Ultrafiltration systems
1
Ultrafiltration System with Ceramic Cartridge Sepro tech Whea ton, III. Seprotech’s ultrafiltration unit uses all stainless plumb- ing components in addition to three 0.05 pm ceramic cartridges at the center of the system. Plant tests indicate an average production rate of 900 gallons of permeate per 24 hours. The system is being used to purify aqueous cleaner, scrubber water, and synthetic machine coolant solutions for indefinite reuse. Close to 100% of the cleaner and coolant are recovered, while all of the oil and suspended solids are rejected and concentrated to %2 of their original volume. Circle 111 on the reader service card Ultrafiltration Systems TTX Environmental Sturgeon Bay, Wise. TTX Environmental offers custom-designed ultrafiltra- tion units for aqueous cleaner recycling, minimizing of oily waste byproducts, electrocoating paint recovery, and permeate generation. Engineers analyze system output, then employ the membrane configurations best suited to removal and concentration of impurities, recycling baths, and rinses to greatly extend their lives, reduce downtime, improve product quality, and minimize costs through wa- ter reuse of 95% or more. Circle 112 on the reader service card Batch Membrane System Wheelabrator Water Technologies Inc., Memtek Div. Billerica, Mass. The company’s new Batch Membrane System can be equipped with up to eight, 4-tube modules and is capable of processing up to 6,000 gpd of wastewater from metal-finishing and printed circuit board wastewaters. Designed for processing batches of difficult-to-treat concentrated wastewaters, the system is equipped with a stainless steel recirculation pump, cone-bottom HDPE batch treatment tank, control panel, pH and ORP instrumentation, chemical metering pumps, and an air-operated sludge transfer/membrane cleaning pump. Circle 113 on the reader service card 72 METAL FINISHING ?? FEBRUARY 1996
Transcript of Ultrafiltration systems
Ultrafiltration System with Ceramic Cartridge Sepro tech Whea ton, III.
Seprotech’s ultrafiltration unit uses all stainless plumb- ing components in addition to three 0.05 pm ceramic cartridges at the center of the system. Plant tests indicate an average production rate of 900 gallons of permeate per 24 hours. The system is being used to purify aqueous cleaner, scrubber water, and synthetic machine coolant solutions for indefinite reuse. Close to 100% of the cleaner and coolant are recovered, while all of the oil and suspended solids are rejected and concentrated to %2 of their original volume.
Circle 111 on the reader service card
Ultrafiltration Systems TTX Environmental Sturgeon Bay, Wise.
TTX Environmental offers custom-designed ultrafiltra- tion units for aqueous cleaner recycling, minimizing of oily waste byproducts, electrocoating paint recovery, and permeate generation. Engineers analyze system output, then employ the membrane configurations best suited to removal and concentration of impurities, recycling baths, and rinses to greatly extend their lives, reduce downtime, improve product quality, and minimize costs through wa- ter reuse of 95% or more.
Circle 112 on the reader service card
Batch Membrane System Wheelabrator Water Technologies Inc., Memtek Div. Billerica, Mass.
The company’s new Batch Membrane System can be equipped with up to eight, 4-tube modules and is capable of processing up to 6,000 gpd of wastewater from metal-finishing and printed circuit board wastewaters. Designed for processing batches of difficult-to-treat concentrated wastewaters, the system is equipped with a stainless steel recirculation pump, cone-bottom HDPE batch treatment tank, control panel, pH and ORP instrumentation, chemical metering pumps, and an air-operated sludge transfer/membrane cleaning pump.
Circle 113 on the reader service card
72 METAL FINISHING ?? FEBRUARY 1996
