VALVES AEROSOL FOR ACTUATORS -...
Transcript of VALVES AEROSOL FOR ACTUATORS -...
2.0.01
ACTUATORS FOR AEROSOL VALVES
A wide range of standard actuators for aerosol valves are available to match the varying applications required.
Besides the actuators for common uses (foams, gels, liquid and viscous products, etc.) there are also actuators with special characteristics and functions.
Actuators and spray caps are listed on catalogue.
In the spray caps the central button is positioned between two higher side walls, in order to avoid accidental actuation: a protection cap is therefore no longer necessary.
Both the actuators and the spraycaps come in standard white. Different colours are available on request.
All dimensional specifications in the catalogue should be considered only for reference use.
revision: 7 30/09/2015
COSTER
2.0.02
STANDARD MICROMIST INSERTS
Prechamber
Ø O
rific
e
S
A
BPrechamber
Ø O
rific
e
S
A
B
DIRECTIONAL INSERTS STRUCTURE
F - Flat W - With Nozzle
channels
MICROMIST STRUCTURE
SPRAY CONE
N - Narrow
< 2
5°
M - Medium
25°
÷ 4
0°
L - Large
> 4
0°
Spray cone based on alcohol-butane products (50% - 50%)
Prechamber
Ø O
rific
es
H
SA
B
L
revision: 7 30/09/2015
NOTES: [ 1 ] Not applicable to 600 and 1300 series actuators and to 900 series slotted actuators.
Code Spray Orifice Orifice S Prechamber Dimens. Dimens. Standard Type Notes Cone Ø thickness Y/N Ø Thickness A B Colour
V06.205 N 0.60÷0.70 2.70 NO 4.6 1.1 Red F [ 2 ]
V06.210 N 0.80 0.70 YES 1.3 0.4 2.7 1.5 Green F [ 3 ]
V06.211 N 1.00 0.70 YES 1.3 0.4 2.7 1.5 White F [ 3 ]
V06.261 N 0.50 0.50 YES 1.2 1.4 3.3 1.4 Black W [ 4 ]
V06.263 N 0.50 0.80 YES 1.2 1.1 3.3 1.4 Sky blue W [ 4 ]
V06.264 N 0.58 0.50 YES 1.2 1.4 3.3 1.4 White W [ 4 ]
V06.268 N 0.65 0.50 YES 1.2 1.4 3.3 1.4 White W [ 4 ]
STANDARD DIRECTIONAL INSERTS
NOTES: [ 2 ] Only for V04.804 actuator [ 3 ] Only for V05.553, V05.905, V05.910, V05.1310, V05.770, V05.1770, V05.1803, V05.1843 actuators [ 4 ] Only for V05.770, V05.1770, V05.1803, V05.1843 actuators
V06.201 M 0.50÷0.60 0.60 4 0.50 x 0.50 NO 2.70 1.50 Yellow
V06.202 L 0.40 0.25 4 0.15 x 0.20 NO 2.70 1.50 Sky blue
V06.203 M 0.30 0.20 3 0.20 x 0.25 YES 0.50÷1.00 0.20 2.70 1.50 Black
V06.204 L 0.45 0.50 4 0.25 x 0.30 YES 1.6 0.60 2.70 1.30 Grey
V06.206 M 0.50 0.50 4 0.45 x 0.50 YES 1.6 0.60 3.10 1.50 Brown
V06.207 M 0.60÷0.70 1.00 4 0.45 x 0.70 NO 3.20 1.50 Sage green
V06.208 M 0.40 0.40 4 0.15 x 0.40 NO 2.70 1.50 Amaranth
V06.209 M 0.48 0.35 6 0.25 x 0.20 NO 2.70 1.85 Black [ 1 ]
V06.212 M 0.50 0.30 6 0.25 x 0.40 NO 2.70 1.65 Brown [ 1 ]
V06.213 M 0.30 0.20 3 0.20 x 0.25 YES 0.50÷1.00 0.20 2.70 2.05 White [ 1 ]
V06.215 M 0.50 1.00 2 0.45 x 0.80 NO 2.90 1.10 Yellow
V06.220 L 0.50 0.20 4 0.40 x 0.25 YES 1.2 0.35 2.70 1.90 Dark grey [ 1 ]
V06.221 M 0.60÷0.70 0.60 4 0.50 x 0.50 NO 2.70 1.50 Lilac
V06.222 L 0.50 0.30 4 0.25 x 0.30 NO 2.70 1.50 Black
V06.225 L 0.45 0.60 4 0.25 x 0.30 NO 2.70 1.50 Sage green
V06.226 M 0.50 0.30 4 0.50 x 0.50 NO 2.70 1.50 Yellow
V06.228 M 0.80 0.70 4 0.50 x 0.50 NO 2.70 1.50 Azure
V06.230 M 0.60÷0.70 1.00 4 0.35 x 0.70 NO 3.20 1.50 Red
V06.231 M 0.30 0.60 4 0.20 x 0.30 NO 2.70 1.50 White
V06.232 N 0.30 0.30 4 0.20 x 0.30 NO 2.70 1.50 Green
V06.233 M 0.40 0.60 4 0.25 x 0.30 NO 2.70 1.50 Blue
V06.234 N 0.25÷0.35 0.40 4 0.20 x 0.30 NO 2.70 1.50 Grey
V06.235 M 0.55÷0.90 0.70 4 0.25 x 0.20 NO 3.10 1.50 Black
V06.236 N 0.45÷1.00 0.80 3 0.30 x 0.30 NO 3.00 1.50 Azure
V06.237 M 0.45÷0.55 0.80 3 0.25 x 0.35 YES 1.2 0.35 3.00 1.50 Amaranth
V06.238 M 1.00 0.70 4 0.50 x 0.50 NO 2.70 1.50 Neutral
V06.239 M 0.60 0.35 6 0.25 x 0.20 NO 2.70 1.85 Ivory [ 1 ]
V06.241 M 0.35 0.25 4 0.45 x 0.50 YES 1.6 0.65 3.10 1.75 Pink [ 1 ]
V06.252 M 0.60 0.70 4 0.50 x 0.80 YES 0.60÷1.20 0.50 3.10 1.10 Red
V06.260 M 0.45÷0.55 1.00 4 0.35 x 0.70 NO 3.20 1.50 White
V06.269 M 0.40 0.35 6 0.25 x 0.20 NO 2.70 1.85 Blue [ 1 ]
V06.270 N 0.30 0.30 4 0.20 x 0.30 NO 2.70 1.50 Green
V06.271 N 0.25 0.40 4 0.15 x 0.20 NO 2.70 1.50 Red
V06.272 M 0.40 0.25 3 0.30 x 0.40 YES 0.40÷1.00 0.20 2.70 1.50 White
V06.273 M 0.28 0.25 4 0.15 x 0.10 NO 2.70 1.50 Neutral
Code
Spra
y co
ne
Orifi
ce D
iam
eter
Thic
knes
s Or
ifice
S
No. o
f cha
nnel
s
L x
H Ch
anne
ls
Prec
ham
ber
Prec
ham
ber D
iam
eter
Prec
ham
ber T
hick
ness
Dim
ensi
on A
Dim
ensi
on B
Stan
dard
Col
our
Note
s
COSTER
2.1.01
ACTU
ATOR
S
ACTUATORS
Coster manufactures a wide range of actuators of various types and sizes, suitable for most applications of aerosol products.
SERIES 1300 ACTUATORS 2.1.05For press down valves with stem Ø 3.9.
SERIES 900 ACTUATORS 2.1.06Slotted actuators for press down and tilt-action valves with stem Ø 3.9.
SERIES 500 ACTUATORS 2.1.06For press down valves with stem Ø 3.9.
SERIES 700 ACTUATORS 2.1.07For press down valves with stem Ø 3.9.
SERIES 2100 ACTUATORS 2.1.08For press down valves with stem Ø 3.9.
SERIES 2300 ACTUATORS 2.1.08For press down valves with stem Ø 3.9. Suitable for filling with actuator fitted on the valve.
SERIES 800 ACTUATORS 2.1.08For press down valves with stem Ø 3.9.
SERIES 1800 ACTUATORS 2.1.09For press down valves with stem Ø 3.9.
ACTUATORS FOR FOAM 2.1.10For press down valves with stem Ø 3.9.
ACTUATORS FOR GEL 2.1.11For press down valves with stem Ø 3.9.
revision: 9 15/07/2016
COSTER
2.1.02revision: 9 15/07/2016
OVERCAPS 2.1.12For actuators for foam and for gel.
FOAMING ACTUATORS 2.1.13For upside-down use for press down valves with stem Ø 3.9.
ACTUATORS FOR WHIPPED CREAM 2.1.14For upside-down use for press down valves with stem Ø 3.9.
SERIES 600 ACTUATORS 2.1.15For tilt-action valves with stem Ø 3.9.
SERIES 400 ACTUATORS 2.1.15For vertical spray, for press down and tilt-action valves with stem Ø 3.9.
SPECIAL ACTUATORS 2.1.16For press down and tilt-action valves with stem Ø 3.9.
ACTUATORS WITH SPECIAL INSERTS 2.1.17For press down valves with stem Ø 3.9.
ACTUATORS WITH EXTENSION TUBE 2.1.19For press down valves with stem Ø 3.9.
ACTUATORS FOR PHARMACEUTICALS 2.1.20For press down valves with stem Ø 3.9.
ACTUATORS FOR NASAL APPLICATIONS 2.1.21For standard valves or pumps with stem Ø 3.9.
SERIES 1200 ACTUATORS 2.1.23For press down valves with stem Ø 2.8.
SERIES 1400 ACTUATORS 2.1.24For press down valves with stem Ø 2.8.
ACTUATORS FOR PHARMACEUTICALS 2.1.25For press down valves with stem Ø 2.8.
ACTUATORS WITH EXTENSION TUBE 2.1.26For press down valves with stem Ø 2.8.
ASTHMA INHALERS 2.1.27For press down valves with stem Ø 2.8.
COSTER
2.1.03
ACTU
ATOR
S
revision: 9 15/07/2016
ACTUATORS FOR AUTOMATIC DISPENSERS 2.1.31For valves with stem Ø 2.8.
ACTUATORS FOR EUROSTEM VALVES 2.1.32For press down valves with eurostem Ø 3.3.
TWIST ACTUATOR 2.1.33Twist-lock actuator for press down valves with stem Ø 3.9.
CRYSTAL ACTUATOR 2.1.35Crystal actuator for press down valves with stem Ø 3.9.
ROTOR ACTUATOR 2.1.37Rotor twist-lock actuator for press down valves with stem Ø 3.9.
CAPRI ACTUATOR 2.1.39Capri actuator for press down valves with stem Ø 3.9 and eurostem Ø 3.3.
COSTER
2.1.05revision: 4
30/09/2015
VO5.1371
V05.1301, V05.1350,V05.1356
VO5.1310
SERIES 1300 ACTUATORS
VO5.1355, V05.1358,VO5.1360
FOR PRESS DOWN VALVES WITH STEM Ø 3.9
Series 1300 actuators are usually supplied fitted on the valve.
V05.1371: with micromist insert. Can use all micromist inserts described at page 2.0.02.
CODE Ø ORIFICE (mm)
V05.1301 0.50
V05.1350 1.00
V05.1356 0.85
V05.1301, V05.1350, V05.1356: actuators without insert for medium-narrow directional spray.
V05.1310: with directional insert. Can use all directional inserts described at page 2.0.02.
12.9
6.4
2.1
Ø 10.8
Ø 12
12.9
6.4
2.1
Ø 10.8
Ø 12
12.9
6.4
2.1
Ø 10.8
Ø 1212
.9
6.4
2.1
Ø 10.8
Ø 12
V05.1355, V05.1358, V05.1360: actuators without insert for narrow directional spray.
CODE Ø ORIFICE (mm)
V05.1355 0.80
V05.1358 0.65
V05.1360 1.00
2.1.06
COSTERrevision: 1 31/07/2010
V05.905
V05.945
V05.901
SERIES 900 ACTUATORS
SERIES 500 ACTUATORS
V05.551
V05.553
V05.945: without insert for directional spray. Orifice Ø 0.65 mm.
V05.901: with micromist insert. Can use all micromist inserts described at page 2.0.02.
V05.905: with directional insert. Can use all directional inserts described at page 2.0.02.
V05.551: with micromist insert. Can use all micromist inserts described at page 2.0.02.
V05.553: with directional insert. Can use all directional inserts described at page 2.0.02.
FOR PRESS DOWN AND TILT-ACTION VALVES WITH STEM Ø 3.9
Series 900 slotted actuators can be supplied fitted on the valve. Designed to be positioned in the appropriate cap.
FOR PRESS DOWN VALVES WITH STEM Ø 3.9
14.6
6.4
1.8
Ø 10.8
Ø 12
14.6
6.4
1.8
Ø 10.8
Ø 12
14.6
6.4
1.8
Ø 10.8
Ø 12
16
12
3
Ø 23
Ø 21.5
16
12
3
Ø 23
Ø 21.5
COSTER
2.1.07revision: 2
31/03/2012
SERIES 700 ACTUATORS
V05.703
V05.740, V05.760,V05.775
V05.2701
V05.770WITH EXTENSION
V05.701
Ø 17.7
15.6
Ø 22.8
12.5
6 Ø 17.7
15.6
Ø 22.8
12.5
6
Ø 17.7
15.6
Ø 22.8
10.8
6
Ø 17.7
15.6
Ø 22.8
12.0
5
6
Ø 17.7
15.6
Ø 22.8
10.8
6
8.7 L
V05.770
FOR PRESS DOWN VALVES WITH STEM Ø 3.9
V05.701: with micromist insert. Can use all micromist inserts described at page 2.0.02.
V05.703: with directional insert. Can use all directional inserts described at page 2.0.02.
V05.770: with directional insert. Can use all directional inserts described at page 2.0.02.
V05.2701: with micromist insert. With Ø 0.5 mm reduction in the stem socket. Only for BOV2 and BOV3 valves. Can use all micromist inserts described at page 2.0.02.
V05.770 WITH EXTENSION: with fitted polypropylene V06.74/L or V06.75/L extension.
CODE Ø A LENGTH ORIFICE L V06.74/10 0.80 10
V06.74/15 0.80 15
V06.75/10 1.50 10
V06.75/15 1.50 15
15.6
10.8
6
Ø 22.8
Ø 17.7
V05.740, V05.760, V05.775: without insert for directional spray.
CODE ORIFICE Ø (mm)
V05.740 0.50
V05.760 0.60
V05.775 0.75
Ø A
2.1.08
COSTERrevision: 5 31/07/2010
SERIES 2100 ACTUATORS
V05.2101: with micromist insert. Can use all micromist inserts described at page 2.0.02.
FOR PRESS DOWN VALVES WITH STEM Ø 3.9
15.6
12.2
5.5
Ø 22.8
Ø 17.7
V05.2101
SERIES 2300 ACTUATORS
FOR PRESS DOWN VALVES WITH STEM Ø 3.9
12.8
7.2
2.1
Ø 12.5
Ø 10.8
V05.2370
V05.2371
V05.2370: with micromist insert. Actuator with TDW (Tactile Danger Warning) symbol for the blind.Can use all micromist inserts described at page 2.0.02.
Series 2300 actuators are designed to be used with heads which do not use sealing gaskets. They are normally supplied already mounted on the valve.
V05.2371: with micromist insert. Can use all micromist inserts described at page 2.0.02.12
.8
7.2
2.1
Ø 12.5
Ø 10.8
SERIES 800 ACTUATORS
FOR PRESS DOWN VALVES WITH STEM Ø 3.9
V05.870: with micromist insert. Can use all micromist inserts described at page 2.0.02.
V04.804: with micromist insert. Suitable for oven cleaners.
V04.804
V05.870
Ø 19.7
20
Ø 21.6
12
1.5
Ø 19.7
20
Ø 21.6
12
1.5
COSTER
2.1.09revision: 5
31/07/2010
SERIES 1800 ACTUATORS
FOR PRESS DOWN VALVES WITH STEM Ø 3.9
V05.1801: with micromist insert. Can use all micromist inserts described at page 2.0.02. (*)
V20.60, V20.87, V20.92: overcaps. Details at page 2.1.12.
V05.1803: with directional insert. Can use all directional inserts described at page 2.0.02. (*)
V05.1803
V05.1801
Ø 26.2
23.4
14.6
5.5 6.5
Ø 34.1
Ø 32.3
Ø 26.2
23.4
14.6
5.5 6.5
Ø 34.1
Ø 32.3
(*) These actuators, if they are to be used with an aluminium mounting cup, are only compatible with the version that has a reduced external diameter (V01.47/R e V01.135/R).
V05.1841
V05.1843
V20.87
V05.1841: with micromist insert. Can use all micromist inserts described at page 2.0.02. Only for ogive-shapedaluminum cans, Ø max 40 mm. (*)
V05.1843: with directional insert. Can use all directional inserts described at page 2.0.02. Only for ogive-shapedaluminum cans, Ø max 40 mm. (*)
Ø 26.2 25
.9
17.1
8 9
Ø 34.1
Ø 32.3
Ø 26.2
25.9
17.1
8 9
Ø 34.1
Ø 32.3
V20.60 V20.92
OVERCAPS FOR SERIES 1800 ACTUATORS
2.1.10
COSTERrevision: 4 31/07/2010
ACTUATORS FOR FOAM
14.4
19.2
Ø 23.5
12.5
5
23 20
Ø 34.5
14.5
5.3
Ø 26.2
25.1
Ø 34.1
14.6
5.5 6.5
Ø 32.5
15.3
16.1
11.3
6.5
Ø 23.8
Ø 26.2
23.4
Ø 34.1
14.6
5.5
6.5
Ø 32.3
V05.963
V05.453
V05.992
V05.496
V05.967
FOR PRESS DOWN VALVESWITH STEM Ø 3.9
V05.453: actuator for foaming products. Orifice Ø 2 mm.
V05.496: actuator for foaming products. Orifice Ø 2.2 mm.
V05.992: actuator for foaming products. Orifice equivalent Ø 3 mm. (*)
V05.963: actuator for foaming products. Orifice Ø 2.4 mm. (*)
V05.967: actuator for foaming products. Orifice equivalent Ø 3 mm. (*)
(*) These actuators, if they are to be used with an aluminium mounting cup, are only compatible with the version that has a reduced external diameter (V01.47/R e V01.135/R).
COSTER
2.1.11revision: 6
31/03/2012
ACTUATORS FOR GEL
FOR PRESS DOWN VALVES WITH STEM Ø 3.9
V05.982
V05.452
V05.987
V05.983
V05.987: actuator for gel products. Orifice Ø 0.8 mm. (*)
V05.452: actuator for gel products. Orifice Ø 1.2 mm.
V05.983: actuator for gel products. Orifice Ø 1.5 mm. (*)
V05.982: actuator for gel products. Orifice Ø 0.8 mm. (*)
Ø 23.5
19.2
14.4
11.8
5
23
20
Ø 34.5
15
5.3
Ø 32.5
25.1
Ø 34.1
14.6
6.5
Ø 26.2
5.5
Ø 32.3
23.4
Ø 34.1
14.6
6.5
Ø 26.2
5.5
V05.981: actuator for gel with flow-ratereduction in the seating of the stem.Only for BOV2 and BOV3 valves. (*)
V05.981
(*) These actuators, if they are to be used with an aluminium mounting cup, are only compatible with the version that has a reduced external diameter (V01.47/R e V01.135/R).
Ø 32.3
23.4
Ø 34.1
14.6
6.5
Ø 26.2
5.5
V04.1443
V04.1443: actuator with special insert for gel products. Orifice Ø 1.8 mm.Only for 20K and 20BOV valves.
14.9
Ø 16.3
11
11.5
2.1.12
COSTER
OVERCAPS
FOR ACTUATORS SERIES 1800,ACTUATORS FOR FOAM,ACTUATORS FOR GEL
revision: 3 31/07/2010
V16.125: for V05.963 and V05.983actuators only.
V20.60: overcap with gloss surface for V05.967, V05.981, V05.982, V05.987, V05.992 and 1800 series actuators.
V20.87: overcap with gloss surface for V05.967, V05.987 and 1800 series actuators.
V20.87
V16.125
V20.60 Ø 34 25
.5
R 3.5
Ø 30.4 3.9
8
Ø 34
21.5
Ø 34
25.5
R 3.5
V20.92: overcap with satin surfacefor V05.967, V05.981, V05.982, V05.987, V05.992 and 1800 series actuators.
V20.92
COSTER
2.1.13revision: 5
31/03/2012
ACTUATORS FOR FOAM FOR UPSIDE-DOWN USE
V05.990
V05.988
V05.1984
21.2
14.1
6
5
Ø 32.5
41.5
Ø 34.1
16.6
7 8
Ø 5.5 FOR PRESS DOWN VALVES WITH STEM Ø 3.9
V05.1984: with fan spray, typical for foam household or industrial products.
V05.988: only for aluminium cans with Ø max 50 mm and ogival shoulder. Available with V20.21 or V20.26 overcap. (*)(°)
V05.990: only for aluminium cans with Ø max 53 mm and ogival shoulder. Available with V20.26 or V20.88 overcap. (*)(°)
44.3
15.2
6 8
Ø 32.5
Ø 34.1
Ø 30.5
Ø 6.5
Ø 34.5
(*) These actuators, if they are to be used with an aluminium mounting cup, are only compatible with the version that has a reduced external diameter (V01.47/R e V01.135/R).(°) If used with aluminum cans with a flat flaring, verification of proper functioning is necessary.
2.1.14
COSTERrevision: 4 31/03/2012
V05.938
V20.21
V20.26
ACTUATORS FOR WHIPPED CREAM FOR UPSIDE-DOWN USE
Ø 34
39.5
Ø 34
OVERCAPS
R = 1
R = 3.5
FOR PRESS DOWN VALVES WITH STEM Ø 3.9
V05.938: available with V20.21 or V20.26 overcaps. (*)
V20.21: overcap for V05.938, V05.988 actuators.
FOR ACTUATORS FOR FOAM AND ACTUATORSFOR WHIPPED CREAM
V20.26: overcap for V05.938, V05.988, V05.990 actuators.
42
14.6
5
Ø 32.5
Ø 12.5
Ø 35
5.3
V20.88
V20.88: overcap for V05.990 actuator.
Ø 34
44
R = 20
R = 13
(*) These actuators, if they are to be used with an aluminium mounting cup, are only compatible with the version that has a reduced external diameter (V01.47/R e V01.135/R).
39.5
COSTER
2.1.15revision: 2
31/03/2012
SERIES 600 ACTUATORS
V05.671
V05.650, V06.656
V05.658, V06.660
Ø 12
12.6
6.4
2.1
Ø 10.8
Ø 12
12.6
6.4
2.1
Ø 10.8
Ø 12
12.6
6.4
2.1
Ø 10.8
V05.622 WITH TUBE
Ø 12 12
.6
V07.9/L
6.4
L
2.1
Ø 10.8
FOR TILT-ACTION VALVES WITH STEM Ø 3.9
The series 600 actuators can be supplied fitted on the valve.
V05.671: with micromist insert. Can use all micromist inserts described at page 2.0.02.
V05.650, V05.656: actuators without insert for medium-narrow directional spray.
CODE Ø ORIFICE (mm)
V05.650 1.00
V05.656 0.85
V05.658, V05.660: actuators without insert for narrow directional spray.
CODE Ø ORIFICE (mm)
V05.658 0.65
V05.660 1.00
ACTUATOR TUBE Ø ORIFICE (mm) Ø ORIFICE (mm) 0.5 0.6
V05.622: for HD polyethylene V07.9/L tube supplied unfitted. Tube length (L) on request.
SERIES 400 ACTUATORS FOR VERTICAL SPRAY
FOR PRESS DOWN AND TILT-ACTION VALVES WITH STEM Ø 3.9
V05.417, V05.419: without insert for directional spray.
V05.416: with micromist insert. Can use all micromist inserts described at page 2.0.02.
CODE ORIFICE Ø (mm)
V05.417 0.50
V05.419 0.70
V05.416
V05.417, V05.419
Ø 6.5
21
10.5
8.3
Ø 6.5
21
10.5
8.3
Ø 24 Ø 29
Ø 24
Ø 29
2.1.16
COSTERrevision: 3 31/03/2012
SPECIAL ACTUATORS
V05.36
V05.432
FOR VALVES WITH STEM Ø 3.9
V05.432: without insert. Standard colour: red. For lubricating and de-icing locks.
V05.911
V05.911: without insert. Foaming Actuator. Only for tilt-action valves for upside-down use with 20 mm mounting cup (20TR).
20
12
2.2
Ø 25.75
Ø 11.75
15
7.2
1.8
Ø 8
Ø 5.5
32.2
12.8
7
Ø 6
Ø 17
V05.36: without insert. Slotted model for complete emptying of the can (one shot).
CODE ORIFICE Ø (mm)
V05.36/4 0.40
V05.36/9 0.90
V05.1906
V05.1906: without insert. Twin Spray Actuator with double delivery hole Ø 0.4 mm.
32.2
12.8
7
Ø 6
Ø 17
18.7
6.4
2.1
Ø 12Ø 6
V05.978
V05.978: without insert for directional spray. Only for tilt-action valves.
COSTER
2.1.17revision: 2
15/02/2015
ACTUATORS WITH SPECIAL INSERTS
V05.498
V05.498 + V07.15/L + V05.958
FOR PRESS DOWN VALVES WITH STEM Ø 3.9
V05.498: valve covering actuator with spout for inserting tubes and accessories.
V05.498 + V07.15/L + V05.958: with polypropylene V07.15/L tube and V05.958 end actuator. Tube length (L) on request. Supplied unfitted.Actuator is not suitable for pharmaceuticals applications.
19
14.6
30.8
Ø 34.5
V05.498 + V06.68/L: with polypropylene V06.68/L tube supplied fitted. Tube length (L) on request.
V16.125
Ø 30.4 3.9
8
V05.498 + V16.96
V05.498+V16.96: actuator with brush insert. Supplied unfitted.
V05.125: overcap for V05.498 actuator.
2.1.18
COSTERrevision: 2 15/02/2015
ACTUATORS WITH SPECIAL INSERTS
FOR PRESS DOWN VALVES WITH STEM Ø 3.9
V04.498/L
V04.498/L: actuator suitable for tire inflators/repair products. PVC + brass tube supplied fitted. Tube length (L) on request.
COSTER
2.1.19
ACTUATORS WITH EXTENSION TUBE
revision: 3 15/02/2015
FOR PRESS DOWN VALVES WITH STEM Ø 3.9
V05.1322: with HD polyethylene V07.9/L tube, supplied unfitted. Tube length (L) on request. Actuator can be supplied fitted on the valve. ACTUATOR ORIFICE Ø (mm) 0.5 TUBE ORIFICE Ø (mm) 0.6
V05.722: with HD polyethylene V07.9/L tube, supplied unfitted. Tube length (L) on request. ACTUATOR ORIFICE Ø (mm) 0.5 TUBE ORIFICE Ø (mm) 0.6
V05.1164 + V06.1/L: for dental use. With AISI 304 stainless steel V06.1/L tube, fitted.
TUBE VO6.1/73 73 LENGTH (mm) VO6.1/120 120
ACTUATOR ORIFICE Ø (mm) 0.4 TUBE ORIFICE Ø (mm) 1.0
V05.723: with LD polyethylene V07.12/L tube or with polypropylene V07.15/L tube. Tube supplied unfitted. Tube length (L) on request.
V07.12 ORIFICE ACTUATOR 1.0
Ø (mm) TUBE 3.6
V07.15 ORIFICE ACTUATOR 1.0
Ø (mm) TUBE 1.0
V05.1322
V05.722
V05.1164 + V06.1/L
V05.723
V05.498: with polypropylene V07.15/L tube, supplied fitted. Tube length (L) on request.Actuator is not suitable for pharmaceuticals applications.
V05.498
ACTUATOR ORIFICE Ø (mm) 2.5 TUBE ORIFICE Ø (mm) 1.0
2.1.20
COSTERrevision: 2 31/03/2012
FOR PRESS DOWN VALVES WITH STEM Ø 3.9
V05.466 + V06.59/130: supplied with V06.59/130 vaginal tube not fitted. Tube length = 130 mm. Different lengths on request.
V05.466 + V06.59/13020
.8
12.8
10.5
2
Ø 8
Ø 23
V04.2480
V04.2480: nasal actuator with internal micromist insert.
Supplied with V20.109 overcap.
ACTUATORS FOR PHARMACEUTICALS
53.4
20.6
50.8
Ø 14
24.8
Ø 23.7
38.5
COSTER
2.1.21
NASAL ACTUATOR FOR VALVES
revision: 4 30/09/2015
SALUS ACTUATOR FOR SEA-WATER SOLUTIONS FOR STANDARD VALVES OR PUMPS WITH STEM Ø 3.9 MM
12.9
Ø 23.4
17.7
Ø 5.6
39.9
Ø A Ø B
4.8
CODEØ A
(mm)Ø B
(mm)VERSION
V21.147/30/40 0.30 0.40 Adult
V21.149/25/25 0.25 0.25 Kid
V21.151/75/40 0.75 0.40 Jet
V21.151/75/75 0.75 0.75 Super Jet
V21.147 - V21.151
12.9
Ø 23.4
17.7
Ø 5.8
V21.147, V21.149, V21.151: nasal actuator suitable for KV continuous valves and all male Bag-On-valves.
Also suitable for 32MSPfine mist Spray Pump(only for 100 µl dose size).
Its ergonomic shape makes irrigation easier also for children and aged people.
Special internal insert (secure & reliable).
Limited risk of after-use bacterial contamination.
Clean Room manufacturing.
Can be Gamma-irradiated (Max 40 KGy).
All components are in EP/USP compliant material (Polyethylene HD).
Can be supplied with V20.106 translucent shaped plastic overcap unfitted.
39.9
Ø A Ø B
V21.149
2.1.22
COSTERrevision: 4 30/09/2015
NASAL ACTUATOR FOR VALVES
Ø 5.8 Ø A Ø B
Ø 23.4
17.7
39.9
Ø 5.6Ø A Ø
B
17.7
39.9
4.8
V21.148 - V21.152
SALUS ACTUATOR FOR SEA-WATER SOLUTIONS FOR FEMALE BAG-ON-VALVES (KWBFU - NKWBFU)
V21.148, V21.150, V21.152: nasal actuator suitable only for female Bag-On-valve (KWBFU - NKWBFU).
Its ergonomic shape makes irrigation easier also for children and aged people.
Special internal insert (secure & reliable).
Limited risk of after-use bacterial contamination.
Clean Room manufacturing.
Can be Gamma-irradiated (Max 40 KGy).
All components are in EP/USP compliant material (Polyethylene HD).
Can be supplied with V20.106 translucent shaped plastic overcap unfitted.
V21.150
CODEØ A
(mm)Ø B
(mm)VERSION
V21.148/30/40 0.30 0.40 Adult
V21.150/25/25 0.25 0.25 Kid
V21.152/75/40 0.75 0.40 Jet
V21.152/75/75 0.75 0.75 Super Jet
COSTER
2.1.23revision: 4
31/03/2012
SERIES 1200 ACTUATORS
V05.1253
V05.1245
V05.1271
V05.1233
14
Ø 13.9
7.8
4.6
9.9
Ø 12.65
8
4.15
9.9
Ø 14.7
8
4.15
15.5
Ø 14.7
8.2
4.6
V05.1245: with micromist insert. Can use all micromist inserts described at page 2.0.02. With silver or gold metal sheathing on request.
V05.1233: with micromist insert. Can use all micromist inserts described at page 2.0.02. With silver or gold metal sheathing on request.
FOR PRESS DOWN VALVES WITH STEM Ø 2.8
V05.1253: with micromist insert. Can use all micromist inserts described at page 2.0.02. With silver or gold metal sheathing on request.
V05.1271: with micromist insert. Can use all micromist inserts described at page 2.0.02. With silver or gold metal sheathing on request.
2.1.24
COSTERrevision: 231/03/2012
SERIES 1400 ACTUATORS
V05.1471
V05.1405
V05.149213
Ø 14
9.7
4.7
14.9
Ø 16.3
8.8
5
15.5
Ø 14.7
8.8
4.6
V05.1405: with micromist insert. Can use all micromist inserts described at page 2.0.02. With silver or gold metal sheathing on request.
V05.1492: with micromist insert. Can use all micromist inserts described at page 2.0.02. With silver or gold metal sheathing on request.
FOR PRESS DOWN VALVES WITH STEM Ø 2.8
V05.1471: with micromist insert. Can use all micromist inserts described at page 2.0.02. With silver or gold metal sheathing on request.
Series 1400 actuators are not suitable for metered dose valves.
COSTER
2.1.25
ACTUATORS FOR PHARMACEUTICALS
V05.497
FOR PRESS DOWN VALVES WITH STEM Ø 2.8
V05.497: nasal actuator without insert. Can be supplied with the V16.46 overcap.
V05.29
17.5
Ø 24
19.3
43.6
9.8 14
.5
Ø 13.5
9.5
V05.31
revision: 730/04/2013
8.2 14
.5
Ø 13.5
V05.6
V05.31: foaming actuator.
V05.6: directional actuator.
V05.29: foaming actuator. For 20D and 32D valves.
8.2 14
.5
Ø 13.5
9.5
2.1.26
COSTER
ACTUATORS FOR PHARMACEUTICALS
FOR PRESS DOWN VALVES WITH STEM Ø 2.8
V05.1278: throat-spray products actuator with micromist insert.
V05.447 + V06.59/130: supplied with V06.59/130 vaginal tube not fitted. Tube length = 130 mm. Different lengths on request.
20.8
12.8
8.8
2
Ø 8
Ø 23
V05.27
V05.26 + V06.1/L
V05.27: with HD polyethylene V07.9/L tube, supplied unfitted. Tube length (L) on request.
ACTUATORS WITH EXTENSION TUBE
FOR PRESS DOWN VALVES WITH STEM Ø 2.8
V05.26 + V06.1/L: with AISI 304 stainless steel fitted tube. For dental use.
V05.1278
V05.447 + V06.59/130
60
14.5
18.1
23
Ø 24
TUBE VO6.1/73 73 LENGTH (mm) VO6.1/120 120
revision: 5 31/03/2012
COSTER
2.1.27revision: 2
31/03/2012
ASTHMA INHALERS
FOR PRESS DOWN VALVES WITH STEM Ø 2.8 & Ø 3.18
2-PIECE ASTHMA INHALER FOR METERING VALVES
V05.1227: FOR 20DR VALVEV05.1280: FOR 20DPH VALVE
Actuator supplied with V20.94 protective cap.
Different spray holes available for HFA or CFC propellants;
Color code according to formulation or customer requirements.
Can be customized with company logo.
Ergonomic design.
V05.1227 / V05.1280 + V20.94
26.7
57.5
74.8
30.7
19.1 X 27.4
14.9
13.5
14.6 X 22.8
2.1.28
COSTER
ASTHMA INHALERS
FOR PRESS DOWN VALVES WITH STEM Ø 2.8 & Ø 3.18
revision: 1 31/03/2012
V05.1296 / V05.1297 + V20.101
2-PIECE ASTHMA INHALER FOR METERING VALVES
V05.1296: FOR 20DR VALVEV05.1297: FOR 20DPH VALVE
Actuator supplied with V20.101 protective cap.
Different spray holes available for HFA or CFC propellants;
Color code according to formulation or customer requirements.
Can be customized with company logo.
Ergonomic design.
27.7 X 29.9
57.9
75
27.6
15.6
13.4
16.3 X 23.4
19.9 X 28.4
COSTER
2.1.29revision: 1
31/03/2012
ASTHMA INHALERS
FOR PRESS DOWN VALVES WITH STEM Ø 2.8
V05.1256 + V20.93
2-PIECE ASTHMA INHALER FOR METERING VALVES
V05.1256: FOR 20DR VALVE
Actuator supplied with V20.93 protective cap.
Different spray holes available for HFA or CFC propellants;
Color code according to formulation or customer requirements.
Ergonomic design.
44.5
56.3
74.9
Ø 3
27.4 13.5 29.7
16.4
26.7
23.5
67.0
Ø A
2.1.30
COSTER
ASTHMA INHALERS
FOR PRESS DOWN VALVES WITH STEM Ø 2.8
revision: 2 31/03/2012
V05.23 + V16.289
V05.23 + V16.1
V05.23: inhaler actuator. Can be supplied with the V16.1 or V16.289 overcap.
7
Ø 2
8.3
19.6
38.7
16.6
23
Ø 24.5
Ø 2
4.5
19.6
10.2
38.7
16.6
23
Ø 24.5
Ø 2
6.1
Ø 2
4.5
COSTER
2.1.31revision: 5
20/07/2016
ACTUATORS FOR AUTOMATIC DISPENSERS
V05.962
V04.972
11
3.6
6.9
7.5
14 2.5
2
FOR VALVES WITH STEM Ø 2.8
V05.962: actuator for automatic dispensers.
3.8
12
17
6.6 6.6
V04.972: actuator with insert for automatic dispensers.
2.1.32
COSTERrevision: 7 15/07/2016
ACTUATORS FOR EUROSTEM VALVES
V05.1770WITH EXTENSION
V05.1771
V05.893
V05.1770
V05.1771: with micromist insert. Can use all micromist inserts described at page 2.0.02.
V05.1770: with directional insert. Can use all directional inserts described at page 2.0.02.
FOR PRESS DOWN VALVES WITH EUROSTEM Ø 3.3
V05.893: foaming actuator.
V05.1770 WITH EXTENSION: with polypropylene V06.74/L or V06.75/L fitted extension.
CODE Ø A LENGTH ORIFICE L V06.74/10 0.80 10
V06.74/15 0.80 15
V06.75/10 1.50 10
V06.75/15 1.50 15
15.6
11.2
6
Ø 22.8
Ø 17.7
15.6
10.5
6
Ø 17.7
Ø 22.8
15.6
10.5
6
L 8.7
Ø 17.7
Ø 22.8
Ø A
19.2
12.2
5
14.4
Ø 23.5
V05.1871
V05.1873
V05.1871: with micromist insert. Can use all micromist inserts described at page 2.0.02. Can use overcaps(see page 2.1.12). (*)
V05.1873: with directional insert. Can use all directional inserts described at page 2.0.02. Can use overcaps(see page 2.1.12). (*)
23.4
13.4
6.5
Ø 26.2
Ø 34.1
Ø 32.3
5.5
23.4
13.4
6.5
Ø 26.2
Ø 34.1
Ø 32.3
5.5
(*) If intended for use with an aluminum mounting cup, these actuators are only compatible with the version that has a reduced external diameter (V01.47/R and V01.135/R).
COSTER
2.1.33revision: 4
31/03/2012
TWIST ACTUATOR
TWIST-LOCK ACTUATOR FOR PRESS-DOWN VALVESWITH STEM Ø 3.9
V21.94 V21.99
25.4
14.7
8.2
Ø 34.5
Ø 33.9
5.5
25.4
14.7
8.2
Ø 34.5
Ø 33.9
5.5
V21.94: actuator with micromist insertand tamper-tag (Warranty Seal).Can use all micromist inserts describedat page 2.0.02, except V06.252. (*)
V21.99: actuator with directional insertand tamper-tag (Warranty Seal).Can use all directional inserts describedat page 2.0.02. (*)
(*) If intended for use with an aluminum mounting cup, these actuators are only compatible with the version that has a reduced external diameter (V01.47/R and V01.135/R).
V21.120: actuator with micromist insertand without tamper-tag (Warranty Seal).Can use all micromist inserts describedat page 2.0.02, except V06.252. (*)
V21.121: actuator with directional insertand without tamper-tag (Warranty Seal).Can use all directional inserts describedat page 2.0.02. (*)
V21.120V21.121
2.1.34
COSTERrevision: 4 31/03/2012
TWIST ACTUATOR
SECURITY LOCK-UNLOCK POSITION
UNLIMITED COLOUR COMBINATIONS
Twist is a valve-cover actuator suitable for both aluminum and tin-plate cans.
Twist incorporates the twist-lock closure system, which prevents accidental use of the actuator:actuator can be pressed only after rotation.
Two versions are available: with or without additional tamper-tag (Warranty Seal).
From the top:
- the version without additional tamper-tag;
- the version with the additional tamper-tag;
- close-up of the tamper-tag.
This highly visible Warranty Seal, located at the back of the actuator,must be removedbefore using the actuator.
The visible tamper-tag is available only for V21.94 and V21.99 versions.
Both the rotation block ring and the actuator key can be produced in any numberof different opaque or translucent colours.
The actuator is available in both micromist insert and directional insert versions.
The former is suitable for alcohol-based deodorants, sun-sprays, hair sprays and similar products; the latter is suitable for products containing components in suspension, such as anti-perspiration deodorants (AP), dry shampoos and so on.
COSTER
2.1.35revision: 2
15/02/2015
CRYSTAL ACTUATOR
CRYSTAL ACTUATOR FOR PRESS-DOWN VALVESWITH STEM Ø 3.9
V21.112
V21.113
V21.112: Crystal spray actuator with micromist insert, suggested for aluminium cans with ogival shouder, Ø max 53 mm. Can use all micromist inserts described at page 2.0.02.
V21.113: Crystal anti-perspirant actuator with directional insert, suggested for aluminium cans with ogival shouder, Ø max 53 mm. Can use all directional inserts described at page 2.0.02.
27.4
15.9
7.5
Ø 34.1
Ø 32
6.5
27.4
15.9
7.5
Ø 34.1
Ø 32
6.5
2.1.36
COSTERrevision: 2 15/02/2015
CRYSTAL ACTUATOR
FEATURES
UNLIMITED COLOUR COMBINATIONS
Crystal is a actuator in a spray version and a directional version for deodorants.
In terms of styling, the Crystal actuator features a transparent crystaline cover with the activation zone protected by an unbreakable seal.
The finished article is thus a single unit, both practical and available for immediate use, with no need for a protective cap.
Both the actuator key and cover can be pro-duced in any number of different translucent colours.
The actuator is available in both micromist insert and directional insert versions.
The former is suitable for alcohol-based deodorants; the latter is suitable for products containing components in suspension, such as anti-perspiration deodorants (AP).
COSTER
2.1.37revision: 2
30/09/2015
ROTOR ACTUATOR
ROTOR TWIST-LOCK ACTUATOR FOR PRESS-DOWN VALVESWITH STEM Ø 3.9
V21.127
V21.128
V21.127: Rotor spray actuator with micromist insert, suggested for aluminium cans with ogival shouder, Ø max 53 mm. Can use all micromist inserts described at page 2.0.02 except V06.252.
V21.128: Rotor anti-perspirant actuator with directional insert, suggested for aluminium cans with ogival shouder, Ø max 53 mm. Can use all directional inserts described at page 2.0.02.
26
15.7
10.5
Ø 34.5
Ø 33.85
6.5
26
15.7
10.5
Ø 34.5
Ø 33.85
6.5
26
15.7
10.5
Ø 34.5
Ø 33.85
6.5
26
15.7
10.5
Ø 34.5
Ø 33.85
6.5
These actuators are not suitable for KPM and RKRA type valves (long stroke).
2.1.38
COSTERrevision: 2 30/09/2015
ROTOR ACTUATOR
FEATURES
UNLIMITED COLOUR COMBINATIONS
Rotor is a new snap-on 1” valve actuatorwith twist-locking mechanism.
The rotating closure ring thatsignals “locked!” with an audible click,and has two ribbed areas foran ergonomic feel and easy turning.
The finger pad sits below the twistcollar to avoid accidental actuationand to ensure high top-load resistance.
The actuator snaps on over the 1” valvemounting cup and is designed to fit moststandard size aluminum and tinplate cans.
Rotor is particularly suitable for usewith ogival shoulder aluminum cans.
Rotor is developed for diverse productapplications such as sunscreens,topical sprays, deodorant and A/P sprayproducts; it is usable with most Costerstandard inserts.
Both the rotation closure ring and the actuatorkey can be produced in any numberof different opaque or translucent colours.
The actuator is available in both micromist insert and directional insert versions.
The former is suitable for alcohol-baseddeodorants, sun-sprays, hair sprays and similar products; the latter is suitablefor products containing componentsin suspension, such as anti-perspirationdeodorants (AP), dry shampoos and so on.
COSTER
2.1.39revision: 0
15/02/2015
CAPRI ACTUATOR
CAPRI ACTUATOR FOR PRESS-DOWN VALVESWITH STEM Ø 3.9AND EUROSTEM Ø 3.3
V21.143, V21.145
V21.144, V21.146
Capri spray actuator with micromist insert and overcap. Suggested for aluminium can with ogival shoulder, Ø max 45 mm. Can use all Coster micromist inserts, except V06.252. The overcap can have two different surfaces: glossy or matt.
27
17.6
3
Ø 36
8.3
V21.143: version for valves with stem Ø 3.9.
V21.145: version for valves with eurostem Ø 3.3.
Capri anti-perspirant actuator with directional insert and overcap. Suggested for aluminium can with ogival shoulder, Ø max 45 mm.Can use all Coster directional inserts.The overcap can have two different surfaces: glossy or matt.
V21.144: version for valves with stem Ø 3.9.
V21.146: version for valves with eurostem Ø 3.3.
32
27
16.2
5
3
Ø 36
8.3
32
27
17.6
3
Ø 36
8.3
32
27
16.2
5
3
Ø 36
8.3
32
2.1.40
COSTERrevision: 0 15/02/2015
CAPRI ACTUATOR
FEATURES
UNLIMITED COLOUR COMBINATIONS
Capri is a two piece spray actuator with overcap suitable for 1’’ male aerosol valves.
It consists of a finger pad with integrated spray channel, conveniently fitted within the collar.
The finger pad is ergonomically designed with ribbed finish for an easy and comfortable actuation.
OvercapCapri is also equipped with an overcap, available either with matt or glossy surface.
ApplicationsCapri is suitable for a wide range of products such as deodorants (both DEO and AP), cosmetics, sunscreens, pharmaceuticals and households; it can be equipped with most Coster standard inserts.
Capri has a universal and unisex look which makes it easy to adapt and customize to a variety of products.
Finger pad, collar and overcap can all be supplied in any colour, allowing unlimited combinations.
COSTER
2.2.01
SPRA
Y CA
PSSPRAY CAPS
SPRAY CAPS FOR TIN PLATE CANS 2.2.03Spray caps for necked-in tin plate cans for press down valves with stem Ø 3.9.
SPRAY CAPS FOR VARIOUS CANS 2.2.04Spray caps for various cans for press down valves with stem Ø 3.9.
SPRAY CAPS FOR VERTICAL SPRAY 2.2.04Spray caps for vertical use for soft-touch valves with eurostem Ø 3.3.
ORBIT SPRAY CAP 2.2.05Spray cap for Ø 45, 49, 52 necked-in tin plate cans,Ø 45, 50, 53 Cebal Transfer alu-cans; for press down valves with stem Ø 3.9.
SFERA SPRAY CAP 2.2.07Spray cap for Ø 52 necked-in tin plate cans, Ø 53 Cebal Transfer alu-cans and BOV dual compartment sistem valve.
NASH SPRAY CAP 2.2.09Spray cap for Ø max 50 transfer aluminium cans for press down valves with stem Ø 3.9.
HYDRA SPRAY CAP 2.2.11Spray cap for Ø 57 necked-in tin plate cansfor press down valves with stem Ø 3.9.
DOLOMITE SPRAY CAP 2.2.13Spray cap for Ø 49 necked-in tin plate cansfor press down valves with eurostem Ø 3.3.
revision: 715/07/2016
COSTER
2.2.02
Ø Nominal D1 D2 H2 H5 C
45 43.60 45.20 5.60 5.30 2.90
49 47.80 49.30 7.00 5.50 2.90
52 50.70 52.70 8.00 5.60 3.20
57 55.50 57.60 9.50 6.00 3.30
65 63.20 65.90 13.50 6.30 3.30
H 2 ± 0
,4D2 ± 0,3
D1 ± 0,3
C ±
0,1
5
H 5
+ 0
,5
- 0
NECKED-IN CAN DIMENSIONSAS PER EN 15007 (EX FEA 214 E) SPECIFICATIONS
HINGED TUBE-HOLDER INSERTSUITABLE FOR ALL SPRAY CAPS
12,5
V16.225/224 hinged tube-holder insert with polypropylene V07.15/L tube, supplied fitted from 100 mm to 160 mm length. Other length on request (tube supplied unfitted).
Insert supplied separately from the spray cap.
Below, detail of the insert; right, the tube seat insert with the tube fitted.
revision: 7 15/07/2016
COSTER
2.2.03revision: 1
31/03/2012
SPRAY CAPS FOR TIN PLATE CANS
V17.18, V17.19, V17.20, V17.22, V17.26
B
A
V17.24, V17.25
B
A
FOR PRESS DOWN VALVESWITH STEM Ø 3.9
V17.18, V17.19, V17.20, V17.22, V17.26: spraycap with micromist insert for necked-in tin plate cans. Available in different dimensions for cans of varying diameters. Can use all micromist inserts described at page 2.0.02.
CODE CAN A B Ø mm
V17.18 45 31 45
V17.19 52 33 47
V17.20 57 33 47
V17.22 49 33 47
V17.26 65 38 52
Can dimension at page 2.2.02.
V17.24, V17.25: spraycap with micromist insert for necked-in tin plate cans. Available in different dimensions for cans of varying diameters. Can use all micromist inserts described at page 2.0.02.
CODE CAN A B Ø mm
V17.24 49 27.2 41.2
V17.25 52 30.5 44.5
V17.52, V17.53, V17.59
A
B
CODE CAN A B Ø mm
V17.52 49 23.6 42.4
V17.53 52 25.0 45.0
V17.59 57 27.2 49.0
V17.52, V17.53, V17.59: spraycap with micromist insert for necked-in tin plate cans. Available in different dimensions for cans of varying diameters. Can use all micromist inserts described at page 2.0.02.
2.2.04
COSTERrevision: 3 15/07/2016
SPRAY CAPS FOR TIN PLATE CANS
V17.70, V17.71
FOR PRESS DOWN VALVESWITH STEM Ø 3.9
V17.70, V17.71: spraycap with micromist insert for necked-in tin plate cans. Available in different dimensions for cans of varying diameters. Can use all micromist inserts described at page 2.0.02.
A
SPRAY CAPS FOR VERTICAL SPRAY
FOR SOFT-TOUCH VALVES WITH EUROSTEM Ø 3.3
V18.62: monobloc spray cap for necked-in Ø 52 tin plate cans. Suitable only for soft-touch valves with short stroke and reduced activation pressure type KEN (eurostem Ø 3.3). No micromist insert is needed.
V18.62
47
26
Ø 52
SPRAY CAPS FOR ALUMINIUM CANS Ø 35
FOR PRESS DOWN VALVESWITH STEM Ø 3.9
V17.31: spraycap with micromist insert for aluminium cans Ø 35. Can use all micromist inserts described at page 2.0.02.
V17.31
36
22
Ø 34.3
CODE CAN A B Ø mm
V17.70 52 35.5 50.0
V17.71 57 34.2 50.0
B
COSTER
2.2.05revision: 4
31/03/2012
ORBIT SPRAY CAP
FOR PRESS DOWN VALVESWITH STEM Ø 3.9
V21.85, V21.86, V21.92: Orbitspray cap with micromist insert for necked-in tin plate cans and Cebal Transfer alu-cans. Can use all micromist inserts described at page 2.0.02.
V21.93, V21.95, V21.96: Orbit spray cap with directional insertfor necked-in tin plate cans and Cebal Transfer alu-cans. Can use all directional inserts described at page 2.0.02.
V21.97, V21.98, V21.106, V21.107: Orbit spray caps for gel and for foam. Available for necked-in tin plate cans and Cebal Transfer alu-cans. Flow-rate reduction in the seatingof the stem, with Ø 1.0 mm orifice.
V21.93, V21.95, V21.96
V21.97, V21.98, V21.106, V21.107
V21.85, V21.86, V21.92
C
A
B
Ø
C
A
B
Ø
C
A
B
Ø
ORBIT with micromist insert
CODEØ CAN (mm)
A B CTIN PLATE ALUMINUM
V21.92 45 45 43.4 21.6 33.8
V21.85 49 50 47.2 23.4 36.8
V21.86 52 53 47.2 23.4 38.1
ORBIT with directional insert
CODEØ CAN (mm)
A B CTIN PLATE ALUMINUM
V21.93 45 45 43.4 21.6 33.8
V21.95 49 50 47.2 23.4 36.8
V21.96 52 53 47.2 23.4 38.1
ORBIT gel
CODEØ CAN (mm)
A B CTIN PLATE ALUMINUM
V21.97 49 50 47.2 23.4 36.8
V21.98 52 53 47.2 23.4 38.1
ORBIT foam
CODEØ CAN (mm)
A B CTIN PLATE ALUMINUM
V21.106 49 50 47.2 23.4 36.8
V21.107 52 53 47.2 23.4 38.1
2.2.06
COSTERrevision: 4 31/03/2012
ORBIT SPRAY CAP
VISIBLE TAMPER-TAG
UNLIMITED POSSIBILITIES OF COLOUR COMBINATIONS
To meet customer demand, Orbit spray cap is fitted with a newly-developed and visible tamper-tag (guarantee seal)on the rear side of the finger pad.
The spray-channel presents an oval finger pad, together with an oval spray nozzle front: the name Orbit arises from these oval designs.
The separate arrangement of spray-channel finger pad and outer cap offers unlimited possibilities to combine different colours.
To satisfy the increased demand for transparent and trans-lucent colour variations and to ensure transparency, the core of the mould is polished.
COSTER
2.2.07revision: 3
15/02/2015
SFERA SPRAY CAP
FOR PRESS DOWN VALVESWITH STEM Ø 3.9
Can dimension at page 2.2.02.
V31.28
V31.28: Sfera spray cap for gel with protection overcap V20.103.Suitable for necked-in Ø 52 mm tin plate cans and Cebal Transfer Ø 53 mm alu-cans with BOV valves.Orifice Ø 0.8.
V31.36
40
25
10
Ø 52
V31.29
40
25
10
Ø 52 40
25
10
Ø 52
V31.30
58
33.7
11
.5
Ø 57
V31.30: Sfera spray cap for foam with protection overcap V20.107.Suitable for necked-in Ø 57 mm tin plate cans. Orifice Ø 2.2.
V31.29: Sfera spray cap for foam with protection overcap V20.103.Suitable for necked-in Ø 52 mm tin plate cans and Cebal Transfer Ø 53 mm alu-cans. Orifice equivalent Ø 3.1.
V31.36: Sfera spray cap for gel with protection overcap V20.103.Suitable for necked-in Ø 52 mm tin plate cans and Cebal Transfer Ø 53 mm alu-cans with BOV female valve. Orifice Ø 0.8.
2.2.08
COSTERrevision: 3 15/02/2015
SFERA SPRAY CAP
SFERA STANDARD SPRAY CAPFOR FOAM AND GELSfera spray cap, a member of the vast family of Coster spray caps and actuators,is a very efficient actuator available in two versions, for foam and for gel.
Both of these actuators are equipped with a protection overcap to avoid accidental actuation.
COSTER
2.2.09revision: 0
30/04/2015
NASH SPRAY CAP
FOR PRESS-DOWN VALVESWITH STEM Ø 3.9
V31.8
V31.8: spray actuator with micromist insert and protection overcap V20.83.Suitable for transfer aluminium cansØ max 50 mm. Can use all micromist inserts described at page 2.0.02.
28
44
Ø 46
4
V31.11: anti-perspirant actuator with directional insert and protectionovercap V20.83. Suitable for transfer aluminum cans Ø max 50 mm. Can use all directional inserts described at page 2.0.02.
V31.11
28
44
Ø 46
4
V31.9
V31.9: actuator for gel with protection overcap V20.83. Suitable for transfer aluminum cans Ø max 50 mm. Orifice Ø 1.5.
28
44
Ø 46
4
2.2.10
COSTERrevision: 0 30/04/2015
NASH SPRAY CAP
V20.83: protection overcap.
V20.83
40
Ø 45.7
V31.10: actuator for foam with protection overcap V20.83. Suitable for transfer aluminum cans Ø max 50 mm. Orifice Ø 2.0.
V31.10
28
44
Ø 46
4
COSTER
2.2.11revision: 4
30/04/2015
HYDRA SPRAY CAP
FOR PRESS DOWN VALVESWITH STEM Ø 3.9
V17.74
V17.66
V17.74: Hydra spray cap with micromist insert; suitable for necked-in Ø 57 mm tin plate cans. Can use all micromist inserts described at page 2.0.02.
V17.66: Hydra spray cap with directional insert; suitable for necked-in Ø 57 mm tin plate cans. Can use all directional inserts described at page 2.0.02.
V18.75: Hydra spray cap without insert,for directional spray (Ø orifice: 0.7 mm);suitable for necked-in Ø 57 mm tin plate cans. For insecticide sprays.
50
32
28
Ø 57
50
32
28
Ø 57
V18.75
50
32
28
Ø 57
2.2.12
COSTERrevision: 4 30/04/2015
HYDRA SPRAY CAP
HYDRA SPRAY CAP FOR INSECTICIDES AND HOUSEHOLD PRODUCTSHydra spray cap is a standard spray cap specifically developed for household and insecticideproducts.
It is produced in a wide range of colours.
Hydra is available in two different versions: two-piece (with micromist insert) and single-piece (with directional hole).
COSTER
2.2.13revision: 0
15/07/2016
DOLOMITE SPRAY CAP
FOR PRESS-DOWN VALVESWITH EUROSTEM Ø 3.3
V21.153
V21.153: spray cap with micromist insert and slider for lock-unlock mechanism.Suitable for necked-in Ø 49 mm tin plate cans. Can use all micromist inserts described at page 2.0.02.25
.5
52.2
Ø 49
V21.154: anti-perspirant cap with directional insert and slider for lock-unlock mechanism. Suitable for necked-in Ø 49 mm tin plate cans. Can use all directional inserts described at page 2.0.02.
V21.154
31.2
25.5
52.2
Ø 49
31.2
2.2.14
COSTERrevision: 0 15/07/2016
DOLOMITE SPRAY CAP
FEATURES Dolomite is a two piece spray cap suitable for 1” male aerosol valves.
It consists of a cap with integrated actuator and a slider.
The slider is ergonomically shaped and activates the lock - unlock mode of the spray cap. The “lock-unlock” writing on the slider helps user to identify the open or close position.
APPLICATIONS Dolomite is suitable for a wide range of products using a micromist or directional insert and is particularly suitable for deodorants and cosmetics.
UNLIMITED COLOURCOMBINATIONS Dolomite can be supplied either in a unique colour combination or using different colours for the cap and the slider, making it easy to adapt and customize to a variety of products.