valbart flowserve
2
2 - Headquarters 3 - Warehouse THE ART OF MAKING VALVES Valbart Srl was founded in 2003 under the name Velan Italy. Since then, the company has witnessed tremendous growth and has been recognized as the fastest growing firm in its sector. The important and highly ambitious decision of a management buy-out taken by the President, Mr. Roberto Bartolena and his team of executives led to the acquisition of all the shares previously owned by Velan Inc. and a change of name to Valbart Srl. Valbart Srl specializes in designing and manufacturing API 6A and API 6D Trunnion Mounted ball and API 6D Gate Valves and is driven by constant innovation to increase its existing range of products. Apart from being one of the leading suppliers of TMBV, Valbart Srl is also recognized for its production of Cryogenic valves, Depressurizing Plus valves, DBB valves and Through Conduit Gate valves. The technical know-how, design and experience in producing TMBV’s are Valbart’s strongest assets. The company seeks to improve and build on these assets. The employment of highly talented and experienced professionals in key technical management positions is the proof of the Company’s commitment to a continuous improvement. With a highly equipped facility distributed in three buildings with a total internal area of 14000 sqm (150,000 sq. ft), Valbart Srl aims at continuing to produce and provide valves of the highest quality and with a growth reflecting the one experienced so far. COMPANY PROFILE Certification & Approvals •ISO 9001 •PED •API 6D & 6A •API 6D SS •TA-LUFT •SIL 3 •ATEX •Firesafe as per API 6FA, API 607, ISO 10497 •Major end user approvals VALBART FACILITIES & TESTING Facility testing rig 36-64” (900-1600mm). Valbart continuously expanding inventory. A horizontal boring mill in operation. © 2010 Valbart Srl - All Rights Reserved. 1 - Production Valbart S.r.l. Via delle Industrie, 9/5 20050 Mezzago (Milan) ITALY [email protected] Phone: +39 039 624111 Fax: +39 039 6241178 www.valbart.com S. Giridhar S-201, 2ND FLOOR, KANISHKA COMPLEX D.D.A. MARKET MAYUR VIHAR PH-1, EXTN 110091 DELHI [email protected] Phone: : +91 11 22719473 Fax: +91 11 22795919 Keith Whittaker DUBAI - UAE [email protected] Mobile: 971 505597501 Marcello Pedani SINGAPORE [email protected] Mobile (Singapore): +65 96552235 Mobile (Korea): +82 1190650748 Marco Tassotto 14215 Westfair West Houston, TX 77041 [email protected] Mobile: +1 281 851 6828 +39 346 1375324 HEADQUARTERS SALES AND WAREHOUSING WORLD SALES OFFICES MIDDLE EAST ASIA & PACIFIC RIM INDIA Bruce Logan VALVE 4 U Ltd 9 Drummers Dell, Forfar, Angus, Scotland [email protected] [email protected] Phone: +44 01307 461659 Mobile: +44 07809 869718 UK & NORTH SEA Valbart USA Trunnion Mounted Ball Valves API 6D & 6A THE ART OF MAKING VALVES
-
Upload
jorge-beltran -
Category
Documents
-
view
166 -
download
8
Transcript of valbart flowserve
2 - Headquarters
3 - Warehouse
THE ART OF MAKING VALVES
Valbart Srl was founded in 2003 under the name Velan Italy. Since then, the company has witnessed tremendous growth andhas been recognized as the fastest growing firm in its sector. The important and highly ambitious decision of a managementbuy-out taken by the President, Mr. Roberto Bartolena and his team of executives led to theacquisition of all the shares previously owned by Velan Inc. and a change of name to Valbart Srl.Valbart Srl specializes in designing and manufacturing API 6A and API 6D Trunnion Mounted ball andAPI 6D Gate Valves and is driven by constant innovation to increase its existing range of products.Apart from being one of the leading suppliers of TMBV, Valbart Srl is also recognized for its productionof Cryogenic valves, Depressurizing Plus valves, DBB valves and Through Conduit Gate valves. The technical know-how, design and experience in producing TMBV’s are Valbart’s strongest assets. The company seeks to improve and build on these assets. The employment of highly talented andexperienced professionals in key technical management positions is the proof of the Company’scommitment to a continuous improvement. With a highly equipped facility distributed in three buildingswith a total internal area of 14000 sqm (150,000 sq. ft), Valbart Srl aims at continuing to produce andprovide valves of the highest quality and with a growth reflecting the one experienced so far.
COMPANY PROFILE
Certification& Approvals
•ISO 9001•PED•API 6D & 6A •API 6D SS•TA-LUFT•SIL 3•ATEX•Firesafe as per
API 6FA, API 607, ISO 10497
•Major end userapprovals
VALBART FACILITIES & TESTING
Facility testing rig 36-64” (900-1600mm). Valbart continuously expanding inventory. A horizontal boring mill in operation.
© 2
010 V
alb
art
Srl
- A
ll R
igh
ts R
ese
rved
.
1 - Production
Valbart S.r.l.Via delle Industrie, 9/520050 Mezzago (Milan) ITALY
[email protected]: +39 039 624111Fax: +39 039 6241178
www.valbart.com
S. GiridharS-201, 2ND FLOOR, KANISHKA COMPLEXD.D.A. MARKETMAYUR VIHAR PH-1, EXTN 110091 [email protected]: : +91 11 22719473Fax: +91 11 22795919
Keith WhittakerDUBAI - UAE
[email protected]: 971 505597501
Marcello PedaniSINGAPORE
Mobile (Singapore):+65 96552235
Mobile (Korea):+82 1190650748
Marco Tassotto14215 Westfair WestHouston, TX 77041
Mobile:+1 281 851 6828+39 346 1375324
HEADQUARTERS SALES AND WAREHOUSING
WORLD SALES OFFICES
MIDDLE EAST ASIA & PACIFIC RIM INDIA
Bruce LoganVALVE 4 U Ltd9 Drummers Dell, Forfar,Angus, Scotland
[email protected]@valve4u.co.uk
Phone: +44 01307 461659Mobile: +44 07809 869718
UK & NORTH SEAValbart USA
Trunnion Mounted Ball Valves API 6D & 6A
THE ARTOF MAKING
VALVES
API 6A STANDARD MATERIALS LISTSEAT
INSERT
Nylon
Viton
Nylon 6
PTFE
PCTFE
Other
B7/2H
L7/Gr.7
B8M/Gr. 8M
F51
Other
F6A
AISI 410
F304
F316
Gr.630
Duplex
Incoloy
Monel
Special
LF2, F6
F304
F316
Duplex
Incoloy
Monel
Special
A105N
LF2
F304
F316
Duplex
Incoloy
Monel
Special
BODY BALL STEM BOLTS/NUTS
• WELDED BODYMod. VW1
No leak path through the body.
• SIDE-ENTRYMod. VB2 and VB3
The Side-Entry design is the most popular.
• TOP-ENTRYMod. VT1
Top-Entry design for easy in-line maintenance.
API2000-3000
1–3625–900
API50001–36
25–900
API100001–24
25–600
API150001–12
25–400
SIZE (in/mm) - PRESSURE RANGE
API 6D
ASME150-600
1–6425–1600
ASME9001–56
25–1400
ASME15001–40
25–1000
ASME25001–32
26–800
SIZE (in/mm) - PRESSURE RANGE
SERVICES• Standard Application• Low Temperature -46°C• Cryogenic down to -196°C• Sub-Sea• Underground• Off-Shore• High Temperature• Oil & Gas Transportation• Gas Compressor Station• Liquefied Natural Gas
Handling and Transportation
ACTUATIONHand operated valves are suppliedeither with lever or gear operator.
Gear box is used for valvesizes from:
2” (50 mm) Class 25003” (80 mm) Class 15004” (100 mm) Class 6006” (150 mm) Class 150 & 300
Actuated valves supplied with:Electric, Pneumatic, Hydraulic, Gas over Oil Actuators.
Cryogenic testing on an 8” (200 mm) Class 300 valve.
View of the Valve Automation Centre (VAC),approved by Top End User
Main gas line with bypass valves. Top-Entry valve with actuator.
Subsea valve.
TRUNNION-MOUNTED BALL
SELF-ALIGNINGBALL, STEM & SEATS
ANTI-STATIC DEVICE
ANTI-BLOWOUT STEM
SELF-RELIEVING SEAT RINGS
ZERO EMISSIONVALVES
DOUBLE BLOCK & BLEED
SOFT/METALSEATING
Product Range Design Features
THE ART OF MAKING VALVES THE ART OF MAKING VALVES
