userData/300_e.ppt - CTI PLC, 505 TI PLC, Siemens PLC, …hankook-system.com/userData/300_e.ppt ·...
-
Upload
nguyenduong -
Category
Documents
-
view
260 -
download
1
Transcript of userData/300_e.ppt - CTI PLC, 505 TI PLC, Siemens PLC, …hankook-system.com/userData/300_e.ppt ·...
Automation and Drives
SIMATIC
S7-300
Automation and Drives
A&D AS SM 5, 03/2002 2
SIMATIC S7-300
SIMATICS7-300
Introduction
The CPUs
The Modules
Design, InstallationCommunicationsand HMI
Configuring
S7 PLC 패밀리
대형
S7-400
중형
S7-300소형
S7-200
+ 프로그래밍 로더 + STEP 7 소프트웨어+ 통신+ HMI
The universal PLC for system solutions with production engineering as focal point
Compact CPUs
Introduction
Automation and Drives
A&D AS SM 5, 03/2002 3
SIMATIC S7-300
SIMATICS7-300
Introduction
The CPUs
The Modules
Design, InstallationCommunicationsand HMI
Configuring
S7 - 300 특징
열악한 환경에 적합한 Outdoor 버전 Outdoor
Distributed Safety - S7-300F 와 ET 200M, ET 200S 를 결합한 fail-safe어플리케이션
FailsafeAufbau und Montage
C7 control systems S7-300 에 HMI 를 결합한 시스템 HMIIntroduction
Automation and Drives
A&D AS SM 5, 03/2002 4
SIMATIC S7-300
SIMATICS7-300
Introduction
The CPUs
The Modules
Design, InstallationCommunicationsand HMI
Configuring
S7 - 300 특징
세계 표준에 근거한 프로그래밍 소프트웨어 STEP 7 IEC 61131-3
강력한 자기 진단 기능 내장 Availability
쉽고 편한 STEP 7 Lite Intuitive operation
Introduction
Automation and Drives
A&D AS SM 5, 03/2002 5
SIMATIC S7-300
SIMATICS7-300
Introduction
The CPUs
The Modules
Design, InstallationCommunicationsand HMI
Configuring
CPU 모델
CPU 313 저 비용으로 시스템 구성
CPU 314중형 시스템 구성
CPU 315 (CPU 315-2 DP)PROFIBUS DP 인터페이스 내장
CPU 316-2 DP충분한 메모리 제공
CPU 318-2S7 - 400 기능 구현 ( 스캔 타임 0.1 µs)
CPU 312C, 313C, 314C특수 기능 모듈 , I/O 모듈 내장
The right CPU for every application
The CPUs
Automation and Drives
A&D AS SM 5, 03/2002 6
SIMATIC S7-300
SIMATICS7-300
Introduction
The CPUs
The Modules
Design, InstallationCommunicationsand HMI
Configuring
CPU 모델
프로그램 스텝사용자 메모리
Free AddressingDI / DOAI / AOCPU 수행속도
내부 메모리
카운터
타이머
통신 인터페이스
CPU 314 8 K / - 24 KB no
1024256 0,3 ms
2048 64 128
CPU 313
4 K / -12 KBno
25664 0,6 ms
2048 64 128
CPU 315(315-2 DP)16 (21) K / -48 (64) KB yes
10242560,3 ms
204864128PROFIBUS-DP interfaceMaster/Slave(with 64 DPstations)
CPU 316-2DP
42 K / -128 KByes
1024 2560,3 ms
2048 64128 PROFIBUS-DP interfaceMaster/Slave(with 64 DPstations)
CPU 318-2
84 K / 256 KB512 KByes
1024 2560,1 ms
8192 512512PROFIBUS-DPinterface (M/S; 125 DP stations);MPI usable as DP(12 MBaud)Technical Slides
The CPUs
Automation and Drives
A&D AS SM 5, 03/2002 7
SIMATIC S7-300
SIMATICS7-300
Introduction
The CPUs
The Modules
Design, InstallationCommunicationsand HMI
Configuring
New CPU
더 빨라진 프로그램 수행속도
엔지니어링 비용 절감 엔지니어링 툴 사용 모듈라 프로그래밍
운전 비용 절감 Micro Memory Card (MMC)
카드 사용 MMC 에 프로젝트 다운로드 MMC 로 프로그램 업데이트
모듈 크기 축소 모듈 크기 40 mm 로 축소
Innovation of the S7-300 family
CPUs
Automation and Drives
A&D AS SM 5, 03/2002 8
SIMATIC S7-300
SIMATICS7-300
Introduction
The CPUs
The Modules
Design, InstallationCommunicationsand HMI
Configuring
New CPU
사용자 메모리
Free AddressingDI / DOAI / AO프로그램 수행속도
내부 메모리
카운터
타이머
통신 인터페이스
CPU 314 48 KB yes1024256 0,1 ms
2048 256 256
CPU 312
16 KB
yes 25664 0,2 ms
1024 128128
CPU 315(315-2 DP)128 KB yes10242560,1 ms
16384256256PROFIBUS-DP-AnschlussMaster/Slave(mit 124 DP-Stationen)
CPUs
Start o
f deliv
ery
10/20
02
Start of delivery
10/2002
Automation and Drives
A&D AS SM 5, 03/2002 9
SIMATIC S7-300
SIMATICS7-300
Introduction
The CPUs
The Modules
Design, InstallationCommunicationsand HMI
Configuring
compact CPU - 특징
내장 기능 카운팅 , 속도 측정 , PID 제어 ,
위치제어 내장 I/O
디지털 I/O, 아나로그 I/O 내장 인터페이스
PROFIBUS-DP, MPI, PtP 수행속도 개선 Micro memory card
배터리 대용 심볼 , 코멘트를 포함한
프로젝트 다운로드 콤펙트 타입
The smart addition to the S7-300 familyCompact CPUs
The CPUs
Automation and Drives
A&D AS SM 5, 03/2002 10
SIMATIC S7-300
SIMATICS7-300
Introduction
The CPUs
The Modules
Design, InstallationCommunicationsand HMI
Configuring
MPI, PROFIBUS-DP 인터페이스 내장
인터페이스 모든 CPU 에 MPI 포트 내장 315-2 DP, 316-2 DP,
318-2 DP 에 DP 포트 내장 라우팅 기능 HMI 인터페이스
별도의 프로그램 필요없음 CPU 로드가 적음
S7 통신 기능 지원 별도의 하드웨어 없이 연결
Profibus-DP
S7-300
S7-300
PG (Master)
ET 200M (Slave)
ET 200B/L (Slave)
ET 200U (Slave)
ET 200X (Slave)
Technical Slides
The CPUs
Automation and Drives
A&D AS SM 5, 03/2002 11
SIMATIC S7-300
SIMATICS7-300
Introduction
The CPUs
The Modules
Design, InstallationCommunicationsand HMI
Configuring
Modules for S7-300
전원 (Power Supplies)전력별 여러 종류 지원
I/O 모듈 (Signal modules)디지털 , 아나로그 모듈 , 방폭형 모듈 지원
시리얼 통신 모듈 (Point-to-Point CP)RS 232 / 422 / 485
특수 기능 모듈 (Function modules)고속 카운터 / 위치 제어 / PID
Flexible combinations for all applicationsTechnical Slides
The Modules
Automation and Drives
A&D AS SM 5, 03/2002 12
SIMATIC S7-300
SIMATICS7-300
Introduction
The CPUs
The Modules
Design, InstallationCommunicationsand HMI
Configuring
디지털 모듈
전압 /전류 범위
채널 (optically isolated)
센서
해상도
엔코딩 시간
Ex (i)
자기진단
디지털 출력
DC 24 / 48...125 VAC 5...230 V0,5 / 1 / 2 / 5 A
8, 16, 32electr./ Relay
Namur / Ex(i)
yes
디지털 입력
DC 24...125 VAC 120 / 230 V
8, 16, 32
Switches, 2-wire Beros
Namur / Ex (i)
yes
Technical Slides
The Modules
Automation and Drives
A&D AS SM 5, 03/2002 13
SIMATIC S7-300
SIMATICS7-300
Introduction
The CPUs
The Modules
Design, InstallationCommunicationsand HMI
Configuring
아나로그 모듈
전압 /전류 범위
채널 (optically isolated)
센서
해상도
엔코딩 타임
Ex (i)
자기진단
아나로그 출력
+/- 10 V, 0...10 V,+/- 20 mA,0/4...20mA, u.a.
2, 4, 8
12 - 16 bit incl.sign bit
0,8 ms
Namur / Ex(i)
yes
아나로그 입력
+/- 80mV...10 V,+/-3,2mA, 0/4...20mA u.a.
2, 4, 8with integratedlinearization
2-,3-,4-wire resistor (Pt100),thermocouples
9 to 16 bit incl.sign bit
2,5 ... 100 ms
Namur / Ex (i)
yes
Technical Slides
The Modules
Automation and Drives
A&D AS SM 5, 03/2002 14
SIMATIC S7-300
SIMATICS7-300
Introduction
The CPUs
The Modules
Design, InstallationCommunicationsand HMI
Configuring
Point-to-point CP
1 / 2 인터페이스 76 kbit/s 통신 속도 지원
RS 232 / 485 표준 혹은 사용자 프로토콜
지원
Easy andflexible Programming
device, PC, computers
Robotcontrols
Opto-electronics
Printer
SIMATIC S5 and also PLCs from other manufacturers
Scanner, barcode reader,identification systems
Weighing systems,controllers
S7-300 S7-300
PtP CPs
The Modules
Automation and Drives
A&D AS SM 5, 03/2002 15
SIMATIC S7-300
SIMATICS7-300
Introduction
The CPUs
The Modules
Design, InstallationCommunicationsand HMI
Configuring
랙 확장
2 랙 확장 16 개 모듈 장착
--> 저 비용 설계
4 랙 확장 32 개 모듈 장착
--> 유연한 설계
Technical Slides
Central controller
Up to 10 m
Up to 10 m
Up to 10 m
Expa
nsio
n un
its
Design, Installation
Automation and Drives
A&D AS SM 5, 03/2002 16
SIMATIC S7-300
SIMATICS7-300
Introduction
The CPUs
The Modules
Design, InstallationCommunicationsand HMI
Configuring
With S7-300 to all communication networks
Data commu-nication
PROCES S FIELD BUS
Data and field communication
Fieldcommunication
Communicationsand HMI
Automation and Drives
A&D AS SM 5, 03/2002 17
SIMATIC S7-300
SIMATICS7-300
Introduction
The CPUs
The Modules
Design, InstallationCommunicationsand HMI
Configuring
S7 - 300 특징
다양한 종류의 Digital, Analog Module
고 기능의 작업을 위해 Runtime software, Functions integrated in
the CPU Function modules
Identical I/O modules for
centralized configurations distributed configurations
(ET 200M)
Application-specific solution for a wide
variety of tasks
Cost reduction for warehousing and
logistics
Introduction
Automation and Drives
A&D AS SM 5, 03/2002 18
SIMATIC S7-300
SIMATICS7-300
Introduction
The CPUs
The Modules
Design, InstallationCommunicationsand HMI
Configuring
S7 - 300 특징
Space-saving, modular design without slot rules for compact machine controls
Fanless operation without rotating parts
Versatile connection systems Screw-type terminal system Spring-type terminal system Prefabricated
(TOP Connect)
Less installation overhead
Reduced maintenance
costs
Introduction
Automation and Drives
A&D AS SM 5, 03/2002 19
SIMATIC S7-300
SIMATICS7-300
Introduction
The CPUs
The Modules
Design, InstallationCommunicationsand HMI
Configuring
S7 - 300 특징
Efficient processing speed for short machine cycle times
0.1 µs / binary instr.
Graduated line of CPUs - from the entry-level CPU to the high-capacity CPU
Communication via integrated interfaces
MPI PROFIBUS-DP
Integration
Introduction
Automation and Drives
A&D AS SM 5, 03/2002 20
SIMATIC S7-300
SIMATICS7-300
Introduction
The CPUs
The Modules
Design, InstallationCommunicationsand HMI
Configuring
Function Modules (FM) - for all technologiesThe right choice when ... tasks have to be taken
care of at top speed ... The very highest
accuracy and reproducibility are required
... Special sensors or actuators are required
... technological tasks require practical solutions
Counting, measuring,cam control, positioning, closed-loop control
Technology
The Modules
Automation and Drives
A&D AS SM 5, 03/2002 21
SIMATIC S7-300
SIMATICS7-300
Introduction
The CPUs
The Modules
Design, InstallationCommunicationsand HMI
Configuring
Test and diagnostics functions System diagnostics
Fault diagnostics from CPU to I/O
internal CPU services (e.g. error message with
time stamp)
Process diagnostics Monitoring critical
process signals at the program level
Simply assign parameters using S7-PDIAG and ProAgent
CPU generates messages automatically for S7 HMI So that your service personnel can diagnose the problem sooner
IncreaseProductivity
Shorten Down Times
The CPUs
Automation and Drives
A&D AS SM 5, 03/2002 22
SIMATIC S7-300
SIMATICS7-300
Introduction
The CPUs
The Modules
Design, InstallationCommunicationsand HMI
Configuring
모듈라 시스템
Rugged, enclosed modules Integrated, easy-to-connect
backplane bus High module density,
up to 32 channels per module Minimum mounting depth due to
recessed and covered connectors and plugs
Power supply modules in the case ofAC mains connection for supplying the S7-300 and sensors/actuators
Technical Slides
Design, Installation