UNITRONIC BUS HFFR L2/FIP FC UL/CSA€¦ · Insulation resistance 8.7 Ohm/km DCR loop 15 x OD 75...
1
245.0 -30°C to +75°C 8.35 dB/100 m at 600 MHz Attenuation loss Min. 1000 MOhm.km Insulation resistance 8.7 Ohm/km DCR loop 15 x OD 75 +/- 3 Ohm PVC compound outer sheath, yellow PE compound bedding, black with PE mylar embed Railing of parallel bare copper outer conductor Foam PE insulation, white Solid bare copper conductor RoHS compliant Flame retardant in acc. to IEC 60332-1 Transmission and data networking Optimized up to 600 MHz in VHF/UHF bare copper for homogenous transmission Leaky coax constructed with railing of parallel subway, underground facility Suitable for use in tunnels, mining areas Signal transmission by RF leaky concept RG TUNNEL CABLE FC Strip stripping tool www.lappgroup.com Data communication systems UNITRONIC BUS HFFR L2/FIP FC UL/CSA ■ Benefits ▯ “Fast Connect” (FC) cable design ■ Application range ▯ Application where the combination of halogen free outer sheath with properties similar to polyurethane and enhanced flame retardancy is requested ■ Product features ▯ Cable is UL/CSA approved (CMG) ▯ Halogen-free ▯ Flame retardant in accordance with IEC 60332-3 ▯ Oil-resistant ▯ The stated bit rates allow the following cable lengths (maximum) according of PROFIBUS User Organisation of one bus segment (Type A cable, PROFIBIS-DP): 93.75 kbit/s = 1200 m 187.5 kbit/s = 1000 m 500 kbit/s = 400 m 1.5 Mbit/s = 200 m 12.0 Mbit/s = 100 m ■ Approvals (Norm references) ■ Product Make-up ▯ Solid bare copper conductor ▯ PE core insulation ▯ Inner sheath, screening foil and copper braid- ing ▯ Thermoplastic outer sheath ▯ Colour: violet (RAL 4001) ■ Technical data Approvals UL/CSA (CMG) Mutual capacitance approx. 28.5 nF/km Peak working voltage Max. 100 V (not for power applications) Impedance at 3 - 20 MHz: 150 +/- 15 Ohm Conductor resistance max. 100 Ohm/km Minimum bending radius 65mm Test voltage 1500 V core/core Range of temperature -30°C to +70°C Part number Article designation Number of pairs and con- ductor diameter in mm Outer diameter in mm approx. Copper index kg/km Weight kg/km approx. Stationary application 2170853 UNITRONIC BUS HFFR L2/FIP FC UL/CSA 1 x 2 x 0.64 8.0 30.1 75.0 Copper price basis: EUR 150 / 100 kg Our standard lengths, please visit: www.lappkabel.de/en/cable-standardlengths Packaging size: Coil ≤ 30 kg and ≤ 250 m, otherwise drum Please specify the desired packaging size (e.g. 1 x 500 m drum or 5 x 100 m coils) LAPPKABEL is a member of the INTERBUS CLUB user organization ■ Accessories ▯ ▯ Info ■ Benefits ▯ ■ Application range ▯ ■ Product features ▯ ▯ ■ Approvals (Norm references) ■ Product Make-up ▯ ▯ ■ Technical data Minimum bending radius Characteristic impedance Part number Outer diameter in mm approx. Weight kg/km approx. 63 ▯ ▯ ▯ ▯ ▯ 3803150 SLYWV7510BC Type Conductor diameter in mm 2.31 15.5 Range of temperature ▯ Homogenous Tranmission Leaky Coax ▯ Tunnel, Mining 75 Ohm ▯ Coupling loss 60 dB at 85 MHz 70 dB at 150 MHz
Transcript of UNITRONIC BUS HFFR L2/FIP FC UL/CSA€¦ · Insulation resistance 8.7 Ohm/km DCR loop 15 x OD 75...
245.0
-30°C to +75°C
8.35 dB/100 m at 600 MHzAttenuation lossMin. 1000 MOhm.kmInsulation resistance8.7 Ohm/kmDCR loop
15 x OD
75 +/- 3 Ohm
PVC compound outer sheath, yellow PE compound bedding, black with PE mylar embed Railing of parallel bare copper outer conductor Foam PE insulation, white Solid bare copper conductor
RoHS compliantFlame retardant in acc. to IEC 60332-1Transmission and data networkingOptimized up to 600 MHz in VHF/UHFbare copper for homogenous transmissionLeaky coax constructed with railing of parallel
subway, underground facilitySuitable for use in tunnels, mining areas
Signal transmission by RF leaky concept
RG TUNNEL CABLE
FC Strip stripping tool
www.lappgroup.com
Data communication systems
UNITRONIC BUS HFFR L2/FIP FC UL/CSA
■ Benefits▯
“Fast Connect” (FC) cable design
■ Application range▯
Application where the combination of halogen free outer sheath with properties similar to polyurethane and enhanced flame retardancy is requested
■
Product features▯
Cable is UL/CSA approved (CMG)▯
Halogen-free▯
Flame retardant in accordance with IEC 60332-3
▯
Oil-resistant
▯
The stated bit rates allow the following cable lengths (maximum) according of PROFIBUS User Organisation of one bus segment (Type A cable, PROFIBIS-DP):
93.75 kbit/s = 1200 m
187.5 kbit/s = 1000 m
500 kbit/s = 400 m
1.5 Mbit/s = 200 m
12.0 Mbit/s = 100 m
■ Approvals (Norm references)
■
Product Make-up▯
Solid bare copper conductor▯
PE core insulation▯
Inner sheath, screening foil and copper braid-ing
▯
Thermoplastic outer sheath▯
Colour: violet (RAL 4001)
■
Technical dataApprovalsUL/CSA (CMG)Mutual capacitanceapprox. 28.5 nF/kmPeak working voltageMax. 100 V (not for power applications)Impedanceat 3 - 20 MHz: 150 +/- 15 OhmConductor resistancemax. 100 Ohm/kmMinimum bending radius65mmTest voltage1500 V core/coreRange of temperature-30°C to +70°C
Part number Article designation Number of pairs and con-ductor diameter in mm
Outer diameter
in mm approx.Copper index
kg/kmWeight
kg/km approx.Stationary application
2170853 UNITRONIC BUS HFFR L2/FIP FC UL/CSA 1 x 2 x 0.64 8.0 30.1 75.0
Copper price basis: EUR 150 / 100 kgOur standard lengths, please visit: www.lappkabel.de/en/cable-standardlengthsPackaging size: Coil ≤ 30 kg and ≤ 250 m, otherwise drumPlease specify the desired packaging size (e.g. 1 x 500 m drum or 5 x 100 m coils)LAPPKABEL is a member of the INTERBUS CLUB user organization
■ Accessories▯
▯
Info
■ Benefits▯
■ Application range▯
■
Product features▯
▯
■ Approvals (Norm references)
■
Product Make-up▯
▯
■
Technical data
Minimum bending radius
Characteristic impedance
Part number Outer diameter
in mm approx.
Weight
kg/km approx.
63
▯▯
▯
▯▯
3803150 SLYWV7510BC
Type Conductor diameterin mm
2.31 15.5
Range of temperature
▯ Homogenous TranmissionLeaky Coax
▯ Tunnel, Mining
75 Ohm▯
Coupling loss@@60 dB at 85 MHz@@70 dB at 150 MHz
