ULMATEC · 2013. 5. 15. · Mak), Cummins, Fleetguard, Parker, Pall and Onan. ... with the creation...
Transcript of ULMATEC · 2013. 5. 15. · Mak), Cummins, Fleetguard, Parker, Pall and Onan. ... with the creation...
-
T ECHNO
LOGY
-
ULMATEC ENERGY
Pyro™ WASTE
ENErGy mANAGEmENT
PoWEr SySTEmS
ULMATEC HANDLING
ULMATEC SERVICES
BAro™ SEiSmic
ToW coNfiGurATioNS
PrESSurE coNTrol AND
WEll iNTErvENTioN
SuB-SEA hANDliNG SySTEmS
coNSulTANcy
AND ENGiNEEriNG
comPoNENT SuPPly
ShiP SErviciNG
ThErmAl SPrAy
AND xylAN coAiTiNG
Ulmatec provides highly functional, and specialized marine
technologies for rigs and ships, developed to fulfill our
customer’s needs. Ulmatec’s contribution within complete
projects, system deliveries in close cooperation with
well-known naval architects, and third-party verification of
Ulmatec’s external deliveries, shapes safety and efficiency
on all marine operations.
OUR CONTRIBUTION MAKES A DIFFERENCE
-
Backed by solid experience and customer
feedback, Ulmatec designs and manufactures
power and energy-efficiency systems for
optimal functionality and cost.
Ulmatec provides custom-built central heating
and waste energy management, and power
generation solutions for the shipping and
offshore market.
ULMATEC ENERGYPOWER AND ENERGY-EFFICIENCY SYSTEMS
-
0706
While marine diesel and gas engines are
presently among the most efficient prime
movers, a substantial part of the energy
available in the fuel is typically discarded as
residual heat in the exhaust gas and in the
cooling water.
The recovery of this otherwise wasted energy
can lead to meaningful gains. Pyro™ waste
energy management mobilize this lost energy
for use on other applications, including the
warming of accommodation areas, de-icing of
decks, stairways and railings, tank heating and
ballast water treatment.
Up to 60% of the energy produced can be reuti-
lized, with financial and environmental gains.
And these benefits can be, through Ulmatec’s
integrated control system, easily documented,
stored and visualized by the charterer.
Through subsidiaries in the group, Ulmatec has
specialized in the design and manufacture of
custom-built power generation solutions for the
shipping and offshore market.
Ulmatec manufactures and delivers diesel and
gas generators for electricity production on
land, and generator and propulsion systems for
the marine and the offshore market.
Ulmatec is a dealer and a service partner for
propulsion machinery and spare parts for major
brands such as Mitsubishi, Pon Power (Cat and
Mak), Cummins, Fleetguard, Parker, Pall and
Onan.
PYRO™ WASTE ENERGY MANAGEMENTImproved ship efficiency through residual waste energy
POWER SYSTEMSCustom-built power generation solutions
Pyro™
TANk
hEATiNG
SySTEm
PoWEr
SySTEmS
Pyro™
iNciNErATor
Pyro™
WASTE
ENErGy
mANAGEmENT
-
Ulmatec provides tailor-made marine tools and
handling systems with improved performance and
increased safety, dedicated to the oil and gas industry.
Ulmatec’s highly-skilled engineering and project
teams have ensured the delivery of key components for
seismic tow configurations for more than three decades;
our teams are specialized in providing handling and
logistics solutions which meet the newer demands
for safer operations, faster heave compensation and
improved controls. Ulmatec also provides improved oil
recovery tools with superior reservoir contact.
ULMATEC HANDLINGMARINE TOOLS AND HANDLING SYSTEMS
-
1110
Through the renowned brand Baro™, Ulmatec
develops a wide range of specialized offshore
products for marine seismic acquisition. Baro™
has been the industry´s key supplier for more
than three decades.
The purpose designed products include the
Barovane™ marine seismic diverters. Baro™
also manufactures rigid source and optimized
handling systems. These products are developed
for minimizing damage to equipment and have
proven to increase safety and reduce downtime.
Further, a flexible float system and other key
key components for wide-tow configurations are
integrated parts of the portfolio.
PRESSURE CONTROL AND WELL INTERVENTION EqUIPMENTSuperior reservoir contact
OFFSHORE HANDLING SYSTEMSBetter performance – Increased safety
BARO™ SEISMIC TOW CONFIGURATIONSPartnership with the seismic industry
Ulmatec is a supplier of electric controlled
systems and pressure control equipment used
for well intervention. Equipment and panels
such as BOP and well control units, grease
injection skids and wireline winches. Pressure
test and flush units may be delivered according
to our customers unique specification.
Ulmatec offers a wide range of special
equipment for the sub-sea industry, and is
a leading supplier of electrically controlled
systems and machinery, such as active heave
compensated winches.
The company develops modern handling and
logistics solutions; launch and recovery systems
(LARS) for remotely operated vehicles (ROVs),
IMR-towers (Inspection, Maintenance, Repair),
skid and cursor systems for launch and recovery
over the shipside and through the moon pool,
from built-in hangars and from open deck.
Ulmatec handling systems ensure efficient
logistics on deck as well as safe launch and
retrieval of heavy modules and ROVs.
BAro™
SEiSmic ToW
coNfiGu-
rATioNS
rov
hANDliNG
SySTEmS
PrESSurE
coNTrol
AND WEll
iNTErvENTioN
offShorE
hANDliNG
SySTEmS
-
ULMATEC SERVICEINTERNATIONAL SHIP AND SYSTEM SERVICES
Ulmatec offers a wide range of services
within engineering and consultancy, ship
servicing and component supply both on
its own product-range and on a variety of
manufacturers.
Ulmatec offers its clients a complete
project life-cycle service, from initial
design concept and specification, through
system solution delivery and commis-
sioning, all the way to support and
maintenance.
Ulmatec provides specialist functional safety
expertise, front-end engineering design
and extensive consultancy services, and
supports clients globally, on-time and with
the quality needed. The group commands a
high proportion of in-house production, as
well as highly competent resources in the
centers of excellence, with many years of
close cooperation with the marine industry,
the oil and gas industry and the processing
industry.
-
1514
CONSULTANCY AND ENGINEERING Technology driven engineered solutions
COMPONENT SUPPLYHands on – from the smallest to the largest components
Ulmatec is also specialized in metal processing,
machining, assembly and industrial coating, a
large proportion of which within its own facil-
ities. Ulmatec has long industrial experience
and in-depth expertise, and offers complete
engineering and production solutions for all
components, from the smallest to the largest.
SERVICEProviding support on a world-wide level
Through its status as an independent company,
Ulmatec is free to provide support for
equipment of a variety of manufacturers, thus
offering the clients a single point of contact for
servicing marine technology. Whichever the
requirements for support, Ulmatec will provide
the solution world-wide.
ulmatec has at its disposal several service bases with deepwater quays and extensive infra- structures.
ulmatec is a dealer and service partner for propulsion machinery and for spare parts of major brands.
ulmatec maintains a large stock of new parts, along with a wide-ranging swap pool of parts exchange/ recondi-tioning.
ulmatec provides a complete diesel workshop for overhauling fuel pumps and nozzles with test benching of pumps, valves and nozzles.
Ulmatec provides feasibility studies, assistance
on user requirement specifications and request
for quotation specifications, benchmarking of
available hardware and software, and informed
recommendations for the best solution for any
specific requirement.
Ulmatec’s portfolio includes the capacity for
designing and producing integrated processing
central electrical systems, as well as integrated
information management systems.
Ulmatec has highly competent engineers and
designers with years of experience from offshore
and shipbuilding industries. This combined
with advanced software tools and a complete
product lifecycle management system makes us
able to undertake projects including;
conceptual Studies
Product and System design
finite Element Analysis
Technical calculations
Project management
Detail Engineering
New Ulmatec service base ready in 2013 Location: West coast, mid-Norway Area: 70 000 m2
-
1716
TromSø
GAmlEm
hArEiD
ulSTEiNvik
foSNAvåG
BErGEN
STAvANGEr
SPikkESTAD
SurNADAl
murmANSk
DuBAi
SiNGAPorE
ABErDEEN
roThErhAm
houSToN
ULMATEC LOCATIONS
2013
-
1918
The company name ulmatec is an abbreviation of ulstein marine
Technology AS, a company whose story can be traced back to 1917,
with the creation of ulstein mek verksted, which was later to became
the ulstein group. following the acquisition of ulstein by vickers and
rolls-royce, in 1999, a number of new marine businesses flourished
in the area, one of these being ulmatec. Established in 2000, ulmatec
is presently the parent company of a group of subsidiaries delivering
marine technology and services worldwide.
www.ulmatec.no
-
Ulmatec
AS | St
ålhauge
n 5 | No
-6065 ul
steinvik N
orWAy
| www.ul
matec.n
o