User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
-
Upload
suizashare -
Category
Documents
-
view
222 -
download
0
Transcript of User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
1/36
Copyright 2007 Z50095 rv07 Bugaboo International BV. The information contained herein is
subject to change without notice. Bugaboo International BV shall not be liable for technical errors
or omissions contained herein.
The purchased product may differ from the product as described in this user guide.
Our most recent user guides can be requested at our Service departments (see comments) or atwww.bugaboo.com.
eng
engenglish
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
2/36
eng
content
introduction 4
. basic steps 8
2. assembling the bassinet 9
. assembling the seat 2
4. various uses o bassinet and seat 2
5. using the seat saety belts 25
6. ftting the underseat bag 27
7. going outdoors with the bugaboo cameleon 28
8. protection against weather and wind
9. travelling and storage 6
0. maintenance 8
. accessories 9
limited warranty 40
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
3/36
eng
4introduction
Congratulations on the purchase o your patented Bugaboo Cameleon. The BugabooCameleon is renowned or its versatility and saety (bassinet, pushchair and buggy complywith ASTM Standards F8-05a, F294-04 and F 2050-0). You and your child will besurprised by the Bugaboo Cameleons possibilities. We wish you a great deal o pleasurewith your Bugaboo Cameleon. Please remember to complete and return the warranty cardas soon as possible, so that you can be certain o receiving the best service and warrantyrom Bugaboo. This can be done either by visiting our website or by returning theenclosed prepaid warranty card.
before you start- Read the user guide careully beore you use the product and keep the guide or uture reerence.
Your childs saety may be in danger i you do not review all warnings and ollow use and
assembly instructions careully.
- Additional instructions and warnings are afxed to the Bugaboo Cameleon and should be
reviewed independently prior to use.
- This user guide is or the Bugaboo Cameleon, item code number 700.
- You will fnd a sticker with the model number and serial number on the center axle o the chassis.
Write this down or reerence and warranty registration.
- Check what you have received
Check the contents o the box against the list below. I anything is missing, please contact your supplier.
the box with the bugaboo cameleon comprises the ollowing parts: chassis with handlebar, parking brake and wrist strap
2 swivel wheels (with adjustable suspension)
2 large wheels (with oam flled tyres)
rame (base or seat and bassinet)
carry handle
base underseat bag
base bassinet abric with base plate and plastic fllets
base mattress (oam mattress with nylon cover, mattress cover, aerated inlay)
base seat abric with saety belts
canopy rame (2 canopy wires and 2 canopy clamps)
rain cover
mosquito net user guide
Bugaboo demonstration DVD
warranty card
the box with the tailored abrics includes the ollowing parts: tailored apron
tailored seat abric
tailored sun canopy
BUGABOO, the Bugaboo logos, FROG, GECKO and CAMELEON are registered, pending or claimed trademarks o Bugaboo.
The Bugaboo strollers are patented. The Bugaboo strollers models are protected.
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
4/36
eng
5WARNINGS Failure to ollow these warnings and instructions could result in serious injury or
death. Failure to review and heed these warnings could result in death or serious injury
to your child. Keep plastic bags and other packing materials that may pose a suocation
hazard away rom children and saely discard them as soon as possible. Do not use the Bugaboo Cameleon i any part or component appears to be
broken, damaged or missing. Discontinue use o the Bugaboo Cameleon incase o malunction.
Be certain that all components (e.g. chassis, rame, seat/bassinet attachmentdevices) are correctly engaged beore you allow a child near the BugabooCameleon (see assembly instructions). Failure to attach properly could result inserious injury or death to your child.
Audible click must be heard in order to determine that each lock is in properposition. To ensure proper locking engagement, check to see that the seat /carryhandle cannot be disengaged rom the stroller without unlocking the device.
Care must be taken when olding and unolding the product to prevent fngerentrapment.
NEVER use the Bugaboo Cameleon as a means to transport an inant in a motorvehicle. Transport your child by car in an approved car seat. Approved car seatscan be used in conjunction with the Bugaboo Cameleon chassis using Bugabooadapters (see accessories).
Do not carry more than one inant in the Bugaboo Cameleon. The Bugaboo Cameleon is not intended or inants in excess o 17 kg/40 lbs. The bassinet is not recommended or inants in excess o 9 kg/19.8 lbs in weight
or 76cm/30 inches in length. Only use the bassinet on level suraces and only in the horizontal position to
avoid ejection o the child rom the bassinet. NEVER place seat or bassinet on beds, soa or other sot suraces as they may
roll over when the child shits weight causing a potential suocation hazard. NEVER place seat or bassinet near edges o counter tops, tables, and other
elevated suraces. Childs movement can cause devices to slide o suchsuraces.
NEVER use the bassinet as a car bed.
Do not use a mattress in the bassinet with a thickness in excess o30 mm/1.2 inches.
The seat is not recommended or children under 6 months o age, or or anychild unable to maintain an unaided sitting position.
Make seat adjustments beore the child is seated. Adjustments made whilethe child is seated may result in the child alling.
Beore picking up the seat by the carry handle, always check to ensure that thehandle is properly secured.
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
5/36
eng
6 WARNINGS Never pick up the Bugaboo Cameleon and chassis by the carry handle while
your child is lying or sitting in the bassinet or seat. Always use the saety eatures o your Bugaboo Cameleon, including locking
devices, brakes, the 5-point harness (when child is seated), touch asteners,and the wrist strap attached to the handle bar (see instructions oradditional inormation). Check and maintain all saety eatures requently.
NEVER leave your child in the Bugaboo Cameleon when harness straps areundone. Your child could strangle in loose straps.
Do not apply parking brake while the Bugaboo Cameleon is moving. Never leave your child unattended. Always keep child in view while in the
Bugaboo Cameleon. Never attach purses, shopping bags, diaper bags or other packages or similar
items attached to the handle bar as they may change the balance o theBugaboo Cameleon and cause a hazardous condition.
Excessive weight may cause a hazardous unstable condition to exist. I package carrying items are added onto the product unstable hazardous
conditions may exist. The product will become unstable i the manuacturers recommended load is
exceeded. The Bugaboo Cameleon should be used at walking speed and should never
be used while jogging, skating or running. Take your child out o the Bugaboo Cameleon when going up or down stairs,
escalators or around steep or unstable conditions. Also, use extreme carewhen going up or down a curb or other uneven surace.
Do not stand on the axles between the wheels. This is unsae and coulddamage the Bugaboo Cameleon.
Do not allow the Bugaboo Cameleon to be used as a toy. Do not use the Bugaboo Cameleon near open fames and other sources o heat. Avoid exposing the Bugaboo Cameleon to extreme temperatures. Only use authentic Bugaboo replacement parts and accessories or accessories
approved by Bugaboo or use with the Bugaboo Cameleon. The Bugaboo Cameleon rame (no. 71100) should only be used with the
Bugaboo Cameleon chassis (no. 71101). Do not use Bugaboo Cameleon parts orcomponents with any non-approved stroller or other device or with any
other Bugaboo product. Additional warnings and saety inormation appear in the assembly, use and
accessory sections o this Guide as well as on the Bugaboo Cameleon itseland should be reviewed independently.
To reduce the risk o SIDS; Pediatricians recommend healthy inants be placed ontheir backs to sleep, unless other wise advised by Physician on Product.
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
6/36
eng
7assembly and use
The Bugaboo Cameleon is easy to assemble and prepare or use. It is advisable to repeat actions
a couple o times when indicated. This section explains how to assemble the Bugaboo Cameleon.
The subjects are the chassis, swivel wheels, large wheels, unolding the chassis, parking brake,
adjusting the handlebar, rame and carry handle. Each basic step in the Bugaboo Cameleons
assembly is explained separately in the text boxes. It is advisable to practice the basic steps. All
parts ft together properly, so no orce is necessary. I you fnd a step difcult, reread the instructions
and try again to execute that step. Do not proceed until you have executed each step properly and
completely.
importantAlways assemble the Bugaboo Cameleon:
- without the child in the seat or bassinet (unless indicated otherwise)
- with the parking brake on (unless indicated otherwise).
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
7/36
d
a
eng
81. basic steps
chassisThe chassis is the main component o the Bugaboo Cameleon. The Bugaboo Cameleon rame
clicks into the chassis and becomes the base or the bassinet and seat.
The parts are attached to the chassis. The chassis is comprised o the ollowing components:
- axle or the large wheels;
- axle or the swivel wheels with holder;
- handlebar with rame bearers, parking brake and wrist strap.
You also need the ollowing or the assembly:
- 2 swivel wheels;
- 2 large wheels.
Frame and carry handle complete the chassis or urther assembly.
step 1 folding out the chassis and handlebar
a Place the chassis with the 4 points on the foor.
b. Stand with the handlebar in ront o you.
c. Hold the handlebar lightly in your hands. Do not push.
d Pull the 2 white buttons on the outside o the handlebar
towards you.
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
8/36
e
a
b
c
eng
9e Move the handlebar upwards and away rom you and
let go o the white buttons. You hear a click when the
handlebar is upright.
swivel wheelsThe swivel wheels provide optimum maneuverability.
step 2 placing the swivel wheels in the holders
a Without releasing it, move the handlebar to the foor.
The wheel axles are now acing upwards. This enables
you to t the wheels without having to bend down ar.
b Move the white sliding buttons upwards. These are
the swivel wheel locks.
c Stand with wheel axles in ront o you. With the wheel
acing upward and the wheel lock acing away rom you,
push the swivel wheel into the holder.
d. You will hear a click or each wheel. The swivel wheels
are now attached.
Important Do not t the swivel wheels on the wrong side o
the holder.
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
9/36
b
b
c
eng
0
other functions
removing the swivel wheels from the holdersa. The swivel wheel has a round button which protrudes through the holder.
The button has 2 sprung lips.
b Push on the 2 lips and remove the swivel wheel from
the holder.
c. Do the same on the other side.
swivel wheels unlockeda. Push down the swivel locks.
b. The swivel wheels are unlocked.
c. The Bugaboo Cameleons maneuverability is highest
with this setting.
swivel wheels lockeda. Push up the swivel locks.
b. The swivel wheels are locked.
c. The Bugaboo Cameleon now moves in a straight line.
adjusting the swivel wheelsThe suspension is usually adjusted to the lightest setting.
a. Set the swivel wheels to locked.
b Pull down the white spring clamp.
c Slide the white spring clamp to one of the 4 positions.
d. Fasten the spring on both swivel wheels in the
same position.
Important Push the spring clamp off the frame (if the swivel
wheels are locked). The suspension becomes
tighter. For ongoing optimum comfort,
Bugaboo recommends adjusting the spring one
notch for every 5 kg/ lbs of load (child +
baggage in the underseat bag).
Important The adjustable suspension of both swivel wheels
should be in the same position to avoid hazardous
situation.
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
10/36
a
a
b
eng
large wheels
The 2 large wheels have tires flled with polyurethane oam. These provide enduring suspension on
both sides without the risk o a puncture. This will thereore guarantee the driving comort or you
and your child.
step 3 fitting the large wheels to the axle
a Push the large wheels into the wheel holders at the ends
o the long axle.
b. You will hear a click or each wheel.
The wheels are now attached.
other functions
removing the large wheels rom the axlea Squeeze the wire clamp together that is located on the
inside o a large wheel.
b Remove the wheel rom the axle; repeat on the other side.
Important The large wheels cannot be removed rom the axle
i the Bugaboo Cameleons parking brake is on.
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
11/36
b
c
eng
2unolding the chassis
Move the handlebar up to unfold the chassis. The large wheels are on the ground. Release the
handlebar and click it in position between the large wheels. The chassis is now folded up.
step 4 unolding the chassis
a. Stand with the handlebar and large wheels in front of you.
b Pull the two white release knobs towards you and lift.
Release the knobs and raise the handlebar until it
clicks into the fastened position.
c Push your foot against the axle of the swivel wheels.
d. The swivel wheels are released. The chassis is now
standing on 4 wheels.
WARNINGS Care must be taken when olding and unolding the chassis to prevent fnger
entrapment.
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
12/36
a
a
b
eng
parking brake
The parking brake is on the handlebar. It prevents the large wheels rom turning. Always apply the
Bugaboo Cameleons parking brake when the stroller is stationary so it cannot roll away. When the
handlebar is above the large wheels, the parking brake is on the right on the handlebar, with the
release button on the outside.
step 5 applying the parking brakea Push the parking brakes handle away rom you and
downwards.
b. When the handle will not move any urther, the Bugaboo
Cameleons parking brake is on.
Important You will be able to eel when the parking brake is
working properly. Do not orce the parking brake.
other functions
releasing the parking brakea Grip the handle tightly with one hand. Press the white,
round button on the handle with the other hand and
move the handle towards the handlebar.
b. The parking brake is now o.
Note I you press the white, round button on the handle
without holding the handle tightly, the parking brake
will be released suddenly. To avoid injury, do not place
your fngers between the handle and the handlebar.
Note Release the Bugaboo Cameleons parking brake beore
removing the large wheels rom the axle.
adjusting the parking brakea. Place the handlebar above the large wheels.
b Screw the brake cable adjuster upwards. The brakecable is on the thin axle, next to the wheel on the right.
This reduces the braking orce.
c. Screw the brake cable adjuster down to increase the
braking orce.
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
13/36
b
a
eng
4 WARNINGS Only apply the parking brake when the stroller is stationary. The brake lever must
be in its lowest position to lock.
adjusting the handlebarYou can adjust the length o the handlebar.
step 6 adjusting the length of the handlebar
a Turn both butterfy nuts on the outside o the handlebar
counter-clockwise.
b This loosens the handlebar. Adjust it to the correct height.
c. Turn the butterfy nuts clockwise to tightten the handlebar
in place.
WARNINGS Check that the handlebar is properly fastened.
Important Butterfy nuts must be in a tightly secured position when the handlebar is fipped to the
reverse side to ensure the handlebar securely locks into place.
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
14/36
a
d
clickclick
b
eng
5frame
The frame is fastened to the chassis; the chassis is then secured. The bassinet or seat is fastened to
the frame. The frame has 2 frame supports, which click onto the 2 frame bearers. The round side
of the frame is always the head end of the bassinet or seat.
step 7 fitting the frame on the chassis
a Completely fold out the 2 frame supports.
b. Fit the frame supports on the frame bearers.
c. Hold the frame horizontal.
d Press the frame downwards until you hear a click on
both sides. The frame is now attached to the chassis.
WARNINGS To check whether the frame is attached to the chassis, pick up the frame. If the
frame releases one or both sides of the chassis, press the frame onto the chassisagain until you hear a click on both sides.
other functions
placing the frame in different positionsa. Place the frame on the chassis.
b Simultaneously press in the 2 round, white buttons at
the top of the frame supports.
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
15/36
c
b
c
eng
6c Tip the rame orward and choose a position.
WARNINGS Only the seat can be used in 3 positions on the frame. The bassinet can only be
used horizontally (See WARNINGS Section).
removing the rame rom the chassisa. Place the rame in the horizontal position.
b Simultaneously press the 2 square, white buttons on the
rame supports to release the rame.
c Pick up the rame.
d. Place the rame on the foor, resting on the rame supports.
Important The 2 square, white buttons are always used to
remove the rame, with the bassinet or the seat,beore it is placed it on the foor.
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
16/36
b
b
d
click
click
eng
7turning the rame aroundYou can turn around the rame to change the seat and bassinet options.
a. Remove the rame rom the chassis.
b While holding the rame in the horizontal position,
turn it around.
c. Place it back on the chassis.
carry handleThe carry handle fts on the rame. You can easily pick up and turn around the bassinet or seat
using the carry handle.
step 8 fitting the carry handle to the frame
a. There is a white button at each end o the carry handle.
b Press and hold in the white button on one side.
c. Place one end o the carry handle above one o the
holes in the center o the rame.
d Push it into the hole. You will hear a click.
e. Repeat this or the other side. The carry handle is
securely astened.
Important Remove the carry handle by pressing the white
button in on one side and pulling out the carry
handle. Repeat this or the other side.
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
17/36
c
eng
8practicing
Now you have assembled the chassis you can:
old out the chassis;
release, move and adjust the height o the handlebar;
ft and remove the swivel wheels;
activate and de-activate the swiveling action o the swivel wheels;
adjust the suspension o the swivel wheels;
ft and remove the large wheels;
use the parking brake;
ft, remove and turn around the rame;
place the seat in dierent positions; and
ft and remove the carry handle.
2. assembling the bassinet
The bassinet consists o the rame, the bassinet abric, with base plate, mattressand the apron. Touch asteners ensure that the bassinet hangs securely in therame.
step 1 attaching the bassinet fabric to the frameThe round side o the bassinet abric fts in the round side o the rame.
a. Fit the rame (horizontally) onto the chassis.
b. Unasten the touch asteners.
c Fasten the 2 touch asteners tight to the rame,
in the order to 6.
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
18/36
d
a
a
eng
9d Fasten the touch asteners to the rame supports below
the square, white buttons.
Important Make sure the plastic fllets at the top and bottom
stay in their bags.
step 2 fitting the mattress
a Place the round side o the mattress on the round side
o the bassinet, with the cover opening acing
downwards.
step 3 fitting the tailored apronThe apron protects the child against the cold and is ftted to the oot end o the bassinet.
a Zip the apron onto the bassinet. First make sure that the
runners at the end on the let are next to each other.
b. I you use the sun canopy, pull the aprons small elastic
bands over the hooks o the sun canopys clamps
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
19/36
b
c
eng
20see section 8 on itting the sun canopy.You can leave the apron on the bassinet when tting the sun canopy, rain cover and mosquito net.
3. assembling the seat
The seat comprises the seat abric, which is pulled over the rame. The seatabric is itted with back pad supports, oot support and seat pad. The seat has2 shoulder belts, 2 waist belts, crotch belt and tensioning belt with metalO-rings. When astened together, the waist belts should stay in place at theheight o their attachment.
step 1 placing the seat fabric on the frame
a. Fold out the rame supports and place the rame on
the foor.
b Slide the rounded upper side o the seat abric over the
round side o the rame, with the Bugaboo logo acing
orward. Pull on the seat abric so that it ts tightly.
c Place one O-ring o the tensioning belt over the
protruding pin on the side o the rame.
d. Place the rame on that side to asten the O-ring on the
other side.
e. Lean on the rame and push it inwards a little. Take holdo the tensioning belt and pull the other metal O-ring
over the protruding pin.
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
20/36
click
h
i
eng
2 Fasten the two ends o the tensioning belt together
underneath the seat area. You should hear a click.
Pull the belt until it is tight.
g. Put the tailored seat abric over the base abric. Pull the
shoulder belts and the waist belts through the tailored
seat abric. Then attach the tailored seat abric to the
base abric with the touch asteners.
h Now give shape to the seat by olding the seat pad
inwards.
i Attach the 2 touch asteners at the oot end to
the underneath the rame.
Important Make sure the carry handle is not attached to the
rame while trying to pull the tensioning belt over
the protruding pin.
Important Assemble the seat beore ftting it onto the chassis.
The seat cannot be placed on the rame until it
has been assembled.
WARNINGS Ensure that the touch fasteners and tensioning belt are fastened
properly.
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
21/36
eng
224. various uses of bassinet and seat
You can use the bassinet from the childs birth until the child is aged around 6months. It is only intended for children who cannot sit or get up onto their handsand knees unaided. Do not use the bassinet for children who are longer than76 cm/0 inches or heavier than 9 kg/9.8 lbs. You can use the seat for childrenolder than 6 months if they weigh less than 7 kg / 40 lbs.(See WARNINGS Section).
bassinetThe child is able to lie down completely in the bassinet. This means the childs spine is not under
any stress and the child can stretch his/her legs. For use as a pram, only place the bassinet hori-
zontally on the chassis. The bassinet can be turned around easily. This enables you to see into the
bassinet and the child can look at you. The bassinet can also be used separately from the chassis.
The bassinet can also be used as a bassinet.
Important When carrying the bassinet with child by the carry handle, its position should be
horizontal at all times. Place one hand at the edge of the frame to stabilize and to
correct. With your other hand you carry the weight. Keep the weight as close to your
body as possible.
WARNINGS Only use the bassinet on a level, solid surface. Only use the bassinet in the horizontal position. In any other position, the child
may slide or fall out of the bassinet. Ensure that all the touch fasteners are securely fastened before use. NEVER use the bassinet as a car bed. Avoid injurious or fatal accidents. NEVER use the bassinet fabric when it is not attached to the frame. Before picking up the bassinet by the carry handle, always check that the carry
handle is properly secured. Never pick up the Bugaboo Cameleon and chassis by the carry handle while
your child is lying or sitting in the bassinet or seat. Use a harness as soon as your child can sit unaided.
Do not use the infant carrier if it is damaged or broken. Fall Hazard: Childs movement can slide carrier. NEVER place carrier near edges
of counter tops, tables, or other elevated surfaces. Infant carriers are not intended for use as infant restraint devices in motor
vehicles. NEVER use this carrier as a means to transport an infant in a motor vehicle. Suffocation Hazard: Infant carrier can roll over on soft surfaces and suffocate
child. NEVER place carrier on beds, sofas, or other soft surfaces. SUFFOCATION HAZARD: Infants can suffocate:
- in gaps between an extra pad and side of the bassinet/cradle.
- on soft bedding.
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
22/36
eng
2WARNINGS NEVER add a mattress, pillow, comorter, or padding. Use ONLY the pad provided
by the manuacturer. IF a sheet is used with the pad, use only the one providedby the bassinet or cradle manuacturer or one specifcally designed to ft thedimension o the bassinet or cradle mattress.
FALL HAZARD: To help prevent alls, do not use this product when the inantbegins to push up on hands and knees or has reached manuacturersrecommended maximum weight, whichever comes frst.
seatYou can set the seat to one of three positions. This is only possible if the seat is on the chassis.
The positions are:
. sitting
2. reclining
. lying
Important The childs posture (angle between the back support and seat pad) should remain the
same in the positions.
The seat can be turned around easily. This enables you to see the seat and the child can look at
you. The seat can also be used separately from the chassis. You can use the seat as a free-stand-
ing seat on the ground, if you fold out the frame supports completely.
WARNINGS Beore picking up the seat by the carry handle, always check that the carry
handle is properly secured.
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
23/36
d
or
e
click click
click click
eng
245. using the seat safety belts
The Bugaboo Cameleon seat has a 5-point harness, which is comprised o 2shoulder belts, crotch belt and 2 waist belts.Use the saety belts when the child is sitting in the seat. Prevent the child romalling out o the seat and being injured.
step 1 using safety belts
a. Fit the seat to the chassis (with the brake applied) or
on the foor.
b. Place the child in the seat.
c Pull the crotch belt orwards between the childs legs.
d Attach the waist belts over the childs waist to the crotch
belt. Tighten the belts to t the child.
e Attach the shoulder belts over the childs shoulders to
the waist belts. Tighten the belts to t the childs length.
. You should now have heard a click 4 times. This
means the child is sitting securely in the Bugaboo
Cameleon seat.
The Bugaboo Cameleons bassinet and rame are tted with extra astening rings. I required, you
can use them to attach an extra harness or extra belts. The astening rings are attached to the base
o the bassinet. The waist belts with extra astening rings are attached to the rame.
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
24/36
eng
25WARNINGS Ensure that all the touch asteners are securely astened beore use. Always use the crotch strap in combination with the waist straps. Always secure the child in the seat belts. Avoid being caught o guard by the
child making unexpected movements. The saety belts must be adjusted to ft the child and must be properly secured. Avoid serious injury rom alling or sliding out. Always use the 5-point harness.
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
25/36
b
c
d
eng
266. fitting the underseat bag
The underseat bag hangs under the bassinet or seat.
step 1 fitting the under seat bagThe under seat bag is fastened between the wheels of the chassis.
a. Remove the frame from the chassis.
b Fit the under seat bag to the chassis between the
axles of the wheels with the Bugaboo logo facing the
large wheels.
c Attach the 2 touch fasteners to the upper center shaft.
d Attach the other 2 touch fasteners to the
supports of the swivel wheels.
Important The under seat bag is made to carry a maximum
weight of 4 kg/8.8 lbs.
Before use, ensure that all the touch fasteners
are properly attached.
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
26/36
b
b
c
eng
277. going outdoors with the bugaboo cameleon
The Bugaboo Cameleon is designed or use in the city, in rough terrain or in the2-wheel position.
city positiona. Use the 4-wheel position.b Place the handlebar above the large wheels.
c. Do not lock the swivel wheels.
This is the Bugaboo Cameleons most maneuverable setting.
rough terrain positiona. Use the 4-wheel position.
b Place the handlebar above the swivel wheels.
c. Put the swivel wheels in the locked position.
With the large wheels in ront, you can easily push the stroller
over uneven ground.
2-wheel positionUse the Bugaboo Cameleon in the 2-wheel position and remove the swivel wheels.
step 1 putting the chassis in the 2-wheel position
a. Remove the rame rom the chassis.
b. Place the handlebar above the swivel wheels.
c WITHOUT releasing the handlebar, swivel it to the other
side, until it is lying on the foor.
d. Push the clamps o the swivel wheels tightly onto the
thin axle.
e. Remove the swivel wheels. Check that the large wheels
are properly attached.
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
27/36
e
click
click
eng
28 Raise the handlebar. The chassis is now in the
2-wheel position.
step 2 fitting the seat
a. Apply the parking brake.
b. Lay the chassis on the foor with the rame bearers
acing upwards.
c. Completely old out the seats 2 rame supports.
d. Place the seat on the rame bearers.
e Push until you hear a click on both sides. The seat is
now attached to the chassis.
Lit the handlebar up and place the seat in the correct
position.
g. Allow the handlebar to go down. Now place the child
in the seat.
h. Fasten the 5-point harness.
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
28/36
i
eng
29i Place the wrist strap on your wrist.
j. Release the parking brake. The stroller is now ready for
use on the beach.
surface that is difficult to traverse, or snow.Use the Bugaboo Cameleon in the 2-wheel position if the ground is roughor covered with snow or
covered in loose sand. Choose the 4-wheel position if the ground is hard or compact sand. You will
develop your own preferences for this.
wrist strapAlways use the wrist strap. Ensure that the handlebar does not slip out of your hands.
WARNINGS Never release the handlebar in the 2-wheel position. The seat may tip over and
the child may fall out and be injured. The 2-wheel position provides much less sideways stability than the 4-wheel
position. The 2-wheel position is not intended to be used on vertical surfaces orterrain. Use of the 2-wheel position on such surfaces could result in tipping orloss of control.
Ensure that all the touch fasteners are securely fastened before use. Remember that the seat cannot be turned around in the 2-wheel position. Never use the 2-wheel position in combination with the bassinet. Use the wrist strap in the 4-wheel position as well as the 2-wheel position. Remove the swivel wheels when using the stroller on the beach.
The Bugaboo Cameleon is not resistant to saltwater. Do not push it in the sea.
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
29/36
a
d
eng
08. protection against weather and wind
The standard version of the Bugaboo Cameleon comes with a sun canopy, raincover and mosquito net, so you can protect the child against the sun, wind andrain, as well as insects. The necessary steps to make the Bugaboo Cameleonready for use in good or bad weather are the same for the bassinet and the seat.
Important The sun canopy, the rain cover and the mosquito net can be used in combination with
the seat up to a length of 5 cm/20.9 inch of the upper body of the child (measured from
the bottom of the childs behind to the top of its head).
tailored sun canopyThe sun canopy comprises 2 canopy clamps, 2 removable frames and the tailored fabric.
step 1 preparing the tailored sun canopy for use
a Pull the frames out of the canopy clamps.
b. Lay the sun canopy down with the logo facing
downwards.
c. Push the frames through the slots in the sun canopy
fabric.
d Put the canopy clamps back on the frames. Put the
canopy clamp marked right arm side of child on the
side with the Bugaboo label and with the text on the
outside.
e. Put the canopy clamp marked left arm side of child on
the other side, also with the text on the outside.
Important The hooks/arrows/brackets on the canopy
clamps should always point to the back of thesun canopy.
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
30/36
d
f
g
clickclick
eng
step 2 itting the tailored sun canopy
a. Fit the bassinet or seat onto the chassis.
b. Fit the sun canopy to the round side of the frame.
c. Pull the sun canopy over the head end of the frame.
d Click the 2 canopy clamps onto the frame at the point
where there is no rubber.
e Roll the top of the clamp onto the aluminum frame and
then secure the bottom of the clamp.
f Attach the elastic bands to the front of the canopy
clamps.
g Pull out the sun canopy.
Important You can also use the sun canopy to protect your
child from wind
WARNINGS Babies have very sensitive skin. Never put a baby in the Bugaboo Cameleon in
the sunlight without ftting the sun canopy.
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
31/36
b
c
e
eng
2rain cover
The rain cover is pulled over the sun canopy or over the sun canopys rame. The black edge o the
rain cover is attached to the oot end o the rame.
step 1 fitting the rain cover over the tailored sun canopy
a. Fit the sun canopy to the rame and old it out.
b Lay the rain cover with the wide, black edge on the
oot end.
c Pull the rain cover over the sun canopy frst.
d. Ensure that the stitched seams o the rain cover are
aligned with the sun canopys rame.
e Slide the holes o the rain cover rame over the
protruding pins on the side o the rame
Finally, pull the wide, black edge over the oot end o
the rame.
Important Ensure that the stitched seams o the rain cover
are aligned with the sun canopys rame.
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
32/36
a
b
c
eng
step 2 fitting the rain cover over the tailored sun canopys frame
I you remove the abric rom the sun canopy and ft the rain cover over the rame, the child will have
a ull view o outside the stroller.
a Pull the sun canopy apart. Pull the rame out o the
canopy clamps and remove abric.
b Place the clamps on the rame. Insert the rame back
into the canopy clamps.
c Pull the rame apart.
d. Lay the rain cover with the wide, black edge on the
oot end.
e. Pull the rain cover over the sun canopys rame frst.
. Ensure that the stitched seams o the rain cover are
aligned with the sun canopys rame.
g. Slide the holes o the rain cover rame over the protruding
pins on the side o the rame.
h. Finally, pull the wide, black edge over the oot end o
the rame.
Important Ensure that the stitched seams o the rain cover
are aligned with the sun canopys rame.
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
33/36
b
eng
4using the air vent in the rain cover
There is an air vent at the ront o the rain cover to provide proper ventilation.
a. Press the windows touch asteners together properly. The space created between the window
and rain cover is the air opening.
WARNINGS To prevent the child from overheating, do not leave him/her under the rain cover
if it is not raining. Ensure proper ventilation by pressing the touch fasteners of the air vent together
properly.
mosquito netThe mosquito net keeps out insects.
step 1 fitting the mosquito net
a. Fit the sun canopy, with or without its abric, to the
bassinet or seat.
b With the washing instructions at the head end, pull the
mosquito net over the sun canopy.
c. Ensure there is a tight ft between the sides o the net
and the bassinet or seat.
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
34/36
c
eng
59. travelling and storage
You can easily store the Bugaboo Cameleon, or take it with you in the trunk oyour car.
step 1 collapsing the seat or bassinetRemove the seat or bassinet rom the chassis. Remove the carry handle. Set the handlebar to thelowest position.
collapsing the seat
a. Pull the seat pad rom the seat.
b. Fold the rame supports against the rame.
c. Press the seat fat between the rame.
collapsing the bassinet
d. Remove the 2 plastic llets rom pockets in the
bassinet abric.
e. Fold rame supports against the rame.
. Press the bassinet down fat between the rame.
step 2 folding the chassis and wheels
a. Put the Bugaboo Cameleon chassis in the 4-wheel
position.
b. Place the handlebar above the large wheels.
c Pull the two white release knobs towards you, and while
pulling the handlebar down, place it on the foor.
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
35/36
d
eng
6d Grasp the center shaft on which the frame bearers are
located and lift everything up.
The chassis with the wheels and handlebar should now
fall against each other.
e. The Bugaboo Cameleon can now be put in storage or
transported by car. You can also store the Bugaboo
Cameleon without its wheels, or hang the Bugaboo
Cameleon by the handlebar.
-
7/31/2019 User-guide 3 Bugaboo-cameleon Rv07 en Z50095na
36/36
30
eng
710. maintenance
safetyCheck the saety o the Bugaboo Cameleon beore each use. Ensure that the touch asteners, the
brake and the saety belts are all working properly, the carry handle is attached properly and that
the bassinet or seat is ftted correctly to the chassis. Check whether the Bugaboo Cameleon is
damaged. You should ensure that any damaged or worn parts are repaired immediately
(See WARNINGS section).
partsFor replacements, use only genuine Bugaboo parts, or parts that have been approved by Bugaboo
North America Inc. To prevent mold, do not old the Bugaboo Cameleon and accessories when wet
or store them in a damp place.
cleaningTo clean wheels, remove them rom their holders and clean with a moist cloth, lukewarm water
and a mild cleaning agent, then dry well and lubricate them with a silicone spray.
NEVER lubricate the wheel bearings.
Important Some Bugaboo Cameleon components may become discolored i let in the sun.
cleaning the fabricThe Bugaboo Cameleons abric is detachable and may be washed in a washing machine. Wash
careully. Beore washing, ALWAYS remove the rame, reinorcements and plastic oam parts.
Note When washing the abric, remind the ollowing:
- maximum temperature 0 C / 85 F (cold wash)
- do not use bleach
- do not tumble dry
- do not iron
- do not dry clean
The aerated inlay can be washed at 60C/40F (hot wash). At this temperature, the inlay will be-
come totally clean. The aerated inlay is placed on top o the thicker oam mattress and can be taken
o by removing the mattress cover. Ater washing the abrics, ensure that all parts are replaced in
their original positions. The aerated inlay should be placed on top o the oam mattress. Do not use
the mattress without the aerated inlay.