UTG-8

Simple, smart, effective!

Easy as 1-2-3

Connect the probe Switch modes andview readings

Calibrate on a built-in block

1 32

Keys legend

Switch instrument ON and OFF

Probe zeroing

Run calibration

Switch between metric and english units

Switch Measure / Scanning modes.Increase current value

Switch backlight mode.Decrease current value.

UTG-8 characteristics

• Measurement range (steel): 0,63 – 500 mm• Sound velocities range: 1250 - 10000 m/s• Discreetness: 0,01 mm; .001 in; 1 m/s; .0001 in/us• Accuracy: .001 in; 0,03 mm• Dimensions: 35×70×125 mm• Weight: 176 g

Probe zeroing

1 point calibration

Setting of the known velocity

2 points calibration

Mode «MEASUREMENT»

“MEASUREMENT” mode is used for discrete points measurements. Reading stays onscreen after removing of the probe from the object.

Mode «SCANNING»

“SCANNING” mode is used for corrosion or other thin areas search. The minimum thickness over all scanning process is displayed after removing the probe from the object.