VarioLED™ Flex NEXUS HD White - LED Linear...VarioLED Flex NEXUS HD White LM 79 Wxxx/ 339 LM 80...

2
VarioLED Flex NEXUS HD White LM 79 Wxxx/ 339 LM 80 L80/B10 > 60.000 h For actual data, further options and detailed information, please visit our website www.led-linear.com Up to 15 W/m no need for additional heat sinking on Al profile, more than 15 W/m VarioContour must be used to act as a heatsink. A The given data are typical values. Due to tolerances of the production process and the electrical components, values for light output and electrical power can vary up to 10%. B The position of the Tc-point is marked on each step of the LED strip. The Tc-point should be measured in thermal equilibrium according to IEC EN 60598-1. ! CRI up to 95 Color temperature HD6 HD10 HD15 HD25 HD40 low output high output lumen/meter (lm/m) A W822 2,200 K 480 770 1,390 2,280 3,590 W927 2,700 K 500 800 1,480 2,390 3,750 W930 3,000 K 520 830 1,520 2,490 3,920 W935 3,500 K 520 830 1,560 2,480 3,920 W940 4,000 K 530 850 1,580 2,540 4,000 W850 5,000 K 630 1,000 1,850 3,000 4,730 Dimensions & available lengths 9.5 mm 4.46 mm / 0.18" 4.46 mm / 0.18" 62.5 mm 1.4 mm up to 40 W/m / 12.2 up to 4,730 lm/m / 1,450 One Bin Only: 3 MacAdam up to CRI 95 8.93 mm / 0.35" 8.93 mm / 0.35" 8.93 mm / 0.35" 8.93 mm / 0.35" 8.93 mm / 0.35" 8.93 mm / 0.35" Bend direction R min = 3 cm Electrical & output data LM 79 compliant Photometric code LM 80 compliant Lifetime Step length 7 LEDs per 62.5 mm Voltage (V) 24 Volt (23 V min ; 25 V max ) CRI / R9 @ W930 95 / 85 R f / R g @ W930 95 / 100 Case Temperature B Tc min = -25°C, Tc max = 80°C Storage temperature Ts min = -30°C, Ts max = 85°C Ambient temperature Ta min = -25°C, Ta max = specific, see table below VarioLED™ Flex NEXUS HD6 HD10 HD15 HD25 HD40 Power (W/m) A 5.8 9.6 15.4 25 40 Efficacy (lm/W) A @ W850 109 104 120 120 118 max. length (m) 7.5 5 5 3 2 Watt/Reel (W) A 43.5 48 77 75 80 Number LED/Reel 840 560 560 336 224 Current 1.8 A/reel (15 mA/step) 2 A/reel (25 mA/step) 3.34 A/reel (40 mA/step) 3.12 A/reel (65 mA/step) 3.34 A/reel (105 mA/step) max. Ambient temp. (Ta max ) 50°C 50°C 45°C 40°C 35°C Project name Fixture type Specifier Date Edition: February 21, 2020

Transcript of VarioLED™ Flex NEXUS HD White - LED Linear...VarioLED Flex NEXUS HD White LM 79 Wxxx/ 339 LM 80...

Page 1: VarioLED™ Flex NEXUS HD White - LED Linear...VarioLED Flex NEXUS HD White LM 79 Wxxx/ 339 LM 80 L80/B10 > 60.000 h 5 62,5 8,93 8,93 8,93 8,93 8,93 8,93 4,46 For actual data further

VarioLED™ Flex NEXUS HD White

LM 79

Wxxx/339

LM 80

L80/B10> 60.000 h

9,5

62,5

8,93 8,93 8,93 8,93 8,93 8,93 4,46

For actual data, further options and detailed information, please visit our website www.led-linear.com

Up to 15 W/m no need for additional heat sinking on Al profile, more than 15 W/m VarioContour must be used to act as a heatsink.

A The given data are typical values. Due to tolerances of the production process and the electrical components, values for light output and electrical power can vary up to 10%.

B The position of the Tc-point is marked on each step of the LED strip. The Tc-point should be measured in thermal equilibrium according to IEC EN 60598-1.

! CRI up to 95

Color temperature

HD6 HD10 HD15 HD25 HD40

low output high output

lumen/meter (lm/m)A

W822 2,200 K 480 770 1,390 2,280 3,590

W927 2,700 K 500 800 1,480 2,390 3,750

W930 3,000 K 520 830 1,520 2,490 3,920

W935 3,500 K 520 830 1,560 2,480 3,920

W940 4,000 K 530 850 1,580 2,540 4,000

W850 5,000 K 630 1,000 1,850 3,000 4,730

Dimensions & available lengths

9.5 mm

4.46 mm /

0.18"

4.46 mm /

0.18"

62.5 mm

1.4 mm

up to 40 W/m / 12.2

up to 4,730 lm/m / 1,450

One Bin Only: 3 MacAdam

up to CRI 95

8.93 mm /

0.35"

8.93 mm /

0.35"

8.93 mm /

0.35"

8.93 mm /

0.35"

8.93 mm /

0.35"

8.93 mm /

0.35"

Bend direction Rmin = 3 cm

Electrical & output data

LM 79 compliant

Photometric code

LM 80 compliant

Lifetime

Step length 7 LEDs per 62.5 mmVoltage (V) 24 Volt (23 Vmin; 25 Vmax)

CRI / R9 @ W930 95 / 85Rf / Rg @ W930 95 / 100

Case TemperatureB Tcmin = -25°C, Tcmax = 80°C

Storage temperature Tsmin = -30°C, Tsmax = 85°CAmbient temperature Tamin = -25°C, Tamax = specific, see table below

VarioLED™ Flex NEXUS HD6 HD10 HD15 HD25 HD40

Power (W/m)A 5.8 9.6 15.4 25 40Efficacy (lm/W)A @ W850 109 104 120 120 118max. length (m) 7.5 5 5 3 2

Watt/Reel (W)A 43.5 48 77 75 80

Number LED/Reel 840 560 560 336 224

Current 1.8 A/reel (15 mA/step)

2 A/reel (25 mA/step)

3.34 A/reel (40 mA/step)

3.12 A/reel (65 mA/step)

3.34 A/reel (105 mA/step)

max. Ambient temp. (Tamax) 50°C 50°C 45°C 40°C 35°C

Project name Fixture type Specifier Date

Edition: February 21, 2020

Page 2: VarioLED™ Flex NEXUS HD White - LED Linear...VarioLED Flex NEXUS HD White LM 79 Wxxx/ 339 LM 80 L80/B10 > 60.000 h 5 62,5 8,93 8,93 8,93 8,93 8,93 8,93 4,46 For actual data further

60°

90°

0º 30°

100

200

300

VarioLEDTM Flex NEXUS HD

C0/C180 C90/C270

cd/1.000 lumen

0,30 0,35 0,40 0,45 0,50 0,550,32

0,34

0,36

0,38

0,40

0,42

0,44

Black Body Curve LED-Linear Binning ANSI Binning

4000 K

3500 K

3000 K2700 K

2200

y

x

sm403

sm353

sm303sm273

sm223

sm505

5000 K

Black Body Curve

LED Linear™ Binning

ANSI Binning

BinningC

clear diffuse

10°

60°

30°

VarioLED Flex NEXUS W9HD10 27

VarioLED Flex NEXUS W_HD_ _ _ _

VarioLED™ Flex NEXUS HD White

required optional Profiles / Optics

Accessories

For actual data, further options and detailed information, please visit our website www.led-linear.com

24 V Constant Voltage flexible LED strip with white top sur-face offering optimal reflection and 3M adhesive tape on the back. With a step measurement of 62.5 mm, a small LED pitch of 8.93 mm and a beam angle of 160°, the first choice for applications with a direct top view or low construction depths – with perfectly homogeneous light. Assembled us-ing state of the art automated Reel to Reel (R2R) production process supporting LED Linear™ Tj Away® thin flexible circuit board technology. In combination with Chip Scale Package LEDs (CSP) a thermal resistivity of 7.5 K/W is achieved for an optimal heat dissipation (junction to profile) which guar-antees an outstanding lifetime of > 60,000 hrs L80/B10. Embeds high quality LEDs with 3 step MacAdams (SDCM3)

binning centered on target CCT (One Bin Only) with an ex-tended photometric code of Wxxx/339 ensuring an excep-tional color consistency over the rated lifetime. Premium color rendition with a CRI of 95 (R9 = 85) and TM-30-15 up to Rf = 95 / Rg = 100 ensuring a remarkable light quality. Con-sistent light intensity all along the luminaire length is ob-tained thanks to active current regulation operated by dedicated integrated circuits (ICs) on each step. Protected against electrostatic discharge ± 2,000 V and polarity mis-wiring. Fully PWM dimmable for frequency > 0 Hz up to 2 kHz (flicker free for frequency higher then 1.2 kHz according to IEEE P1789 standard). Engineered and produced in Germany.

C valid for LD5, LD10; LD15, LD25 and LD40 please refer to the datasheet on www.led-linear.com

Power control systeme. g. Art.-# 17000037

Cover Clear– 15 % Lumen

Cover Diffuse– 25 % Lumen

Cover Opal– 40 % Lumen

Lenses– 12 % Lumen

Power supply unite. g. Art.-# 16000075

Cable monoe. g. Art.-# 14000030

Al profile

Your order code

Order code example

Order code

VarioContour 002 004 005 007 013 016

W x H mm (without optics) 19.5 x 15 19.5 x 19.5 19.5 x 12.5 25 x 32 20 x 10 20 x 15

Maximum electrical power (W/m) 25 W/m 40 W/m 15 W/m 40 W/m 25 W/m 40 W/m

Profiles compatible to same electrical power rating and optics (if applicable) 001, 011, 012 020 019 015

Linear optic* (clear, diffuse, 10° … 90°)

Round cover* (clear, diffuse, opal)

Low square/L2 cover* (clear, diffuse, opal)

High square cover* (clear, diffuse, opal)

Reflector* (25°, 65°, Wall washer)

Photo: Reto Marty/Natalie Plagaro Cowee

LED tape Color renderingVariant Color temperature

Please click here to configure your light line online

Edition: February 21, 2020