Unicorn Bicycles Distribution 2012 Catalogue

Collection 2012Collection 2012

Catalog 2012.indd 1 2/27/2012 9:34:54 PM

Contents

CoalitionBar Joe Riley Bar p.16Holycross Bar p.16 GripsHoe Grip p.16Team Grip p.16 Barends Nylon Barends p.16 Seat Conduit Pivotal Seat p.17Hand Of Death Seat p.17Hell On Earth Seat p.17The Machinist Seat p.17World Wide Seat p.17E�gy Seat p.17StemPovah Topload Stem p.17Povah Front Load Stem p.17

SuperStarGrande Edition Carlton Frame p.20Watson Frame p.20Cooper Frame p.21 Fork p.21 Handlebar p.21 FrameCarlton Frame p.22Watson Frame p.22Cooper Frame p.23Parts Handlebar p.23Fork p.23Wheel p.24Rim p.24Bearing p.24Seat p.25Stem p.25Hub p.26Sprocket p.27Crank p.28Pedals p.28Small Parts p.29

Complete Bike: Darwin Bike p.4 AJ Line Foot Jam Frame p.5AJ Fork p.5AJ Fork Risers p.5AJ Handlebar p.6 AJ Peg p.6AJ Seat p.6EVO LIne EVO Frame p.6EVO Crank p.7EVO Sprockets p.7EVO Rim p.7EVO Front Hub p.7EVO Pegs p.7EVO Front Wheel p.8PartsFreecoaster Hub p.8X26 Stem p.8X35 Stem p.8CD Sprockets p.8Pivotal Seatpost p.9Hub Bolts p.9Fork Top Cap p.9Removable Brake Stu� p.9Rim Tapes p.9Sweat Band p.9

SaintMartin

Complete Bike: RD Complete p.10Zenta2 Complete p.10Judas Priest Complete p.11Frame RD Frame p.11Zenta2 Frame p.12Judas Priest Frame p.12Russo Frame p.12Bar RD Bar p.13Basement Bar p.13

Amity

Fork RD Fork p.13Jesus Fork p.13 Wheel Zenta Wheel p.14Calamity Wheel p.14Parts Amity Grips p.14Amity Peg Set p.14Bamity Stem p.14BamityTi Bolts p.14Stem Spacer p.15Fsa internal Head Set p.15Head Tube Badge p.15Rt Pivotal SeatStem p.15Zenta Pivotal Saddle p.15Zenta Pivotal Seat Post p.15Zenta Crank p.15Smoked Plastic Pedal Set p.15Zenta Top Cap p.15Zenta Chain p.15Union Black Sprocket p.15Zenta Sprocket p.15

Hollow Stem Bolts p.17 Hub Catharsis Front Hub p.18Requiem Rear Hub p.18Sprocket 7075 V2 Sprocket p.18Hellgate Sprocket p.18Pegs Aluminium Pegs p.18Brackets Bottom Brackets p.19Headset Integrated Headset p.19Stips Rim Strips p.19

Catalog 2012.indd 2 2/27/2012 9:34:55 PM

Contents

MutantBikesBMX- LoboFrame p.30Bar p.30Fork p.30MTB- 24’ FrameEvolution V3 Frame p.31X-Ray V3 Frame p.31MTB- 26’ FrameEvolution V3 Frame p.32X-Ray V3 Frame p.32MTB- HandlebarSmall V3 Handlebar p.33Tall V3 Handlebar p.33PartsSin V2 Stem p.33 Sin Gyro Plate p.34Carbon Hiddenset p.34Slimy Seat p.34Slimy Seat Post p.34Caravela Sprocket p.35Storm Rim p.35Spokes p.35

Shotgun Pro p.43A-Damn Pro p.43A-Damn AD p.43Limited Edition AD p.43ForkArsenic Fork p.44Cirrus Fork p.44Katana Fork p.44Pluma Fork p.44Tanaka Fork p.45HandlebarAnchor V2 Bar p.45Arsenic Bar p.46Pluma Bar p.46Swissmiss Bar p.46WheelAstern Wheel p.46Astral Front Wheel p.47RadioWheel p.47Geisha Light Wheel p.47Reverse Wheel p.47RimBig-O Rim p.47Big-VRim p.48TireMac 1.5 Steel Beaded p.48Mac 2 Street Tan Wall p.48Mac Folding Tires p.49BearingsSealed BB p.49KHE A�x Bush BB p.50SeatExhib Seat p.50Dany Seat p.51Pluma Seat p.51Loyal Seat p.51Watanabe Seat p.51HubAstern Hub p.52Radio Eas Hub p.52Astral Hub p.53Geisha Front Hub p.53Geisha MTB Hub p.53Geisha LightB Hub p.54

BikesMaceto Pro 2012 p36Maceto AD 2012 p.36Maceto ST 2012 p.37Shotgun Pro 2012 p.37Shotgun AD 2012 p.38Shotgun ST 2012 p.38A-Damn Pro 2012 p.39A-Damn AD 2012 p.39A-Damn ST 2012 p.4020TH p.40Root 540 p.41Root 360 p.41Root 180 p.42 FrameMaceto Pro p.42Maceto AD p.42

KHEBikes

Greyhound Adj Hub p.54Greyhound Flat Hub p.55Greyhound Street Hub p.55Greyhound Cass. Hubp.55Greyhound Bolt Hub p.56Reverse Lmt Ed. Hub p.56SprocketRotor Steel Sprocket p.56Rotor Sprocket p.57ChainHal�ink Chain p.57Tanga Chain p.57Tanga Light Chain p.57CrankErlkoenig Crank p.58Hindenburg Alum. p.58Hindenburg Ti Flat p.58PedalAlpha Pedals p.59Construct Pedals p.59Stimulatorz Pedals p.59GripPyramid Grip p.59Pyramid Lock-on Grip p.59PegAeon Pegs p.60Alchemy Pegs p.60SpokesFlexie Spokes p.60KHE DT-Swiss Spokes p.60PartsPrismatic Seatpost p.61Seat Clamp p.61KHE Bikes Pro Brake p.61Puncture Proof p.61Dubz Chainadjuster p.61

Catalog 2012.indd 3 2/27/2012 9:34:55 PM

COMPLETE Bikes

www.stmartinbmx.com

2012 upgrades :new front triangle with straight tubes18.9” top tube12.6” chain stays

100 % cr-mo frame100 % cr-mo fork, 0 mm o�setintegrated headset8” Evo-style handelbar30 mm reach stem152 mm 3-pc tubular cr-mo crank25/9 gear ratiosealed spanish BB set36 holes alloy rimsloose balls front hubTaska U-free sealed bearing freecoaster hub20×1.75 Kenda tiresTektro U-brake, Rush leversPivotal slim plastic seat2012 colors : black – matt whiteweight : 10.9 kg / 24 lbs

Top tube : 18.9“Chain stay : 12,6” slammedHead angle : 75°Seat angle : 71°BB height : 11,8”

FEATURES

FRAME GEOMETRY

SPECSFrame St-Martin Darwin, full 4130 Cr-Mo, integrated head tube, Spanish BB, removable gyro tabs, 5mm laser cut dropouts,weld-on seat clamp Fork St-Martin full 4130 Cr-Mo, 0mm o�set, long steer tube (180 mm), M25 threaded top cap with big hole, 5 mm laser cut dropouts Head set Integrated, Campagnolo style sealed bearings + 6 spacers (4 mm each) Stem Short frontload, 30 mm reach Handlebar St-Martin 2 pcs, raise 8”, width 24.5”, low crossbar Grips Kraton, 130 mm, no �anges, with plastic bar ends Crank Tubular Cr-Mo 152 mm arms, 8 splines axle BB set Spanish BB sealed bearings Sprocket 25T, 5 mm thick alloy Chain KMC Z410, 1/2”x1/8” Pedals Wellgo plastic, Cr-Mo axle Rims Lightweight alloy, single wall, 36 holes, machined sidewalls Front Hub 36 holes, low �anges, loose balls, 3/8” Cr-Mo axle Rear Hub Taska U-free freecoaster, sealed bearings, with 9T driver, 36 holes, 3/8” Cr-Mo axle Spokes assembly Front : 1-cross, rear : 3-crossTires Kenda Kontact 20×1.75” Pegs Knurling, 38 mm, 110 mm, alloy, rounded end, 4 pcs Seat post Pivotal 300 mm Seat Pivotal slim, plastic Levers Rush 2 �ngers U-brakes Tektro Detangler Standard detangler, 2-in-1 short cables

Darwin Bike

- 4 -

Catalog 2012.indd 4 2/27/2012 9:35:05 PM

AJ Line

www.stmartinbmx.com

Geometry100 % Sanko cr-mo tubingtop tube : 18.7” or 19.4”chainstays : 12.6”head angle : 75°seat angle : 71°BB height : 12.8”1.84 kg / 4.1 lbs

Specsthick tubesshort head tube, Campagnolo standardhigh BB position, Spanish standardbulged seat stays near seat tubenarrow rear triangle : seat stays and chain stays are weldedinside dropouts to reduce overall width4 mm dropouts for 3/8” axleintegrated chain tensioners inside dropoutsinternal seat clamp in top tube, Strawberry patentbrakeless only2012 colors : matt black – smoked chrome

Foot Jam FrameAlex Jumelin signature frame. Ultra-street looking

AJ Fork

AJ Fork Risers

100 % heat treated Cr-Mo28.6 mm butted legs0° degree o�setvery narrow lower legssmall 5mm dropoutsintegrated crown cone for integrated headset onlyM25 top cap, 7075-T6 alloy (17 grams / 0.6 lb), available separatelybrakeless or with welded low-stack brake pivots180 mm long steer tubeV-cut steer tube for optimized cable route2 risers included : + 7 mm or + 14mm820 grams / 29.3 oz 2012 colors : black – smoked chrome

put one of them under your lower headset bearing to raise the front end of your bikemore space between front tire and frame downtube2 sizes : 7 mm and 14 mm7 mm model modi�es the head angle of minus 0.5° (from 75.0° to 74.5° for example)14 mm model modi�es the head angle of minus 1.0° (from 75,0° to 74,0° for example)for intregrated headset onlypermet de relever l’avant de votre vélo

-5 -

Catalog 2012.indd 5 2/27/2012 9:35:20 PM

AJ Line

EVO Line

www.stmartinbmx.com

2-pc street-style handlebar8.75” high27.2: wide2° back sweep1° up sweep100 % heat treated strong and thick Cr-Mo19 mm crossbar3 saw lines each side for a clean cut858 grams / 30.6 oz2012 colors : black – smoked chrome

AJ Handlebar

AJ Peg

AJ Seat

Alex Jumelin’s idea : very short pegs45 mm long6061-T6 alloy38 mm O.D.rounded endknurling surface45 grams / 1.6 oz (pc) 2012 colors : black – bronze

Pivotal seatslim pro�leslim rear bumperskevlar coverAJ embroded logo246 grams / 8.8 oz 2012 color : black

Specsthick tubesshorter seat tubelonger chainstaysCampagnolo standard head tubeSpanish bottom bracketnarrow rear triangle : seat stays and chain stays arewelded inside dropouts to reduce overall width4 mm dropouts for 3/8” axleintegrated chain tensioners inside dropoutsholes for removable brake/gyro parts, sold separatelyno weld-on seat clamp2012 colors : ED-black – bronze clear coated

Geometry100 % Sanko cr-mo tubingtop tube : 18.5” or 19.2”chainstays : 12.1”head angle : 75°seat angle : 71°BB height : 12.0”1.84 kg / 4.1 lbs

Evo FrameDouble diamond frame with regular BB position

-6 -

Catalog 2012.indd 6 2/27/2012 9:35:43 PM

EVO Line

www.stmartinbmx.com

strong tubular �atland 2.5-pc crank19 mm heat treated cr-mo hollow axle150 mm heat treated cr-mo round armspin drive for micro sprocketssmooth edges at axle area, with �ush bolt on left sideright side drive onlyremoval tool included718 grams / 25.6 oz 2012 color : black

Evo Crank 2.5 pcs Evo Crank Splined

Evo Sprockets

strong tubular �atland 3-pc crankfor splined sprocket only (no pin drive)19 mm heat treated cr-mo hollow axle155 mm heat treated cr-mo armsvery low pro�le, ankle-friendly arms765 grams / 27.3 oz 2012 colors : black – smoked chrome

8-spokes sprocket7075-T6 alloy5 mm thicksplined central holeno need pin bolt, �ts most 3-pc cranks with long splined area20T = 46 grams / 1.6 oz24T = 59 grams / 2.1 oz2012 color : black

brakeless welded rim36 holesrounded pro�lesmooth, does not hurt handsSt-Martin white nylon rim tape included (also available separately)439 grams / 15.6 oz2012 colors : black

Evo Rim

36 holes7075-T6 alloy thick female axle6061-T6 alloy bi-taper bodythick �anges3/8� x 24 tpi cr-mo CNC hex boltshardware available separately235 grams / 8.4 oz including Cr-Mo bolts2012 color : black

Evo Front Hub

Evo Pegs regular pegs105 mm long6061-T6 alloy38 mm O.D.rounded endknurling surface82 grams / 2.9 oz (pc) 2012 colors : black – bronze

- 7 -

Catalog 2012.indd 7 2/27/2012 9:35:52 PM

EVO Line

PARTS

www.stmartinbmx.com

lightweight brakeless front wheelSt-Martin Evo welded rimSt-Martin Evo front hub36 strong stainless steel spokes, 1 cross840 grams / 1.85 lbs2012 color : all black

Evo Front Wheel

Freecoaster Hub this freecoaster hub comes as original equipment on the Darwin complete bikeuses KHE internal system36 holes6061-T6 alloy body3/8” Cr-Mo female axlesealed bearings1 pc Cr-Mo driver, 9T575 grams / 20.5 oz2012 colors : black

6061-T6 alloy26 mm reach4 hollow bolts (25 mm long)wedge clamp solution170 grams / 6.0 oz reusable packing : St-Martin sweat-band (also available separately)2012 color : black

X26 Stem

X35 Stem6061-T6 alloy35 mm reach4 hollow bolts (25 mm long)wedge clamp solution182 grams / 6.5 oz reusable packing : St-Martin sweat-band (also available separately)2012 color : black

Compact Disc Sprockets

compact disc strong sprocket7075-T6 alloy3 mm thick22 mm hole + 19 mm adaptor 18T = 35 grams / 1.2 oz21T = 46 grams / 1.6 oz24T = 63 grams / 2.2 oz2012 color : black

Note: X35 StemSame look as X26, just 9 mm longer

X26 Stem

-8-

Catalog 2012.indd 8 2/27/2012 9:36:06 PM

PARTS

www.stmartinbmx.com

Pivotal Seatpost

for Pivotal seats only6061-T6 alloy1”/25.4 mm O.D.330 mm long235 grams / 8.4 oz minimal packing for waste reduction2012 colors : black – silver

Hub Bolts

Removable Brake Stuff

for female hub3/8” x 24 tpi, 30 mm longCNC from cr-mo material, for great strengthfor 17 mm socket wrenchsold as 2 pieces

complete set for 2012 Evo frame : pivots, stoppers, gyro tabscompatible with any 2009-2012 St-Martin framescompatible with many frames on the market

vinyl coated plastic20 mm widesold as pair

Rim Tapes

Compatible with AJ forkcompatible with any fork using M25 thread7075-T6 alloyFor M8 allen key17 grams / 0.6 lb

Fork Top Cap

embroded St-Martin logo10 cm / 4” long

Sweat Band

-9 -

Catalog 2012.indd 9 2/27/2012 9:36:20 PM

COMPLETE

Zenta2 Complete

The RD Complete is the culmination of Amity and the past 3 years in BMX.It’s our top end whip and boasts a very high speci�cation, similar to a full custom build. The frame, forks and bars are all based on Cam’s signature parts; these are mixed with other branded parts such as Odyssey rims, Duo tyres and duo pedals. The RD complete looks, feels and performs every bit a £1000+ bike.

RD Complete Frame Spec: Full 4130, double-butted frame. Heat treated head tube, BB & dropouts. 21.4 or 20.8” TT, 13.75” back end, 10” stand over, 75 degree head tube angle 70 degree seat tube, Spanish BB, internal machined head-tube, integrated seat clamp, tapered seat & chain stay, CNC machined micro drop outs designed for 38 mm diameter pegs, removable brake hardware, supplied with gyro tabs.

RD geometry: Full 4130 PG Tube, 30” wide 8.8” high 2 degree rise, 12 degree back sweep. Forks: RD Geometry, double butted 4130 with taper & female fully enclosed CNC drop outs, internal thread for top cap. Wheels: Calamity internals, 6061 cnc machined shell, female zbolts, 9t 1 piece cassette driver, laser etched amity logo, suitable to run pegs, Odyssey quadrant rims, brass nipples. Tyres: Duo stunner black/red/skin wall. Cranks: 4130 heat treated 48T 170mm �nished in raw, 19mm hollow axle, cnc machined 6061 spacer kit, sealed Spanish BB. Sprocket: 6061 CNC machined. Pedals: Duo. Seat: Pivotal fat RT signature design, rubberised/Kevlar cover. Post: Pivotal with laser etched amity logo. Brake: Amity U-brake. Chain: PYC Hollow. Stem: ITC Forged alloy with amity logo. Top Cap: Amity 6061 �ush �t cnc 6061. Grips: Amity soft krayton rubber. Weight: 23.5lbs. Headset: Internal sealed FSA. black/raw. chrome/skinwall. phosphate/redwall.

"From the very �rst glance it’s obvious that this bike is very well considered - even before looking at the spec, the eye-catching chrome �nish and complementary anodized red components elevate this complete way above most similarly priced competitors.Aesthetically the Zenta is great. But how does it ride? It rides great, that’s how it rides. We took the bike to the trails and the skatepark and everyone who rode it agreed that it felt real nice. It’s lightweight without compromising stability and the short backend and high bars make it remarkably responsive. Upon closer inspection, the quality of ride can be attributed to the super high speci�cation to which this bike is �nished." Words by Steve Bancroft Ride UK

ZANTA2 Complete Frame Spec:Full 4130 chromo frame:: 20.5" / 21" TT :: 13.75 chain stays :: 71° seat tube :: 75° cnc head tube with removable gyro tabs :: integral seat clamp :: removable brake hardware :: 4130 taper forks with micro drop outs :: internal sealed headset :: amity ITC front load stem (logo) :: 29"x 8.6" 4130 bars :: sealed Spanish BB :: 8t amity 175 mm chromo 3 piece crank set :: 25t sprocket :: duo plastic pedals :: amity sealed rear cassette hub 9t 36h (logo) :: amity front hub 32h (logo) :: double wall 6061 front & rear amity rims :: Duo Stunner 2.2” tyres/:: kmc chain :: amity pivotal RT seat :: amity pivotal seat post :: amity ‘U’ brake :: Amity soft kraton grips :: 24.5 lbs

www.amitybikeco.com

RD Complete

-10 -

Catalog 2012.indd 10 2/27/2012 9:36:36 PM

COMPLETE

FRAME

TEntry level complete boasts many features found on far more expensive bikes, such as Duo tyres, Duo pedals, 3-piece cranks, taper forks & sealed bearings. With what seems like ever increasing retail bike prices pushing would-be riders away, we wanted this complete to be aimed at getting people into the sport of BMX. Judas Priest is on-point,with �ne attention to detail and the geometry and many parts found on far more expensive whips. Simply put, Judas Priest is a PERFECT entry level bike.

Judas Priest Frame Spec: 1020 Hi Tensile, 20.5” TT, 13.75 back end, 9” stand over, 75 ° head tube, holes for Gyro tabs, internal CNC head tube, Spanish BB, integrated seat clamp, tiny 14 mm drop outs (suitable for pegs *not supplied).

Bars: PG Tubing, Basement Bar Geometry 28” wide 8.6” high 13 °backsweep, 2° upsweep. Forks: Taper forks. Wheels: Sealed loose ball rear cassette hub (9t driver) 36 hole alex rim, loose ball front hub 32 hole alex rim. Tyres: Duo stunner black/red/skin wall. Cranks: 8T 3-piece 4130 pinch bolt, 19mm axle. Sprocket: Alloy 25T. Pedals: Duo. Seat: KHE Moulded plastic seat with integrated alloy post. Brake: Amity U-brake. Chain: KMC Chrome. Stem: ITC Forged alloy with amity logo. Grips: Amity soft krayton rubber. Headset: Neco. Weight: 24.5lbs.

A progressive street frame designed by one of the most stylish and in�uential riders to ever come from the UK. rd features a steep head angle (75.5deg) for nose manuals and a laid back seat tube (70deg). The laid back seat tube gives the feeling of a smaller frame hence a 20.8 feels like a 20.4 and a 21.4 feels more like a 21". That said, once you are sized up, the frame has a real roomy feel. The stand over at 9" is low but not scooterish & the bb is high for manuals. The tubes are all 1mm or more thick which makes them nice and dent resistant. The attention to detail is real �ne, the look is as simple as it comes. Cam didn’t even want to spoil the lines with a seat clamp so you’re gonna need a wedge post. We don’t do stickers on our frames but we’ll send you some that Cam designed, you can put them somewhere. Well what did you expect? Yeah i know, we’re pretty stoked too...

20.8 / 21.4 TT option with 13.5/13.75 chain stays respectively :: steep 75.5 degree ht angle :: laid back 70 degree st angle :: full 4130 seamless tubing :: 5th butted down tube :: all other tubes double butted :: taper seat & chain stays :: full cnc head tube with amity cnc logo :: 9" centre bb-tt (standover) :: 11.75 bb height :: tiny little drop outs (but you can still run a standard 38 peg) :: removable gyro and brake hardware :: Spanish bb :: no seat clamp :: internal gussets :: clearance for up to 2.3" tyre :: 4.8 lbs :: Colours rawdawg (untreated) :: chronic green :: swisher brown (�at) :: black (�at)

www.amitybikeco.com

Judas Priest Complete

RD Frame

-11 -

Catalog 2012.indd 11 2/27/2012 9:36:48 PM

FRAME

Full 4130 chromo frame with double butted DT :: 20.5" / 21" TT :: 13.75 chain stays :: 71° seat tube :: 75° cnc headtube with removable gyro tabs :: integral seat clamp :: removable brake hardware :: tapered seat stays

20.75 / 21 tt, 13.75 chain stay, 75° head angle, 71° st angle, full 4130 seamless tubing, 5th butted down tube, all other tubes double butted, taper seat & chain stays, full cnc head tube with judas priest cnc logo, 9” stand over, 11.75 bb height, tiny cnc 14mm drop outs (can still run 38 mm peg), removable gyro & brake hardware, spanish bb, internal seat clamp, internal gussets, clearance for 2.3 tyre, 5lbs. matt black. raw (not coated).

Fashionably sculpted with a low stand-over height (but not too low), russo is lean, clean & mean at just 4.1 lbs. Seamless fully post weld heat-treated 4130 with 5th butted TT & DT (internal gussets) and double butted on all other tubing. This frame caters for park & trails riders who prefer a lower stand over height and �owing look.

100% thermal stress treatment after welding :: 20.6" /21" tt, 13.75" c/s, 9" s/t, 75° head angle, 71° s/t angle :: 4130 seamless cnc machined tubing :: pulse tig welded by people on precision jigs means each one is individual :: quad butted d/t :: all other tubes double butted :: cnc machined internal head tube :: cnc machined spanish bb :: lazer cut, cnc machined ‘taper lock’ micro drop-outs :: skull/wings lazer bridge :: removable tabs, guides & pivots :: 4.1 lbs Colours: �at amaranth red :: �at dark amethyst :: Gloss Powder Black :: Matt Powder Black :: Envy Matt Green :: Maroon Metallic Gloss

TaperLock TM: a revolutionary new system that literally locks the rear wheel in position by simply doing up nuts/bolts �nger tight. For obvious reasons we still advise you turn a spanner on them afterwards, but this system really will stop those annoying rear wheel movements resulting from not so perfect landings and hang ups. we are the �rst company to o�er this system on a complete bike, lock & load.

www.amitybikeco.com

Zenta2 Frame

Judas Priest Frame

Russo Frame

-12 -

Catalog 2012.indd 12 2/27/2012 9:36:53 PM

BAR

FORK

100% thermal stress treatment after welding :: 11-butted 4130 cromo :: 8.6" rise :: 13° back sweep :: 2° rise :: 29" wide :: these are tall & wide & make youride big :: 750 g 1.65 lbs (chrome) Colours matt black :: chrome :: gunmetalgloss :: maroon gloss :: amaranth red :: green :: brown

Designed by Cam himself, these bars are BIG. A massive 30" wide by 8.8" high. Finished with a really thin cross bar, for a super-clean look.

seamless 4130 :: 11-butted :: post weld full heat treated :: 30" wide :: 8.8" height :: 11 deg backsweep :: 1 deg upsweep :: 16mm cross bar :: pinstripe rasta rd sticker :: 1.81 lbsColours gunmetal gloss :: chrome :: matt black :: green :: ED black :: brown

double butted, tapered, dome ended, cnc female (enclosed) drop outs (heat treated), 2.38 lbs. matt black. chrome.

hi-grade: triple butted, �uted, tapered, dome ended, fully post-weld heat treated, cnc female (enclosed) drop outs, 1 piece cnc steerer. 2.14 lbs. matt black. chrome

At just 1lb 15oz Jesus forks are very light. But don’t let the weight deceive you because Jesus forks are incredibly strong thanks to the use of�uted tubing. Fluted tubing �ows the material in axis the tube is required to be sti�. In the Jesus case, it’s the bending moment between theaxle and the head set. Think about rolling up some corrugated card with the corrugations running the length of your rolled tube. That is howJesus forks work; the corrugations are on the inside of the tube sweet eh?

100% thermal stress treatment after welding :: full 4130 :: triple butted :: internally �uted :: tapered :: cnc machined 1-piece steer tube :: micro 4mm drop-outs (su�cient to run a 38 mm 1.5" peg) :: 6061 cnc amity top nut included :: 1lb 15oz

www.amitybikeco.com

Rd Bar

Basement Bar

Rd Fork

Jesus Fork

-13 -

Catalog 2012.indd 13 2/27/2012 9:37:09 PM

WHEEL

Calamity Wheel

PARTS

Front Wheel

Rear Wheel

7075 T6 double wall welded rim :: 6061 T6 CNC machined & milled hub :: 3 x double paw 9T driver with twin sealed roller bearings :: Hardened 4130 Female Axle & 10mm hardened steel bolts with 14mm spacers (for 14mm drop outs) :: Fresh solid sound, it's loud but not painful, 4 roller bearings in total; so smooth & super fast :: 1145g/2.52 lbs.

7075 T6 double wall welded rim :: 6061 T6 CNC machined & milled hub :: Hardened 4130 Female Axle & 10 mm hardened steel bolts :: 2 quality sealed roller bearings so smooth & super fast :: 950g/2.09 lbs

6061 t6 alloy :: cnc from billet :: �ush �t top cap for amity forks :: spacer washer also supplied to �t all other top caps :: complete with 6 x amity ti bolts :: 239 grams / 8.4 Oz

Bamity Stem Zenta Stem

Both pegs 10 mm holes

Amity Grips Amity Peg Set

Bamity Ti Bolts

www.amitybikeco.com

Zenta Wheel

-14 -

Catalog 2012.indd 14 2/27/2012 9:37:23 PM

PARTS

7075 t6 extra hard alloy :: full 3-level cnc :: hard anodised in matt black ::

Union Black Sprocket Zenta Sprocket

Zenta alloy chain ring matt black

Rt Pivotal Seat

Stem Spacer

www.amitybikeco.com

Limited edition solid gold9 ct solid Gold : : hall marked & engraved with <Amity>

Head Tube Badge

Zenta Pivotal Seat PostZenta Pivotal Saddle

Zenta Chain 72 Link

translucent smoked grey body :: cromo axle :: looseball bearing :: 372g

Welgo Smoked Plastic Pedal Set Zenta Top Cap

all kevlar rubber/kevlar

matt black :: 3-piece :: Full 4130 :: 48 t spline :: 19mm heat treated axle :: 175mm cranks :: inside lazer etch :: with Spanish BB :: black :: 921g 2lbs. RHD / LHD compatible. raw / black / chrome.

Zenta Crank

Fsa Internal Head Set

-15 -

Catalog 2012.indd 15 2/27/2012 9:37:26 PM

BAR

GRIPS

BARENDS

- Joe Riley signature design- 4130 cr-mo fully heat treated- 11 butted- 19mm Crossbar- R: 8.25” W: 28.5” SB: 12° SU: 1°- weight: 23.5oz- Charcoal Black

- Hell on Earth X Coalition design Series Two- Low Flange- Super soft Kraten- Coalition Nylon Barends- Charcoal Black or Blood Red

- 11 butted 4130 chromoly.- Crossbar drilled for weight savings- Fully Heat Treated.- Available in the following sizes:- 8.25 ” rise | 12 degree back sweep 1 degree up sweep | 29.5” wide.- David Grant Signature Size- 8.5 ” rise | 12 degree back sweep 1 degree up sweep | 29.5 ” wide.- Comes with two di�erent stickers that cover the entire cross bar- Available in Matte Black (charcoal) and Blood Red

- Ribbed grips with Coalition log stretched diagonally across

- Unique design- Light weight nylon- Fits nearly all handlebars- Charcoal Black or Blood Red

Holycross Bar

Joe Riley Bar

Hoe Grip Series 2(Hell On Earth)

Team Grip

www.coalitionbmx.com

Nylon Barends

-16 -

Catalog 2012.indd 16 2/27/2012 9:37:58 PM

SEAT

STEM


- 6061 CNC machined aluminum body and caps.- Split cap design.- Ovalized rear clamp bolt holes.- New rounded rear body.- Material cut outs to maximize strength and save weight.- Available in Matte Black (Charcoal) and Red- Weighs: 9.5 oz.

World Wide Pivotal Seat

Conduit Pivotal Seat

- Split seat design with clothing brand Hell on Earth.- Dual cover seat with screen printed top.- New rounded rear body- Utilizes Patented Pivotal Technology.

Hand Of Death Pivotal Seat

“The Machinist” Pivotal Seat

Hell On Earth Pivotal Seat

- Split seat with clothing brand Hell on Earth.- Dual cover seat with screen printed top.- Utilizes Patented Pivotal Technology

Ef�gy Seat Post

- Printed Coalition Cog Logo- Available in a Mid or Phat padding- Utilizes Patented Pivotal Technology

- Split seat design with clothing brand Hell on Earth.- Dual cover seat with screen printed top.- New rounded rear body- Utilizes Patented Pivotal Technology.

- Dual cover seat with screen printed top. - Utilizes Patented Pivotal Technology.

-1pc Forged 6061 Alloy Compatible with Pivotal Seats only- Super soft Kraten- 75mm Length- Charcoal Black or Red- Weighs 2.3 oz

Povah Topload Stem

Povah Front Load Stem

- Top load version of the Povah front load design- Recessed cap bolt holes- New rounded rear body- 6061 CNC machined aluminum body and caps- Split cap design.- Ovalized rear clamp bolt holes.- Available in Matte Black (Charcoal) and Red- Weighs: 9.5 oz.

Hollow Stem Bolts

- M8 x 25 mm Cr-mo- Compatible with most of the stems on the market

-17 -

Catalog 2012.indd 17 2/27/2012 9:38:13 PM

HUB

SPROCKET

PEGS


Catharsis Front Hub

- 36H 6061 alloy shell with slanted �anges- 7075 alloy axle or Cr-mo axle- 3/8” Cr-mo Hex Bolt- 7.1oz (alloy axle)- 8.5 oz (cr-mo axle)- Charcoal Black or Red- *Peg use not recommended for Alloy Axle version

- 36H 6061 alloy shell- 14mm cr-mo female or standard axle option- 3/8” Cr-mo Hex Bolt- RHD or LHD 9t driver options- 14 oz (female version)- 15.8 oz (standard version)- Charcoal Black or Red-*Peg use not recommended for Female Axle

- 6061 aluminum with internal and external machining.- Designed speci�cally for skate park and light street use.- Fits 3/8” or 14mm axles.- Hard anodized coating (uses mil-a-8625 type 3 hard coating per military specs).- Includes hat washer.- Sold individually only.- Weighs 5.7 oz. each.

Aluminum Pegs

- Shawn McIntosh signature design- Machined 6061 alloy- Unique design with special machining- 25t, 28t, 30t- weight: 1.5oz (25t)- Charcoal Black or Red

- Completely redesigned- 7075 T6 Aluminum.- Revised cut-outs to save weight.- 5 bolt hole pattern.- Fits all spindles 22.2mm (7/8”) and smaller- Sizes 22T, 23T, 25T, and 28T- Available in Matte Black (charcoal) and Teal.

Requiem Rear Hub

Hellgate Sprocket

7075 V2 Sprocket

-18 -

Catalog 2012.indd 18 2/27/2012 9:38:24 PM

BRACKETS

HEADSET

STIPS


Bottom Brackets

- Available in Spanish or Mid Size- 19mm or 22.2mm IDs- Additional spacer washers included- Charcoal Black or Red

- Special top cover design- 45×45 bearing- Fits frames with a 45×45 integrated head tube- Charcoal Black or Red

Integrated Headset

- Nylon rim strips- �ts 20” rims

Rim Strips

-19 -

Catalog 2012.indd 19 2/27/2012 9:38:30 PM

GRANDE EDITION Frame

www.superstarbmx.com

Geometrytop tube : 21.4”chainstays : 13.4” – 14.0”head angle : 75°seat angle : 70°BB height : 11.6”2.20 kg / 4.85 lbs

Dropouts types2 choices :- for 3/8” axle : 5 mm CNC dropouts,with integrated chain tensioners inside dropouts- for 14 mm axle : 7 mm investment cast hollow dropouts, with integrated chain tensioners through dropouts

Geometrytop tube : 21.4”chainstays : 13.75”: – 14.4”head angle : 74.5°seat angle : 71°BB height : 11.6”2.20 kg / 4.85 lbs

Dropouts types2 choices :- for 3/8” axle : 5 mm CNC dropouts, with integrated chain tensioners inside dropouts- for 14 mm axle : 7 mm investment cast hollow dropouts, with integrated chain tensioners through dropouts

Long Watson frame, 3/8 or 14 mm dropouts, confortable head angle, longer rear triangle.

Complete specsstrong 100 % Sanko cr-mo tubinggusset under top tubebulged seat stays near seat tubetapered seat stays near dropouts, round tips19 mm D-shape chain stays (dent free)Campagnolo-style internal head tube (heat treated)Spanish bottom bracket (heat treated)completely removable brake/gyro partsinternal seat clamp in top tube, Strawberry patentnew engraved logo on head tube

Do not use dual lower cable with removable cable stops.Only 2-in-1 regular detangler cable

2012 colors : ED-black + smoked chrome

Complete specstrails oriented geometry, with longer seat tube(1 cm higher frame)100 % Sanko cr-mo tubingstrong tubesbulged seat stays near seat tubetapered seat stays near dropouts, round tips19 mm D-shape chain stays (dent free)Campagnolo-style internal head tube (heat treated)Spanish bottom bracket (heat treated)completely removable brake/gyro partsinternal seat clamp in top tube, Strawberry patentnew engraved logo on head tube



Long Carlton frame, 3/8 or 14 mm dropouts, light, responsive, tech.

Carlton Grande Edition Frame

Watson Grande Edition Frame

Something new from Superstar : a complete line of longer, taller and wider products for people looking for easy, roomy and yet responsive riding sensations.

-20-

Catalog 2012.indd 20 2/27/2012 9:38:36 PM

GRANDE EDITION Frame

GRANDE EDITION Fork

GRANDE EDITION Handlebar


Geometrytop tube : 21.3”chainstays : 13.2“ – 13.7”head angle : 75°seat angle : 69°BB height : 11.6“2.20 kg / 4.85 lbs

New for 2012back to 69° seat angle like the originalCooper frame in 2009

Cooper frame with longer top tube, safe to ride, perfect weight/ strength balance.

Complete specs100 % Sanko cr-mo strong tubinggusset under top tubebulged seat stays near seat tubetapered seat stays near dropouts, round tips19 mm D-shape chain stays (dent free)7 mm investment cast hollow dropouts, peg-sized, for 14 mm axleintegrated chain tensioners through dropoutsCampagnolo-style internal head tube (heat treated)Spanish bottom bracket (heat treated)completely removable brake/gyro partslow weld-on seat clamp with replaceable bolt and nutnew engraved logo on head tube



o�set, thick dropouts, full heat treated, butted, tapered and �utted tubes100 % heat treated Cr-Mo1 pc CNC + butted + �utted head tube, 165 mm longintegrated crown cone for integrated headset onlytriple butted + �utted + taper 31.8 mm to 22 mm legsmedium 5 mm dropouts, for 3/8� axle35 mm o�setM25 top cap (18 grams / 0.6 lb), available separately962 grams / 2.12 lbs

painted forks are ED-blacked before painting : no corrosion inside tubes


2 sizes :8.8” : 29” wide, 14° backsweep, 2° upsweep9.0” : 29.5” wide, 13° backsweep, 3° upsweep

100 % heat treated multibutted Cr-Mo19 mm crossbar4 saw lines each side for a clean cutengraved size on one side873 grams / 31 oz (size 8.8”)


35 mm o�set, thick dropouts, full heat treated, butted,tapered and �utted tubes

Taller and wider than ever, multibutted, heat treated, confortable.

Cooper Grande Edition Frame

-21 -

Catalog 2012.indd 21 2/27/2012 9:38:42 PM

FRAME


Geometrytop tube : 20.3”, 20.6”, 21”(see Carlton Grandé Edition for longer top tube)chainstays : 13.4” – 13.9”head angle : 75°seat angle : 70°BB height : 11.6”2.20 kg / 4.85 lbs

Dropouts typesfor 14 mm axle : 7 mm investment cast hollowdropouts, with integrated chain tensionersthrough dropouts

Pure street frame, light, responsive, tech.

Complete specsstrong 100 % Sanko cr-mo tubinggusset under top tubebulged seat stays near seat tubetapered seat stays near dropouts, round tips19 mm D-shape chain stays (dent free)Campagnolo-style internal head tube (heat treated)Spanish bottom bracket (heat treated)completely removable brake/gyro partsinternal seat clamp in top tube, Strawberry patentnew engraved logo on head tube



Geometrytop tube : 20.6” or 21”(see Watson Grandé Edition for longer top tube)chainstays : 13.75” – 14.4”head angle : 74.5°seat angle : 71°BB height : 11.6”2.20 kg / 4.85 lbs

Dropouts typesfor 14 mm axle : 7 mm investment cast hollowdropouts, with integrated chain tensionersthrough dropouts

Trails-friendly frame, confortable head angle,longer rear triangle

Complete specstrails oriented geometry, with longer seat tube(1 cm higher frame)100 % Sanko cr-mo tubingstrong tubesbulged seat stays near seat tubetapered seat stays near dropouts, round tips19 mm D-shape chain stays (dent free)Campagnolo-style internal head tube (heat treated)Spanish bottom bracket (heat treated)completely removable brake/gyro partsinternal seat clamp in top tube, Strawberry patentnew engraved logo on head tube



Carlton Frame

Watson Frame

-22 -

Catalog 2012.indd 22 2/27/2012 9:38:48 PM

FRAME

PARTS - Handlebar

PARTS - Fork


Geometrytop tube : 20.6” or 21” (see Cooper Grandé Edition for longer top tube)chainstays : 13.2” – 13.7”head angle : 75°seat angle : 69°BB height : 11.6”2.20 kg / 4.85 lbs

New for 2012back to 69° seat angle like the originalCooper frame in 2009

Street-and-more frame, safe to ride, perfect weight/ strength balance.

Complete specs100 % Sanko cr-mo strong tubinggusset under top tubebulged seat stays near seat tubetapered seat stays near dropouts, round tips19 mm D-shape chain stays (dent free)7 mm investment cast hollow dropouts, peg-sized, for 14 mm axleintegrated chain tensioners through dropoutsCampagnolo-style internal head tube (heat treated)Spanish bottom bracket (heat treated)completely removable brake/gyro partslow weld-on seat clamp with replaceable bolt and nutnew engraved logo on head tube



3 sizes :8.0”, 28.5” wide8.3”, 29” wide8.6”, 29” wide

100 % heat treated multibutted Cr-Mo19 mm crossbar13° backsweep2° upsweep4 saw lines each side for a clean cutengraved size on one side872 grams / 31 oz (size 8.6”)


Sweet Sweep Handlebar

Neutral Fork

A classic among the Superstar product line,multibutted, head treated, confortable.

100 % heat treated Cr-Mo1 pc CNC + butted + �utted head tube, 165 mm longintegrated crown cone for integrated headset onlytriple butted + �utted + taper 31.8 mm to 22 mmlegs small 4 mm dropouts, for 3/8” axle25 mm o�setM25 top cap (18 grams / 0.6 lb), available separately904 grams / 1.99 lbs

painted forks are ED-blacked before painting : no corrosion inside tubes


25 mm o�set, thin dropouts, full heat treated,butted, taperd and �uttedt ubes.

Cooper Frame

-23 -

Catalog 2012.indd 23 2/27/2012 9:38:54 PM

PARTS - Wheel

PARTS - Rim

PARTS - Bearing


Spinning female hub, strong rim, reliable spokes.

Spinning cassette hub, 9T RHD, strong rim, reliable spokes.lightweight brakeless rear wheel (brake compatible)Superstar Duty Welded rimSuperstar Overdrive cassette hub 9T RHD36 strong stainless steel spokes, 3 cross1099 grams / 2.42 lbs

2012 colors : all black, black rim + silver hub, black rim + gold hub

Brake or brakeless use, welded, strong.round brakeless rimwelded jointsidewall are high enough to use brake36 holesSuperstar nylon rim tape included (also available separately)439 grams / 15.7 oz

2012 colors : black, silver, gold

HeadsetSo low stack, it is almost invisible.

Spanish BB SetCan’t be more basic than that one.

Spinning cassette hub, 9T RHD, strong rim, reliable spokes.Overdrive Duty Rear Wheel

Brake or brakeless use, welded, strong.Duty Rim Welded

Overdrive Duty Front Wheel

Spinning female hub, strong rim, reliable spokes.lightweight brakeless front wheelSuperstar Duty Welded rimSuperstar Overdrive front hub36 strong stainless steel spokes, 3 cross908 grams / 2.00 lbs

2012 colors : all black, black rim + silver hub, black rim + gold hub

Overdrive Front & Rear Wheel

So low stack, it is almost invisible.low stack cap : 4 mm lower than the average capCompagnolo compatible58 grams / 2.1 oz

2012 colors : black, silver, gold2 sizes : 19 mm axle and 22 mm axlewith spacer, cones and washers138 grams / 4.9 oz (19 mm)119 grams / 4.2 oz (22 mm)

2012 color : black

-24 -

Catalog 2012.indd 24 2/27/2012 9:39:07 PM

PARTS - Seat

PARTS - Stem


Frontload, 49 mm or 53 mm and plenty of small *Superstar details*.

F9 Stem

4 bolts, 4 holes inside.Stem Bolts

Same as competition, but with*Superstar* logo.

Pivotal Seatpost

Thin, aerodynamic, fast, kevlar-covered.Easy Seat

Top load, 49 mm and plenty of small*Superstar details*.

Edge 9 Stem

Frontload, 49 mm or 53 mmand plenty of small « Superstar details ».6061-T6 alloy49 mm or 53 mm extensiondissymetrical bar clamps for smooth top surfacefork cap hole for hidden cap from sideview4 hollow bolts266 grams / 9.5 oz

reusable packing : Superstar sweat-band(also available separately)


6061-T6 alloy49 mm extensiondissymetrical bar clamps for smooth front surfacefork cap hole for hidden cap from sideview4 hollow bolts275 grams / 9.8 oz

reusable packing : Superstar sweat-band(also available separately)


M8 x 25 mmcompatible with most of the stems on the market4 bolt pack11 grams / 0.4 oz each

1-pc forged seatpost135 mm long94 grams / 3.3 oz 2012 color : black, silver, gold

Thin, aerodynamic, fast, kevlar-covered.Pivotal slim seatkevlar cover with embossed logo248 grams / 8.8 oz

2012 color : black

Thin, aerodynamic, fast, kevlar-coveredand seatpost included.1-pc seat/seatpost combokevlar cover with embossed logo14 cm / 5.5” seatpost length245 grams / 8.7 oz

2012 color : black

Thin, aerodynamic, fast, kevlar-coveredand seatpost included.

Easy Seat Combo

-25 -

Catalog 2012.indd 25 2/27/2012 9:39:20 PM

PARTS - Hub


Big nuts or small pegs, up to you.Very usefull.

Micropegs

7075-T6, 3 Styles, �ts most hubs.Hub Guards

Female axle, sealed bearings, lightweight.Overdrive Front Hub Female axle, sealed bearings, lightweight.

street proof hubpegs compatible36 holesheat treated Cr-Mo female axle6061-T6 alloy body with die-cut star logothick �anges3/8” x 24 tpi boltsall replacement hardware available17 mm hex bolts available as spare partsultra light 7075-T6 alloy axle available (save 45 grams / 1.6 oz)245 grams / 8.7 oz including Cr-Mo bolts


New driver system, 4 wide pawls with dual spring, light and reliable.new thinner hubshell36 holespegs compatible3/8” and 14 mm dropouts compatibleheat treated Cr-Mo female axle6061-T6 alloy body4 wide pawls with dual spring1 pc Cr-Mo driver, 9T right3/8” x 24 tpi bolts17 mm hex bolts available as spare parts418 grams / 14.9 oz


New driver system, 4 wide pawls withdual spring, light and reliable.

Overdrive Cassette Hub

Original Micropegfor pegless use, protects axle + can be used as small peg2 sizes : 3/8” axle and 14 mm axleheat treated cr-moincludes a steel washersold as 1 piece3/8” mm : 52 grams / 1.8 oz14 mm : 36 grams / 1.3 oz

MicropegSame functions as the Original, for female hub2 sizes : for 3/8” slot and 14 mm slotheat treated cr-moincludes a 3/8” x 24 tpi Allen boltsold as 1 piece3/8” mm : 46 grams / 1.6 oz14 mm : 49 grams / 1.7 oz

7075-T6, 3 styles, �ts most hubs.7075-T6 alloy52 mm outer diameter3 versions :- for Superstar Overdrive female axle (15 mm central hole), 35 grams / 1.2 oz- for 3/8” male axle (3/8”x26tpi threaded central hole), 29 grams / 1.0 oz- for Pro�le Mini female axle (17 mm central hole), 35 grams / 1.2 ozsold as 1 pc

2012 color : black

CNC Hex axle boltfor female hub, for peg use (easier to tight)3/8” x 24 tpi, 30 mm longCNC from cr-mo material, for great strengthfor 17 mm socket wrenchsold as 2 pieces

Normal axle boltfor female hub3/8” x 24 tpi, 30 mm longcr-mofor 8 mm Allen keyincludes alloy capsold as 2 pieces

Step washers7 mm steel step washers14 mm to 3/8” converterssold as 2 pieces

Upgrade, replace, adapt your hubs.Hub Parts

-26 -

Catalog 2012.indd 26 2/27/2012 9:39:35 PM

PARTS - Sprocket


The original Superstar sprocket, still rockin’…Pimp Sprocket

The original Superstar sprocket, still rockin’…with splined central hole.

Pimp Sprocket Splined

3- spoke sprocket, 7075-T6 alloy, butted thickness.Trip Sprocket

F3-spoke sprocket, 7075-T6 alloy, butted thickness.7075-T6 alloy15/16” hole + 19 mm and 22 mm adaptors23T = 5.0 mm thick (4 mm in the center), 33 grams / 1.2 oz25T = 5.0 mm thick (4 mm in the center), 39 grams / 1.4 oz


3-spoke sprocket, 7075-T6 alloy, butted thickness,splined central hole7075-T6 alloysplined hole for 19 mm 48-spline crank axle25T only62 grams / 2.2 oz

2012 color : black

3- spoke sprocket, 7075-T6 alloy, butted thickness,splined central hole.

Trip Sprocket Splined

7075-T6 alloy15/16” hole + 19 mm and 22 mm adaptors23T = 5.0 mm thick, 43 grams / 1.5 oz25T = 6.8 mm thick, 56 grams / 1.9 oz28T = 8.6 mm thick, 84 grams / 2.9 oz36T = 6.8 mm thick, 115 grams / 4.1 oz


7075-T6 alloysplined hole for 19 mm 48-spline crank axle28T only83 grams / 2.9 oz

2012 color : black

-27 -

Catalog 2012.indd 27 2/27/2012 9:39:42 PM

PARTS - Crank

PARTS - Pedals


Plateform with grippy pins, loose balls,a�ordable.

Alloy Pedals

Translucent body, molded pinsor steel removable pins.

PC Pedals

New from Superstar, smooth axle area, LHD/RHD compatible.

Duty Crank

strong tubular 3-pc crankRHD/LHD compatible19 mm heat treated cr-mo hollow axle, 48 splines175 mm heat treated cr-mo armsvery low pro�le, ankle-friendly arms813 grams / 29 oz

2012 colors : black, smoked chrome

strong tubular 3-pc crankfor splined sprocket only (no pin drive)19 mm heat treated cr-mo hollow axle, 48 splines175 mm heat treated cr-mo armsvery low pro�le, ankle-friendly arms813 grams / 29 oz

2012 colors : black, smoked chrome

New from Superstar, smooth axle area, for splined sprocket

Duty Crank Splined

traditional plateform shapealloy body9/16” cr-mo axleloose ballsreplaceable screw pinsaxle cap with Superstar logo436 grams / 15.6 oz


PC body pedalsclear/transluscent PC body9/16” cr-mo axleaxle cap with Superstar logo353 grams / 12.6 oz

2012 colors : black, clear, red, green

PC body pedals + removable pinsclear/transluscent PC bodyremovable steel pins9/16” cr-mo axleaxle cap with Superstar logo398 grams / 14.2 oz

2012 colors : black, clear, red

-28-

Catalog 2012.indd 28 2/27/2012 9:40:04 PM

PARTS - Pedals

Small PARTS


Upgrade, replace, adapt your bike or your wrist.

Resistant body, molded pins, colorful.Nylon Pedals

high resistant nylon body9/16” cr-mo axleaxle cap with Superstar logo382 grams / 13.6 oz

2012 colors : black, red, blue, green, purple

UV body : color changes under the sun9/16” cr-mo axleaxle cap with Superstar logo305 grams / 10.9 oz

2012 colors : blue-to-purple, yellow-to-brown,white-to-pink, white-to-purple

Resistant body, molded pins, color varieswhen inside or outside.

UV Pedals

removable brake partscompatible with any 2009-2012 Superstar framescompatible with many frames on the market

wedge seat pinthe famous pin from the old Strawberry patentcompatible with 2008-2010 New Deal framescompatible with 2011-2012 Carlton framecompatible with 2011-2012 Watson framecompatible with 2012 St-Martin Foot Jam frame

fork top capcompatible with Neutral and Grandé Edition forkscompatible with any fork using M25 thread7075-T6 alloythrough hole for 8 mm allen key18 grams / 0.6 lb

rim tapesvinyl coated plastic20 mm widesold as pair

sweat bandembroded original Superstar logo10 cm / 4� long

-29-

Catalog 2012.indd 29 2/27/2012 9:40:30 PM

BMX- LOBO

LOBO Bar

LOBO Fork

Made with Sanko tubing double buttedTop Tube sizes: 20,50”, 20,83”, 21” and 21,26”Rearend: 13,35” till 13,75”Headtube angle: 75ºSeattube angle: 71ºBB Height: 288.75mm/ 11,37”Standover: 220mm/ 8,66”Seatclamp: Integrated SSC System (comes with free pivotal post drilled to 6 positions to adjust)BB type: SpanishBB external machined, heat treated Dropouts: 5mm thick, heat treated and internal machinedRemovable: seatstay brake mounts, cable guides and gyro tabsHeadset: integrated heat treated, external machinedSeat/ ChainStay bridge heat treated, 5mm thickFlat Black, �at dark grey and �at redLimited Edition Color: ED Red2,1Kg/ 4,6 lbs

Super light weight 5mm dropouts with lobo lazer cut Triple butted taped legs with Ø30 to Ø26mm o�set legs Integrated cone race Full 20/20 heat treatment Aluminum CNC Pre-load bolt with mutantbikes logo Externally and Internally CNC machined steer tube Available with 10 mm dropouts slots only 31mm o�set dropouts Flat Black, Flat White, Flat Red, Flat dark grey

Limited Edition Color: ED Red830 grs / 29.28oz 855 grs / 30.16oz w/ top cap

This is one of our Lobo parts, we design the lobo bar to the actual style riding with 28” wide and 8.50” high, we have 5º upsweep to be more confortable. To save weight and get the actual tecnology tubing, our bar are made with multi-butted tubes full heat treated. Also we use the 20/20 tecnology heat treated to save some weight and maintainn the same strength.

www.mutantbikes.com/

Multi-butted bar, Full 20/20 heat treatment Ø20mm double butted cross bar tube back sweep: 11º up sweep: 5º wide: 711.2mm/28" high: 216mm/8.50" Flat black, �at dark grey, �at white and �at red

Limited Edition Color: ED Red690gr/ 24.34oz

LOBO V3 Frame

-30-

Catalog 2012.indd 30 2/27/2012 9:41:15 PM

MTB- 24” Frame

Made with Sanko Japanese tubing, double butted, 100% CrMo24” Frame that �t only on 24” wheels Available sizes toptube length: 558,93mm/ 22” Rear end spacing: 110mm BMX std.Head angle: 71.50º (with 80mm susp. Fork) Seat angle: 72ºChainstay length: 367,03mm/ 14.45” Seatpost size: 25.4mm (BMX) Dropouts: 5mm heat treated, super small dropouts, 14mm axle (to use BMX cassette hubs) Removal U-brake system only Seatpost clamp: integrated SSC System (comes with free pivotal post drilled to 6 position of adjust) Headtube: integrated, heat treated, internal and external machined Bottom braket: SpanishBB, heat treated, internal and external machined BB high: 310mm/12.20” (with 80mm suspension)Removal parts: Gyro tabs, cable gides and brake mounts Heat treated parts: BB, headtube, bridge and dropouts. Taper chain stay tubes with more room for tires then v2 model Flat black, �at blue, �at mustard green

Limited Edition Color: ED Green2,39Kg/ 5,27 lbs

Made with Sanko Japanese tubing double butted, 100% CrMo24” Frame that �t only on 24” wheels Available sizes toptube length: 558.93mm/ 22” Rear end spacing: 135mm MTB std.Head angle: 71.50º (with 80mm susp. Fork) Seat angle: 72º Chainstay length: 367,03mm/14.45” Seatpost size: 25.4mm (BMX) Dropouts: 5mm heat treated, super small dropouts for 10mm axle Removal V-brake system (RVS)* Disc brake mounts Seatpost clamp: integrated SSC System (comes with free pivotal post drilled to 6 position of adjust) Headtube: integrated, heat treated, internal and external machined Bottom braket: SpanishBB, heat treated, internal and external machined BB high: 310mm/ 12.20” (with 80mm front shock) Removal parts: Gyro tabs and V-brake mounts (RVS)* Heat treated parts: BB, headtube, bridge and dropouts. Taper chain stay tubes with more room for tires then v2 model Flat black, �at magenta and �at lemon yellow

2,42Kg/ 5,33 lbs *RVS – Removal V-brake System, own design and developed by mutantbikes


X-Ray V3 Frame

Evolution V3 Frame

-31-

Catalog 2012.indd 31 2/27/2012 9:41:29 PM

MTB- 26” Frame

Made with Sanko Japanese tubing, double butted, 100% CrMo26” Frame that �t only on 26” wheels available size toptube length: 581mm/ 22,87” rear end spacing: 110mm BMX std.head angle: 71.50º (with 80mm susp. Fork) seat angle: 72º chainstay length: 386,33mm/ 15.21”seatpost size: 25.4mm (BMX) Dropouts: 5mm heat treated, super small dropouts, 14mm axle (to use BMX cassette hubs) Removal V-brake system (RVS)* and removal U-brake system Seatpost clamp: integrated SSC System (comes with free pivotal post drilled to 6 position of adjust) Headtube: integrated, heat treated, internal and external machined Bottom braket: SpanishBB, heat treated, internal and external machined bb high: 342,14mm/13,47” (with 80mm susp fork) Removal parts: Gyro tabs, cable gides and brake mounts Heat treated parts: BB, headtube, bridge and dropouts. Taper chain stay tubes with more room for wide tires Flat black, �at mediterranean blue, gloss mustard green

2,46Kg/ 5,42lb *RVS – Removal V-brake System, own design and developed by mutantbikes

Made with Sanko Japanese tubing, double butted, 100% CrMo26” Frame that �t only on 26” wheels available sizes toptube length: 581mm/ 22,87”rear end spacing: 135mm MTB std.head angle: 71.50º (with 80mm susp. Fork) seat angle: 72º chainstay length: 386,33mm/ 15.21” seatpost size: 25.4mm (BMX) Dropouts: 5mm heat treated, super small dropouts, 10mm axle (to use MTB cassette hubs) Disc brake mounts onlySeatpost clamp: integrated SSC System (comes with free pivotal post drilled to 6 position of adjust) Headtube: integrated, heat treated, internal and external machined Bottom braket: SpanishBB, heat treated, internal and external machined bb high: 342,14mm/13,47” (with 80mm susp fork) Removal parts: Gyro tabs onlyHeat treated parts: BB, headtube, bridge and dropouts. Taper chain stay tubes with more room for wide tires Flat black, �at mediterranean blue, gloss mustard green

Limited Edition Color: ED Orange (bronze)2,46Kg/ 5,42 lbs


X-Ray 2SIX Frame

Evolution 2SIX Frame

-32-

Catalog 2012.indd 32 2/27/2012 9:41:42 PM

MTB- Handlebar

PARTS

back sweep: 11ºup sweep: 5ºwide: 700mm/ 27,6”high: 75mm/ 2,95”�at black, gloss army green and �at blue

Limited Edition Color: ED Green422gr/ 14,88oz

we have been develope a new tubing for our handlebars with 20/20 technology, heat treated, the v3 bars tubing is only 22gr heavy then v2, but is 50% stronger new tubing have 1.4mm thick in the bottom and then is double butted until the end of the grip.All v3 bars have the mutantbikes logo lazer etched

back sweep: 11ºup sweep: 5ºwide: 710mm/ 28”high: 95mm/ 3,74”�at black, gloss army green and �at blue

Limited Edition Color: ED Green455gr/ 16,05oz

we have been develope a new tubing for our handlebars with 20/20 technology, heat treated, the v3 bars tubing is only 22gr heavy then v2, but is 50% stronger new tubing have 1.4mm thick in the bottom and then is double butted until the end of the grip.All v3 bars have the mutantbikes logo lazer etched.


Small V3 Handlebar

Tall V3 Handlebar

We designed the SIN to be strong and light, so we machined the possible and keep the good look.The V2 stem has been re�ned with a thicker front peice for added grip when tighting the bars.

Sin V2 Stem 100% CNC machined internally and externally Aluminium 7075-T6 Front load stem 50mm length Handlebar clamp area 22,2mm Heat treated 6mm hollow bolts on the clamp fork area Anodized �at black, orange, purple, red, light blue and powder coated white

195gr / 6,87oz (v1 weight) 206gr / 7,26oz (v2 weight)

-33-

Catalog 2012.indd 33 2/27/2012 9:41:49 PM

PARTS

AL 6061 CNC machined A slot to �t on the SIN stem and to don't twist Upside down �t at any other stem Designed to looks like a spacer super small and light weight Anodized black, red, gold, purple, blue and powder coating white

8gr / 0.28oz each

SSC Retainer sealed bearing with 45ºx45º Headset with 8mm or 15mm option top cup Carbon top cup can be sold separately Mutantbikes printed logo 100% �ber carbon cupCarbon �ber raw color only

61gr / 2.15oz (set with 8mm top cup) 67gr / 2.36oz (set with 15mm top cup) 6gr / 0.21oz (8mm top cup only) 12gr / 0.42oz (15mm top cup only)

Pivotal technology Slimest seat version MutantBikes logo on the rubber patch Kevlar cover with high quality printed drawing White bumpers Black/white, black/red, black/gold, black/purple, dark grey/white, red/white

262 grs / 9.24 oz

Pivotal Technology Lazer etched mutantbikes logo 118mm / 4,64” long25.4mm diameter only Anodized �at black, �at red, �at gold, �at light blue, �at purple and powder coated white

96grs / 3,45oz


Sin Gyro Plate

Carbon Hiddenset

Slimy Seat

Slimy Seat Post

PARTS

Own design CNC 7075-T6 machined aluminium 6,5 mm thickness Only one hole crank mounting Fits spindle size with 19mm and 22mm2 Spacer washer includedAvailable only with 25T and 27T Anodized black, red, gold, purple, light blue and powder coated white

25T with 58grs / 2.04oz 27T with 73grs / 2.57oz

Welded jointUltra light and super strong rimsMade with AL 7075-T6, bouble wall designwith low pro�le34.1 mm wide, 4mm extra wall to avoid dents and prevent �ats, 11mm small side wall height to avoid dents tooAvalaible with 36 holes onlyAnodized black, red, orange, purple, blue and powder coating white

460gr / 16.23 oz each

Double butted spokesSwiss grade stainless steelBag of 50 spokes with black nipplesPowder coated �nishSizes: 14 / 15 x 232mm and 14 / 15 x 236mmBlack, white and red

8grs / 0.28oz (each spoke and nipple)

The mutantbikes spokes are not di�erent from the other ones in the market, the only info we can give you is that we choose double butted spokes with Swiss grade stainless steel.We made spokes only because we need them to build the wheels to our team riders for our upcoming rims and hubs…


Caravela Sprocket

Storm Rim

Spokes

-34-

Catalog 2012.indd 34 2/27/2012 9:42:01 PM

PARTS

Own design CNC 7075-T6 machined aluminium 6,5 mm thickness Only one hole crank mounting Fits spindle size with 19mm and 22mm2 Spacer washer includedAvailable only with 25T and 27T Anodized black, red, gold, purple, light blue and powder coated white

25T with 58grs / 2.04oz 27T with 73grs / 2.57oz

Welded jointUltra light and super strong rimsMade with AL 7075-T6, bouble wall designwith low pro�le34.1 mm wide, 4mm extra wall to avoid dents and prevent �ats, 11mm small side wall height to avoid dents tooAvalaible with 36 holes onlyAnodized black, red, orange, purple, blue and powder coating white

460gr / 16.23 oz each

Double butted spokesSwiss grade stainless steelBag of 50 spokes with black nipplesPowder coated �nishSizes: 14 / 15 x 232mm and 14 / 15 x 236mmBlack, white and red

8grs / 0.28oz (each spoke and nipple)

The mutantbikes spokes are not di�erent from the other ones in the market, the only info we can give you is that we choose double butted spokes with Swiss grade stainless steel.We made spokes only because we need them to build the wheels to our team riders for our upcoming rims and hubs…


Caravela Sprocket

Storm Rim

Spokes

-35-

Catalog 2012.indd 35 2/27/2012 9:42:02 PM

BIKES

www.khebikes.com

Maceto PRO 2012The PRO series feature speci�c pro frames that are ridden and approved by our team riders and an exclusive selection of high-end parts. The PRO series are state of the art bmx bikes built around the best parts we can o�er.

SPECIFICATIONSFRAME: Daniel Dhers Pro Model - 100% heat-treated Sanko CrMo - Int Headset - TT 20.25“/ CS 13.25”/ HT 75°FORK: KHE Arsenic fork - 100% heat-treated CrMo - seamless, butted, �uted & tapered legsBAR: KHE AnchorV2 bar stem combo - 100% CrMo - multibutted - 8.25” high / 3° upsweep/ 10°backGRIPS: KHE Pyramid LEVER: PRISM HD Lever BRAKE: KHE U-Brake - Cold forged arms on AFFIX bushing - clear padsROTOR: Odyssey GTX-R w/ PRISM upper cableCRANK: KHE Erlkönig 3-pc - �uted CrMo arms - 48T 19mm Titanium hollow spindle - 175mmBB: KHE MidBB on AFFIX bushSPROCKET: KHE Rotor 25T alloyPEDALS: KHE Alpha CNC slim sealedCHAIN: KHE hollowpin hal�inkFRONT : KHE BigV rim / KHE Female axle Front 36H / DT Swiss spokesWHEELREARL: KHE BigO rim / KHE Female axle Cassette 9T 36H / DT Swiss spokesWHEELTIRES: KHE MAC1.5 foldable front & rearSEAT/POST: KHE Pluma seat/seatpost comboSEATCLAMP: IntergratedEXTRAS: ODYSSEY GTX-R rotor, 2 KHE Alchemy plastic pegsWEIGHT: 8,9kg / 19,6lbs (w/o pegs)

FRAME: 100% 4130 CrMo - Int Headset & removable brake pivots - TT 20.6“ / CS 13.5” / HT 75°FORK: PRISM fork - 100% 4130 CrMo - butted & tapered legs BAR: PRISM 2-pc full 4130 CrMo, multi-butted 8” high STEM: PRISM FrontloadGRIPS: PRISM Ansa LEVER: PRISM HD Lever BRAKE: PRISM U-Brake - Cold forged arms on AFFIX bushing ROTOR: Odyssey GTX-R w/ PRISM upper cable CRANK: PRISM 3-pc CrMo arms - 48T 19mm CrMo spindle - 175mm BB MidBB sealed SPROCKET: KHE Rotor 25T steel PEDALS: PRISM Thin plastic CHAIN PRISM hal�ink FRONT: ALIENATION Deviant rim / PRISM Female axle hub 36HWHEELREAR: WHEEL ALIENATION Blacksheep double wall rim / PRISM Female WHEEL axle cassette hub 9T 36HTIRES: KHE MAC2 steel front / MAC1.5 steel rear SEAT/POST: KHE Pluma seat/seatpost combo SEATCLAMP: KHE CNC seatclamp EXTRAS: ODYSSEY GTX-R rotor, 2 KHE Alchemy plastic pegs WEIGHT: 10,1kg / 22,26lbs (w/o pegs)

SPECIFICATIONSThe AD series is our advanced bike range. All bikes in this range are built with butted 4130 CrMo frames, forks and bars and come with sealed female hubs and KHE MAC tires. Considering the speci�cation, the AD bikes could easily be seen as real pro bikes.

Maceto AD 2012

-36-

Catalog 2012.indd 36 2/27/2012 9:42:10 PM

BIKES

www.khebikes.com

Maceto ST 2012The ST series is de�ned as our starter range for serious riders. The ST bikes are built around a full 4130 CrMo frame and fork, with integrated headset and sealed MidBB. The bikes also feature an assortment of PRISM parts includingfemale bolt hubs. The ST series has been designed to o�er the best speci�cation for the price.

SPECIFICATIONSFRAME: 100% 4130 CrMo - Int Headset - TT 20.6“ / CS 13.5” / HT 75° FORK: 100% 4130 CrMo BAR: 2-pc Extra Wide - 8” high - HiTen steel STEM: PRISM Frontload GRIPS: PRISM Ansa LEVER: PRISM Pincher Lever BRAKE: PRISM U-Brake w/ soft pads ROTOR: PRISM rotor w/ PRISM upper cable CRANK: PRISM 3pc CrMo crank -175mm BB: MidBB sealed SPROCKET: KHE Rotor 25T steel PEDALS: PRISM Thin plastic CHAIN: KMC 1/2x1/8‘‘ black chain FRONT: ALIENATION PBR rim / PRISM Female axle front hub 36H WHEELREAR : ALIENATION Blacksheep double wall rim / WHEEL semi sealed Female axle cassette hub 9T 36H TIRES: PRISM FAT 2,3 front & rear SEAT/POST: KHE Pluma seat/seatpost combo SEATCLAMP: PRISM seatclamp EXTRAS: PRISM rotor, KHE Alchemy plastic pegs + chain tensionersWEIGHT: 11,2kg / 24,7lbs (w/o pegs)

FRAME: Daniel Tünte Pro Model - 100% Sanko CrMo - Int Headset - TT 20.675“/ CS 13.25”/ HT 75°FORK: KHE Arsenic fork - 100% heat-treated CrMo - seamless, butted, �uted & tapered legsBAR: KHE Arsenic 2-pc bar - 100% CrMo - multibutted - 8.75” high / 3°upsweep / 10°backSTEM: KHE PRO stemGRIPS: KHE SholaLEVER: PRISM HD LeverBRAKE: KHE U-Brake - Cold forged arms on AFFIX bushing - clear padsCRANK: KHE Erlkönig 3-pc - �uted CrMo arms - 48T 19mm Titanium hollow spindle - 175mmBB: KHE MidBB on AFFIX bushPROCKET: KHE Rotor 25T alloyPEDALS: KHE Alpha CNC slim sealedCHAIN: KHE hollowpin hal�inkFRONT: KHE BigV rim / KHE Female axle Front 36H / DT Swiss spokesWHEELREAR: KHE BigO rim/ KHE Female axle Cassette 9T 36H / DT Swiss spokesWHEELTIRES: KHE MAC2 foldable front & rearSEAT/POST: PARANO GARAGE pivotal slimSEATCLAMP: IntergratedEXTRAS: ODYSSEY GTX-R rotor, 2 KHE CrMo pegsWEIGHT: 9,6kg / 21,16bs (w/o pegs)

SPECIFICATIONSThe PRO series feature speci�c pro frames that are ridden and approved by our team ridersand an exclusive selection of high-end parts. The PRO series are state of the art bmx bikesbuilt around the best parts we can o�er.

Shotgun PRO 2012

-37-

Catalog 2012.indd 37 2/27/2012 9:42:14 PM

BIKES

www.khebikes.com

Shotgun AD 2012The AD series is our advanced bike range. All bikes in this range are built with butted 4130 CrMo frames, forks and bars and come withsealed female hubs and KHE MAC tires. Considering the speci�cation, the AD bikes couldeasily be seen as real pro bikes.

SPECIFICATIONSFRAME: 100% 4130 CrMo - Int Headset & removable brake pivots - TT 20.6“ / CS 13.5” / HT 75° FORK: PRISM fork - 100% 4130 CrMo - butted & tapered legs BAR: PRISM 2-pc full 4130 CrMo, multi-butted 8” - Chrome STEM: PRISM Frontload GRIPS: KHE Shola LEVER PRISM HD LeverBRAKE: PRISM U-Brake - Cold forged arms on AFFIX bushingCRANK: PRISM 3-pc CrMo arms - 48T 19mm CrMo spindle - 175mm BB MidBB sealed SPROCKET: KHE Rotor 25T steel chrome PEDALS: PRISM Thin plastic CHAIN: PRISM hal�inkFRONT: ALIENATION Deviant rim / PRISM Female axle hub 36HWHEELREAR: ALIENATION Blacksheep double wall rim/ PRISM Female axle WHEEL cassette hub 9T 36HTIRES KHE: MAC2 steel front & rear SEAT/POST: KHE Exhib seat/seatpost combo SEATCLAMP: KHE CNC seatclamp EXTRAS: KHE CrMo pegs WEIGHT: 10,2kg / 22,5lbs (w/o pegs)

FRAME: 100% 4130 CrMo - Int Headset - TT 20.6“ / CS 13.5” / HT 75°FORK: 100% 4130 CrMo BAR 2-pc Extra Wide - 8” high - HiTen steel STEM: PRISM Frontload GRIPS: PRISM Ansa LEVER: PRISM Pincher Lever BRAKE: PRISM St U-Brake w/ soft pads CRANK: PRISM 3pc CrMo crank -175mm BB MidBB sealed SPROCKET: KHE Rotor 25T steel chrome PEDALS: PRISM Thin plastic CHAIN: KMC 1/2x1/8‘‘ black chain FRONT: ALIENATION PBR rim / PRISM Female axle front hub 36H WHEELREAR: ALIENATION Blacksheep double wall rim /WHEEL semi sealed Female axle cassette hub 9T 36H TIRES: PRISM FAT 2,3 front & rear SEAT/POST: KHE Exhib seat/seatpost combo SEATCLAMP: PRISM seatclampEXTRAS: one pair of steel pegs + chain tensioners WEIGHT: 11,3kg / 24,9lbs (w/o pegs)

SPECIFICATIONSThe ST series is de�ned as our starter range for serious riders. The ST bikes are built around a full 4130 CrMo frame and fork, with integrated headset andsealed MidBB. The bikes also feature an assortment of PRISM parts including female bolt hubs. The ST series has been designed to o�er the best speci�cation for the price

Shotgun ST 2012

-38-

Catalog 2012.indd 38 2/27/2012 9:42:19 PM

BIKES

www.khebikes.com

A-Damn PRO 2012The PRO series feature speci�c pro frames that are ridden and approved by our team ridersand an exclusive selection of high-end parts. The PRO series are state of the art bmx bikesbuilt around the best parts we can o�er.

SPECIFICATIONSFRAME: Adam Kun Pro Model - 100% heat-treated Sanko CrMo - Int Headset - TT 19“/ CS 12.9”/ HT 74,5°FORK: KHE Addict fork - 100% heat-treated CrMo - butted & tapered legs - zero o�setBAR: KHE A-Blast 2-pc bar - 100% CrMo - multibutted - 9”high / 5°upsweep / 6°backSTEM: KHE MinimalismGRIPS: PRISM AnsaLEVER: PRISM HD LeverBRAKE: KHE U-Brake - Cold forged arms on AFFIX bushing - clear padsCRANK: KHE Erlkönig 3-pc - �uted CrMo arms - 48T 19mm Titanium hollow spindle - 160mmBB: PRISM EuroBB on AFFIX bushSPROCKET: KHE Rotor 20T alloyPEDALS: KHE StimulatorzCHAIN: KHE Tanga LTFRONT: KHE BigO rim / KHE Female axle Front 36H / DT Swiss spokesWHEELREAR : KHE BigV rim / KHE Female axle Freecoaster Light 9T 36H / WHEEL DT Swiss spokesTIRES: KHE MAC1 Flat front & rearSEAT/POST: KHE Watanabe seat / KHE Prismatic postSEATCLAMP: Intergrated EXTRAS 4 KHE Alchemy plastic pegs w/grip + KHE Dubz chain tensionersWEIGHT: 8,7kg / 19,18lbs (incl. pegs)

FRAME: 100% 4130 CrMo - Int Headset & removable brake pivots - TT19.25“ / CS 13” / HT 75° FORK: Adam AD fork - 100% 4130 CrMo - tapered legs - zero o�set BAR: Adam AD 2-pc bar - 100% CrMo - 9”high / 5°upsweep / 6°back STEM: PRISM Flat GRIPS: KHE Pyramid LEVER: PRISM HD LeverBRAKE: PRISM U-Brake - Cold forged arms on AFFIX bushingCRANK: PRISM 3-pc CrMo arms - 48T 19mm CrMo spindle - 160mm BB: MidBB sealed SPROCKET: KHE Rotor 25T steelPEDALS: PRISM Thin plastic CHAIN: KHE Tanga LT FRONT: ALIENATION Blacksheep double wall / Geisha front 10mm 36H WHEELREAR: ALIENATION Deviant rim / KHE Reverse freecoaster 14mm 36H WHEELTIRES: KHE MAC1 foldable White front & rear SEAT/POST: KHE Watanabe seat / KHE Prismatic post SEATCLAMP: KHE CNC seatclamp EXTRAS: 4 KHE Alchemy plastic pegs with grip + chain tensionersWEIGHT: 9,9kg / 21,82 lbs (incl. pegs)

SPECIFICATIONSThe AD series is our advanced bike range. All bikes in this range are built with butted 4130 CrMo frames, forks and bars and comewith sealed female hubs and KHE MAC tires. Considering the speci�cation, the AD bikescould easily be seen as real pro bikes.

A-Damn AD 2012

-39-

Catalog 2012.indd 39 2/27/2012 9:42:24 PM

BIKES

www.khebikes.com

A-Damn ST 2012The ST series is de�ned as our starter range for serious riders. The ST bikes are built around a full 4130 CrMo frame and fork, with integrated headset and sealed MidBB. The bikes also feature an assortment of PRISM parts including female bolt hubs. The ST series has been designed to o�er the best speci�cation for the price.

SPECIFICATIONSFRAME: 100% 4130 CrMo - Int Headset & removable brake pivots - TT19.25“ / CS 13” / HT 75° FORK: Adam AD fork - 100% 4130 CrMo - tapered legs - zero o�set BAR: Adam AD 2-pc bar - 100% CrMo - 9”high / 5°upsweep / 6°back STEM: PRISM Flat GRIPS: PRISM Ansa LEVER: PRISM Pincher LeverBRAKE: PRISM St U-Brake w/ soft pads CRANK: PRISM 3pc CrMo crank -160mm BB MidBB sealed SPROCKET: KHE Rotor 25T steel PEDALS: PRISM Thin plastic CHAIN KMC 1/2x1/8‘‘ black chain FRONT: PRISM EasyO double wall rim / PRISM Tiny 10mm 36H WHEELREAR: PRISM EasyO double wall rim / Taska freecoaster 36H WHEELTIRES: PRISM Impac front & rear SEAT/POST: KHE Watanabe seat / aluminium seatpost SEATCLAMP: PRISM seatclampEXTRAS: Aluminium pegs w/ grip + chain tensioners WEIGHT: 11,1kg / 24,47 lbs (incl. pegs)

FRAME: HiTen steel w/ F-SET rotor all around geometry (TT20,5“) FORK: HiTen steel 14mm w/ U-brake pivots BAR: 2-pc Extra Wide - 8” high - HiTen steel STEM: Topload GRIPS: PRISM Classic LEVER: F-Set Aluminium lever BRAKE: F-Set U-Brake - front and rear ROTOR: F-SET rotor system CRANK: 3pc CrMo crank -175mm BB MidBB ball SPROCKET: KHE Rotor 25T steel PEDALS: PRISM Thin plastic CHAIN: KMC 1/2x1/8‘‘ black chain FRONT: PRISM EasyO double wall rim / 14mm, 36H hub WHEELREAR : PRISM EasyO double wall rim / Cassette 9T, 14mm, 36H WHEELTIRES: PRISM FAT 2,3 front & rear SEAT/POST: PRISM Dandy / 25,4mm seatpost SEATCLAMP: PRISM seatclamp EXTRAS: one pair of steel pegs + chain tensioners + gold valve cap WEIGHT: 13,3kg / 29,3lbs (w/o pegs)

SPECIFICATIONSThe 20TH bike has been created to celebrate our 20th anniversary. We decided to keep it in our line to show how dedicated we are towards the bmx industry. The speci�cations are just incredible for the price. This year the 20TH even come with 25x9 gearing and PRISM FAT tires.

20TH

-40-

Catalog 2012.indd 40 2/27/2012 9:42:29 PM

BIKES

www.khebikes.com

Root 540The ROOT series is dedicated to riders that are looking for a quality bike to start riding. The bikes feature a strong HiTen frame with integrated headset, and a great selection of partsincluding female hubs and 25x9 gearing. The ROOT series is a solid line for an a�ordable priceand a great way to get into BMX.

SPECIFICATIONSFRAME: HiTen steel w/ Int Headset - TT 20.6“ / CS 13.5” / HT 75° FORK HiTen steel 10mm BAR: 2-pc Extra Wide - 8” high - HiTen steel - Chrome STEM: KHE MINIMALISM GRIPS: PRISM Classic LEVER: Aluminium lever BRAKE: PRISM St U-Brake w/ soft pads CRANK: 3pc CrMo crank -175mm BB MidBB sealed SPROCKET: KHE Rotor 25T steel chromePEDALS: PRISM Thin plastic CHAIN: KMC 1/2x1/8‘‘ black chain FRONT: Chrome double wall rim / Female axle front hub 36H WHEELREAR: Chrome double wall rim / semi sealed Female axle cassette hub 9T 36H WHEELTIRES: PRISM FAT 2,3 front & rear SEAT/POST: PRISM seat/seat tube comboSEATCLAMP: PRISM seatclamp EXTRAS: one pair of steel pegs + chain tensioners WEIGHT: 11,9kg / 26,2lbs (w/o pegs)

FRAME: HiTen steel w/ Int Headset - TT 20.6“ / CS 13.5” / HT 75°FORK: HiTen steel 10mmBAR: 2-pc Extra Wide - 8” high - HiTen steelSTEM: PRISM FrontloadGRIPS: PRISM ClassicLEVER: Aluminium leverBRAKE: PRISM St U-Brake w/ soft padsCRANK: 3pc CrMo crank -175mmBB: MidBB sealedSPROCKET: KHE Rotor 25T steelPEDALS: PRISM Thin plasticCHAIN: KMC 1/2x1/8‘‘ black chainFRONT: PRISM EasyO double wall rim / Female axle front hub 36HWHEELREAR: PRISM EasyO double wall rim / semi sealed Female axle cassetteWHEEL hub 9T 36HTIRES: PRISM FAT 2,3 front & rearSEAT/POST: PRISM seat/seat tube comboSEATCLAMP: PRISM seatclampEXTRAS: ne pair of steel pegs + chain tensionersWEIGHT: 11,7kg /25,79lbs (w/o pegs)

SPECIFICATIONSThe ROOT series is dedicated to riders that are looking for a quality bike to start riding. The bikes feature a strong HiTen frame with integrated headset, and a great selection of partsincluding female hubs and 25x9 gearing. The ROOT series is a solid line for an a�ordable priceand a great way to get into BMX.

Root 360

-41-

Catalog 2012.indd 41 2/27/2012 9:42:33 PM

BIKES

FRAME

www.khebikes.com

Root 180The ROOT series is dedicated to riders that are looking for a quality bike to start riding. The bikes feature a strong HiTen frame with integrated headset, and a great selection of parts including female hubs and 25x9 gearing. The ROOT series is a solid line for an a�ordableprice and a great way to get into BMX.

SPECIFICATIONSFRAME: HiTen steel w/ Int Headset - TT 20.6“ / CS 13.5” / HT 75° FORK HiTen steel 14mm BAR: 2-pc Extra Wide - 8” high - HiTen steel STEM: Topload GRIPS: PRISM Classic LEVER: Aluminium lever BRAKE: PRISM St U-Brake w/ soft padsCRANK: 3pc CrMo crank -175mm BB MidBB ball SPROCKET: KHE Rotor 25T steel PEDALS: VP plastic Red Orange CHAIN: KMC 1/2x1/8‘‘ black chain FRONT: PRISM EasyO double wall rim / 14mm, 36H hub WHEELREAR: PRISM EasyO double wall rim / Cassette 9T, 14mm, 36H WHEELTIRES: PRISM FAT 2,3 front & rear SEAT/POST: PRISM seat/seat tube combo SEATCLAMP: PRISM seatclamp EXTRAS: chain tensioners WEIGHT: 11,8kg / 26,0lbs (w/o pegs)

Daniel Dhers pro model + 20.25”TT + 13.3”CS + 75°HT + 71°ST + BB 42,1mm from centerline + 100% Japan Sanko CrMo + heat treated front triangle + MidBB + engraved HT + TaperLock dropouts + �uted seat tube + removable brake pivots + double brake route + integrated seatclamp + super lightweight of 1.76 kg (3.88 lbs)

SPECIFICATIONS

Daniel Dhers AD model + 20.6”TT + 13.5”CS + 75°HT + 71°ST + BB 38,1mm from centerline + 100% CrMo + MidBB + 14mm dropouts + removable brake pivots + integrated head set + weight: 1,9kg /4.19lbs + colour: glossy white

SPECIFICATIONS

Maceto PROKHEbikes Maceto frame designed by trickmachine Daniel Dhers. Perfect developt geometry with a lot of details based by X-Games winner Daniel Dhers daily riding and knowledge.A toptube of 20.25" and a super lightweight of 1.76 kg (3.88 lbs) to get an optimal trick control especially during Park riding and technical movements. 14mm lasercuted dropouts, special strong pips made by 100% heat treated Japan Sanko CrMo and removable U-brake pivotos, gyro tabs and cable hangers a just some of the technical highlights to ride and enjoy the BMX world with all its movements and possibilitis.

Maceto ADKHEbikes Maceto frame is a AD frame from our complette bikes range. The frame has a tight geometry with a short Chain Stay and a steep Head Tube angle for nervous response. The 20.6’’ Top Tube allows for better control and faster spinning tricks. The frame is made of CrMo and has been reinforced to ensure strength and sti�ness.

-42-

Catalog 2012.indd 42 2/27/2012 9:42:38 PM

FRAME

www.khebikes.com

Daniel Tünte pro model + 20.675”TT + 13.25”CS + 75°HT + 71°ST + BB 44,5mm from centerline + 100% Japan Sanko CrMo + heat treated HT + o�set DT (internal gusset) + MidBB + TaperLock Dropouts + �uted seat tube + lasercut 14mm dropouts + removable brake pivots + integrated seatclamp + weight 2kg (4.4lbs) + colour: raw phosphate

SPECIFICATIONS

Shotgun PROThe Shotgun Pro is the signature frame from our team rider Daniel Tünte. This frame is especially made for Street riding and features all the ideas from Daniel. For example a longer seat tube, a integrated seat clamp or a extra welded gusset.

Adam Kun Pro Model + 19”TT + 12.9”CS + 74.5°HT + 71°ST + BB 47mm from centerline + 100% Japan Sanko CrMo + heat treated HT + EuroBB + lasercut 10 mm dropouts + �uted seat tube + integrated seatclamp + brakeless+ weight 1.75 kg (3.86lbs)

SPECIFICATIONS

A-Damn PROAdam Kun is one of the best BMX �atland riders in the world and he took a lot of experience, motivation and energy to create his new A-DAMN signature frame which has the perfect geometry to ride �atland. Based on a 19" TT, a 12.9" CS made by 100% Japan Sanko CrMo and an amazing weight of 1.75 kg (3.86lbs) is the fact of feeling and control during tricks combination the most important attribute of the KHEbikes A-DAMN frame.

Adam Kun AD Model + 19.25”TT + 13”CS + 75°HT + 71°ST + BB 38,1mm from centerline + 100% CrMo ·integrated headset + MidBB + 14mm Dropouts + removable brake pivots + colour: matt titan + weight 2,1kg / 4.63lbs

SPECIFICATIONS

A-Damn ADAdam Kun is one of the best BMX �atland riders in the world and he took a lot of experience, motivation and energy to create his new A-DAMN signature frame which has the perfect geometry to ride �atland. Based on a 19,25" TT, a 13" CS made by 100% CrMo and an amazing weight of 2,1kg / 4.63lbs is the fact of feeling and control during tricks combination the most important attribute of the KHEbikes A-DAMN frame.

AD model in Limited colours: titane grey and matt black 20.6”TT + 13.5”CS + 75°HT + 71°ST + BB 38,1mm from centerline + 100% CrMo + MidBB + 14mm dropouts + removable brake pivots + integrated head set + weight: 1,9kg /4.19lbs

SPECIFICATIONS

Limited Edition ADThe KHEbikes Limited frame are similar to the AD frame from our complette bikes range. The frame has a tight geometry with a short Chain Stay and a steep Head Tube angle for nervous response. The 20.6’’ Top Tube allows for good control and fast spinning tricks. The frame is made of CrMo and has been reinforced to ensure strength and sti�ness.

NOTE: The frames came in with wrong artworks and colours, but the spec are the same as the AD frame. Only the colours are di�ferent, this is why it is a limited edition.

-43-

Catalog 2012.indd 43 2/27/2012 9:42:43 PM

FORK

www.khebikes.com

100% heat treated 4130 CrMo + 31,8 mm o�-set + 4 mm dropouts + �uted & tapered fork legs for better weight & smooth style + seamless + butted + integrated bearing race 45° + for 10mm alex + without U-brake pivots + weight: 860g (1.89lbs) + colors: black or raw phosphat

SPECIFICATIONS

Arsenic ForkThe Arsenic fork is special made for PRO street and park riding, the fork is made of 100% heat-treated CrMo and comes with tapered legs.

100% 2020 heattreated + 30mm o�-set + 5mm dropouts with perfect peg shape + cone double butted fork legs for better weight & smooth style + Weight: 880g (1.971lbs) + lifetime warranty + available in: 10mm and without U-Pivots + Colors: black, gun-grey , black cromerace + weight 800g (1.763lbs)

SPECIFICATIONS

Cirrus ForkThe KHEbikes Cirrus fork is a very lightweight and strong BMX fork which is special made for all the daily tasks and demands of high level riding. Lifetime warranty and 100% 2020 heattreatet CrMo with 30mm extension, 5mm dropouts and availabel in nearly every favorite rider and style variation and di�erent colors.

100% seamless 4130 CrMo + 2020 heattreated + dropouts with perfect peg shape + butted + �uted + tapered fork legs for better weight + available in: 10mm without U-Pivots + Colors: black, white, silver + weigth 860g ( 1.895 lbs)

SPECIFICATIONS

Pluma ForkThe Daniel Dhers signature fork is made of 100% Sanko CrMo. With �uted and butted tubes which makes the fork lighter and extremly stronger.

100% Sanko CrMo + 2020 heat treated + multi butted and tampered from Ø 28,6 mm to Ø 24,9 mm + removable brake pivots + zero o�-set + 5mm dropouts + for 10mm axle + compression bolt: M18*P1.5 + front brake compatiple + compresion bolt tool: 32mm + color matt black + 178 mm steerer tube + height: 308 mm + no integrated bearing race + weight 800g (1.763lbs)

SPECIFICATIONS

Katana ForkThe KHE bikes Tatana fork is one of the lightes fork on the market. These fork is a special BMX Flatland fork with a very small design, for more space if you doing frontwheel tricks.

-44-

Catalog 2012.indd 44 2/27/2012 9:42:47 PM

FORK

HANDLEBAR

100% 4130 Japan CrMo butted conetubes (2020 technology) + 10mm CNC dropouts (5mm thick) + Inner thread, alloy top bolt + with U-Pivots + CrMo shaft 175mm + 0mm extension + brakecable cutting + weight 738g (1.62 lbs) + Colors: black, silver

SPECIFICATIONS

Tanaka Fork (light)KHEbikes was the �rst company which o�ered lightweight �atland forks. After the butted tubing technology allowed us to use CrMo tubes without increasing weight compared to aluminium material we decided to change to CrMo. The Tanaka fork also has cone tubes but �at pressed and welded inside the CNC machined dropouts. This way everything gets �at and helps a lot to spin around the pegs or grabbing the fork by hand.

Multi-butted CrMo bar + 3D invest casting CrMo stem + 100% heat treated + Height: 8.25“ + Upsweep: 3“ + Backsweep: 10“ + bar perpendicular to the stem (straight to the fork) + 48mm o�set + Weight: 870g + Colours: Gun Grey

SPECIFICATIONS

Anchor V2The Anchor V2 is more than an evolution of an existing design, it is a total rebirth. The Anchor V2 is built around a multi-butted CrMo bar on which a 3D invest cast stem is directly welded. The closed design of the stem and the fact that the bar is not cut in middle avoid �exing and create a very sti� combination. The new stem has been totally redesigned to ensure a strong support of the stem on the fork steerer tube. The stem is hollowed which allow to keep the weight down. The welding areas have been specially prepared to ensure a very strong bar/stem joining. The improved design of the clamp allows a large area of contact and spread the clamping force more evenly. In addition, only one bolt needs to be tighten in order to clamp the bar combo, it is easy and very convenient. No more needs to struggle to �nd again the exact position of your bar on the stem!

ANCHOR BAR ASSEMBLING

www.khebikes.com

MINIMUM REQUIREMENTS:A steerer tube length of 36mm or higher is needed. (PIC 1)If the steerer tube is too short, the stem may not have su�cient clamping surface against the steerer tube to be used safely.

ASSEMBLY:- Apply grease on the rounded part of the A�x clamp that gets in contact with the stem. - Apply grease on the thread of the bolt clamp. - Always use a washer under the stem (PIC 2). Do not place the stem directly on the bearing cap- Place the bar stem combo on the steerer tube. A steerer tube length of 36mm or higher is needed. This means that the steerer tube should be higher than the stem. The use of a washer on top of the stem will allow you to tight the compression bolt and ensure a secure assembly (PIC 3).- Install the compression bolt and apply enough torque to remove all play from the headset while ensuring it still rotates freely. The compression bolt must compress the stem, washers and the bearing. Therefore, it is important that the top cap of the compression bolt does not get in contact with the top of the steerer tube. If the compression bolt gets in contact with the steerer tube, su�cient compression may not be possible and the bearings will remain loose, risking rapid wear and possible damage to the fork, the stem and the frame.- Align the bar/stem combo with the fork. - Tight the bolt clamp to secure the stem to the steerer tube. It is essential that the stem is securely tightened to the steerer tube. Do not over tighten (max torque 29N.m)

WARRANTY:The KHEbikes Anchor bar/stem combo is warranted for one year from the date of purchase against defects in materials and workmanship. FAILURE TO FOLLOW INSTRUCTIONS and IMPROPER ASSEMBLY will void the warranty.In addition, this warranty does not cover damage occurring during shipment, storage, neglect or poor maintenance, misuse, accidents or crashes, installation or assembly with incompatible products or modi�cation. Warranty claim should be made through the original dealer or distributor, when possible. A dated proof of purchase is required.

-45-

Catalog 2012.indd 45 2/27/2012 9:42:51 PM

HANDLEBAR

WHEEL

www.khebikes.com

multi butted + heat treated + made of 4130 CrMo + backsweep: 10° + upsweep: 3° + hight: 8.75" + wide: 28,75" + weight: 694g (1.53 lbs) + color: raw phosphat or black

SPECIFICATIONS

Arsenic BarThe Arsenic handlebar features a comfortable 8.75 ‘’ rise and 29’’ width. Full heat-treated and multi-butted for a strong and light product.

multi butted + heat treated + made of Mugen (lighter and stronger than CrMo) + backsweep: 11° + upsweep: 6° + hight: 8.25" + wide: 28" + weight: 644g (1.42 lbs) + color: silver

SPECIFICATIONS

Pluma BarThe Pluma bar is a signature Park handlebar from the X-Games winner Daniel Dhers. The handlebar is very light and duable at the same time.

Flatland Handlebar/Stem Combo3pc + stem Design by Mark PetterssonRaise: 8.35" / 212 mm (stem bottom to griptube) Width: 23.23" / 590 mmBacksweep: 3.5°No UpsweepFull Sanko 4130 Full Heat Treated, 6 ButtedCNC’d lightweight Stem part with 2 boltsParallel to fork, O�set 1.2" / 31mmColor: pilot blackComplete weight: 1.45 lbs / 660 g

SPECIFICATIONS

Swissmiss BarThe KHE bikes SwissMiss bar is a Flatland Handlebar/Stem Combo. These special part save so much weight and is even lighter then the lightest handlebar and stem together. The KHE bikes SwissMiss bar is design by Mark Pettersson.

KHEbikes Astern Freecoaster + KHE & DT-swiss spoks + KHEbikes Big O rim + 14mm hollow axle + 36H + color: black and chrome + weight 1180g / 2.6lbs

SPECIFICATIONS

Astern WheelThis wheel is made for Freecoaster Street riding and comes with an adjustable Astern Freecoaster, DT-swiss spokes and with a Big O rim.

-46-

Catalog 2012.indd 46 2/27/2012 9:42:55 PM

WHEEL

RIM

www.khebikes.com

KHEbikes Geisha light Freecoaster + KHE & DT-swiss spoks + KHEbikes Big O or Big V rim + 14mm hollow axle + 36H + color: black and chrome + weight 1180g / 2.6lbs + also available as frontwheel

SPECIFICATIONS

Geisha Light WheelThis wheel is made for Flatland riding and comes with a Geisha light Freecoaster, DT-swiss spokes and with a Big O or Big V rim. Front wheel also available!

KHEbikes Reverse Freecoaster + KHE & DT-swiss spoks + KHEbikes Big O rim + 14mm hollow axle + 36H + color: black and chrome + weight 1240g / 2,73lbs

SPECIFICATIONS

Doublewall + made of aluminium + 36H + Color: chrome, cyan,black and black with grinded sidewall + Weight: 440g (15.520oz)

SPECIFICATIONS

Reverse WheelThis wheel is made for Freecoaster Street riding and comes with a Reverse Freecoaster, DT-swiss spokes and with a Big O rim.

Big-O Rim

Astral Front WheelAstral is a lightweight wheel, which is made in Germany.

Radio WheelThis wheel is strong and light at the same time. The Radio wheel is made in Germany.

3/8" axle + Astral radial hub + DT-swiss spokes + 32H + Big-V rim + color: black + weight: 698g / 1.53lbs

SPECIFICATIONSKHEbikes Radio cassette hub + KHE & DT-swiss spoks + KHEbikes Big O rim + 14mm axle + 36H + color: chrome + weight 1230g / 2,73lbs

SPECIFICATIONS

The BIG-O rim is a lightweight but durable doublewall rim, made of aluminium. It was developed in cooperation with Alienation.Designed to be cross-laced (spoke runs from rim to opposite spoke �ange of hub) for increased strength.

-47-

Catalog 2012.indd 47 2/27/2012 9:42:59 PM

RIM

TIRE

www.khebikes.com

KHE MAC2 DIRT + 20 x 2,10" (55 mm) size, MAX 6 bar + Weight: 554 g + Special dirt tread for more grip + Steel beaded + Improved traction + Special durable compound + Also available in white

KHE MAC1.5 STREET + Perfect to use for Street riding on the rear wheel + 20 x 1,90" (48mm) size, MAX 6 ba + Weight: 456 g + Steel beaded + Improved traction + Special durable compound + Also available in white

weight tolerance for all tires: +/-8%

SPECIFICATIONS

MAC1.5 Steel Beaded TiresThe steel beaded version of the famous MAC, lower price, still very lightweight!

KHEbikes MAC2 street tan wall + 20 x 2.1" (55mm) size + MAX 8 bar (120PSI) + weight: 630 g + steel beaded + integrated puncture proof + special durable compound + stronger side walls + long life tire + colour black / tan

weight tolerance for all tires: +/-8%

SPECIFICATIONS

MAC2 Street Tan Wall TiresKHE MAC2 STREET TAN WALLWe are proud to introduce you our �rst tan wall tire. This tire is perfect for Street riding, cause of the integrated puncture proof and stronger side walls.These tires give your bike a real unique look, with a special new school / old school �avour.

double wall + made of 6061-T-6 aluminum + 36H + Color: cyan or black + Weight: 265g (0.58lbs)

SPECIFICATIONS

Big-V RimAero rim made from 6061-T-6 aluminum with a single hollow chamber for less weight and a rounded pro�le for a clean look. For front wheel use only.

The main reason for damaged Folding Tires is the wrong air pressure.

It applies to each tire: A too low pressure damages the tire.This is even more true for Folding Tires. Don´t rely on the thumb test.That won`t work out, because of the strong structure of the Folding Tire.Always be sure you have min. 6bar/90psi and maxi. 8bar/120psi.If you consider that, you´ll have long lasting fun with your MAC´s

FOLDING TIRE TREATMENT

-48-

Catalog 2012.indd 48 2/27/2012 9:43:04 PM

TIRE

BEARINGS

www.khebikes.com

KHE MAC2 Dirt (20 x 2,20") + Special dirt tread for more grip + 20 x 2,20" (55 mm) size + MAX 8 bar / 120 PSI + Weight: 363 g + Kevlar beaded + Improved traction + Special durable compound + Also available in size 24" and 26"

KHE MAC2 STREET (20 x 2,20") + Street version with stronger sidewall + 20 x 2,20" (55 mm) size + MAX 8 bar / 120 PSI + Weight: 424 g + Kevlar beaded + Improved traction + Special durable compound + Also available in 24" and 26"

KHE MAC2 PARK / FLAT(20 x 2,20") + Perfect size to use for Park riding on the rear/front wheel or for Flatland on front wheel + 20 x 2,20" (55 mm) size + MAX 8 bar / 120 PSI + Weight: 360 g + Kevlar beaded + Improved traction + Special durable compound

SPECIFICATIONS

KHEbikes sealed bearings + Available for: MidBB (pressed, for 19mm), USBB (with shell, pressed, for 19mm), SpanishBB (pressed, for 19mm), EuroBB (thread, for 19mm)

SPECIFICATIONS

MAC Folding TiresThe MAC tire is the “WORLD's First Freestyle Folding tire”!This is not just a new tire like all the others, this one changes the weight of the complete bike dramatically because it's less rotating mass at the end of the frame and at the same timeit strengthens a lot by using Kevlar material. Most tires blow up with big pressure and they get biger than labelled. The Kevlar strips hold everything in original shape and make thetire really, really light. This new tire is made of hard rubber and holds up to 120psi.

Sealed BBKHEbikes bottom brackets with sealed bearings. Available for di�erent bottom bracket sizes.

KHE MAC1.5 STREET (20 x 1,90") + Perfect to use for Street riding on the rear wheel with stronger sidewall + 20 x 1,90" (48 mm) size + MAX 8 bar / 120 PSI + Weight: 393 g + Kevlar beaded + Improved traction + Special durable compound

KHE MAC1.5 PARK / FLAT (20 x 1,90") + Perfect size to use for Park riding on the rear/front wheel or for Flatland on front wheel + 20 x 1,90" (48 mm) size + MAX 8 bar / 120 PSI + Weight: 298 g + Kevlar beaded + Improved traction + Special durable compound

KHE MAC1 FLAT (20 x 1.70") + Perfect size for Flatland + 20 x 1.70" (40 mm) size + Max 8 bar / 120 PSI + Kevlar beaded + Improved traction + Special durable compound + Also available in white

BOTTOM BRACKET INSTALLATION

The main reason for damaged Folding Tires is the wrong air pressure.

It applies to each tire: A too low pressure damages the tire.This is even more true for Folding Tires. Don´t rely on the thumb test.That won`t work out, because of the strong structure of the Folding Tire.Always be sure you have min. 6bar/90psi and maxi. 8bar/120psi.If you consider that, you´ll have long lasting fun with your MAC´s

FOLDING TIRE TREATMENT

Information about the installation, maintenance and warranty of a KHEbikes Astral hub.A. Check the bottom bracket after receiving for irregulari-ties (defect bearings, damaged thread).B. Keep your bill in case of complaints and warranty claims.C. US BB, Mid BB and Spanish BB bottom bracketsshould be pressed into the frame with grease.D. The Euro BB bottom bracket has a left handthread on the right side (mounting counterclockwise)and a legal thread on the left side.(Assembly clockwise) The bearing should be easyassembled with a greased thread.E. Assemble the inner spacer, washer and spacer inthe same order like the picture. You can vary thedistance of the cranks with the “extra spacer”.F. For installation of the bottom bracket use a 36mmopen-end wrench. Tight it with 50Nm.

Informationen über Einbau, Wartung und Gewährleistungen eines KHEbikes Innenlagers / Tretlagers.A. Überprüfe das Innenlager nach Erhalt auf Unregelmäßigkeiten(z.B. defekte Lager, beschädigtes Gewindeetc).B. Bewahre die Rechnung für Reklamationen undGewährleistungsansprüche auf.C. USBB, MidBB und SpanischBB Innerlager (Tretlager)sind mit Fett einzupressen.D. EuroBB Innenlager haben auf der rechten Seite einLinksgewinde (Montage gegen Uhrzeigersinn) undauf der linken Seite ein Rechtsgewinde. (Montageim Uhrzeigersinn) Das Innenlager sollte sich mitFett auf den Gewindegängen leicht montieren lassen.

E. Die Hülle, Unterlegscheiben und Abstandshaltermüssen wie in der Abbildung montiert werden. Mitden zusätzlich beiliegenden Spacern lässt sich derKurbelabstand variieren.F. Die Montage erfolgt mit einem 36er Maulschlüsselund muss mit 50Nm festgeschraubt werden.

-49-

Catalog 2012.indd 49 2/27/2012 9:43:10 PM

BEARINGS

SEAT

www.khebikes.com

Slide bearing set (IGUS) + Very lightweight, extreme wearout resistant + 19mm axles + side bearings + size: MidBB + Weight: 134g (0.294lbs)

SPECIFICATIONS

KHE Af�x Bush BB with sidebearingsThe KHEbikes Bush Bottom Bracket o�ers a lightweight and durable alternative to the classical sealed bearing BB through superior plastic bearing technology. NEW THIS YEAR: The KHE AFFIX BB come with a set of needle side bearing on the side which help overcoming the side friction when the crank is tight and greatly help the adjustement of the BB. The KHEbikes Bush Bottom Bracket is made of a proprietary composite material that combines high performance polymers with precise additions of �bers reinforcements and solid lubricants. Because of its intrinsic advantages, plastic bush bearings have replaced metal bearings in thousands of applications from all industries, ranging from medical devices to food processing, marine equipment, pumps and valves or automotive applications.ADDITIONAL INFOThe bush bearing is not a rolling bearing, it is a friction bearing (it is not rolling, it is sliding). This means there is more friction involved, the crank spin less than with a regular rolling bearing. BUT the coe�cient of friction changes with the load. As shown on the graphic in the slideshow, the coe�cient of friction highly decreases when the bush start to be loaded. The coe�cient of friction is changing to a value that to a large extent is constant.This means that when you start pedalling, the crank is a bit harder to turn, but when you ride, you do not feel any resistance anymore. In addition, when you are not pedalling, the pedals will not move by themselves as easy as with a rolling bearing. This means that on no footer or tailwhip variations the pedals will stay in place.

BUSH-BB INSTALLATION Notes regarding khebikes bush bb installation:- For better performances all surfaces needs to be clean and dry before assembly. - A single lubrication with Te�on or Silicon oil is highly recommended to improve the overall performances of the bush bearing. NEVER USE GREASE. (WD40 can be use as a temporary alternative) Please exercise caution when using lubrication in dirty environments. The lubricant can mix with hard dirt particles and form a grinding paste, resulting in acceleration of wear.- The crank needs to be tighten as needed: apply enough torque to remove all play from the crank while ensuring it still rotates freely. DO NOT OVER TIGHTEN otherwise the bush will be damaged.- Axle diameters vary about 0.05mm. The a�x BB �ts to the smallest diameter variation 19,00, otherwise some axles would be loose. If your axle has a slightly bigger axle diameter, you need to sand down inner side of the bearing with a 1200 grained sand paper. Work cautious, don’t grind more than necessary.

Exhib Seat / Post CombinationThe Exhib seat is a light and simple seat/post combination with perfect shape and position. The nylon seat is directly molded around a 6061 aluminum seat post. This manufacturing process assures an intimate bound between the seat and the post resulting in a very strong reliable assembly.Simple and functional, the EXHIB SEAT weighs less than your average seat alone and will allow you to substantially lower the weight of your bike without spending too much money!

SPECIFICATIONSNylon seat base + 25.4 mm (1") aluminum seatpost + Seat post length: 100mm + Color: black, transparent Weight: 166g / 0.365 lbs

-50-

Catalog 2012.indd 50 2/27/2012 9:43:16 PM

SEAT

www.khebikes.com

Dany SeatThe KHEbikes Dandy seat is a small Street, Dirt and Park saddle, with smart square seam.

SPECIFICATIONSColors: black, white + Weight: 308g / 0.679 lbs + CrMo rails + square seam

Pluma Seat/ Post CombinationThe Pluma seat is a signature saddle form Daniel Dhers is a light and simple seat/post combination with perfect shape and position. The padded seat is directly molded around a 6061aluminum seat post. This manufacturing process assures an intimate bound between the seat and the post resulting in a very strong reliable assembly.Simple and functional, the Pluma SEAT weighs less than your average seat alone and will allow you to substantially lower the weight of your bike without spending too much money!

SPECIFICATIONSpadded seat base + 25.4mm (1") aluminum seatpost + Seat post length: 100mm + Color: black-black base, white-black base, black blue-base and black grey-base + Weight: 274g / 0,60lbs

Loyal Seat/ Poast CombinationThe KHEbikes Loyal seat/seatpost combination is a lightweight saddle with aluminium seatpost.

SPECIFICATIONSColors: black, white and grey + Weight: 190g / 0.419lbs + padded seat base + 25.4 mm (1") aluminum seatpost + Seat post length: 100mm

Watanabe SeatThe KHEbikes Watanabe seat is one of the most popular �atland seat on the BMX market. Because it's super light weight saddle. The Watanabe has a ergonomic rubber grip in the back.We modi�ed the thickness of the rear plastic and rubber for a longer life time and better rail �xing.

SPECIFICATIONS with 8mm Cromoly rails + Weight 268 g /0.59 lbs (with Cr rails) + Plastic with ergonomic rubber grip back + Length approx 210 mm + Color: Black and white

-51-

Catalog 2012.indd 51 2/27/2012 9:43:25 PM

HUB

www.khebikes.com

Astern HubBruce Crisman´s new signature hub features the patented „easy adjust system“. It allows the gap to be changed instantly (with an allen key into the axle) without having to remove the hub from the frame.

SPECIFICATIONS9 T driver + ACB, Bush and sealed bearings + 14mm axle + CrMo hollow axle + 36H + Weight: 660 g / 1.433 lbs + Color: black or brown

Radio Eas HubThe KHE RADIO EAS Cassette uses 6 Claws, and also features our own developed 3/3 clutch system where the power force of three claws is alternated.So the system allows more power than any other hub. The most important thing is that there is a bearing where the main force and presure is working on: under the claws.Most BMX cassette hubs use bearings at the sprocket but none at the claws. Our KHE driver is featured with two smaller sealed bearings under the sprocket and one bigger bearingunder the claws + two sealed bearings inside the alloy hub body. What's the matter with EAS system?We have been working and testing our new axle system for quiet some time now “Equal Axle System” (EAS). It is a rather simple & hollow oversized axle in which it utilises speciallydesigned ends. The biggest problem generally faced in this area is that after a bolt brakes, the thread inside the axle can cause a problem. This is why we designed and developed ourown system. Our KHE designed adapters come with a larger �anges placed behind the dropout so that in any case of the axle breaking, our adapters can be easily replaced.Also, when clamping the hub on the fork, there is no side power getting on the bearing, it's absorbed by the adaptor �ange - so the bearings always glide perfectly and the hub canbe wedged really tight.

SPECIFICATIONSAvailable with 3/8” or 14mm axle + Weight: 450g / 15.873oz (14mm CrMo studs and nuts) + 9T driver (no other sizes available) + 36 or 48H + Color: black

Its di�cult for many riders to demount their bearings properly. The outcome can be a destroyed hub. To avoid that, we put together an instruction CHANGING HUB BEARINGS

1. Disassemble the nuts, the cone nuts and also the washer from the driver side.

5. Disassemble the cone nuts and the washer from the non-driver side.

8. On the top of the hub shell you see the bigger driver-side bearing.

2. The sprocket/driver must be removed by turns now. If the driver is stucked in the bearing, please use a tool. Leverage all around the driver to push it out.

6. Now you can take o� the non-driver side bearing.

9. Disassemble the bearings from the driver. Use a drift punch or something similar and put it from the backside into

7. Disassemble the bigger bearing from the driver side hub shell. Use a drift punch and put it from the non-driver side into the hub shell to hit the bearing

4. Now the axle is disassembled from the hub-shell.

3. Hold the hub with the driver side upwards. Take a plastic hammer and hit the axle carefully. The axle including the inner parts will come out of the hub shell slowly. Do not take a metal hammer, the axle will be destroyed. The only way getting the axle and the inner parts out of the hub is the former described way. The other way round will destroy parts of the Freecoaster.

10. Reassemble the hub step by step. Take care of the bearings; assemble the driver side hub shell bearings and the driver bearings only by hitting the outer ring. The non-driver side bearing must be reassembled to the axle by hitting the inner ring of the bearing.

-52-

Catalog 2012.indd 52 2/27/2012 9:43:32 PM

HUB

www.khebikes.com

Geisha MTB Freecoaster HubThe Geisha Free uses the simple threaded system. There are four sealed bearings, two under the driver and two big ones inside the alloy body. This makes the function mechanism realstrong and precise compared to normal ball bearing coasters. Inside the alloy hollow axle we use a new Spring Ball System pushing heat treated balls to the cone part. This way the cone runs on balls and not on scratching steel spring like other manufacturers use. Important was that the gap is adjustable so you have three pedal space possibilitiesthat can suit your style of riding. What's the matter with this EAS system?We have been working and testing our new axle system for quiet some time now “Equal Axle System” (EAS). It is a rather simple & hollow oversized axle in which it utilises speciallydesigned ends. The biggest problem generally faced in this area is that after a bolt brakes, the thread inside the axle can cause a problem. This is why we designed and developed ourown system. Our KHE designed adapters come with a larger �anges placed behind the dropout so that in any case of the axle breaking, our adapters can be easily replaced.

SPECIFICATIONS11T driver + �ts for 1/2" x 3/32” chain + axle for 135mm frame wide + �t for disc brake + 3/8" axle + 4 sealed bearings + available with 32H or 36H + color: gold + weight: 648g / 1.43lbs

Astral HubThe Astral hub is a radial hub, which is made of 6061 Aluminium. You can use these hub for Street, Dirt, Park and also Flatland.

SPECIFICATIONSmade of 6061 Aluminium + 36H + Axle Stud system + Comes with 10mm studs and 2 allen screw + Weight: 236g / 8.324oz + Color: annodized grey + allen screw

Information about the installation, maintenance and warranty of a KHEbikes Astral hub.A. Check the hub after receiving for irregularities (paintdamage, defective bearings etc).B. Keep your bill in case of complaints and warrantyclaims.C. For radial lasing use radial spokes and for crosslasing use cranked spokes.D. Assemble the hub like the picture. Use following order,from the inside to the outside: protection cap,stud or the washer from the allen screw, fork (dropouts),allen screw or the nut from the axle stud.E. Attention: Assemble the axle studs with 22Nm andthe allen screw/ the nut of the axle stud with 40Nm.F. If you like to change spokes, disassemble the allenscrew or the axle stud from the site you need andturn o� the protection cap.G. The allen screw have a 3/8" 26t thread.

Informationen über Einbau, Wartung und Gewährleistungen einer KHEbikes Astral Nabe.A. Überprüfe die Nabe nach Erhalt auf Unregelmäßig-keiten(z.B. Lackschäden, defekte Lager etc).B. Bewahre die Rechnung für Reklamationen undGewährleistungsansprüche auf.C. Das Radialeinspeichen erfordert gerade Speichenköpfe,beim Einspeichen über Kreuz benötigt mangekröpfte Speichen.D. Die Montage der Nabe erfolgt gemäß der Abbildung,d.h. von innen nach außen: Schutzkappen,Axle-Stud bzw. „dicke“ Unterlegscheibe der Inbusschraube,dann die Gabel (Ausfallenden) und danndie Inbusschraube mit extra Unterlegscheibe bzw.die Achsmutter des Studs.

ASTRAL INSTALLATION

Geisha Front HubThe Geisha front hub is made for Flatland. We placed the �anges closer together so there's more space to grab the fork.What's the matter with this EAS system?We have been working and testing our new axle system for quiet some time now “Equal Axle System” (EAS). It is a rather simple & hollow oversized axle in which it utilises speciallydesigned ends. The biggest problem generally faced in this area is that after a bolt brakes, the thread inside the axle can cause a problem. This is why we designed and developed ourown system. Our KHE designed adapters come with a larger �anges placed behind the dropout so that in any case of the axle breaking, our adapters can be easily replaced.Also, when clamping the hub on the fork, there is no side power getting on the bearing, it's absorbed by the adaptor �ange - so the bearings always glide perfectly and the hub can bewedged really tight.

SPECIFICATIONS36H + color: silver + weight: 246g / 0.54lbs + EAS + 3/8" axle

E. Achtung: Die Axlestuds der Astral Nabe werdenmit 22Nm und die Inbusschrauben bzw. die Achsmuttermit 40Nm montiert.F. Um eine Speiche zu ersetzten muss man auf der jeweiligenSeite, den Stud bzw. die Inbusschraube entfernenund kann dann die Schutzkappe abziehen.G. Die Inbusschraube hat ein 3/8" 26t Gewinde.

-53-

Catalog 2012.indd 53 2/27/2012 9:43:34 PM

HUB

www.khebikes.com

Geisha Light HubThe new lighter version of the Geisha freecoaster.

SPECIFICATIONSComes with 10 and 14 mm studs + 9T driver + 36H or 48H +Two di�erent colored washers + Axle Stud system + Weight: 548g / 1.208 lbs + Color: annodized grey

The purpose of adjusting the gap on a Freecoaster is to change the response/sensitivity of the hub to your needs.By removing some of the internal gap washers the amount of travel between turning the crank arm and the clutch engaging increases, this also means that when freecoasting backwards there is a greater amount of movement allowed in the cranks before the clutch engages.Also by increasing the amount of internal gap spacers the amount of travel between turning the crank arm and the clutch engaging decreases, this means that when freecoasting backwards there is a lesser amount of movement allowed in the cranks before the clutch engages.The Geisha Freecoaster is delivered with the longest reponse possible, the Geisha Street Freecoaster with the quickest response.To change the response, follow the instructions:ADJUST FREECOASTER GAP

7. Reassemble the hub step by step. Take care of the bearings, don´t hit the outer ring.

6. The delivered spacers can be assembled or assembled spacers can be disassembled now. The more spacer are assembled, the quicker the coaster

3. Hold the hub with the side where the sprocket was removed showing upwards.

1. Disassemble the axle adaptor.

2. The sprocket/driver must be removed by turns now.

4. Take a plastic hammer and hit the axle carefully. The axle including the Inner parts will come out of the hub shell slowly. Do not take a steel/metall hammer, the axle will be destroyed. The only way getting the axle and the inner parts out of the hub is the former described way. The other way round will will destroy parts of the freecoaster.

5. After the axle is removed the bearing must be disassembled. Disassemble the bearing carefully by pulling/pushing it at the inner ring.

Greyhound Adjustable HubKHEbikes Greyhound Adjustable freecoaster is a hub which allows you to change your freecoaster gap external by an „easy adjust system“ with an allen key into the axle.You don't have to disassemble the wheel from the frame. This hub is special for Street riding.

SPECIFICATIONS14mm CrMo hollow axle + external adjustable gap + 9T driver + 36H + ACB bearings and sealed bearings + colour: grey + weight: 632g / 1.39lbs

*NOTE: ADJUST FREECOASTER GAPSame Techsupport as Geisha Light Hub.

-54-

Catalog 2012.indd 54 2/27/2012 9:43:39 PM

HUB

www.khebikes.com

SPECIFICATIONS118mm female axle + CrMo inner axle + 3/8 bolt + bolt: 17mm wrench and 8mm allen key + bolt thread: 24 tpi + 9T driver + 36H + ACB bearings + colour: grey + weight: 574g / 1.27lbs

Greyhound Street HubKHEbikes Greyhound STREET freecoaster is the world �rst female freecoaster on the market. Never again any outstanding axles ends at our bike, cause of a easy assembling bolt system.The awesome weight is another positve e�ect from a nice female freecoaster hub.This hub is special for Street riding.

SPECIFICATIONSbolt cassette hub + 10/14mm axle + �ts in 14mm dropout + locked by a 10mm bolt + 118mm inner CrMo axle + 3/8 24 tpi CrMo bolt + loudly free wheel + 17mm wrench and 8mm allen key + 36H + colour: grey + weight: 360g

Greyhound Cassette Hub BoltGreyhound is the name from our new hub range, these nice and slim cassette hub comes with female bolts. Never again any outstanding axles ends at our bike, cause of a easy assembling bolt system. The awesome weight is another positve e�ect from a nice cassette female hub.


Greyhound Flat HubKHEbikes Greyhound FLAT freecoaster is the world �rst female freecoaster on the market. Never again any outstanding axles ends at our bike, cause of a easy assembling bolt system.The awesome weight is another positve e�ect from a nice female freecoaster hub.This hub is special for Flatland riding.

SPECIFICATIONS110mm female axle + 7075-T6 aluminum inner axle + 3/8 bolt + 17mm wrench and 8mm allen key + bolt thread: 24 tpi + 9T driver + 36H + ACB bearings + colour: grey + weight: 508g / 1.11lbs


-55-

Catalog 2012.indd 55 2/27/2012 9:43:44 PM

HUB

SPROCKET

www.khebikes.com

SPECIFICATIONSLimited Edition: 9T driver + sealed bearings + 1pc 14mm hollow CrMo axle + ACB berarings + Weight: 650g + Colors: black or grey + 36H + Available as RHD Reverse: 9T driver + sealed bearings + 14 mm hollow CrMo axle with allen key inside + 36H or 48H + Colors: black or white + Weight: 650g + Available as RSD or LSD

Reverse Limited Edition HubIn addition to of our new GREYHOUND hub line, we are still o�ering the classical REVERSE freecoaster. With the 1pc axle, ACB bearings and bushing in the driver, it is certainly thestrongest Freecoaster ever produced. With his 1pc 14mm hollow CrMo axle, this hub is as simple and straight forward as it gets. It is also an economic alternative to the newerGreyhound hubs. The hub is available in di�erent colour including our special Greyhound colour. Be quick, they are selling fast

Rotor Steel SprocketThe design of these steel sprocket based on the Aluminium Rotor sprocket. The KHE Rotor Steel Sprocket is perferct for our Root series, ST and AD bikes.

SPECIFICATIONSsize 25T + color: black or chrome + weight: 86g / 0.19lbs + made of steel + �ts for 1/2" x 3/32" chains


Greyhound Bolt Front HubGreyhound is the name from our new hub range, these nice and slim front hub comes with female bolts. Never again any outstanding axles ends at our bike, cause of a easy assembling bolt system. The awesome weight is another positve e�ect from a nice female hub.

SPECIFICATIONSbolt front hub + 10mm axle + 36H + 100mm 7075 Alu inner axle + 3/8 24 tpi CrMo bolt + 17mm wrench and 8mm allen key + colour: grey + weight: 180g

-56-

Catalog 2012.indd 56 2/27/2012 9:43:48 PM

SPROCKET

CHAIN

www.khebikes.com

Rotor Sprocket Our ROTOR sprockets are made in Germany from the �nest material to ensure the highest quality and guarantees extreme long life.Made in one of the leading manufacturer for high end motorcycles components, our sprockets are CNC machined using an exclusive process to cut the teeth."Diamond cut" is an innovative manufacturing process resulting in a visible higher quality sprocket than was ever possible on standard milled sprockets. Special tooling guarantees extremely low tolerances and a super accurate cutting surface. At the same time the material is highly condensed in the area of the teeth �anges whichwork-hardens the material and signi�cantly enhances durability. KHEbikes ROTOR sprockets are without doubt one of the most durable and strongest sprockets on the market.

SPECIFICATIONSHigh strength 7075-T6 Aluminium + CNC machined to tightest tolerances with exclusive ''Diamond Cut'' patented process which work-hardens the teeth and enhances durability + advanced tooth design for better support of the chain and super smooth running + hard anodized for extreme long life + made in Germany + accepts both 1/8 and 3/16 chains + Sizes: 18T, 20T, 25T, 28T, 30T , 33T , 36T + Weight: 25T (64g - 2.25oz ), 28T (76g - 2.68oz), 30T (86g - 3.03oz), 33T (110g - 3.88oz), 36T (122g - 4.30oz) + Color: hard anodized black

Hal�ink Chain KHE Hal�ink hollow pin: First hollow hal�ink chain for better weight! Each link protects the other link which makes them stronger for grinding.Hal�inks helps to adjust the backwheel. Straight link design on the outside for better grinding. Fits also with 9T drivers.

SPECIFICATIONSweight form: 310g / 0,68lbs + installation with a master pin + two sizes + color: black-chrom (89 links), white and chrome (100 links)Available in:basic hal�ink chain: 1/2" x 1/8" black-chrome, white ,chrome hollow hal�ink chain: 1/2“ x 3/32" (thin) black-chorme,hollow hal�ink chain: 1/2“ x 1/8" black-chorme

Tanga Chain KThe KHEbikes Tanga chain is a very lightweight chain made for �atland riding.

SPECIFICATIONSHollow pins + runs on 9T Geisha (light) freecoaster and cooperates perfectly with the 20T Ninja or Rotor sprocket + 1/2" x 3/32" chain (size taken from road racing) + Weight: 244g (0.53lbs) + Color: chrome

Tanga Light Chain The KHE Tanga light chain is a very lightweight chain made for �atland riding. The 1/2" x 3/32" size �ts perfectly to the KHE Rotor sprocket and the KHE Freecoaster driver.

SPECIFICATIONShollow pins + 1/2" x 3/32" size + weight: 235g / 0.5 lbs + color: chrome

-57-

Catalog 2012.indd 57 2/27/2012 9:43:54 PM

CRANK

www.khebikes.com

Hindenburg Aluminium Crank The KHEbikes Hindenburg Aluminium crank is a very durable Flatland crank.

SPECIFICATIONS3pc + 152mm or 165mm crank arm lenght + made of aluminium + 22mm CrMo spindle + color: black

Hindenburg Ti Flat Crank The KHEbikes Hindenburg Ti Flat crank is lightest �atland crank on the market. The design based on the Hindenburg CrMo. These short crank arms are briliant for �atland riding.

SPECIFICATIONS3pc crank + 160mm crank arm lenght + 19mm axle + 48t axle + made of titanium + color: raw ti-�nish + weight: 478g / 1.08lbs (without screws)

SPECIFICATIONS175mm square shape �utted CrMo arms + 48T - 19mm Titanium hollow spindle + Available in Black + (sold without BB) + Weight: 632g (without bolts)

Erlkoenig CrankKHEbikes introduces the �rst �uted CrMo crank arms. Developing our new Erlkoenig crank, we decided to go back to the basis and o�er a simple and strong 3pc crank with 48 splines spindle. No crazy welds or unnecessary gimmicks,just a classic crank based on a trusted design. Still we wanted to innovate and o�er more than a basic crank. The Erlkoenig crank is the �rst crank ever to feature �uted CrMo crank arms.Function and strength have been tested extensively in labs and by our riders. With improved squared shape, our exclusive crank arms are very sti�, solid and light.In addition, the Erlkoenig crank comes with a Ti6Al4V titanium hollow spindle (19mm), which results in the lightest crank set on the market. Like our Hindenburg 3pc crank in the past,the Erlkoenig crank is a very strong and light crank for a reasonable price.

CRANK INSTALLATION

IInformation about the installation, maintenance and warranty of a KHEbikes crank.A. Check the cranks after receiving for irregularities(dents, paint damage, defective welding seamsetc).B. Keep your bill in case of complaints and warrantyclaims.C. The crank’s diameter should match to the inner diameterof the bottom bracket’s bearing.D. At �rst stick the crank’s axle into the bearing.E. Screw the sprocket loosely on the right crankarm.F. Regulate the correct distance between crankarmsand chainstays and the chainline by putting thewasher on the crank´s axle.G. If necessary adapt the sprocket to axle by using anadapter and put on the crankarms.H. Pull the crankarm on axle by screwing on the crankbolt.I. At last tighten the sprocket screw at the crank’s axle.J. Ride on … your KHE Team!

Informationen über Einbau, Wartung und Gewährleistungen einer KHEbikes Kurbel.A. Überprüfe die Kurbel nach Erhalt auf Unregelmäßig-keiten (z.B. Beulen, Lackschäden, defekteSchweißnähte etc).B. Bewahre die Rechnung für Reklamationen undGewährleistungsansprüche auf.C. Der Durchmesser der Kurbelachse, muss mit demInnendurchmesser der Lagerung des Tretlagers /Innenlagers übereinstimmen.D. Zuerst die Kurbelachse in das Lager stecken.E Das Kettenblatt lose an rechten Kurbelarm (R)schrauben.F. Die beiliegenden Spacer werden zum Regulieren desrichtigen Absstandes zwischen Kurbelarmen undKettenstrebe und dem Verlauf der Kettenlinie auf dieAchse gesteckt.

G. Kettenblatt ggf. durch Adapter auf den Durchmesserder Tretlagerachse abstimmen und Kurbelarm aufstecken.H. Mittels der Kurbelschraube den Arm auf die Achseziehen. Achse unbedingt fetten!I. Zuletzt die Kettenblattschraube festziehen.

-58-

Catalog 2012.indd 58 2/27/2012 9:43:58 PM

PEDAL

GRIP

www.khebikes.com

SPECIFICATIONSAluminium pedal + made by CNC + CrMo axle + 9/16" thread + sealed bearing and bush bearing + assembling by allen key + color black + weight 370g

Alpha PedalsKThe KHE bikes Alpha pedal is our highend aluminium pedal, those pedal are very �at and also light. The Alpha pedal is made by CNC and comes with sealed bearings and bush bearings.

SPECIFICATIONSweight: 124g / 0.273 lbs per pair + double kraton rubber component grip + small diamond grip surface + length 147 mm+ color: black, white

Pyramid Lock-on GripThe KHEbikes Pyramid LockOn grips are made of double kraton rubber component, which are perfect for Street, Park, Dirt and also Flatland."LockOn" means, the grip can be �xed by clamps for a high comfort and stability grip.

SPECIFICATIONSWeight 139 g / 0.7 lbs per pair + double kraton rubber component grip + Small diamond grip surface + Includes PVC barends + Length 147 mm + Color: black,brown, grey + kind: with �anges and without �anges

Pyramid GripThe KHEbikes Pyramid grips are made of double kraton rubber component, which are perfect for Street, Park and Dirt riding with �anges and also perfect without �anges for Flatland.

SPECIFICATIONSAvailable in aluminium and magnesium + Weight: Alu BB (692g), Alu SB (698g), Mag BB (556g), Mag SB (556g) Color: Black

Construct PedalsA very strong Street pedal that comes in a unique design. The pins have a special design to prevent its damage while grinding.

SPECIFICATIONSDurable graphite plastic pedals for perfect balance and grip + CrMo cone axle + Size: 9/16" + Weight: 226 g / 0.5 lbs

Stimulatorz PedalsThe Stimulatorz are a re-designed from the MKS which was the best pedal ever made!

-59-

Catalog 2012.indd 59 2/27/2012 9:44:05 PM

PEG

SPOKES

www.khebikes.com

SPECIFICATIONSDouble butted DT Swiss spokes (1.8/1.6/1.8).Made from cold forged stainless steelExclusive bmx lengths: 181mm - 183mm - 185mm - 187mm - 189mm

Flexie SpokesMulti-Layer processed, plastic powder coated �exible spokes. Made especially for freestyle of extremely stretchable, elastic material. These spokes are more di�cult to break than general BMX spokes."I’ve never broke one." Jesse Puente

SPECIFICATIONSFlexible spokes with powder coating + Weight 218 g / 0.48 lbs per 50 pcIn 167, 179, 181, 183 & 232mm length + Flexible and strong materialSet of 50 pc including nipples + Powder coated in black or whiteMade for Freestyle

Aeon Pegs The AEON V2 peg is an ultra light heat-treated CrMo peg with internal ribs. The ribs save weight without decreasing strength or durability. One of the lightest street peg on the market.

SPECIFICATIONSHeat-treated 4130 CrMo + 95mm long with 34mm outer diameter + 14mm (include 10mm adapter) + Anti rotation pin with 8 possible peg positions 34mm diameter + colour: black + weight: 138g / 0.304 lbsSold individually!

Alchemy Pegs Extra lightweight peg made of plastic and glass �bre mix. Very durable, low frictional resistance on metal copings.NEW: Now more durable through extra strong steel inserts.

SPECIFICATIONSLength: 108mm + Diameter: 39mm + Regular version not suitable for beton curbs + also available with CrMo sleeve for rough surfaces + available for Flatland with grip tabe + Weight: 75g / 0.165lbs (1pc), CrMo: 142g / 0.313lbs (1pc) + color: black, raw CrMo

KHE DT-Swiss SpokesWith 60 years of experience in spoke production, DT-Swiss is the unquestionably the world’s leader in bicycle spoke technology. The spokes are manufactured in DT-Swiss home city of, Biel, Switzerland which is also the home of the world's most prestigious watch makers in the world like Rolex, Tag Heuer, and many others. In the longstanding tradition of Swiss clock-making, DT-Swiss is committed to precision manufacturing and high quality standards for timeless products. Designed with performance and longevity in mind, DT-Swiss spokes are made from high quality stainless steel using a special patented manufacturing process.Our DT-Swiss X KHE bikes spokes are double butted which means the spokes are thinner in the center than at each ends. Whereas most other spokes are pulled or drawn into their butted shapes, DT Swiss chose a unique cold forging technology to reduce the diameter of the spoke. Each DT spoke is rotary forged in order to improve the spoke microstructure and enhances its mechanical properties. This process results in better strength to weight ratio with improved elasticity for a more durable spoke. Because no detail is too small, everything in the spoke has been tailored in order to ensure the best performances and longevity. The thread is rolled this means that no material is removed and like cold forging, this process maximize the strength because the grain structure is hardened. DT-Swiss spokes are �nished in black using electroplating that allows for a durable �nish without weakening the spoke. Since 2008, KHEbikes is proud to be the worldwide exclusive distribution partner for DT-Swiss spokes in the bmx business.DT-Swiss X KHEbikes double butted spokes are now available in a wide range of size.All KHEbikes complete high-end wheelsets are assembled with double butted DT Swiss spokes.

-60-

Catalog 2012.indd 60 2/27/2012 9:44:08 PM

PARTS

www.khebikes.com

KHEbikes Pro BrakeKHEbikes Pro brake is cold forged and that makes them really sti�. These brake is also the �rst brake which comes with bush bearings.

SPECIFICATIONSclear brake pads + made of aluminium + bush bearings + color: grey anodized + weight: 160g / 0,35 lbs

Puncture ProofThese black tape is our KHEbikes Puncture Proof. You have to assemble it between the tubeand the tire. It saves your tube for sharp edges and pieces of glas. Good for street riding.

SPECIFICATIONS40mm wide + lenght �ts for 20" wheels + color: black + weight: 200g / 0,44lbs

Prismatic Seatpost The KHEbikes Prismatic seat post is a lightweight seat post. Shortened to save weight.

SPECIFICATIONSWeight: 198 g / 0.437 lbs (Street) or 220 g / 0.48 lbs (Flat)+Welded clamp + Diameter 25.4 mm ++Heat treated aluminium + Black anodized + Comes in 180 mm or 350 mm length, individually cuttable

Seat Clamp This is a small and decend seat clamp for KHEbikes.

SPECIFICATIONScolor: black + for 24.5mm seat post + for a 28,6 mm frame diameter + changeable nut thread + weight: 30g / 0,06lbs

Dubz ChainadjusterHigh quality chain tensionners which is designed by Bram Verhallen. The Dubz will even works when the peg runs 3 mm over the edge of the dropout!

SPECIFICATIONS�t for 20" x 1.75"- 2.25" + weight: 98g (0,26 lbs) + wall thickness: 0,6 mm + schrader valve

Twiggy TubeThe Twiggy tube is the lightes 20" tube on the market and it's perfect for riding Flatland.

SPECIFICATIONSMade of aluminium + Works with any combination - 10mm axle / 10mm dropout or 10mm axle / 14mm dropout or 14mm axle / 14mm dropout + 4mm up to 5.5mm thick dropouts + Weight 16g / 0.035Ibs + Color: black

-61-

Catalog 2012.indd 61 2/27/2012 9:44:15 PM

Catalog 2012.indd 62 2/27/2012 9:44:17 PM

Unicorn Bicycles Distribution 2012 Catalogue

Documents

Transcript of Unicorn Bicycles Distribution 2012 Catalogue