Universiti Teknologi PETRONAS. INTRODUCTION Problem statement: Existing shoe racks have limited...
-
Upload
posy-pierce -
Category
Documents
-
view
222 -
download
1
Transcript of Universiti Teknologi PETRONAS. INTRODUCTION Problem statement: Existing shoe racks have limited...
Universiti Teknologi PETRONAS
ENGINEERING TEAM PROJECTASROY ANGKOI
13691AHMAD ZAKWAN BIN NORANI 13633AQILAH BINTI ABU BAKAR 13677KHAIRIL ANUAR BIN MOHD KAMAL 13839SARA SAYED MOHAMED ABDELAAL 13488NOR HAZIQ NAQIUDDIN BIN HAMLI 13547
Group 68
2
INTRODUCTIONProblem statement:• Existing shoe racks have limited storage capacity.• Limited storage leads to the shoes becoming
unorganized.• Other problems such as disturbing view and
unpleasant odors are caused by the storage of too many shoes in small space.
Universiti Teknologi PETRONASGroup 68
3
INTRODUCTIONObjectives:Designing a shoe rack that’s :
Cheap
Eliminates problems of bad odor and disorganization.
Stores many shoes without causing a mess.
Universiti Teknologi PETRONASGroup 68
4
INTRODUCTIONBackground• 33% of the shoe owners have trouble finding the
space to store all of their shoes collection. In order to solve the problem, shoe rack was invented as a storage unit designed to store shoes.
• There are various types of shoe rack designed based on the customer’s need such as under the bed shoe racks, over the door shoe racks, free standing shoe racks, hanging shoe racks and rotating shoe racks.
Universiti Teknologi PETRONASGroup 68
5
Universiti Teknologi PETRONASGroup 68
INTRODUCTIONWhat’s a ‘3-in-1 Shurack’?• ‘3-in-1 ShuRack’ is a shoe rack which can make
it easier for the user to get their shoes, energy saving, preventing the unpleasant smell inside the shoe rack and has a compartment to store things, a foldable chair for the ease of the user to put their shoes.
6METHODOLOGY
Design concept
Universiti Teknologi PETRONASGroup 68
7
Universiti Teknologi PETRONASGroup 68
METHODOLOGY
METHODOLOGY
Universiti Teknologi PETRONASGroup 68
8
METHODOLOGY
Universiti Teknologi PETRONASGroup 68
9
METHODOLOGY
Universiti Teknologi PETRONASGroup 68
10
• In order to solve the entire problem discussed in the problem statement, the team came up with this design:
Figure 5: Overall view for shoe rack.
Accessories compartment
Electronic compartment
Door Foldable chair
The shoe rack was divided into three compartments :
Compartment Description
Electric Compartment
Made so that all the electronic parts (motor, gear, humidifier, and fan) are put together in the same place. Which makes it easier to maintain.
Rotating Compartment
This compartment is where the rotating part of the shoe rack is placed, and the shoes are stored.
Accessories Compartment
This is where all socks and accessories are stored. It helps the user because it stores everything in one place
Universiti Teknologi PETRONASGroup 68
11
Universiti Teknologi PETRONASGroup 68
121.Electronic
compartment dehumidifier
Motor
Universiti Teknologi PETRONASGroup 68
13
Gear
Belt
Motor
Small Fan
1.Electronic compartment
Universiti Teknologi PETRONASGroup 68
142. Rotating
compartment
Universiti Teknologi PETRONASGroup 68
153. Accessories
compartmentAccessories compartment
Universiti Teknologi PETRONASGroup 68
16Final Design
Universiti Teknologi PETRONASGroup 68
17
Material SelectionENGINEERING ANALYSIS
Material FunctionWood Rotating compartment,
rotating bar, chair.
Perspex The entire shoe rack body
Aluminum Frame around shoe rack, rotating wheels
Universiti Teknologi PETRONASGroup 68
18Material Selection
Polymethyl Methacrylate (Perspex):• Good impact strength.• High service temperature.• Low costAluminum:• Cost effective• Corrosion resistance• Light weightWood:• Durable• efficient
Universiti Teknologi PETRONASGroup 68
19ENGINEERING ANALYSIS
In order to determine the best motor to be used for the shoe rack, the following formula is used:
speed of rotation= Where, 2πr = circumference of the wheel
Universiti Teknologi PETRONASGroup 68
20
Load on the bars carrying the shoes are calculated using the formula:
Load on the chair is calculated using the formula:
Universiti Teknologi PETRONASGroup 68
21Dehumidifier
Rock salt was chosen for the dehumidifier. In order to absorb the moisture content of air in the shoe rack. Rock salt can be easily obtained and can even be made at home.
Fan
Air inlet
Rock salt
Universiti Teknologi PETRONASGroup 68
22
Rate of saturation of rock salt can be calculated using the formula:
Dehumidifier
Universiti Teknologi PETRONASGroup 68
23
Universiti Teknologi PETRONASGroup 68
24
Universiti Teknologi PETRONASGroup 68
25
Universiti Teknologi PETRONASGroup 68
26
Universiti Teknologi PETRONASGroup 68
27
Universiti Teknologi PETRONASGroup 68
28
Universiti Teknologi PETRONASGroup 68
29
Universiti Teknologi PETRONASGroup 68
30