UHK-430 White paper
Transcript of UHK-430 White paper
Ikegami Tsushinki Co., Ltd.
Sept 2016
UHK-430 – The Latest Technology
1
INTRODUCTION
4K native sensors and a 3-chip prism deliver an ove rwhelming sense of
resolution. Compatible with B4 mount HD lenses, whi ch are widely used by
broadcasters and production houses, the UHK-430 ena bles high resolution 4K
shooting without wasting existing assets.
This document explains the latest innovative techn ologies employed in the
UHK-430 including its newly developed 2/3-inch nati ve 4K CMOS sensors and
next generation high speed video processor, AXII.
2
Table of Contents
1. Sensors --------------------------------------- ----------------------------------------------- 3
2. Comparison of Imaging Technology ------------------ ----------------------------- 5
3. High Speed Video Processor - AXII - ------------------------------------------ 9
4. Transmission Bandwidth ------------------------ ------------------------------------ 12
5. Future Expansion ------------------------------ ----------------------------------------- 13
6. Multi Interface ------------------------------- --------------------------------------------- 14
7. VoIP ----------------------------------------------------------------------------------------- 16
8. HDR ----------------------------------------------------------------------------------------- 20
9. Mechanical Design ----------------------------- ---------------------------------------- 24
10. Focusing advantage----------------------------- --------------------------------------- 29
3
1. Sensors
We have developed an image sensor to produce a nati ve 4K camera supporting
the 2/3 - inch bayonet lens mount. Compared with conven tional 2K image
sensors, 4K image sensors have 1/2 the pixel-pitch and 1/4 the total pixel area.
To achieve high performance 4K pixels, we needed to develop the sensor with
focus on its sensitivity, S/N and dynamic range.
The UHK-430 employs newly developed 2/3" 4K sensors .
They feature improved sensitivity thanks to an anti -
reflection coating on both sides of the cover glass .
The coating also minimizes the unwanted ghost
effects.
Image of cover glass
= AR coating
= cover glass
For further sensitivity improvement, the sensor has been designed with a
suitable micro-lens. It prevents the loss of sensi tivity when the iris is open.
Also thanks to the minimization of parasitic capaci tance of the floating diffusion
layer, the light to voltage conversion gain has bee n improved. Micro lens Floating Diffusion
4
Specifications for Image Sensor
5
2. Comparison of Imaging Technology
The UHK-430 employs 3 x CMOS sensors taking picture quality into
consideration. The following is a comparison among imaging types.
■ 3CMOS vs Single chip Bayer
-1. 3 chips with prism block
*RGB 4:4:4 output
-2. Single chip Bayer
*Resolution : 1/2G, 1/4R, 1/4B, 2:1:1
*De-Bayer process is required to create R/G/B compo nent signals
*To compensate the reduced pixel quantity, pixels m ust be interpolated
from adjacent pixels, meaning:
→→→→ less resolution
→→→→ Creates Aliasing
Single chip Bayer does not produce a full 4K signal , so resolution and
color reproduction are not as good as a 3chip model .
6
-3. Advantage of Native 4K 3CMOS against Single Ch ip Sensor
・・・・Sensitivity
In the case of the Single-Chip Sensor, the wavelen gth region for each RGB
color channel is created by the On-Chip filter, so, the light in the wavelength
region where it is not intended is not used.
In contrast, in the case of the 3-Chip Sensor block , light is split by a prism,
separating the light by wavelength region for each image sensor of RGB.
All of the light for each color is directed to the corresonding sensor, resulting
in higher light utilization.
So, a camera with better S/N and sensitivity can be achieved with a 3-Chip
Sensor block.
・・・・Resolution
3CMOS achieves full resolution in RGB.
Single chip Bayer achieves 4K resolution by De-Baye r process, but the
resolution for any single color of RGB is equal to 2K.
・Aliasing
Various kinds of Interpolation algorithm are being developed regarding the
De-Bayer process, but, we can say it is difficult t o reconcile getting higher
resolution and less aliasing. If the optical low pa ss filter is specified for 4K
resolution, then spacial frequencies exceeding the Nyquist limit will produce
aliasing in the color channels, especially the R an d B channels.
Conversely, if the optical low pass filter is speci fied to limit aliasing, 4K
resolution in luminance can not be achieved.
7
■ Native 4K sensor vs 2K pixel shift
Pixel shift is a method to increase resolution by s hifting the sensor pixels with
half pixel (half pitch) to interpolate the spacial information. There are two
methods, 3 chip pixel shift and 4 chip pixel shift.
-1. Advantage of pixel shift
*Limiting resolution in luminance signal is improve d.
-2. Disadvantage of pixel shift
*Sensor size remains unchanged, so R/G/B MTF is the same as that of 2K.
*3 chip pixel shift has significant loss of the ef fect because of lens
abberation, the limiting resolution does not improv e in the corners.
-3. Advantage of Native 4K 3CMOS againest 2K pixel shift
・・・・Resolution
Pixel shift is a method to increase resolution by s hifting pixels between 2K
image sensors by half pitch, complementing spatial information. There are
two methods for pixel shift. One is 3-Chip Pixel Sh ift, shifting the G-ch
image sensor half pitch compared to R/B , and anoth er is 4-Chip Dual G
(R,B,G1,G2),using two G-ch sensors.
Reduction of Aliasing by the pixel shift or dual Green
2K CMOS Aliasing Response limitation
2K CMOS Aliasing
4K MOS Aliasing
1000
4K CMOS Resolution
2K CMOS Resolution
2000 4000
Aperture 50%
(TVL)
0
0.5
0
(Response) 1
Sensor Response
8
However, with both methods, it is not possible to g et 2 times the resolution
by shifting half pitch due to the following reasons .
Recent image sensors have higher aperture ratio for each pixel for higher
sensitivity, and the signal for spatial direction i s output as the integral
value of the pixel area.
So neighboring pixels at intervals of half pitch have some redundent ligh t
reception resulting in only 1.6 times the resolutio n even if every pixel is
ideally shifted by half pitch.
Especially, in the case of pixel shift with RGB cha nnels, even though there
is increased resolution at the center of the screen , the resolution does not
improve in the corners due to influence of chromati c aberration. And even
if the aberration is corrected in the camera DSP, i t is too late to improve the
spacial sampling of the incoming light.
・・・・Sensitivity
In the case of pixel shift with dual G channels and 4-Chip, the light is split
into two G channels by a half mirror, so, the sensi tivity is lowered to 1/2.
Moreover, the limiting F-value for most 3-Chip pri sms is F1.4, but in the
case of a 4-Chip prism, it is difficult to achieve F1.4 due to the prism
structure.
Therefore, if you use a lens having brighter maxim um aperture, there may
be no benefit due to the limitation of the dual G p rism.
9
3. High Speed Video Processor - AXII -
Ikegami has developed a processing engine
for its next-generation HD, 4K and 8K
format cameras. This ASIC can perform high speed
processing of HD, 4K (4 x HD) and 8K (16 x HD)
super high-resolution video signals in various
formats and frame rates. The new processor,
called AXII incorporates features and interfaces
for broadcast camera systems. It delivers high
quality,high reliability and lower power consumptio n.
This AXII processor will be used as a platform AXII processor
to accelerate product development.
■ Features
- High Speed Signal Processing and Added-Value Featur es
Video processing is the core function of a camera's internal electronics. It
controls each correction circuit and the interface to external units such as lens
and viewfinder. High speed processing is needed to handle standards such as
HD, 4K and 8K.
- Built-in 16-Axis Color Correction
Chroma and hue level can be adjusted within 16-axes individually, for both
normal programme production and to allow color-matc hing with other cameras.
This high-level correction can be processed in real time.
10
- 3D-LUT Color Gamut Correction
The ITU-R BT.2020
standard for 4K/8K covers
a wider area than BT.709 for
HD. The new Ikegami
processor conforms to ITU-
R BT.2020 and provides
color gamut correction for
varrious video formats with
a 3D-LUT system.
16-axis color matrix Original Color corrected as image
11
- DDR3 Configuration
Using DDR3 SDRAM, lens chromatic aberration and noi se suppression features
become available. Digital Extender, video frame rat e conversion and viewfinder
picture-in-picture are also supported.
Picture- in-Picture Digital Extender
- Low Power Consumption and High Reliability
Camera system tasks such as video signal manipulati on, shading correction, lens
aberration correction, and interfacing between devi ces are all integrated in the
new processor. The processor allows high performanc e, low-power consumption
(40% lower than conventional model), lower operatin g temperature, and higher
reliability.
- Ikegami Cameras Processing Platform
The new processor will be implemented as the core o f new generation Ikegami
broadcast and POV cameras, significantly reducing d evelopment time and thus
ensuring prompt release of new products to the mark et.
12
4. Transmission Bandwidth
4. ssioandwidth
The transmission bandwidth between the UHK-430 came ra head and the CCU-430
Camera Control unit is optical 40Gbps. Thanks to th is, the video signal from the
Image sensor block is transmitted to the CCU with u ncompressed 4:4:4 signal.
The 4K video singal processing is done at the CCU. This means the processing such
as lens abberation correction, DTL and color matrix are processed inside the CCU. It
is ideal to have uncompressed video signals availab le to these video processing
circuits – this is the reason why we employ 40Gbps bandwidth for the transmission
system..
In case the transmission is made with 4:2:2 bandwid th, it affects the chroma key
performance because the bandwidth of the color diff erence (Pb/Pr) signals is
restricted. Even when the output from the CCU is 4: 2:2, the 4:4:4 uncompressed
transmissiion produces better quality than compress ed 4:2:2 transmission. Our
40Gbps transmission system is transmitted as 4 x 10 Gbps with WDM (Wavelength
Division Multiplex). It has the advantage of extend ed bandwidth, and has no
disadvantage such as loss of transmission distance compared to other 10Gbps
transmission systems.
Signal Path between Camera and CCU
13
5. Future Expansion
More complete functionality
The two piece construction provides good system fle xlibility, allowing you to
select a suitable optical block for your chosen app lication.
The ultra wide bandwidth fiber transmission achieve s the world's first
transmission of an uncompressed 4K signal.
The UHK-430 is designed as a system that delivers m ore complete functionality
to meet a wide range of operational requirements.
The unique two piece construction allows for easy s wap of the optical sensor
unit, such as an extension adaptor (to separate the optical head from the main
camera body) to meet different and future applicati ons.
Sensor unit and body extension aapor (Scheduled )
HFR (Scheduled)
14
6. Multi Interface
4K output (3G-SDI x4) is available as standard. It is selectable between Quad Link
Square Division and 2 Sample Interleave (Level-A/B) .
Also, 4K/2KHD simultaneous output and 2K HD cut-out from the 4K image is
available (Option).
Moreover , the CCU-430 Camera Control Unit has been designed takin g into
consideration that it would support 12G-SDI, Simult aneous-Output and VoIP
interface etc. by swapping the rear plug-in module. So it has flexibility to support
future trends for 4K systems.
■ 12G-SDI Option Board
12G-SDI Option Board
It is possible to switch the outputs between 12G-SD I and 3G-SDI Quad Link.
The board is selectable among following three types according to customer’s
application.
1) 12G-SDI x8
2) 12G-SDIx4 + 3G-SDIx4
3) 3G-SDIx4 + 3G-SDI x4
Transmission Length for 12G-SDI Signal: Approx 70m (When using a low loss
coaxial cable)
*The transmission lengthwill change depending on th e type and manufacture of
the coaxial cable and the specification of the devi ce receiving the 12G-SDI
signal.
15
■ Simultaneous-Output Option Board
HD_OUT Board
VP_OUT Board (STD)
By mounting HD_VP Board on CCU front side and HD_OU T Board on rear, 4K/2K
simulcast is available.
From VP_OUT Board : 4K Quad Link 2 CH 8 Output (OUT -1/OUT-2)
From HD_OUT Board: HD/3G-SDI 2 CH 8 Output (OUT-3/O UT-4)
From HD/3G-SDI from HD_OUT Board, down-converted si gnal and HD cut-out signal
from 4K can be output simultaneously.
Option Board Output Chart 4K Quad
LinkOutput
4K 12G-SDI
Output
HD D/COutput
HD Cut-Out
Output
HD D/C+Cut-outSimul-
4K&2Ksimul-
Out
Standard ✓ ✓
With Simul-Out OptionBoard
✓ ✓ ✓ ✓ ✓
12G_OutOption Board
✓ ✓ ✓
12G_Out OptionBoard + Simul-Out OptionBoard
✓ ✓ ✓ ✓ ✓ ✓
■ VoIP Option Board
The VoIP board capsulises the main video and audio signals, transmitting them
as a packet. VoIP transmission is available by an optional board.
16
7. VoIP
Transporting separate video, audio, and metadata as independent IP multicast
streams is essential in order to realize IP-based b roadcast and media facilities
through the integration and interoperability of an open format.
As of April, 2016, Ikegami has joined alliances for IP media solutions such as,
AIMS, ASPEN, and TICO, facilitating transition to I P based systems design.
Flexibility and scalable mechanism in the IP techno logies are the key to handle
higher resolutions such as 4K and 8K and higher fra me rates such as 50/60P and
even 100/120P. They would also offer the most inte lligent solutions in light of
High Dynamic Range and Wider Color Space.
Ikegami products will be compliant to the following formats and standards,
supporting device discovery mechanism such as AMWA NMOS (Networked
Media Open Specifications) and Precision Time Proto col (PTP) timing
mechanism, distributed to endpoints by ST 2059-2 pr ofile IEEE1588v2 PTP.
AIMS (the Alliance for IP Media Solutions)
SMPTE 2022-5/6/7 of IP standards (video)
AES-67 (audio)
VSF (Video Services Forum) TR (Technical Recomme ndation)-03, -04
ASPEN (Adaptive Sample Picture Encapsulation)
SMPTE 2022 family of IP standards (video)
SMPTE ST 302 (audio over TS)
SMPTE ST 2038 (ancillary data over TS)
17
o
n)
18
* video, audio, and metadata as independent IP mult icast streams
Precision Time Protocol (PTP)
SMPTE 2022-7 of IP standards (hitless swithover)
Station timing will be distributed to endpoints by ST 2059-2 profile
IEEE1588v2 PTP
<4K PROCESSING (ASPEN & TICO) >
Ikegami is commited to provide native (rather than through transcoders) device
support for ASPEN for uncompressed 4K media exchang e,
and TICO for light weight, low latency compressed m edia exchange.
TICO (intoPIX© proprietary CODEC)
Light weight, low latency 4K compressed media ex change
19
VC-2 (Snell Advanced Media© proprietary CODEC)
Light weight, low latency 4K compressed media ex change
ASPEN (Adaptive Sample Picture Encapsulation)
Uncompressed 4K media exchange
10GBase-X / 1GBase-T Ethernet
SMPTE 2022-6/7 ST2059-2 profile IEEE1588v2 PTP (Presision Time Protocol ) *TBA:AMWA NMOS (Newtork media Open Spesicfications)
Monitor
ENGINEERING
REMOTE ROUTING SWITCHER
Production Swither
20
8. HDR
The International Telecommunication Union (ITU) ado pted HLG (Hybrid Log
Gamma) and PQ (Perceptual Quantization) as HDR formats in July 2016. The
features of the formats are as follows.
1. Hybrid Log Gamma – recommended for broadcast
The UHK-430 set for HDR matches the 1200% dynamic r ange of the HLG standard.
It is suitable to minimize the information loss of the camera video signal. The
curve figure after scaling is overwrapped to REC709 , and it starts to curve around
10% of voltage level, so it has the advantage to co mfortably operate with the VF
and standard monitors by adjusting only contrast.
21
2. PQ (Perceptual Quantization) and iLog – recommen ded for NLE
PQ will be the main curve for Disk packaging to Ult ra HD Blu-Ray. For Disk
packaging, it may be possible to produce up to 4000 nits by expanding the
dynamic range. Cineon WorkSpace is a popular worksp ace, and it can convert to
PQ at the output. The material is required to have a Log curve that will match
Cineon Log for easy grading. Also it is important t o minimize the information loss
of the camera video signal. For this, Ikegami offer s iLog.
iLog is designed to work with Cineon WorkSpace effe ctively by setting several
primary data , and it can be used with the assets s uch as LUT and Profiles.
Also, for Hybrid Log Gamma, by using a LUT (Look Up Table) converted by iLog,
it can be graded by Cineon WorkSpace.
3. HDR monitoring
Looking at an SDR monitor with an HLG signal, the p icture will look like
reference white is low. The camera operator can mak e the dynamic range setting
and shot-angle decision by adjusting the contrast o f the VF or monitor. Also
because the reference white becomes lower, it may b e difficult to monitor 100%
reference. But iris adjustment will be practical by setting the Zebra to the
reference white of HLG. However, when a video engi neer adjusts the video level,
it is recommended to use an HDR monitor.
An important factor with the HDR monitor is to chec k the full dynamic range of
the material. With HLG the dynamic range can be che cked as the peak luminance
of the HDR display can be set by OOTF (Opto-Optical Transfer Function).
In general, it is ideal to do production with 100ni ts peak luminance. But for the
HDR montor at home, the peak luminance will be high er, including Disk
packaging made with PQ with up to 4000 nits brigh tness. So in these cases
you need an HDR monitor with high peak luminance. Depending on the
application, 2000 nits may be okay.
22
4. HDR Camera System
Two types of HDR production may be made - Only HDR and HDR + SDR.
For HDR only, it needs not only higher luminance bu t also wider color gamut.
Therefore, HDR Gamma and wide gamut ITU-2020 must b e used together.
For HDR + SDR, the video adjustment should be made respectively as they have
different luminance and gamut. But it may be the c ase that HDR is the main
signal and SDR is tone mapped with basic adjustment . Or SDR may be main and
HDR is only with basic adjustment.
SDR tone mapping will be provided separately.
23
24
9. Mechanical Design
Ergonomic Design
・・・・Light Weight, Low CG (Center of Gravity)
The UHK-430 is a fully new designed Native 4K camer a with new technologies
to keep the same weight as the Unicam HD series. Th e UHK-430 has a very low
CG (Center of Gravity) for stable operation.
Height of CG = 133mm (5.2 inch)
Height of Optics = 94mm (3.7 inch)
・・・・Adjustable Shoulder Pad
The shoulder Pad is newly designed to improve camer a operation. Soft
cushion material is covered by a grippy outside sur face. 35mm (1.4 inch) slide
mechanism enables good balance with heavy 4K lens.
*Slide range of the HDK-97A : 20mm (0.8 inch)
35mm
25
・・・・Visibility of operator
The UHK-430’s body and handle are designed to impro ve visibility for the
camera operator. The camera operation has an incre ased view of the
opposite side because of the low profile of the fro nt of the camera.
26
・・・・Cooling System
The internal structure of the camera is designed wi th thermofluid simulation
for an optimal cooling system. The camera has a la rge 60mm cooling fan for
the combination of low noise and competent air flow .
Diam:52mm
HDK-97A UHK-430
Diam:60mm
Air Flow Image
27
・・・・New Tripod Adaptor T-430
- Eliminates backlash while maintaining compatibility with prior
Ikegami cameras. (*1)
- Quick mount / release mechanism without clicking no ise.
- Long-Life holding mechanism by improved spring.
- Stylish design in the same dimensions as the previo us model.
(*1) : New camera feet fits both T-430 and T-
791, but conventional feet do not fit T-430.
28
・・・・SE-U430
- Quick lens mounting or removal with camera in SE -430.
- Toolless adjustment mechanism for perfect optica l axis alignment.
29
10. Focusing advantage
4K Focus Assist
Everybody knows 4K video shooting requires more rig orous focusing than HD.
The UHK-430’s Focus Assist generates peaking edges from the original 4K
video and superimposes it to a 2K HD video signal f or the VF. It allows
extracting peaking edges at a higher frequency, and it helps the camera
operator to keep precision focusing for the 4K imag e.
****The color of the peaking edge signal can be customi zed.
30
UHK-430 – The Latest Technology
1st Edition: September 2016
Published in Marketing Department
Ikegami Tsushinki Co., Ltd.
© September 2016 Ikegami Tsushinki Co., Ltd.
- All rights reserved.
Reproduction or duplication, without permission of
Ikegami Tsushinki Co., Ltd. of editorial or pictorial content in whole or
in part, in any manner, is prohibited.
- Specifi cations and design are subject to change without prior notice.
- E & O.E
31