ULTRA PORTABLE MIG • TIG • MMA (Stick)

1
SP-1 PULSE MIG Welder The SP-1 has 1 wire spool that can be used for Aluminum, Silicon Bronze or Steel. 1-MIG Spool • 1 Weld Torch • 1 MMA/ Stick Electrode Torch • Pre-set Synergic Curves • Customizable Weld Settings • Anti-Sticking • Adjustable hot start and arc force Input Voltage: Single Phase 208 - 240VAC 30A 50/60 hz Amp/Volts Min - Max: MMA - 5A/20.2V- 200A/28V, TIG - 5A/10V- 200A/18V, MIG - 20A/15V- 200A/24V Protection: IP 22 Cooling: Fan Cooled Insulation: H System Weight: 53lb (24kg) System Dimensions: 27” x 11.5” x 15.5” ULTRA PORTABLE MIG • TIG • MMA (Stick) The SP-1 Pulse Mig is a 220VAC/30A Single Phase MIG Welder. It uses pulse technology for welding on Aluminum and Stainless Steel. It also comes with a stick (MMA) electrode torch. Easy to Use: • Auto Switching Software • Built-in Synergic Programs • No Bulky Spool Gun or Push Pull Systems TIG (Optional) MMA (Stick) Aluminum Silicon Bronze Steel Optional Cart Available 0.8mm Aluminum Hood Technical Specifications 5932 Sea Otter Place Carlsbad, CA 92010 USA Toll Free: 1 877 PRO SPOT Phone: +1 760 407 1414 Fax: +1 760 407 1421 Email: [email protected] Web: www.prospot.com

Transcript of ULTRA PORTABLE MIG • TIG • MMA (Stick)

Page 1: ULTRA PORTABLE MIG • TIG • MMA (Stick)

SP-1PULSE MIG

Welder

The SP-1 has 1 wire spool that can be usedfor Aluminum, Silicon Bronze or Steel.

1-MIG Spool • 1 Weld Torch • 1 MMA/Stick Electrode Torch • Pre-set SynergicCurves • Customizable Weld Settings •Anti-Sticking • Adjustable hotstart and arc force

Input Voltage: Single Phase208 - 240VAC 30A 50/60 hz

Amp/Volts Min - Max: MMA - 5A/20.2V-200A/28V, TIG - 5A/10V-200A/18V,MIG - 20A/15V-200A/24V

Protection: IP 22Cooling: Fan Cooled

Insulation: H

System Weight: 53lb (24kg)

System Dimensions: 27” x 11.5” x 15.5”

ULTRA PORTABLEMIG • TIG •

MMA (Stick)

The SP-1 Pulse Mig is a220VAC/30A Single PhaseMIG Welder. It uses pulsetechnology for welding onAluminum and StainlessSteel. It also comes witha stick (MMA) electrode torch.

Easy to Use:• Auto Switching Software• Built-in Synergic Programs• No Bulky Spool Gun or Push Pull Systems

TIG (Optional)

MMA (Stick)

Aluminum Silicon BronzeSteel

Optional Cart Available

0.8mm Aluminum Hood

Technical Specifications

5932 Sea Otter PlaceCarlsbad, CA 92010 USA

Toll Free: 1 877 PRO SPOTPhone: +1 760 407 1414

Fax: +1 760 407 1421Email: [email protected]

Web: www.prospot.com