Ultrasonic Transducers - 1718.com.cn · transducers, and eddy current instruments and probes. ......

July 2002 Edition

UltrasonicTransducers

AgfaNDT.com

General Information

Krautkramer—The World LeaderKrautkramer is the world’s largest designer, manufacturer, and marketer of high technologyinstruments and transducers for ultrasonic nondestructive testing (UT). Our products include flawdetectors, thickness gauges, hardness testers, inspection systems, UT software, ultrasonictransducers, and eddy current instruments and probes. Krautkramer is a division of Emerson Electricand has worldwide manufacturing and product support bases. Our main manufacturing centers are inLewistown, Pennsylvania, USA, and Cologne, Germany. We also have direct facilities in Japan, UnitedKingdom, France, and Italy, as well as worldwide representatives. All of our direct facilities and manyof our representative facilities have full service capabilities. A full list of worldwide representatives isavailable from Krautkramer or on the Internet at www.krautkramer.com.

Ultrasonic Transducers for Every ApplicationKrautkramer offers over 4000 standard and special ultrasonic transducers and accessories forvirtually every application. This catalog describes our extensive range of standard transducers andrelated accessories. For applications that require a non-standard product, we proudly offer the mostcomprehensive special probe and applications services available anywhere. Refer to the SpecialProbes and Applications section of this catalog for more information.

Fast DeliveryBecause we know that fast delivery is a must for most of our customers, we stock over 500 of thecommonly used products in this catalog. If your first choice is not available from stock, a productspecialist can often recommend a suitable substitute. When not available from stock, most standardproducts in this catalog can be shipped in less than two weeks. As a certified Class A MRPIImanufacturer, Krautkramer employs state-of-the-art control systems and manufacturing methods toassure timely delivery of a reliable product.

The Best Quality and ServiceOur quality program is certified to the international quality standardISO-9001. This enables Krautkramer to quickly serve the marketplacewith products of exceptional quality and value. Krautkramer’scommitment to providing the very best customer service is evidencedby ongoing investments in manufacturing technology and productivityenhancing capital equipment.

New ProductsNumerous products are included in this catalog for the first time. Below are a few of the most important ones:

• Look for new Benchmark Series probes throughout the catalog. Made with proprietaryBENCHMARK COMPOSITE® active elements, they offer incredible penetration and excellentresolution. Refer to the Transducer Performance section of the catalog for more information.

• Use new XLC Extended Life Contact probes for long service life in the most abusive applications.• Try the new K-PEN 20 MHz pencil type probe on parts with sharp curves or limited access.• Use the HT400A high temperature probe to test materials at temperatures to 1000°F.• Save time and money with FASTTM probes, designed for high speed, manual weld scanning.

1

Table of Contents

How to Order ........................................ 1

Transducer PerformanceAlpha Series Features...................... 2Benchmark Series Features ............. 2Gamma Series Features .................. 2Frequency Color Coding ................... 2

Contact TransducersRHP Style Standard ......................... 3XLC Style Extended Life ................... 3F Style Fingertip .............................. 4

Delay Line Contact TransducersDFR Style Removable Delay ............. 4K-PEN Pencil Type Probe .................. 5ZIP Probes ...................................... 5

Protective Face Contact TransducersPFCR/PFCS Combination Styles ....... 6PMCR/PMCS Membrane Styles ........ 7PWCCR/PWCCS Styles .................... 8

Angle Beam TransducersSWS/AWS Styles, Gamma ............... 9SWS/AWS Styles, Benchmark ........ 10

Miniature Angle Beam TransducersMSW-QC Quick Change, Gamma..... 11MSW-QC, Alpha & Benchmark ........ 12MSWS Style (Captive Screws) ........ 13ABFP Style (Potted Wedge) ............. 14SMSWS Style (Subminiature) ......... 14

Fingertip Dual Element TransducersADP Style (Potted Cable) ................ 15RC Dual Style (Replaceable Cable) . 15FDU Style (Replaceable Cable) ....... 15

High Temperature Dual Element TransducersHT400A (to 1000° F) ..................... 15KBA560V (to 750° F) ..................... 15

Standard Dual Element TransducersDU Style (Replaceable Delay) ......... 16DU-F Style, Benchmark Series ........ 16FASTTM Probes ............................... 16

Immersion TransducersISS/IS Styles ................................ 17IPS/IR Styles ................................ 18Velocity System Transducers .......... 19Near Field and Focusing Information . 19

Thickness Gauging TransducersPrecision Gauging .......................... 20Dual Element Corrosion Gauging .... 21

Special Probes and Applications LaboratorySpecial Probes & Applications ........ 22Phased Array Transducers .............. 23Inquiry Form.................................. 24

AccessoriesCables/Adaptors/Search Tubes ..... 25Couplants ..................................... 26Test Blocks ................................... 27

Transducer Certification ...................... 29

Tables and Formulas ........................... 30

Transducer Kits............. Inside Back Cover

How To Order• Order by Product Code: Tables on each page give Product Codes by frequency, size, and style.• Phone: (717) 242-0327. Ask for the Sales Department. After hours, use our voice mail system.• Fax: (717) 242-2606• Mail: Sales Department, Krautkramer, 50 Industrial Park Road, Lewistown, PA 17044• Contact your local Sales Representative: See our site on the web at www.krautkramer.com or call

our Sales Department• If you need assistance: Call (717) 242-0327 and ask for a Transducer Product Specialist.• VISA and MasterCard accepted in North America when you order through our Lewistown, PA office.

Page Page

2

Transducer PerformanceKrautkramer offers three series of transducers: Alpha, Gamma, and new Benchmark. To determinewhich of these series is best for your application, please read the technical information on this page.If you need assistance, contact one of our Transducer Product Specialists (717-242-0327) or your localsales representative. Real time waveform and frequency certification is included with every transducerat no charge (refer to the Technical Information section for details).

)zHM(ycneuqerF 05. 0.1 52.2 05.3 00.5 00.01

roloC yarG deR wolleY eulB neerG kcalB

• Recommended for applications where resolution is the primary consideration.• Suitable for applications such as thickness measurement and near-surface

flaw detection.• Very short pulse—mechanically damped to the limit of current technology.• Gain is usually lower than that of the Gamma and Benchmark Series.• Broadband—typical 6 dB bandwidths range from 50% to 100%.• Typical Alpha waveforms (right) exhibit one to two full ring cycles, depending

on frequency, size and other parameters.

• Proprietary BENCHMARK COMPOSITE® (piezocomposite) active elements.• Penetration in attenuative materials is far superior to conventional transducers.• High signal to noise on coarse grain metals, fiber reinforced composites, et al.• Short pulse—resolution usually superior to Gamma Series.• Gain is usually higher than that of the Gamma and Alpha Series.• Very broadband—typical 6 dB bandwidths range from 60% to 120%.• Low acoustic impedance element improves performance of angle beam,

delay line, and immersion probes—excellent match to plastic and water.

• General purpose transducers, recommended for the majority of applications.• Medium pulse, medium damping—best combination of gain and resolution• Matching electrical network ensures maximum gain and optimum waveform

for general use.• Medium bandwidth—typical 6 dB bandwidths range from 30% to 50%.• Typical Gamma waveform exhibits three to four full ring cycles, depending on

frequency, size and other parameters.

For easy identification of frequency, most Krautkramer transducers are color coded as follows:

3

Contact TransducersSingle Element Contact Transducers are longitudinal wave transducers designed for general purposemanual ultrasonic inspection where test materials are relatively flat and smooth. Contact transducersprovide high sensitivity for better penetration and are ruggedly constructed for extended service lifeunder the roughest testing conditions.

tnemelEretemaiD

A B

005. 51.1 05.1

057. 04.1 05.1

000.1 56.1 05.1

Standard Contact Transducers—RHP and XLC Styles

RHP and XLC Style ContactsStandard Contact Transducers are designed for abusive “scrubbing”applications. Gamma series are for applications where sensitivity andpenetration are essential. Alpha series have maximum bandwidth foraxial resolution. RHP style probes feature ceramicwearplates for the best combination of acoustic matchingand durability and stainless steel housings to resistcorrosion. New XLC (Extended Life Contact) style probeshave special, high durability wearplates for the mostabusive applications. Both styles feature an improvedcomfort grip and color band for frequency identification.CR models have right angle mounted BNC connectorsand the CS models have top-mounted BNC connectors.

.qerF)zHM(

eziS).ni(

SEDOCTCUDORP

seirosseccAelytS

ahplAseireS

ammaGseireS

5.

057.PHRPHR

RC-340-052SC-321-052

selbaC

CNB'6610-C

OMEL'6810-C

00.1PHRPHR

RC-340-062SC-321-062

0.1

005.PHRPHR

RC-340-142SC-321-142

057.PHRPHR

RC-340-152SC-321-152

00.1

PHRPHRCLXCLX

RC-340-162SC-321-162RC-050-162SC-051-162

52.2

005.

PHRPHRCLXCLX

RC-340-241SC-321-241

RC-340-242SC-321-242RC-050-242SC-051-242

057.

PHRPHRCLXCLX

RC-340-251SC-321-251

RC-340-252SC-321-252RC-050-252SC-051-252

00.1

PHRPHRCLXCLX

RC-340-261SC-321-261

RC-340-262SC-321-262RC-050-262SC-051-262

.qerF)zHM(

eziS).ni(

SEDOCTCUDORP

elytSahplAseireS

ammaGseireS

seirosseccA

5.3

005.

PHRPHRCLXCLX

RC-340-342SC-321-342RC-050-342SC-051-342

selbaC

CNB'6610-C

OMEL'6810-C

057.

PHRPHRCLXCLX

RC-340-352SC-321-352RC-050-352SC-051-352

00.1

PHRPHRCLXCLX

RC-340-362SC-321-362RC-050-362SC-051-362

0.5

005.PHRPHR

RC-340-441SC-321-441

RC-340-442SC-321-442

057.PHRPHR

RC-340-451SC-321-451

RC-340-452SC-321-452

00.1PHRPHR

RC-340-461SC-321-461

RC-340-462SC-321-462

0.01 005.PHRPHR

RC-340-642SC-321-642

4

Contact TransducersSingle Element Contact Transducers are longitudinal wave transducersdesigned for general purpose manual ultrasonic inspection where testmaterials are relatively flat and smooth. Contact transducers providehigh sensitivity for better penetration and are ruggedly constructedfor extended service life under the roughest testing conditions.

F Style ContactF Style Contact transducers are small diameter fingertip probeswith a right angle mounted Microdot connector. Gamma Seriesare recommended for applications where high sensitivityand penetration are essential. Alpha Series are designedfor optimum damping and resolution. Benchmark Series,with Benchmark Composite® elements, are best forpunching through highly attenuative materials.

tnemelEretemaiD

A B

052. 05. 66.

573. 36. 66.

005. 57. 66.

.qerF)zHM(

eziS).ni(

SEDOCTCUDORP.qerF)zHM(

eziS).ni(

SEDOCTCUDORP

kramhcneBseireS

ahplAseireS

ammaGseireS

seirosseccAkramhcneB

seireSahplAseireS

ammaGseireS

seirosseccA

52.2

052. 000-228 000-221 000-222

selbaC

CNB'6210-C

OMEL'6220-C

0.5

052. 000-428 000-421 000-422

selbaC

CNB'6210-C

OMEL'6220-C

573. 000-238 000-231 000-232 573. 000-438 000-431 000-432

005. 000-248 000-241 000-242 005. 000-448 000-441 000-442

5.3

052. 000-321 000-322

0.01

052. 000-621 000-622

573. 000-331 000-332 573. 000-631 000-632

005. 000-341 000-342 005. 000-641 000-642

Fingertip Contact Transducers—F Style

DFR Style Removable Delay Line Contact

DFR Style Removable Delay Line Fingertip Transducers are specificallydesigned for thickness gauging and flaw detection of thin materials.High frequency and critical damping results in a high performancetransducer, which exhibits excellent resolution capability. All DFR StyleTransducers have right angle mounted Microdot connectors.

tnemelEretemaiD

A B C

ro521.052.

15. 538. 03.

005. 578. 573.1 595.

RFD-iniM

521. 14. 567. 91.

.qerF)zHM(

eziS).ni(

SEDOCTCUDORP

ahplAseireS

eniLyaleDgL"83.KP-01

eniLyaleDgL"5.KP-01 seirosseccA

52.2052. 066-221 050-D 150-D

selbaC

CNB'6210-C

OMEL'6220-C

eniLyaleDtnalpuoC

047-DX

gnirpSdedaoL

EEVkcolB*700-H

005. 005-041 250-D

5.3 052. 066-321 050-D 150-D

0.5052. 066-421 050-D 150-D

005. 066-441 250-D

0.01052. 066-621 050-D 150-D

005. 06-041 2 250-D

0.51 052. 066-721 050-D 150-D

0.22 521. 066-811 050-D 150-D

0.52 052. 066-921 050-D 150-D

RFD-iniM0.02 521. 056-815 205-DM

Removable Delay Line—DFR Style

*H-007 fits .125² and .25² units only with exception of Mini DFR.

5


K-PEN Replaceable Delay Line Pencil ProbeK-PEN's are high resolution pencil type probes. They aredesigned for applications requiring an extremely smallcontact area, such as tightly curved surfaces of turbineblades or remaining wall thickness measurements from apit bottom. They can be used with most flaw detectors,precision thickness gauges, and general pulser / receiverunits. Probes come with interchangeable delay tips that aretapered to a .065" and .090" contact diameter.Replacement delays are available in packs of 10. Thestraight model fetures a removable handle, which alsoallows it to be used as a fingertip probe. All models haveMicrodot connectors.

.qerF)zHM(

SEDOCTCUDORP

thgiartSNEP-K

°54NEP-K

elgnAthgiRNEP-K

yaleDpiT"560.KP-01

yaleDpiT"090.KP-01

CNB'6elbaC

5.7 002-240-983 088-240-983 078-240-983901-300-783 011-300-783 210-C

0.02 092-030-983 072-140-983 066-040-983

ZIP Probes for Testing Composite and OtherAttenuative Plastics

Zero Inter face (ZIP) Probes are highly damped, lowfrequency delay line transducers designed for compositeinspection. ZIP delay lines are acoustically matched tomost composite and other plastic materials. Thiseliminates or minimizes the delay line inter face echo,significantly improving near surface resolution. The lowfrequency characteristics of ZIPs make them excellent forpenetrating thick or highly attenuative cross-sections.ZIPs can also be used on many smooth surfacedmaterials without couplant.

.qerF)zHM(

eziS).ni(

TCUDORPSEDOC

SEDOCTCUDORP

selbaC eniLyaleD

54.0 00.1 031-065CNB'6610-C

170-D

5.1 005. 131-065 CNB'6210-C

270-D

52.2 573. 231-065 370-D

Zero Interface Probes (ZIP)

K-PEN Probes

6

Contact TransducersSingle Element Contact Transducers are longitudinal wavetransducers designed for general purpose manual ultrasonicinspection where test materials are relatively flat and smooth.Contact transducers provide high sensitivity for betterpenetration and are ruggedly constructed for extendedservice life under the roughest testing conditions.

PFCR and PFCS Style ContactsThe Protective Face Combination transducers are designedto allow one basic transducer to be used with three differenttypes of protective face: membrane, wear cap, or delay line. Allmodels have BNC connectors, PFCR are right angle mount andPFCS are top-mount.

Style PM Kit includes a knurled ring, gland nut, wrench, 12membranes, and a 2 oz. bottle of couplant (transducer not included).

Style PWC Kit includes a knurled ring, three wear caps, and a2 oz. bottle of couplant (transducer not included). This optionmay not be usable if near surface resolution is critical.

Style PHTD Kit includes a knurled ring, either 1″ or 1.5″ long hightemperature delay line, and a 2 oz. bottle of couplant (transducer not included).

.qerF)zHM(

eziS).ni(


eziS).ni(

SEDOCTCUDORP

seireSammaGelytSRCFP

seireSammaGelytSSCFP

seireSammaGelytSRCFP

seireSammaGelytSSCFP

0.1

005. 042-142 062-142

5.3

005. 042-342 062-342

057. 042-152 062-152 057. 042-352 062-352

00.1 042-162 062-162 00.1 042-362 062-362

521.1 042-172 062-172

52.2

005. 042-242 062-242

0.5

005. 042-442 062-442

057. 042-252 062-252 057. 042-452 062-452

00.1 042-262 062-262 00.1 042-462 062-462

521.1 042-272 062-272

Protective Face Combination Transducers—PFCR / PFCS Style

Protective Face Option Kits—PFCR / PFCS

* High Temp (PHTD) delay line: maximum temperature 400°F,maximum contact time 10 seconds; cool to ambient before reuse.

tiKelytS

SEDOCTCUDORP

retemaiDtnemelErecudsnarT

"005. "057. "00.1 "521.1

MP 021-KP 041-KP 061-KP 081-KP

CWP 022-KP 042-KP 062-KP 082-KP

*)yaleD"1(DTHP 023-KP 043-KP 063-KP 083-KP

*)yaleD"5.1(DTHP 024-KP 044-KP 064-KP 084-KP

Accessories—PFCR / PFCSSEDOCTCUDORP

retemaiDtnemelErecudsnarT

"005. "057. "00.1 "521.1

senarbmeMerapS.scp21fo.gkP 020-MP 120-MP 220-MP 320-MP

spacraeWerapS.scp21fo.gkP 321-CP 221-CP 121-CP 021-CP

*eniLyaleD.pmeT-iHgnoL"0.1

720-DP 130-DP 530-DP 930-DP

*eniLyaleD.pmeT-iHgnoL"5.1

920-DP 330-DP 730-DP 140-DP

elbaCCNB'6 610-C

&paCraeW,enarbmeMtnalpuoCeniLyaleD 047-DX

tnemelEretemaiD

A B C

005. 57. 02.1 49.

057. 00.1 02.1 91.1

000.1 52.1 02.1 44.1

521.1 83.1 53.1 75.1

7

.qerF)zHM(

eziS).ni(


eziS).ni(

SEDOCTCUDORP

seireSammaGsenarbmeM

nezod1seirosseccA seireSammaG

senarbmeMnezod1

seirosseccA

0.1

005.RCMP-142-142SCMP-162-142

020-MP

selbaCCNB'6610-C

OMEL'6810-C

enarbmeMtnalpuoC

047-DX

5.3

005.RCMP-142-342SCMP-162-342

020-MP

selbaCCNB'6610-C

OMEL'6810-C

enarbmeMtnalpuoC

047-DX

057.RCMP-142-152SCMP-162-152

120-MP 057.RCMP-142-352SCMP-162-352

120-MP

00.1RCMP-142-162SCMP-162-162

220-MP 00.1RCMP-142-362SCMP-162-362

220-MP

521.1RCMP-142-172SCMP-162-172

320-MP

52.2

005.RCMP-142-242SCMP-162-242

020-MP

0.5

005.RCMP-142-442SCMP-162-442

020-MP

057.RCMP-142-252SCMP-162-252

120-MP 057.RCMP-142-452SCMP-162-452

120-MP

00.1RCMP-142-262SCMP-162-262

220-MP 00.1RCMP-142-462SCMP-162-462

220-MP

521.1RCMP-142-272SCMP-162-272

320-MP

Protective Membrane Transducers—PMCR/PMCS Style


tnemelEretemaiD

A B

005. 31.1 57.1

057. 14.1 57.1

000.1 36.1 57.1

521.1 36.1 57.1

PMCR and PMCS Style ContactsProtective Membrane Contact Transducers areexcellent for coupling to rough or uneven sur faces.The membrane will conform to surfaceirregularities providing better coupling to the testmaterial. PMCR and PMCS Style contacts aredesigned for quick, easy membrane replacementand have color-coded grips identifying transducerfrequency. The PMCR Style has right angle BNCconnectors while the PMCS Style has straighttop-mount BNC connectors.

8

tnemelEretemaiD

A B

005. 0.1 21.1

057. 52.1 21.1

000.1 05.1 21.1

Protective Wear Cap/Delay Line Transducers—PWCCR/PWCCS


PWCCR and PWCCS Style Contacts

Protective Wear Cap Contact Transducers haveexpendable wear caps which are easily replacedwhen worn. This means unlimited economy whenthe job calls for “scrubbing” which would normallydestroy a standard contact probe. The PWCCRStyle has right angle mounted BNC connectorswhile the PWCCS Style has straight top-mount BNCconnectors. High temperature delay lines are alsoavailable for applications to 400°F.

.qerF)zHM(

eziS).ni(

SEDOCTCUDORP

.qerF)zHM(

eziS).ni(

SEDOCTCUDORP

ammaGseireS

paCraeWtiK.cp01

yaleDTH*tiKeniL seirosseccA

ammaGseireS

paCraeWtiK.cp01

yaleDTH*tiKeniL seirosseccA

0.1

005.RCCWP-052-142SCCWP-072-142 122-CP

"1-050-KP"5.1-060-KP

selbaC

CNB'6610-C

OMEL'6810-C

paCraeWtnalpuoC

047-DX

5.3

005.RCCWP-052-342SCCWP-072-342 122-CP

"1-050-KP"5.1-060-KP

selbaC

CNB'6610-C

OMEL'6810-C

paCraeWtnalpuoC

047-DX

057.RCCWP-052-152SCCWP-072-152 142-CP

"1-070-KP"5.1-080-KP 057.

RCCWP-052-352SCCWP-072-352 142-CP

"1-070-KP"5.1-080-KP

00.1RCCWP-052-162SCCWP-072-162 162-CP

"1-090-KP"5.1-001-KP 00.1

RCCWP-052-362SCCWP-072-362 162-CP

"1-090-KP"5.1-001-KP

52.2

005.RCCWP-052-242SCCWP-072-242 122-CP

"1-050-KP"5.1-060-KP

0.5

005.RCCWP-052-442SCCWP-072-442 122-CP

"1-050-KP"5.1-060-KP

057.RCCWP-052-252SCCWP-072-252 142-CP

"1-070-KP"5.1-080-KP 057.

RCCWP-052-452SCCWP-072-452 142-CP

"1-070-KP"5.1-080-KP

00.1RCCWP-052-262SCCWP-072-262 162-CP

"1-090-KP"5.1-001-KP 00.1

RCCWP-052-462SCCWP-072-462 162-CP

"1-090-KP"5.1-001-KP

* High Temp (HT) Delay Line: maximum temperature 400°F, maximum contact time 10 seconds; cool to ambient before reuse.

9

SWS and AWS Style Angle Beam, Gamma Series

SWS and AWS Style Angle Beam Transducers are designedto fit on removable wedges. Refracted shear wave anglesmay be specified as required. The AWS series aredesigned to meet or exceed all of the requirementsoutlined in AWS Structural Welding Code D1.1. AllSWS and AWS transducers utilize captive screws forfastening the probe to the wedge and have top-mountBNC connectors. High temperature wedges are fortemperatures up to 400° F.

Angle Beam TransducersAngle Beam Transducers are single or dual elementtransducers designed for weld inspection or flawdetection where flaws have an angular orientationwith respect to the material surface. Weldinspections are performed using shear wavesrefracted from a longitudinal wave by means of alucite wedge. Lucite wedges are designed toproduce shear waves of a particular angle in aspecified material with minimal wedge noise.

tnemelEeziS

A B C D

.aid05. 27. 0.1 57. 18.

0.1x05. 527. 15.1 57. 13.1

0.1x57. 00.1 5.1 57. 13.1

.aid0.1 22.1 56.1 57. 83.1

526.x526. 527. 52.1 57. 00.1

057.x526. 527. 52.1 57. 00.1

057.x057. 58. 52.1 57. 00.1

.qerF)zHM(

eziS).ni(


eziS).ni(

SEDOCTCUDORP

ammaGseireS

dradnatSegdeW

pmeT-iH*egdeW seirosseccA ammaG

seireSdradnatS

egdeWpmeT-iH*egdeW seirosseccA

5. aiD0.1 006-062

°54120-W°06220-W°07320-W°09520-W

°54180-W°06280-W°07380-W

selbaC

CNB'6610-C

OMEL'6810-C

egdeWtnalpuoC

047-DX

52.2SWAseireS

36.x36. 306-292°54401-W°06501-W°07601-W

selbaC

CNB'6610-C

OMEL'6810-C

egdeWtnalpuoC

047-DX

0.1

aiD5. 006-142

°54900-W°06010-W°07110-W°09310-W

°54670-W°06770-W°07870-W

57.x36. 106-292

°54401-W°06501-W°07601-W

1x5. 006-192

°54510-W°06610-W°07710-W°09910-W

°54070-W°06680-W°07170-W 57.x57. 406-292

°54401-W°06501-W°07601-W

1x57. 506-192

°54150-W°06250-W°07-350-W°09450-W

5.3

aiD5. 006-342

°54900-W°06010-W°07110-W°09310-W

°54670-W°06770-W°07870-W

aiD0.1 006-162

°54120-W°06220-W°07320-W°09520-W

°54180-W°06280-W°07380-W

1x5. 006-392

°54510-W°06610-W°07710-W°09910-W

°54070-W°06680-W°07170-W

52.2

aiD5. 006-242

°54900-W°06010-W°07110-W°09310-W

°54670-W°06770-W°07870-W 1x57. 506-392

°54150-W°06250-W°07-350-W°09450-W

1x5. 006-292

°54510-W°06610-W°07710-W°09910-W

°54070-W°06680-W°07170-W

aiD0.1 006-362

°54120-W°06220-W°07320-W°09520-W

°54180-W°06280-W°07380-W

1x57. 506-292

°54150-W°06250-W°07350-W°09450-W

0.5

aiD5. 006-442

°54900-W°06010-W°07110-W°09310-W

°54670-W°06770-W°07870-W

aiD0.1 006-262

°54120-W°06220-W°07320-W°09520-W

°54180-W°06280-W°07380-W

1x5. 006-492

°54510-W°06610-W°07710-W°09910-W

°54070-W°06680-W°07170-W

1x57. 506-492

°54150-W°06250-W°07350-W°09450-W

aiD0.1 006-462

°54120-W°06220-W°07320-W°09520-W

°54180-W°06280-W°07380-W

Standard Angle Beam—SWS and AWS Styles, Gamma Series

* Duty Cycle: at 400°F, maximum contact time is 10 seconds; cool toambient before reuse.Note: Standard wedge angles are specified for carbon steel.

10

Angle Beam TransducersAngle Beam Transducers are single or dual elementtransducers designed for weld inspection or flaw detectionwhere flaws have an angular orientation with respect tothe material surface. Weld inspections are performedusing shear waves refracted from a longitudinal wave bymeans of a lucite wedge. Lucite wedges are designed toproduce shear waves of a particular angle in a specifiedmaterial with minimal wedge noise.

SWS and AWS Style Angle Beam, Benchmark SeriesBenchmark series SWS and AWS Style Angle Beam Transducers feature proprietary BENCHMARKCOMPOSITE® active elements. They are available in the same range of sizes and fit the sameremovable wedges as the Gamma series. Benchmark series offer a superior combination ofsensitivity, resolution, and penetration for punching through highly attenuative materials. They areespecially beneficial when signal to noise ratio is a problem, for example coarse grain materials andfiber reinforced composites. The AWS models meet all requirements of Structural Welding Code D1.1.

SEDOCTCUDORP SEDOCTCUDORP

.qerF)zHM(

eziS).ni(

kramhcneBseireS

dradnatSegdeW

seirosseccA.qerF)zHM(

eziS).ni(

kramhcneBseireS

dradnatSegdeW

seirosseccA

0.1

aiD5. 006-148

°54900-W°06010-W°07110-W°09310-W

selbaC

CNB'6610-C

OMEL'6810-C

egdeWtnalpuoC

047-DX

5.3

aiD5. 006-348

°54900-W°06010-W°07110-W°09310-W

selbaC

CNB'6610-C

OMEL'6810-C

egdeWtnalpuoC

047-DX

1x5. 006-198

°54510-W°06610-W°07710-W°09910-W

1x5. 006-398

°54510-W°06610-W°07710-W°09910-W

1x57. 506-198

°54150-W°06250-W°07-350-W°09450-W

1x57. 506-398

°54150-W°06250-W°07-350-W°09450-W

aiD0.1 006-168

°54120-W°06220-W°07320-W°09520-W

aiD0.1 006-368

°54120-W°06220-W°07320-W°09520-W

52.2

aiD5. 006-248

°54900-W°06010-W°07110-W°09310-W

0.5

aiD5. 006-448

°54900-W°06010-W°07110-W°09310-W

1x5. 006-298

°54510-W°06610-W°07710-W°09910-W

. 1x5006-498

°54510-W°06610-W°07710-W°09910-W

1x57. 506-298

°54150-W°06250-W°07350-W°09450-W

1x57. 506-498

°54150-W°06250-W°07350-W°09450-W

aiD0.1 006-268

°54120-W°06220-W°07320-W°09520-W

aiD0.1 006-468 °54120-W°06220-W°07330-W°09520-W

52.2SWAseireS

36.x36. 306-298°54401-W°06501-W°07601-W

57.x36. 106-298°54401-W°06501-W°07601-W

57.x57. 406-298°54401-W°06501-W°07601-W

Standard Angle Beam—SWS and AWS Styles, Benchmark Series

Note: Standard wedge angles are specified for carbon steel.

11

Angle Beam TransducersAngle Beam Transducers are single or dual element transducersdesigned for weld inspection or flaw detection where flaws havean angular orientation with respect to the material surface.Weld inspections are performed using shear waves refractedfrom a longitudinal wave by means of a lucite wedge. Lucitewedges are designed to produce shear waves of a particularangle in a specified material with minimal wedge noise.

MSW-QC Style Angle Beam, Gamma Series

MSW-QC Style are miniature angle beam trans-ducers thatscrew directly into our “Quick Change” Lucite wedges. AllMSW-QC transducers have top-mount Microdot connectors.Gamma series utilize conventional monolithic ceramicelements and are recommended for regular inspection ofnon-attenuative materials.10.0 MHz MSW-QCtransducers are availableonly in Gamma series.

"52.egdeWelbaecalpeR "573.egdeWelbaecalpeR "05.egdeWelbaecalpeR

egdeWelgnA

A B C D EegdeWelgnA

A B C D EegdeWelgnA

A B C D E

°54°06°07°09

54.54.54.54.

57.48.00.159.

73.44.05.05.

14.14.14.14.

74.74.74.74.

°54°06°07°09

55.55.55.55.

98.40.191.151.1

74.55.85.16.

65.65.65.65.

05.05.05.05.

°54°06°07°09

07.07.07.07.

50.142.114.193.1

55.46.86.37.

07.07.07.07.

26.26.26.26.


Miniature Angle Beam Transducers—MSW-QC Style

.qerF)zHM(

eziS).ni(


eziS).ni(

SEDOCTCUDORP

ammaGseireS

dradnatSegdeW seirosseccA ammaG

seireSdradnatS

egdeW seirosseccA

0.1 005. 095-142

°03012-W°54112-W°06212-W°07312-W°09412-W

selbaC

CNB'6210-C

OMEL'6220-C

egdeWtnalpuoC

047-DX

5.3.tnoc 005. 095-342

°03012-W°54112-W°06212-W°07312-W°09412-W

selbaC

CNB'6210-C

OMEL'6220-C

egdeWtnalpuoC

047-DX

5.1

573. 095-132

°03022-W°54122-W°06222-W°07322-W°09422-W

0.5

052. 095-422

°03002-W°54102-W°06202-W°07302-W°09402-W

005. 595-142

°03012-W°54112-W°06212-W°07312-W°09412-W

573. 095-432

°03022-W°54122-W°06222-W°07322-W°09422-W

52.2

052. 095-222

°03002-W°54102-W°06202-W°07302-W°09402-W

005. 095-442

°03012-W°54112-W°06212-W°07312-W°09412-W

573. 095-232

°03022-W°54122-W°06222-W°07322-W°09422-W

01

052. 095-622

°03002-W°54102-W°06202-W°07302-W°09402-W

005. 095-242

°03012-W°54112-W°06212-W°07312-W°09412-W

573. 095-632

°03022-W°54122-W°06222-W°07322-W°09422-W

5.3

052. 095-322

°03002-W°54102-W°06202-W°07302-W°09402-W

005. 095-642

°03012-W°54112-W°06212-W°07312-W°09412-W

573. 095-332

°03022-W°54122-W°06222-W°07322-W°09422-W

12

Angle Beam TransducersAngle Beam Transducers are single or dual element transducersdesigned for weld inspection or flaw detection where flaws havean angular orientation with respect to the material surface.Weld inspections are performed using shear waves refractedfrom a longitudinal wave by means of a lucite wedge. Lucitewedges are designed to produce shear waves of a particularangle in a specified material with minimal wedge noise.


MSW-QC Style Angle Beam, Benchmark and Alpha Series

Benchmark and Alpha series MSW-QC Miniature Angle Beam Transducers are available inthe same range of sizes and fit the same standard “Quick Change" wedges as the Gamma series.Their one-piece stainless steel case insures long service life. All MSW-QC probes are color coded byfrequency and have top mounted Microdot connectors.

Benchmark series probes feature proprietary BENCHMARK COMPOSITE® active elements. They offer asuperior combination of sensitivity, resolution, and penetration for punching through highly attenuativematerials. They are especially beneficial when signal to noise ratio is a problem, for example coarsegrain materials and fiber reinforced composites. Alpha series MSW-QC probes are made with highlydamped monolithic ceramic elements and are recommended when very short pulse lengths arerequired for axial resolution.

.qerF)zHM(

eziS).ni(


eziS).ni(

SEDOCTCUDORP

kramhcneBseireS

ahplAseireS

dradnatSegdeW seirosseccA kramhcneB

seireSahplAseireS

dradnatSegdeW seirosseccA

0.1 005. 195-142 195-141

°03012-W°54112-W°06212-W°07312-W°09412-W

selbaC

CNB'6210-C

OMEL'6220-C

egdeWtnalpuoC

047-DX

5.3.tnoc 005. 195-342 195-341

°03012-W°54112-W°06212-W°07312-W°09412-W

selbaC

CNB'6210-C

OMEL'6220-C

egdeWtnalpuoC

047-DX

5.1

573. 695-132 695-131

°03022-W°54122-W°06222-W°07322-W°09422-W

0.5

052. 195-422 195-421

°03002-W°54102-W°06202-W°07302-W°09402-W

005. 695-142 695-141

°03012-W°54112-W°06212-W°07312-W°09412-W

573. 195-432 195-431

°03022-W°54122-W°06222-W°07322-W°09422-W

52.2

052. 195-222 195-221

°03002-W°54102-W°06202-W°07302-W°09402-W

005. 195-442 195-441

°03012-W°54112-W°06212-W°07312-W°09412-W

573. 195-232 195-231

°03022-W°54122-W°06222-W°07322-W°09422-W

5.7

052. 195-522 195-521

°03002-W°54102-W°06202-W°07302-W°09402-W

005. 195-242 195-241

°03012-W°54112-W°06212-W°07312-W°09412-W

573. 195-532 195-531

°03022-W°54122-W°06222-W°07322-W°09422-W

5.3

052. 195-322 195-321

°03002-W°54102-W°06202-W°07302-W°09402-W

005. 195-542 195-541

°03012-W°54112-W°06212-W°07312-W°09412-W

573. 195-332 195-331

°03022-W°54122-W°06222-W°07322-W°09422-W

Miniature Angle Beam Transducers—MSW-QC Style

13

Angle Beam TransducersAngle Beam Transducers are single or dual elementtransducers designed for weld inspection or flawdetection where flaws have an angular orientationwith respect to the material sur face. Weld inspectionsare per formed using shear waves refracted from alongitudinal wave by means of a lucite wedge. Lucite wedgesare designed to produce shear waves of a particular anglein a specified material with minimal wedge noise.

"52.egdeWelbaecalpeR "05.egdeWelbaecalpeR

elgnA A B C D E F elgnA A B C D E F

°54 74. 06. 03. 13. 84. 43. °54 37. 69. 24. 65. 37. 05.

°06 74. 56. 53. 13. 84. 43. °06 37. 80.1 05. 65. 37. 05.

°07 74. 07. 83. 13. 84. 43. °07 37. 61.1 45. 65. 37. 05.

°09 74. 09. 83. 13. 84. 43. °09 37. 65.1 85. 65. 37. 05.

MSWS Style Angle BeamMSWS Angle Beam Transducers are designed to fitremovable lucite wedges. Refracted shear wave anglesmay be specified as required. All MSWS transducershave captive screws for fastening the probe to the wedgeand are fitted with Microdot connectors. High temperaturewedges are for use at temperatures up to 400°F.

.qerF)zHM(

eziS).ni(


eziS).ni(

SEDOCTCUDORP

ammaGseireS

dradnatSegdew

pmeT-iH*egdeW

seirosseccAammaGseireS

dradnatSegdeW

pmeT-H*egdeW

seirosseccA

0.1 005. 085-142

°54040-W°06240-W°07440-W°08640-W°09840-W

°54850-W°06950-W°07060-W

selbaCCNB'6210-C

OMEL'6220-C

egdeWtnalpuoC

047-DX

0.5

052. 085-422

°54820-W°06030-W°07230-W°08430-W°09630-W

°54550-W°06650-W°07750-W

selbaCCNB'6210-C

OMEL'6220-C

egdeWtnalpuoC

047-DX

52.2

052. 085-222

°54820-W°06030-W°07230-W°08430-W°09630-W

°54550-W°06650-W°07750-W 005. 085-442

°54040-W°06240-W°07440-W°08640-W°09840-W

°54850-W°06950-W°07060-W

005. 085-242

°54040-W°06240-W°07440-W°08640-W°09840-W

°54850-W°06950-W°07060-W

0.01

052. 085-622

°54820-W°06030-W°07230-W°08430-W°09630-W

°54550-W°06650-W°07750-W

5.3

052. 085-322

°54820-W°06030-W°07230-W°08430-W°09630-W

°54550-W°06650-W°07750-W 005. 085-642

°54040-W°06240-W°07440-W°08640-W°09840-W

°54850-W°06950-W°07060-W

005. 085-342

°54040-W°06240-W°07440-W°08640-W°09840-W

°54850-W°06950-W°07060-W

Miniature Angle Beam Transducers—MSWS Style

14

snoisnemiDegdeW

elgnA A B C D E F

°54 13. 52. 12. 91. 32. 82.

°06 13. 24. 12. 91. 32. 82.

°07 13. 24. 12. 91. 32. 82.

°09 13. 27. 43. 91. 32. 82.

Angle Beam Transducers

tnemelEsnoisnemiD

A B C

781.x781. 23. 07. 75.

52.x52. 05. 0.1 55.

.qerF)zHM(

eziS).ni(

SEDOCTCUDORP

°54 °06 °07 °09 seirosseccA

52.2781.x781. 046-292 146-292 246-292 346-292

selbaC

CNB'6210-C

OMEL'6220-C

052.x052. 026-292 126-292 226-292 326-292

0.5781.x781. 046-492 146-492 246-492 346-492

052.x052. 026-492 126-492 226-492 326-492

01781.x781. 046-692 146-692 246-692 346-692

052.x052. 026-692 126-692 226-692 326-692

Fingertip Potted Angle Beam Transducers—ABFP Style

SMSWS Style Angle BeamSMSWS Angle Beam Transducers are subminiature transducers designed tofit removable lucite wedges. Refracted shear wave angles may be specifiedas required. All SMSWS transducers have standard screws for fastening theprobe to the wedge and have top-mount miniature Microdot connectors.

Note: Part numbers above are for carbon steel. For aluminum, specify frequency, size,and refracted angle in aluminum.

.qerF)zHM(

eziS).ni(

SEDOCTCUDORP

ammaGseireS

dradnatSegdeW

seirosseccA

52.2 521. 585-212

°54021-W°06121-W°07221-W°09321-W

elbaCCNB'6740-C

egdeWtnalpuoC

047-DX

0.5 521. 585-412

°54021-W°06121-W°07221-W°09321-W

0.01 521. 585-612

°54021-W°06121-W°07221-W°09321-W

Subminiature Angle Beam—SMSWS Style


Angle Beam Transducers are single or dual element transducersdesigned for weld inspection or flaw detection where flaws have anangular orientation with respect to the material surface. Weldinspections are per formed using shear waves refracted from alongitudinal wave by means of a lucite wedge. Lucite wedges aredesigned to produce shear waves of a particular angle in a specifiedmaterial with minimal wedge noise.

ABFP Style Angle BeamABFP Style, fingertip, fixed angle, shear wave transducers are available in standard angles forinspecting steel and aluminum. Custom angles for other materials may be special ordered. Their smallsize makes them ideal for weld inspection in restricted access areas. All ABFP Transducers areequipped with right angle Microdot connectors. Top mounted connectors may be special ordered.

15

Dual Element TransducersDual Element Contact Transducers are longitudinalwave transducers with a split element; one halffunctions as a transmitter while the other functions asa receiver. Each half-element is angled slightly towardthe other forming the “roof” angle. This “roof” angleeffectively focuses the sound beam. These trans-ducers are excellent for thin range flaw detection andthickness gauging. Because they have a discretetransmitter and receiver, better signal to noise ratiosare achieved compared to single element transducers.

ADP, RC, and FDU Style Dual Element

Dual Element Transducers are for general flawdetection and thickness gauging on materials withirregular or pitted surfaces. The ADP and RC modelsare color coded for quick frequency identification. Thelow profile ADP model has a potted BNC cable. The RCDual models have a 4-pin LEMO connector whichallows for quick and easy cable replacement. All FDUmodels have mini Microdot threaded connectors. Allmodels may be contoured to fit ID and OD curvatures.

tnemelEretemaiD

A B C

052. 05. 46. 63.

573. 36. 46. 74.

005. 57. 86. 06.

qerF)zHM(

eziS).ni(

SEDOCTCUDORP qerF)zHM(

eziS).ni(

SEDOCTCUDORP

lauDPDA *lauDCR †lauDUDF lauDPDA *lauDCR †lauDUDF

52.2

052. 007-222 186-222 086-222

0.5

052. 007-422 186-422 086-422

573. 007-232 186-232 086-232 573. 007-432 186-432 086-432

005. 007-242 186-242 005. 007-442 186-442

5.3

052. 007-322 186-322 086-322 5.7 573. 007-531

573. 007-332 186-332 086-332

005. 007-342 186-342

tnemelEretemaiD

A B

052. 83. 05.

573. 05. 05.

ADP/RC

Fingertip Dual Element Transducers—ADP/RC/FDU Styles

.qerF)zHM(

eziS).ni(

SEDOCTCUDORP

ledoMammaGseireS

seirosseccA

0.5

052. A004TH 067-422

selbaCCNB'6

201-C:dradnatS101-C:deromrA

573. V065ABK 032-445elbaCCNB'6760-C

*Duty Cycle: KBA560V—750°F, maximum contact time is 10 seconds;HT400A—1000°F, maximum contact time is 5 seconds; cool toambient before reuse.

HT400A

KBA560V

High Temperature Transducers*

HT400A and KBA560V Style HighTemperature Dual Element Transducers

HT400A and KBA560V models areavailable with replaceable BNC cables andcan be used for both flaw detectionand thickness gauging applications.Model HT400A can be usedintermittently on materials up to1000º F. Model KBA560V canbe used intermittently onmaterials up to 750ºF.

FDU

* Standard BNC Cable (C-088) or Heavy Duty BNC Cable (C-089) sold separately† Standard BNC Cable (C-014) sold separately

16

Dual Element TransducersDual Element Contact Transducers are longitudinal wave transducerswith a split element; one half functions as a transmitter while theother functions as a receiver. Each half-element is angled slightlytoward the other forming the “roof” angle. This “roof” angleeffectively focuses the sound beam. These transducers are excellentfor thin range flaw detection and thickness gauging. Because theyhave a discrete transmitter and receiver, better signal to noise ratiosare achieved compared to single element transducers.

DU Style Dual Element

DU Dual Element Transducers with replaceabledelays are excellent general-purpose probes forapplications with flat or curved surfaces. HighTemperature delays are also available forinspections at temperatures up to 400°F. All DUtransducers have standard Microdotconnectors for easy replacement.

tnemelEeziS

A B C

005.x005. 57. 58. 87.

00.1x005. 83.1 29. 87.

DU-F Style Dual Element, Benchmark SeriesBenchmark series DU-F Style Dual Element Transducersfeature proprietary BENCHMARK COMPOSITE® activeelements. Benchmark series offer a superiorcombination of sensitivity, resolution, andpenetration for punching through highlyattenuative materials. They are especiallybeneficial when signal to noise ratio is aproblem, for example coarse grain materialsand fiber reinforced composites. Closetolerance, integral delays assure consistentper formance.

FASTTM Probes for Rapid Manual Weld Inspection

Benchmark series FASTTM Probes are dual, high angle,longitudinal wave probes with proprietaryBENCHMARK COMPOSITE® elements. They areprimarily for inspection using the FASTTM methoddeveloped by SPIN (LLC). FASTTM high speed,manual weld scanning can reduce inspectioncosts for fabrication shops, field weldingorganizations,or any industry that per forms in-service NDE of components. For a detailedProduct Bulletin, contact our sales department.

* Duty Cycle: at 400°F, maximum contact time is 10 seconds; cool toambient before reuse.

.qerF)zHM(

eziS).ni(

SEDOCTCUDORP

ammaGseireS

yaleDteS

yaleDTH*teS

seirosseccA

0.15.x5. 057-192 026-SD 027-SD

elbaCCNB'6420-C

tnalpuoC047-DX

1x5. 047-192 046-SD 047-SD

52.25.x5. 057-292 026-SD 027-SD

1x5. 047-292 046-SD 047-SD

0.55.x5. 057-492 026-SD 027-SD

1x5. 047-492 066-SD 067-SD

Standard Dual Element Transducers—DU Style

.qerF)zHM(

eziS).ni(

SEDOCTCUDORP

kramhcneBseireS

seirosseccA

52.25.x5. 157-292

elbaCCNB'6420-C

1x5. 147-292

0.55.x5. 157-492

1x5. 147-492

DU-F Style—Benchmark

ledoM.qerF)zHM(

lufesUhtpeD

TCUDORPSEDOC

1TSAF 0.5 "6.0ot"0 088-610-983

2TSAF 0.5 "5.1ot"0 009-610-983

3TSAF 0.5 "4ot"5.0 087-610-983

FASTTM Probes

17

Immersion TransducersSingle Element Immersion Transducers are longitudinal wavetransducers typically used in manual, semi-automatic, andautomatic scanning systems. Scanning parts with irregular orcomplex geometries is possible because of the conforming“water path” layer between the probe and the inspected material.Superior near-surface resolution can be achieved when comparedto contact transducers. Angle beam inspection is possible bysimply angling the probe or search tube in relation to the partsurface. Spherical (point) or cylindrical (line) focusing can also beaccomplished using acoustically matched lenses. Focal lengthmust be specified.

tnemelEretemaiD

A B

052. 36. 55.1

573. 36. 55.1

005. 36. 55.1

057. 0.1 77.1

00.1 52.1 28.1

ISS and IS Style ImmersionISS and IS Immersion Transducers are for general ultrasonic immersion inspections requiring elementdiameters between .25″ and 1.0″. Available in Alpha, Gamma, and BENCHMARK COMPOSITE® series,they can be focused for critical applications to improve near-surface resolution or sensitivity to smalldiscontinuities. All ISS and IS Transducers have waterproof UHF connectors. Waterproof BNCconnectors may be specialordered. Gamma Series arerecommended forapplications where highsensitivity and penetrationare required. Alpha Series(where available) aredesigned for optimumdamping and resolution.New Benchmark Series(where available), withBENCHMARK COMPOSITE®

elements, offer a superiorcombination of sensitivity,resolution, and penetrationfor punching through highlyattenuative materials.

* Focus: S = Spherical; C = Cylindrical, N = Non-focus.Focal length must be specified. For available focallengths, see table at the end of the ImmersionTransducers section.Note: Waterproof cables are available in Accessories Section.

.qerF)zHM(

eziS).ni(


eziS).ni(

SEDOCTCUDORP

sucoF*ahplAseireS

ammaGseireS

kramhcneBseireS

sucoF*ahplAseireS

ammaGseireS

kramhcneBseireS

0.1

052.SCN

082-122092-122003-122

0.5

052.SCN

082-421092-421003-421

082-422092-422003-422 003-428

573.SCN

082-132092-132003-132

573.SCN

082-431092-431003-431

082-432092-432003-432

082-438092-438003-438

005.SCN

082-142092-142003-142

005.SCN

082-441092-441003-441

082-442092-442003-442

082-448092-448003-448

057.SCN

063-152073-152083-152

057.SCN

063-451073-451083-451

063-452073-452083-452

063-458073-458083-458

00.1SCN

063-162073-162083-162

063-168073-168083-168

00.1SCN

063-461073-461083-461

063-462073-462083-462

063-468073-468083-468

52.2

052.SCN

082-221092-221003-221

082-222092-222003-222 003-228

01

052.SCN

082-621092-621003-621

082-622092-622003-622

573.SCN

082-231092-231003-231

082-232092-232003-232 003-238

573.SCN

082-631092-631003-631

082-632092-632003-632

005.SCN

082-241092-241003-241

082-242092-242003-242

082-248092-248003-248

005.SCN

082-641092-641003-641

082-642092-642003-642

057.SCN

063-251073-251083-251

063-252073-252083-252

063-258073-258083-258

057.SCN

063-651073-651083-651

063-652073-652083-652

00.1SCN

063-261073-261083-261

063-262073-262083-262

063-268073-268083-268

51

052.SCN

082-721092-721003-721

5.3

052.SCN

082-321092-321003-321

082-322092-322003-322 003-328

052. S"5.1 203-721)001-CTT(

573.SCN

082-331092-331003-331

082-332092-332003-332

082-338092-338003-338

573.SCN

082-731092-731003-731

005.SCN

082-341092-341003-341

082-342092-342003-342

082-348092-348003-348

005.SCN

082-741092-741003-741

057.SCN

063-351073-351083-351

063-352073-352083-352

063-358073-358083-358

52 052.SCN

082-921092-921003-921

00.1SCN

063-361073-361083-361

063-362073-362083-362

063-368073-368083-368

Immersion Transducers—ISS and IS Styles

18

Immersion TransducersSingle Element Immersion Transducers are longitudinal wave transducers typically used inmanual, semi-automatic, and automatic scanning systems. Scanning parts with irregular orcomplex geometries is possible because of the conforming “water path” layer between the probeand the inspected material. Superior near-surface resolution can be achieved when compared tocontact transducers. Angle beam inspection is possible by simply angling the probe or searchtube in relation to the part surface. Spherical (point) or cylindrical (line) focusing can also beaccomplished using acoustically matched lenses. Focal length must be specified.

IPS Style ImmersionIPS Immersion Transducers with small diameter cases are designed for immersionapplications where transducer size limitations exist. The Alpha series are designed formaximum bandwidth and resolution capabilities. The Gamma series are for increased sensitivity andpenetration. All IPS Transducers have Microdot connectors.For best results the connector should besealed with a non-water soluble grease.

IR Style Immersion

IR Immersion Transducers are used where.25″ to .5″ diameter probes are desired,but where space constraints exist thatprohibit the use of standard ISS Styletransducers. IR Style transducers have aright angle mounted UHF connector andwill fit into a 1.5 cubic inch area. The IR isavailable in both the Alpha and Gammaseries and can be focused forcritical applications toimprove near-surfaceresolution or sensitivityto small discontinuities.

tnemelEretemaiD

A B

521. 83. 54.1

052. 83. 54.1

.qerF)zHM(

eziS).ni(


eziS).ni(

SEDOCTCUDORP

sucoF*ahplAseireS

ammaGseireS

sucoF*ahplAseireS

ammaGseireS

0.1

052.NCS

024-122014-122004-122

5.3

052.NCS

024-321014-321004-321

024-322014-322004-322

573.NCS

024-132014-132004-132

573.NCS

024-331014-331004-331

024-332014-332004-332

005.NCS

024-142014-142004-142

005.NCS

024-341014-341004-341

024-342014-342004-342

52.2

052.NCS

024-221014-221004-221

024-222014-222004-222

0.5

052.NCS

024-421014-421004-421

024-422014-422004-422

573.NCS

024-231014-231004-231

024-232014-232004-232

573.NCS

024-431014-431004-431

024-432014-432004-432

005.NCS

024-241014-241004-241

024-242014-242004-242

005.NCS

024-441014-441004-441

024-442014-442004-442

tnemelEretemaiD

A B C

,573.,052.005.

57. 49. 57.

Immersion Transducers—IR Style

* Focus: S = Spherical; C = Cylindrical; N = Non-focus. Focal length must be specified.For available focal lengths, see table at the end of the Immersion Transducers section.Note: Waterproof cables are available in Accessories Section.

.qerF)zHM(

eziS).ni(


eziS).ni(

SEDOCTCUDORP

sucoF*ahplAseireS

ammaGseireS

seirosseccA sucoF*ahplAseireS

ammaGseires

seirosseccA

0.1 052.SCN

023-122033-122043-122

elbaC

CNB'6210-C

01 052.SCN

023-621033-621043-621

023-622033-622043-622

elbaC

CNB'6210-C

52.2 052.SCN

023-221033-221043-221

023-222033-222043-222

51

521.SCN

023-711033-711043-711

5.3 052.SCN

023-321033-321043-321

023-322033-322043-322

052.SCN

023-721033-721043-721

0.5 052.SCN

023-421033-421043-421

023-422033-422043-422

22 521.SCN

023-811033-811043-811

52 052.SCN

023-921033-921043-921

Immersion Transducers—IPS Style

* Focus: S = Spherical; C = Cylindrical; N = Non-focus. Focal length must be specified. For available focallengths, see table at the end of the Immersion Transducers section.

.qerF)zHM(

eziS).ni(


eziS).ni(

SEDOCTCUDORP

sucoF*ahplAseireS

ammaGseireS

seirosseccA sucoF*ahplAseireS

ammaGseires

seirosseccA

0.1 052.SCN

023-122033-122043-122

elbaC

CNB'6210-C

01 052.SCN

023-621033-621043-621

023-622033-622043-622

elbaC

CNB'6210-C

52.2 052.SCN

023-221033-221043-221

023-222033-222043-222

51

521.SCN

023-711033-711043-711

5.3 052.SCN

023-321033-321043-321

023-322033-322043-322

052.SCN

023-721033-721043-721

0.5 052.SCN

023-421033-421043-421

023-422033-422043-422

22 521.SCN

023-811033-811043-811

52 052.SCN

023-921033-921043-921

19

Immersion TransducersSingle Element Immersion Transducers are longitudinal wavetransducers typically used in manual, semi-automatic, andautomatic scanning systems. Scanning parts with irregular orcomplex geometries is possible because of the conforming “waterpath” layer between the probe and the inspected material.Superior near-surface resolution can be achieved when comparedto contact transducers. Angle beam inspection is possible bysimply angling the probe or search tube in relation to the partsurface. Spherical or cylindrical focusing can also be accomplishedusing acoustically matched lenses. Focal length must be specified.

Velocity System Immersion TransducersThese transducers are specifically designed for use with throughtransmission Krautkramer Velocity Systems. These transducersare available in either the ISS Style or IR Style housing and areprovided with standard waterproof UHF connectors.

Velocity System ImmersionTransducers ISS/IR Styles

ISS

IR

Immersion Transducer Focal Lengths

N = (Dia.)2 × (Freq.) 4 × Velocity

The following table lists the near field lengthsand minimum and maximum practical focallengths in water expressed in inches. To findthe approximate near field length in steel,divide all N values by 4.

ycneuqerF)zHM(

)sehcnI(retemaiDtnemelE

0.1 57. 05. 573. 52. 521.

0.1N

niMxaM

3.40.20.3

4.25.10.2

1.10.10.1

52.2N

niMxaM

6.90.20.6

4.55.10.4

4.20.10.2

4.18.8.

6.5.5.

5.3N

niMxaM

0.510.20.8

4.85.10.6

7.30.15.2

1.28.5.

9.5.5.

0.5N

niMxaM

0.120.20.8

0.215.10.8

4.50.10.4

0.38.0.2

3.15.8.

3.3.3.

0.01N

niMxaM

0.425.10.8

7.010.10.6

0.68.5.4

7.25.5.1

7.3.3.

0.51N

niMxaM

0.610.10.6

0.98.0.6

0.45.0.2

0.13.5.

0.52N

niMxaM

7.65.0.2

7.13.0.1

.qerF)zHM(

SEDOCTCUDORP

elytSSSI

elytSRI

0.5 103-441 124-441

N = Near field practical focal length.Min = Minimum practical focal length.Max = Maximum practical focal length.

20

Single Element TransducersFor Use With Precision Thickness Gauges

Precision thickness gauging transducers aresingle element, delay line and contacttransducers designed primarily for use withKrautkramer precision thickness gauges.They may also be used with most standard flawdetection instruments. A wide variety is availableto satisfy virtually any inspection requirement onmost metals and nonmetals with relativelysmooth, parallel front and back surfaces.Depending on probe selection and materialconditions, most precision gauges can measurefrom 0.005 to 15.00 inches in steel and plastic.

snoitacificepSrecudsnarTelbitapmoCLD3LCdna3LC

ledoM epyTrecudsnarT tcatnoCretemaiD

lanimoNycneuqerF

egnaRgnirusaeM)detonsselnuleets(

edoCtcudorP

RFD2ahplA dradnatS,yaleDgnisuoH

.ni03.0mm6.7

zHM51 .ni0.1ot010.0mm52ot52.0

066-725-311

,A2ahplARFDiniM

llamS,yaleDgnisuoH

.ni91.0mm8.4

zHM02 .ni002.0ot010.0mm5ot52.0

556-815-311

A112AC ,tcatnoCdradnatS

.ni57.0mm1.91

zHM5 .ni0.51ot080.0mm183ot2

000-445-311

512AC ,tcatnoCdradnatS

.ni05.0mm7.21


110-421-311

F2ahplA ,tcatnoCpitegniF

.ni83.0mm7.9


000-625-311

P-RFDahplA yaleD,scitsalPeniL

.ni03.0mm6.7

zHM22 .ni051.0ot500.0mm8.3ot31.0

ylnoscitsalP

166-811-311

omeLelgnathgirottodorciM(elbac406--505-220aesunoitcennocrecudsnartdnatnemurtsniroF)rotcennocomeLthgiartsottodorciM(529-405-220aro,)rotcennoc

snoitacificepSrecudsnarTelbitapmoC403LCdna003LC

ledoM epyTrecudsnarT retemaiDtcatnoC lanimoNycneuqerF

leets(egnaRgnirusaeM)detonsselnu

edoCtcudorP

RFD2ahplA dradnatS,yaleDgnisuoH

.ni03.0mm6.7

zHM51 .ni0.1ot700.0mm52ot52.0

066-725-311

,A2ahplARFDiniM

llamS,yaleDgnisuoH

.ni91.0mm8.4

zHM02 .ni002.0ot500.0mm5ot31

556-815-311

A112AC ,tcatnoCdradnatS

.ni57.0mm1.91

zHM5 .ni0.51ot060.0mm183ot5.1

000-445-311

F2ahplA ,tcatnoCpitegniF

.ni83.0mm7.9

zHM01 .ni0.01ot060.0mm452ot5.1

000-625-311

521ABK ,scitsalPtcatnoC

.ni81.0mm6.4

zHM02 numinim.ni010.0muminimmm52.0

ylnoscitsalP

600-815-311

403LCneP-KylnO

elytSlicnePrecudsnarT

.ni090.ro560.mm3.2ro7.1

zHM02 noitacilppanotnednepeDlaiceps403LCderiuqerdna

gnittessunem

092-030-983

)CNBottodorciM(elbac210-041-811aesunoitcennocrecudsnarttotnemurtsniroF

CA211

Alpha DFR-P

Alpha 2F

KPen

KBA125

Alpha 2DFR

Mini DFR

CA215

21

Standard probes are readily available to satisfy a wide range of remaining wall thickness applica-tions including: high-temperature, through-coating, erosion/corrosion, thin materials, areas oflimited access, tough-to-penetrate materials (coarse-grained/nonmetals), external pitting, wear-resistance, boiler tubing, small diameter piping and tubing, and general-purpose applications.

DIALOG Intelligent Probes are automatically recognized by the DM4 Family of instruments for quicksetup, best performance, and test documentation. The model FH2E-D-REM contains a built-inmembrane switch with no additional cable lines to send and store readings in the DM4 DL’s on-board data logger at a press of the index finger of the probe hand.

Dual Element D-Meter ProbesCompatible with the D-Meter line of ultrasonic thickness gauges.

A B

CD E

F

G

HI

JK

L

M

N

O

P

Q

lebaL ledoM noitangiseD elbaCeborP retemaiDtcatnoCgnirusaeM

egnaRleetSni

egnaRpmeT edoCtcudorP

.A E2HF pitregniF dettoP "083. "0.2-"030. F°031< 500-255-311

.B **D-E2HF pitregniF dettoP "083. "0.2-"030. F°031< 700-255-311

.C **MER-D-E2HF dneSetomeR dettoP "083. "0.2-"030. F°031< 900-255-311

.D *HF055BK pitregniF dettoP "573. "0.2-"060. F°031< 100-055-311

.E 213AD slairetaMnihT 235ABK "003. "0.1-"520. F°031< 609-650-380

.F 525ABK tnirptooFmm5 dettoP "002. "0.1-"520. F°031< 200-615-311

.G *61B213AD tnirptooFmm3 dettoP "021. "05.-"520. F°031< 439-660-380

.H 065ABK esopruPlareneG 135ABK "526. "0.8-"060. F°054< 012-445-311

.I **D-065ABK esopruPlareneG 135ABK "526. "0.8-"060. F°052< 409-650-380

.J 103AD esopruPlareneG 335ABK "574. "0.8-"050. F°041< 509-650-380

.K 303AD noitarteneP 335ABK "536. .nim"002. F°041< 401-165-311

.L 401-PD noitartenePhgiH 235ABK "52.1 .nim"002. F°031< 600-255-311

.M RW-E2HF tnatsiseRraeW dettoP "055. "0.2-"030. F°031< 212-445-311

.N RW-065ABK tnatsiseRraeW 135ABK "007. "0.8-"060. F°054< 500-255-311

.O **RW-D-E2HF tnatsiseRraeW dettoP "055. "0.2-"030. F°031< 800-255-311

.P 004THA004TH erutarepmeThgiH 535ABK

635ABK "005. "0.01-"040. F°0001< 067-425-311067-422-311

.Q *HTB055BK relioBdeddutSebuT HTB-C "573. "0.2-"060. F°031< 300-055-311

22

Applications and Special Probes LabThe Krautkramer Applications Lab has a long history of providing a broad spectrum of services to ourcustomers. Experienced Application Engineers and Specialists will work closely with the customer to providetechnical assistance and custom designed products to solve challenging ultrasonic testing applications.

Applications Support GroupThis group specializes in the evaluation of customer supplied samples to provide practicalrecommendations and solutions for ultrasonic testing problems. Typical applications include thickness andvelocity measurements, flaw detection and evaluation and material characterization. This group alsoprovides applications support for small, integrated ultrasonic testing systems. The Applications Lab is fullyequipped with a large selection of ultrasonic instrumentation to aid in providing total testing solutions.

Special Probes GroupThe Special Probes Group designs and manufactures custom transducers for specific ultrasonictesting applications. This may include the modification of transducer case design, element size andshape or the connector type and location. The customer may require transducers with customelectrical and acoustic per formance including non-standard frequencies, resolution, sensitivity,bandwidth or focusing. Special test fixtures, custom wedges, delay lines and cables are also designedand built to meet customer specifications.

Examples of Special Probe Types• I.D. and O.D. Bore Probes • Special Focused Probes • Advanced Flaw Sizing Probes• Special Paintbrush Probes • High Temperature Probes • Radiation Resistant Probes• Coarse Grain Inspection Probes • Multiple Transducer Probes • Industrial Linear, Phased,

and Annular Arrays

For further assistance from the Applications Lab, please copy and complete the customer inquiry form onthe next page and fax it to (717)-242-4170—make extra copies for additional inquiries. You can also phonethe Applications Lab at (717)-242-0327 or visit Krautkramer on the Internet at www.krautkramer.com

23

Phased Array TransducersPrinciples of Phased Array Transducers

By sequentially firing the individual elements of an array transducer at slightly different times,the ultrasonic wavefront can be focused or steered in a specific direction.

Additionally, electronically phasing the order and sequential firing speeds of an array allows for“sweeping” or “panning” through a selection of beam angles or across an area of inspectionwithout manually manipulating the transducer.

Linear Phased Array Curved Phased Array

Key Features• Electronic focal length adjustments• Electronic linear scanning• Electronic beam steering / angulation

Key Benefits• Reduced manual manipulation• Reduced scanning surface contact area

necessary (footprint)• Reduced need for multiple inspections with

specifically angled or focused probes• Increased inspection speed and efficiency• Increased coverage of inspection area

General SpecificationsFrequency

1 MHz to 7.5 MHz (10 MHz in some cases)Piezoelectric material

Proprietary BENCHMARK COMPOSITE®

Number of elements16–256 elements (application dependent)

Pitch0.2mm minimum

Bandwidth (-6dB)60% - 80% typical

Crosstalk> 30dB

Element sensitivity variation± 2dB

Cable optionsDetachable connector or potted cable

Phased Array Steering Phased Array Focusing

Annular Phased Array

24

Applications Lab – Customer Inquiry Form*Please complete this form and fax it to the Krautkramer Applications Lab at (717)-242-4170

Name:_______________________________ Title: ____________________ Date: _________________

Company Name: __________________________________________________ Phone: ________________

Address: ________________________________________________________ City: __________________

State: _____________ ZIP: ____________ Fax: ______________________ E-mail: ________________

Brief Description of the Ultrasonic Application:

Material Type: _____________________ Dimensions: _________________ Shape: ________________

Test Method: Contact r Immersion r Scan Method: Manual r Mechanical r In-Line r

Current Ultrasonic Instrument: _____________________________________

Test Objective:___________________________________________________________________________________________

___________________________________________________________________________________________

___________________________________________________________________________________________

___________________________________________________________________________________________

Special Concerns: Restricted Access r Temperature r Radiation r Surface Condition r

Flaw Type(s): __________________________ Size: _________________ Location: ______________

Please include a sketch of the test part

I am interested in Special Transducers for this application:

Type: Single Element r Dual Element r Array r Frequency: ________________ MHz

Element Size: ____________ Damping: Alpha(High) r Gamma (Low) r Connector: ____________

Focus: Flat r Spherical (Spot) r Cylindrical (Line) r Focal Distance: ______________

25

Cables

Krautkramer offers a complete selection of transducer cables andadaptors with the most commonly used connections. Cables aredesigned with reinforced connector-cable junctions for longservice life. Custom transducer cables and adaptors areavailable upon request. Call or write for price and delivery.

noitpircseDhtgneL)teef(

elbaCepyT

SEDOCTCUDORP

DMMotCNBDMotCNBDMotCNBDMotFHU

0.60.60.210.6

871GR471GR471GR471GR

740-C210-C110-C030-C

DMotOMELDMelgnAthgiRotCNB

CNBotCNB

0.60.60.6

471GR471GR85GR

220-C330-C610-C

CNBotCNBCNBotFHU

CNBotOMEL

0.210.60.6

85GR85GR85GR

120-C720-C810-C

)foorpretaw-non(FHUotFHU)foorpretaw-non(FHUotFHU

)foorpretaw-non(FHUotOMEL

0.60.210.6

85GR85GR85GR

020-C520-C530-C

FHUfoorpretaWotCNBFHUfoorpretaWotFHU

DMMotCNBlauD

0.60.60.6

8128nedleB8128nedleB9093-052DM

310-C920-C410-C

DMotCNBlauDDMotFHUlauD

0.60.6

471GR471GR

420-C430-C

CNBotlauDCRytuDyvaeH,CNBotlauDCR

0.60.6

471GR471GR

880-C980-C

lauDCNBotV065ABXderomrA,lauDCNBotA004THdradnatS,lauDCNBotA004TH

0.60.60.6

471GR471GR471GR

760-C101-C201-C

epyT noitpircseD SEDOCTCUDORP

FHU-CNBCNBhtiwtnemurtsnirorecudsnartstpadA

rotcennocFHUhtiwelbacotrotcennoc520-A

CNB-FHUFHUhtiwtnemurtsnirorecudsnartstpadA

rotcennocCNBhtiwelbacotrotcennoc620-A

CNB-OMEL1#OMELhtiwtnemurtsnistpadA

tnemurtsnitaelbacCNBotrotcennoc030-A

AR-FHUTS"¾,FHUTSepytrofrotpadaelgnathgiR

ebuthcraesretemaid230-A

FITS-FHUotrotcennocFHUhtiwrecudsnartstpadA

ebuthcraesepytegnalf"573.1130-A

CNB-MDeborpretem-DnogulpOMELstpadA

srotcennocCNBlaudotelbac540-A

CNB-CNB elbacCNBrehtonaotelbacCNBselpuoC 010-A

Special cables available on request.

Adaptors

Special adaptors available on request.

Search Tubes

The STUHF stainless steelimmersion search tube has anoutside diameter of .735″ and is foruse with all immersion transducerswith UHF (threaded) connectors.

htgneL).ni(

TCUDORPSEDOC

htgneL).ni(

TCUDORPSEDOC

5.1 010-TS 0.21 610-TS

0.2 110-TS 0.81 810-TS

0.3 210-TS 0.42 510-TS

5.4 310-TS 0.63 910-TS

0.6 410-TS

Special lengths available on request.

Accessories

26

Exosen Couplants(General Purpose)Krautkramer Exosen ultrasonic couplant isspecially formulated for ultrasonic couplingin all general applications. Exosin isavailable in five standard viscosities andhas the following properties:

Accessories

ytitnauQ EDOCTCUDORP

ebut).zo5.3(.g001 174-ZX


elttobezeeuqsecnuo2 047-DX

ytitnauQ SEDOCTCUDORP

ebutecnuo2 010-HX

sebutecnuo2nezoD 510-HX

ytitnauQ SEDOCTCUDORP

elttobezeeuqsecnuo8 028-LX

elttobezeeuqsecnuo61 048-LX

reniatnocnollag1 068-LX

reniatnocnollag5 088-LX

XL Couplant(Laboratory and Smooth Surfaces)Krautkramer XL ultrasonic couplant is specificallymade for laboratory testing of transducers and forcontact testing of materials having smoothsurface finish of 62 microinches RMS or better inboth general production and laboratory testing.

SLC Couplant(Curved, Rough, Vertical,and Overhead Surfaces)

Krautkramer SLC couplant is a thick highlyattenuative couplant ideal for making thicknessmeasurements on very rough surfaces that wouldnot be possible with thinner couplants. Its highviscosity also makes it an excellent couplant foruse on vertical and overhead surfaces.

Hitempco Couplant(High Temperature)Krautkramer Hitempco is an excellent hightemperature couplant for inspection on surfacesat temperatures up to 550°F. Its high viscosity(toothpaste consistency) makes it ideal onvertical and overhead surfaces.

Delay Line, Wedge and ProtectiveFace Couplant

This couplant is for use between the face of thetransducer and the delay line, wedge,membrane, or wear cap with which it is used.

ZGM Couplant(High Temperature)ZGM is a highly viscous, high temperaturecouplant manufactured by Krautkramer. It isdesigned for use on surfaces with temperaturesof 400°F (minimum) to 1000°F. Primarily intendedfor wall thickness measurement, ZGM contains asolid filler that melts at high temperature.

Note: MSDS included with each Exosen shipment. Letter ofcertification available upon request. Empty 8 ounce squeezebottle included with each gallon of Exosen.


reniatnocecnuo4 080-X

Note: Letter of certification included with eachHitempo shipment.

Note: All couplant, Exosen or XL, shipped innonreturnable polyethylene containers. Averagegross weight per 55 gallon drum is 410 pounds.Not intended for human consumption.

• Water soluble.• Low sulphur and halogens.• Non-toxic and nonflammable.• Antiseptic—non-irritating—pleasantly scented—safe.• High viscosity grades ideal for vertical and overhead surfaces.• Rust preventative added.• Shelf life of one year when stored between 50°F and 80°F and out of direct sunlight.

Please order by product code from the table.

tnalpuoCedarG

tnelaviuqEytisocsiV

*nollag1foesaC

ruoF*nollag1

nollag5 nollag55

01nesoxE lIO03 022-X 522-X 042-X 062-X

41nesoxE liO04 023-X 523-X 043-X 063-X

02nesoxE liO09 024-X 524-X 044-X 064-X

03nesoxEyvaeHelbaruoP

025-X 525-X 045-X 065-X

04nesoxE dilosimeS — — 046-X 066-X

27

AccessoriesTest BlocksType DC Block (AWS type)For shear wave distance calibration.Contains a 1.0″ radius overlaying a 2.0″radius on 180° half circle.Dimensions:2.0″ radius section is .50″ thick;1.0″ radius section is 1.0″ thick.Product Code: 118-540-290.

Type SC Block (AWS type)For shear wave sensitivity calibration.Contains two .062″ diameter sidedrilledholes. Distance from front surface tocenter of holes is .178″ and .521″.Dimensions: 3.000″ x 1.250″ x .905″.Product Code: 118-540-330

AWS Resolution BlockFor checking resolution capabilities ofangle beam transducers. Contains threesets of three .062″ diameter thru holesfor 45°, 60°, and 70°.Dimensions: 6″ x 3″ x 1″Product Code: 118-540-350

Angle Beam Block (Miniature Size)Substitute for DSC Block for general anglebeam calibration. Contains 1.0″ radiusopposite a 2.0″ radius, and a 5/64″ side-drilled, flat bottom hole .750″ deepDimensions: 1.0″ thick.Product Code: 118-540-260

IOW Beam Profile Block(English or Metric)For beam profile measurement of anglebeam transducers and for measure-ment of transducer angles.Dimensions: 12″ x 3″ x 2″Product Code: 118-540-240

Type DSC Block (AWS type)For shear wave distance and sensitivitycalibration. Contains a 1.0″ radiusopposite a 3.0″ radius. The 3.0″ radiusincludes a radius slot .375″ deep x.032″ wide. Also contains 0″ referencepoint for checking exit point on wedge,and a .125″ diameter side-drilled thru holeand corresponding markings at 45°, 60°, and 70°for measuring actual refracted angle.Dimensions: 1.0″ thickProduct Code: 118-540-300.

Step BlocksFor Thickness and linearity calibration.Available in 4-step version withthickness of .250″, .500″, .750″,and 1.00″;or 5-step version, withthickness of .100″, .200″, .300″,.400″, and .500″.4-Step Product Code: 118-540-320.5-Step Product Code: 118-540-310.

Type DS Block (AWS type)For longitudinal distance and sensitivitycalibration. Contains a 2.0″ high sectionbetween two 4.0″ high sections.Dimensions: 6.0″ x 4.0″ x 2.0″ .Product Code: 118-540-340.

IIW Block Type 1For calibration of shear andlongitudinal transducers, andfor verification of shear wedgeexit point and refracted angle.Also can be used to checkresolution and sensitivity.Dimensions: 12″ x 4″ x 1″ .Product Code: 118-540-270.

IIW Block Type 2Modified version of originalIIW Type 1. Includes a 2.0″radius x .250″ deep cut-outand additional side-drilledholes for resolution studies.Dimensions: 12″ x 4″ x 1″ .Product Code: 118-540-280.

NAVSHIPS Test BlockUsed in accordance withNAVSHIPS Specification 0900-006-3010. Section 6, fordistance amplitude correction,sensitivity levels and flaw depthinformation. Contains six 3/64″diameter side-drilled holes atdistances from ¼″ to 2 ¾″ .Dimensions: 12″ x 3″ x 1 ¼″Product Code: 118-540-370

30FBH Resolution BlockFor determining resolution andsensitivity capabilities and toproduce area/amplitude plots fornormal beam transducers.Contains ten flat bottom holeseach of diameters 3/64″, 5/64″, and8/64″ at test metal distances from.050″ to 1250″Dimensions: 11″ x 1 ½″ .Product Code: 118-540-230.

ASME-625 Reference PlateFor longitudinal, shear, and surface wavesensitivity calibrations.Contains six flat bottom holes:three 4/64″ diameter holes, oneeach at a depth of .050″, .250″,and .50″, and one 4/64″ hole1.500″ deep, one 8/64″ hole1.625″ deep, and one 16/64″hole 1.750″ deep.Dimensions: 12″ x 6″ x ½″ .Product Code: 118-540-360.

28

Accessories

Miniature Resolution BlockFor checking resolution capabilities andcalibrating high resolution test equipment.Contains four 3/16″ wide and 5/8″ long, milledslots to simulate flat plate reflectors at metaltravel distances of .015″ , .020″ , .025″ , and.030″ , and six flat bottom holes, three eachwith diameters of 3/64″ and 1/64″ at metal traveldistances of .020″ , .025″ , and .030″ .Dimensions: 3 5/8″ x 1 x 1/8″ .Product Code: 118-540-250.

Test Blocks, continued

ASTM Area/Amplitude Block Set(8 Blocks) Includes the following blocks:1-0300, 2-0300, 3-0300, 4-0300, 5-0300,6-0300, 7-0300, and 8-0300.Product Code: 118-540-018.

ASTM Distance/Amplitude Block Set(19 Blocks) All 19 blocks have the same sizetest hole. Hole size must be specified whenordering (3/64″ , 5/64″ , or 8/64″ ). The metal traveldistances, for the set are: 0006, 0012, 0025,0037, 0050, 0062, 0075, 0087, 0100, 0125,0175, 0225, 0275, 0325, 0425, 0475, 0525,and 0575.Product Code: 118-540-028.

ASTM Distance/ Area Amplitude Set(10 Blocks) Includes the following blocks:3-0300, 5-0012, 5-0025, 5-0050, 5-0075,5-0150, 5-0300, 5-0600, 8-0300, and 8-0600.Product Code: 118-540-019.

noitpircseD SEDOCTCUDORP

dnaemanremotsucgnicnereferecnailpmocfoetacifitreC.1,skcolbfonoitpircsed,rebmunredroesahcrupremotsuc,sserdda

decnerefertahtseifitreC.srebmunlaireskcolbdna,lairetamelbacilppahtiwecnadroccaniderutcafunamerewskcolb

elbaecarttnempiuqegnirusaemhtiwdekcehcdnasnoitacificeps.sdradnatSfouaeruBlanoitaNehtot

619-CB

)1(nidetsilsaecnailpmocfoetacifitrec,ylnoskcolBMTSAroF.2.decnereferskcolbllaroftolpedutilpmA/ecnatsiDsulpevoba

719-CB

lairetamgnitsilsisylanadnaecnailpmocfoetacifitreC.3dna,ezisniarg,ssendrah,rebmuntaeh,edarg,noitacificeps

.evoba)1(nidetsilnoitacifitrecllasedulcnI.sisylanalacimehcredrOlaicepS

Single ASTM BlocksFor measuring the sensitivity and/or resolution ofnormal beam transducers. Machined to E-127-64dimension requirements. Available with flat bottomholes from 1/64″ to 8/64″ diameter, with test metaldistances from .062″ to 6.00″ . Prices for otherlengths and diameters furnished on request. Blockidentification is as follows: first digit indicates holediameter in 64ths, next four digits indicate testmetal distance in hundredths of an inch. Therefore,a 3-0050 block would have a 3/64″ diameter FBH at.500″ TMD. Special Order.

Notes: (Apply to all test blocks) 1. Product codes listed are for steel test blocks only. Please order all steel blocks by product code listed for each type.

All other block materials should be ordered on an individual basis by description. 2. Please see price list for ordering and delivery information. 3. Krautkramer’s test blocks are machined to engineering specifications and to precision tolerances from ultrasonically

inspected and approved material. 4. All blocks and sets listed include quality hardware cases except single ASTM blocks. 5. Steel blocks are nickel plated unless otherwise requested. 6. Special test blocks quoted on request based on specifications, type of material, and whether material is supplied

by Krautkramer or customer. 7. For details on test block certification, see table above.

ASME Calibration BlocksProvided with one flat bottom hole withdiameter and depth per specifications.Special Order.

29

Transducer Certification

noitpircseDTCUDORP

SEDOC

murtcepSycneuqerFdnamrofevaWemiTlaeRteehSnoitaciffitreC

119-CT

Y:shtpedeerhtta,saeraYdnaX,eliforPmaeB 0,Y½ 0 Y½1, 0

319-CT

leets0434rofyficeps,evruCedutilpmAecnatsiDmunimularo

419-CT

Transducer Certification

Beam ProfileThe beam profile plot is made by moving thetransducer across a small rod reflector in animmersion tank. Ball or wire reflectors are alsocommonly used. The beam profile gives therelative intensity and width of the sound beam ata given distance from the transducer face.

Distance Amplitude Curve

The distance amplitude curve shows the effectof the near field (Fresnel Zone) as well as theexponential decay of the far field.

Real Time Waveform and Frequency SpectrumThe real time waveform and frequency spectrumcertifies the natural, unbiased, unfiltered waveformand the degree of damping and shows the frequencycomponents of the gated signal. A highly damped unitsuch as an Alpha Series transducer gives optimumresolution while displaying a broad frequencyspectrum. This is necessary for thickness gauging ofthin materials or when inspecting for near-surfaceflaws. A transducer that is not as highly damped willhave greater penetrating power but less resolutionand a narrower frequency spectrum.

30

Bd oitaR Bd oitaR Bd oitaR Bd oitaR

0 1:00.1 5 1:87.1 11 1:55.3 71 1:807

5. 1:60.1 6 1:00.2 21 1:89.3 81 1:49.7

1 1:21.1 7 1:42.2 31 1:74.4 91 1:19.8

2 1:62.1 8 1:15.2 41 1:10.5 02 1:00.01

3 1:14.1 9 1:28.2 51 1:26.5 04 1:00.001

4 1:85.1 01 1:61.3 61 1:13.6 06 1:00.0001

Tables and Formulas

Near Field Length (N)in Water (Inches)

ycneuqerF)zHM(

)sehcni(retemaiDtnemelE

00.1 57. 05. 52.

0.1 3.4 4.2 70.1 72.

52.2 6.9 4.5 4.2 06.

0.5 4.12 0.21 4.5 3.1

0.01 34 42 7.01 7.2

.4ybseulavevobaehtedivid,leetsnihtgnel.xorppaehtdnifoT

Velocity and Acoustic Impedance of Common Materials

Useful Formulas

dB vs. AmplitudeRatio Chart

yeKlobmyS

λ htgnelevaW=

retemaiDeborP=D

ycneuqerFeborP=F

yticoleVcitsuocA=C

ytisneD=d

α elgnAtnedicnI=

β elgnAdetcarfeR=

ssenkcihTtraP=T

htaPdnuoS=.P.S

dleiFraeN=N

γ elgna-½ecnegreviD=

=htgneLdleiFraeN D2 DroC4/F 2 4/ λ

daerpSmaeB NIS γ FD/C= × D/l22.1ro22.1

waLs'llenS NIS α C=bNIS/ 1 C/ 2

=ecnatsiDpikS T2 × NAT β=htaP-V T2 × SOC β

ecnatsiDecafruS=)detcejorP(

.P.S × NIS β

1(htpeD ts =)geL .P.S × SOC β2(htpeD dn =)geL .P.S(–T2 × SOC β)

3(htpeD dr =)geL .P.S( × SOC β T2–)

=htgnelevaW F/C=l

=ycneuqerF l/C=F

=ecnadepmIcitsuocA C=Z × d

dnuoSdetcelfeRfo%=erusserP

Z(=pR 2 Z– 1 Z(/) 2 Z+ 1)

fotneiciffeoC=noissimsnarT

Z2=pT 2 Z(/ 2 Z+ 1)

=htdiWmaeBlatoTNAT2()N–htpeD(=WBT γ +)

T × retemaiDtnemelE

:emiTtisnarT C/T2=TT

=ycneuqerFretneC Fc F(= 1 F+ 2 2/)

=htdiwdnaB% F(=WB% 2 F– 1 F/) c × %001

=rotcaFQ Fc F(/ 2 F– 1)

afoecnerefmucriC=elcriC ×π retemaiD

=ecnatsiD deepS × emit

=MPR ecnerefmucriC/deepS

gninacSmumixaM)y,x(deepS

)WBE+htgneLwalF.niM( × RRP

gninnacSmumixaM)ralop(deepS

MPR × retemaiD × )nimreptf(lavretnIkcolC

=ecnereffiDBd A(goL02 1 A/ 2)

=oitaRBd 02/BdgolvnI

=tnelaviuqEretaW)leets(

)retaw(F=EW × ))leets(C(/))retaw(C()htgneLlacoF=F(

XAM β = NIS 1– )DO/DI(

=htgneLlacoF n/)1–n(F=R

tesffOrednilyCeuqinhceT

suidaRedistuO=)X(tesffO × NIS α

lairetaM

lanidutignoLyticoleV

raehSyticoleV

citsuocAecnadepmI

riA 310. 33. — — 4000.

munimulA 52. 3.6 21. 1.3 0.71

edixOanimulA 93. 9.9 32. 8.5 0.23

muillyreB 15. 9.21 53. 9.8 0.32

edibraCnoroB 34. 0.11 — — 4.62

ssarB 71. 3.4 80. 0.2 7.63

muimdaC 11. 8.2 950. 5.1 0.42

reppoC 81. 7.4 980. 3.2 6.14

)nworc(ssalG 12. 3.5 21. 0.3 9.81

nirecylG 570. 9.1 — — 24.2

dloG 31. 2.3 740. 2.1 6.26

ecI 61. 0.4 80. 0.2 5.3

lenocnI 22. 7.5 21. 0.3 2.74

norI 32. 9.5 31. 2.3 4.54

)tsac(norI 81. 6.4 01. 6.2 2.33

daeL 580. 2.2 30. 7. 6.42

muisengaM 32. 8.5 21. 0.3 0.01

yrucreM 750. 4.1 — — 6.91

munedbyloM 52. 3.6 31. 4.3 2.46

lenoM 12. 4.5 11. 7.2 6.74

enerpoeN 360. 6.1 — — 1.2

610sec.in.

×cm.sec.

105×gm

cm sec. 102

5×610sec.in.

×510sec.cm.

×lairetaM

lanidutignoLyticoleV

raehSyticoleV

citsuocAecnadepmI

lekciN 22. 6.5 21. 0.3 5.94

6-6,nolyN 01. 6.2 340. 1.1 9.2

)03EAS(liO 760. 7.1 — — 5.1

munitalP 31. 3.3 760. 7.1 8.96

ssalgixelP 11. 7.2 340. 1.1 1.3

enelyhteyloP 70. 9.1 20. 5. 7.1

enerytsyloP 390. 4.2 40. 1.1 5.2

enahteruyloP 070. 9.1 — — 9.1

ztrauQ 32. 8.5 780. 2.2 2.51

lytuB,rebbuR 70. 8.1 — — 0.2

revliS 41. 6.3 60. 6.1 0.83

dlim,leetS 32. 9.5 31. 2.3 0.64

sselniats,leetS 32. 8.5 21. 1.3 4.54

nolfeT 60. 4.1 — — 0.3

niT 31. 3.3 70. 7.1 2.42

muinatiT 42. 1.6 21. 1.3 3.72

netsgnuT 02. 2.5 11. 9.2 0.101

muinarU 31. 4.3 80. 0.2 0.36

retaW 4850. 84.1 — — 84.1

cniZ 71. 2.4 90. 4.2 6.92

610sec.in.

×cm.sec.

105×gm

cm sec. 102

5×610sec.in.

×cm.sec.

105×

31

Basic Contact Kit—Product Code 118-450-020Contains a wide assortment for weld inspection, lamination detection, corrosion/erosion and thin guage materials.

Transducer KitsTransducer Kits combine the most popular transducers and accessories necessary for general ultra-sonic testing applications. Discount priced and organized in a hard shell carrying case, the kit contentsare easily accessible, convenient for storage, and economical.

Basic AWS Weld Inspection KitPart No. 118-450-500Contains transducers and accessories requiredfor testing weldments to specification AWS D1.1.

.ytQ SEDOCTCUDORP noitpircseD

1 306-292-311,elytSSWA"36x"36.,zHM52.2eborPmaeBelgnAtnemelEelgniS

1 106-292-311,elytSSWA57x"36.,zHM52.2eborPmaeBelgnAtnemelEelgniS

1 406-292-311,elytSSWA"57.x"57.,zHM52.2eborPmaeBelgnAtnemelEelgniS

1 340-262-311,PHR-RC.aid"1,zHM52.2

eborPtcatnoCevaW-L

1 401-W **egdeWeticuL°54



1 610-C elbaClaixaoCCNB-CNB

1 691-B dradnatSecnerefeRCSD

1 028-LX tnalpuoC.zo8

1 020-008-811 esaCgniyrraCllehsdraH


1 000-445-311,elytSA112AC.aid"5.,zHM5

eborPtcatnoCtnemelEelgniS

1 340-262-311,elytSRC.aid"1,zHM52.2eborPtcatnoCtnemelEelgniS

1 066-725-311,elytSRFD2ahplA"52.,zHM51

eborPeniLyaleD

1 007-422-311,elytSPDA.aid"52.,zHM5

eborPtnemelElauD

1 195-442-311,elytSCQ-WSM.aid"5.zHM5

kramhcneB eborPmaeBelgnA





2 210-C elbaClaixaoCDM-CNB

1 891-045-811dradnatSecnerefeRpetS5

"5.–"1.



Multi-Purpose Contact KitPart No. 118-450-510Contains the most commonly used transducersfor a variety of angle beam, lamination,corroson, general flaw, and thickness testing.

Basic Angle Beam KitPart No. 118-450-030Contains an assortment for weld and otherangle beam inspections.


1 246-492-311,elytSPFBA"81.x"81.,zHM5

eborPmaeBelgnAtnemelEelgniS

1 585-612-311,elytSSWSMS"521.,zHM01


1 006-492-311,elytSSWS"1x"5.,zHM5


1 195-422-311kramhcneB,elytSCQWSM"52.,zHM5


1 691-045-811 dradnatSecnerefeRCSD

1 740-C elbaClaixaoCDMM-CNB



.ae1 221,021-W **egdeWeticuL°07dna°54


.ae1 302,202,102-W **egdeWeticuL°07dna,°06,°54




1 067-422-311,elytSA004TH.aid"52.,zHM5

)xamF°0001(tnemelElauD

1 072-242-311,elytSSCCWP.aid"5.,zHM52.2

eniLyaleDtnemelEelgniS

1 006-292-311,elytSSWS"1x"5.,zHM52.2

maeBelgnAtnemelEelgniS

.ae1 680,070-WegdeWerutarepmeThgiH°06dna°54

).xamF°004(

1 050-KP2roftiKeniLyaleDerutarepmeThgiH

).xamF°004(072-24


1 760-C elbaCCNB-DMlauD

1 201-C elbaCeborPA004/004TH-CNB

2 010-HXtnalpuoCOCPMETIHebuT.zo2

)F°055ottneibma(

1 174-ZXtnalpuoCMGZebuT.zo5.3

)F°0001–004(

1 891-045-811 "5.–"1.dradnatSecnerefeRpetS5


High Temperature KitPart No. 118-450-530Contains dual element delay line, and anglebeam transducersfor flaw detection atelevated temperatures to 1000°F.

Basic Immersion KitPart No. 118-450-040Contains an assortment of spherically focusedtransducers which exhibit good resolution andsensitivity and are ideal for determining whichtype of transducers are best suited for thetesting situation.


1 203-721-311htiweborPelytSSSI"52.,zHM51

sucoFlacirehpS"5.1

1 082-631-311"3htiweborPelytSSSI"83.,zHM01

sucoFlacirehpS

1 063-452-311"6htiweborPelytSSI"57.,zHM5

sucoFlacirehpS

1 082-442-311"2htiweborPelytSSSI"5.,zHM5

sucoFlacirehpS

1 700-065-811 retpadAlaixaoCdetalosIFHU-ARFHU


1 520-A retpadAFHU-CNB


Corrosion Survey KitPart NO. 118-450-520Contains the most popular dual elementflaw detection transducers for corrosiondetection in materials from ambient to 1000°F.


1 007-422-311,elytSPDA.aid"52.,zHM5

eborPtnemelElauD

1 012-445-311,elytS065ABK.aid"573.,zHM5).xamF°054(eborPtnemelElauD

1 067-422-311 elytSA004TH-ABK.aid"52.,zHM5

1 157-292-311,elytSF-UD"5.x"5.,zHM52.2

eborPtnemelElauD

1 142-442-311,elytSRCMP.aid"5.,zHM5

eborPenarbmeMtnemelEelgniS

1 760-C elbaClaixaoC065BAK-CNB



1 201-C elbaCeborPA004/004TH-CNB

2 010-HXtnalpuoCOCPMETIHebuT.zo2

)F°055ottneibma(

1 174-ZXtnalpuoCMGZebuT.zo5.3

)F°001–004(


1 047-DXenarbmeMdnaeniLyaleD/egdeW

tnalpuoC


** Refracted angle in carbon steel @ 70°F.

.ytQ EDOCTCUDORP S noitpircseD

1 306-292-311,elytSSWA"36x"36.,zHM52.2eborPmaeBelgnAtnemelEelgniS

1 195-242-311CMB,elytSCQ-WSM"5.,zHM52.2


1 340-262-311,elytSRC"1,zHM52.2


1 000-445-311,elytSA112AC5.,zHM5


1 142-252-311,elytSRCMP"57.,zHM52.2

eborPenarbmeMtnemelEelgniS

.ytQ EDOCTCUDORP S noitpircseD

1 066-725-311elytSRFD2AHPLA"52.,zHM51eborPeniLyaleDtnemelEelgniS

1 157-292-311,elytSF-UD"5.x"5.,zhM52.2

eborPtcatnoCtnemelElauD

1 186-422-311,elytSCR"52.,zHM5

eborPtcatnoCtnemelElauD



1 420-C elbaClaixaoClauDDM-CNB

1 880-C elbaClaixaoClauDCR-CNB


1 050-D ).scp01(066-725-311rofseniLyaleD

1 120-MP142-352-311rofenarbmeMevitcetorP

).scp21(


.ae1 312,212,112-W **egdeWeticuL°07dna,°06,°54

1 047-DX tnalpuoCeniLyaleD/egdeW



Benchmark Composite ProbesPunch through toughest materials...superior pene-tration, very high signal to noise ratio

Phased Array ProbesDramatically reduce inspection time and cost...scan, focus and change the beam electronically.Change test setup in seconds. One array replacesmany conventional probes.

Application Specific ProbesOptimize test results with custom design probes/accessories. We welcome new applications and custom design requirements. Experienced staff specializes in practical, cost effective solutions.

Now Available on CD!

Krautkramer's New Probe Selection Guide and

Information Library

The CD includes a searchable UT probe data base and selection guide, latest ultrasonic probe catalog, extensive applications and technical reference libraries, litera-ture on new products and full range of products. Request your CD online at AgfaNDT.com and visit our interactive probe database and selection guide while you're there.

Over 4000 standard and special transducersare available for virtually every ultrasonic testing application!

Ultrasonic Systems

Visit AgfaNDT.com for more information on Krautkramer’s Ultrasonic Transducers and tolearn more about Agfa NDT’s complete line of ultrasonic, X-ray, digital and film systemsAgfaNDT.com

Agfa NDT Inc.50 Industrial Park RoadLewistown, PA 17044USATel : (717)242-0327Fax : 717/242-2606E-mail: [email protected]

Agfa NDT GmbHRobert-Bosch-Str 3D–50354 Huerth (Efferen)GermanyTel : +49-2233-6010Fax : +49-2233-601402E-mail: [email protected]

Agfa NDT Ltd.892 Charter AvenueCanleyCoventry, West Midlands CV4 8AFUnited KingdomTel : +44 0845 601 5771Fax : +44 0845 130 5775E-mail: [email protected]

Agfa NDT SA68, Chemin des OrmeauxF–69760, LimonestFranceTel : +33-472-179220Fax : +33-478-475698E-mail: [email protected]

ProbeCat/11023kPrinted In USA

Ultrasonic Transducers - 1718.com.cn · transducers, and eddy current instruments and probes. ......

Documents

Transcript of Ultrasonic Transducers - 1718.com.cn · transducers, and eddy current instruments and probes. ......