UWE signage design guidelines

39
UWE signage design guidelines Version 1.0 September 2017 CONTENTS

Transcript of UWE signage design guidelines

Page 1: UWE signage design guidelines

BACK | HOME | FORWARD 1

UWE signage design guidelines

Version 1.0

September 2017 CONTENTS

Page 2: UWE signage design guidelines

BACK | HOME | FORWARD 2

Contents Introduction 3

Basic elements 4UWE Logo 5

Colour 6

Typeface 7

Pictograms 8

Campus map 9

Sign reference protocol 10

Materials and finishes 11

External signage 12Overview 13-14

Primary entrance signs (Type 1) 15

Direction signs (Type 2) 16-18

Fingerpost signs (Type 3) 19

Map signs (Type 4) 20

Building signs (Type 5) 21-22

Car park and info signs (Type 6) 23

Internal signage 24Overview 25-26

Sign construction principle 27

Block identification signs (Type 1) 28

Destination signs (Type 2) 29

Direction signs (Type 3) 30

Map signs (Type 4) 31

Directory signs (Type 5) 32

Toilet/lift/shower signs (Type 6) 33

Room information signs (Type 7) 34

Gallery 35External signs 36

Internal signs 37-38

Contact and resources 39

Page 3: UWE signage design guidelines

BACK | HOME | FORWARD 3

Introduction In the Spring of 2016 a new brand was created and implemented for The Univervisity of the West of England (UWE).

With the emergence of the new UWE brand, there was a need and opportunity to unify and clarify an integrated signage system that incorporates and is inline with the new brand ethos.

The following pages give an overview for the design and specification of the new UWE signage scheme.

This document gives details for interior and exterior signage in their respective sections, with a gallery of already produced signage examples at the back of this guideline.

When creating new signage, always check (see contact reference page) to see if there is an existing template available. This will help to achieve consistency of delivery across all of our signage.

New signage (interior or exterior) should not be commissioned without the approval from the UWE facilities department (see contact page for details).

Page 4: UWE signage design guidelines

BACK | HOME | FORWARD 4

UWE Logo 5

Colour 6

Typeface 7

Pictograms 8

Campus map 9

Sign reference protocol 10

Materials and finishes 11

Basic elements

Page 5: UWE signage design guidelines

BACK | HOME | FORWARD 5

Basic elements

UWE LogoIn almost all instances of signage (external and internal) the UWE logo appears at the top, either centred or ranged right and set onto a grey background.

To ensure that you use the correct version of the UWE logo, refer to the UWE brand guidelines.

For specific sizes and placement, please see the relevant pages that follow for further information. Frenchay

Campus

North Entrance

All visitors must report to reception

Car parks 1-11 P

Glenside Campus

Page 6: UWE signage design guidelines

BACK | HOME | FORWARD 6

Basic elements

ColourThe 2 key colours for all UWE signage is Grey and White. This has been implemented to help avoid a confusion of colour, improve legibility and imply a sense of consistency across all signage.

Colour finishes

Statutory palette

Material finish

UWE Red (satin)

to match PMS 185c

C:0 M:100 Y:100 K:0

Parking Blue (satin)

to match PMS 185c

C:100 M:20 Y:100 K:0

Metallic silver (satin)

Stainless Steel / aluminium

Metallic silver (satin)

Powder coating or spray finish

Signage Grey (satin)

to match PMS 431c

C:10 M:0 Y:0 K:65 or

RAL 7005

Traffic White (satin)

RAL 9016

Display panel colour

CautionPMS Process Yellow

PMS Process Black

FirePMS 340 Green

High white

ProhibitionPMS 485

High white

InformationPMS Process Blue

High white

Signage panel construction finish (excluding display panel faces)

UWE brand mark when used on signage panels

Parking symbol and blue elements on car park signs

Lettering, arrows, pictograms and graphic information. Also background colour for destination panels

Page 7: UWE signage design guidelines

BACK | HOME | FORWARD 7

Basic elements

TypefaceSignage at UWE is to be set exclusively in Parisine Pro (Regular/Bold)

As a general rule, information/direction text should be set in Parisine Pro Regular and Building names/titles/headings etc ... in Parisine Pro Bold.

Parisine Pro Bold

ABCDEFGHijkLmnoPqRstuVwxyzabcdefghijklmnopqrstuvwxyz1234567890

Parisine Pro Regular

ABCDEFGHIjKLMNOPqRSTUvWxYzabcdefghijklmnopqrstuvwxyz1234567890

Page 8: UWE signage design guidelines

BACK | HOME | FORWARD 8

Cashpoint Wifi

Basic elements

PictogramsHere is a selection of pictograms that are appropriate for use on UWE signage. As further pictograms are required, always consult with the originators of the pictogram family (see contact page for details).

Male toilet Baby feeding facilities

First aid

Bus Motorcycles

Female toilet Accessible toiletGender neutral toilet

Shop

Showers

Parking

Cloakroom

Information

No vaping/smoking

Café

Cycle rack

Stairs

Braille

No photography

Car

Lift

No eating/drinking

Cycles

Accessible liftMulti Faith room

No mobile phones

Baby change

Pedestrians

Data points

Page 9: UWE signage design guidelines

BACK | HOME | FORWARD 9

Basic elements

Campus mapSubheading textBody text

Campus map project to be agreed / advised by UWE team

Page 10: UWE signage design guidelines

BACK | HOME | FORWARD 10

Basic elements

Sign reference protocol and id stickers (asset tags)Every sign throughout each campus will have it’s own unique reference and asset tag.Shown here is the protocol that was used for generating signage references.

This should also be used when adding new signage for any part of a campus.

Asset tags are self adhesive stickers 50mm x 20mm and applied to a discreet edge or reverse of sign, whichever is more appropriate.

Asset tags will enable easy cross referencing when any changes/amends are required.

Layout details

1 Parisine Regular 25pt. Centred

Example sign referencesUWE Campuses:

Frenchay (including Bristol Business Park)

Glenside

Internal signs

External signs

UWE City Campuses:

Arnolfini

Bower Ashton

Spike Island

Watershed

UWE Floor levels:

*1 – Lower Ground Floor

2 – Ground Floor

3 – First Floor

4 – Second Floor

5 – Third Floor

6 – Fourth Floor

7 – Fifth Floor

* Buildings without a Lower Ground Floor will start at 1 – Ground Floor

Campus reference (this instance refers to ‘Frenchay’)

Floor reference (this instance refers to Floor 2)

Sign number (an allowance of up to 999 signs per floor)

Building reference (this instance refers to building ‘N’)

FN2 001

Campus reference (this instance refers to ‘Glenside’)

This refers to ‘External’)

Sign number (an allowance of up to 999 signs)

GE- 001FN2001

1

50mm

20mm

Page 11: UWE signage design guidelines

BACK | HOME | FORWARD 11

Basic elements

Materials and finishesShown here are a selection of typical materials and finishes that have already been adopted for new UWE signage.See ‘Gallery’ section for more examples of new signage.

Resin display panels Perspex/acrylic panels with white opaque backing

Aluminium for large graphic and information display panels

Stainless steel/aluminium for sign background panels

Detail of toilet sign edgeToilet signs with chamfered edge

Stainless steel floor numbers applied to walls

White acrylic floor number signs Brushed stainless steel posts

Page 12: UWE signage design guidelines

BACK | HOME | FORWARD 12

External signageOverview 13-14

Primary entrance signs (Type 1) 15

Direction signs (Type 2) 16-18

Fingerpost signs (Type 3) 19

Map signs (Type 4) 20

Building signs (Type 5) 21-22

Car park and info signs (Type 6) 23

Page 13: UWE signage design guidelines

= 100 mm square

BACK | HOME | FORWARD 13

Glenside Campus

Main reception

Library

Student Union

Blackberry Centre

The Riverside Unit

Medical Records

Education Centre

A B

D E

All visitors must report to reception

Car parks 1-11 P

Glenside Campus

Cycle path

Pedestrians

Information point

Car Parks 1–3P

P

P q

A-n

Centre for Performing Arts

Mallard House

visitor Car Park 19 iFrenchay Campus

North Entrance

Type 1Primary entrance signs

Type 2Direction signs

Type 3Fingerpost signs

External signage

Overview 1 of 2This page shows a general layout and size proportions for the following sign types:

Type 1 Primary entrance signs

Type 2 Direction signs

Type 3 Fingerpost signs

Type 4-6 signs (see next page)

See relevant sign pages for details of each sign type.

Page 14: UWE signage design guidelines

Building signs (occupancy)

Type 4Campus map signs

Type 5Building signs (letter identification)

Type 6Car park and information signs

BACK | HOME | FORWARD 14

Private land

uwE Bristol sande volupta tiasin et aut es eaquatem. Ris dusam in

Restricted Access (Parking charges apply)See notes in car park for detail. vehicles parked entirely at owners risk

For authorised users only

ACar Park

uwE Bristol sande volupta tiasin et aut es eaquatem. Ris dusam in

3

k

A B C D E F G H i j k

Glenside CampusMap

KeyAccum volorerovid

Ugat venet parum

ventiae nient

Ut occuptur

quo eos comnis

Archict

Accum volorerovid

Ugat venet parum

ventiae nient

Ut occuptur

quo eos comnis

Archictv

Accum volorerovid

Ugat venet parum

ventiae nient

Ut occuptur

quo eos comnis

you are here

Occupation information

Occupation information

Occupation information

Occupation information

Occupation information

Frenchay Campus D

Title of this Building

Glenside Campus

Catherine Hawkins Building

Glenside Campus k

Glenside Library

External signage

Overview 2 of 2This page shows a general layout and size proportions for:

Type 4 Campus map signs

Type 5 Building (identification and occupancy) signs

Type 6 Car park and information signs

See relevant sign pages for details of each sign type.

= 100 mm square

Page 15: UWE signage design guidelines

= 100 mm square

BACK | HOME | FORWARD 15

External signage

Primary entrance signs (Type 1)

Materials and features• Monolithfreestandingconstruction

• Internalilluminationoption

• Powdercoatedorsprayedsatinsilveraluminium side returns/border

• Acyclic,white/greyfrontfacepanels

• Steel,boxconstructionplinthsetintoconcrete foundation

• 50mmcornerradius

Layout details

1 Centred 750mm wide UWE logo

2 Parisine Bold 600/720pt. 200mm left margin

3 Parisine Regular 450pt. 200mm left margin

Frenchay Campus

North Entrance

Type 1aFull height version

Side profile

Type 1bLow level version

1

1

2

2

3

3 North Entrance

Frenchay Campus

Edge detail

Signage Grey (satin)

RAL 7005

Signage Grey (satin)

RAL 7005

UWE Red (satin) to match

Pms 185c

White acrylic panel

Metallic silver (satin)

sprayed or powdercoat

Metallic silver (satin)

sprayed or powdercoat

Page 16: UWE signage design guidelines

= 100 mm square BACK | HOME | FORWARD 16

External signage

Large direction signs (Type 2a)

Materials and features• 2000mmwide,aluminiumdisplaypanels

• 90mm,satinstainlesssteelposts

• UWEbrandingongreysurface

• Wayfindinginformationonwhitesurface

• Upper/lowercornersonpanelsareradiused(interior corners of slats are square)

• Multipleslat,singlepanelanddual panel options

• Thisversionshows9slats200mmhighandset 30mm apart

• 50mmcornerradius(whereapplicable)

Layout details

1 500mm wide UWE logo set 210mm from right edge

2 Parisine Bold 450/550pt. 110mm left margin

3 Parisine Regular 450/550pt. 110mm left margin

4 160mm high arrow set 110mm from right edge

5 130mm high arrow set 110mm from left/right edge

6 100mm ‘block’ letters set 350mm from left edge and spaced 20mm apart

7 Parisine Regular 240pt. 350mm left margin

Bower Ashton Campus

Department of Creative Industries

Main Entrance

Glenside Campus

Main reception

Library

Student Union

Blackberry Centre

The Riverside Unit

Medical Records

Education Centre

A B C

D GE HF j k

Multiple slat version (1200 x 2750 approx)

Single panel example (1200 x 2000)

1

2

5

6

7

3 4

5

Signage Grey (satin)

RAL 7005

UWE Red (satin) to match

Pms 185c

Traffic White (satin)

RAL 9016

Metallic silver (satin)

stainless steel

200mm slats set 30mm apart

Panel fixing detail

Lower panel/post detail

Post cap fixing detail

Signage Grey (satin)

RAL 7005

Page 17: UWE signage design guidelines

= 100 mm square

BACK | HOME | FORWARD 17

External signage

Medium direction signs (Type 2b)

Materials and features• 1200mmwidedisplaypanels

• Satinstainlesssteel90mmposts

• UWEbrandingongreysurface

• Wayfindinginformationonwhitesurface

• Upper/lowercornersonpanelsareradiused(interior corners of slats are square)

• Multipleslat,singlepanelanddual panel options

• 35mmcornerradiustopanels

Layout details

1 320mm wide UWE logo set 100mm from right edge

2 Parisine Bold 300/360pt. 100mm left margin

3 80mm symbol set 100mm from left edge

4 Parisine Regular 200pt. 100mm left margin

5 65mm high arrow set 100mm from right edge

6 Parisine Regular 300/380pt. 100mm left margin

7 100mm high arrow set 100mm from left edge

Glenside Campus

Museum

All visitors must report to reception

Car Park 6 Cycle Park

Retail Deliveries

Car Parks 16, 17

Loading Bayn

UWE Exhibition and Conference Centre

Campus destination example (1200 x 1000)

Direction only example (1200 x 800)

Single message example (1200 x 700)

4 7

2 53

6

1

Signage Grey (satin)

RAL 7005

Signage Grey (satin)

RAL 7005

UWE Red (satin) to match

Pms 185c

Traffic White (satin)

RAL 9016

Metallic silver (satin)

stainless steel

Panel fixing detailPost cap fixing detail

Lower panel/post detail

Page 18: UWE signage design guidelines

= 100 mm square

BACK | HOME | FORWARD 18

External signage

Small direction signs (Type 2c)

Materials and features• 1000mmwidedisplaypanels

• Satinstainlesssteel75mmposts

• UWEwelcomemessageongreysurface

• Wayfindinginformationonwhitesurface

• Upper/lowercornersonpanelsareradiused(interior corners of slats are square)

• Multipleslat,singlepanelanddual panel options

• Individualslatsare185mmhighandset 20mm apart)

• 25mmcornerradius(whereapplicable)

Layout details

1 Parisine Bold 200pt. 60mm left margin

2 60mm symbol set 60mm from left edge

3 65mm high arrow set 60mm from right edge

4 Parisine Regular 300/380pt. 100mm left margin

5 100mm wide (as shown) arrow set 60mm from right edge

6 Parisine Regular 200pt. 60mm left margin

GlensideTRADERSdeliveries

welcome to uwE Bristol

4 slat example (1000 x 800)

3 slat example (1000 x 600)

Single panel example (1000 x 600)

Single slat example (1000 x 185)

Double slat example (1000 x 380)

1 2 3 4 5 6

Car Parks 16, 17

n

Car Parks 16, 17

Car Parks 16, 17

Retail DeliveriesReception

Loading bay

Cycle path

Cycle path

Pedestrians

Signage Grey (satin)

RAL 7005

Signage Grey (satin)

RAL 7005

Traffic White (satin)

RAL 9016

Metallic silver (satin)

stainless steel

Panel fixing detailPost cap fixing detail

Lower panel/post detail

Lower panel/post detail

Page 19: UWE signage design guidelines

= 100 mm square= 100 mm square

BACK | HOME | FORWARD 19

External signage

Fingerpost signs (Type 3)

Materials and features• Satinstainlesssteel90mmposts

• Wayfindinginformationonwhite acrylic slats (800mm x 90mm)

• Upper/lowercornersonslatsareradiused(interior corners are square)

• Slatsarealignedverticallywithhiddenlocating pins

• Maximum6slatsperelevation.Ifmorearerequired, group information on 1 slat to save space

• 25mmcornerradius(whereapplicable)

Layout details

1 Parisine Regular 120pt. Ranged left 40mm left edge. 1 character space away from symbol (where applicable)

2 53mm symbol. 40mm left/right margin. Multiples set 10mm apart.

3 Parisine Regular 120pt. Ranged right 40mm from right edge. 1 character space away from symbol (where applicable)

Information point

Car Parks 1–3P

P

P q

A-n

Centre for Performing Arts

Mallard House

visitor Car Park 19 i

Centre for Performing Arts

visitor Car Park 19

Car Parks 1–3P

P

1

Information point

P q

A-n

i

3 2

2

Signage Grey (satin)

RAL 7005

White acrylic panel

Metallic silver (satin)

stainless steel

Slat profile detail

Page 20: UWE signage design guidelines

= 100 mm square

BACK | HOME | FORWARD 20

External signage

Map signs (Type 4)

Materials and features• Monolithfreestandingconstruction

(Type 4a)

• Powdercoatedorsprayedsatinsilversidereturns/border

• UWEbrandingongreysurface

• Wayfindinginformationonwhitesurface

• Mappaneltoberemovableforupdates

• 50mmcornerradius

Layout details

1 260mm wide UWE logo set 90mm from right edge

2 Parisine Bold/Regular 170/200pt. 90mm left margin

3 Map design TBC

4 Key layout/design TBC

A B C D E F G H i j k

KeyAccum volorerovid

Ugat venet parum

ventiae nient

Ut occuptur

quo eos comnis

Archict

Accum volorerovid

Ugat venet parum

ventiae nient

Ut occuptur

quo eos comnis

Archictv

Accum volorerovid

Ugat venet parum

ventiae nient

Ut occuptur

quo eos comnis

you are here

you are here

A B C D E F G H i j k

KeyAccum volorerovid

Ugat venet parum

ventiae nient

Ut occuptur

quo eos comnis

Archict

Accum volorerovid

Ugat venet parum

ventiae nient

Ut occuptur

quo eos comnis

Archictv

Accum volorerovid

Ugat venet parum

ventiae nient

Ut occuptur

quo eos comnis

you are here

Type 4aMonolith version

Type 4bWall mounted version

Glenside CampusMap

Glenside CampusMap

1

2

3

4

Edge detail

Signage Grey (satin)

RAL 7005

Signage Grey (satin)

RAL 7005

UWE Red (satin) to match

Pms 185c

White acrylic panel

Metallic silver (satin)

sprayed or powdercoat

Page 21: UWE signage design guidelines

= 100 mm square

BACK | HOME | FORWARD 21

External signage

Building occupancy signs (Type 5a/b/c)Materials and features• Powdercoatedorsprayedsatinsilverside

returns/border

• UWEGreytitlepanels

• Whiteacrylicinformationpanels

• Letteringexternalgradevinyl

• Occupancyinformationonwhitesurface

• Wallorpostmounted

• 35mmcornerradiustopanels

Layout details

1 140mm wide UWE logo set 50mm from right edge

2 Parisine Bold 250/280pt. 50mm left margin

3 Parisine Regular 75pt. 50mm left margin

4 Parisine Regular 100/120pt. 50mm left margin

5 1.5mm grey separator line. 50mm left margin

6 Parisine Bold 150/180pt. 50mm left margin

7 315mm wide UWE logo set 80mm from right edge

8 Parisine Regular 180pt. 60mm left margin

9 Parisine Bold 380/450pt. 60mm left margin

1 7

Type 5aSmall/medium version (building name only)

600/900mm x 400mm

Type 5aSmall version (building name and single occupation information)

600mm x 400mm

Type 5bSmall version (building name and multiple occupation information)

600mm x 900mm

Type 5cLarge version (building name and multiple or single occupation information)

900mm x 600/1200mm

Glenside Campus k

Glenside Library

Frenchay Campus

Occupation information

D

title of this Building

Occupation information

Occupation information

Occupation information

Occupation information

Occupation information

Frenchay Campus D

title of this Building

Occupation information

Occupation information

Occupation information

Occupation information

Occupation information

Frenchay Campus D

title of this Building

Pervasive Media Studio

Cultural Studio

Café and Bar

Conference Centre

uwE Bristol

Frenchay Campus D

Frenchay Campus A

Coursework Hub

Glenside Campus

Catherine Hawkins Building

Glenside Campus

Catherine Hawkins Building 2

3

4

58

9

6Edge detail

Signage Grey (satin)

RAL 7005

Signage Grey (satin)

RAL 7005

UWE Red (satin) to match

Pms 185c

White acrylic panel

Metallic silver (satin)

sprayed or powdercoat

Page 22: UWE signage design guidelines

= 100 mm square

BACK | HOME | FORWARD 22

External signage

Building letter identity signs (Type 5d/e)Materials and features• Highvisibilitybuildinglettersigns

• Mountedatprominentlocationsonbuilding exteriors for clear orientation

• TrafficWhite(RAL9016)letteronUWEgrey aluminium, box constructed panels

Layout details

1 600mm high Parisine Bold letterform. Centred

2 50mm corner radius

3 370mm high Parisine Bold letterform. Centred

4 35mm corner radius

Type 5dLarge version (for identifying buildings at a further distance)

1000mm x 1000mm x100mm

Type 5eSmall version (for closer distance identification)

600mm x 600mm x 70mm

kA1 2 43

Signage Grey (satin)

RAL 7005

Traffic White (satin)

RAL 9016

Page 23: UWE signage design guidelines

= 100 mm square

BACK | HOME | FORWARD 23

External signage

Car park and info signs (Type 6a/b/c)Materials and features• Satinstainlesssteel90/75mmposts

• 3-sidedoptionforType5asigns

• Aluminium(dibond)displaypanels

• Panelstohaveradiusedcorners

Panel sizes

1 Medium information, orientation signs 600mm x 900mm (90mm posts) 35mm radius corners

2 Dual message symbol signs 300mm x 600mm (75mm posts) 25mm radius corners

3 Single message symbol signs 300mm x 300mm (75mm posts) 25mm corners

Pay here

uwE Bristol sande volupta tiasin et aut es eaquatem. Ris dusam in

Car Park

uwE Bristol sande volupta tiasin et aut es eaquatem. Ris dusam in

3Private land

uwE Bristol sande volupta tiasin et aut es eaquatem. Ris dusam in

Restricted Access (Parking charges apply)See notes in car park for detail. vehicles parked entirely at owners risk

For authorised users only

Sid

e p

rofi

le

Type 6a

3-sided high-level orientation signs

Type 6b

Dual message low-level sign

Type 6b

Single message low-level sign (variable height)

Type 6c

Medium size car park information panel sign

1

3

3

12

Signage Grey (satin)

RAL 7005

Parking Blue (satin)

c100 m20 y0 k0

Parking Blue (satin)

c100 m20 y0 k0

Parking Blue (satin)

c100 m20 y0 k0

Traffic White (satin)

RAL 9016

Metallic silver (satin)

stainless steel

Signage Grey (satin)

RAL 7005

Page 24: UWE signage design guidelines

BACK | HOME | FORWARD 24

Internal signageOverview 25-26

Sign construction principle 27

Block identification signs (Type 1) 28

Destination signs (Type 2) 29

Direction signs (Type 3) 30

Map signs (Type 4) 31

Directory signs (Type 5) 32

Toilet/lift/shower signs (Type 6) 33

Room information signs (Type 7) 34

Page 25: UWE signage design guidelines

= 100 mm square

BACK | HOME | FORWARD 25

F L2

G H k jE m

1N1-31

1N41-95

Toilets

Lift

n 1L2

information

Coursework HubE

n

Information Point

Students’ Union

Library

Octagon

E L2 The Hub

Student village

Centre for Sport

Exhibition & Conference centre

P q R

Type 2 Destination signs (suspended, wall mounted and vinyl)

Type 3 Direction signs

Student Services

Waiting Area

Type 1 Block ID signs

F

school of Life sciencesDepartment of Applied SciencesDepartment of Psychology

Internal signage

Overview 1 of 2This page shows a general layout and size proportions for:

Type 1 Block ID signs

Type 2 Destination signs

Type 3 Direction signs

(see next page for Type 4-6 signs)

Page 26: UWE signage design guidelines

= 100 mm square

BACK | HOME | FORWARD 26

Internal signage

Overview 2 of 2This page shows a general layout and size proportions for:

Type 4 Campus map signs

Type 5 Directory / floor plan signs

Type 6 Toilet/lift/shower signs

Type 7 Room information signs

Note: all signs shown are for example only and not actual signs

you are here

A B C D E F G H i j k

Glenside CampusMap

KeyAccum volorerovid

Ugat venet parum

ventiae nient

Ut occuptur

quo eos comnis

Archict

Accum volorerovid

Ugat venet parum

ventiae nient

Ut occuptur

quo eos comnis

Archictv

Accum volorerovid

Ugat venet parum

ventiae nient

Ut occuptur

quo eos comnis

you are here

n 62

Not every disability is visible

name of staff member Position held

1k4 Room Title

name of staff member Position held

name of staff member Position held

name of staff member Position held

1A07 Room Title

Type 4 Campus map signs

Type 5 Directory / floor plan signs

Type 6 Toilet/lift/shower signs

Type 7 Room information signs

Future Students

Strategic Communications and Engagement

Toilets

2

-1

Human Resources

Commercial Services

Research, Business and Innovation

Toilets

Showers

0

Estates and Facilities

Finance

Toilets

1

n 62

A B C D E F G H i j k

KeyAccum volorerovid

Ugat venet parum

ventiae nient

Ut occuptur

quo eos comnis

Archict

Accum volorerovid

Ugat venet parum

ventiae nient

Ut occuptur

quo eos comnis

Archictv

Accum volorerovid

Ugat venet parum

ventiae nient

Ut occuptur

quo eos comnis

you are here

Glenside CampusMap

Page 27: UWE signage design guidelines

BACK | HOME | FORWARD 27

Sign construction principleShown opposite is a suggested principle of construction that minimises use of materials, keeping weight of signs to a minimum. Details of fixing/bonding etc ... to be specified by manufacturer.

Graphic information is applied as a single vinyl element and can be removed/updated as required.

All signs to have an identification number (sign reference) sticker applied to the top or bottom edge, depending on the hanging height of sign and applied to the most discreet edge.

This method of construction would apply to the following types of sign:

• Type 2 Destination signs

• Type 3 Direction signs

• Type 4 Campus map signs

• Type 5 Directory / floor plan signs

Frame material

Machined and finished, aluminium or sprayed silver resin frame sections.

35mm radiused upper and lower corners.

Butted construction as advised by manufacturer.

Addition of brace/support bar to support display panels on larger signs

Display panel

White opalescent acrylic panel (material to be confirmed) with opaque white backing and vinyl sign graphics affixed to front face.

Option for making display panel removable/replaceable with clip fixing to rear of panel.

vinyl graphic

Single sheet vinyl graphic applied over display panel. Can be removed/updated when required.

Display method

Signs to be fixed to walls/doors/glazing (where appropriate). Also option of suspending double/single sided versions from ceiling.

Constructed sign

20mm frame sections

6mm frame edge to front elevation

Frame dimensions

Standard width of frame is 600mm. This can vary dependant on sign requirements

Height of frame dependant on sign requirements

50mm

3mm display panels

50mm

Edge detail Sign id sticker

Metallic silver (satin)

sprayed or powdercoat

Page 28: UWE signage design guidelines

= 100 mm square

BACK | HOME | FORWARD 28

Internal signage

Block identification signs (Type 1)

Materials and features• Clearandconsistentblockwayfinding

• 35mmradiusedcorners

• 400mmx400mmx60mm

• Optionsforsuspending,wallmounting and projecting signs

• 20mmdeep,silver/aluminiummounting block for projecting version

Layout details

1 215mm high Parisine Bold letterform. Centred

2 35mm corner radius

Suspended version

Wall mounted version

Side profile

Side profile

Projecting version

nn

1 2

Signage Grey (satin)

RAL 7005

n

Page 29: UWE signage design guidelines

= 100 mm square

BACK | HOME | FORWARD 29

Internal signage

Destination signs (Type 2a/b/c)

Materials and features• Suspended(type2a)orwallmounted(type2b)

• Powdercoatedorsprayedsatinsilversidereturns/border

• Currentlocation/destinationinformationongrey surface

• Forspecificationandfinishsee‘signconstruction principle’ page

• 35mmcornerradiustosigns

Layout details

1 Parisine Regular 400pt. Centred vertically and horizontally

2 Parisine Bold 270pt. Heading centred, margin dependant on message

3 Parisine Regular 170/230pt. Ranged left with heading, margin dependant on message

4 Parisine Regular 300pt. Centred vertically and horizontally

5 110mm symbol

6 Size of message dependant on space available

Note: all signs shown are for example only and not actual signs

Coursework Hub

information

Type 2a (1.6m)

Large suspended version

(1600mm x 400mm)

Type 2a (1.2m)

Large suspended version

(1200mm x 400mm)

Type 2b

Smaller, suspended or wall mounted version

(1000mm x 300mm)

Type 2 c (vinyl)

vinyl decal versions for glazed and facia areas. White lettering applied to tinted background for enhanced legibility. Can also have solid grey background on unglazed areas where appropriate.

Edge detail

school of Life sciencesDepartment of Applied SciencesDepartment of Psychology

1

5

2

3

4

6

Signage Grey (satin)

RAL 7005

Metallic silver (satin)

sprayed or powdercoat

Page 30: UWE signage design guidelines

= 100 mm square= 100 mm square

BACK | HOME | FORWARD 30

Internal signage

Direction signs (Type 3)

Materials and features• Suspended(type3a)orwallmounted(type3b)

• Powdercoatedorsprayedsatinsilversidereturns/border

• Currentlocation/destinationinformationongrey surface

• Wayfindinginformationonwhitesurface

• Forspecificationandfinishsee‘signconstruction principle’ page

• 35mmcornerradiustosigns

Layout details

1 70mm ‘box’ graphic, Parisine Bold 170pt characters. 50mm from left edge and spaced 30mm apart

2 45mm ‘box’ graphic, Parisine Bold 110pt characters. 50mm from left edge and spaced 30mm apart

3 Parisine Regular 90/105pt. 50mm left margin

4 1.5mm grey separator line. 50mm left margin

5 30mm high arrow set 50mm from right edge

Note: all signs shown are for example only and not actual signs

Current block location

Current floor level

Current stairwell (if applicable)

Wayfinding information (on white area)

Chamfered or radiused edges to display panel

F G

1N1-31

1N41-95

L 15F 2

G H k jE m

1N1-31

1N41-95

Toilets

Lift

n 12

j H

G m

G H j k

Room 1k4

Rooms 1k5-11

Way out

Toilets

k 1

Information Point

Students’ Union

Library

Octagon

E 2 The Hub

Student village

Centre for Sport

Exhibition & Conference centre

P q R

Type 3a

Large double aspect, suspended version. variable height options to suit requirements

Type 3b

Medium and small signs. variable height options to suit requirements. Wall mounted or suspended as required.

F G

1N1-31

1N41-95

L 15

Edge detail

1

2 3 54

Signage Grey (satin)

RAL 7005

Signage Grey (satin)

RAL 7005

Metallic silver (satin)

sprayed or powdercoat

Page 31: UWE signage design guidelines

= 100 mm square

BACK | HOME | FORWARD 31

Internal signage

Map signs (Type 4)

Materials and features• Monolithfreestandingconstruction

(Type 4a)

• Powdercoatedorsprayedsatinsilversidereturns/border

• UWEbrandingongreysurface

• Wayfindinginformationonwhitesurface

• Mappaneltoberemovableforupdates

• 50mmcornerradiustosigns

Layout details

1 260mm wide UWE logo set 90mm from right edge

2 Parisine Bold/Regular 170/200pt. 90mm left margin

3 Map design TBC

4 Key layout/design TBC

Note: all signs shown are for example only and not actual signs A B C D E F G H i j k

KeyAccum volorerovid

Ugat venet parum

ventiae nient

Ut occuptur

quo eos comnis

Archict

Accum volorerovid

Ugat venet parum

ventiae nient

Ut occuptur

quo eos comnis

Archictv

Accum volorerovid

Ugat venet parum

ventiae nient

Ut occuptur

quo eos comnis

you are here

you are here

A B C D E F G H i j k

KeyAccum volorerovid

Ugat venet parum

ventiae nient

Ut occuptur

quo eos comnis

Archict

Accum volorerovid

Ugat venet parum

ventiae nient

Ut occuptur

quo eos comnis

Archictv

Accum volorerovid

Ugat venet parum

ventiae nient

Ut occuptur

quo eos comnis

you are here

Type 4aMonolith version

Type 4bWall mounted version

Glenside CampusMap

Glenside CampusMap

1

2

3

4

Edge detail

Signage Grey (satin)

RAL 7005

UWE Red (satin) to match

Pms 185c

Metallic silver (satin)

stainless steel

Page 32: UWE signage design guidelines

= 100 mm square= 100 mm square

BACK | HOME | FORWARD 32

Internal signage

Directory signs (Type 5)

Materials and features For specification and finish see ‘sign construction principle’ page

• 35mmcornerradiustosigns

• Wallmountedwithconcealedfixings

• Currentfloorlevelhighlightedingrey

• 35mmcornerradiustosigns

Layout details

1 70mm ‘box’ graphic, Parisine Bold 170pt characters. 50mm from left edge and spaced 30mm apart

2 Parisine Regular 140pt. 50mm left margin

3 30mm high toilet symbols (male/female). Set 2 character spaces from text

4 Parisine Regular 90/105pt with 12mm paragraph spacing. 120mm left margin

5 1.5mm grey separator line. 50mm left margin

6 Floor plan illustrations to be created as required and in the set style already in place.

Note: all signs shown are for example only and not actual signs

Current block location

Current floor level

Current stairwell (if applicable)

Chamfered or radiused edges to display panel

Future Students

Strategic Communications and Engagement

Toilets

2

1

n 62

Human Resources

Commercial Services

n 62

Future Students

Strategic Communications and Engagement

Toilets

2

-1

Human Resources

Commercial Services

Research, Business and Innovation

Toilets

Showers

0

Estates and Facilities

Finance

Toilets

1

n 62

Wall mounted directory and floor plan signs. Consistent in size and positioned at key stairwell/entrance areas.

Detail of floor plan example (not an actual sign)

1

2 3 4 5

Estates and Facilities

Finance

Toilets

0 Signage Grey (satin)

RAL 7005

Signage Grey (satin)

RAL 7005

Metallic silver (satin)

sprayed or powdercoat

6

6

Page 33: UWE signage design guidelines

= 100 mm square= 100 mm square

BACK | HOME | FORWARD 33

Internal signage

Toilet/lift/shower signs (Type 6a/b)

Materials and features• Type6a–projectingsigns200mmhigh

• Type6b–door/wallmountedsigns150mmhigh

• Opalacrylicdisplaypanelswithopaquewhite backing and surface applied grey (PMS 431) vinyl graphics

• Projectingversionconstructedfromx2 5mm panels

• 60mmdeepx90mmwide/highmachined,aluminium mounting block for projecting signs

• Concealingfixingsforallsigns

• 25mmcornerradiustopanels

• ‘Lift’messagecanhavedesignatednumberif appropriate

Layout details

1 Symbols to be set centrally between outer edge and edge of mounting bracket

2 100mm symbol box centred between outer edge and edge of mounting bracket

3 Parisine Bold 80pt. Centred

4 110mm high symbol, centred on panel

Not every disability is visible

Lift

Side elevation

(x2 5mm panels)

Side elevation

(5mm panel)

Type 6a – Projecting signs250mm x 200mm for multi symbol signs

200mm x 200mm for single symbol signs

Type 6b – Door/wall signs

Not every disability is visible

Double-sided projecting version

Door mounted version

1 2 3

4

Signage Grey (satin)

RAL 7005

White acrylic panel

Metallic silver (satin)

stainless steel

Type 6a signs

Page 34: UWE signage design guidelines

= 100 mm square= 100 mm square

BACK | HOME | FORWARD 34

Internal signage

Room information signs (Type 7)

Materials and features• Papyrusoff-the-shelfdoorplatesystem

• Singleormulti-occupancyoptions

• Removableinformationpaperpanelfor easy updating.

• WordtemplatesareavailablefromUWEestates (see contact page) for generating new signs

• Signsshouldbescrewedtodoorwherepossible. For fully glazed doors, self adhesive system is available. Grey vinyl is applied to opposite side of glazing to obscure fixing tape on back of signs.

Layout details

1 Small room sign (297mm x 105mm). Use available word template for generating new signs (see contact page for UWE estates details)

2 Large room sign (297mm x 210mm). Use available word template for generating new signs (see contact page for UWE estates details)

3 UWE asset tag reference vinyl sticker for doors and reverse of signs (see page 10 for further detail on asset tags)

4 Parisine Regular 25pt. Centred

Type 7a Size 1

Single occupancy door sign

Signs to be aligned with top of glazed panel for consistency

unique door identification sticker (asset tag)

Type 7b Size 2

Multiple occupancy door sign (suggest x5 as the recommended maximum)

name of staff member Position held

1k4 Room Title

name of staff member Position held

name of staff member Position held

name of staff member Position held

1A07 Room Title

name of staff member Position held

1A07 Room Title

name of staff member Position held

1k4 Room Title

name of staff member Position held

name of staff member Position held

1

2

3FN2001

4

Page 35: UWE signage design guidelines

BACK | HOME | FORWARD 35

GalleryExternal signs 36

Internal signs 37

Page 36: UWE signage design guidelines

Type 2a – large direction sign

Type 2c – small direction sign

Type 3 – fingerpost sign

Type 2c – small direction sign

Architectural lettering

Facia sign

BACK | HOME | FORWARD 36

External signs

Page 37: UWE signage design guidelines

BACK | HOME | FORWARD 37

Internal signs

Type 5 – directory / floor plan signs

Type 6a – projecting lift sign

Type 4 – Campus map sign structure with directory content

Type 6a – projecting toilet sign

Type 3a – suspended direction signs

Door asset tag sticker

Page 38: UWE signage design guidelines

BACK | HOME | FORWARD 38

Internal signs

Type 7 – papyrus door sign (small)

Reception desk – illuminated sign

Type 7 – papyrus door sign (large) Large floor id number sign

Type 3a – suspended direction sign detail

Page 39: UWE signage design guidelines

BACK | HOME | FORWARD 39

UWE Facilities

Pete Sutherland

Head of Space Management and Design

T: 0117 32 86 284E: [email protected]

Signage design consultants

Howard Miles – Managing DirectorABG Design

T: 01872 248 355E: [email protected]

Contacts and resourcesFor advice on new signage or templates for papyrus door signs, please contact UWE facilities in the first instance.

Note for sign contractors:To be compliant with risk assesment protocol, prior agreement to be on any UWE campus site must be obtained from UWE facilities department before any work or audit is undertaken.