underwater lights limited€¦ · We are the founders (1991) and only manufacturers of the Original...

underwater lights limited TM

British Excellence in Lighting Product Designs and Manufacturing

“Don’t be fooled by imitations...if it doesn’t say ‘limited’ on the box,it’s not one of our lights.”

Our mission is to design and manufacture high-quality lighting products using the latest LEDs and electronic components available. Our R & D has enabled us to increase the efficiency of LED drivers circuits from 82% to 94% and thermally manage the lights to enhance the lifetime of our new Qt LED range.

We are the founders (1991) and only manufacturers of the Original underwater

lights™ brand. Peter Urquhart, President of Underwater Lights Limited™, is proud of the fact that the company designs and manufactures all of the underwater and conventional lights at it’s UK factory, enabling it to have full control of production.

Underwater Lights Limited™ is mainly recognized for its underwater lights but it has been involved in interior and exterior light designs for yachts such as M.Y Solemar, M.Y. Anna, M.Y. Palladium, M.Y. Serque and S.Y Hemisphere. All received prestigious awards.

Our past experience and knowledge of project lighting designs and manufacturing lights for the yachts mentioned above has led the company to create quality and practical luminaires for land and marine applications.

All the above would be worthless if Underwater Lights Limited™ could not provide a quality service to its customers and clients who are surprised at our after sales service which is now becoming a rarity in the industry.

Underwater Lights Limited™ is a distributor for Lutron lighting control and reseller for Nicolaudie.


Photos throughout the brochure courtesy of

MY Palladium © Michael MaynardMY Diamonds are Forever © Bugsy GedlekMY Lady Lola © Handler Photo IncMY Kismet © Klaus JordanMY Serque © Marc ParisMY Twizzle © Bugsy GedlekSY Maltese Falcon © George Gill

Glass lens: Wide beam, borosilicate glass

Classification: Lloyds approved tested IP X8 TO 8 bar

Material: 316L stainless steel & 5083 aluminium

Light output: 9,600 lumens

Lamp type: Flat LED chip

Lamp life: 40,000 hours @350C

Colour temp: 7,200K cool white

Voltage/amps: Supply 230vac, 0.5 Amp

Hole cut-out: To suit the selected insert

An adjustable LED ‘through-hull’ light for welding into aluminium and steel hulls.

Suitable for boats greater than 30 meters. The boat must be hauled out for installation.

Maintenance of the light is carried out from inside the hull. Dry docking is not necessary.

The ‘insert’ part, which is welded into the hull, can be used for LED or HID projectors.

The beam angle can be internally adjusted up to 15 degrees.

STEE

L &

ALU

MIN

IUM

HU

LLS

UN

DE

RW

AT

ER

LIG

HT

S

Qt LED 75 SA

Glass lens: Borosilicate glass

Classification: Lloyds approved / GL approvals

Material: 316L stainless steel & 5083 aluminium

Light output: 12,000 lumens for 150w 19,000 lumens for 250w

Lamp type: Metal halide 150w or 250w

Lamp life: 3000 hours

Colour temp: 7,000K

Voltage/amps: 150w 120/230,1.4 - 0.7A 250w 198/264vac

Hole cut-out: To suit the selected insert

An adjustable ‘through-hull’ light for welding into aluminium and steel hulls.



The ‘insert’ part, which is welded into the hull, can be used for LED or HID projectors.

On the ‘SA’ model, the beam angle can be internally adjusted up to 20 degrees.

There is no adjustment on the ‘Fixed’ model and the maximum power is 150 watts. STEE

L &

ALU

MIN

IUM

HU

LLS

UN

DE

RW

AT

ER

LIG

HT

S

UL Ti MATE 75 SA & FIXED


Classification: Lloyds approved tested IP X8 TO 8 bar.

Material: Aluminium bronze & 5083 aluminium

Light output: 9,600 lumens



Colour temp: 7,200K cool white

Voltage/amps: Supply 230vac, 0.5 Amp

Hole cut-out: 100mm

An adjustable LED ‘through-hull’ light suitable for GRP/fibre glass and timber hulls.



The beam angle can be internally adjusted up to 15 degrees.

FOR

CO

MPO

SITE

HU

LLS

UN

DE

RW

AT

ER

LIG

HT

S

Qt LED 130 SA


Classification: Lloyds approved tested IPX8 to 10 bar

Material: Aluminium bronze and 5083 aluminium

Light output: 12,000 lumens for 150w 19,000 lumens for 250w

Lamp type: Metal halide 150w or 250w

Lamp life: 3000 hours

Colour temp: 7,000K

Voltage/amps: 150w 120/230,1.4 - 0.7A 250w 198/264vac

Hole cut-out: 100mm

FOR

CO

MPO

SITE

HU

LLS

UN

DE

RW

AT

ER

LIG

HT

S

An adjustable ‘through-hull’ light for welding into aluminium and steel hulls.



On the ‘SA’ model, the beam angle can be internally adjusted up to 20 degrees.

There is no adjustment on the ‘Fixed’ model and the maximum power is 150 watts.

UL Ti MATE 130 SA & FIXED


Classification: Lloyds approved tested IP X8 TO 8 Bar.

Material: Aluminium bronze & 5083 aluminium

Light output: Standard 5,500 lumens



Colour temp: 7,200K cool white, rgb and other colours also available

Voltage/amps: 24vdc, 3.3 Amps

Hole cut-out: 61mm

FOR

CO

MPO

SITE

HU

LLS

UN

DE

RW

AT

ER

LIG

HT

S

An LED ‘through-hull’ light suitable for GRP/fibre glass and timber hulls.

Suitable for boats up to 30 meters. The boat must be hauled out for installation.


There are options for the LED colour and power.

Qt LED 80


Classification: Lloyds approved tested IPX8 to 10 bar

Material: Aluminium bronze and 5083 auminium

Light output: Xenon 4,800 lumens, halogen 750 lumens, LED 1,400 lumens

Hole cut-out: 61mm

Lamp types: 55W xenon bulb, 100W halogen, 20W LED

Lamp life: 3000 hours xenon, 2000 hours halogen, 30,000 hours LED

Colour temp: 7,000K xenon. 3000K halogen, 7,200K LED

Voltage/amps: Xenon12/24vdc, 6.4A/2.5A halogen 12/24vdc, 8.3A/4.2A LED 12/24vdc, 1.6A/0.8A

FOR

CO

MPO

SITE

HU

LLS

UN

DE

RW

AT

ER

LIG

HT

S

Our most popular ‘through-hull’ light suitable for GRP/fibre glass and timber hulls.

Suitable for boats up to 30 meters. The boat must be hauled out for installation.


Lamp options include Xenon, Halogen and LED.

The Xenon version can be fitted with a wide angle filter.

UL Ti MATE 80

Lighting Design

underwater lights limited™ impressive product portfolios has enabled it to become increasingly involved in design and lighting solutions for both interior and exterior lighting designs of superyachts.

We use Lutron dimming control systems so the lights can be programmed to suit individual requirements and allows total control of a wide variety of lighting scenarios.

Over the years, we have worked closely with designers and owners to create outstanding personalized lighting design for yachts such as M.Y Solemar, M.Y Anna, M.Y Serque, M.Y Palladium and S.Y Hemisphere which helped them to win Awards.

Interior & Exterior

underwater lights limited™ constantly expands the ‘Cute in Size Big on Light’ philosophy and continues to manufacture new LED products. The Qt LED range is suitable for land, marine, residential and commercial applications.

Our continuous commitment to research and development allows you to be on the green side of power conservation but stylish in the final installation.

The Qt LED range can adapt the latest inventions of the day without modifications to the light fitting.

Options for LED power, colours, lenses and remote phosphor filters can be fitted to get the exact effect you want.

Classification: Tested IP 67 front and IP 44 rear

Bezel finish: Polished 316 stainless steel Other finishes available on request

Light output: Standard 100 lumens, Qt LED 42i up to 250 lumens also available

Lamp type: Single LED light,

Colour: Cool white, warm white, blue, green and red

Lens finish: Clear

Hole cut-out: Qt 42i 27.5mm Qt 32 28mm Qt 34 29mm

Small adjustable and fixed LED lights suitable for interior and exterior illumination.

Qt LED 32 is a fixed side-emitting light, ideal for step, emergency and accent lighting.

Qt LED 34 is an adjustable interior light, ideal for emergency and accent lighting.

Qt LED 42i is a fixed down light with an integral driver.

FOR

INTE

RIO

RS

AN

D E

XTE

RIO

RS

SM

AL

L L

ED

LIG

HT

S Qt LED 32, 34, 42i

Classification: Tested IP 67 front and IP 44 rear

Bezel finish: Polished 316 stainless steel Other finishes available on request

Light output: Standard 100 lumens, Qt LED 44i up to 250 lumens, Qt LED 44iS up to 310 lumens

Lamp type: Single LED light

Colour: Cool white, warm white, blue, green and red

Lens finish: Clear

Hole cut-out: 40mm

A small multi-purpose adjustable LED light for interior and exterior illumination.

The housings are available in a variety of materials and finishes to suit every application.

Qt LED 44 IS has an integral driver and a stirrup for surface mounting.

Qt LED 44 I has an integral driver. Ideal for installation into walls, ceilings and stairs.

Qt LED 44 is provided with a remote driver. Ideal for installation into walls, ceilings and stairs.

Acetal and metal inserts can be fitted to the Qt 44 I and Qt 44 lights to increase the rear IP rating.

FOR

INTE

RIO

RS

AN

D E

XTE

RIO

RS

SM

AL

L L

ED

LIG

HT

SQt LED 44iS, 44i, 44

Classification: Tested IP 67

Bezel finish: Polished 316 stainless steel. Other material & finishes available on request

Light output: Standard up to 1,400 lumens


Colour: Cool white, warm white

Lens finish: Clear lens

This is a multi-use exterior/interior surface mounted light.

There are lens options for flood and spot lighting.

Adjustment of the light is done via a ball joint or stirrup type fixing.

Options for the LED light source include colour, RGB and power.

Suitable for architectural, garden and security lighting.

FOR

INTE

RIO

RS

AN

D E

XTE

RIO

RS

LE

D D

EC

K L

IGH

TS

Qt LED 60-3


Bezel finish: Polished 316 stainless steel. Other material & finishes available on request

Light output: Standard up to 1,400 lumens, 5,600 lumens also available


Colour: Cool white, RGB and other colours available

Lens finish: Clear lens

Qt LED 88 is an underwater light designed for swimming pools.

Options for the LED light source include colour, RGB and power.

The standard 25 watt 2,100 lm light has an integral driver.

For the RGB and high powered LEDs the driver is remote.

FOR

SW

IMM

IMG

PO

OLS

LE

D D

EC

K L

IGH

TS

Qt LED 88 SWIMMING POOL

Qt LED 76-3

Qt LED 76-8


Colour: Cool white, warm white Helideck: red, yellow, blue & green

Lens finish: Clear borosilicate glass Helideck: acrylic lens


Bezel finish: 5083 Aluminium or 316 stainless steel Other Material & finishes available on request

Light output: Up to 1,400 lumens Helideck: up to 750 lumens

Qt 76 Adjustable and Fixed LED light for exterior and interior applications.

The Qt-LED 76 is a versatile adjustable or fixed LED light with optional integral driver.

Qt-LED 76-1 is an adjustable light for low level, down and accent lighting.

Qt-LED 76-2 is adjustable. An insert provides water tight integrity for use in exposed areas.

Qt-LED 76-3 is a fixed light with phosphor filter or lens. Ideal for down lighting.

Qt-LED 76-8 Helideck indicator light is designed to meet CAP 437 rules.

The helideck insert maintains deck integrity when the light is removed, this is a classification

requirement when refueling the helicopter.

FOR

FLO

OD

LIG

HTI

NG L

ED

& H

EL

IDE

CK

LIG

HT

S

Qt LED 76-3, 76-8

Classification: Tested IP 66 front, rear IP 56

Bezel finish: Polished 316 stainless steel bolted / screwed

Light output: Up to 12,000 lumens for 150W, halogen lamp: up to 1,200 lumens

Lamp type: PAR 30: 150W HID lamp or halogen Others: MR16 halogen - max 50W LED option on request

Lens finish: Clear or frosted 4mm / 15mm

Inserts: Aluminium or stainless steel

The PAR 30 is a powerful adjustable light for exterior flood lighting onto areas such as decks or masts.

The bolted bezel houses a 15mm thick glass for installation into exposed areas and requires an insert.

For down lighting a 4mm thick glass with a screwed bezel is also available.

S3052 is a medium power adjustable light ideal for low level and down lighting.

The light is available with a bolted bezel for exposed areas or a screwed bezel for less exposed areas.

Weld-in inserts are recommended for installation into areas exposed to heavy weather.

FOR

FLO

OD

LIG

HTI

NG

DE

CK

LIG

HT

S

FLOOD LIGHTS

underwater lights limited™ has often been asked to assist in the design of bespoke lights for both land and sea applications.

All of the bespoke lights are specially made and produced in our own factory in the UK to suit all individual requirements.

Whilst many of our competitors outsource their manufacturing, we are able to oversee the material purchased and control the production and the design.

The lights are handmade, generally from textured glass and designed to complement the interior or exterior designs.

Some of these lights have been installed into Award winning yachts and luxurious chalets in Courchevel (France) and a listed building in Newcastle (UK).

Bespoke Lighting

THE AGE OF ENLIGHTENMENT


Manufacturer of the Original Brand Marine Lighting Products Since 1991

UK Design & Head Office

Tel: +44 (0) 1732 455753

Fax: +44 (0) 1732 743233

www.underwaterlights.com

[email protected]

www.qtled.com

[email protected]

underwater lights limited€¦ · We are the founders (1991) and only manufacturers of the Original...

Documents

Transcript of underwater lights limited€¦ · We are the founders (1991) and only manufacturers of the Original...