UNIO SA–ROMANIA MANUFACTURER AND SUPPLIER OF CONVEYING EQUIPMENT ON FLOW AND TECHNOLOGICAL...

UNIO SA – ROMANIA

MANUFACTURER AND SUPPLIER OF CONVEYING

EQUIPMENT ON FLOW AND TECHNOLOGICAL EQUIPMENT

SINCE 1911

Hersteller und Lieferant von Forderanlagen und technologische Ausrustungen

GENERAL PRESENTATION

Adress: UNIO SA 35, Lucian Blaga Blvd.440227 – SATU MARE, ROMANIATel: +40 261 766120Fax: +40 261 761735Email: [email protected]

Location: UNIO SA is located in SATU MARE, a 120 000 inhabitants town, situated in North-West of Romania, at 10 Km from Hungarian border and at 60 Km from M3 Highway

SINCE 1911

UNIO SA ist in Satu Mare, in Stadt sind 120 000 Einwohner, liegt in Nord-West Rumanien, 10 km entfernt von ungarische Grenze und 60 km entfernt von M3 Autobahn aus Ungarn.

mailto:[email protected]

SINCE 1911

UNIO – General informationCapital/ Kapital: 7,5 millions USD Established/ Gegrundungsjahr: 1911, private since 2000Employees/ Mitarbeiter : 920Total surface/ Ges Oberflache: 18 ha Production surface/ Prod Oberflache: 6 ha Crane/ Kran ( max): 50 tonsMilling/ Fraesen ( max): 14000x3000x2500 mmTurning/ Drehen – orizontal (max):dia 2100x8000 mm -vertical (max): dia 5000x2500 mm

Stress relieve/ Spannungsarm gluchen (max): 11000x3300x3000 mmTurnover/ Umsatz (2012): 20 millions Euro

Spur Gears/ Zahnrader: Dia 1200 mm, modul 25, precision class ISO 5-6

SINCE 1911

TECHNOLOGICAL

•Engineering and service/ Konstruktion

•Cutting and bending/ Schneiden und Biegen

CAPACITIES

•Forge, foundry and heat treatment/ Schmiederei, Giesserei und Warmebehandlung

•Mechanical processing/ Mechanische Bearbeitung

•Welding/ Schweissen•Destructive and non-destructive testing/ DT und NDT Prufung

•Assembling and trial assembly testing/ Montage und Prufmontage

•Control and certifications/ Kontrolle und Zertifizierung

Technological capacitiesSince 1911

Material cutting/ Material schneidenComputer controlled oxi-gas cutting machines/ Computer gesteuerte Brennen mit GasCarbon steel plates

Computer controlled plasma cutting machines/ Computer gesteuerte plasma SchneidmaschineStainless steel

Sawing machines / SaegenRound bars , tubes and pipes

Thickness ( max.): 200 mmLength : 12 000 mmWidth: 2500 mm

Thickness ( max.): 20 mmLength : 12 000 mmWidth: 2500 mm

Diameter ( max.) : 400 mmLength : 12 000 mm

Forging / SchmiedenOpen die die:Rings :up to 1200mm diameterShafts: up to Dia. 450 mmand 4000 mm lenght

Material calandering/ WalzenThree roll Calander :Steel PlatesThickness ( max.) : 22 mm at 3 000 mm widthDiameter (max): 6000 mm

Material bending/ Biegen600 tons Bending machine :Steel PlatesThickness ( max.) : 12 mm at 4 000 mm width

Technological capacitiesCertificates and authorizations:

Since 1911

•AD 2000- Merkblatt HP0, TRD 201 and ISO3834-2 ( TUV)

Welding / Schweissen:

Welding processes/ Schweissverfahren: 111, 135, 136 –MIG, MAG

Authorized welders/ Schweißer mit Zulassung : 30 ( GL, SLV, TUV)

International Welding Engineers: 3

•DIN 18800- 7:2002-09 Klasse E (SLV)

•Aproval for welding – Germanischer Lloyd Rules(GL)

•3 INTERNATIONAL WELDERS ENGINEERS

•50 TUV, GL and SLV authorized welders

Since 1911

Technological capacities

Mechanical processing : turning/ DrehenVertical turning

Diameter: max. 5000 mmHeight: max 2800 mm

Since 1911


Mechanical processing : turning (Drehen)Horizontal turning ( CNC)

Diameter: max. 2100 mmLenght: max 8000 mm

Since 1911


Mechanical processing : Milling and boringMachining centers ( CNC) Fresen und Bohren

X: max 14000 mmZ: max 3800 mmY : max 2500 mm

Since 1911


Mechanical processing : Milling and boringMachining centers ( CNC)



Mechanical processing : Milling and boring

Since 1911


Mechanical processing : Milling and boringMachining centers ( CNC)


Since 1911


Gear cutting - VerzahnungSpur Gear cutting machines

Diameter :max. 5000 mmModul: max.42 mmPrecision class: 9-11

Since 1911

Technological

Gear grinding (Schleifen)

Spur gear grinding machines ( Niles):

Diameter: max. 1200 mmModul: max. 24 mmPrecision class: 4-5

capacities

Since 1911


Heat treatment (Waermebehandlung)Stress relieving – spannungsarm

GluehenHardening, Annealing, Induction hardening

Dimensions : 3700 x 3500 x 11000 mm

Since 1911


Assembling works: (Montage)

Mechanical assembling:On assembling platforms, max. crane capacity 50 Tons

Since 1911


Assembling works:

Hydraulic, electric and pneumatic assembling:

Since 1911


Surface protection:- Sandblasting (Sandstrahung)-Painting (Lackierung)-Galvanizing, Browning

Since 1911


Surface protection:- Sandblasting-Painting-Galvanizing, Browning

Since 1911

Quality assurance

Control possibilities

Nondestructive testing:Ultrasonic testingMagnetic particle inspectionLiquid penetrant testingX- rays testing

Since 1911

Quality assurance

Control possibilities

Hardness tests: (Haertepruefung)Brinell Vickers Rockwell Microhardness

Destructive tests:Stress tests Impact tests Chemical tests Metallographic tests

StresstestsKerbschlagbiegeversuchChemische PrüfungenMetallografische Tests

Zerstörerische Prüfung

Since 1911 Quality assurance

Control possibilities (3D-Messmaschienen)Computer Measuring Machines (CMM) CMM Ghibli Trax – Brown&Sharpe – DTable dimensions:2600x1200x1000 mm

Precision: 0.0025 mm

Since 1911

Quality assurance (3D-Messmaschiene)

Control possibilitiesComputer Measuring Machines (CMM): CMM Stiefelmeyer

Table dimensions:6000x3000x2000 mmPrecision: 0.0025 mm

Since 1911

Quality assurance

Certificates and Authorisations

ISO 9001:2001 ISO 14001:2005 ISO 18001:2008

•

Since 1911

CONVEYING EQUIPMENT ON FLOW

Foerderanlagen – UNIO Basisprodukten

Conveying equipment on flowBelt conveyers for general use

Conveying equipment on flow /Belt conveyers for general use/

Conveying equipment on flow

Belt conveyers for open pits/

Conveying equipment on flowBelt conveyers for open pits/

Conveying equipment on flowScraper conveyers - for underground

Kettenfoerderanlagen

Conveying equipment on flowApron conveyers-for waste and ashes transport/

Plattenfoerderanlagen

Conveying equipment on flowApron conveyers-for automotive assembling lines

Foerderanlagen fuer Automobileindustrie

Conveying equipment on flowWagons for lime transport in cement factories area

Wagen fuer Zementfabrik

Since 1911 Conveying equipment on flow

MINE LOCOMOTIVES AND LOADERS

Lokomotive und Lademaschienen fuer Bergbau

Material processing equipmentOven( Dia. 4800mm) for nonferrous metals processing

Ofen fuer Nichteisenmetalle

Material processing equipmentOven( Dia. 4800mm) for nonferrous metals processing

Material processing equipmentBucket wheel( Dia. 14.0 m) for bulk material transport

Schaufelradbagger (Durchmesser 14,0 m) für Schüttgut Transport

Material processing equipmentBucket wheel( Dia. 14.0 m) for bulk material transport

Conveying equipment on flowSince 1911

Autogenous and ball mills/ (Kugelmuehlen)

CONVEYING EQUIPMENT ON FLOW

Overhead conveyers and Hoisting equipment - Hebezeuge

Since 1911

Technological equipment andindustrial projects

Tehnologischesausruestungen Zulieferant

•

•

•

•

Equipment for off-shore projects and maritime

Transfer systems for metallurgy

Equipment for assembling lines for automotive

Equipment for plastic technology

Mechanical transmissions

industry

industry•

•

Fuer Walzindustrie, Schiffbauindustrie, Automobileindustrie, ……

Equipment for offshore projects90 tons winch frame – bolted in parts for transportSchiffbau - 90 Tonnen Windenbock - auch in Teilen für den Transport verschraubt

Equipment for offshore projects90 tons winch frame – bolted in parts for transport

Equipment for offshore projects60 tons Trichter– for CAEN Harbor

60 To – Trichter fuer Hafen

Equipment for offshore projects60 tons Trichter– for CAEN Harbor

Equipment for offshore projects –Turned GROOVED DRUMS up to 2.1 m dia.

Trommel mit Rillen - Drehmaschienen

Equipment for offshore projectsHoisting system for technologic robots- 200 tons

Fully assembled in UNIO

Hebelausruestung

Technological equipment and industrial projectsEquipment for maritime industry – Draghead – 65 tons

3 parts cutted fortransport

65 To – Baggerkopf fuer Schiff

Technological equipment and industrial projects

Equipment for maritime industry – Draghead – 40 tons


Equipment for maritime industry – Draghead – 60 tons


Equipment for maritime industry – Bow conection– 40 tons

Technological equipment and industrial projectsTanks for railways wagons – Behaelter fuer Wagen

Technological equipment and industrial projectsEquipment for maritime industry - Gantries

Kraene fuer Schiffe

Technological equipment and industrial projectsEquipment for maritime industry - Overflows

Stahlkonstruktion fuer Schiffe


Equipment for maritime industry

Since 1911

Technological equipment and

industrial projects• Transfer systems for metallurgy - Fördersysteme für die Metallurgie


Transfer systems for metallurgy

Since 1911


• Equipment for assembling lines for automotive industry

Ausrüstung für Montagelinien für die Automobilindustrie


Equipment for assembling lines for automotive industry


Equipment for bulk handling - Foerderanlagen

Since 1911


Getriebe

• Mechanical transmissions

Since 1911


Gears for truck transmissions- General Electric


Gears for wind turbines - Zollern

UNIO SA–ROMANIA MANUFACTURER AND SUPPLIER OF CONVEYING EQUIPMENT ON FLOW AND TECHNOLOGICAL...

Documents

Transcript of UNIO SA–ROMANIA MANUFACTURER AND SUPPLIER OF CONVEYING EQUIPMENT ON FLOW AND TECHNOLOGICAL...