UK-Custom made solution of organo metallic standards in an organic oil Quotation request
-
Upload
stephane-schein -
Category
Documents
-
view
213 -
download
0
description
Transcript of UK-Custom made solution of organo metallic standards in an organic oil Quotation request
Volume:100 or 250 ml
Number of bottles :
PRINT THIS PAGE AND SEND BY FAX TO
0208 950 1603 FOR AN IMMEDIATE QUOTATION
• Those custom-made multi-elements are soluble in aromatic and paraffinic hydrocarbides such as mineral oils, xylene and cetones as MIBK.• To manufacture those solutions, we use organometallic mono-elements, their concentration is 5000 ppm, 2000 ppm for the Sc, 100 ppm for AS, Hg and Se.• The different concentrations are measured by gravimetry (precision lower than +/- 2%) and controled by ICP.
Company:
Name:
Tel:
Fax:
Email:
Date:
Custom Made Solution of Organo-Metallic Standards in an Organic Oil Quotation Request
(for ICP, AAS, Fluorescence X, Rotrode electrode emission)
ACN CHEMICALS UK Ltd. - Second Floor, 27 Gloucester Place, London, W1U 8HU, United KingdomTel: +44 (0) 207 193 9114 - Fax:+44 (0) 208 950 1603 - Email: [email protected] - Web: www.spectracer.co.uk
Elem. Conc.mg/kg
Elem. Conc.mg/kg
Elem. Conc.mg/kg
Elem. Conc.mg/kg
Elem. Conc.mg/kg
Ag Cd La Pb Ti
Al Co Li S V
As Cr Mg Sb W
B Cu Mn Sc Y
Ba Fe Mo Se Zn
Be Hg Na Si Other
Bi In Ni Sn Other
Ca K P Sr Other
‣Choose your elements indicating their concentration in mg/kg‣ Indicate the nature of the base oil, the nature of the oil blank if necesary, the mass in the bottle and the number of
bottles required.
Mix OilOil - 20 Oil - 75
or other mix
Oil BlankOil - 20Oil - 75
Mass in bottle
(100g, 200G or other)
Number of bottles
Reference Density 25°C
Viscosity cSt
Pour Point °C
Flash Point °C
Trace level
Oil - 20 0.84-0.86 14-18 at 40°C -7 (+20) 175 mini. <0.10 ppm
Oil - 75 0.86-0.89 65-72 at 40°C -15 (+20) 215 mini. <0.15 ppm
Specification of oil base for the preparation of mixes