UK PERKINS APS P1250 kVA - · PDF fileUK PERKINS APS P1250 kVA GENERATOR FEATURES ENGINE DATA...
Transcript of UK PERKINS APS P1250 kVA - · PDF fileUK PERKINS APS P1250 kVA GENERATOR FEATURES ENGINE DATA...
UK PERKINSAPS P1250 kVA
GENERATOR FEATURES
ENGINE DATA ALTERNATOR DATA
Manufacturer/Model
Cylinder Arrangement
Displacement
Bore And Stroke
Compression Ratio
Rated Rpm
Gross Bhp @ Prime Power
Gross Bhp @ S.By Power
Governor Type
UK Perkins, 4012-46TWG2A
012- 60 V
45.842 Litres
160 x 190 mm
13.6 : 1
1500
1492
1641
Manufacturer
Number of Phase
Power factor
Number of pole
Insulation
Temperature Rise
Total Harmonics (TGH/THC)
Exciter Type
Number Of Bearing
Leroy somer EU
3
0.8
4
Class H
Class F
< 2% (AT NO LOAD)
Shunt
One
POWER
FEATURES
Prime Power – 400/230V @ 50 Hz:1002 kW / 1253 kVA Stand by Power- 400/230V @ 50 Hz: 1108 kW / 1385 kVA
Ÿ Engine (UK Perkins 4012-46TWG2A)Ÿ 24v Charge alternator Ÿ Governor: Mechanical Ÿ Alternator (Mecc alte UK / Leroy somer TAL) Ÿ Single bearing alternator IP 23,insulation class H Ÿ Radiator 50° C (122 F) Ÿ Skid and vibration isolators Ÿ Dry type air filter Ÿ Main line circuit breaker Ÿ 24v Battery , Rack and Cable Ÿ Industrial silencer Ÿ User manual
OPTIONAL ITEMSEngine & Radiator
Ÿ Heat shield protection exhaustŸ Oil drain extensionŸ Lube oil drain pumpŸ Stone Protection guardŸ Battery chargerŸ Engine Block heaterŸ Battery Isolator
Fuel SystemŸ 12 or 24 Hours day tankŸ Bulk fuel tank connections Ÿ Fuel / Water separator filter (Racor)
AlternatorŸ Anti-Condensation HeaterŸ Alternator Dust FiltersŸ PMG excitationŸ Single phase
ExhaustŸ Residential, Critical SilencerŸ Flexible exhaust connection
EnclosureŸ EM-1,5 Ÿ 85 dBA @ 1m Ÿ Dimension mm (L x W x H) – 12192 x 2438 x 2895
Control PanelŸ Deep sea Electronics
* For more technical information, please refer to the website below.
RPP: Prime Power is available for an unlimited number of annual operating hours in variable load applications, in accordance with ISO 8528-1. A 10% overload capability is available for a period of 1 hour within 12hour period of operation, in accordance with ISO 3046-1. ESP: The standby power rating is applicable for supplying emergency power in variable load applications in accordance with ISO 8528-1. Overload is not allowed
Picture shown above is only for illustration purpose, May contain optional item. In Line with Our Policy of Continuous Development, We reserve The Right to Change Specification without Notice
Electronic
www.apsuae.com