UL-94 High Flame Retardant V-0 Urethane Foam«˜難燃グレード...
Transcript of UL-94 High Flame Retardant V-0 Urethane Foam«˜難燃グレード...
高難燃グレード
マイクロセルポリマーシート「 」は、高密度で極めて微細、かつ均一なセル構造を有した高機能マイクロセルウレタンフォームです。長期間の使用でも劣化しにくく、シール材・クッション材・スペーサー・足ゴムなど全てのモノづくりの場面で重要な役割を果たします。
RX-32RXgrade
NEW
主な特長 Characteristics
高耐熱性 High Heat Resistance高温下(~110℃)でも抜群のヘタリにくさHigh performance that withstands temperatures up to 110°C.
低コスト Lower Costシリコーンフォームより安価。両面テープはアクリルテープが使用可能。Competitive price than silicone foam. The double-sided adhesive tape can be used with acrylic adhesive tape.
¥
高難燃性 High Flame Retardantウレタンフォームで“UL94 V-0”を取得・ノンハロ難燃Halogen-free flame-retardant UL 94 V-0 certified urethane foam.高難燃
高耐久性 High Durability長期使用に於いても抜群の物性安定性Outstanding property stability even after long periods of use.
電子機器、自動車、産業機器分野などの高難燃必要部のパッキン材、クッション材(バッテリー、モーター、電源、熱源周り、その他特殊部など)
低発生ガス・難燃シリーズ<RXグレード>は、ウレタン発泡体として“UL94 V-0”を取得したノンハロゲン超高難燃素材です。
用途例 Application
Hig
h Fl
ame R
etar
dant
High Flame Retardant V-0 Urethane Foam
RX-32 is a high flame retardant and halogen free grade which acquires UL94 V-0 standard.
, a micro-cell polymer sheet material, is a high-performance, high-density micro-cell polyurethane foam possessing an extremely fine and uniform cell structure. It experiences little deterioration even after long periods of use, and it can play an important role in all aspects of manufacturing applications, such as sealing, cushioning, gap-filling, and foot pad.
High FlameRetardant Grade
Cushion,gasket and dust sealing around a heat source such as battery, motor, power supply for electronics device and industrial equipment.
超高難燃V-0 ウレタンUL-94
エコ対応 Eco-Friendly植物由来成分を配合Includes plant-derived ingredients.
TEL(03)3492-9171TEL(052)583-4821TEL(06)7657-7980TEL(092)431-8323
http://www.inoac.co.jp/
本社 名古屋市中村区名駅南二丁目13番4号 〒450-0003 TEL(052)581-1098 FAX(052)581-4703Head Office 2-13-4 Meieki minami,Nakamura-ku,Nagoya 450-0003 TEL+81 52 581-1098 FAX+81 52 581-4703
東 京 支 店 Tokyo中 部 支 店 Chubu大 阪 支 店 Osaka九 州 支 店 Kyushu
札幌営業所東北営業所浜松営業所広島営業所
SapporoTohokuHamamatsuHiroshima
Manufactured by
http://www.PORON.jp/
9-117 Nashinoki,Taketoyo-cho,Chita-gun,Aichi 470-2309 TEL+81 569 74-1811 FAX+81 569 74-1812愛知県知多郡武豊町字梨子ノ木9番117 〒470-2309 TEL(0569)74-1811 FAX(0569)74-1812
TEL(011)851-7171 TEL(022)713-7121 TEL(050)3145-5811 TEL(082)535-4771
1F-12-1P1AJC
INOAC SuwonINOAC HongKong INOAC DongguanINOAC SuzhouINOAC TaipeiINOAC SingaporeINOAC ThailandINOAC Indonesia
TEL : +82-31-8002-3366TEL : +852-3910-4500TEL : +86-769-8617-6861TEL : +86-512-6280-7921TEL : +886-2-8994-2255TEL : +65-6877-9428TEL : +66-2-361-4450TEL : +62-21-350-4704
FAX : +82-31-8002-3367FAX : +852-2771-5190FAX : +86-769-8617-0268FAX : +86-512-6280-7923FAX : +886-2-8994-2266 FAX : +65-6877-9481FAX : +66-2-361-4451FAX : +62-21-351-9692
の特長である、高シール性・振動吸収性・寸法安定性などの高性能はそのままに、高難燃性を実現しました。
圧縮残留歪み(長期連続圧縮)
荷重-たわみ曲線
荷重 Stress(MPa)
0.14
0.12
0.1
0.08
0.06
0.04
0.02
00 5 15 25 35 4510 20 30 40 50
たわみ(圧縮率) Strain (Compression ratio)(%)
0 200 600 1000 1400 1800400 800 1200 1600 2000 2200 2400 2600 2800 3000
40
30
20
10
0
時間 Time(hr)
High Flame RetardantHigh Flame RetardantHigh Flame RetardantRX-32NEW
製品仕様
※◎…標準品 Available to order △…受注生産品 Available Product(250m2lots)
厚み Thickness (mm)
2.03.04.05.06.08.0
幅 Width (mm)
500〃〃〃〃〃
長さ Length (m)
505040302520
RX-32◎◎◎◎△△
一般物性
密度引張強度25%圧縮荷重
圧縮残留歪
難燃性
kg/m3
MPa
MPa
%
UL94
70℃
100℃
3200.500.060.52.5V-0
RX-32200ー0.0730≦30≦HF-1
※値は全て代表値です
3200.370.070.51.1V-0
Silicone foam
サンプル Sample
RX-32 3.0mm
圧 縮
圧縮残留歪み Compression set(%)
50
40
30
20
10
040 80 12020 60 100
温度 Temperature(℃)
試験条件/Test methodサンプルを50%圧縮し、各温度下で22時間放置。その後圧力を解放し、30分経過後に厚みを測定し、圧縮残留歪みを計算。Samples were compressed 50% and left at each temperature for 22 hours. Afterward, the pressure was released, and the thicknesses of the samples were measured after 30 minutes had passed to calculate compression set.
The high-performance characteristics of , includes material high flame retardant, in addition to high sealability, vibration absorption, and dimensional stability.
圧縮残留歪み(温度依存性) Compression set (temperature dependence)
Compression set (continuous long-duration compression)
RX grade
圧縮残留歪み Compression set(%) 試験条件/Test method
サンプルを50%圧縮し、80℃下で放置。所定時間経過後圧力を解放し、30分経過後に厚みを測定し、圧縮残留歪みを計算。Samples were compressed 50% and kept at 80°C. After the prescribed time had passed, the pressure was released. Then the thicknesses of the samples were measured after 30 minutes had passed to calculate compression set.
T0:試験前厚み T1:試験後厚み
圧縮残留歪み(%)=(T0-T1)/T0×100Compression set
Pre-test thickness Post-test thickness
試験サンプル(50×50mm)Test sample
Compress
試験条件/Test method圧縮速度1mm/分で圧縮し、荷重・たわみ曲線(S-Sカーブ)を測定。Compression was applied at a speed of 1 mm/min, and the stress-strain curve (S-S curve) was measured.
*All values are representative values.
Stress-strain curve
Physical properties Product availability
Compression set
Tensile strength
Density
25% CLD
Product gradeItem/unit
Heat resistance
Rubber sponge
UL94 V-0は2mm~8mmの範囲で取得しております。
T0:試験前厚み T1:試験後厚み
圧縮残留歪み(%)=(T0-T1)/T0×100Compression set
Pre-test thickness Post-test thickness
Products are avaliable worldwide. ● The specifications for this product are subject to change without notice.
Certified UL94 V-0 for thicknesses between 2mm and 8mm.
PE foam
CR sponge GeneralRX grade
Silicone foam
General
PE foam
CR sponge
RX grade
Silicone foam