ULTRASONIC THICKNESS GAUGEbearingtoolscentre.com/wp-content/uploads/2017/04/...110 Ultrasonic...

Quotation 110 Ultrasonic Thickness Gauge / D-meter Make Dipel Time Time Model B 2 TT100 Extra Probe for TT 100 Range mm 1. 5 to 99 0. 75 - 300 - Least Count 0. 1~ 1.5 to 60 / 0. 2~ 60 to 99 mm 0. 1 mm - With Probe - 1 Probe - Rs. 14500 19500 3500 Catalog Page No.- 4 Page No.- 5 Page No.- 5

Make Microprocessor Mitech M & W M & W Model TM-8810 160 UTG-2841 UTG – 3941 Range mm 1.5 ~ 200 0.75 - 300 1.0 – 300 1.0 – 200 Least Count 0.1 0. 01 mm 0.01mm / 0.001 inch 0.01mm / 0.001 inch Rs. 9900 22550 18000 15000 Catalog Page No.- 7 Page No.- 10 Page No.- 12 Page No.- 13 Make Insize Insize Insize Insize Model ISU – 200C ISU – 250C ISU-100D ISU-200D -P Range mm - - - - Least Count 0.1mm 0.01mm 0.01mm 0.01mm Rs. ---------- 111732 40785 44350 Catalog Page No.- 14 Page No.- 14 Page No.- 16 110 - 1 Ultrasonic Thickness Gauge Transducers – Insize Make Code Meas. Range Appl. Temp. Apps. Catalog Rs. ISU – P05 1.2 - 230mm <60’C General use Page No.- 14 ----- ISU – P02 3 - 300mm <60’C For casting steel Page No.- 14 ----- ISU – P07 0.8 - 80mm <60’C For thin material Page No.- 14 ----- ISU – HT5 3 - 200mm <300’C For high temp. Page No.- 14 ----- ISU – T08 0.8 – 300mm <60’C General use Page No.- 15 ----- ISU – T06 0.7 – 50mm <60’C For casting steel Page No.- 15 ----- ISU – T12 3 - 350mm <60’C For thin material Page No.- 15 ----- ISU – T13 3 – 100mm <350’C For high temp. Page No.- 15 -----

PDF created with pdfFactory Pro trial version www.pdffactory.com

http://www.pdffactory.com

110 – 2 Ultrasonic Thickness Gauge - Metrix+ @ With 10% Discount Model Rs Catalog

1 1 ~ 200 mm Resolution 0.1 mm UTM 5 11200 Page No .- 17 2 1.2 ~ 220mm Resolution 0.1mm UTG 5 8500 Page No .- 18 3 0.9 ~ 350 mm Resolution 0.01 mm UTM 9 14300 Page No .- 18 4 0.9 to 400 mm Resolution 0.01 / 0.01 mm Seltable UTG 27 17000 Page No .- 18 5 3 – 30 mm Through Coating With Probe Selection optional UTM 18CT 39000 Page No .- 20 6 3 – 30 mm Through Coating Probe P 5EE UTM 18CT 4500 Page No .- 20 7 0.65 – 200 mm Thickness Probe NO 7 UTM 18CT 5000 Page No .- 20 8 1.0 – 600 mm Thickness Probe NO 5 UTM 18CT 4500 Page No .- 20 9 Spare Probe Standard 8 mm For UTM 5 & UTM 9 3700 Page No .- 17,18 10 Spare Probe 6 mm For UTM 5 & UTM 9 4400 Page No .- 17, 18 11 High Temperature Ceramic Probe 10000 Page No .- 17, 18 12 PC Interface RS 232C + Softwere + USB Adaptor For UTM 5 & UTM 9 4200 Page No .- 17, 18 13 PC Interface RS 232c + Softwere For UTM 18CT 5800 Page No .- 17, 18

*** Warranty – 6 Months , Certificate - No, Discount – No.

• TT 100 will measure fom 1.5 to 200 mm perfectly.

• No warranty on probe.



Terms & Conditions – • Goods offered - Subject to Prior Sale • Price Validity: "15 Days from Date of Quotation" • C.S.T 2% extra against form C. Otherwise 5% without form C For Out of Gujarat Sales only. • VAT 15% extra for Sales within Gujarat. Prices Ex-Godown Ahmedabad. • Payment against Proforma Invoice, Packing, Forwarding & Freight extra. • Bank Detail – Kotak Mahindra Bank Ltd. • Branch – Shivranjini • Bank IFSC Code - KKBK 0000 810 • Bank Account No. 08102 00000 2689 • Note - While making payment online do mention your Company's name. • TIN NO 24070901229 , CST No. 24570901229 • We are looking forward to your valued orders.



TIME MAKE

ULTRASONIC THICKNESS GAUGE >>TT100/110/120/130/140

TT100 TT110 TT120 TT130 TT140 Features:

• Portable size and easy operation • Suitable for any metallic and non-metallic materials ultrasonic can go through • Self-compensating of nonlinearity function is supplied for correction of pickup nonlineasity • 10 measuring values can be recorded for TT100,TT110,TT130;100 measuring values can be recorded for

TT140 • optional 2.5MHz, 5MHz and 7MHz transducers are available • Clear 4-Digit LCD display with backlight • 5 pre-set sound velocities for repeating applications • mm / inch selectable • TT100,TT130 and TT140 are suitable for thickness testing of various materials with sound speed range

1000-9999m/s • TT110 and TT120 are easy-operation models with only two keys suitable for thickness testing of steel • TT120: high-temperature model • TT140:with backlight display and the memory reach up to 99

Technical Specification

TT100 TT110 TT120 TT130 TT140 Measuring range 0.75 – 300.00mm (steel)

Measuring range for steel pipes Min.3.0mm t ickness ×Φ20 diameter

Diameter of transducer Φ10 (standard) Φ6 (optional) Φ12(option l)

Display resolution 0.1mm 0.01mm 0.1mm Calibration 4.0mm steel base p ate integrated Tolerance ±(1%H+0.1) mm (H means the thickness of tes e piece)

M asuring units mm/inch Sound velocity range 1000-9999m/s 5900 m/ 1000-9999m/s 1000-9999m/s

Display 4-Digital LCD 4-Digital LCD with backlight

Surface temperature -10℃ to +60℃ -10℃ to +300℃ -10℃ to +60℃ -10℃ to +60℃ Battery in i ator Low b ttery voltage indicator

Power supply 2 Pcs. AA batteries 1.5V O eration time 250 hours

Dimensions 126mm×68mm×23mm 118mm×67mm×28mm Weight Approx.250 including batt ries 330g



Standard delivery

• Main unit • 5MHz transducer • 5MHz angle transducer (for TT100/110/130) • ZW5P high temperature transducer for TT120 • Integrated steel calibration plate 4.0mm • Batteries AA 1.5V • Couplant • TIME Certificate • Warranty card • Instruction manual



MICROPROCESSOR MAKE

Model TM – 8810 – MANUAL



MITECH MAKE

Feature: Capable of performing measurements on a wide range of material, including metals, plastic, ceramics, composites, epoxies, glass and other ultrasonic wave well-conductive materials. Transducer models are available for special application, including for coarse grain material and high temperature applications. Two-Point Calibration function. Two work modes: Single point mode and Scan mode. Coupling status indicator showing the coupling status. Optional software to process the memory data on the PC. Optional thermal mini-printer to print the measured data via RS232 port. Specification:

Display：4.5 digits LCD with EL backlight. Measuring Range：0.75～300mm (in Steel). Sound Velocity Range： 1000~9999 m/s. MT160： 0.1/0.01mm Accuracy： ±（0.5%Thickness+0.04）mm, depends on materials and conditions Units: Metric/Imperial unit selectable. Four measurements readings per second for single point measurement, and ten per second for Scan Mode. Memory for up to 20 files (up to 99 values for each file) of stored values. Power Source：Two “AA” size, 1.5 Volt alkaline batteries. 100 hours typical operating time (EL backlight off). Communication：RS232 serial port. Outline dimensions：150×74×32 mm. Weight：245g



Configuration: No Item Quantity Note

Standard Configuration

1 Main body 1 2 Transducer 1 Model: N05/90° 3 Couplant Bottle 1 4 Instrument Case 1 5 Alkaline battery 2 AA size 6 Operating Manual 1 7 Warranty Card 1 8

Optional Configuration

9 Transducer: N02 See Table3-1 10 Transducer: N07

11 Transducer: HT5 12 Mini thermal printer 1 13 Print cable 1 14 DataPro for Thickness Gauge 1 For use on the PC 15 Communication Cable 1

Appendix A: Transducer selection

Model

Freq MHZ

Diam mm

Measuring Range Lower limit Description

N02 2.5 14 3.0mm～300.0mm（In Steel） 40mm (in Gray Cast Iron HT200)

20 for thick, highly attenuating, or highly scattering materials

N05 5 10 1.2mm～230.0mm（In Steel） Φ20mm×3.0mm Normal

Measurement

N05/90° 5 10 1.2mm～230.0mm（In Steel） Φ20mm×3.0mm Normal

Measurement

N07 7 6 0.75mm～80.0mm （In Steel） Φ15mm×2.0mm

For thin pipe wall or small curvature pipe wall measurement

HT5 5 12 3～200mm （In Steel） 30 For high temperature (lower than 300℃) measurement.

Appendix B: Sound Velocity in different materials

Material Sound Velocity In/us m/s

Aluminum 0.250 6340-6400 Steel, common 0.233 5920 Steel, stainless 0.226 5740 Brass 0.173 4399 Copper 0.186 4720 Iron 0.233 5930 Cast Iron 0.173-0.229 4400－5820 Lead 0.094 2400 Nylon 0.105 2680 Silver 0.142 3607



Gold 0.128 3251 Zinc 0.164 4170 Titanium 0.236 5990 Tin 0.117 2960 Epoxy resin 0.100 2540 Ice 0.157 3988 Nickel 0.222 5639 Plexiglass 0.106 2692 Polystyrene 0.092 2337 Porcelain 0.230 5842 PVC 0.094 2388 Quartz glass 0.222 5639 Rubber, vulcanized 0.091 2311 Teflon 0.056 1422 Water 0.058 1473

M&W MAKE



Insize Make



ULTRASONIC THICKNESS GAUGEbearingtoolscentre.com/wp-content/uploads/2017/04/...110 Ultrasonic...

Documents

Transcript of ULTRASONIC THICKNESS GAUGEbearingtoolscentre.com/wp-content/uploads/2017/04/...110 Ultrasonic...