Uv repair patch_quick patch_en_
-
Upload
vip-christian-wild -
Category
Technology
-
view
15 -
download
2
Transcript of Uv repair patch_quick patch_en_
UV curing repair patch – GRP
Easy application – cut, peel and stick – finished
Extremely durable in aggressive environments
Flexible and waterproof
Weather- and UV resistent
Can be drilled, tapped, sanded and painted
Resistant against chemicals, solvents and oils
Resistant against corrosion & abrasion
Temperature resistant from -40°C to +200°C
No shrinkage or expansion during the application
Bonds to most surfaces, even w/o primer
Fast curing (5 minutes @ sunny environment)
Available Sizes
150x 75mm, 1,8mm tickness
150x 225mm, 1,8mm tickness
300x 225mm, 1,8mm tickness
UV Technology At a glance
Additionally to the Poly Solar
Patch in your chosen size you
will just need a pair of
scissors or a suitable knife.
UV Technology Application
Use the scissors to cut open
the protection foil around the
PolySolar Patch Remove the backing foil on
the sticky side prior to
application onto your repair
area.
UV Technology Application
Clean surface area eliminate
free of grease and loose
particles. No Primer needed
to prepare for bonding.
Cut the PolySolar Patch to
the desired size with scissors
or knife and prepare for fixing
onto repair area. PolySolar
Patch on sticky side bonds
perfectly to most materials.
UV Technology Application
Start wrapping around burst
or leaking pipe or onto repair
area.
Wrap completely around pipe
to stop the leak, and leave to
cure in the direct sunlight for
at least 20-30 minutes. App.
60 mins. Cure time w/o UV
light exposure.
Handy UV light available as
well.
UV Technology Application