1

E-HOUSE (SWITCHBOARD- AND CONTROL ROOM)

Halvorsen E-House’s can be designed for permanent or

temporary installation.

Benefits:

Flexible internal layouts to suit your requirements

Extremely compact design

Good service access

Lifting approval according to DNV 2.7.1, DNV

2.7-3 or NORSOK R-002

ISO corners and forklift pockets

Approved for EX Zone 1, 2 and safe area

Surface treatment Norsok M501 System 1

Noise and Fire isolation

Over pressured

High quality personal door(s) and escape hatch

High quality fixtures and interior design.

Tie-in compartment for rig interface and cables

Power supply 230, 400-440-480-660-690VAC

50/60Hz

Fire & Gas detection system with signals to CCREmergency Power Distribution modul

(42ft) for Permanent installation, Zone 1

II2G

2

Power Distribution Module (e-house)

Halvorsen E-House’s can be designed for permanent or

temporary installation.

Benefits:

Flexible internal layouts to suit your requirements

Extremely compact design

Good service access

Lifting approval according to DNV 2.7.1, DNV

2.7-3 or NORSOK R-002

ISO corners and forklift pockets

Approved for EX Zone 1, 2 and safe area

Surface treatment Norsok M501 System 1

Noise and Fire isolation

Over pressured

High quality personal door(s) and escape hatch

High quality fixtures and interior design.

Tie-in compartment for rig interface and cables

Power supply 230, 400-440-480-660-690VAC

50/60Hz

Fire & Gas detection system with signals to CCRPower Distribution modul

(55ft) for drilling plant, Zone 2

II3G

3

OFFICE/ LABORATORY

Halvorsen office’s can be designed for permanent or

temporary installation.

Benefits:

Flexible internal layouts to suit your requirements

Extremely compact design

Good service access

Lifting approval according to DNV 2.7.1, DNV

2.7-3 or NORSOK R-002

ISO corners and forklift pockets

Approved for EX Zone 1, 2 and safe area

Surface treatment Norsok M501 System 1

Noise and Fire isolation

Over pressured

High quality personal door(s) and escape hatch

High quality fixtures and interior design.

Tie-in compartment for rig interface and cables

Power supply 230, 400-440-480-660-690VAC

50/60Hz

Fire & Gas detection system with signals to CCR

Control and store module (15ft)

II2G

4

WORKSHOP

Halvorsen container’s can be designed for permanent or

temporary installation.

Benefits:

Flexible internal layouts to suit your requirements

Extremely compact design

Good service access

Lifting approval according to DNV 2.7.1, DNV

2.7-3 or NORSOK R-002

ISO corners and forklift pockets

Approved for EX Zone 1, 2 and safe area

Surface treatment Norsok M501 System 1

Noise and Fire isolation

Over pressured

High quality personal door(s) and escape hatch

High quality fixtures and interior design.

Tie-in compartment for rig interface and cables

Control/Distribution board

Air conditioner

Power supply 230, 400-440-480-660-690VAC

50/60Hz

Fire & Gas detection system with signals to CCR

Workshop container with AC for

operation in Abu Dhabi desert (-20 to +55°C)

II2G

5

DIESEL POWER PUMP UNITS

Halvorsen diesel unit’s can be designed for permanent or

temporary installation.

Benefits:

Flexible internal layouts to suit your requirements

Extremely compact design

Good service access

Lifting approval according to DNV 2.7.1, DNV

2.7-3 or NORSOK R-002

ISO corners and forklift pockets

Approved for EX Zone 2 and safe area

Surface treatment Norsok M501 System 1

Noise and Fire isolation

Over pressured

High quality door(s)

Tie-in compartment for rig interface and cables

Power supply 230 VAC 50/60Hz

Fire & Gas detection system with signals to CCR

Diesel Hydraulic power pack module(s)

for drilling plant, Zone 2

II3G

6

GENERATOR

Halvorsen generator’s can be designed for permanent or

temporary installation.

Benefits:

Flexible internal layouts to suit your requirements

Extremely compact design

Good service access

Lifting approval according to DNV 2.7.1, DNV

2.7-3 or NORSOK R-002

ISO corners and forklift pockets

Approved for EX Zone 2 and safe area

Surface treatment Norsok M501 System 1

Noise and Fire isolation

Over pressured

High quality door(s)

Tie-in compartment for rig interface and cables

Power

- 230 VAC 50/60Hz230 to 690 VAC

- 50/60 Hz

- ~3000 kVA / 2400 kW

Fire & Gas detection system with signals to CCR1360 kW Generator module(s)

for temporary installation, Zone 2

II3G

7

TRANSFORMER

Halvorsen transformer’s can be designed for permanent or

temporary installation.

Benefits:

Flexible internal layouts to suit your requirements

Extremely compact design

Good service access

Lifting approval according to DNV 2.7.1, DNV

2.7-3 or NORSOK R-002

ISO corners and forklift pockets

Approved for EX Zone 1, 2 and safe area

Surface treatment Norsok M501 System 1

Noise and Fire isolation

Over pressured

High quality door(s)

Tie-in compartment for rig interface and cables

Power

- ~36 000 V

- 50/60 Hz

- ~10 000 kVA

Fire & Gas detection system with signals to CCR690 / 6600V, 2000kVA Transformer module

(12ft) for temporary installation, Zone 2

II3G

8

ELECTRIC PUMP UNITS

Halvorsen Electrical unit’s can be designed for permanent or

temporary installation.

Benefits:

Flexible internal layouts to suit your requirements

Extremely compact design

Good service access

Lifting approval according to DNV 2.7.1, DNV

2.7-3 or NORSOK R-002

Approved for EX Zone 1, 2 and safe area

High quality door(s)

Tie-in compartment for rig interface and cables

Power 230-400-440-480-660-690 VAC 50/60 Hz

Electric HP water pump module

Norsok Z-015, Zone 1

II3G

9

OTHER / CUSTOM DESIGN

Halvorsen can special designed all type of machines and

equipment for permanent or temporary installation.

Examples:

Heater tank

Fire Extinguishing system

Tank

Air dryer

Injection system

Mixing skid

SALE AND/OR RENTAL

Halvorsen system for Air Dehumidifying

DESCRIPTION:

The DDU (Desiccant Dehumidifier Unit) are built and documented according to NorsokZ-015.

Approved for operation in ATEX Zone 2 (II3G)

Gas detector in the inlet for shutdown if gas leakage

Fire damper in the inlet to secure unit if gas leakage

Dehumidifies to low dew-point

Temperature and humidity set point controls can be preset to specific conditions

Mounted in solid lifting SS316 Stainless Steel frame according to DNV 2.7-1

Wheels for ease moving on deck

Under 2m² in foot print

11II3G Ex nA nC de mb [ia/ib] IIC T3

Halvorsen system for Land to Ship Power

12

Description:

The SMART SPM (Ship Power Module) consists of 2 (two) Variable Frequency Drives (VFD) and 2 (two) transformers installed in a 20” container.

The advantage of using this type of converter as temporary power supply or test supply is that one unit can be used to supply different voltages and frequencies

The SMART SPM has separate input and output breakers and are ready for all input voltages between 380 to 500V or 690V and 50 or 60Hz and output voltages and frequencies between 400V to 690V and 50 or 60Hz

The SMART SPM can also be setup with other input/output voltages and frequencies than listed in technical data.

Power cable units also available

All according to: NEK IEC PAS 80005-3