WIFI-CON

User ManualPart Number:

Important: Read all instructions prior to installation. DMX-4CH-5A

Parts Included

Specifications

Overview

4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 superbrightleds.com

DMX Decoder for LED DMX Controllers4 Channel, 5A

1 - DMX Decoder

Input Signal DMX512Input Voltage DC5V~DC24VMax Current Load 5A/CHx4CH 20A MaxMax Output Power 100W/240W/480W(5V/12V/24V)Output Gray Scale 256 Levels/CH(8bit/CH)DMX512 Socket XLR-3, RJ45, Green TerminalsWorking Temperature -30°C~65°CDimension 6.14in(156mm) x 3.07in(78mm)

1.57inx(40mm)Weight (G. W.) 15.17oz. (430g)

Product Dimensions

Side A Side B

3.07in 78mm

1.57in 40mm

(( )

( )

)( )

To next DMX decoder or DMX terminator

Side A Side B

3.07in 78mm

1.57in 40mm

(( )

( )

)( )

To next DMX decoder or DMX terminator

As figure 2, set the 6th, 3rd and 1st bit of the DIP switch downward to “1”, the rest to “0”, the total sum from 1 to 9 is 32+4+1, so the DMX512 initial address code is 37.

Set the 4th, 7th, 9th, bit of the DIP switch downward to “1” the rest to “0” (as Figure 3). the summation from 1 to 9 is 8+64+256, so the DMX512 original address code is 328.

As figure, FUN=ON: test function: 1-9DIP switch =OFF: BLACK

1-7 is to set 8 speed levels.7 is the fastest level, while dip switch 1-7=OFF: the speed is 0.

As figure, the color changing mode is selected with a speed level of 7 when all the dip switches=ON.

For example: Set initial address to 37.

Example 2: set initial address to 328.

Testing Function.

Figure 1 Figure 2

Figure 3

When FUN=OFF, Decoder is DMX controlling modeWhen FUN=ON, Decoder is in self-test mode.

Setup

DIP 1 2 3 4 5 6 7 8 9 10Address 001 002 004 008 016 032 064 128 256 FUN

DIP 1 DIP 2 DIP 3 DIP 4 DIP 5 DIP 6 DIP 7 DIP 8 DIP 9Red Green Blue Yellow Purple Cyan White Jump Gradual

Accepts DMX512 signal only when the DIP switch FUN=OFF, as Figure 1

SpecificationsDMX512 initial address code is equal to the total amount of the DIP switches numbered from 1 to 9, Placing the DIP switch in the DOWN position sets it’s value to ON. Placing the DIP switch in the UP position sets it’s value to OFF.

OFF

ON

OFF

ON

OFF

ON

OFF

ON

OFF

ON

DIP 1 DIP 2 DIP 3 DIP 4 DIP 5 DIP 6 DIP 7Speed 1 Speed 2 Speed 3 Speed 4 Speed 5 Speed 6 Speed 7

DMX-4CH-5A Decoder converts the universal standard DMX512 signal into PWM signal to drive LED products. This compact decoder works with DMX512 Console, with 256 levels of gray scale output per channel. 0-100% brightness and various changing effects. DMX-4CH-5A is equipped with a DMX standard XRL-3, green terminal interface, RJ45, and it can control single color, two color, three color, RGB, or RGBW LED lights.

WIFI-CON

User ManualPart Number:

DMX-4CH-5A

Connection Diagram for LED lights

Connection Diagram for DMX signal

Installation Notes

Warranty Agreement

4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 superbrightleds.com

1. A Lifetime Warranty is given from the date of purchase. The warranty is for free repair or replacement and covers manufacturing faults only.

2. Warranty exclusions:• Any man-made damages caused from improper

operation, or connecting to excess voltage and overloading.

• The product appears to have excessive physical damage.• Damage due to natural disasters and accidents.

3. Repair or replacement as provided under this warranty is the exclusive remedy to the customer. We shall not be liable for any incidental or consequential damages for breach of any stipulation in this warranty.

4. Lifetime warranty is valid for the original purchaser only and is not transferable.

1. The product shall be installed and serviced by a qualified person.

2. This product is non-waterproof. Avoid the sun and rain. When installed outdoors please ensure it is mounted in a waterproof enclosure.

3. Good heat dissipation will prolong the working life of the controller. Ensure good ventilation.

4. Check if the output voltage of any LED power supplies used comply with the working voltage of the product.

5. Ensure that adequate sized cable is used from the controller to the LED lights to carry the current. Also ensure that the cable is secured tightly in the connector to avoid the accidents due to overheat and poor contact on the wire.

6. Ensure all wire connections and polarities are correct before applying power to avoid any damages to the LED lights.

7. If a fault occurs return the product to your supplier. Do not attempt to fix the product by yourself.

DM

X-4

CH

-5A

Side A Side B

3.07in 78mm

1.57in 40mm

(( )

( )

)( )

To next DMX decoder or DMX terminator

DC

5V-24V