mm) Standard stroke (mm)
Max. stroke (mm) Min. stroke (mm)No
bellows Bellows No bellows Bellows "L" Bellows"J"
φ 20 25/50/75/100/150/200/250/300
480 300 5 25φ 25φ 32φ 40 450
Note 1: Custom stroke is available per mm.Note 2: Single foot (LS) has the max. stroke of 50 mm.Note 3: Contact CKD for each case, when the stroke shorter than 25 mm is necessary for "J" bellows.
Pneumatic Cylinders ICatalog No. CB-029SA
55
FP1
FP2
CMK2-FP1 SeriesHow to order
Note 1: Single foot (LS) has the max. stroke of 50 mm.Note 2: Refer to Pneumatic Cylinders I (CB-029SA) for min.
stroke with switch.Note 3: The instantaneous max. temperature is that at which
sparks, swarf, etc., instantaneously contact bellows.Note 4: "I" and "Y" cannot be selected simultaneously.Note 5: Refer to Pneumatic Cylinders I (CB-029SA) for
custom specifications of rod end form.Note 6: Refer to Pneumatic Cylinders I (CB-029SA) for
combination of variations/options.Note 7: Up to 3 switches can be mounted. If more than four
switches are required, switch mounting brackets for the extra switches must be prepared separately.
Note 8: For 20 or 25 bore size, the rod is stainless steel as standard and the rod nut is zinc chromate. If the stainless steel rod nut is necessary, select the "M" option.
Note 9: Option M cannot be selected, when either of variation G2 or G3 is selected.
2000 100 FP1 YCMK2With switch
Without switch
How to order
Note on model No. selection
Model No.: Medium bore size cylinder, grade grease specifications for foodA Variation : Double acting/non-rotation B Mounting style : Basic C Bore size : φ 20 mmD Port thread type : Rc threadE Stroke : 100 mmF Switch model No. : Reed T0H switch, lead wire 1 mG Switch quantity : 1 (on rod end)H Option : Boss cut offI Accessory : Rod clevis
CMK2-M-00-20-100-T0H-R-VFP1Y[Example of model No.]
T0H2000 100 FP1RM
M
YVCMK2
VariationA
Bore sizeC
Port thread typeD
Switch model No.F
Stroke Note 1
E
Switch quantityNote 7
G
OptionNote 3
H
AccessoryNote 4
I
Code DescriptionsVariation
Blank Double acting/single rodS Single acting/push
SR Single acting/pull C Double acting/air cushionedD Double acting/double rodM Double acting/non-rotationZ Double acting/integrated speed controller
G2 Double acting/coolant proof (packing seal material NBR)G3 Double acting/coolant proof (packing seal material FKM)
Switch model No.Refer to the switch model No. on page 10.
Switch quantityR 1 (on rod end)H 1 (on head end)D 2T 3
OptionMax. ambient temperature
Instantaneous max. temperature
J Bellows 100°C 200°CL Bellows 250°C 400°CM Piston rod material (stainless steel) Note 8/Note 9V Boss cut off
AccessoryI Rod eyeY Rod clevis (pin and split washer pin included)
B2 Clevis bracket (pin and snap ring included)
A
Mounting style00 BasicLB Axial foot (both sides)LS Axial foot (single)FA Rod end flangeFB Head end flangeCA Eye bracketCC Eye bracket integratedCC1 Eye bracket, bush pressfitCB Clevis bracket (pin and split washer pin included)TA Rod end trunnionTB Head end trunnion
Bore size (mm)20 φ 20 Note 825 φ 25 Note 832 φ 3240 φ 40
Port thread typeBlank Rc thread
NN NPT thread (custom order product)GN G thread (custom order product)
Stroke (mm)Refer to the stroke table on page 5.
B
C
D
E
F
G
H
I
Mounting styleNote 1
B
6
Note 1: Single foot (LS) has the max. stroke of 50 mm.Note 2: Refer to Pneumatic Cylinders I (CB-029SA) for min.
stroke with switch.Note 3: The instantaneous max. temperature is that at which
sparks, swarf, etc., instantaneously contact bellows.Note 4: "I" and "Y" cannot be selected simultaneously.Note 5: Refer to Pneumatic Cylinders I (CB-029SA) for custom
specifications of rod end form.Note 6: Refer to Pneumatic Cylinders I (CB-029SA) for
combination of variations/options.Note 7: Up to 3 switches can be mounted. If more than four
switches are required, switch mounting brackets for the extra switches must be prepared separately.
Note 8: For 20 or 25 bore size, the rod is stainless steel as standard and the rod nut is zinc chromate. If the stainless steel rod nut is necessary, select the "M" option.
CMK2-00-20C-100-T0H-R-VFP1YModel: Medium bore size cylinder with rubber air cushion, grade grease specifications for foodA Mounting style : Basic B Bore size : φ 20 mmC Port thread type : Rc threadD Stroke : 100 mmE Switch model No. : Proximity T0H switch, lead wire 1 mF Switch quantity : 1 (on rod end)G Option : Boss cut offH Accessory : Rod clevis
[Example of model No.]
With switch
Without switchHow to order
Bore sizeB
Rubber air cushioned
Model No.
Port thread typeC
D Stroke Note 1
Switch model No.* indicates the lead wire
E
Switch quantityNote 7
F
OptionNote 3
G
AccessoryNote 4
H
Y00 VC20 100 FP1
FP1
CMK2
Y100 T0H00 VRC20CMK2
A
Code DescriptionsMounting style
00 Basic LB Axial foot (both sides)LS Axial foot (single)FA Rod end flange FB Head end flangeCA Eye bracketCC Eye bracket integrated CC1 Eye bracket, bush pressfit CB Clevis bracket (pin and split washer pin included)TA Rod end trunnionTB Head end trunnion
Bore size (mm)20 φ 20 Note 825 φ 25 Note 832 φ 3240 φ 40
Port thread typeBlank Rc thread
N NPT thread (custom order product)G G thread (custom order product)
Stroke (mm)Refer to the stroke table on page 5.
Switch model No.Lead wire straight
Lead wire L-shaped Co
ntact Voltage Display Lead
wireAC DCT0H* T0V*
Ree
d 1 color display2 lineT5H* T5V* No indicator lamp
T8H* T8V* 1 color displayT1H* T1V*
Pro
xim
ity1 color display
2 lineT2H* T2V*T3H* T3V*
3 lineT3PH* T3PV* 1 color display type (custom)
T2WH* T2WV*
2 color display 2 lineT2YH* T2YV*
T3WH* T3WV*3 lineT3YH* T3YV*
T2JH* T2JV* 1 color display off-delay 2 line
* Lead wireBlank 1 m (standard)
3 3 m (option)5 5 m (option)
Switch quantityR 1 (on rod end)H 1 (on head end)D 2T 3
OptionMax. ambient temperature
Instantaneous max. temperature
J Bellows 100°C 200°CL Bellows 250°C 400°CM Piston rod material (stainless steel) Note 8V Boss cut off
AccessoryI Rod eyeY Rod clevis (pin and split washer pin included)
B2 Clevis bracket (pin and snap ring included)
A
B
C
D
E
F
G
H
Note on model No. selection
CMK2-*C-FP1 Series
Mounting styleNote 1
7
FP1
FP2
Code DescriptionsVariationP Double acting/stroke adjustable (push)R Double acting/stroke adjustable (pull)
Mounting style00 Basic LB Axial foot (both sides)LS Axial foot (single)FA Rod end flange FB Head end flange TA Rod end trunnion TB Head end trunnion
Bore size (mm)20 φ 20 Note 825 φ 25 Note 832 φ 3240 φ 40
Port thread typeBlank Rc thread
NN NPT thread (custom order product)GN G thread (custom order product)
Stroke (mm)Refer to the stroke table on page 5.
Adjustable stroke range (mm)25 2550 50
Switch model No.Refer to the switch model No. on page 10.
Switch quantityR 1 (on rod end)H 1 (on head end)D 2T 3
OptionMax. ambient temperature
Instantaneous max. temperature
J Bellows 100°C 200°CL Bellows 250°C 400°CM Piston rod material (stainless steel) Note 8
AccessoryI Rod eyeY Rod clevis (pin and split washer pin included)
B2 Clevis bracket (pin and snap ring included)
Note 1: Single foot (LS) has the max. stroke of 50 mm.Note 2: Refer to Pneumatic Cylinders I (CB-029SA) for
min. stroke with switch.Note 3: The instantaneous max. temperature is that at
which sparks, swarf, etc., instantaneously contact bellows.
Note 4: "I" and "Y" cannot be selected simultaneously.Note 5: Refer to Pneumatic Cylinders I (CB-029SA) for
custom specifications of rod end form.Note 6: Refer to Pneumatic Cylinders I (CB-029SA) for
combination of variations/options.Note 7: Up to 3 switches can be mounted. If more than
four switches are required, switch mounting brackets for the extra switches must be prepared separately.
Note 8: For 20 or 25 bore size, the rod is stainless steel as standard and the rod nut is zinc chromate. If the stainless steel rod nut is necessary, select the "M" option.
Note on model No. selection
T0H D IMP 25100 FP13200CMK2
Model No.: Medium bore size cylinder, grade grease specifications for foodA Variation : Double acting/stroke adjustable (push)B Mounting style : BasicC Bore size : φ 32 mmD Port thread type : Rc threadE Stroke : 100 mmF Adjustable stroke range : 25 mmG Switch model No. : Reed T0H switch, lead wire 1 mH Switch quantity : 2I Option : Piston rod material stainless steelJ Accessory : Rod eye
CMK2-P-00-32-100-25-T0H-D-MFP1I[Example of model No.]
With switch
Without switch
How to order
IMP 25100 FP100CMK2 32
VariationA
D Port thread type
Stroke E
Adjustable stroke rangeF
Switch model No.G
I
H
A
B
C
D
E
F
G
H
I
J
Bore sizeC
Switch quantityNote 7
OptionNote 3
CMK2-FP1 SeriesHow to order
Accessory Note 5J
Mounting styleNote 1
B
8
Code DescriptionsVariationB Double acting/back to back
Mounting style00 BasicLB Axial foot (both sides)FA Rod end flange
Bore size (mm)20 φ 20 Note 725 φ 25 Note 732 φ 3240 φ 40
Port thread typeBlank Rc thread
NN NPT thread (custom order product)GN G thread (custom order product)
Stroke (mm)Refer to the stroke table on page 5.
Switch quantityR 1 (on rod end)H 1 (on head end)D 2T 3
OptionMax. ambient temperature
Instantaneous max. temperature
J Bellows 100°C 200°CL Bellows 250°C 400°CM Piston rod material (stainless steel) Note 7
AccessoryI Rod eyeY Rod clevis (pin and split washer pin included)
B2 Clevis bracket (pin and snap ring included)
Bore size
Note 1: Refer to Pneumatic Cylinders I (CB-029SA) for min. stroke with switch.
Note 2: The instantaneous max. temperature is that at which sparks, swarf, etc., instantaneously contact bellows.
Note 3: Refer to Pneumatic Cylinders I (CB-029SA) for custom specifications of rod end form.
Note 4: Refer to Pneumatic Cylinders I (CB-029SA) for combination of variations/options.
Note 5: As a spacer is used for port adjustment in the back to back, the X and M dimensions include 0 to 1.5 mm tolerance.
Note 6: Up to 3 switches can be mounted. If more than four switches are required, switch mounting brackets for the extra switches must be prepared separately.
Note 7: For 20 or 25 bore size, the rod is stainless steel as standard and the rod nut is zinc chromate. If the stainless steel rod nut is necessary, select the "M" option.
Note on model No. selection
1st step stroke 25 mm (S1)+ 2nd step stroke 50 mm (S2) Total stroke 75 mm (S1 + S2)
Model No.: Medium bore size cylinder, grade grease specifications for foodA Variation : Double acting, back to backB Mounting style : BasicC Bore size : φ 20 mmD Port thread type : Rc threadE Stroke (S1) : 25 mmF Switch model No. (S1) : Reed T0H switch
Lead wire 1 mG Switch quantity (S1) : 2E Stroke (S2) : 50 mmF Switch model No. (S2 ) : Reed T0H switch, lead wire 1 mG Switch quantity (S2) : 1 (on rod end)H Option : Bellows, max. ambient temperature 100°C,
instantaneous max. temperature 200°CI Accessory : Rod eye
CMK2-B-00-20-25-T0H-D-50-T0H-R-JFP1I[Example of model No.]
Cylinder 2 stroke
50252000 IJBCMK2 FP1
Mounting style
Variation
With switch
S2S1
Cylinder 2Cylinder 1
Cylinder 1 stroke
Without switch
How to order
IJB 2000 T0HT0H 5025 D RCMK2 FP1
B
A
C
D
E
F F
E
Switch quantityNote 6
G G
Port thread type
Stroke Note 1
Stroke
Switch model No. Switch model No.
Switch quantity
H OptionNote 2
A
B
C
D
E
CMK2-FP1 Series
AccessoryI
Switch model No.Lead wire straight
Lead wire L-shaped Co
ntact Voltage
Display Lead wireAC DC
T0H* T0V*
Ree
d 1 color display 2 line
T5H* T5V* No indicator lampT8H* T8V* 1 color displayT1H* T1V*
Pro
xim
ity
1 color display 2 lineT2H* T2V*
T3H* T3V* 3 lineT3PH* T3PV* 1 color display (custom) 3 lineT2WH* T2WV*
2 color display 2 lineT2YH* T2YV*
T3WH* T3WV*3 lineT3YH* T3YV*
T2JH* T2JV* 1 color display off-delay 2 line* Lead wire
Blank 1 m (standard)3 3 m (option)5 5 m (option)
F
G
H
I
S2S1
9
FP1
FP2
CMK2-FP1 SeriesHow to order
Bore size (mm) φ 20 φ 25 φ 32 φ 40Mounting bracketBasic (00) Note 3 M1-00-20 M1-00-30 M1-00-30 M1-00-30Axial foot (LB/LS) M1-LB-20 M1-LB-30 M1-LB-30 M1-LB-30Flange (FA/FB) M1-FA-20 M1-FA-30 M1-FA-30 M1-FA-30Trunnion (TA/TB) M1-TA-20 M1-TA-30 M1-TA-30 M1-TA-40Eye bracket (CA) M1-CA-20 M1-CA-30 M1-CA-30 M1-CA-30Clevis bracket (CB) M1-CB-20 M1-CB-30 M1-CB-30 M1-CB-30
Note 1: As for mounting brackets, mounting nuts and toothed washers are supplied with the axial foot and flange. The trunnion includes mounting nuts.Note 2: For axial foot (both sides), 2 sets of the "M1-LB-*1 above are required.Note 3: Mounting nut, toothed washer only. As the basic (00) of the product is supplied with one set of it, please use it when needed for an addition.
How to order mounting bracket
Switch model No.Lead wire straight
Lead wire L-shaped Co
ntac
t
VoltageDisplay Lead wire
AC DCT0H* T0V*
Reed1 color display
2 lineT5H* T5V* No indicator lampT8H* T8V* 1 color displayT1H* T1V*
Proximity
1 color display2 line
T2H* T2V*T3H* T3V* 3 line
T3PH* T3PV* 1 color display (custom) 3 lineT2WH* T2WV*
2 color display 2 line
T2YH* T2YV*T3WH* T3WV*
3 lineT3YH* T3YV*T2JH* T2JV* 1 color display off-delay 2 line
* Lead wire Blank 1 m (standard)
3 3 m (option)5 5 m (option)
Switch model No.Variation: Blank, S, SR, C, D, M, Z, B
Variation: G2, G3Switch model No.
Lead wire straight
Lead wire L-shaped Co
ntac
t VoltageDisplay Lead wire
AC DCT2YLH* T2YLV*
Prox
imity
2 color display2 line
T3YLH* T3YLV* 3 line* Lead wire
Blank 1m (standard)3 3m (option)5 5m (option)
10
11
Medium bore size cylinder/all stainless steel exterior/waterproof type
CMK2-JG2/JG3-FP1 Series● Bore size: φ 20/φ 25/φ 32/φ 40
JIS symbol
Descriptions CMK2-JG2/JG3Bore size mm φ 20 φ 25 φ 32 φ 40Actuation Double acting/water-resistantWorking fluid Compressed airMax. working pressure MPa 1.0Min. working pressure MPa 0.15Proof pressure MPa 1.6 Ambient temperature °C -10 to 60 (no freezing) Port size Rc 1/8Stroke tolerance mm (0 to 200) (>200)Working piston speed mm/s 50 to 500Cushion Rubber cushionLubrication Not requiredMax. absorbed energy J 0.166 0.308 0.424 0.639
Bore size (mm) Standard stroke (mm)
Max. stroke (mm)
Min. stroke (mm)
Min. stroke/switch (mm)
φ 20, φ 25, φ 32, φ 40
25, 50, 75, 100, 150, 200, 250, 300
750 5 25
Note 1: The custom stroke is available in 1 mm increments.Note 2: Single foot (LS) has max. stroke of 50 mm.
Stroke
Specifications
+2.00
+2.40
Medium bore size cylinder CMK2 SeriesCatalog No. CC-1298A
NSF H1
FP1
FP2
12
Item/mounting Product weight when stroke (S) = 0 mm Switch weight (per 1 pc.)
Switch rail + band weight
Additional weight per S = 10 mmBasic
(00)Axial foot
(LB)Axial foot
(LS)Flange
(FA, FB)Eye bracket
(CC)Bore size (mm)φ 20 0.31 0.57 0.44 0.46 0.37 Refer to weight
indicated in the switch specifications.
0.005 0.01φ 25 0.32 0.58 0.45 0.47 0.39 0.005 0.01φ 32 0.43 0.69 0.56 0.58 0.55 0.009 0.02φ 40 0.65 0.91 0.78 0.80 0.90 0.009 0.02
Product stroke (50) 10
Product weight when S = 0 mm ...........0.56kgAdditional weight when S = 50 mm .....Additional weight when S = 10 mm 0.02 × = 0.10 kgWeight of 2 switches ............................0.062kgWeight of switch rail + 2 bands ............0.018kgProduct weight .....................................0.56 kg + 0.1 kg + 0.062 kg + 0.018 kg = 0.74 kg
CMK2-JG2/JG3 SeriesSpecifications
Type/model No. Proximity switch specificationsDescriptions T2YLH/T2YLV T3YLH/T3YLVApplications Programmable controller Programmable controller, relayOutput method − NPN outputPower supply voltage − 10 to 28 VDCLoad voltage/current 10 to 30 VDC, 5 to 20 mA Note 1 ≤ 30 VDC, ≤ 50 mAIndicator lamp Red/green LED (lit when ON)Leakage current ≤ 1mA ≤ 10 μAShock resistance 980 m / s2
Weight g 1 m: 33 3 m: 87 5 m: 142
(Example) Product weight of CMK2-JG2-FA-32-50-T2YL-D
Cylinder weight
Note 1: The above max. load current is 20 mA at 25°C. The current is lower than 20 mA if the operating ambient temperature around the switch is higher than 25˚C. (5 to 10 mA at 60˚C)
Switch specifications
Theoretical thrust tableBore size
(mm)Operating direction
Working pressure MPa0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
φ 20Push 31.4 47.1 62.8 94.2 1.26 x 102 1.57 x 102 1.88 x 102 2.20 x 102 2.51 x 102 2.83 x 102 3.14 x 102
Pull 23.6 35.3 47.1 70.7 94.2 1.18 x 102 1.41 x 102 1.65 x 102 1.88 x 102 2.12 x 102 2.36 x 102
φ 25Push 49.1 73.6 98.2 1.47 x 102 1.96 x 102 2.45 x 102 2.95 x 102 3.44 x 102 3.93 x 102 4.42 x 102 4.91 x 102
Pull 37.8 56.7 75.6 1.13 x 102 1.51 x 102 1.89 x 102 2.27 x 102 2.64 x 102 3.02 x 102 3.40 x 102 3.78 x 102
φ 32Push 80.4 1.21 x 102 1.61 x 102 2.41 x 102 3.22 x 102 4.02 x 102 4.83 x 102 5.63 x 102 6.43 x 102 7.24 x 102 8.04 x 102
Pull 69.1 1.04 x 102 1.38 x 102 2.07 x 102 2.76 x 102 3.46 x 102 4.15 x 102 4.84 x 102 5.53 x 102 6.22 x 102 6.91 x 102
φ 40Push 1.26 x 102 1.88 x 102 2.51 x 102 3.77 x 102 5.03 x 102 6.28 x 102 7.54 x 102 8.80 x 102 1.01 x 103 1.13 x 103 1.26 x 103
Pull 1.10 x 102 1.65 x 102 2.21 x 102 3.31 x 102 4.41 x 102 5.51 x 102 6.62 x 102 7.72 x 102 8.82 x 102 9.92 x 102 1.10 x 103
(Unit: N)
(Unit: kg)
13
CMK2-JG2/JG3 Series
A
B
C
D
E
Note 1: Single foot (LS) has the max. stroke of 50 mm.Note 2: Refer to page 11 for the min. stroke with switch.Note 3: “I” and “Y” cannot be selected togetherNote 4: Up to 3 switches can be mounted. If four or more switches
are required, switch mounting brackets for the extra switches must be prepared separately.
Model: Medium bore size cylinder, food grade grease A Variation : All stainless steel exterior + water-resistant scraper + packing NBRB Mounting type : Eye bracket integrated C Bore size : φ 32D Stroke : 50 mmE Switch model No. : Proximity switch T2YLH, lead wire 1 mF Switch quantity : 2 includedG Option : Food grade greaseH Accessory : Rod clevis
CMK2-JG2-CC-32-50-T2YLH-D-FP1Y[Example of model No.]
With switch
Without switch
How to order
T2YL YR V20
20
50
50 FP1
00
00JG2
FP1CMK2
CMK2
Variation
Bore size
Stroke
G Option
F Switch quantityNote 4
Precautions for model No. selection
Code DescriptionsA VariationJG2 All stainless steel exterior + water-resistant scraper + packing NBRJG3 All stainless steel exterior + water-resistant scraper + packing FKM
B Mounting type00 Basic LB Axial foot (both sides)LS Axial foot (one side)FA Rod end flange FB Head end flange CC Eye bracket integrated
C Bore size (mm)20 φ 2025 φ 2532 φ 3240 φ 40
D Stroke (mm)Bore size Stroke Note 2 Custom stroke
φ 20 5 to 750
In 1 mm incrementsφ 25 5 to 750φ 32 5 to 750φ 40 5 to 750
E Switch model No.Axial
lead wireRadial
lead wire Contact Voltage Display Lead wire
T2YLH* T2YLV*Proximity DC 2-color
display 2-wire
T3YLH* T3YLV* 3-wire
F Switch quantityR One on rod endH One on head endD 2T 3
G OptionBlank Standard
V Boss cut off
H AccessoryI Rod eyeY Rod clevis (pin and snap ring included)
JG2
H Accessory Note 3
Mounting typeNote 1
Switch model No.* indicates
lead wire
FP1
FP2
14
M E M OM E M O
NSF H1Round shaped cylinder
SCM-FP1 Series Bore size: φ 20/φ 25/φ 32/φ 40
φ 50/φ 63/φ 80/φ 100
Note 1: Custom stroke is available per mm.
Note 1: Custom stroke is available per mm.
Note 1: Custom stroke is available per mm.
Note 1: Described in left is specification of double acting/single rod.
Each description varies depending on variation. Refer to Pneumatic Cylinders I (CB-029SA) for details.
Note 2: The values of "No cushion" of max. absorbed energy are the max. absorbed energy of either the head end for air cushion "R" or the rod end for air cushion "H".
Note 3: Without any cushion, this product cannot absorb large energy generated by external load. We recommend to use an external shock absorber.
Specifications
Stroke
Descriptions SCMBore size mm φ 20 φ 25 φ 32 φ 40 φ 50 φ 63 φ 80 φ 100Working fluid Compressed airMax. working pressure MPa 1.0Min. working pressure MPa 0.1 0.05Proof pressure MPa 1.6Ambient temperature °C -10 to 60 (no freezing)
Port sizeRubber cushion Rc1/8 Rc1/4 Rc3/8 Rc1/2Air cushion M5 Rc1/8 Rc1/4 Rc3/8 Rc1/2
Stroke tolerance mm
Rubber cushion
+ 1.4 0 (to 1000)
+ 1.4 0 (to 1500)
+ 2.3 0 (to 1000) ,
+ 2.7 0 (to 1500)
Air cushion+ 1.4
0 (to 1000)+ 1.4
0 (to 1500)+ 1.4
0 (to 1000) , + 1.8
0 (to 1500)
Working piston speed mm/s 30 to 1000 (Operate under the max. absorbed energy)Cushion Either rubber cushion or air cushion can be selected.Effective air cushion length mm 8.1 8.1 8.6 8.6 13.4 13.4 15.4 15.4Lubrication Not requiredMax.energy absorption J
Rubber cushion 0.1 0.2 0.5 0.9 1.6 1.6 3.3 5.8Air cushion 0.8 1.2 2.5 3.7 8.0 14.4 25.4 45.6No cushion - - - - 0.057 0.057 0.112 0.153
Variation: Blank, RBore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm)
φ 20
25, 50, 75, 100, 125, 150, 200, 250, 300
1000
10
φ 25φ 32φ 40
1500φ 50φ 63φ 80
φ 100
Variation: X, YBore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm)
φ 20 25, 50, 75100, 125150, 200
200 5φ 25φ 32φ 40
Note 1: Custom stroke is available per mm.Note 2: Stroke of more than 600 mm will be custom
order. Contact CKD for details.
Variation: P, D, W, W4, MBore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm)
φ 20
25, 50, 75100, 125, 150200, 250, 300
600 10
φ 25φ 32φ 40φ 50φ 63
Variation: BBore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm)
φ 20
25, 50, 75100, 125, 150200, 250, 300
500
10
φ 25φ 32φ 40
750φ 50φ 63
Pneumatic Cylinders ICatalog No. CB-029SA
15
FP1
FP2
Model No.: Round shaped cylinder, grade grease specifications for foodA Variation : Double acting/non-rotation B Mounting style : Axial foot C Bore size : φ 40 mmD Port thread type : Rc threadE Cushion : Both sides air cushionedF Stroke : 100 mmG Switch model No. : Proximity T2H switch, lead wire 1 mH Switch quantity : 2I Switch mounting style : Rail J Option : Bellows, max. ambient temperature 60°C,
instantaneous max. temperature 100°CK Accessory : Rod eye
SCM-FP1 SeriesHow to order
Bore sizeC
Port thread typeD
CushionNote 4
E
F
Switch model No.Note 5
G
Switch mounting style
I
AccessoryNote 9
K
OptionNote 2Note 6Note 8
J
VariationNote 1
With switch
Without switch
How to order
A
Note 1: Mounting bracket will be shipped with the product.Note 2: If the product is supplied with bellows and the
mounting bracket is LB, FA, it will be included with the product.
Note 3: Refer to Pneumatic Cylinders I (CB-029SA) for min. stroke with switch.
Note 4: Air cushion cannot be selected for variation symbol X and Y.
Note 5: T8H/V switches cannot be mounted when the bore size is from φ 20 to φ 40 and the switch mounting style is rail.
Note 6: The instantaneous max. temperature is that at which sparks, swarf, etc., instantaneously contact bellows.
Note 7: Refer to Pneumatic Cylinders I (CB-029SA) for custom specifications of rod end form.
Note 8: "Q" (switch rail included at shipment) is not available for the "Z" switch mounting style.
Note 9: "I" and "Y" cannot be selected simultaneously.Note 10: Switches are shipped with the product. Contact CKD
assembly when shipping is required.
SCM-M-LB-40B-100-T2H-D-JFP1I[Example of model No.]
Note on model No. selection
Code DescriptionsA Variation
Bore size 20 25 32 40 50 63 80 100Blank Double acting/single rod
X Single acting/push Y Single acting/pull D Double acting/double rod
W4 Double acting/tandem M Double acting/non-rotation
B Mounting styleBore size 20 25 32 40 50 63 80 100
00 Basic LB Axial foot FA Rod end flange FB Head end flange CA Eye bracket CB Clevis bracket (pin and snap ring included)TA Rod end trunnion TB Head end trunnion
C Bore size (mm)20 φ 2025 φ 2532 φ 3240 φ 4050 φ 5063 φ 6380 φ 80100 φ 100
D Port thread typeBlank Rc thread
N NPT thread (custom order product) Air cushion: ≥ φ 32G G thread (custom order product) Air cushion: ≥ φ 32
E CushionB Both sides air cushionedR Rod end air cushionedH Air cushion on rod endD Both sides rubber cushioned
Stroke (mm)Refer to the stroke table on page 15.
G Switch model No.Refer to the switch model No. on page 19.
H Switch quantityR 1 (on rod end)H 1 (on head end)D 2T 34 4 (when there are more than 4 switches, indicate switch quantity.)
I Switch mounting styleBlank Rail
Z Band J Option
Max. ambient temperature Instantaneous max. temperatureJ Bellows 60°C 100°CK Bellows 100°C 200°CL Bellows 250°C 400°CQ Switch rail included at shipmentM Piston rod material stainless steel
K AccessoryBore size 20 25 32 40 50 63 80 100
I Rod eyeY Rod clevis (pin and snap ring included)
B1 Eye bracketB2 Clevis bracket
F
LB 40 BM FP1J100SCM
LB 40 BM FP1D JSCM 100 T2H
I
I
Mounting styleNote 1, Note 2
B
Stroke Switch quantityH
16
SCM-FP1 Series
Note 1: A mounting bracket will be shipped with the product if LB, FB or TB is selected. FA/TA will be included with the product.
Note 2: Refer to Pneumatic Cylinders I (CB-029SA) for min. stroke with switch.
Note 3: T8H/V switches cannot be mounted when the bore size is from φ 20 to φ 40 and the switch mounting style is rail.
Note 4: The instantaneous max. temperature is that at which sparks, swarf, etc., instantaneously contact bellows.
Note 5: Refer to Pneumatic Cylinders I (CB-029SA) for custom specifications of rod end form.
Note 6: "Q" (switch rail included at shipment) is not available for the "Z" switch mounting style.
Note 7: "I" and "Y" cannot be selected simultaneously.Note 8: Switches are shipped with the product. Contact
CKD assembly when shipping is required.
Bore size
Port thread type
Cushion
Adjustable stroke range
Switch model No.Note 3
Switch quantity
Switch mounting style
Model No.: Round shaped cylinder, grade grease specifications for foodA Variation : Double acting/stroke adjustable (push)B Mounting style : Axial footC Bore size : φ 40 mmD Port thread type : Rc threadE Cushion : Both sides rubber cushionedF Stroke : 100 mmG Adjustable stroke range : 25 mmH Switch model No. : Reed T0H switch, lead wire 1 mI Switch quantity : 2J Switch mounting style : Rail K Option : Bellows, max. ambient temperature 60°C,
instantaneous max. temperature 100°CL Accessory : Rod eye
SCM-P-LB-40D-100-25-T0H-D-JFP1I[Example of model No.]
OptionNote 4, Note 6
How to order
VariationA
C
E
D
Stroke F
G
H
I
J
K
Note on model No. selection
Code DescriptionsA Variation
P Double acting/stroke adjustable (push)R Double acting/stroke adjustable (pull)
B Mounting style00 Basic LB Axial foot FA Rod end flange TA Rod end trunnion TB Head end trunnion
C Bore size (mm)20 φ 2025 φ 2532 φ 3240 φ 4050 φ 5063 φ 63
D Port thread typeBlank Rc thread
N NPT thread (custom order product)G G thread (custom order product)
E CushionD Both sides rubber cushioned
F Stroke (mm)Refer to the stroke table on page 15.
G Adjustable stroke range (mm)25 2550 50
H Switch model No.Refer to the switch model No. on page 19.
I Switch quantityR 1 (on rod end)H 1 (on head end)D 2T 34 4 (when there are more than 4 switches, indicate switch quantity.)
J Switch mounting styleBlank Rail
Z Band K Option
Max. ambient temperature
Instantaneous max. temperature
J Bellows 60°C 100°CK Bellows 100°C 200°CL Bellows 250°C 400°CQ Switch rail included at shipmentM Piston rod material (stainless steel)
L AccessoryI Rod eyeY Rod clevis (pin and snap ring included)
B2 Clevis bracket
LB FP140 DP IJ100 25SCM
SCMWith switch
Without switch
40 DP 100 25 ID JT0HLB FP1Accessory Note 7L
Mounting style Note 1
B
17
FP1
FP2
Note 1: Mounting bracket will be shipped with the product.Note 2: If the product is supplied with bellows and the mounting bracket
is LB, FA, or TA, it will be included with the product.Note 3: Refer to Pneumatic Cylinders I (CB-029SA) for min. stroke with
switch.Note 4: Value at stroke S1=S2 cannot be selected for variation W.Note 5: T8H/V switches cannot be mounted when the bore size is from
φ 20 to φ 40 and the switch mounting style is rail.Note 6: The instantaneous max. temperature is that at which sparks,
swarf, etc., instantaneously contact bellows.Note 7: Refer to Pneumatic Cylinders I (CB-029SA) for custom
specifications of rod end form.Note 8: "Q" (switch rail included at shipment) is not available for the "Z"
switch mounting style.Note 9: Switches are shipped with the product. Contact CKD assembly
when shipping is required.
Cylinder 2
Cylinder 1
SCM-B-LB-40-D25-T0H-D-D50-T0H-R-JFP1Y[Example of model No.]
Model No.: Round shaped cylinder, grade grease specifications for foodA Variation : Double acting, back to back B Mounting style : Axial foot C Bore size : φ 40 mmD Port thread type : Rc threadE Cushion : Both sides rubber cushionedF Stroke : S1 = 25 mmE Cushion : Both sides rubber cushionedF Stroke : S2 = 50 mmG Switch model No. : Reed T0H switch, lead wire 1 mH Switch quantity : 2 (cylinder 1),
Cylinder 2: 1 (on rod end)I Switch mounting style : Rail J Option : Bellows, max. ambient temperature 60°C,
instantaneous max. temperature 100°CK Accessory : Rod clevis
S2S1
Cylinder 2Cylinder 1
W: 1st stage stroke B: Cylinder 2 stroke
W: Total stroke B: Cylinder 1 stroke
SCM 50D2540 YDB JLB FP1
SCM 50D25 T0H T0HDB D RLB FP1With switch
Without switchHow to order
B
Note on model No. selection
Switch quantity
OptionNote 6Note 8
H
J
40
Switch mounting style
I
Switch quantity
H
Switch model No.Note 3
G G Switch model No.
FF
CushionE CushionE
D Port thread type
D
Bore size
Variation
C
A
YJ
Code DescriptionsA Variation
B Back to back W Two stage
B Mounting style00 Basic LB Axial foot FA Cylinder 1 side flange FB Cylinder 2 side flange TA Cylinder 1 side trunnion TB Cylinder 2 side trunnion
C Bore size (mm)20 φ 2025 φ 2532 φ 3240 φ 4050 φ 5063 φ 63
D Port thread typeBlank Rc thread
N NPT thread (custom order product)G G thread (custom order product)
E CushionD Both sides rubber cushioned
F Stroke (mm)
Bore sizeB W Note 4
S1 S2 S1 S2
φ 20 to φ 32 10 to 500
10 to 500 10 to
60010 to 200
φ 40 to φ 63 10 to 750
10 to 750
G Switch model No.Refer to the switch model No. on page 19.
H Switch quantityR 1 (on rod end)H 1 (on head end)D 2T 34 4 (when there are more than 4 switches, indicate switch quantity.)
I Switch mounting styleBlank Rail
Z Band
J OptionMax. ambient temperature
Instantaneous max. temperature
J Bellows 60°C 100°CK Bellows 100°C 200°CL Bellows 250°C 400°CQ Switch rail included at shipmentM Piston rod material (stainless steel)
K AccessoryI Rod eyeY Rod clevis (pin and snap ring included)
B2 Clevis bracket
SCM-FP1 SeriesHow to order
AccessoryK
Port thread type
Mounting styleNote 1
Stroke = S2 Note 4
Stroke = S1 Note 4
B: Cylinder 1 Cylinder 2
W: Cylinder 1 Cylinder 2
18
Note 1: All mounting brackets are supplied with mounting bolts.Note 2: Foot mounting bracket is provided as 2 pcs./set.
How to order mounting bracket
Switch model No.
Bore size (mm)φ 20 φ 25 φ 32 φ 40 φ 50 φ 63 φ 80 φ 100
Mounting bracketFoot (LB) SCM-LB-20 SCM-LB-25 SCM-LB-32 SCM-LB-40 SCM-LB-50 SCM-LB-63 SCM-LB-80 SCM-LB-100Flange (FA/FB) SCM-FA-20 SCM-FA-25 SCM-FA-32 SCM-FA-40 SCM-FA-50 SCM-FA-63 SCM-FA-80 SCM-FA-100Eye bracket (CA) SCM-CA-20 SCM-CA-25 SCM-CA-32 SCM-CA-40 SCM-CA-50 SCM-CA-63 - -Clevis bracket (CB) - - - - - - SCM-CB-80-FP1 SCM-CB-100-FP1Trunnion (TA/TB) SCM-TA-20-FP1 SCM-TA-25-FP1 SCM-TA-32-FP1 SCM-TA-40-FP1 SCM-TA-50-FP1 SCM-TA-63-FP1 - -
Switch model No.Lead wire straight
Lead wire L-shaped Co
ntac
t
VoltageDisplay Lead wire
AC DCT0H* T0V*
Ree
d 1 color display2 lineT5H* T5V* No indicator lamp
T8H* T8V* 1 color display T1H* T1V*
Pro
xim
ity1 color display
2 lineT2H* T2V*T3H* T3V*
3 lineT3PH* T3PV* 1 color display (custom)T2WH* T2WV*
2 color display2 line
T2YH* T2YV*T3WH* T3WV*
3 lineT3YH* T3YV*T2YD* - 2 color display
AC magnetic field 2 lineT2YDT* -T2JH* T2JV* 1 color display off-delay 2 line
* Lead wireBlank 1 m (standard)
3 3 m (option)5 5 m (option)
SCM-FP1 Series
19
FP1
FP2
M E M OM E M O
20
NSF H1Tie rod cylinder
SCG-FP1 Series Bore size: φ 32/φ 40/φ 50/φ 63/φ 80/φ 100
Specifications
Stroke
Bore size (mm) Standard stroke (mm) Max. stroke (mm) Available stroke (mm) Min. stroke (mm)φ 32
25/50/75/100150/200/250300/350/400
450/500
600
700
1
φ 40 800φ 50 1200φ 63 1200φ 80 700 1400φ 100 800 1500
Note 1: Custom stroke is available per mm.Note 2: If the max. stroke is exceeded, product specifications may not be met, depending on operating conditions. Contact CKD in this case.Note 3: As for the type with bellows, the available stroke is 500 mm for φ 32 to φ 40 bore size, 600 mm for φ 50 to φ 63, and 800 mm for φ 80 to φ 100.Note4: Any of variation G2, G3 doesn't have bore size φ 32.
Descriptions SCGBore size mm φ 32 φ 40 φ 50 φ 63 φ 80 φ 100Actuation Double actingWorking fluid Compressed airMax. working pressure MPa 1.0Min. working pressure MPa 0.05Proof pressure MPa 1.6Ambient temperature °C -10 to 60 (no freezing)Port size Rc1/8 Rc1/4 Rc3/8 Rc1/2Stroke tolerance mm
Rubber cushion (to 1000) , (1001 to 1500)Air cushion ( to 360) , (361 to 1000) , (1001 to 1500)
Working piston speed mm/s 30 to 1000 (Operate under the max. absorbed energy.)Cushion Either air cushion or rubber cushion can be selected.Effective air cushion length mm 8.6 8.6 13.4 13.4 15.4 15.4Lubrication Not requiredMax. energy absorption J
Rubber cushion 0.5 0.9 1.6 1.6 3.3 5.8Air cushion 2.5 3.7 8.0 14.4 25.4 45.6
Note 1: Described in above is specification of double acting/single rod.Each description varies depending on variation. Refer to Pneumatic Cylinders I (CB-029SA) for details.
+1.80
+1.40
+1.00
+1.80
+1.40
Variation: M
Variation: blank, G, G2, G3
Bore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm)φ 32 25/50/75/100
150/200/250300/350/400
450/500
600 1φ 40φ 50φ 63
Note 1: Custom stroke is available per mm.Note 2: If the max. stroke is exceeded, product specifications may not be met, depending on operating conditions. Contact CKD in this case.
Variation: BBore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm)
φ 3225/50/75/100150/200/250300/350/400
450/500
6001
φ 40φ 50φ 63φ 80 700φ 100 800
Note 1: Custom stroke is available per mm.Note 2: If the max. stroke is exceeded, product specifications may not be met, depending on operating conditions. Contact CKD in this case.Note 3: As for the type with bellows, the available stroke is 500 mm for φ 32 to φ 40 bore size, 600 mm for φ 50 to φ 63, and 800 mm for φ 80 to φ 100.
Pneumatic Cylinders ICatalog No. CB-029SA
21
FP1
FP2
SCG-FP1 SeriesHow to order
Note 1: Mounting bracket will be shipped with the product. (If the product is trunnion (TA, TB or TC) with bellows and the mounting bracket is LB or FA, it will be included with the product.)
Note 2: Both sides rubber cushioned cannot be selected for variations G2 and G3.
Note 3: Refer to Pneumatic Cylinders I (CB-029SA) for min. stroke of switch.
Note 4: When selecting TA or TB as mounting style, the switch quantity is limited to "H" 1 (on head end) for TA, and "R" 1 (on rod end) for TB.
Note 5: The instantaneous max. temperature is that at which sparks, swarf, etc., instantaneously contact bellows.
Note 6: Option M cannot be selected, when either of variation M, G2, or G3 is selected.
Note 7: Option J cannot be selected, when either of variation G, G2, or G3 is selected.
Note 8: "I" and "Y" cannot be selected simultaneously.
J
JDBM 40 T2H100LB FP1
BM 40 100LB FP1SCG
Note on model No. selection
Model No.: Tie rod cylinder, grade grease specifications for foodA Variation : Double acting/non-rotation B Mounting style : Axial foot C Bore size : φ 40 mmD Port thread type : Rc threadE Cushion : Both sides air cushionedF Stroke : 100 mmG Switch model No. : Proximity T2H switch, lead wire 1 mH Switch quantity : 2I Option : Bellows, max. ambient temperature 60°C,
instantaneous max. temperature 100°CJ Accessory : Rod eye
SCG-M-LB-40B-100-T2H-D-JFP1I[Example of model No.]
SCGModel No.
With switch
Without switch
How to order
B
C
A
D
E
G
H
I
Bore size
Variation
Port thread type
Cushion Note 2
F Stroke
Switch model No.
Switch quantityNote 4
OptionNote 5Note 6Note 7
I
ICode DescriptionsA Variation
Bore size 32 40 50 63 80 100Blank Double acting/single rod
D Double acting/double rod M Double acting/non-rotation G Double acting/rubber scraper
G2 Double acting/coolant proof (packing seal material NBR)G3 Double acting/coolant proof (packing seal material FKM)
B Mounting style00 Basic LB Axial foot FA Rod end flange FB Head end flange CA Eye bracket CB Clevis bracket (pin and split pin included)TA Rod end trunnion TB Head end trunnion TC Center trunnion
C Bore size (mm)32 φ 3240 φ 4050 φ 5063 φ 6380 φ 80100 φ 100
D Port thread typeBlank Rc thread
N NPT thread (custom order product)G G thread (custom order product)
E CushionB Both sides air cushionedD Both sides rubber cushioned
Note: The rubber cushion is longer in total length than the air cushion.F Stroke (mm)
Refer to the stroke table on page 21.
G Switch model No.Refer to the switch model No. on the next page.
H Switch quantityR 1 (on rod end)H 1 (on head end)D 2T 3
I OptionMax. ambient temperature
Instantaneous ambient temperature
J Bellows 60°C 100°CM Piston rod material (stainless steel)
J AccessoryI Rod eyeY Rod clevis (pin and split pin included)
B1 Eye bracketB2 Clevis bracket (pin and split pin included)B3 Eye bracketB4 Trunnion No. 2 bracket (2 pcs./set)
Accessory Note 8I
Mounting styleNote 1
22
SCG-FP1 Series
Note 1: Specify the flange (FA) with bellows as "SCG-FA-(bore size)-J".Note 2: The foot mounting bracket (LB) is provided as 2 pcs./set.Note 3: All mounting brackets are supplied with mounting bolts.
How to order mounting bracket
Switch model No. Variation: blank, D, M, G
Variation: G2, G3
Bore size (mm) φ 32 φ 40 φ 50 φ 63 φ 80 φ 100Mounting bracketFoot (LB) SCG-LB-32 SCG-LB-40 SCG-LB-50 SCG-LB-63 SCG-LB-80 SCG-LB-100Flange (FA) (FB) Note 1 SCG-FA-32 SCG-FA-40 SCG-FA-50 SCG-FA-63 SCG-FA-80 SCG-FA-100Eye bracket (CA) SCG-CA-32-FP1 SCG-CA-40-FP1 SCG-CA-50-FP1 SCG-CA-63-FP1 SCG-CA-80-FP1 SCG-CA-100-FP1Clevis bracket (CB) SCG-CB-32-FP1 SCG-CB-40-FP1 SCG-CB-50-FP1 SCG-CB-63-FP1 SCG-CB-80-FP1 SCG-CB-100-FP1
Switch model No.Lead wireStraight
Lead wireL-shaped Co
ntac
t
VoltageDisplay Lead wire
AC DCT0H* T0V*
Ree
d 1 color display2 lineT5H* T5V* No indicator lamp
T8H* T8V* 1 color display T1H* T1V*
Pro
xim
ity1 color display
2 lineT2H* T2V*T3H* T3V*
3 lineT3PH* T3PV* 1 color display (custom)T2WH* T2WV*
2 color display2 line
T2YH* T2YV*T3WH* T3WV*
3 lineT3YH* T3YV*T2YD* - 2 color display
AC magnetic field 2 lineT2YDT* -T2JH* T2JV* 1 color display off-delay 2 line
* Lead wireBlank 1 m (standard)
3 3 m (option)5 5 m (option)
Switch model No.Lead wireStraight
Lead wireL-shaped Co
ntac
t VoltageDisplay Lead wire
AC DCT2YLH* T2YLV*
Prox
imity
2 color display2 line
T3YLH* T3YLV* 3 line* Lead wire
Blank 1 m (standard)3 3 m (option)5 5 m (option)
23
FP1
FP2
M E M OM E M O
24
NSF H1Medium bore size cylinder
SCA2-FP1 Series Bore size: φ 40/φ 50/φ 63/φ 80/φ 100
Bore size (mm) Standard stroke (mm) Max. stroke (mm) Available stroke (mm) Min. stroke (mm)φ 40
25/50/75/100/ 150/200/250/ 300/350/400/450/500
6001600
1φ 50 2000φ 63
2500 Note 3
φ 80 700φ 100 800
Bore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm)φ 40
25/50/75/100/150/200/250/300/350/400/450/500
60025
φ 50φ 63φ 80 700φ 100 800
Bore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm)φ 40
25/50/75/100/150/200/250/300/350/400/450/500
600 2
(Total stroke)
φ 50φ 63φ 80 700φ 100 800
Bore size (mm) Standard stroke (mm) Max. stroke (mm) Available stroke (mm) Min. stroke (mm)φ 40
25/50/75/100/150/200/250/300/350/400/450/500
600800 1
φ 50φ 63φ 80 700φ 100 800
Bore size (mm) Standard stroke (mm) Max. stroke (mm) Available stroke (mm) Min. stroke (mm)φ 40
25/50/75/100/150/200/250/300/350/400/450/500
6001600
1φ 50
1900φ 63φ 80 700φ 100 800
Bore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm)φ 40
25/50/75/100/150/200/250/300/350/400/450/500
6001
(the same in cylinder 1 and
cylinder 2)
φ 50φ 63φ 80 700φ 100 800
Note 1: Custom stroke is available per mm.Note 2: If max. stroke is exceeded, product specifications
may not be satisfied depending on the conditions. Refer to Pneumatic Cylinders I (CB-029SA).
Note 3: The max. stroke available for φ 63 to φ 100 bore size models with bellows is 2000 mm.
Variation: blank, G, G2, G3
Variation: P, R Variation: W
Variation: D Variation: K
Variation: B
Stroke
SpecificationsDescriptions SCA2Bore size mm φ 40 φ 50 φ 63 φ 80 φ 100Actuation Double actingWorking fluid Compressed airMax. working pressure MPa 1.0Min. working pressure MPa 0.05Proof pressure MPa 1.6Ambient temperature °C -10 to 60 (no freezing)Port size Rc1/4 Rc3/8 Rc1/2Stroke tolerance mm ( to 360) , ( to 800)Working piston speed mm/s 50 to 1000 (Operate under the max. absorbed energy)Cushion Air cushionEffective air cushion length mm 14.6 16.6 16.6 20.6 23.6Lubrication Not requiredMax.energy absorption J
Cushioned 4.29 8.37 15.8 27.9 49.8
No cushion
0.067 0.079 0.079 0.201 0.301Without any cushion, this product cannot absorb large energy generated by external load. We recommend to use an external shock absorber.
+ 0.90
+ 1.40
Note 1: Custom stroke is available per mm. Note 1: Custom stroke is available per mm.
Note 1: Custom stroke is available per mm.
Note 1: Custom stroke is available per mm.Note 2: If max. stroke is exceeded, product specifications may not be satisfied
depending on the conditions. Refer to Pneumatic Cylinders I (CB-029SA).
Note 1: Custom stroke is available per mm.Note 2: If max. stroke is exceeded, product specifications may not be satisfied
depending on the conditions. Refer to Pneumatic Cylinders I (CB-029SA).
Note 1: Described in above is specification of double acting/single rod. Each description varies depending on variation. Refer to Pneumatic Cylinders I (CB-029SA) for details.
Pneumatic Cylinders ICatalog No. CB-029SA
25
FP1
FP2
SCA2-FP1 SeriesHow to order
Variation: W
Variation: K
Note 1: CA or CB cannot be selected, when either of variation D is selected.
Note 2: Mounting bracket will be shipped with the product. (For trunnion, it will be preassembled before shipment.)
Note 3: If the stroke exceeds the max. stroke, refer to Pneumatic Cylinders I (CB-029SA).
Note 4: The max. stroke available for φ 63 to φ 100 bore size models with bellows is 2000 mm.
Note 5: Switches are shipped with the product.Note 6: Refer to Pneumatic Cylinders I (CB-029SA) for min. stroke
with switch.Note 7: When selecting TA or TB as mounting style, the switch
quantity is limited to "H" (1 (on head end)) for TA, and "R" (1 (on rod end)) for TB.
Note 8: Switch cannot be built in for variation symbol K.Note 9: The instantaneous max. temperature is that at which sparks,
swarf, etc., instantaneously contact bellows.Note 10: "I" and "Y" cannot be selected simultaneously.Note 11: Refer to Pneumatic Cylinders I (CB-029SA) for custom
specifications of rod end form.Note 12: Refer to Pneumatic Cylinders I (CB-029SA) for combination
of variations/options.
Model No.: Medium bore size cylinder, grade grease specifications for foodA Variation : Double acting/double rod B Mounting style : Axial foot C Bore size : φ 40 mmD Port thread type : Rc threadE Cushion : Both sides cushionedF Stroke : 100 mmG Switch model No. : Reed T0H switch, lead wire 1 mH Switch quantity : 1 (on rod end)I Option : Cushion needle position SJ Accessory : Rod eye
SCA2-D-LB-40B-100-T0H-R-SFP1I[Example of model No.]
With switch
Without switch
How to order
BD ISSCA2 10040LB FP1
BDSCA2 10040LB FP1 ISRT0H
Code DescriptionsVariation
Blank Double acting/single rod D Double acting/double rod K Double acting/steel tube G Double acting/rubber scraper G2 Double acting/coolant proof (packing seal material NBR)G3 Double acting/coolant proof (packing seal material FKM)
Mounting style00 Basic LB Axial foot FA Rod end flange FB Head end flange FC Head end special flange CA Eye bracketCB Clevis bracket (pin and snap ring included)TC Center trunnion TA Rod end trunnion TB Head end trunnion TF Center supporting hole (φ 40 is not available)TD Rod end supporting hole (φ 40 is not available)TE Head end supporting hole (φ 40 is not available)
Bore size (mm)40 φ 4050 φ 5063 φ 6380 φ 80100 φ 100
Port thread typeBlank Rc thread
N NPT thread (custom order product)G G thread (custom order product)
CushionB Both sides cushionedR Rod end cushionedH Head end cushionedN No cushion
Stroke (mm)Refer to the stroke table on page 25.
Switch model No.Refer to the switch model No. table on page 29.
Switch quantityR 1 (on rod end)H 1 (on head end)D 2T 3
OptionMax. ambient temperature
Instantaneous max. temperature
J Bellows 100°C 200°CL Bellows 250°C 400°CM Piston rod material (stainless steel)
Blank Cushion needle position R (standard)S Cushion needle position ST Cushion needle position T
AccessoryI Rod eyeY Rod clevis (pin and snap ring included)
B1 Eye bracketB2 Clevis bracket (pin and snap ring included)B3 Eye bracketB4 Trunnion No. 2 bracket (2 pcs./set)
A
B
C
D
E
F
G
H
I
J
B
Stroke Note 3Note 4
F
AccessoryNote 10
J
Bore sizeC
Port thread typeD
CushionE
Switch model No.Note 5
G
OptionNote 9
I
Note on model No. selection
Switch quantityNote 7
H
Mounting styleNote 1, Note 2
26
SCA2-FP1 Series
With switch
Without switch
How to order
T0H IR SBP 100 FP12540LBSCA2
C Bore size
A Variation
D Port thread type
H Switch model No.Note 4
E Cushion
B
F
I
J
K
G
Switch quantityNote 5
OptionNote 6
Accessory Note 7
Note 1: Mounting bracket will be shipped with the product. (For axial foot, head end flange and trunnion, it will be preassembled before shipment.)
Note 2: If the stroke exceeds the max. stroke, refer to Pneumatic Cylinders I (CB-029SA).
Note 3: Refer to Pneumatic Cylinders I (CB-029SA) for min. stroke with switch.
Note 4: Switches are shipped with the product.Note 5: When selecting TA or TB as mounting style, the switch
quantity is limited to "H" (1 (on head end)) for TA, and "R" (1 (on rod end)) for TB.
Note 6: The instantaneous max. temperature is that at which sparks, swarf, etc., instantaneously contact bellows.
Note 7: "I" and "Y" cannot be selected simultaneously.Note 8: Refer to Pneumatic Cylinders I (CB-029SA) for custom
specifications of rod end form.Note 9: Refer to Pneumatic Cylinders I (CB-029SA) for combination
of variations/options.
SCA2-P-LB-40B-100-25-T0H-R-SFP1I[Example of model No.]
Model No.: Medium bore size cylinder, grade grease specifications for foodA Variation : Double acting/stroke adjustable (push)B Mounting style : Axial foot C Bore size : φ 40 mmD Port thread type : Rc threadE Cushion : Both sides cushionedF Stroke : 100 mmG Adjustable stroke range : 25 mmH Switch model No. : Reed T0H switch, lead wire 1 mI Switch quantity : 1 (on rod end)J Option : Cushion needle position SK Accessory : Rod eye
Code DescriptionsVariationP Double acting/stroke adjustable (push)R Double acting/stroke adjustable (pull)
Mounting style00 BasicLB Axial footFA Rod end flangeFB Head end flangeTC Center trunnionTA Rod end trunnionTB Head end trunnionTF Center supporting hole (φ 40 is not available)TD Rod end supporting hole (φ 40 is not available)TE Head end supporting hole (φ 40 is not available)
Bore size (mm)40 φ 4050 φ 5063 φ 6380 φ 80100 φ 100
Port thread typeBlank Rc thread
N NPT thread (custom order product)G G thread (custom order product)
CushionB Both sides cushionedR Rod end cushionedH Head end cushionedN No cushion
Stroke (mm)Refer to the stroke table on page 25.
Adjustable stroke range (mm)25, 50, 75, 100
Switch model No.Refer to the switch model No. on page 29.
Switch quantityR 1 (on rod end)H 1 (on head end)D 2T 3
OptionMax. ambient temperature
Instantaneous max. temperature
J Bellows 100°C 200°CL Bellows 250°C 400°CM Piston rod material (stainless steel)
Blank Cushion needle position R (standard)S Cushion needle position ST Cushion needle position T
AccessoryI Rod eyeY Rod clevis (pin and snap ring included)
B4 Trunnion No. 2 bracket (2 pcs./set)
A
B
C
D
E
F
G
H
I
J
K
40LBSCA2 SBP 100 FP125 I
Note on model No. selection
Mounting style Note 1
Stroke Note 2
Stroke Adjusting range
27
FP1
FP2
Note 1: Mounting bracket will be shipped with the product.(For trunnion, it will be preassembled before shipment.)
Note 2: Mounting styles CA and CB cannot be selected for variation B.
Note 3: If the stroke exceeds the max. stroke, refer to Pneumatic Cylinders I (CB-029SA).
Note 4: Value at S1=S2 cannot be selected for variation W.
Note 5: Refer to Pneumatic Cylinders I (CB-029SA) for min. stroke with switch.
Note 6: Switches are shipped with the product.Note 7: When selecting TA or TB as mounting style,
the switch quantity is limited to "H" (1 (on head end)) for TA, and "R" (1 (on rod end)) for TB.
Note 8: The instantaneous max. temperature is that at which sparks, swarf, etc., instantaneously contact bellows.
Note 9: Accessories B1, B2, or B3 cannot be selected for variation B.
Note 10: Refer to Pneumatic Cylinders I (CB-029SA) for custom specifications of rod end form.
Note 11: Refer to Pneumatic Cylinders I (CB-029SA) for combination of variations/options.
Model No.: Medium bore size cylinder, grade grease specifications for foodA Variation : Double acting, back to back B Mounting style : Axial foot C Bore size : φ 40 mmD Port thread type : Rc threadE Cushion : Both sides cushionedF Stroke S1 : 100 mmG Switch model No. : Reed T0H switch, lead wire 1mH Switch quantity : 2D Port thread type : Rc threadE Cushion : Both sides cushionedF Stroke S2 : 50 mmG Switch model No. : Reed T0H switch,
lead wire 1 mH Switch quantity : 1 (on rod end)I Option : Cushion needle position SJ Accessory : Rod eye
SCA2-B-LB-40-B100-T0H-D-B50-T0H-R-SFP1I[Example of model No.]
AccessoryNote 9
With switch
Without switch
How to order
Note on model No. selection
Variation
B
Bore sizeC
A
Port thread typeD D Port thread type
CushionECushionE
F Stroke Note 3, Note 4, Note 5 F Stroke
G Switch model No.Note 6
G Switch model No.
Switch quantityNote 7
H
I OptionNote 8
J
SCA2-FP1 SeriesHow to order
Code DescriptionsVariation
B Double acting/back to back W Double acting/two stage
Mounting style00 Basic LB Axial foot FA Rod end flange FB Head end flange FC Head end special flange CA Eye bracket CB Clevis bracket (pin and snap ring included)TA Rod end trunnion TB Head end trunnion TD Rod end supporting hole (φ 40 is not available)TE Head end supporting hole (φ 40 is not available)
Bore size (mm)40 φ 4050 φ 5063 φ 6380 φ 80100 φ 100
Port thread typeBlank Rc thread
N NPT thread (custom order product)G G thread (custom order product)
CushionB Both sides cushionedR Rod end cushionedH Head end cushionedN No cushion
Stroke (mm)Bore size
B W (Note 3)S1 S2 S1 S2
φ 401 to 600 1 to 600
2 to 600 1 to 200φ 50φ 63φ 80 1 to 700 1 to 700φ 100 1 to 800 1 to 800
Switch model No.Refer to the switch model No. on the next page.
Switch quantityR 1 (on rod end)H 1 (on head end)D 2T 3
OptionMax. ambient temperature
Instantaneous max. temperature
J Bellows 100°C 200°CL Bellows 250°C 400°CM Piston rod material (stainless steel)
Blank Cushion needle position R (standard)S Cushion needle position ST Cushion needle position T
AccessoryI Rod eyeY Rod clevis (pin and snap ring included)
B1 Eye bracketB2 Clevis bracket (pin and snap ring included)B3 Eye bracketB4 Trunnion No. 2 bracket (2 pcs./set)
A
B
C
D
E
F
G
H
I
J
BB
BB S40LB FP1
5010040LB FP1B SSCA2
T0HT0H 50100 D B RSCA2
W: 1st stage stroke B: Cylinder 2 stroke
S2S1
Cylinder 2Cylinder 1
W: Total stroke B: Cylinder 1 stroke
I
I
Cylinder 1
Cylinder 2
Mounting styleNote 1Note 2
B: Cylinder 2Cylinder 1
W: Cylinder 2Cylinder 1
28
Note 1: Refer to Pneumatic Cylinders I (No.CB-029SA) for material of mounting bracket.Note 2: Foot mounting bracket is provided as 2 pcs./set.Note 3: All mounting brackets are supplied with mounting bolts.Note 4 : Dimension of eye bracket (CA), clevis bracket (CB) is same as standard products.
How to order mounting bracketBore s ize (mm) φ 40 φ 50 φ 63 φ 80 φ 100Mounting bracketFoot (LB) Note 2 S1-LB-40 S1-LB-50 S1-LB-63 S1-LB-80 S1-LB-100Flange (FA/FB) S1-FA-40 S1-FA-50 S1-FA-63 S1-FA-80 S1-FA-100Eye bracket (CA) S1-CA-40-FP1 S1-CA-50-FP1 S1-CA-63-FP1 S1-CA-80-FP1 S1-CA-100-FP1Clevis bracket (CB) S1-CB-40-FP1 S1-CB-50-FP1 S1-CB-63-FP1 S1-CB-80-FP1 S1-CB-100-FP1
Switch model No. Variation: Blank, D, G, P, R, B, W
Variation: G2, G3
Switch model No.Lead wire straight
Lead wire L-shaped Co
ntac
t
VoltageDisplay Lead wire
AC DCT0H* T0V*
Ree
d 1 color display 2 lineT5H* T5V* No indicator lamp
T8H* T8V* 1 color display T1H* T1V*
Pro
xim
ity1 color display
2 lineT2H* T2V*T3H* T3V* 3 line
T2WH* T2WV*
2 color display 2 line
T2YH* T2YV*T3WH* T3WV*
3 lineT3YH* T3YV*T3PH* T3PV* 1 color display (custom) 3 lineT2YD* - 2 color display
AC magnetic field 2 lineT2YDT* -T2JH* T2JV* 1 color display off-delay 2 line
* Lead wireBlank 1 m (standard)
3 3 m (option)5 5 m (option)
Switch model No.Lead wire straight
Lead wire L-shaped Co
ntac
t
VoltageDisplay Lead wire
AC DCT2YLH* T2YLV*
Prox
imity
2 color display2 line
T3YLH* T3YLV* 3 line* Lead wire
Blank 1 m (standard)3 3 m (option)5 5 m (option)
SCA2-FP1 Series
29
FP1
FP2
M E M OM E M O
30
NSF H1
Descriptions SCS2-Bore size mm φ 125 φ 140 φ 160 φ 180 φ 200 φ 250Actuation Double actingWorking fluid Compressed airMax. working pressure MPa 1.0Min. working pressure MPa 0.05Proof pressure MPa 1.6Ambient temperature °C -5 to 60 (no freezing)Port size Rc1/2 Rc3/4 Rc1Stroke tolerance mm ( to 300) , ( to 1000) , ( to 1200)Working piston speed mm/s 20 to 1000 (Operate under the max. absorbed energy.)Cushion Air cushionEffective air cushion length mm 21.6 21.6 21.6 21.6 26.6 26.6Lubrication Not required
Max. energy absorption J
Cushioned 63.5 91.5 116 152 233 362
No cushion
0.371 0.386 0.386 0.958 1.08 2.32Without any cushion, this product cannot absorb large energy generated by external load. We recommend to use an external shock absorber.
Medium bore size cylinder
SCS2- -FP1 Series Bore size: φ 125/φ 140/φ 160/φ 180/φ 200/φ 250
+1.00
+1.40
+1.80
Specifications
NLN
Note 1: Described in left is specification of double acting/single rod. Each description varies depending on variation. Refer to Pneumatic Cylinders I (CB-029SA) for details.
Bore size (mm) Standard stroke (mm) Max. stroke (mm) Available stroke (mm) Min. stroke (mm) Trunnion min. stroke (mm)φ 125
50/75/100150/200250/300
800
2000 1
23φ 140 25φ 160 27φ 180 900 28φ 200 1,000 28φ 250 1,200 28
Note 1: Custom stroke is available per mm.Note 2: If the max. stroke is exceeded, product specifications may not be met, depending on operating conditions. Contact CKD in this case.
Variation: DBore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) Trunnion min. stroke (mm)
φ 125
50/75/100150/200250/300
800
1
23φ 140 25φ 160 27φ 180 900 28φ 200 1,000 28φ 250 1,200 28
Note 1: Custom stroke is available per mm.Note 2: If the max. stroke is exceeded, product specifications may not be met, depending on operating conditions. Contact CKD in this case.
Variation: blank, GStroke
NLN
Pneumatic Cylinders ICatalog No. CB-029SA
31
FP1
FP2
Model No.
Bore sizeC
VariationA
Port thread typeD
CushionE
Stroke F
Switch model No.G
Switch quantityNote 4
H
OptionNote 5
I
AccessoryI Rod eyeY Rod clevis (pin and snap ring included)
B1 Eye bracketB2 Clevis bracket (pin and snap ring included)
J
Note 6
SCS2- -FP1 SeriesSpecifications
NLN
Code DescriptionsVariation
Blank Double acting/single rodD Double acting/double rodG Double acting/rubber scraper
Mounting style00 BasicLB Axial footFA Rod end flangeFB Head end flangeCA Eye bracketCB Clevis bracket (pin and snap ring included)TC Center trunnion TA Rod end trunnion TB Head end trunnionTF Center supporting hole (custom order product)TD Rod end trunnion (custom order product)TE Head end trunnion (custom order product)Bore size (mm)
125 φ 125140 φ 140160 φ 160180 φ 180200 φ 200250 φ 250Port thread type
Blank Rc threadN NPT thread (custom order product)G G thread (custom order product)CushionB Both sides cushionedR Rod end cushionedH Head end cushionedN No cushionStroke (mm)
Refer to the stroke table on page 31.
Switch quantityR 1 (on rod end)H 1 (on head end)D 2T 34 4Option
C2 Cushion section check valve
Bellows
Max. ambient temperature
Instantaneous max. temperature
J 60°C 100°CK Bellows 100°C 200°CL Bellows 250°C 400°CM Piston rod material (stainless steel)
Blank Cushion needle position (standard)R Cushion needle position RS Cushion needle position ST Cushion needle position T
A
B
C
D
E
F
Switch model No.Refer to the switch model No. on the next page.G
H
I
50BG J125LB FP1
50 T0HBG R J125LB FP1SCS2-LN
SCS2-N Y
Y
AccessoryNote 7
J
Mounting styleNote 1, Note 2
B
Note 1: Hole type trunnion is available as custom order for φ 125 to 160 only. Contact CKD for dimensions and other details.
Note 2: Mounting styles CA and CB cannot be selected for variation D.
Note 3: Refer to Pneumatic Cylinders I (CB-029SA) for min. stroke with switch.
Note 4: When selecting TA or TB as mounting style, the switch quantity is limited to "H" 1 (on head end) for TA, and "R" 1 (on rod end) for TB.
Note 5: The instantaneous max. temperature is that at which sparks, swarf, etc., instantaneously contact bellows.
Note 6 : Check the figures below for the cushion needle position indication.
Note 7: "I" a nd "Y" cannot be selected simultaneously.
Non-lubrication type without switch
Model No.: Medium bore size cylinder/double acting/no lubrication type/grade grease specifications for food with switch
A Variation : Double acting/rubber scraperB Mounting style : Axial footC Bore size : φ 125 mmD Port thread type : Rc threadE Cushion : Both sides cushionedF Stroke : 50 mmG Switch model No. : Reed T0H switch, lead wire 1 mH Switch quantity : 1 (on rod end)I Option : Bellows, max. ambient temperature 60°C, instantaneous
max. temperature 100°CJ Accessory : Rod clevis
SCS2-LNG-LB-125B-50-T0H-R-JFP1Y[Example of model No.]
Non-lubrication type with switch
How to order
Note on model No. selection
R
S
Standard
T
32
Switch model No.Lead wire straight
Lead wire L-shaped Co
ntact Voltage
Display Lead wireAC DC
T0H* T0V*
Ree
d 1 color display2 lineT5H* T5V* No indicator lamp
T8H* T8V* 1 color displayT1H* T1V*
Pro
xim
ity
1 color display2 line
T2H* T2V*T3H* T3V*
3 lineT2WH* T2WV* 1 color display (PNP output) (custom)T2YH* T2YV*
2 color display2 line
T3WH* T3WV*T3YH* T3YV*
3 lineT3PH* T3PV*T2YD* - 2 color display
AC magnetic field 2 lineT2YDT* -T2JH* T2JV* 1 color display off-delay 2 line
* Lead wireBlank 1 m (standard)
3 3 m (option)5 5 m (option)
SCS2- -FP1 SeriesN
LN
33
FP1
FP2
M E M OM E M O
34
NSF H1Compact cylinder
SSD2-FP1 Series Bore size: φ 12/φ 16/φ 20/φ 25/φ 32/φ 40/
φ 50/φ 63/φ 80/φ 100
SpecificationsDescriptions SSD2
Bore size mm φ 12 φ 16 φ 20 φ 25 φ 32 φ 40 φ 50 φ 63 φ 80 φ 100Actuation Double actingWorking fluid Compressed airMax. working pressure MPa 1.0Min. working pressure MPa 0.1 0.05Proof pressure MPa 1.6Ambient temperature °C -10 to 60 (no freezing)Port size M5 Rc1/8 Note 1 Rc1/4 Rc3/8Stroke tolerance mm
Rubber cushion +2.00
No cushion +1.00
Working piston speed mm/s 50 to 500 50 to 300Cushion With or without cushion can be selectedLubrication Not requiredMax. absorbed Rubber cushion 0.03 0.05 0.10 0.16 0.16 0.44 0.75 0.78 2.51 3.92Energy J No cushion 0.004 0.01 0.016 0.021 0.025 0.092 0.1 0.12 0.27 0.56Note 1: The port size of 5 mm stroke of φ 32 without switch is M5.Note 2: Described in above is specification of double acting/single rod.
Each description varies depending on variation. Refer to Pneumatic Cylinders I (CB-029SA) for details.
Stroke Variation: Blank, L, K, KL
Bore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm)φ 12 5/10/15/20
25/30 30
1
φ 16φ 20 5/10/15/20/25
30/35/40/45/50 50φ 25φ 32 5/10/15/20/25/30/
35/40/45/50/75/100
100
φ 40φ 50
10/15/20/2530/35/40/45/50
75/100
φ 63φ 80φ 100
Note 1: When using the type with switch, refer to the table of the min. stroke with switch on Pneumatic Cylinders I (CB-029SA).
Note 2: If the stroke exceeds the max. stroke, refer to the long stroke on Pneumatic Cylinders I (CB-029SA).
Variation: D, DLBore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm)
φ 12 5/10/15/2025/30 30
5
φ 16φ 20 5/10/15/20/25
30/35/40/45/50 50φ 25φ 32 5/10/15/20/25/30/
35/40/45/50/75/100
100
φ 40φ 50
10/15/20/2530/35/40/45/50
75/10010
φ 63φ 80
φ 100
Variation: G2, G2L, G3, G3LBore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm)
φ 16 5/10/15/20/25/30 30
1 (10)The value in ( ) is for types with one or 2 switches.
φ 20 5/10/15/20/2530/35/40/45/50 50
φ 25φ 32 5/10/15/20/25/30/
35/40/45/50/75/100 100φ 40φ 50
10/15/20/2530/35/40/45/50
75/100100
φ 63φ 80φ 100
Variation: M, MLBore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm)
φ 12 5/10/15/2025/30 30
1
φ 16φ 20 5/10/15/20/25
30/35/40/45/50 50φ 25φ 32 5/10/15/20/25/30/
35/40/45/50/75/100100
φ 40φ 50 5/10/15/20/25/30/
35/40/45/50/75/100φ 63Note 1: When using the type with switch, refer to the table of the min. stroke
with switch on Pneumatic Cylinders I (CB-029SA).
Variation: G, GL, G5, G5LBore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm)
φ 20 5/10/15/20/2530/35/40/45/50 50
1
φ 25φ 32 5/10/15/20/25/30/
35/40/45/50/75/100
100
φ 40φ 50
10/15/20/2530/35/40/45/50
75/100
φ 63φ 80φ 100
Note 1: When using the type with switch, refer to the table of the min. stroke with switch on Pneumatic Cylinders I (CB-029SA).
Variation: X, XL, Y, YLBore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm)
φ 12
5, 10 10 5
φ 16φ 20φ 25φ 32φ 40φ 50 10, 20 20 10
Note: When using the type with switch, refer to the table on the right.
NSF H1
Pneumatic Cylinders ICatalog No. CB-029SA
35
FP1
FP2
SSD2-FP1 SeriesHow to order
VariationA
AccessoryNote 7
J
OptionNote 4
H
Note 1Note 2Note 3Note 8Note 9
Switch model No.F
StrokeE
CushionD
With switch
Note on model No. selectionNote 1: The T2YD* switch cannot be mounted on φ 12 and
φ 16 units.Note 2: The T8* switch cannot be mounted on φ 12 to φ 32
units.Note 3: F switch is available only for the φ 20 or φ 25 piping
port surface.Note 4: Piston rod of φ 12 to φ 25 is stainless steel as
standard. C type snap ring is stainless steel instead of steel.Nut of the male thread rod end is stainless steel.
Note 5: The mounting bracket is included at shipping.Note 6: When selecting LB or FA, the projection dimensions
of piston rod WF is different from that of the standard. Refer to Pneumatic Cylinders I (No.CB-029SA) for dimensions. No. of the specified projection dimension will be added to the end of the model No. printed on the nameplate of the body.
Note 7: " I" and "Y" cannot be selected simultaneously.Note 8: Less than 15 mm stroke is not available for φ 20
with F switch of radial lead wire.Note 9: Switches are shipped with the product. Contact
CKD assembly when shipping is required.Note 10: Refer to Pneumatic Cylinders I (CB-029SA) for
combination of variations/options.
[Example of model No.] SSD2-KL-12-10-T0H-R-NFP1-LB-IModel: Compact cylinder, grade grease
specifications for foodA Variation : Double acting/high load/
switchB Bore size : φ 12 mmC Port thread type : Rc threadD Cushion : No cushionE Stroke : 10 mmF Switch model No. : Reed T0H switch/lead wire
1 mG Switch quantity : 1 (on rod end)H Option : Rod end male threadI Mounting bracket : Axial footJ Accessory : Rod eye
How to orderWithout switch
12 FP1K N5SSD2 LB I
12 FP1KL R10 NSSD2 T0H ILB
I Mounting bracketNote 5Note 6
Port thread type
C
Code Descriptions
Variation Bore size12 16 20 25 32 40 50 63 80 100
Blank Double acting/single rodL Double acting/single rod/switchK Double acting/high load
KL Double acting/high load/switchX Double acting/push
XL Double acting/push/switchY Double acting/pull
YL Double acting/pull/switchD Double acting/double rod
DL Double acting/double rod/switchM Double acting/non-rotation
ML Double acting/non-rotation/switchG Double acting/rubber scraper
GL Double acting/rubber scraper/switch
G2 Double acting/coolant proof scraper (packing seal material NBR)
G2L Double acting/coolant proof scraper (packing seal material NBR)/switch
G3 Double acting/coolant proof scraper (packing seal material FKM)
G3L Double acting/coolant proof scraper (packing seal material FKM)/switch
G5 Double acting/environment-resistant scraper
G5L Double acting/environmentally-resistant scraper/switch
Bore size (mm)12 φ 1216 φ 1620 φ 2025 φ 2532 φ 3240 φ 4050 φ 5063 φ 6380 φ 80
100 φ 100
Port thread typeBlank Rc thread
NN NPT thread (≥ φ 32) (custom order product)GN G thread (≥ φ 32) (custom order product)
CushionBlank No cushion
D Rubber cushion
Stroke (mm)Refer to the stroke table on page 35.
Switch quantityR 1 (on rod end)H 1 (on head end)D 2
OptionBore size (mm) 12 16 20 25 32 40 50 63 80 100
Blank Rod end female threadN Rod end male thread
M Note 4 Piston rod material (stainless steel)S Dedicated body for custom stroke
Mounting bracketBlank No mounting bracket
LB Axial footCB Clevis bracket (pin and snap ring included)FA Rod end flange FB Head end flange
Accessory (available when the rod end male thread "N" is selected)I Rod eyeY Rod clevis (pin and snap ring included)
B
A
D
C
Switch model No.Refer to the switch model No. on the next page.
I
J
H
E
G
F
Switch quantityGBore sizeB
36
SSD2-FP1 Series
Switch model No. Variation: L, KL, XL, YL, DL, ML, GL, G5L
Switch model No.Lead wire straight
Lead wire L-shaped Co
ntact Voltage Display Lead
wireBore size
AC DC 12 16 20 25 32 40 50 63 80 100F2S*
Pro
xim
ity 1 color display
2 lineF3S* 3 line
F2H* F2V* 2 lineF3H* F3V* 3 line
F3PH* F3PV* 1 color display (PNP output) (custom order) 3 lineF2YH* F2YV*
2 color display 2 line
F3YH* F3YV* 3 lineT0H* T0V*
Ree
d 1 color display 2 lineT5H* T5V* No indicator lamp
T8H* T8V* 1 color display T1H* T1V*
Pro
xim
ity
1 color display2 lineT2H* T2V*
T3H* T3V*3 lineT3PH* T3PV* 1 color display (PNP output) (custom order)
T2WH* T2WV*
2 color display2 lineT2YH* T2YV*
T3WH* T3WV*3 lineT3YH* T3YV*
T2YD* - 2 color displayAC magnetic field 2 lineT2YDT* -
T2JH* T2JV* 1 color display off-delay 2 line* Lead wire
Blank 1 m (standard)3 3 m (option)5 5 m (option)
Note: 5 mm lead wire for F switch is custom order product.
Variation: G2L, G3LSwitch model No.
Lead wire straight
Lead wire L-shaped Co
ntact
Volta
ge
Display Lead wire
T2YLH* T2YLV*
Prox
imity
DC 2 color display2 line
T3YLH* T3YLV* 3 line* Lead wire
Blank 1 m (standard)3 3 m (option)5 5 m (option)
37
FP1
FP2
M E M OM E M O
38
NSF H1Compact cylinder (large bore size)
SSD2-FP1 Series Bore size: φ 125/φ 140/φ 160/φ 180/φ 200
SpecificationsDescriptions SSD2 (large bore size)
Bore size mm φ 125 φ 140 φ 160 φ 180 φ 200Actuation Double actingWorking fluid Compressed airMax. working pressure MPa 1.0 0.7Min. working pressure MPa 0.05Proof pressure MPa 1.6 1.05Ambient temperature °C -10 to 60 (no freezing)Port size Rc3/8 Rc1/2Stroke tolerance mm +2.0
0
Working piston speed mm/s 50 to 300 20 to 300Cushion Rubber cushion (standard)Lubrication Not requiredMax. absorbed Rubber cushion 6.52 6.52 7.78 12.4Energy J No cushion -Note 1: Described in above is specification of double acting/single rod.
Each description varies depending on variation. Refer to Pneumatic Cylinders I (CB-029SA) for details.
StrokeBore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm)
φ 12510, 20, 30, 40, 5075, 100, 125, 150175, 200, 250, 300
300 1φ 140φ 160φ 180φ 200
Note 1: When using the type with switch, refer to the table of Quantity of installed switches and the min. stroke.
Pneumatic Cylinders ICatalog No. CB-029SA
39
SSD2-FP1 (large bore size) SeriesHow to order
FP1
FP2
G Option
How to orderWithout switch
With switch
VariationA
Bore sizeB
Switch model No.Note 1
E
D Stroke
Port thread typeC
Note on model No. selectionNote 1: Switches are shipped with the product. Contact
CKD assembly when shipping is required.Note 2: Stroke less than 5 mm for 1 color display and
stroke less than 10 mm is not available for 2 color display, off-delay, AC magnetic field, or types with T1* or T8* switches. Refer to Pneumatic Cylinders I (CB-029SA) for Quantity of installed switches and the min. stroke.
Note 3: Special total length for custom stroke is provided when a custom stroke is used.
[Example of model No.] SSD2-L-200-100-T0H-R-NFP1Model: Compact cylinder (large bore size), grade
grease specifications for foodA Variation : Double acting, basic/switchB Bore size : 200 mmC Port thread type : Rc threadD Stroke : 100 mmE Switch model No. : Reed T0H switch/lead wire
1 mF Switch quantity : 1 (on rod end)G Option : Rod end male thread
NSSD2 200 100 FP1
R NL 200SSD2 100 T0H FP1
Switch model No.Lead wire Lead wire
Cont
act
VoltageDisplay
LeadStraight L-shaped AC DC Line
TOH* T0V*
Ree
d 1 color display2 lineT5H* T5V* No indicator lamp
T8H* T8V* 1 color displayT1H* T1V*
Pro
xim
ity
1 color display2 line
T2H* T2V*T3H* T3V*
3 lineT3PH* T3PV* 1 color display (custom)T2WH* T2WV*
2 color display2 line
T2YH* T2YV*T3WH* T3WV*
3 lineT3YH* T3YV*T2JH* T2JV* 1 color display off-delay 2 lineT2YD* - 2 color display
AC magnetic field2 line
T2YDT* -
Code DescriptionsVariationBlank Double acting/single rod
L Double acting/single rod/switchD Double acting/double rod
DL Double acting/double rod/switch
Bore size (mm)125 φ 125140 φ 140160 φ 160180 φ 180200 φ 200
Port thread typeBlank Rc thread
NN NPT thread (φ 125 to φ 160) (custom order product)GN G thread (φ 125 to φ 160) (custom order product)
Stroke (mm)
Refer to the stroke table on page 39.
* Lead wireBlank 1 m (standard)
3 3 m (option)5 5 m (option)
Switch quantityR 1 (on rod end)H 1 (on head end)D 2
OptionBlank Rod end female thread
N Rod end male thread
A
B
C
F
G
D
E
F Switch quantity
40
JIS symbol
NSF H1Guided cylinder
STG-M-FP1 Series Bore size: φ 12/φ 16/φ 20/φ 25/φ 32/φ 40
φ 50/φ 63/φ 80/φ 100
Descriptions STG-MBore size mm φ 12 φ 16 φ 20 φ 25 φ 32 φ 40 φ 50 φ 63 φ 80 φ 100Actuation Double actingWorking fluid Compressed airMax. working pressure MPa 1.0Min. working pressure MPa 0.15 0.1Proof pressure MPa 1.6Ambient temperature °C -10 to 60 (no freezing)Port size M5 Rc1/8 Rc1/4 Rc3/8
Stroke tolerance mm+2.0
0Working piston speed mm/s 50 to 500 50 to 300Cushion Rubber cushionLubrication Not requiredMax. energy absorption J 0.056 0.088 0.157 0.157 0.401 0.627 0.980 1.560 2.510 3.92Note 1: Described in above is specification of double acting/single rod.
Each description varies depending on variation. Refer to Pneumatic Cylinders I (CB-029SA) for details.
Specifications
Variation: blankBore size Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) Min. stroke/switch (mm)φ 12 10/20/30/40/50/75/100
125/150/175/200/250250
55 (10)Note 2
φ 16φ 20 20/30/40/50/75/100/125
150/175/200/250/300/350/400
400
φ 25φ 32
25/50/75/100125/150/175200/250/300
350/400
φ 40φ 50φ 63φ 80φ 100Note 1: The custom stroke is available in 5 mm increments. However, the total dimensions are the same as the longer
standard stroke.The dedicated whose dimensions are matched to the stroke is available. Contact CKD for details.Note 2: The value indicates for types with one or two switches. The value in ( ) is the min.
stroke for switches of 2 color display, AC magnetic field tolerant types.
Rubber air cushioned (*C)Bore size Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) Min. stroke/switch (mm)φ 32 25/50/75/100
125/150/175200/250/300
350/400
4005
5 (10)Note 2
φ 40φ 50φ 63 10 10
Note 1: The custom stroke is available in 5 mm increments. However, the total dimensions are the same as the longer standard stroke.
Note 2: The value indicates for types with one or two switches. The value in ( ) is the min. stroke for switches of 2 color display, AC magnetic field tolerant types.
Variation: CBore size Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) Min. stroke/switch (mm)φ 16 25/50/75/100/125/150/175/200/250 250
15Note 2
15
φ 20
25/50/75/100125/150/175200/250/300
350/400
400
φ 25φ 32φ 40φ 50φ 63
Note 1: Custom stroke is available per mm. However, the total dimensions are the same as the longer standard stroke. (Custom order)
Note 2: As the product with min. stroke or less cannot obtain the cushion effect, select the basic type.
Variation: GBore size Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) Min. stroke/switch (mm)φ 20 20/30/40/50/75/100/125
150/175/200/250/300/350/400
400 55 (10)Note 2
φ 25φ 32 25/50/75/100
125/150/175200/250/300
350/400
φ 40φ 50φ 63
Note 1: The custom stroke is available in 5 mm increments. However, the total dimensions are the same as the longer standard stroke.
Note 2: The value indicates for types with one or two switches. The value in ( ) is the min. stroke for switches of 2 color display, AC magnetic field tolerant types.
Variation: G2, G3Bore size Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) Min. stroke/switch (mm)φ 20 20/30/40/50/75/100/125
150/175/200/250/300/350/400
400 510
Note 2
φ 25φ 32 25/50/75/100
125/150/175200/250/300
350/400
φ 40φ 50φ 63
Note 1: The custom stroke is available in 5 mm increments. However, the total dimensions are the same as the longer standard stroke.
Note 2: The value indicates for types with one or two switches. Variation: G5
Bore size Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) Min. strokes/switch (mm)φ 20 20/30/40/50/75/100/125/
150/175/200/250/300/350/400
400 55 (10)Note 2
φ 25
φ 32
25/50/75/100125/150/175200/250/300
350/400
φ 40
φ 50
φ 63
φ 80
φ 100
Note 1: The custom stroke is available in 5 mm increments. However, the total dimensions are the same as the longer standard stroke.
Note 2: The value indicates for types with one or two switches. The value in ( ) is the min. stroke for switches of 2 color display, AC magnetic field tolerant types.
Stroke
Pneumatic Cylinders IICatalog No. CB-030SA
41
FP1
FP2
Model No.
With switch
Without switch
How to order
T2H2532 RM CSTG FP1
2532M CSTG FP1
Code DescriptionsBearing type
M Metal bush bearing
Bore size (mm)12 φ 1216 φ 1620 φ 2025 φ 2532 φ 3240 φ 4050 φ 5063 φ 6380 φ 80100 φ 100
Port thread type
Blank M5 (φ 12 to φ 16)Rc thread (φ 20 to φ 100)
NN NPT thread (≥ φ 20) (custom order product)GN G thread (≥ φ 20) custom order product
Stroke (mm)Refer to the stroke table on page 41.
Switch model No.Refer to the switch model No. on page 44.
Switch quantityR 1 (on rod end)H 1 (on head end)D 2T 3
Bearing typeA
VariationB
Bore sizeC
Port thread typeD
StrokeE
Switch quantity
G
Switch model No.
F
STG-MC-40-75-T0H-D-FP1[Example of model No.]
A Bearing type : Metal bush bearingB Variation : Air cushionC Bore size : φ 40 mmD Port thread type : Rc threadE Stroke : 75 mmF Switch model No. : Reed T0H switch, lead wire 1 mG Switch quantity : 2
Model No.: Guided cylinder, grade grease specifications for food
A
C
D
E
F
G
STG-M-FP1 SeriesHow to order
VariationBlank Double acting/single rod
C Double acting/air cushionedG Double acting/rubber scraper G2 Double acting/coolant proof (packing seal material NBR)G3 Double acting/coolant proof (packing seal material FKM)G5 Double acting/environment-resistant scraper
B
42
STG-M-FP1 Series
Note 1: Switches other than E switch model No. are also available. (Custom order product)Refer to Pneumatic Cylinders I (No.CB-029SA) for details.
Note 2: Switches are shipped with the product. Contact CKD when assembling before shipment is necessary.
Model No.: Guided cylinder with rubber air cushion, grade grease specifications for foodA Bearing type : Metal bush bearingB Bore size : φ 32 mmC Port thread type : Rc threadD Stroke : 50 mmE Switch model No. : Reed T0H switch, lead wire 1 mF Switch quantity : 1 (on rod end)
STG-M-32C-50-T0H-R-FP1[Example of model No.]
25
T2H25 R
32MSTG FP1
32STG FP1Model No.
With switch
Without switch
How to order
Code DescriptionsBearing type
M Metal bush bearing
Bore size (mm)32 φ 3240 φ 4050 φ 5063 φ 63
Port thread typeBlank Rc thread
N NPT thread (custom order product)G G thread (custom order product)
Stroke (mm)Refer to the stroke table on page 41.
Switch model No.Lead wire straight
Lead wire L-shaped Contact Voltage Display Lead
wireAC DCT0H* T0V*
Reed1 color display
2 lineT5H* T5V* No indicator lampT8H* T8V* 1 color displayT1H* T1V*
Proximity
1 color display2 lineT2H* T2V*
T3H* T3V* 3 lineT3PH* T3PV* 1 color display (custom) 3 lineT2WH* T2WV*
2 color display2 lineT2YH* T2YV*
T3WH* T3WV*3 lineT3YH* T3YV*
T2JH* T2JV* 1 color display off-delay 2 lineT2YD* - 2 color display
for AC magnetic field 2 lineT2YDT* -* Lead wire Blank 1 m (standard)
3 3 m (option)5 5 m (option)
Switch quantityR 1 (on rod end)H 1 (on head end)D 2T 3
M C
C
A
B
C
D
E
F
Bearing typeA
Bore sizeB
Port thread typeC
Rubber air cushioned
Stroke D
Switch model No.Note 1 Note 2
E
Note on model No. selection
Switch quantity
F
43
FP1
FP2
STG-M-FP1 SeriesSwitch model No.
Switch model No. Variation: blank, C, G, G5
Variation: G2, G3
Switch model No.Lead wire straight
Lead wire L-shaped Co
ntact Voltage
Display Lead wireAC DC
T0H* T0V*
Ree
d 1 color display2 lineT5H* T5V* No indicator lamp
T8H* T8V* 1 color displayT1H* T1V*
Pro
xim
ity1 color display
2 lineT2H* T2V*T3H* T3V* 3 line
T2WH* T2WV*
2 color display2 line
T2YH* T2YV*T3WH* T3WV*
3 lineT3YH* T3YV*T3PH* T3PV* 1 color display (custom) 3 lineT2YD* - 2 color display
AC magnetic field 2 lineT2YDT* -
* Lead wireBlank 1 m (standard)
3 3 m (option)5 5 m (option)
Note :Switches are shipped with the product. Contact CKD when assembling before shipment is necessary.
Switch model No.Lead wire straight
Lead wire L-shaped Co
ntac
t
VoltageDisplay Lead wire
AC DCT2YLH* T2YLV*
Prox
imity
2 color display2 line
T3YLH* T3YLV* 3 line* Lead wire
Blank 1 m (standard)3 3 m (option)5 5 m (option)
44
JIS symbol
NSF H1
Maximum energy absorption
* The custom stroke is available in 1 mm increments.
Note 1: For common port piping, working piston speed varies depending on stroke. Contact CKD.Note 2: ( ) indicates resin guide.Note 3: Described in above is specification of double acting basic.
Each description varies depending on variation. Refer to Pneumatic Cylinders I (CB-029SA) for details.
Stroke
SpecificationsDescriptions SRL3Bore size mm φ 12 φ 16 φ 20 φ 25 φ 32 φ 40 φ 50 φ 63 φ 80 φ 100Actuation Double actingWorking fluid Compressed airMax. working pressure MPa 0.7Min. working pressure MPa 0.2 (0.25) Note 2 0.1 (0.15) Note 2 0.05 (0.1) Note 2Proof pressure MPa 1.05Ambient temperature °C 5 to 60Port size M5 Rc1/8 Rc1/4 Rc3/8 Rc1/2Stroke tolerance mm ( to 1000) , ( to 3000) , ( to 5000)Working piston speed mm/s 50 to 2000 (standard piping) (Note 1)Cushion Air cushionLubrication Not required
Bore size(mm)
Cushioned No cushion Shock absorber (initial set value)Max. energy
absorption (J)Cushion
stroke (mm)Max. energy
absorption (J)Absorbed energy (J)
Effective stroke(mm)
φ 12 equiv. 0.03 14.5 0.003 2.4 5.5φ 16 equiv. 0.22 19.2 0.007 2.4 5.5φ 20 equiv. 0.59 22.2 0.010 5.7 7φ 25 equiv. 1.40 20.9 0.015 10 9φ 32 equiv. 2.57 23.5 0.030 18 13φ 40 equiv. 4.27 23.9 0.050 50 16.5φ 50 equiv. 9.13 24.9 0.072 86 21φ 63 equiv. 17.4 29.6 0.138 86 21φ 80 equiv. 40 45.8 0.393 143 25φ 100 equiv. 67 45.8 0.622 143 25
Bore size(mm)
Standard stroke (mm)
Max. stroke (mm)
Min. stroke (mm)
φ 12 equiv.
200/300400/500600/700800/9001000
5000 1
φ 16 equiv.φ 20 equiv.φ 25 equiv.φ 32 equiv.φ 40 equiv.φ 50 equiv.φ 63 equiv.φ 80 equiv.φ 100 equiv.
Rodless cylinder
SRL3-FP1 Series Bore size: φ 12, φ 16, φ 20, φ 25, φ 32
φ 40, φ 50, φ 63, φ 80, φ 100 equiv.
+2.5 0
+2.0 0
+3.0 0
Pneumatic Cylinders ICatalog No. CB-029SA
45
FP1
FP2
SRL3-FP1 SeriesHow to order
With switch
Without switchHow to order
00 12 BG B200 FP1SRL3
BG M0H200 FP100 12 R BSRL3
Code DescriptionsVariation
Blank Double actingG Resin guide
Mounting style00 Basic typeLB Axial foot LB1 Axial foot (φ 12 to φ 32 only)
Bore size (mm)12 φ 1216 φ 1620 φ 2025 φ 2532 φ 3240 φ 4050 φ 5063 φ 6380 φ 80100 φ 100
Port thread typeBlank Rc thread
N NPT thread (≥ φ 20) (custom order product)G G thread (≥ φ 20) (custom order product)
CushionB Both sides cushionedR R side cushionedL L side cushionedN No cushion
Stroke (mm)Bore size Stroke Note 3 Custom stroke
φ 12 to φ 100 1 to 5000 Per mmSwitch model No.
Lead wire straight
Lead wire L-shaped Co
ntact Voltage Indicator lamp Lead
wireAC DCM0H* M0V*
Reed 1 color display 2 lineM5H* M5V* No indicator lamp
M2H* M2V*P
roxi
mity
1 color display- M2WV* 2 color display 2 line
M3H* M3V* 1 color display- M3WV* 2 color display 3 line
M3PH* M3PV* 1 color display (custom) 3 lineT2WH* T2WV*
2 color display 2 lineT2YH* T2YV*
T3WH* T3WV* 3 lineT3YH* T3YV*T2YD* - 2 color display
AC magnetic field 2 lineT2YDT* -* Lead wire
Blank 1 m (standard)3 3 m (option)5 5 m (option)
Switch quantityR 1 on R sideL 1 on L sideD 2T 34 4 (when there are more than 4 switches, indicate switch quantity.)
OptionBore size (φ) 12 16 20 25 32 40 50 63 80 100
A Both-side full stroke adjustable, shock absorberA1 R-side full stroke adjustable, shock absorberA2 L-side full stroke adjustable, shock absorberA3 Full stroke adjustable/adjusting bracket to be addedY Floating fitting
Y1 Thin floating fittingL* Intermediate support bracket (for 00, LB)N* Intermediate support bracket (for LB1)C C mount bracketH Larger thread for table installationU Height adjustment plate
Blank
Por
t pos
ition
F(standard)
Cus
hion
nee
dle
posi
tion F(standard)
R R (Common port) FB F BT R (Common port) BD D FS D DX F (Common port) F
A
B
C
D
E
F
H
I
G
Mounting styleNote 1, Note 2
B
Port thread typeD
CushionE
Switch model No.Note 4
G
Switch quantityH
OptionNote 4, Note 5Note 6, Note 7Note 8, Note 10Note 11
I
Stroke F
Note on model No. selectionNote 1: Mounting bracket will be shipped with the product.Note 2: For 12, 16, 20, 25 and 32 bore sizes with option "R" or
"T", the mounting style will be "00" or "LB1" .(Piping with "LB" is not possible for options "R" and "T".)
Note 3: Refer to Pneumatic Cylinders I (CB-029SA) for min. stroke with switch.
Note 4: "*" of L* and N* indicates the number of sets. When more than one set are necessary, specify "L2" (for LB) or "N2" (for LB1). 2/set
Note 5: For the port and cushion needle position symbols, refer to dimensions on Pneumatic Cylinders I (CB-029SA).
Note 6: In the case of the standard type with φ 12 to φ 25, remove the cover, attach a flat nut and install the full stroke adjusting bracket. A flat nut is already included with option "A3" so that you can add the full stroke adjusting bracket without removing the cover.
Note 7: In "H", the thread size for φ 12 and φ 16 will be "M4" and that for φ 20 will be "M5".
Note 8: Check the option combinations in "Option selection table" on the next page.
Note 9: Copper and PTFE free as standard. (Except for the type with shock absorber)
Note 10: Operation oil contained in shock absorber is not graded for food.
Note 11: Options Y or Y1 cannot be selected, when variation G is selected.
SRL3-G-00-12B-200-M0H-R-BFP1[Example of model No.]
Model No.: Rodless cylinder, grade grease specifications for food
A Variation : With resin guideB Mounting style : Basic C Bore size : φ 12 mmD Port thread type : Rc threadE Cushion : Both sides cushionedF Stroke : 200 mmG Switch model No. : Reed switch M0H, lead wire 1 mH Switch quantity : 1 on R-sideI Option : Port position F, cushion needle position B
Bore sizeCVariationA
46
SRL3-FP1 Series
: Not available: AvailableOption selection table
OptionB
oth-
side
full
stro
ke a
djus
tabl
e, s
hock
abs
orbe
rR
-sid
e fu
ll st
roke
adj
usta
ble,
sho
ck a
bsor
ber
L-si
de fu
ll st
roke
adj
usta
ble,
sho
ck a
bsor
ber
Full
stro
ke a
djus
tabl
e/ad
just
ing
brac
ket t
o be
add
edFl
oatin
g fit
ting
Thin
floa
ting
fittin
gIn
term
edia
te s
uppo
rt br
acke
t (fo
r 00,
LB
)In
term
edia
te s
uppo
rt br
acke
t (fo
r LB
1)C
mou
nt b
rack
etLa
rger
thre
ad fo
r tab
le in
stal
latio
nH
eigh
t adj
ustm
ent p
late
Por
t pos
ition
F, c
ushi
on n
eedl
e po
sitio
n F
(sta
ndar
d)Po
rt po
sitio
n R,
cus
hion
nee
dle
posit
ion
F (c
omm
on p
ort)
Por
t pos
ition
F, c
ushi
on n
eedl
e po
sitio
n B
Port
posit
ion
R, c
ushi
on n
eedl
e po
sitio
n B
(com
mon
por
t)P
ort p
ositi
on D
, cus
hion
nee
dle
posi
tion
FP
ort p
ositi
on D
, cus
hion
nee
dle
posi
tion
DPo
rt po
sitio
n F,
cus
hion
nee
dle
posit
ion
F (c
omm
on p
ort)
Code A A1 A2 A3 Y Y1 L* N* C H U Blank R B T D S X
Opt
ion
AA1A2A3Y
Y1L*N*CHU
BlankRBTDSX
Note 1: Some combinations are not available depending on the bore size. Be sure to check the I Option in "How to order" on the previous page.
Note 2: LB1 with port position D is not possible. (φ 25, φ 32)
47
FP1
FP2
M E M OM E M O
48
49
Floating joint
FJ-FP1 Series• Applicable cylinder diameter: φ 20 to φ 200
Descriptions Port size of thread × pitch
Max. working tension and compression (kN) Note 1 Max. eccentricity (mm)
Oscillating angle
Ambient temperatureModel No. Basic Flange Foot
FJ-*- 3 M3 × 0.5 0.019 —— —— 0.5
±5° -10 to 60°C
4 M4 × 0.7 0.053 —— —— 0.5 5 M5 × 0.8 0.121 —— —— 0.5 6 M6 × 1.0 1.08 —— —— 0.75 8 M8 × 1.0 1.08 1.08 1.08 0.75 8−1.25 M8 × 1.25 1.08 1.08 1.08 0.75 10 M10 × 1.25 2.45 2.45 2.45 0.75 12−1.25 M12 × 1.25 2.45 2.45 2.45 0.75 12 M12 × 1.5 2.45 2.45 2.45 0.75 14 M14 × 1.5 5.88 5.88 5.88 1.0 16 M16 × 1.5 10.8 10.8 10.8 1.5 18 M18 × 1.5 10.8 10.8 10.8 1.5 22 M22 × 1.5 17.6 17.6 17.6 2.0 26 M26 × 1.5 27.5 27.5 27.5 3.0 30 M30 × 1.5 60.8 60.8 60.8 3.0 36 M36 × 1.5 87.3 87.3 87.3 4.0 40 M40 × 1.5 87.3 87.3 87.3 4.0 45 M45 × 1.5 108 108 108 4.0
Note 1: Max. working tension and compression shows static load.
Specifications
Code DescriptionsMounting
0 Basic L Foot F Flange
Port size of thread × pitchMounting O L F
3 M3 x 0.5 ●4 M4 x 0.7 ●5 M5 x 0.8 ●6 M6 x 1.0 ●8 M8 x 1.0 ● ● ●
8-1.25 M8 x 1.25 ● ● ●10 M10 x 1.25 ● ● ●
12-1.25 M12 x 1.25 ● ● ●12 M12 x 1.5 ● ● ●14 M14 x 1.5 ● ● ●16 M16 x 1.5 ● ● ●18 M18 x 1.5 ● ● ●22 M22 x 1.5 ● ● ●26 M26 x 1.5 ● ● ●30 M30 x 1.5 ● ● ●36 M36 x 1.5 ● ● ●40 M40 x 1.5 ● ● ●45 M45 x 1.5 ● ● ●
A
B
How to order
MountingA
Port size of thread × pitchB
FJ 30
[Example of model No.]FJ-0-3-FP1Model: Floating joint, food grade grease A Mounting : Basic B Port size of thread × pitch : M3 x 0.5
Pneumatic Cylinders II Catalog No. CB-029SA
FP1
NSF H1
FP1
FP2
50
M E M OM E M O
NSF H1Feather hand (mini-parallel hand) Double acting/single acting
FH100-FP1 Series Operational stroke: 8, 11, 14, 18, 20 mm
Specifications
* Integrated speed controller is available only for double acting.
Descriptions FH100
FH110-D FH112-D FH116-D FH120-D FH125-D FH110-0 FH112-0 FH116-0 FH120-0 FH125-0Actuation Double acting Single actingWorking fluid Compressed airMax. working pressure MPa 0.7Min. working pressure MPa 0.15 0.25Proof pressure MPa 1.05Ambient temperature °C 5 to 60Port size M3 × 0.5 M5 × 0.8 M3 × 0.5 M5 × 0.8Operational stroke mm 8 11 15 18 20 8 11 15 18 20Product weight g 51 71 124 176 284 51 71 124 177 286Repeatability (default) mm ±0.03Max. operating frequency cycle/sec. 3Cushion Opening direction rubber cushionLubrication Not required
OptionProximity switch (2 wire/3 wire)
* Closing speed controller
Double acting Single acting (normally open)
Note 1: Refer to pages Pneumatic Cylinders II (CB-030SA) for the dimensions and applicable model of the small jaw. When ordered as an option, two are included on delivery.
Note 2: Switches other than D switch model No. are available. (custom order) Refer to Pneumatic Cylinders II (No.CB-030SA) for details.
Note 3: When with end mount (model No. B), select switch with lead wire L-shaped (model No. T*V).The end mount is included with shipment.
BRT2H
Note on model No. selection
* indicates lead wire.
Y110 D BFH1 FP1
Y110 DFH1 FP1With switch
Without switch
Switch model No.Note 2
End mountNote 3
Switch quantity
Small jawNote 1
Option
Bore size
How to order
Code DescriptionsBore size10 φ 1012 φ 1216 φ 1620 φ 2025 φ 25
OptionD Standard (double acting)O Single acting (normally open)Z Double acting integrated speed controller
Small jawBlank No small jaw
Y1 Small jaw material (S50C)Y2 Small jaw material (MC nylon)
Switch model No.Lead wire straight
Lead wire L-shaped Co
ntac
t
VoltageDisplay
Lead wireAC DC
T2H* T2V*
Prox
imity 1 color
display
2 line
T3H* T3V* 3 line
* Lead wireBlank 1 m (standard)
3 3 m (option)5 5 m (option)
Switch quantityR One on right (port) side opening positionD 2
End mountBlank No end mount
B End mount
A
B
C
D
E
F
A
B
C
D
E
F
Pneumatic Cylinders IICatalog No. CB-030SA
51
FP1
FP2
FH100-FP1 SeriesGripping power performance data
(Note) Single acting closing grip power is decreased by 25 to 30% compared to the double acting type.
Restriction range for length of jaw ℓ FH110
FH125 FH120 FH116 FH112
Gripping power performance dataGripping power that functions to open and close with jaw length ℓ of hand at supply pressure 0.15 to 0.7 MPa is shown. Opening direction ( ) (shown with broken line) Closing direction ( ) (shown with continuous line)
When selecting, read the precautions for design and selection on Pneumatic Cylinders II (CB-030SA).
FH125
FH120
FH116
FH112
FH110
ℓ
(cm)
0
Length of jaw (ℓ)
(cm)Length of jaw (ℓ)
0.15 MPa closing
(cm)Length of jaw (ℓ)
0.15 MPa closing
(cm)Length of jaw (ℓ)(cm)Length of jaw (ℓ)
(cm)Gripping power (ℓ)
Air p
ress
ure
(MPa
)
0.7 MPa closing
0.15 MPa closing0.15 MPa opening0.3 MPa closing
0.3 MPa opening0.5 MPa closing
0.5 MPa opening
0.7 MPa opening
(N)
10
5
97531
60
50
40
30
20
10
(N)
975310
0.7 MPa closing
0.15 MPa opening0.3 MPa closing
0.3 MPa opening0.5 MPa closing
0.5 MPa opening
0.7 MPa opening
(N)50
40
30
20
10
975310
0.7 MPa closing
0.15 MPa opening0.3 MPa closing
0.3 MPa opening0.5 MPa closing
0.5 MPa opening
0.7 MPa opening
(N)25
20
15
10
5
975310
0.7 MPa closing
0.3 MPa closing
0.3 MPa opening0.5 MPa closing
0.5 MPa opening
0.7 MPa opening
(N)
15
10 0.7 MPa closing
0.15 MPa closing0.15 MPa opening
0.3 MPa closing0.3 MPa opening0.5 MPa closing
0.5 MPa opening
0.7 MPa opening
5
975310
0.15 MPa opening0.15 MPa closing
0.6
0.3
10987654321
0.7
0.5
0.4
0.2
0.1
0
Grip
ping
pow
er
Grip
ping
pow
er
Grip
ping
pow
er
Grip
ping
pow
er
Grip
ping
pow
er
52
NSF H1Compact cross roller parallel hand Double acting/single acting
BHA-FP1 Series Operational stroke: 5, 9, 11, 15 mm
Descriptions BHASize 01CS1 03CS1 04CS1 05CS1Bore size mm φ 12 φ 16 φ 20 φ 25Actuation Double acting/single actingWorking fluid Compressed airMax. working pressure MPa 0.7
Min. working pressure MPa
Double acting 0.1Normally open
0.3Normally closed
Ambient temperature °C 5 to 60Port size M3 M5Operational stroke mm 5 9 11 15Rod diameter mm φ 6 φ 8 φ 10 φ 12Capacity of reciprocating cm3 0.32 1.58 2.89 6.32Repeatability mm ±0.01 Product weight kg 0.100 0.145 0.253 0.420Lubrication Not required
O R01CS1 T2H
* indicates lead wire.
O01CS1BHA FP1
BHA FP1With switch
Without switch
Switch quantity
Switch model No.
OptionNote 1
How to order
Code DescriptionsSize
01CS103CS104CS105CS1
OptionBlank Standard (double acting)
O Single acting (normally open)C Single acting (normally closed)Y1 Small jaw material (S50C)Y2 Small jaw material (MC nylon)
Switch model No.Lead wire straight
Lead wire L-shaped Co
ntact Voltage
DisplayLead wireAC DC
T2H* T2V*
Prox
imity 1 color
display2 line
T3H* T3V* 3 line* Lead wire
Blank 1 m (standard)3 3 m (option)5 5 m (option)
Switch quantityR 1 on opening sideH 1 on closing sideD 2
Specifications
A
B
Size
A
B
C
D
C
D
Note on model No. selectionNote 1: 2 pieces of small jaws are provided for
options Y1, Y2.Note 2: Refer to Pneumatic Cylinders II (CB-030SA)
for switches other than listed above.
Double actingSingle acting (normally open)
Single acting (normally closed)Pneumatic Cylinders II
Catalog No. CB-030SA
53
FP1
FP2
BHA-FP1 SeriesGripping power performance data
BHA-03CS1 BHA-01CS1
(Note) O type gripping power decreases approximately 20 to 30% in the closing direction compared to the double acting type.C type gripping power decreases approximately 10 to 20% in the opening direction compared to the double acting type.When selecting, read the precautions for design and selection on Pneumatic Cylinders II (CB-030SA).
Gripping power performance dataGripping power that functions to open and close with jaw length ℓ of hand at supply pressure 0.3, 0.5 and 0.7 MPa is shown. Opening direction ( ) (shown with broken line) Closing direction ( ) (shown with continuous line)
BHA-05CS1 BHA-04CS1
(cm) (cm)
(cm)(cm)
Length of jaw (ℓ) Length of jaw (ℓ)
Length of jaw (ℓ)Length of jaw (ℓ)
(N)(N)
(N)(N)
161284
0.5 MPa closing
0.7 MPa closing
0.3 MPa closing
0.5 MPa opening
0.7 MPa opening
0
150
120
90
60
30
108642
0.5 MPa closing
0.7 MPa closing
0.3 MPa closing
0.3 MPa opening
0.5 MPa opening
0.7 MPa opening
0
60
40
20
108642
0.5 MPa closing
0.7 MPa closing
0.3 MPa closing
0.3 MPa opening
0.5 MPa opening
0.7 MPa opening
0
50
40
30
20
10
0.5 MPa closing
0.7 MPa closing
0.3 MPa closing
0.3 MPa opening
0.5 MPa opening
0.7 MPa opening
1086420
30
20
10
0.3 MPa opening
ℓ
Grip
ping
pow
er
Grip
ping
pow
er
Grip
ping
pow
er
Grip
ping
pow
er
54
55
NSF H1Compact cross roller parallel hand with rubber cover Double acting/single acting
BHG-FP1 Series● Operating stroke: 5, 9, 11, 15 mm
Descriptions BHGSize 01CS 03CS 04CS 05CSBore size mm φ 12 φ 16 φ 20 φ 25Actuation Double acting/single actingWorking fluid Compressed airMax. working pressure MPa 0.7
Min. working pressure MPa
Double acting 0.15Normally open
0.3Normally closed
Ambient temperature °C 5 to 60Port size M3 M5Operating stroke mm 5 9 11 15Rod diameter mm φ 6 φ 8 φ 10 φ 12Volumetric capacity (reciprocation) cm3 0.32 1.58 2.89 6.32Repeatability mm ±0.01Weight kg 0.118 0.165 0.238 0.455Lubrication Not requiredRubber cover Material conforming to the Food Sanitation Act (silicone rubber), blue
Specifications
Double acting Single acting (normally open) Single acting (normally closed)Pneumatic Cylinders II Catalog No. CB-030SA
BHG O01CS FP1
FP1O R01CS T2HBHGWith switch (integrated magnet for switch)
Without switch (integrated magnet for switch)
How to order
Switch quantity
Switch model No.
Option Note 1A Size B
C
D
Code DescriptionsSize
01CS03CS04CS05CS
OptionBlank Standard (double acting)
O Single acting (normally open)C Single acting (normally closed)Y1 Small jaw (Material S50C)Y2 Small jaw (Material MC nylon)
Switch model No.Axial lead
wireRadial lead
wire Conta
ct VoltageDisplay
Lead wireAC DC
T2H* T2V*
Proxim
ity ● 1-color display
2-wireT3H* T3V* ● 3-wire
* Lead wire 3-wireBlank 1 m (standard)
3 3 m (option)5 5 m (option)
Switch quantityR 1 on opening sideH 1 on closing sideD 2
A
B
C
D
Precautions for model No. selectionNote 1: For the small jaw of option Y1 and Y2, two are included on delivery.Note 2: Refer to Pneumatic Cylinders II (CB-030SA) for switches other than
those listed here.
FP1
FP2
56
BHG-FP1 SeriesGripping power performance data
(Note) O type gripping power decreases approximately 20 to 30% in the closing direction compared to the double acting type.C type gripping power decreases approximately 10 to 20% in the opening direction compared to the double acting type.When making a selection, read the precautions for design and selection in Pneumatic Cylinders II (CB-030SA).
Rubber cover part model No.Size Part model No. Part No.01CS BHG-01K-FP1
2503CS BHG-03K-FP104CS BHG-04K-FP105CS BHG-05K-FP1
Gripping power performance dataThe gripping power in the opening/closing directions with jaw length ℓ of hand with a supply pressure of 0.3, 0.5 and 0.7 MPa is shown. ● Opening direction ( ) (shown with broken line) ● Closing direction ( ) (shown with continuous line)
● BHG-03CS● BHG-01CS
● BHG-05CS● BHG-04CS
Grip
ping
pow
er
Grip
ping
pow
er
Grip
ping
pow
er
Grip
ping
pow
er
(cm) (cm)
(cm) (cm)
Length of jaw (ℓ) Length of jaw (ℓ)
Length of jaw (ℓ) Length of jaw (ℓ)
0.3 MPa opening
0.5 MPa opening
201612840
150
120
90
60
30
108642
0.3 MPa closing
0.3 MPa opening
0.5 MPa opening
0.7 MPa opening
0
60
40
20
108642
0.3 MPa opening
0.7 MPa opening
0
50
40
30
20
10
0.3 MPa opening
1086420
30
20
10
(N) (N)
(N)(N)
ℓ
0.5 MPa closing
0.7 MPa closing
0.3 MPa closing
0.5 MPa opening
0.7 MPa opening
0.5 MPa closing
0.7 MPa closing
0.3 MPa closing
0.5 MPa opening
0.7 MPa closing
0.5 MPa closing 0.5 MPa closing
0.3 MPa closing
0.7 MPa closing0.7 MPa opening
NSF H1Compact wide parallel hand (standard/long stroke)
HMF-FP1 Series Operational stroke: Standard 30, 40, 50, 70, 100 mm
Long stroke: 60, 80, 100, 120, 160, 200 mm
Descriptions HMF-12CSHMF-16CS HMF-20CS HMF-25CS HMF-32CS HMF-40CS
Standard L1 L2 Standard L1 L2 Standard L1 L2 Standard L1 L2 Standard L1 L2Bore size mm φ 12 × 2 φ 16 × 2 φ 20 × 2 φ 25 × 2 φ 32 × 2 φ 40 × 2Working fluid Compressed airMax. working pressure MPa 0.7Min. working pressure MPa 0.3Ambient temperature °C 5 to 60Port size M5 Rc1/8Operational stroke mm 20 30 60 80 40 80 100 50 100 120 70 120 160 100 160 200Rod diameter mm φ 6 φ 8 φ 10 φ 12 φ 16 φ 20Capacity of reciprocating cm3 3.4 9.1 18.1 24.1 18.8 37.6 47.0 37.7 75.4 90.5 84.4 145 193 226 301 377Repeatability mm ±0.1Product weight kg 0.31 0.54 0.95 1.12 0.90 1.58 1.77 1.7 2.16 2.3 2.8 3.8 4.8 5.7 7.8 8.8Lubrication Not required
Switch model No.C
OptionNote 1
B
Switch quantityD
SizeA
Specifications
How to order
Code DescriptionsSize
12CS16CS20CS25CS32CS40CS
OptionBlank StandardL1 Long stroke 1L2 Long stroke 2
Switch model No.Lead wire straight
Lead wire L-shaped Co
ntac
t
VoltageDisplay
Lead wireAC DC
T2H* T2V*
Prox
imity 1 color
display2 line
T3H* T3V* 3 line* Lead wireBlank 1 m (standard)
3 3 m (option)5 5 m (option)
Switch quantityR 1 on opening sideH 1 on closing sideD 2
A
B
C
D
32CS FP1RT2HHMF L1
Note 1: 12CS is not available for long stroke "L1", "L2".
Note on model No. selection
Double acting
Note: Refer to Pneumatic Cylinders II (CB-030SA) for switches other than listed above.
Pneumatic Cylinders IICatalog No. CB-030SA
57
FP1
FP2
HMF-FP1 SeriesGripping power performance data
(Note) When selecting, read the precautions for design and selection on Pneumatic Cylinders II (CB-030SA).
Gripping power performance dataGripping power that functions with jaw length ℓ of hand at supply pressure 0.3, 0.5 and 0.7 MPa is shown. Both opening direction ( ) closing direction ( ) (shown with continuous line)
HMF-12CS
HMF-25CS
HMF-16CS
HMF-32CS
HMF-20CS
HMF-40CS
ℓ
(cm)Length of jaw (ℓ)
(N)
0.5 MPa open/close
0.3 MPa open/close
0.7 MPa open/close
14121086420
200
150
100
50
(cm)Length of jaw (ℓ)
(N)
0.5 MPa open/close
0.3 MPa open/close
0.7 MPa open/close
181614121086420
350
300
250
200
150
100
50
(cm)Length of jaw (ℓ)
(N)
0.5 MPa open/close
0.3 MPa open/close
0.7 MPa open/close
181614121086420
600550500
400450
350300250200
150
(N)
(cm)Length of jaw (ℓ)
0.5 MPa open/close
0.3 MPa open/close
0.7 MPa open/close
1086420
150
100
50
(N)
0.5 MPa open/close
0.3 MPa open/close
0.7 MPa open/close
543210
50
40
30
20
10
(cm)Length of jaw (ℓ) (cm)Length of jaw (ℓ)
(N)
0.5 MPa open/close
0.3 MPa open/close
0.7 MPa open/close
1086420
100
80
60
40
20
Grip
ping
pow
er
Grip
ping
pow
er
Grip
ping
pow
er
Grip
ping
pow
er
Grip
ping
pow
er
Grip
ping
pow
er
58
NSF H1
Note 1: Refer to pages Pneumatic Cylinders II (CB-030SA) for the dimensions and applicable model of the small jaw. When ordered as an option, two are included on delivery.
Note 2: Switches other than D switch model No. are available. (custom order) Refer to Pneumatic Cylinders II (No.CB-030SA) for details.
Note 3: When with end mount (model No. B), select switch with lead wire L-shaped (model No. T*V).The end mount is included with shipment.
Y110 D BRT2V
* indicates lead wire.
Y110 D BFH5 FP1
FH5 FP1With switch
Without switch
Switch model No.Note 2
D
End mountNote 3
F
Switch quantityE
Small jawNote 1
C
Option
How to order
B
Bore sizeA
Code DescriptionsBore size10 φ 1012 φ 1216 φ 1620 φ 20
OptionD Double actingO Single acting (normally open)Z Double acting integrated speed controller
Small jawBlank No small jaw
Y1 Small jaw material (S50C)Y2 Small jaw material (MC nylon)
Switch model no.Lead wire straight
Lead wire L-shaped Co
ntac
t
VoltageDisplay
Lead wireAC DC
T2H* T2V*
Prox
imity 1 color
display 2 line
T3H* T3V* 3 line* Lead wire 3 wiresBlank 1 m (standard)
3 3 m (option)5 5 m (option)
Switch quantityR 1 on opening sideH 1 on closing sideD 2
End mountBlank No end mount
B End mount
Note on model No. selection
A
B
C
D
E
F
Feather hand (mini-fulcrum hand) Double acting/single acting
FH500-FP1 Series Opened / closed angles: 20° at opened, -5° at closed
* Integrated speed controller is available only for double acting.
DescriptionsFH500
FH510-D FH512-D FH516-D FH520-D FH510-O FH512-O FH516-O FH520-OActuation Double acting Single actingWorking fluid Compressed airMax. working pressure MPa 0.7Min. working pressure MPa 0.15 0.25Proof pressure MPa 1.05Ambient temperature °C 5 to 60Port size M3 M5 M3 M5Opened / closed angles Degree 20° at opened -5° at closedProduct weight g 43 53 92 135 43 53 92 136Repeatability (default) mm ±0.03Max. operating frequency cycle/sec. 3Cushion Opening direction rubber cushionLubrication Not required
OptionProximity switch (2 wire/3 wire)
* Closing speed controller, end mount
Specifications
Double acting Single acting (normally open)Pneumatic Cylinders IICatalog No. CB-030SA
59
FP1
FP2
FH500-FP1 SeriesGripping power performance data
(Note) Single acting closing grip power is decreased by 25 to 30% compared to the double acting type.When selecting, read the precautions for design and selection on Pneumatic Cylinders II (CB-030SA).
FH510 FH512
FH516 FH520
Gripping power that functions to open and close with jaw length ℓ of hand at supply pressure 0.15 to 0.7 MPa is shown. Opening direction ( ) (shown with broken line) Closing direction ( ) (shown with continuous line)
Gripping power performance data
ℓ
(N)
54321(cm)Length of jaw (ℓ)
0
10
5
(N)
543210
5
(cm)Length of jaw (ℓ)
0.7 MPa opening
0.5 MPa opening
0.5 MPa closing
0.7 MPa closing
0.15 MPa closing
0.15 MPa opening0.3 MPa closing
0.3 MPa opening
0.7 MPa opening
0.5 MPa opening
0.5 MPa closing
0.7 MPa closing
0.15 MPa closing
0.15 MPa opening0.3 MPa closing
0.3 MPa opening
(N)
54321(cm)Length of jaw (ℓ)
0
50
30
20
10
40
(N)
543210
25
15
10
5
20
(cm)Length of jaw (ℓ)
0.5 MPa opening0.5 MPa closing
0.7 MPa closing
0.15 MPa closing0.15 MPa opening
0.3 MPa closing0.3 MPa opening
0.7 MPa opening
0.5 MPa opening0.5 MPa closing
0.7 MPa closing
0.15 MPa closing0.15 MPa opening
0.3 MPa closing0.3 MPa opening
0.7 MPa opening
Grip
ping
pow
er
Grip
ping
pow
er
Grip
ping
pow
er
Grip
ping
pow
er
60
61
NSF H13-way jaw bearing chuck Double acting/single acting
CKG-FP1 Series
● Operating stroke: 6, 8, 11, 16 mm
Descriptions CKGSize 16CS 25CS 32CS 40CS 50CSBore size mm φ 16 φ 25 φ 32 φ 40 φ 50Actuation Double acting/single actingWorking fluid Compressed airMax. working pressure MPa 0.7
Min. working pressure Note MPa
Double acting 0.1Normally open
0.3Normally closed
Ambient temperature °C 5 to 60Port size M5Operating stroke mm 6 8 11 16Rod diameter mm φ 9 φ 10 φ 14 φ 18 φ 20Volumetric capacity (reciprocation) cm3 1.0 2.2 5.1 10.1 36.1Repeatability mm ±0.01Weight kg 0.24 0.47 0.80 1.4 2.3Lubrication Not requiredRubber cover Material conforming to the Food Sanitation Act (silicone rubber), blueNote: When a rubber cover (option) is included, the min. working pressure is 0.2 MPa for 16CS and 0.15 MPa for 25CS to 50CS.
Specifications
Precautions for model No. selectionNote 1: Y11 and Y21 are available for CKG-16CS,
while Y11, Y12, Y21 and Y22 are available for CKG-25CS to 40CS, and Y11 and Y21 are available for CKG-50CS.
Note 2: Refer to Pneumatic Cylinders II (CB-030SA) for the dimensions and applicable model of the small jaw. When ordered as an option, three are included at shipment.
Note 3: C Switches other than switch model No. are also available. (Custom order) Refer to “Pneumatic Cylinders II” (CB-030SA) for details.
Double acting Single acting (normally open) Single acting (normally closed)Pneumatic Cylinders II Catalog No. CB-030SA
16CS FP1
FP1
OCKG
T2H16CS O RCKGWith switch (integrated magnet for switch)
Without switch (integrated magnet for switch)
Switch quantity
OptionNote 1, Note 2Size
*1 Select G for option B to attach a silicone rubber cover.
How to order
B
C
A
D
Code DescriptionsSize
16CS25CS32CS40CS50CS
OptionBlank Standard (double acting)
O Single acting (normally open)C Single acting (normally closed)G Rubber cover (silicone-based) *1
Y11 Small jaw (Material S50C)Outer mount chuck (small jaw No.: 540 to 710)
Y12 Small jaw (Material S50C)Inner mount chuck (small jaw No.: 610 to 630)
Y21 Smalll jaw (Material MC nylon)Outer mount chuck (small jaw No.: 510 to 540, 710)
Y22 Small jaw (Material MC nylon)Inner mount chuck (small jaw No.: 610 to 630)
Switch model No.
Axial lead wire
Radial lead wire
Con
tact Voltage
Display Lead wireAC DC
T2H* T2V*
Prox
imity ● 1-color
display2-wire
T3H* T3V* ● 3-wire* Lead wire Blank 1 m (standard)
3 3 m (option)5 5 m (option)
Switch quantityR 1 on opening sideH 1 on closing sideD 2
A
B
C
D
Switch model No.Note 3
FP1
FP2
62
Gripping power that functions to open and close with jaw length ℓ of hand at supply pressure 0.3, 0.5 and 0.7 MPa is shown. ● Opening direction ( ) (shown with broken line) ● Closing direction ( ) (shown with continuous line)
CKG-FP1 SeriesGripping power performance data
(Note) O type gripping power decreases approximately 20 to 30% in the closing direction compared to the double acting type.C type gripping power decreases approximately 10 to 20% in the opening direction compared to the double acting type.When making a selection, read the precautions for design and selection in Pneumatic Cylinders II (CB-030SA).
● CKG-16CS ● CKG-25CS
● CKG-40CS ● CKG-50CS● CKG-32CS
Gripping power performance data
(N)
60
40
20
1086420
Grip
ping
pow
er
(cm)Length of jaw (ℓ)
(N)
30
20
10
1086420
(cm)Length of jaw (ℓ)
Grip
ping
pow
er
0.3 MPa closing0.3 MPa opening0.5 MPa closing0.5 MPa opening
(N)
300
200
100
20100
Grip
ping
pow
er
(cm)Length of jaw (ℓ)
(N)
240
160
80
1086420
Grip
ping
pow
er
(cm)Length of jaw (ℓ)
(N)
120
80
40
1086420
Grip
ping
pow
er
(cm)Length of jaw (ℓ)
0.3 MPa closing
0.3 MPa opening
0.5 MPa opening
ℓ
0.7 MPa closing
0.3 MPa opening0.5 MPa closing0.5 MPa opening
0.7 MPa opening
0.3 MPa closing
0.7 MPa closing
0.7 MPa opening
0.5 MPa closing
0.7 MPa closing
0.7 MPa opening
0.3 MPa closing0.3 MPa opening
0.5 MPa closing0.5 MPa opening
0.7 MPa closing
0.7 MPa opening
0.3 MPa closing
0.3 MPa opening0.5 MPa closing0.5 MPa opening
0.7 MPa closing
0.7 MPa opening
63
NSF H1Powerful chuck
CKL2-FP1 Series● Operational stroke: 5, 6, 8, 10, 12, 16, 20, 23 mm
Descriptions CKL2Size 20CS 25CS 32CS 40CS 50CS 63CS 80CS 100CSBore size mm φ 20 φ 25 φ 32 φ 40 φ 50 φ 63 φ 80 φ 100Working fluid Compressed airMax. working pressure MPa 0.7Min. working pressure MPa 0.3Ambient temperature °C 5 to 60Port size M5 Rc1/8Operating stroke mm 5 6 8 10 12 16 20 23Rod diameter mm φ 6 φ 8 φ 10 φ 12 φ 14 φ 16 φ 20Volumetric capacity (reciprocation) cm3 1.8 3.3 7.7 15.6 28.3 60.3 118.2 215.5Repeatability mm ±0.01Weight kg 0.12 0.19 0.26 0.38 0.59 1.02 2.02 3.45Lubrication Not required
Note 1: The small jaw is commonly used for inner and outer diameter chucks.Note 2: Refer to Pneumatic Cylinders II (CB-030SA) for the dimensions and applicable model of
the small jaw. When ordered as an option, three are included at shipment.
O R20CS T2H
O20CS FP1
FP1
CKL2
CKL2With switch (integrated magnet for switch)
Without switch (integrated magnet for switch)
Switch quantityD
Switch model No.C
OptionNote 1, Note 2
Size
How to order
B
A
Specifications
Precautions for model No. selection
Code DescriptionsSize
20CS25CS32CS40CS50CS63CS80CS100CS
OptionBlank Standard (double acting)
O Single acting (normally open)C Single acting (normally closed)Y1 Small jaw (Material S50C)Y2 Small jaw (Material MC nylon)
Switch model No.Axial
lead wireRadial
lead wire Cont
act
VoltageDisplay
Lead wireAC DC
T2H* T2V*
Prox
imity ● 1-color
display2-wire
T3H* T3V* ● 3-wire
* Lead wire Blank 1 m (standard)
3 3 m (option)5 5m (option)
Switch quantityR 1 on opening sideH 1 on closing sideD 2
A
B
C
D
Double acting Single acting (normally open) Single acting (normally closed)Pneumatic Cylinders II Catalog No. CB-030SA
FP1
FP2
64
The gripping power in the opening/closing directions with jaw length ℓ of hand with a supply pressure of 0.3, 0.5 and 0.7 MPa is shown.
·Opening direction ( ) (shown with broken line)·Closing direction ( ) (shown with continuous line)
CKL2-FP1 SeriesGripping power performance data
● CKL2-63CS
● CKL2-100CS● CKL2-80CS
● CKL2-50CS● CKL2-40CS
● CKL2-32CS● CKL2-25CS● CKL2-20CS
Gripping power performance data
(Note) O type gripping power decreases approximately 20 to 30% in the closing direction compared to the double acting type.C type gripping power decreases approximately 10 to 20% in the opening direction compared to the double acting type.When making a selection, read the precautions for design and selection in Pneumatic Cylinders II (CB-030SA).
ℓ
4321
(N)
75
25
50
0
Grip
ping
pow
er
Length of jaw (ℓ) (cm)
0.3 MPa closing0.3 MPa opening
0.5 MPa opening
0.7 MPa closing
0.5 MPa closing
0.7 MPa opening0.7 MPa closing
0.3 MPa closing0.3 MPa opening
0.5 MPa closing0.5 MPa opening
0.7 MPa opening
4321
(N)
75
25
50
0
Length of jaw (ℓ) (cm)
Grip
ping
pow
er
4321
(N)
150
50
100
0
0.5 MPa closing
Length of jaw (ℓ) (cm)
Grip
ping
pow
er
0.7 MPa closing
0.3 MPa closing0.3 MPa opening
0.7 MPa opening
654321
(N)
200
100
0
Length of jaw (ℓ) (cm)
Grip
ping
pow
er 0.7 MPa closing
0.3 MPa closing0.3 MPa opening
0.5 MPa closing
0.5 MPa opening
0.7 MPa opening
654321
(N)
400
200
Length of jaw (ℓ) (cm)
Grip
ping
pow
er
0
0.7 MPa closing
0.3 MPa closing
0.3 MPa opening0.5 MPa closing
0.5 MPa opening
0.7 MPa opening
87654321
(N)
400
200
Length of jaw (ℓ) (cm)
Grip
ping
pow
er
0
0.7 MPa closing
0.3 MPa closing
0.3 MPa opening0.5 MPa closing
0.5 MPa opening
0.7 MPa opening
87654321
(N)
800
400
0
Length of jaw (ℓ) (cm)
Grip
ping
pow
er
0.3 MPa closing 0.3 MPa opening
0.5 MPa closing0.5 MPa opening
0.7 MPa opening0.7 MPa closing
987654321
(N)1200
800
400
0
Length of jaw (ℓ) (cm)
Grip
ping
pow
er
0.7 MPa closing
0.3 MPa closing
0.3 MPa opening0.5 MPa closing
0.5 MPa opening
0.7 MPa opening
0.5 MPa opening
65
NSF H1Powerful chuck
CKLG2-FP1 Series● Operational stroke: 5, 6, 8, 10, 12, 16, 20, 23 mm
Descriptions CKLG2Size 20CS 25CS 32CS 40CS 50CS 63CS 80CS 100CSBore size mm φ 20 φ 25 φ 32 φ 40 φ 50 φ 63 φ 80 φ 100Working fluid Compressed airMax. working pressure MPa 0.7Min. working pressure MPa 0.3Ambient temperature °C 5 to 60 Port size M5 Rc1/8Operating stroke mm 5 6 8 10 12 16 20 23Rod diameter mm φ 6 φ 8 φ 10 φ 12 φ 14 φ 16 φ 20Volumetric capacity (reciprocation) cm3 1.8 3.3 7.7 15.6 28.3 60.3 118.2 215.5Repeatability mm ±0.01Weight kg 0.12 0.19 0.26 0.38 0.59 1.02 2.02 3.45Lubrication Not required
Specifications
Double acting Single acting (normally open) Single acting (normally closed)
FP1
FP2
66
CKLG2-FP1 SeriesHow to order
Note 1: The small jaw is commonly used for inner and outer diameter chucks.Note 2: Refer to CKL2 in Pneumatic Cylinders II (CB-030SA) for the dimensions and
applicable model of the small jaw. When ordered as an option, three are included at shipment.
O R20CS T2H FP1
O20CS FP1CKLG2
CKLG2With switch (integrated magnet for switch)
Without switch (integrated magnet for switch)
Switch quantityD
Switch model No.C
OptionNote 1, Note 2
Size
How to order
B
A
Precautions for model No. selection
Code DescriptionsSize
20CS25CS32CS40CS50CS63CS80CS100CS
OptionBlank Standard (double acting)
O Single acting (normally open)C Single acting (normally closed)Y1 Small jaw (Material S50C)Y2 Small jaw (Material MC nylon)
Switch model No.Axial
lead wireRadial
lead wire Cont
act
VoltageDisplay Lead wire
AC DCT2H* T2V*
Prox
imity ● 1-color
display2-wire
T3H* T3V* ● 3-wire
* Lead wireBlank 1 m (standard)
3 3 m (option)5 5m (option)
Switch quantityR 1 on opening sideH 1 on closing sideD 2
A
B
C
D
67
The gripping power in the opening/closing directions with jaw length L of hand with a supply pressure of 0.3, 0.5 and 0.7 MPa is shown. ·Opening direction ( ) (shown with broken line) ·Closing direction ( ) (shown with continuous line)
CKLG2-FP1 Series
● CKLG2-63CS
● CKLG2-100CS● CKLG2-80CS
● CKLG2-50CS● CKLG2-40CS
● CKLG2-32CS● CKLG2-25CS● CKLG2-20CS
Gripping power performance data
(Note) O type gripping power decreases approximately 20 to 30% in the closing direction compared to the double acting type.C type gripping power decreases approximately 10 to 20% in the opening direction compared to the double acting type.When making a selection, read the precautions for chuck design and selection in Pneumatic Cylinders II (CB-030SA).
0.7 MPa closing
0.3 MPa opening
0.5 MPa opening
0.7 MPa closing
0.5 MPa closing
0.3 MPa closing0.3 MPa opening
0.5 MPa closing
0.3 MPa closing
0.3 MPa opening0.3 MPa opening
0.3 MPa closing
0.3 MPa closing
0.3 MPa opening
0.7 MPa closing0.7 MPa opening
0.7 MPa opening
0.5 MPa closing
0.3 MPa closing 0.3 MPa opening
0.5 MPa opening
0.5 MPa closing
0.3 MPa opening0.3 MPa closing
ℓ
4321
(N)
75
25
50
0
Grip
ping
pow
er
Length of jaw (ℓ) (cm)
0.3 MPa closing0.3 MPa opening
0.5 MPa opening0.5 MPa closing
0.7 MPa opening
0.7 MPa opening
4321
(N)
75
25
50
0
Length of jaw (ℓ) (cm)
Grip
ping
pow
er
4321
(N)
150
50
100
0
Length of jaw (ℓ) (cm)
Grip
ping
pow
er
0.7 MPa closing0.7 MPa opening
654321
(N)
200
100
0
Length of jaw (ℓ) (cm)
Grip
ping
pow
er 0.7 MPa closing
0.3 MPa closing
0.5 MPa closing
0.5 MPa opening
0.7 MPa opening
654321
(N)
400
200
Length of jaw (ℓ) (cm)
Grip
ping
pow
er
0
0.7 MPa closing
0.5 MPa closing
0.5 MPa opening
0.7 MPa opening
87654321
(N)
400
200
Length of jaw (ℓ) (cm)
Grip
ping
pow
er
0
0.7 MPa closing
0.5 MPa opening
0.7 MPa opening
87654321
(N)
800
400
0
Length of jaw (ℓ) (cm)
Grip
ping
pow
er 0.7 MPa closing
987654321
(N)1200
800
400
0
Length of jaw (ℓ) (cm)
Grip
ping
pow
er
0.5 MPa closing
0.5 MPa opening
0.5 MPa opening
FP1
FP2
68
CKLG2-FP1 SeriesDimensions
DimensionsQQ CKLG2-20AS( ) are dimensions for the single acting type.
( ) are dimensions for the single acting type.
QQ CKLG2-25AS
M5Closed port
M5Closed port
15(25)
14(24)
7.5
9
M5Open port
M5Open port
47.5(57.5)
49.5(59.5)
120° divided into three
120° divided into three
42°
42°
45° 45°
45°1.5
3 x 2-M3 depth 6
3 x 2-M4 depth 8
29.5
29
13.5
17.5
1519
.5
34
2.5
3.5
79
28
33.5
1216
φ 37
.5φ
48
MA
X 8
.5M
IN 6
MA
X 1
0M
IN 7
57
2
3
1.5
2
20
22
6 0-0.012
7 0-0.015
2+0
.03
0
φ 2+0.0250 depth 2
φ 3+0.0250 depth 3
φ 21+0.0520 depth 1.85
φ 26+0.0520 depth 1.65
2 +0.0250
depth 2
3 +0.0250
depth 3
3-M4 depth 8P.C.D.30 (mounting screw)
3-M5 depth 10P.C.D.39 (mounting screw)
2+0
.03
0
69
CKLG2-FP1 Series
DimensionsQQ CKLG2-32AS
QQ CKLG2-40AS
( ) are dimensions for the single acting type.
( ) are dimensions for the single acting type.
M5Closed port
M5Closed port
16(26)
18(30)
9
9
M5Open port
M5Open port
52(62)
55.5(67.5)
120° divided into three
120° divided into three
42°
42°
45°
45°
3 x 2-M4 depth 8
3 x 2-M5 depth 10
30
30
19.5
23.5
2226
.5
56
44.
510
12
36.5
42.5
18
21
φ 54
φ 63
MA
X 1
2M
IN 8
MA
X 1
5M
IN 1
0
7.5
9
3
3
2
2.5
25
26
8 0-0.015
8 0-0.015
φ 3+0.0250 depth 3
φ 4+0.030 depth 4
φ 34+0.0620 depth 2.25
φ 42+0.0620 depth 2.05
3 +0.0250
depth 2
4 +0.030 depth 4
3-M5 depth 10P.C.D.44 (mounting screw)
3-M6 depth 12P.C.D.53 (mounting screw)
3+0
.03
0
3+0
.03
0
1
2
FP1
FP2
70
CKLG2-FP1 SeriesDimensions
DimensionsQQ CKLG2-50AS
QQ CKLG2-63AS
( ) are dimensions for the single acting type.
( ) are dimensions for the single acting type.
M5Closed port
M5Closed port
19(31)
24(44)
10
13
M5Open port
M5Open port
63.5(75.5)
76.5(96.5)
120° divided into three
120° divided into three
42°
42°
45°
45°
3 x 2-M6 depth 12
3 x 2-M6 depth 12
41.5
49.5
29
35
31.5
38
5
6
55.
514
1648
57.5
2427
φ 72
φ 85
MA
X 1
7.5
MIN
11.
5
MAX
24
MIN
16
1011
3
3
2.5
2.5
29
33
10 0-0.015
12 0-0.018
4+0
.03
0
φ 4+0.030 depth 4
φ 5+0.030 depth 5
φ 52+0.0740 depth 2.3
φ 65+0.0740 depth 2.8
4 +0.030 depth 4
5 +0.030 depth 5
3-M6 depth 12P.C.D.63 (mounting screw)
3-M6 depth 12P.C.D.76 (mounting screw)
5+0
.03
0
71
DimensionsQQ CKLG2-80AS
QQ CKLG2-100AS
CKLG2-FP1 Series
( ) are dimensions for the single acting type.
( ) are dimensions for the single acting type.
Rc1/8Closed port
Rc1/8Closed port
27(49)
34(56)
15
17
Rc1/8Open port
Rc1/8Open port
89.5(111.5)
104.5(126.5)
120° divided into three
120° divided into three
42°
50°
45°
45°
3 x 2-M8 depth 16
3 x 2-M8 depth 16
59.5
70.5
44
55
48
59
8
8
77
1820
71.5
83.5
3234
φ 11
1φ
133
MAX
32
MIN
22
MAX
41.
5M
IN 3
013
14
3
3
2.5
2.5
37
41
14 0-0.018
16 0-0.018
φ 6+0.030 depth 6
φ 6+0.030 depth 6
φ 82+0.0870 depth 3.3
φ 102+0.0870 depth 4.3
6 +0.030 depth 6
6 +0.030 depth 6
3-M8 depth 16P.C.D.96 (mounting screw)
3-M8 depth 16P.C.D.118 (mounting screw)
6+0
.03
06
+0.0
30
FP1
FP2
72
M E M OM E M O