Update PNMS WinVista

8/9/2019 Update PNMS WinVista

1/17

ROI-S06869-052E

P ASOLINK

N ETWORK M ANAGEMENT S YSTEM

PNMS (Java version)Update Manual (Windows Vista)

NEC CorporationCopyright 2010


2/17

ROI-S06869

- i -

Table of Contents

1. Installation Sequence and Flow.. ................................................................................................. 1

2. Backing up the PNMS Settings .. ................................................................................................. 2

3. Uninstalling PNMS.. .................................................................................................................... 3

4. Installing PNMS .. ........................................................................................................................ 6

5. Restoring the backup setting files.. .............................................................................................. 7

6. Updating Configuration files and Executing PNMS .. ................................................................. 9

7. Clearing PNMSj Client Cache (Solaris)... ................................................................................. 10

8. Clearing PNMSj Client Cache (Internet Explorer)... ................................................................. 12


3/17

ROI-S06869

- 1 -

1. Installation Sequence and Flow

PNMS installation sequence

Step1: Backing up PNMS Settings

Step2:Deinstalling PNMS

Step3: Installing PNMS

Step4: Restoring PNMS Settings

Step5: Launching PNMS

(*) PNMS: Pasolink Network Management System


4/17

ROI-S06869

- 2 -

2. Backing up the PNMS Settings

Refer to the PNMS Operation Manual for details.

[NOTE]

Please use backup a directory other than the PNMS installation directory to backup the PNMSsettings.

Otherwise the backup PNMS setting files may be inadvertently deleted.


5/17

ROI-S06869

- 3 -

3. Uninstalling PNMS

(1) Open Add/Remove Programs Properties on Control Panel[Start] Menu [Control Panel] Menu

(2) Click Uninstall a Program in the Control Panel.


6/17

ROI-S06869

- 4 -

(3) Double-click PNMSj on Unistall or change a program window.

(4) The User Account Control window appears. Click [Continue] .

(5) Introduction window appears. Click [Uninstall] .


7/17

ROI-S06869

- 5 -

(6) During uninstallation, this window appears.

(7) Click [Done] to close the PNMS installation wizard.

[NOTE]Delete following directories when you wish to delete all files related to PNMS.

- PNMSj Install Directory.

This directory is C:\PNMSj when default install.

- PNMSj Stored Log Directory.

This directory is C:\Documents and Settings\\My Documents when

default install.


8/17

ROI-S06869

- 6 -

4. Installing PNMS

Refer to the PNMS Installation manual for details..


9/17

ROI-S06869

- 7 -

5. Restoring the backup setting files

Refer to the PNMS Operation Manual for details.

To enable PNMSj client use, the following setup must again be done.

Please refer to the following manuals for the setup detail.

- Server Setting Manual

Please perform the following procedure when upgrading from any PNMSj Version prior to1.19.xxx.xxx. (Rebooting is necessary after performing this procedure.)

[NOTE]

If and when Update Network Configuration is done without performing this procedure, GroupMap data will be initialized with all NEs being deleted and added.

NCT file is necessary to perform this procedure. If a specific NE does not exist in applicable NCT file being used, its location in Group Map and related properties of that particular NE will be initialized.

(1) Please create nct folder under [PNMSj installation folder]\config.


10/17

ROI-S06869

- 8 -

(2) In nct folder created above, please save NCT file used to backup data.

[NOTE]Created nct folder will automatically change to nct[current time] after PNMSj is rebooted.


11/17

ROI-S06869

- 9 -

6. Updating Conf iguration f iles and Executing PNMS

(1) Click Start ALL Programs PNMSj PNMS to start the application.

(2) PNMS configuration data is updated when PNMS Login window appears.

If you wish to customize new functions, the PNMS will finish. Otherwise, you maycontinue using PNMS.

(3) Configure the PNMS setting files and run the PNMS.


12/17

ROI-S06869

- 10 -

7. Clearing PNMSj Client Cache (Solaris)

When using PNMSj client, follow the procedures described below (the screen shots arefrom Solaris 10).

(1) Open the terminal by right-clicking anywhere on the desktop to display the workspace

menu and input command : javaws uninstall, if you want to clear all caches.

(2) If you want to clear any cache, input the command on the Terminal window: javaws viewer


13/17

ROI-S06869

- 11 -

(3) Select cache to clear and click button.

(4) Continue repeating step (3) until every PNMSj JAVA Web Start application has beenremoved.

(5) Following the instructions in the PNMS Client Installation Manual w ith Java WebStart manual, launch the PNMSj client server.


14/17

ROI-S06869

- 12 -

8. Clearing PNMSj Client Cache (Internet Explorer)

When using PNMSj client with Internet Explorer, follow the procedures described below.

(1) Open the Control Panel and select Java.

(2) This opens the Java Control Panel. On the [General] tab click [Setting] button.


15/17

ROI-S06869

- 13 -

(3) Click the [Delete Files] button.

(4) Confirm that checking on [Application and Applets] and [Trace and Log Files] .Click [OK].

(5) Select Internet Options in the Control Panel and open the Internet property window.


16/17

ROI-S06869

- 14 -

(6) In Internet Explorer 6, on the [General] tab click the [Delete Files ...] button underTemporary Internet f iles . Go to step 9.

(7) In Internet Explorer 7, on the [General] tab click the [Delete Files ...] button underBrowsing history .


17/17

ROI-S06869

15

(8) Click the [Delete Files] button under Temporary Internet f iles .

(9) Following the instructions in the PNMS Client Setting Manual w ith InternetExplorer manual, launch the PNMSj client server.

Update PNMS WinVista

Documents

Transcript of Update PNMS WinVista