User Training document - DHL Express Training Loftware.pdf · User Training document | Loftware 9...
Transcript of User Training document - DHL Express Training Loftware.pdf · User Training document | Loftware 9...
User Training document | Loftware
1 Version 1.0 `
LOFTWARE
User Training Document
User Training Manual: Version 1.0 Date: 17th July, 2015
User Training document | Loftware
2 Version 1.0 `
DOCUMENT HISTORY
Version Control
Version Date Updated By Summary of revisions
0.1 9th April, 2015
Ankit Mahajan First draft
1.0 5th June,2015
Abhishek Dutta Document
1.0 17th July,2015
Swathi Seshasayee Updated the methods to check some Local IT Issues.
Review and Sign-Off
Reviewer Date Version reviewed
Comments
User Training document | Loftware
3 Version 1.0 `
TABLE OF CONTENTS
1 INTRODUCTION 3
2 PRINTER CONFIGURATION 4
2.1 NETWORK PRINTERS 5
2.1.1 ISSUES RAISED 5
2.1.2
2.1.2.1
2.1.2.1.1
2.1.2.1.2
2.1.2.2
2.1.2.2.1
2.1.2.2.2
CORRECTIVE MEASURES
Common Issues : Issue –Printer IP Not Reachable
Issue Description
Issue Identification
Issue – Printer is in Error State
Issue Description
Issue Identification
5
5
5
5
6
6
6
User Training document | Loftware
4 Version 1.0 `
2.2 PRINTERS Connected to PCs 6
2.2.1 ISSUES RAISED 6
2.2.2 CORRECTIVE MEASURES 6
2.3 WEB PRINTERS 7
2.3.1 ISSUES RAISED 7
2.3.2 CORRECTIVE MEASURES 7
1.0 INTRODUCTION
Usage of Loftware – Loftware is a printing solution tool which houses all the printers
used by the Organization/warehouses globally. It ensures a predefined set of
templates are used across all sites for printing documents or labels.
Frequently raised issues that can be resolved by user himself or with the help of Local
IT.
2.0 PRINTER CONFIGURATION
The printers in Loftware can be configured as
User Training document | Loftware
5 Version 1.0 `
a) Network Printer
b) Printers connected to PC
c) Web Printer
2.1 NETWORK PRINTERS:
These printers are connected to a port in the warehouse, which is in the DHL network.
2.1.1 Issues Raised
a) Unable to Print or No prints received – The probable causes for this include change of printer
IP address, printer IP not reachable, printer is faulty, issue with port, local network issues etc.
2.1.2 Corrective Measure
a) Check with the local IT. Test the printer (by dropping simple test prints) and the port.
b) Check the printer page set up, ink and printer connections.
c) For change of IP address, raise a service request.
2.1.2.1. Common Issues : Issue – Printer IP Not Reachable
2.1.2.1.1.Issue Description
The IP address of the Printer is not able to be pinged which infers that the printer is not reachable.
2.1.2.1.2. Issue Identification:
1.Open Command prompt from the server and type the command
ping { Printer IP Address}
User Training document | Loftware
6 Version 1.0 `
The message will be displayed as shown in the above screenshot which means the printer is in error
state.
The ticket has to be raised to the Local IT Team saying that the IP Address of the printer is not reachable
(unable to ping).
2.1.2.2.Issue- Printer is in Error State (Label printers)
2.1.2.2.1.Issue Description
The Printer will be in the error state and so the printing will not happen.
1.1.2.2.2. Issue Identification:
The following are steps to be followed to confirm the issue:
1. Go to Control Panel Hardware Devices and Printers and search for the printer.
2. Under Status column of the printer (seen in detail View), if ‘Error’ is found, then the printer is in error
state.
User Training document | Loftware
7 Version 1.0 `
In case it is Large Icon view, Right Click the printer Printer PropertiesHardware tabDevice Status
as below:
If Device Status is not as mentioned in the above screenshot, the local IT Team has to be contacted as
the issue is related to the local printer settings .
User Training document | Loftware
8 Version 1.0 `
2.2 PRINTERS CONNECTED to PCs:
These printers (only Label Printers) are connected directly to a port of the PC/Laptop instead of
network port.
2.2.1 Issues Raised
a) Unable to Print or No prints received – The probable causes for this include change of PC host
name or IP address, Firewall issues, Printer not shared on the PC, Printer Driver not installed
correctly on the users’ machine, OS migration resulting in change in PC host name or IP address
etc.
b) Extra empty labels printed – The probable causes of this include incorrect page set up in the
local configuration, printer feed not done correctly or done at all.
c) Incomplete Labels printed – The probable causes of this include incorrect Label size set in the
printer properties.
2.2.2 Corrective Measure
a) Check with local IT or Desktop Support Team to check if the printer is connected and shared
on the PC.
The following steps need to be followed to check whether a printer is shared or not:
Please follow the below steps to check whether the printer is shared or not:
1. Go to Control Panel Hardware Devices and Printers .
2. Right click the printer and go to ‘printer properties’
3. In the Sharing tab, ensure that ‘Share this Printer’ is checked and a Shared Name is given in the
below text box. The screen shot is shown below:
User Training document | Loftware
9 Version 1.0 `
If not, the local IT Team has to be contacted initially to share the printer to the network. And then a
ticket has to be raised to configure the printer in Loftware server.
b) Test the printer by dropping simple test print.
c) If the print out is incorrect (vague language or garbage text), check the printer driver.
d) For extra labels, please press and set feed correctly on the printer.
e) Check for the label size set in the printer properties and set it to the correct required value.
f) For OS migration, which will result in change of PC Hostname or IP address, do inform the
AMS support Team beforehand.
g) Reconfiguration resulting from change in PC details should be raised as Service Request.
User Training document | Loftware
10 Version 1.0 `
2.3 WEB PRINTERS:
These printers are configured for the sites which are outside DHL network, UAG sites, where
VPN is used to connect to DHL network.
2.3.1 Issues Raised
a) Unable to Print or No prints received – The probable causes for this include web listener not
running, incorrect web listener configuration.
b) Network issues – This can cause VPN to disconnect, causing web listener to stop and thus,
resulting in printing interruptions.
2.3.2 Corrective Measure
a) Check the printer and its connections.
b) Install and configure the web listener utility as per the document shared by the AMS support
team.
User Training document | Loftware
11 Version 1.0 `
Links to download Loftware Web Listener version 10.2:
To download Loftware Web Listener version 10.2, please follow the below links:
For SeLECT: Login to http://select.dhl.com/help/FAQ.jsp - The web listener v.10.2 is
available at the bottom of the page, in the screenshot that is presented in the next page.
User Training document | Loftware
12 Version 1.0 `
For SeLECT UPGARDE: Login into the application using the URL https://spl.dhl.com/portal - the link is
available in left side bottom corner.
User Training document | Loftware
13 Version 1.0 `
Alternatively click on the FAQ page which will pop up FAQ window. The web listener v.10.2 is available
under download section.
c) Check the VPN connection and ensure that the web listener is running before the print is
triggered. (Status should be started)
User Training document | Loftware
14 Version 1.0 `
d) Check the web listener configuration, ensure that the details entered are correct and as
provided by the AMS support team.
URL: __________________ Port: __________________ User Name: _____________
The above information will be provided to you by the AMS Team. These details will have to be
entered in the fields, present in the screenshots below.