US -Series 380...WORKING RANGE The lift capacity values are stated in imperial pounds (lbs). The...

12
380 mhl 366 hp max. 154,322 lbs max. 72'2" US Material Handler | F-Series

Transcript of US -Series 380...WORKING RANGE The lift capacity values are stated in imperial pounds (lbs). The...

Page 1: US -Series 380...WORKING RANGE The lift capacity values are stated in imperial pounds (lbs). The pump pressure is 5,221 psi. In accordance with ISO 10567 the lift capacity values represents

380mhl

366 hp

max. 154,322 lbs

max. 72'2"

USMaterial Handler | F-Series

Page 2: US -Series 380...WORKING RANGE The lift capacity values are stated in imperial pounds (lbs). The pump pressure is 5,221 psi. In accordance with ISO 10567 the lift capacity values represents

02

TECHNICAL DATA

UNDERCARRIAGEFront axle Planetary drive axle with integrated drum brake,

rigidly mounted, max. steering angle: 30°

Rear axle Oscillating planetary drive rear axle with integrated drum brake and selectable oscillating axle lock

Stabilization 4-point stabilizers

Tires Solid rubber, elastic, 8-fold, with intermediate rings

BRAKE SYSTEMService brake Hydraulic single-circuit braking system acting on all

wheels

Parking brake Electrically operated disc brake on rear axle, acting on both front and rear axles via transfer gear

HYDRAULIC SYSTEMPump delivery rate max. 169 gpm + 53 gpm in the swing circuit

Operating pressure 4641 / 5221 psi

Hydraulic oil tank 182 gal

OPERATOR’S CABCab Infinitely variable hydraulic height-adjustment with eye

level up to 21' above ground.Sound-deadened, ample thermal panoramic glass windows, windshield with pulldown sunblind, viewing window on cab roof, sliding window in cab door, sliding door

Climate control Automatic air-conditioning. Infinitely variable heating with 8-speed fan, 10 adjustable air nozzles, including 4 in the roof lining, 3 defroster nozzles

Operator’s seat Air-cushioned comfort-seat with integrated headrest, safety belt and lumbar support, seat heating with integrated A/C function optional. Comfortable opera-tion with multi-purpose adjustment options for seat position, seat inclination, seat cushion placement in relation to armrests and pilot control units. Articulating armrests and joysticks

Monitoring Ergonomic layout, anti-glare instrumentation. Multi-function display, automatic monitoring and record-ing of abnormal operating conditions (including all hydraulic oil filters, hydraulic oil temperature (cold/hot), coolant temperature and charge air temperature, diesel particulate filter load, visual and audible warning indication with shutdown of pilot controls/engine power reduction. Diagnosis of individual sensors pos-sible via the multifunction display. Rear view camera and side view camera

Sound levels Sound power level (ambience) LWA 105.8 dB(A) (metered) acc. to directive 2000/14/EG LWA 106 dB(A) (guaranteed) acc. to directive 2000/14/EG Sound pressure level (inside the cabin) acc. to directive ISO 6396 LPA 71 dB(A)

Certified in accordance with CE regulations

OPERATING WEIGHT WITHOUT ATTACHMENTSMHL380 F 143,299 – 154,322 lbs

DIESEL ENGINEManufacturer and model Deutz TCD 12.0 V6 4V

Design 6-cylinder-V-engine

Control EMR III / EMR IV

Method of operation 4-cycle diesel, common rail direct injection, turbo-charged with inter cooler, controlled exhaust gas recirculation, diesel particulate filter with continuous regeneration and double SCR catalytic converter

Engine power 366 hp (273 kW)

Rated speed 1,800 rpm

Displacement 732 cui

Cooling system Water and charge air cooling with temperature controlled fan speed

Exhaust emission standard EPA Tier 4 final / EU stage IV

Fuel tank 217 gal Diesel

DEF / Urea tank 22.5 gal AdBlue

ELECTRICAL SYSTEMGenerator 28 V / 100 A

Operating Voltage 24 V

Battery 2 × 12 V / 170 Ah / 950 A

Lighting system 1 × LED spotlight on upper carriage 1 × LED spotlight on cabin floor turn signals and rear side marker lamps

Optional equipment 30 kW DC generator with controls and insulation monitoring

TRANSMISSIONHydrostatic travel drive via infinitely variable axial piston motor with directly mounted travel brake valves, flanged to a transfer box, 4-wheel drive

Travel speed 0–5 mph

Gradeability max. 11 %

Turning radius 32'6"

SWING DRIVESlew ring Internally toothed ball ring gear (double row)

Drive Two two-stage planetary gears with integrated multi-disc brake, closed circuit

Uppercarriage swing speed 0–6 rpm infinitely variable

Rotating interlock Electrically operated

mhl380 f

Page 3: US -Series 380...WORKING RANGE The lift capacity values are stated in imperial pounds (lbs). The pump pressure is 5,221 psi. In accordance with ISO 10567 the lift capacity values represents

03www.terex-fuchs.com

EQUIPMENT

DIESEL ENGINE Standard Option

Intercooler and coolant radiator

Direct electronic fuel injection / common rail

Advanced automatic idle incl. engine shut-off function

Engine preheating

Engine diagnostic interface

Temperature-dependent fan drive

UNDERCARRIAGEAll-wheel drive

Drum brakes

Rear axle oscillating lock

4-point stabilizers

4-point stabilizers, individually controllable

Stabilizer cylinders with integrated two-way check valves

Piston rod protection on stabilizer cylinders

Tool box

UPPERCARRIAGESeparate cooling systems for engine and hydraulic oil cooler

Cooling system with temperature-dependent fan drive

Reversing fan for coolant, charge air and hydraulic oil

Automatic central lubrication system

Rear view camera

Side view camera

Reversing alarm

Electric diesel refuelling pump

Lighting protection

Maintenance hood with mechanical locking device

Lockable cleaning access openings on radiators

Quick drain valve on Diesel tank

Quick drain valve on hydraulic oil tank

Quick drain valve on radiator

Quick drain valve on engine-oil pan

Special paint (customer paint work)

CAB Standard Option

Cab system vertically adjustable

Cab system vertically and horizontally adjustable

3-layer glass with protection film

Sliding window in cab door

Reinforced glass (windscreen and roof panel)

Washer system (windshield)

Roof washer system (skylight)

Air cushioned operator’s seat with head-rest, seatbelt and lumbar-support

Seat heating with integrated A/C function

Joystick steering

Steering column, height and tilt adjustable (instead of joystick steering)

Automatic air conditioning system

Independent heating system

Multi-function touch display

FOPS protective guard

Front / roof protective guard

Radio USB & Bluetooth (EU & USA)

12 V socket

Fire extinguisher, dry powder

Travel alarm w/ rotating beacon

OTHER EQUIPMENT30 kW DC generator with controls

Close proximity range limiter for dipper stick

Coolant and hydraulic oil level monitoring system

Overload warning system basic

Overload warning and reach limitation system

Filter system for attachments

Hose rupture safety valves for boom cylinders

Hose rupture safety valves for stick cylinders

Working light attached to cab floor

Working lights mounted to superstructure

Working light mounted on dipper stick (1×)

Quick-connect coupling on dipper stick

Load limit control

Hydraulic oil preheating

Lubrication of the grab suspension by central lubrication system

LED front headlights

LED light packages

360° bird view camera system

Floating switch

Fuchs Telematics System, incl. 2 years service

Further optional equipment available on request!

mhl380 f

Page 4: US -Series 380...WORKING RANGE The lift capacity values are stated in imperial pounds (lbs). The pump pressure is 5,221 psi. In accordance with ISO 10567 the lift capacity values represents

04

11'10"

22'3"

5.5"

13'6"

24.4

"

56"

10'4

" 12'

6'9

11'8"

11'9"

12'2"

17'

10'4"

10'8"

13.6

"

20.9

"

18'8"

C

B

6'9"

7'8"

A

5.5"

12'

TRANSPORT DIMENSIONSAll dimensions in ft & in

DIMENSIONS4-POINT STABILIZERS

WITH VERTICALLY AND HORIZONTALLY ADJUSTABLE CABAll dimensions in ft & in

Dimensions Reach 60'8" Reach 65'7" Reach 68'11" Reach 68'11" cranked Reach 72'2" Reach 72'2" cranked

A 51' 56'9" 56'9" 56'5" 56'9" 17310 mm

B 20'11" 26'1" 23'8" 21'7" 20'3" 6210 mm

C 11'1" 9'8" 12'2" 12'6" 11'9" 4700 mm

Average center of gravity in transport position

mhl380 f

Page 5: US -Series 380...WORKING RANGE The lift capacity values are stated in imperial pounds (lbs). The pump pressure is 5,221 psi. In accordance with ISO 10567 the lift capacity values represents

380mhl

66 63 60 56 53 50 46 43 40 36 33 30 26 23 20 16 13 10 7 3 070

63

60

56

53

50

46

43

40

36

33

30

26

23

20

13

10

7

3

-30

-26

-23

-20

-16

-13

-10

-7

-3

0

66

16

-33

05www.terex-fuchs.com

WORKING RANGE

The lift capacity values are stated in imperial pounds (lbs). The pump pressure is 5,221 psi. In accordance with ISO 10567 the lift capacity values represents 75% of the static tipping loads or 87% of the hydraulic lifting force (marked °). On solid and level ground the values apply to a swing range of 360°. The (…) values apply in the longitudinal direction of the undercarriage. The values for “not supported” only apply via the steering axle or the locked oscillating axle. The weights of the attached load hoisting equipment (grab, load hock, etc.) must be deducted from the lift capacity values. The working load of the lifting devise must be observed. In accordance with the EN 474-5 for object handling application hose rupture valves on the boom and stick cylinders, an overload warning device and the lift capacity table in the cab are required. For object handling application the machine has to be supported on a level ground.

REACH 60'8" WITH DIPPER STICKLoading equipment Boom 31.5'

Dipper stick 26.2'Multi-tine grapple

RECOMMENDED ATTACHMENTSLift hooks 44,100 lbs

Multi-tine grapple 1.05 yd3 Open or half-closed shells

Multi-tine grapple 1.31 yd3 Open or half-closed shells

Multi-tine grapple 1.57 yd3 Open or half-closed shells

Multi-tine grapple 1.83 yd3 Open or half-closed shells

Clamshell grab 1.83 yd3 Loose goods density up to 125 lbs/ft3

Clamshell grab 2.09 yd3 Loose goods density up to 106 lbs/ft3

Rot

atio

n ce

nter

Reach in ft

LIFTING CAPACITYReach

[ft]Undercarriage

outriggerReach [ft]

15 20 25 30 35 40 45 50 55 60

60 4-point supported 20,600° (20,600°)

55 4-point supported 22,200° (22,200°)

50 4-point supported 26,800° (26,800°) 22,200° (22,200°)

45 4-point supported 26,200° (26,200°) 24,600° (24,600°) 21,200° (21,200°)

40 4-point supported 26,100° (26,100°) 24,400° (24,400°) 23,000° (23,000°) 19,000° (19,000°)

35 4-point supported 26,600° (26,600°) 24,700° (24,700°) 23,100° (23,100°) 14,400° (14,400°) 14,300° (14,300°)

30 4-point supported 27,500° (27,500°) 25,300° (25,300°) 23,500° (23,500°) 21,900 (21,900°) 18,900 (19,300°)

25 4-point supported 32,300° (32,300°) 29,000° (29,000°) 26,300° (26,300°) 24,100° (24,100°) 22,000 (22,200°) 18,800 (20,500°)

20 4-point supported 41,100° (41,100°) 35,100° (35,100°) 30,700° (30,700°) 27,400° (27,400°) 24,800° (24,800°) 21,700 (22,600°) 18,600 (20,700°) 14,500° (14,500°)

15 4-point supported 60,000° (60,000°) 46,300° (46,300°) 38,100° (38,100°) 32,600° (32,600°) 28,600° (28,600°) 25,000 (25,500°) 21,300 (23,000°) 18,400 (20,900°) 16,000 (16,800°)

10 4-point supported 69,000° (69,000°) 51,100° (51,100°) 40,900° (40,900°) 34,300° (34,300°) 29,100 (29,700°) 24,400 (26,200°) 20,900 (23,300°) 18,100 (20,900°) 15,900 (18,100°)

5 4-point supported 32,100° (32,100°) 54,300° (54,300°) 42,800 (43,000°) 34,200 (35,600°) 28,300 (30,500°) 23,900 (26,600°) 20,500 (23,400°) 17,900 (20,700°) 15,800 (17,900°)

0 4-point supported 25,000° (25,000°) 54,200 (54,300°) 41,400 (43,800°) 33,200 (36,200°) 27,600 (30,700°) 23,400 (26,600°) 20,200 (23,200°) 17,700 (20,200°) 15,700 (16,600°)

-5 4-point supported 24,800° (24,800°) 43,700° (43,700°) 40,500 (43,200°) 32,500 (35,800°) 27,100 (30,300°) 23,000 (26,000°) 20,000 (22,500°) 17,600 (19,200°)

-10 4-point supported 26,500° (26,500°) 41,400° (41,400°) 40,000 (41,200°) 32,100 (34,300°) 26,800 (29,100°) 22,800 (24,800°) 19,800 (21,100°) 17,300° (17,300°)

-15 4-point supported 42,000° (42,000°) 37,600° (37,600°) 31,600° (31,600°) 26,600 (26,800°) 22,600° (22,600°) 18,700° (18,700°)

Reach max. 60.5'

9.8 4-point supported 13,300° (13,300°)

mhl380 f

Page 6: US -Series 380...WORKING RANGE The lift capacity values are stated in imperial pounds (lbs). The pump pressure is 5,221 psi. In accordance with ISO 10567 the lift capacity values represents

380mhl

20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 021

19

18

17

16

15

14

13

12

11

10

9

8

7

6

4

3

2

1

-9

-8

-7

-6

-5

-4

-3

-2

-1

0

20

5

-102223

21

22

06

WORKING RANGEREACH 65'7" WITH DIPPER STICKLoading equipment Boom 37.2'

Dipper stick 26.2'Multi-tine grapple

RECOMMENDED ATTACHMENTSLift hooks 44,100 lbs

Multi-tine grapple 1.05 yd3 Open or half-closed shells

Multi-tine grapple 1.31 yd3 Open or half-closed shells

Multi-tine grapple 1.57 yd3 Open or half-closed shells

Multi-tine grapple 1.83 yd3 Open or half-closed shells

Clamshell grab 1.83 yd3 Loose goods density up to 125 lbs/ft3

Clamshell grab 2.09 yd3 Loose goods density up to 106 lbs/ft3

Clamshell grab 2.62 yd3 Loose goods density up to 75 lbs/ft3

Clamshell grab > 2.62 yd3 on demand

Rot

atio

n ce

nter

Reach in ft

The lift capacity values are stated in imperial pounds (lbs). The pump pressure is 5,221 psi. In accordance with ISO 10567 the lift capacity values represents 75% of the static tipping loads or 87% of the hydraulic lifting force (marked °). On solid and level ground the values apply to a swing range of 360°. The (…) values apply in the longitudinal direction of the undercarriage. The values for “not supported” only apply via the steering axle or the locked oscillating axle. The weights of the attached load hoisting equipment (grab, load hock, etc.) must be deducted from the lift capacity values. The working load of the lifting devise must be observed. In accordance with the EN 474-5 for object handling application hose rupture valves on the boom and stick cylinders, an overload warning device and the lift capacity table in the cab are required. For object handling application the machine has to be supported on a level ground.

LIFTING CAPACITYReach

[ft]Undercarriage

outriggerReach [ft]

20 25 30 35 40 45 50 55 60 65

65 4-point supported 23,100° (23,100°)

60 4-point supported 24,300° (24,300°) 19,000° (19,000°)

55 4-point supported 26,000° (26,000°) 23,800° (23,800°) 19,200° (19,200°)

50 4-point supported 25,600° (25,600°) 23,400° (23,400°) 21,600° (21,600°) 18,300° (18,300°)

45 4-point supported 25,600° (25,600°) 23,300° (23,300°) 21,500° (21,500°) 20,100° (20,100°) 16,100° (16,100°)

40 4-point supported 26,000° (26,000°) 23,600° (23,600°) 21,600° (21,600°) 20,000° (20,000°) 18,100 (18,100°)

35 4-point supported 26,800° (26,800°) 24,100° (24,100°) 21,900° (21,900°) 20,200° (20,200°) 18,000 (18,600°) 15,200 (17,200°)

30 4-point supported 31,830° (31,830°) 27,800° (27,800°) 24,800° (24,800°) 22,400° (22,400°) 20,400° (20,400°) 17,800 (18,800°) 15,200 (17,200°)

25 4-point supported 40,676° (40,676°) 33,900° (33,900°) 29,200° (29,200°) 25,700° (25,700°) 23,000° (23,000°) 20,500 (20,800°) 17,500 (19,000°) 15,000 (17,400°) 13,000 (13,700°)

20 4-point supported 58,700° (58,700°) 44,600° (44,600°) 36,200° (36,200°) 30,600° (30,600°) 26,600° (26,600°) 23,500 (23,600°) 19,965 (21,200°) 17,100 (19,200°) 14,900 (17,400°) 13,000 (15,700°)

15 4-point supported 34,400° (34,400°) 48,300° (48,300°) 38,400° (38,400°) 32,000° (32,000°) 27,200 (27,500°) 22,800 (24,100°) 19,400 (21,500°) 16,800 (19,300°) 14,600 (17,400°) 12,800 (15,400°)

10 4-point supported 12,600° (12,600°) 42,600° (42,600°) 39,400 (40,000°) 31,600 (33,000°) 26,100 (28,100°) 22,000 (24,500°) 18,900 (21,700°) 16,400 (19,300°) 14,400 (17,300°) 12,600 (15,200°)

5 4-point supported 10,700° (10,700°) 26,300° (26,300°) 37,500 (40,600°) 30,300 (33,500°) 25,200 (28,400°) 21,400 (24,600°) 18,400 (21,700°) 16,100 (19,200°) 14,100 (17,000°) 12,600 (14,800°)

0 4-point supported 12,300° (12,300°) 23,100° (23,100°) 36,200 (40,000°) 29,300 (33,200°) 24,400 (28,200°) 20,800 (24,400°) 18,000 (21,400°) 15,800 (18,788°) 13,900 (16,500°) 12,600 (13,900°)

-5 4-point supported 15,000° (15,000°) 23,400° (23,400°) 35,500 (38,300°) 28,600 (32,200°) 23,900 (27,500°) 20,400 (23,800°) 17,700 (20,700°) 15,600 (18,100°) 13,900 (15,700°) 12,300 (12,600°)

-10 4-point supported 25,000° (25,000°) 35,200 (35,600°) 28,300 (30,300°) 23,600 (26,100°) 20,200 (22,600°) 17,500 (19,600°) 15,400 (16,900°) 13,900 (14,100°)

-15 4-point supported 31,900° (31,900°) 27,600° (27,600°) 23,500 (24,000°) 20,100 (20,700°) 17,500 (17,900°) 15,200° (15,200°)

-20 4-point supported 20,900° (20,900°) 18,100° (18,100°)

mhl380 f

Page 7: US -Series 380...WORKING RANGE The lift capacity values are stated in imperial pounds (lbs). The pump pressure is 5,221 psi. In accordance with ISO 10567 the lift capacity values represents

380mhl

66 63 60 56 53 50 46 43 40 36 33 30 26 23 20 16 13 10 7 3 0707376

63

60

56

53

50

46

43

40

36

33

30

26

23

20

13

10

7

3

-30

-26

-23

-20

-16

-13

-10

-7

-3

0

66

70

73

76

16

-33

-36

07www.terex-fuchs.com

WORKING RANGE

The lift capacity values are stated in imperial pounds (lbs). The pump pressure is 5,221 psi. In accordance with ISO 10567 the lift capacity values represents 75% of the static tipping loads or 87% of the hydraulic lifting force (marked °). On solid and level ground the values apply to a swing range of 360°. The (…) values apply in the longitudinal direction of the undercarriage. The values for “not supported” only apply via the steering axle or the locked oscillating axle. The weights of the attached load hoisting equipment (grab, load hock, etc.) must be deducted from the lift capacity values. The working load of the lifting devise must be observed. In accordance with the EN 474-5 for object handling application hose rupture valves on the boom and stick cylinders, an overload warning device and the lift capacity table in the cab are required. For object handling application the machine has to be supported on a level ground.

REACH 68'11" WITH DIPPER STICKLoading equipment Boom 37.2'

Dipper stick 29.4'Multi-tine grapple

RECOMMENDED ATTACHMENTSLift hooks 44,100 lbs

Multi-tine grapple 1.05 yd3 Open or half-closed shells

Multi-tine grapple 1.31 yd3 Open or half-closed shells

Multi-tine grapple 1.57 yd3 Open or half-closed shells

Multi-tine grapple 1.83 yd3 Open or half-closed shells

Clamshell grab 1.83 yd3 Loose goods density up to 125 lbs/ft3

Clamshell grab 2.09 yd3 Loose goods density up to 106 lbs/ft3

Clamshell grab 2.62 yd3 Loose goods density up to 75 lbs/ft3

Clamshell grab > 2.62 yd3 on demand

Rot

atio

n ce

nter

Reach in ft

LIFTING CAPACITYReach

[ft]Undercarriage

outriggerReach [ft]

15 20 25 30 35 40 45 50 55 60 65 70

70 4-point supported 18,100° (18,100°)

65 4-point supported 20,100° (20,100°)

60 4-point supported 23,800° (23,800°)20,500° (20,500°) 15,700° (15,700°)

55 4-point supported 22,300° (22,300°)20,500° (20,500°) 15,400° (15,400°)

50 4-point supported 21,900° (21,900°) 20,300° (20,300°) 19,000° (19,000°) 13,900° (13,900°)

45 4-point supported 21,900° (21,900°) 20,300° (20,300°) 19,000° (19,000°) 17,900° (17,900°)

40 4-point supported 22,200° (22,200°)20,500° (20,500°) 19,000° (19,000°) 17,900° (17,900°) 15,700 (15,900°)

35 4-point supported 25,000° (25,000°) 22,700° (22,700°) 20,800° (20,800°) 19,200° (19,200°) 17,900° (17,900°) 15,700 (16,633°) 11,100° (11,100°)

30 4-point supported 26,200° (26,200°)23,500° (23,500°) 21,400° (21,400°) 19,600° (19,600°) 18,000 (18,100°) 15,400 (16,800°) 13,200 (14,800°)

25 4-point supported 31,700° (31,700°) 27,600° (27,600°) 24,500° (24,500°) 22,000° (22,000°)20,000° (20,000°) 17,700 (18,300°) 15,200 (16,800°) 13,200 (15,400°)

20 4-point supported 52,470° (52,470°) 41,400° (41,400°) 34,200° (34,200°)29,200° (29,200°)25,500° (25,500°) 22,700° (22,700°) 20,231 (20,500°) 17,300 (18,600°) 15,000 (17,000°) 13,000 (15,400°)

15 4-point supported 61,300° (61,300°) 45,700° (45,700°) 36,700° (36,700°) 30,800° (30,800°)26,600° (26,600°) 23,200 (23,400°) 19,700 (20,900°) 16,900 (18,800°) 14,700 (17,100°) 12,800 (15,400°)

10 4-point supported 23,900° (23,900°) 49,200° (49,200°)38,800° (38,800°) 32,100° (32,100°) 26,600 (27,400°) 22,400 (24,000°) 19,100 (21,200°) 16,500 (19,000°) 14,400 (17,100°) 12,600 (15,200°) 11,200 (11,700°)

5 4-point supported 14,400° (14,400°) 35,800° (35,800°) 38,500 (40,100°) 30,900 (33,000°) 25,600 (28,000°) 21,600 (24,300°) 18,500 (21,400°) 16,100 (19,000°) 14,100 (17,000°) 12,600 (15,000°)

0 4-point supported 7,100° (7,100°) 13,700° (13,700°) 26,400° (26,400°) 36,900 (40,300°) 29,700 (33,300°) 24,700 (28,200°) 21,000 (24,300°) 18,100 (21,300°) 15,800 (18,827°) 13,900 (16,600°) 12,300 (14,600°)

-5 4-point supported 15,100° (15,100°) 24,400° (24,400°) 35,800 (39,400°) 28,900 (32,800°) 24,100 (27,800°) 20,500 (24,000°) 17,700 (20,900°) 15,500 (18,400°) 13,700 (16,100°) 12,300 (13,700°)

-10 4-point supported 17,100° (17,100°) 24,700° (24,700°) 35,300 (37,500°) 28,400 (31,500°) 23,600 (26,800°) 20,100 (23,200°) 17,400 (20,100°) 15,300 (17,500°) 13,700 (15,000°) 12,100 (12,300°)

-15 4-point supported 26,100° (26,100°) 34,500° (34,500°) 28,100 (29,300°) 23,400 (25,200°) 19,900 (21,800°) 17,300 (18,800°) 15,200 (16,100°) 13,400° (13,400°)

-20 4-point supported 30,400° (30,400°)26,500° (26,500°) 22,700° (22,700°) 19,600° (19,600°) 17,000° (17,000°) 14,100° (14,100°)

mhl380 f

Page 8: US -Series 380...WORKING RANGE The lift capacity values are stated in imperial pounds (lbs). The pump pressure is 5,221 psi. In accordance with ISO 10567 the lift capacity values represents

380mhl

66 63 60 56 53 50 46 43 40 36 33 30 26 23 20 16 13 10 7 3 0707376

63

60

56

53

50

46

43

40

36

33

30

26

23

20

13

10

7

3

-30

-26

-23

-20

-16

-13

-10

-7

-3

0

66

70

16

-33

-36

-40

-43

08

WORKING RANGEREACH 68'11" CRANKED BOOMLoading equipment Cranked Boom 37.2'

Dipper stick 29.4'Multi-tine grapple

RECOMMENDED ATTACHMENTSLift hooks 44,100 lbs

Multi-tine grapple 1.05 yd3 Open or half-closed shells

Multi-tine grapple 1.31 yd3 Open or half-closed shells

Multi-tine grapple 1.57 yd3 Open or half-closed shells

Multi-tine grapple 1.83 yd3 Open or half-closed shells

Clamshell grab 1.83 yd3 Loose goods density up to 125 lbs/ft3

Clamshell grab 2.09 yd3 Loose goods density up to 106 lbs/ft3

Clamshell grab 2.62 yd3 Loose goods density up to 75 lbs/ft3

Clamshell grab > 2.62 yd3 on demand

Rot

atio

n ce

nter

Reach in ft

The lift capacity values are stated in imperial pounds (lbs). The pump pressure is 5,221 psi. In accordance with ISO 10567 the lift capacity values represents 75% of the static tipping loads or 87% of the hydraulic lifting force (marked °). On solid and level ground the values apply to a swing range of 360°. The (…) values apply in the longitudinal direction of the undercarriage. The values for “not supported” only apply via the steering axle or the locked oscillating axle. The weights of the attached load hoisting equipment (grab, load hock, etc.) must be deducted from the lift capacity values. The working load of the lifting devise must be observed. In accordance with the EN 474-5 for object handling application hose rupture valves on the boom and stick cylinders, an overload warning device and the lift capacity table in the cab are required. For object handling application the machine has to be supported on a level ground.

LIFTING CAPACITYReach

[ft]Undercarriage

outrigger 15

Reach [ft]

20 25 30 35 40 45 50 55 60 65

60 4-point supported 18,300° (18,300°) 13,200° (13,200°)

55 4-point supported 17,200° (17,200°) 13,000° (13,000°)

50 4-point supported 17,000° (17,000°) 16,300° (16,300°) 11,700° (11,700°)

45 4-point supported 16,900° (16,900°) 16,100° (16,100°) 15,400° (15,400°)

40 4-point supported 17,100° (17,100°) 16,200° (16,200°) 15,400° (15,400°) 13,700° (13,700°)

35 4-point supported 17,500° (17,500°) 16,500° (16,500°) 15,600° (15,600°) 14,800° (14,800°)

30 4-point supported 19,600° (19,600°) 18,100° (18,100°) 16,900° (16,900°) 15,900° (15,900°) 15,000° (15,000°) 12,800° (12,800°)

25 4-point supported 23,000° (23,000°) 20,700° (20,700°) 18,900° (18,900°) 17,500° (17,500°) 16,200° (16,200°) 15,200 (15,000°) 13,000 (14,300°)

20 4-point supported 28,800° (28,800°) 24,900° (24,900°) 22,000° (22,000°) 19,800° (19,800°) 18,086° (18,100°) 16,700° (16,700°) 14,900 (15,500°) 13,000 (14,600°)

15 4-point supported 52,800° (52,800°) 39,400° (39,400°) 31,800° (31,800°) 26,800° (26,800°) 23,300° (23,300°) 20,800° (20,800°) 18,700° (18,700°) 16,800 (17,100°) 14,600 (15,800°) 12,800 (14,600°)

10 4-point supported 28,800° (28,800°) 44,000° (44,000°) 34,600° (34,600°) 28,700° (28,700°) 24,600° (24,600°) 21,700° (21,700°) 18,900 (19,400°) 16,400 (17,600°) 14,200 (16,000°) 12,600 (14,800°)

5 4-point supported 17,200° (17,200°) 39,800° (39,800°) 36,900° (36,900°) 30,300° (30,300°) 25,400 (25,700°) 21,400 (22,400°) 18,400 (19,900°) 15,900 (17,900°) 14,000 (16,200°) 12,300 (14,800°)

0 4-point supported 9,100° (9,100°) 15,800° (15,800°) 28,900° (28,900°) 36,600 (38,300°) 29,500 (31,300°) 24,500 (26,500°) 20,800 (23,000°) 17,900 (20,300°) 15,600 (18,119°) 13,700 (16,300°) 12,100 (14,600°)

-5 4-point supported 11,600° (11,600°) 16,700° (16,700°) 26,200° (26,200°) 35,500 (38,700°) 28,600 (31,800°) 23,800 (26,900°) 20,300 (23,300°) 17,500 (20,400°) 15,300 (18,100°) 13,400 (16,100°) 12,100 (14,300°)

-10 4-point supported 14,100° (14,100°) 18,400° (18,400°) 26,000° (26,000°) 34,900 (38,200°) 28,100 (31,600°) 23,300 (26,800°) 19,900 (23,200°) 17,200 (20,300°) 15,100 (17,900°) 13,400 (15,700°) 12,100 (13,700°)

-15 4-point supported 20,100° (20,100°) 26,800° (26,800°) 34,700 (36,800°) 27,800 (30,800°) 23,100 (26,200°) 19,600 (22,700°) 17,000 (19,800°) 15,000 (17,200°) 13,400 (15,000°)

-20 4-point supported 28200° (28200°) 34,600° (34,600°) 27,800 (29,100°) 23,100 (24,900°) 19,600 (21,600°) 17,000 (18,700°) 15,000 (16,100°) 13,400 (13,400°)

-25 4-point supported 31,300° (31,300°) 26,700° (26,700°) 22,900° (22,900°) 19,800 (19,800°) 17,000° (17,000°) 14,300° (14,300°)

mhl380 f

Page 9: US -Series 380...WORKING RANGE The lift capacity values are stated in imperial pounds (lbs). The pump pressure is 5,221 psi. In accordance with ISO 10567 the lift capacity values represents

380mhl

66 63 60 56 53 50 46 43 40 36 33 30 26 23 20 16 13 10 7 3 070737680

63

60

56

53

50

46

43

40

36

33

30

26

23

20

13

10

7

3

-30

-26

-23

-20

-16

-13

-10

-7

-3

0

66

70

73

76

16

-33

-36

09www.terex-fuchs.com

WORKING RANGE

The lift capacity values are stated in imperial pounds (lbs). The pump pressure is 5,221 psi. In accordance with ISO 10567 the lift capacity values represents 75% of the static tipping loads or 87% of the hydraulic lifting force (marked °). On solid and level ground the values apply to a swing range of 360°. The (…) values apply in the longitudinal direction of the undercarriage. The values for “not supported” only apply via the steering axle or the locked oscillating axle. The weights of the attached load hoisting equipment (grab, load hock, etc.) must be deducted from the lift capacity values. The working load of the lifting devise must be observed. In accordance with the EN 474-5 for object handling application hose rupture valves on the boom and stick cylinders, an overload warning device and the lift capacity table in the cab are required. For object handling application the machine has to be supported on a level ground.

REACH 72'2" WITH DIPPER STICKLoading equipment Boom 37.2'

Dipper stick 32.5'Multi-tine grapple

RECOMMENDED ATTACHMENTSLift hooks 44,100 lbs

Multi-tine grapple 1.05 yd3 Open or half-closed shells

Multi-tine grapple 1.31 yd3 Open or half-closed shells

Multi-tine grapple 1.57 yd3 Open or half-closed shells

Multi-tine grapple 1.83 yd3 Open or half-closed shells

Clamshell grab 1.83 yd3 Loose goods density up to 125 lbs/ft3

Clamshell grab 2.09 yd3 Loose goods density up to 106 lbs/ft3

Clamshell grab 2.62 yd3 Loose goods density up to 75 lbs/ft3

Clamshell grab > 2.62 yd3 on demand

Rot

atio

n ce

nter

Reach in ft

LIFTING CAPACITYReach

[ft]Undercarriage

outrigger 15

Reach [ft]

20 25 30 35 40 45 50 55 60 65 70

70 4-point supported 16,100° (16,100°)

65 4-point supported 17,200° (17,200°)

60 4-point supported 20,700° (20,700°) 17,400° (17,400°) 12,600° (12,600°)

55 4-point supported 21,400° (21,400°) 19,800° (19,800°) 17,200° (17,200°) 11,900° (11,900°)

50 4-point supported 21,200° (21,200°) 19,600° (19,600°) 18,500° (18,500°) 16,100° (16,100°)

45 4-point supported 21,200° (21,200°) 19,600° (19,600°) 18,300° (18,300°) 17,200° (17,200°) 14,500° (14,500°)

40 4-point supported 21,500° (21,500°) 19,800° (19,800°) 18,500° (18,500°) 17,200° (17,200°) 16,100 (16,100°) 11,200° (11,200°)

35 4-point supported 22,000° (22,000°)20,200° (20,200°) 18,700° (18,700°) 17,400° (17,400°) 16,100 (16,300°) 13,700 (14,600°)

30 4-point supported 25,100° (25,100°) 22,700° (22,700°) 20,700° (20,700°) 19,100° (19,100°) 17,600° (17,600°) 15,900 (16,300°) 13,700 (15,200°)

25 4-point supported 26,400° (26,400°) 23,600° (23,600°) 21,300° (21,300°) 19,500° (19,500°) 17,900° (17,900°) 15,700(16,500°) 13,400 (15,200°) 11,700 (12,100°)

20 4-point supported 38,600° (38,600°)32,400° (32,400°) 27,900° (27,900°) 24,600° (24,600°) 22,000° (22,000°) 19,926° (19,900°) 17,700 (18,200°) 15,300 (16,700°) 13,200 (15,200°) 11,700 (13,900°)

15 4-point supported 81,900° (81,900°) 55,900° (55,900°)42,800° (42,800°) 34,800° (34,800°)29,500° (29,500°)25,600° (25,600°) 22,700° (22,700°) 20,100 (20,400°) 17,200 (18,400°) 14,900 (16,800°) 13,000 (15,200°) 11,500 (13,900°)

10 4-point supported 62,800° (62,800°)46,500° (46,500°) 37,800° (37,800°) 30,900° (30,900°)26,500° (26,500°) 22,800 (23,300°) 19,400 (20,700°) 16,700 (18,600°) 14,600 (16,900°) 12,800 (15,200°) 11,200 (13,700°)

5 4-point supported 9,000° (9,000°) 23,100° (23,100°) 48,900° (48,900°)38,600° (38,600°) 31,400 (31,900°) 25,900 (27,200°) 21,800 (23,700°) 18,700 (21,000°) 16,200 (18,700°) 14,200 (16,800°) 12,600 (15,000°) 11,200 (13,400°)

0 4-point supported 9,600° (9,600°) 17,700° (17,700°) 34,600° (34,600°) 37,000 (39,300°) 29,900 (32,400°) 24,800 (27,500°) 21,000 (23,900°) 18,100 (21,000°) 15,800 (18,651°) 13,900 (16,600°) 12,300 (14,800°) 11,000 (12,800°)

-5 4-point supported 11,400° (11,400°) 17,200° (17,200°) 28,300° (28,300°) 35,500 (38,900°) 28,700 (32,200°) 23,900 (27,400°) 20,400 (23,700°) 17,600 (20,800°) 15,400 (18,300°) 13,700 (16,300°) 12,100 (14,100°) 11,000 (11,900°)

-10 4-point supported 13,400° (13,400°) 18,200° (18,200°) 26,600° (26,600°) 34,500 (37,600°) 27,900 (31,400°) 23,300 (26,700°) 19,900 (23,100°) 17,200 (20,200°) 15,100 (17,700°) 13,400 (15,400°) 12,100 (13,200°)

-15 4-point supported 19,600° (19,600°) 26,800° (26,800°) 34,000 (35,200°) 27,400 (29,700°) 22,900 (25,500°) 19,500 (22,000°) 17,000 (19,200°) 15,000 (16,800°) 13,200 (14,300°) 11,900° (11,900°)

-20 4-point supported 27,800° (27,800°) 32,000° (32,000°) 27,300 (27,300°) 22,700 (23,600°) 19,400 (20,300°) 16,800 (17,600°) 15,000 (15,200°) 12,800° (12,800°)

-25 4-point supported 24,000° (24,000°) 20,700° (20,700°) 18,100° (18,100°) 15,400° (15,400°)

mhl380 f

Page 10: US -Series 380...WORKING RANGE The lift capacity values are stated in imperial pounds (lbs). The pump pressure is 5,221 psi. In accordance with ISO 10567 the lift capacity values represents

380mhl

66 63 60 56 53 50 46 43 40 36 33 30 26 23 20 16 13 10 7 3 070737680

63

60

56

53

50

46

43

40

36

33

30

26

23

20

13

10

7

3

-30

-26

-23

-20

-16

-13

-10

-7

-3

0

66

70

16

-33

-36

-40

-43

-46

10

WORKING RANGE

Rot

atio

n ce

nter

Reach in ft

The lift capacity values are stated in imperial pounds (lbs). The pump pressure is 5,221 psi. In accordance with ISO 10567 the lift capacity values represents 75% of the static tipping loads or 87% of the hydraulic lifting force (marked °). On solid and level ground the values apply to a swing range of 360°. The (…) values apply in the longitudinal direction of the undercarriage. The values for “not supported” only apply via the steering axle or the locked oscillating axle. The weights of the attached load hoisting equipment (grab, load hock, etc.) must be deducted from the lift capacity values. The working load of the lifting devise must be observed. In accordance with the EN 474-5 for object handling application hose rupture valves on the boom and stick cylinders, an overload warning device and the lift capacity table in the cab are required. For object handling application the machine has to be supported on a level ground.

LIFTING CAPACITYReach

[ft]Undercarriage

outriggerReach [ft]

10 15 20 25 30 35 40 45 50 55 60 65 70

60 4-point supported 15,700° (15,700°)

55 4-point supported 16,500° (16,500°) 15,200° (15,200°)

50 4-point supported 15,700° (15,700°) 14,300° (14,300°)

45 4-point supported 15,700° (15,700°) 15,000° (15,000°) 12,600° (12,600°)

40 4-point supported 15,700° (15,700°) 15,000° (15,000°) 14,300° (14,300°)

35 4-point supported 16,900° (16,900°) 16,000° (16,000°) 15,200° (15,200°) 14,600° (14,600°) 12,800° (12,800°)

30 4-point supported 17,500° (17,500°) 16,400° (16,400°) 15,400° (15,400°) 14,600° (14,600°) 13,700 (13,900°)

25 4-point supported 19,800° (19,800°) 18,300° (18,300°) 16,900° (16,900°) 15,800° (15,800°) 14,800° (14,800°) 13,400 (14,100°) 10,100° (10,100°)

20 4-point supported 23,600° (23,600°) 21,100° (21,100°) 19,100° (19,100°) 17,563° (17,600°) 16,300° (16,300°) 15,200° (15,200°) 13,200 (14,300°) 11,700 (11,900°)

15 4-point supported 36,100° (36,100°) 29,800° (29,800°) 25,500° (25,500°) 22,400° (22,400°) 20,100° (20,100°) 18,200° (18,200°) 16,700° (16,700°) 15,000 (15,500°) 13,000 (14,300°) 11,500 (13,400°)

10 4-point supported 21,200° (21,200°) 55,300° (55,300°) 40,800° (40,800°) 32,600° (32,600°) 27,400° (27,400°) 23,700° (23,700°) 21,000° (21,000°) 18,900° (18,900°) 16,800 (17,200°) 14,600 (15,800°) 12,800 (14,600°) 11,200(13,400°)

5 4-point supported 11,500° (11,500°) 26,700° (26,700°) 44,600° (44,600°) 35,100° (35,100°) 29,000° (29,000°) 24,900° (24,900°) 21,800° (21,800°) 18,800 (19,500°) 16,300 (17,600°) 14,200 (16,000°) 12,600 (14,800°) 11,200 (13,400°)

0 4-point supported 7,700° (7,700°) 11,500° (11,500°) 20,000° (20,000°) 37,600° (37,600°) 36,800° (36,800°) 29,900 (30,300°) 24,800 (25,800°) 21,100 (22,400°) 18,100 (19,900°) 15,800 (17,882°) 13,900 (16,200°) 12,300 (14,800°) 11,000 (13,200°)

-5 4-point supported 10,100° (10,100°) 13,000° (13,000°) 18,900° (18,900°) 30,200° (30,200°) 35,500 (37,700°) 28,700 (31,000°) 23,900 (26,300°) 20,400 (22,900°) 17,600 (20,200°) 15,400 (18,000°) 13,700 (16,100°) 12,100 (14,600°) 11,000(12,300°)

-10 4-point supported 14,800° (14,800°) 19,500° (19,500°) 27,900° (27,900°) 34,500 (37,700°) 27,900 (31,200°) 23,300 (26,500°) 19,900 (23,000°) 17,200 (20,200°) 15,100 (17,900°) 13,400 (16,100°) 12,100 (14,200°)

-15 4-point supported 16,300° (16,300°) 20,500° (20,500°) 27,600° (27,600°) 34,000 (36,900°) 27,400 (30,700°) 22,900 (26,200°) 19,500 (22,700°) 17,000 (19,900°) 15,000 (17,600°) 13,200 (15,400°) 12,100 (13,400°)

-20 4-point supported 21,800° (21,800°) 28,000° (28,000°) 34,000 (35,300°) 27,100 (29,500°) 22,700 (25,310°) 19,400 (21,800°) 16,800 (19,200°) 15,000 (16,800°) 13,200 (14,600°)

-25 4-point supported 29,100° (29,100°) 32,600° (32,600°) 27,300 (27,800°) 22,700 (23,800°) 19,400 (20,700°) 17,000 (17,900°) 15,000 (15,400°) 13,000° (13,000°)

-30 4-point supported 29,100° (29,100°) 24,900° (24,900°) 21,600° (21,600°) 18,500° (18,500°) 15,900° (15,900°)

REACH 72'2" CRANKED BOOMLoading equipment Boom 37.2'

Dipper stick 32.5'Multi-tine grapple

RECOMMENDED ATTACHMENTSLift hooks 44,100 lbs

Multi-tine grapple 1.05 yd3 Open or half-closed shells

Multi-tine grapple 1.31 yd3 Open or half-closed shells

Multi-tine grapple 1.57 yd3 Open or half-closed shells

Multi-tine grapple 1.83 yd3 Open or half-closed shells

Clamshell grab 1.83 yd3 Loose goods density up to 125 lbs/ft3

Clamshell grab 2.09 yd3 Loose goods density up to 106 lbs/ft3

Clamshell grab 2.62 yd3 Loose goods density up to 75 lbs/ft3

Clamshell grab > 2.62 yd3 on demand

mhl380 f

Page 11: US -Series 380...WORKING RANGE The lift capacity values are stated in imperial pounds (lbs). The pump pressure is 5,221 psi. In accordance with ISO 10567 the lift capacity values represents

11

mhl380 f

Page 12: US -Series 380...WORKING RANGE The lift capacity values are stated in imperial pounds (lbs). The pump pressure is 5,221 psi. In accordance with ISO 10567 the lift capacity values represents

www.terex-fuchs.comMarch 2018. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty ap-plicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. © Terex Corporation 2018 · Terex, the Terex Crown design, Fuchs and Works For You are trademarks of Terex Corporation or its subsidiaries.

Terex® Deutschland GmbH | Industriestraße 3 | 76669 Bad Schönborn | Germany | Fon: +49 (0) 7253 84-0 | Fax: +49 (0) 7253 84-102 | [email protected]