User Guide for Octopus Wi-Fi Printing Service · ROOM BOOKING SYSTEM LIBRARY WORKSHOPS PRINT, copy...
Transcript of User Guide for Octopus Wi-Fi Printing Service · ROOM BOOKING SYSTEM LIBRARY WORKSHOPS PRINT, copy...
User Guide for Octopus Wi-Fi Printing Service Please follow the steps below to install the printer driver and configure your own notebook:
1. Download the Wi-Fi printing driver
2. Double click the driver (exe file) and click “Yes” button
3. Select "1" to Install Print Driver
If this happen, please run the following command at the DOS prompt.
cscript //h:cscript //s
4. (optional) Some users reported that the following box prompt out during the
installation.
Right click the Command Prompt and select “Run as Administrator”
Windows 8 Windows 10
Select "Yes" from the prompt
For Windows 8 / 10 users, you may need to follow the procedure below to type
in the command:
Search cmd from the Apps screen
Enter the following command at the Command Prompt: cscript //h:cscript //s
5. Connect to CUHK Wi-Fi (SSID: CUHK, CUHKa, CUguest, eduroam, Universities
WiFi) and select the corresponding “Wi-Fi Printing / Copier” driver for your location
6. You may check the Printing Preferences if needed and click “OK”
7. Enter a “User ID” and “Password” that you like and click “OK”
Notes: Both User ID and Password can be set by the user. User ID can only made of a maximum of 8 alphanumeric characters (a-z, A-Z, 0-9). Password can only be made of 4-8 digit numbers (0-9).