Updated: May, 2013
description
Transcript of Updated: May, 2013
Copyright: Valiant Communications Limited - 2013 Slide 1
Ethernet over SDH (STM-1)
Updated: May, 2013
Ethernet over SDH (STM-1)Ethernet over SDH (STM-1)
Product PresentationProduct Presentation
Copyright: Valiant Communications Limited - 2013 Slide 2
Ethernet over SDH (STM-1)
Product Overview Ethernet over SDH (STM-1) Equipment is a modular platform unit with two
pluggable 155.52Mbps optical / electrical interfaces. Used in a point-to-point, chain or ring application to provide a compact, cost
effective and flexible solution to deliver multiple Ethernet channels. Interface card options include the 4x100BaseT Ethernet interface card (1
VCG, 4 Ports 1 Channel), 4x100BaseT Ethernet interface card (4 VCG, 4
Ports 4 Channels) and Gigabit Ethernet interface card options along with
Engineering Order Wire is available. The user removable / replaceable STM-1 Optical / Electrical interface option
makes it easy to meet various and changing user requirements. STM-1, Ethernet and Gigabit Ethernet over SDH Transmission Equipment
provides full capability to cross-connect at VC-12 level between all
tributaries. The equipment can be used as Terminal Multiplexer (TM) or an Add-Drop-
Multiplexer (ADM) to build a point-to-point, chain or ring SDH transmission
network.
Copyright: Valiant Communications Limited - 2013 Slide 3
Ethernet over SDH (STM-1)
Features and Highlights 1U height, 19-Inch standard rack-mountable chassis Service interface
2 x STM-1 optical interfaces, MSA compliant SFP (pluggable) optical
module (LC connector) based design, which supports onsite optical port
replacement 2 x STM-1 electrical interfaces, SFP electrical module (Mini BNC
connector) Optional 4 x 10/100BaseT Ethernet (electric) interface 10/100BaseT (FE) Ethernet Interface Options
• 4 Ports, 4 Channels (4 VCG)• 4 Ports, 1 Channel (1 VCG)
1 x GigE (Gigabit) Ethernet interface Options• Optical GigE (Gigabit) Ethernet interface• Electrical 1000BaseT (Gigabit) Ethernet Interface
Copyright: Valiant Communications Limited - 2013 Slide 4
Ethernet over SDH (STM-1)
Features and Highlights Provides complete diagnostics facilities to the user for monitoring optical ports
and provide reading of optical transmit power, optical receive power, laser
temperature, bias current in voltage alarms etc. Performance Monitoring and Alarms - Error counts for B1, B2, B3 Performance Analysis - Error Seconds (ES), Several Error Seconds (SES),
Unavailable seconds (UAS), Higher Order Virtual Container - Remote Error
Indication (HOVC-REI), Higher Order Virtual Container - Pointer Justification
Event (HOVC-PJE) Management and Maintenance interfaces
10/100BaseT Ethernet management interface RS232 serial management interface Remote (Telnet) management interface Windows XP based Graphical User Interface (GUI) Windows 7 based Graphical User Interface (GUI) SNMP V2 Monitoring Engineering Order Wire (EOW) interface (RJ-11).
Copyright: Valiant Communications Limited - 2013 Slide 5
Ethernet over SDH (STM-1)
NMS (Network Management System) for monitoring multiple units from a
single / central location. Timing mode
Synchronization with STM-1 line timing External timing source - 120 Ohms 2MBps (External Bits Clock) - Factory
Configurable External timing source - 120 Ohms 2MHz (External TTL Clock) - Factory
Configurable Internal Clock - ITU-T G.813 internal oscillator (Stratum 3) The timing source can be auto-switched according to default or operator
programmed settings Ethernet Standards Conformity
Generic Framing Procedure GFP-F compliant with ITU-T G.7041 VCAT compliant with ITU-T G.707 and LCAS compliant with ITU-T G.7042 Ethernet flow control on WAN port and LAN port Large buffer size upto 410,000 bytes
Features and Highlights
Copyright: Valiant Communications Limited - 2013 Slide 6
Ethernet over SDH (STM-1)
Maximum Frame length (MTU size):1536 bytes with 4 port 1 channel (1 VCG) Ethernet Card Maximum Frame length (MTU size):2036 bytes with 4 port 4 channel (4 VCG) Ethernet Card Auto MID/MID-X for Ethernet Interfaces Support 802.1Q based VLAN tagging (4 ports 1 channel (1 VCG)
Ethernet Card only) Support Port based VLAN tagging (4 ports 1 channel (1 VCG) Ethernet
Card only) Performance Analysis
• All Received Packets• All Transmitted Packets• Received Dropped Packets
Ethernet bandwidth can be adjusted by the user between 2Mbps ~126
Mbps (VC-12 mapping) Supports MAC Address list filtration, learning and updating function
Features and Highlights
Copyright: Valiant Communications Limited - 2013 Slide 7
Ethernet over SDH (STM-1)
Supports 1+1 Line Protection and Automatic Protection Switching (APS) with
less than 50ms recovery Supports point-to-point, ring and chain topology (4 VCG card only) Supports Remote Power Down Detection and Auto Laser Shutdown Supports STM-1 loop-back for troubleshooting 850nm multi-Mode, 1310nm Single Mode and 1550nm Single Mode optical
interface options offered Ethernet mapping adopts GFP/VC-12 virtual concatenated technology;
according with MSTP criterion Provides Ethernet over SDH mapping through standard GFP and VC-12
virtual concatenation (VCAT) Easy to operate Redundant power supply card (EMI/EMC Complied) options AC+DC,
DC+DC and AC+AC. 110V AC - 240V AC (50/60 Hz) power options available -48V and - 4V DC power option available
Power consumption less than 12W.
Features and Highlights
Copyright: Valiant Communications Limited - 2013 Slide 8
Ethernet over SDH (STM-1)
Alarm and Indicator Monitoring Power Indicator Current Status (integrity and activity) Indicator Urgent Alarm Indicator Minor Alarm Indicator Optical Signal Loss Alarm Indicator Remote Device Power-down Indicator Ethernet Card Status Indicator General Alarm Indicator for Ethernet Card (including Link-down of Ethernet
Port) Auto Laser Shutdown (ALS) Indicator Engineering Order-Wire (EOW) Indicator Ethernet Link Indicator Ethernet Speed Indicator Dry contact via 9-pin, D-type male connector Buzzer Alarm SNMP Diagnostic and Monitoring
Copyright: Valiant Communications Limited - 2013 Slide 9
Ethernet over SDH (STM-1)
Application Diagram
Point to point network (Shared Link Mode) 1 VCG card application
STM-1 Link
LAN
LAN
ROUTER
ROUTER
LAN
LAN
ROUTER
ROUTER
SDH STM-1 Link
Ethernet over SDH (STM-1) Ethernet over SDH (STM-1)
Copyright: Valiant Communications Limited - 2013 Slide 10
Ethernet over SDH (STM-1)
Application Diagram
Point to point network (Discrete Link Mode) 4 VCG card application
STM-1 Link SDH STM-1 Link
Ethernet over SDH (STM-1) Ethernet over SDH (STM-1)
LAN
LAN
ROUTER
ROUTER
LAN
LAN
ROUTER
ROUTER
Copyright: Valiant Communications Limited - 2013 Slide 11
Ethernet over SDH (STM-1)
Front Panel Description
Copyright: Valiant Communications Limited - 2013 Slide 12
Ethernet over SDH (STM-1)
Switches
ADDRESS NE / EOW (Phone) address switch
MUTE Alarm speaker mute / unmute switch
LED Indicators
PWR (Green) Power indicator
RUN (Green) Running indicatorUALM (Red) Urgent alarm indicatorDALM (Yellow) Minor alarm indicatorNOP A/B (Red) Optical / electrical signal loss Alarm indicatorRPD A/B (Yellow) Remote device power-down indicatorETH (Green) Ethernet card existing status indicatorTALM (Red) General alarm indicator for Ethernet card
ALS ALS (Green) Auto Laser Shut enable / disable status indicatorAuto Laser Shut enable / disable status indicator
BUSY BUSY (Green) EOW (Phone) status indicator
Copyright: Valiant Communications Limited - 2013 Slide 13
Ethernet over SDH (STM-1)
Access Interfaces
CONSOLE (RJ-45) Serial network management interface for CLI
management
EMU (RJ-45) Ethernet network management interface
Optical Interfaces
OPTA SFP based optical / electrical interface A
OPTB SFP based optical / electrical interface B
External Alarm (U/DALMO) Interface
U/DALM (DB-9) Urgent (major) and differed (minor) external alarm
interface
Copyright: Valiant Communications Limited - 2013 Slide 14
Ethernet over SDH (STM-1)
User Channel (RS232) Interface
RS2322 (RJ-45) User channel interface, RS232 level, used to
transmit the collected alarm information of the
telehouse, the user control information and
etc.
EOW Interfaces
EOW Interface (RJ-11) Engineering Order Wire (Phone) interface,
Ordinary telephone set with two line
mode can be used.
External Management / Timing Interfaces
ETS1/ETS2 (RJ-45) Two external timing source (TTL or Bits) interfaces
EXM1/EXM2 (RJ-45) Two external management interfaces
Copyright: Valiant Communications Limited - 2013 Slide 15
Ethernet over SDH (STM-1)
Rear Panel Description
Copyright: Valiant Communications Limited - 2013 Slide 16
Ethernet over SDH (STM-1)
AC and DC Power Supply
Ethernet Options
SOCKET 3 Ethernet Card, (4 x RJ-45)
Option 1 – 4 Ethernet ports, 4VCG (4 port, 4 channel) – Standard configuration
Option 2 – 4 Ethernet ports, 1VCG (4 port, 1 channel).
Power Slot Two power card slots, one for 110V AC - 240V AC (50/60 Hz),
the other is -48V DC.
Two different cards (AC+DC) or two same cards (AC+AC,
DC+DC) can be inserted into the device simultaneously.
Power Switch ON / OFF switch,
'1': Power ON,
'0': Power OFF.
Copyright: Valiant Communications Limited - 2013 Slide 17
Ethernet over SDH (STM-1)
Management Options Easy to use CLI commands through RS232 serial connection and TCP/IP
TELNET connection SNMP V2 Management through MIB browser DIP switch settings given on front panel Windows XP / Windows 7 based GUI (Graphical User Interface) to access
the equipment over RS232 serial connection, TCP/IP and SNMP protocol.
Alarms and Indicator Monitoring SNMP based Alarms (TRAPS) event monitoring through MIB browser and
NMS Visual alarm indicators in the front panel Ethernet (Data) port speed and mode status Real time Buzzer alarm for any alarm event.
Copyright: Valiant Communications Limited - 2013 Slide 18
Ethernet over SDH (STM-1)
Monitoring and Managing multiple systems from a central location over
RS232 serial connection (Local), TCP/IP TELNET and SNMP Protocol (LAN
or Remotely) Monitoring single system Monitoring multiple systems
• NMS (Network Management System) provides the facility to monitor
multiple systems from a central location and provide alert (SNMP
based) if any alarm event occurs on any Network Element (NE).
NMS (Networks Management System) built in GUI
Copyright: Valiant Communications Limited - 2013 Slide 19
Ethernet over SDH (STM-1)
Thank you for your attentionThank you for your attention
For more details visit us at our Website at
http://www.valiantcom.com
U.K.
Valiant Communications (UK) Ltd1, Acton Hill Mews,310-328 Uxbridge Road,London W3 9QN, United Kingdom
INDIA
Valiant Communications Limited71/1, Shivaji Marg, New Delhi - 110015, India
SOLD BY:
Aries Telecom and Trading Corp. FZEPO Box 31291, Al-Jazeera Al-Hamra, Ras Al Khaimah, U.A.E. Ph: +971 56 1361308E-mail: [email protected]: http://www.ariestelecom.com
U.S.A.
Valcomm Technologies Inc.4000 Ponce de Leon, Suite 470Coral Gables, FL 33146United States of America
Website: http://www.valiantcom.com
Website: http://www.valiantcom.com Website: http://www.valiantcom.com