NoTouch®

Technology

UB-1TF UniversalTouch Free Button

We protect the things that protect you.®

NOTESIt is important to read, understand and follow all instructions provided with this product. It is the installer’s responsibility to comply with NFPA 70 & 101, NEC, mounting specifications according to ADA and other applicable electrical codes. To avoid electrical shock, DO NOT attempt to install this product when power is on. ADA mounting compliance requires the operable part of the initiating device shall not be less than 3 1/2 ft. (1.1m ) or greater than 4 1/2 ft. (1.37m) above finished floor surface. After installation and testing are complete, provide a copy of this manual to all personnel responsible for testing and maintenance of this product.

POWER Switch: Input: 12 VDC ± 15% Standby Power: 15 mA Active: 25 mA Operating temperature: -4° to 158°F (-20° to 70°C) Message LED: 12-24 VDC Form “C” contact rating: 30 VDC, 1A

- 2 -

4.80 in.(122mm)

3.22 in.(82mm)

6.31 in.(160mm)

.75 in.(19mm)

.77 in.(20mm)

4.80 in.(122mm)

3.22 in.(82mm)

6.25 in.(159mm)

.75 in.(19mm)

.77 in.(20mm)

POWER IN12-30 VDC/VAC

ú +

ACOLOR CODE:REDBLACK

GREENBLUEWHITE

+12 VDC-12 VDC

N.O.COMN.C.

INSERT PLUG INTO SWITCH WITHRIBS IN THIS DIRECTION

DETAIL A

POWER IN12-30 VDC/VACú +

NC

COM

NO

MAG LOCK

UB-1L LED PCB

UL Listed

NORMAL POSITION BUTTON ACTIVATED

MAGNETIC LOCKBUTTON LAMP

MESSAGE LAMP

ONGREEN

OFF

OFFREDON

+

+

+

UB-1L LED PCBNYLON WASHER

SELF TAPPING SCREW

12

3 4

SCREWDRIVER

Power In12ú30 VDC/VAC

Safety Tech. Int l Inc.P/N UB-11. Ver 1.0wwyy

DIFFUSER

ALIGN TABSTO NOTCHESON BUTTON

LENS

SWITCH NUT

DIFFUSER

MESSAGE LENS

BUTTON LENS

CONTACT LATCH TIME ADJUSTMENT:CLOCKWISE - LONGCOUNTERCLOCKWISE - SHORTRANGE: ~0.5 ~ 60 sec.

ACTIVATION RANGE ADJUSTMENT:CLOCKWISE - CLOSECOUNTERCLOCKWISE - FARRANGE: ~0.4 ~ 4 INCHES ~1 ~ 10 CM

12-24VDC Power Supply

#6 - 32 x 1 in. OVALHEAD MACHINE SCREW(2) PROVIDED

GREENBLUE

WHITEBLACK

RED

N.C.COM

+12VDCGNDN.O.

EXITDEVICEINPUT

UB-1TF LED

Message lit with button LED red

GREENBLUE

WHITEBLACK

RED

N.C.COM

+12VDCGNDN.O.

EXITDEVICEINPUT

UB-1TF LED

Message lit with button LED red

GREENBLUE

WHITEBLACK

RED

N.C.COM

+12VDCGNDN.O.

EXITDEVICEINPUT

UB-1TF LED

Message lit with button LED green

GREENBLUE

WHITEBLACK

RED

N.C.COM

+12VDCGNDN.O.

EXITDEVICEINPUT

UB-1TF LED

Message lit with button LED green

1. TO CHANGE BUTTON COLOR AND ROUND MESSAGE

1. Choose button color. If same as existing, proceed to 2.2. a. Loosen nut on back of switch, and push switch through plate far

enough to grasp button from back edge and remove button lens. b. Push switch back into plate and tighten nut. Be careful not to over-

tighten. 3. Select color lens. Align notches on button with tabs on switch and push until it

snaps together.

1. Remove LED circuit board.2. Remove current message by pushing in and

down on tabs 1 and 2 with a small screwdriver. If necessary, also push in and down on tabs 3 and 4. Once message is loose, remove from the front of the plate.

3. Select new message and snap into place. Blank plates are included to create your own custom message.

2. CHANGE TOP MESSAGE (Refer to notes on pg. 2 for “EMERGENCY” message use.

- 3 -

4.80 in.(122mm)

3.22 in.(82mm)

6.31 in.(160mm)

.75 in.(19mm)

.77 in.(20mm)

4.80 in.(122mm)

3.22 in.(82mm)

6.25 in.(159mm)

.75 in.(19mm)

.77 in.(20mm)

POWER IN12-30 VDC/VAC

ú +

ACOLOR CODE:REDBLACK

GREENBLUEWHITE

+12 VDC-12 VDC

N.O.COMN.C.

INSERT PLUG INTO SWITCH WITHRIBS IN THIS DIRECTION

DETAIL A

POWER IN12-30 VDC/VACú +

NC

COM

NO

MAG LOCK

UB-1L LED PCB

UL Listed

NORMAL POSITION BUTTON ACTIVATED

MAGNETIC LOCKBUTTON LAMP

MESSAGE LAMP

ONGREEN

OFF

OFFREDON

+

+

+

UB-1L LED PCBNYLON WASHER

SELF TAPPING SCREW

12

3 4

SCREWDRIVER

Power In12ú30 VDC/VAC

Safety Tech. Int l Inc.P/N UB-11. Ver 1.0wwyy

DIFFUSER

ALIGN TABSTO NOTCHESON BUTTON

LENS

SWITCH NUT

DIFFUSER

MESSAGE LENS

BUTTON LENS

CONTACT LATCH TIME ADJUSTMENT:CLOCKWISE - LONGCOUNTERCLOCKWISE - SHORTRANGE: ~0.5 ~ 60 sec.

ACTIVATION RANGE ADJUSTMENT:CLOCKWISE - CLOSECOUNTERCLOCKWISE - FARRANGE: ~0.4 ~ 4 INCHES ~1 ~ 10 CM

12-24VDC Power Supply

#6 - 32 x 1 in. OVALHEAD MACHINE SCREW(2) PROVIDED

GREENBLUE

WHITEBLACK

RED

N.C.COM

+12VDCGNDN.O.

EXITDEVICEINPUT

UB-1TF LED

Message lit with button LED red

GREENBLUE

WHITEBLACK

RED

N.C.COM

+12VDCGNDN.O.

EXITDEVICEINPUT

UB-1TF LED

Message lit with button LED red

GREENBLUE

WHITEBLACK

RED

N.C.COM

+12VDCGNDN.O.

EXITDEVICEINPUT

UB-1TF LED

Message lit with button LED green

GREENBLUE

WHITEBLACK

RED

N.C.COM

+12VDCGNDN.O.

EXITDEVICEINPUT

UB-1TF LED

Message lit with button LED green

4.80 in.(122mm)

3.22 in.(82mm)

6.31 in.(160mm)

.75 in.(19mm)

.77 in.(20mm)

4.80 in.(122mm)

3.22 in.(82mm)

6.25 in.(159mm)

.75 in.(19mm)

.77 in.(20mm)

POWER IN12-30 VDC/VAC

ú +

ACOLOR CODE:REDBLACK

GREENBLUEWHITE

+12 VDC-12 VDC

N.O.COMN.C.

INSERT PLUG INTO SWITCH WITHRIBS IN THIS DIRECTION

DETAIL A

POWER IN12-30 VDC/VACú +

NC

COM

NO

MAG LOCK

UB-1L LED PCB

UL Listed

NORMAL POSITION BUTTON ACTIVATED

MAGNETIC LOCKBUTTON LAMP

MESSAGE LAMP

ONGREEN

OFF

OFFREDON

+

+

+

UB-1L LED PCBNYLON WASHER

SELF TAPPING SCREW

12

3 4

SCREWDRIVER

Power In12ú30 VDC/VAC

Safety Tech. Int l Inc.P/N UB-11. Ver 1.0wwyy

DIFFUSER

ALIGN TABSTO NOTCHESON BUTTON

LENS

SWITCH NUT

DIFFUSER

MESSAGE LENS

BUTTON LENS

CONTACT LATCH TIME ADJUSTMENT:CLOCKWISE - LONGCOUNTERCLOCKWISE - SHORTRANGE: ~0.5 ~ 60 sec.

ACTIVATION RANGE ADJUSTMENT:CLOCKWISE - CLOSECOUNTERCLOCKWISE - FARRANGE: ~0.4 ~ 4 INCHES ~1 ~ 10 CM

12-24VDC Power Supply

#6 - 32 x 1 in. OVALHEAD MACHINE SCREW(2) PROVIDED

GREENBLUE

WHITEBLACK

RED

N.C.COM

+12VDCGNDN.O.

EXITDEVICEINPUT

UB-1TF LED

Message lit with button LED red

GREENBLUE

WHITEBLACK

RED

N.C.COM

+12VDCGNDN.O.

EXITDEVICEINPUT

UB-1TF LED

Message lit with button LED red

GREENBLUE

WHITEBLACK

RED

N.C.COM

+12VDCGNDN.O.

EXITDEVICEINPUT

UB-1TF LED

Message lit with button LED green

GREENBLUE

WHITEBLACK

RED

N.C.COM

+12VDCGNDN.O.

EXITDEVICEINPUT

UB-1TF LED

Message lit with button LED green

4.80 in.(122mm)

3.22 in.(82mm)

6.31 in.(160mm)

.75 in.(19mm)

.77 in.(20mm)

4.80 in.(122mm)

3.22 in.(82mm)

6.25 in.(159mm)

.75 in.(19mm)

.77 in.(20mm)

POWER IN12-30 VDC/VAC

ú +

ACOLOR CODE:REDBLACK

GREENBLUEWHITE

+12 VDC-12 VDC

N.O.COMN.C.

INSERT PLUG INTO SWITCH WITHRIBS IN THIS DIRECTION

DETAIL A

POWER IN12-30 VDC/VACú +

NC

COM

NO

MAG LOCK

UB-1L LED PCB

UL Listed

NORMAL POSITION BUTTON ACTIVATED

MAGNETIC LOCKBUTTON LAMP

MESSAGE LAMP

ONGREEN

OFF

OFFREDON

+

+

+

UB-1L LED PCBNYLON WASHER

SELF TAPPING SCREW

12

3 4

SCREWDRIVER

Power In12ú30 VDC/VAC

Safety Tech. Int l Inc.P/N UB-11. Ver 1.0wwyy

DIFFUSER

ALIGN TABSTO NOTCHESON BUTTON

LENS

SWITCH NUT

DIFFUSER

MESSAGE LENS

BUTTON LENS

CONTACT LATCH TIME ADJUSTMENT:CLOCKWISE - LONGCOUNTERCLOCKWISE - SHORTRANGE: ~0.5 ~ 60 sec.

ACTIVATION RANGE ADJUSTMENT:CLOCKWISE - CLOSECOUNTERCLOCKWISE - FARRANGE: ~0.4 ~ 4 INCHES ~1 ~ 10 CM

12-24VDC Power Supply

#6 - 32 x 1 in. OVALHEAD MACHINE SCREW(2) PROVIDED

GREENBLUE

WHITEBLACK

RED

N.C.COM

+12VDCGNDN.O.

EXITDEVICEINPUT

UB-1TF LED

Message lit with button LED red

GREENBLUE

WHITEBLACK

RED

N.C.COM

+12VDCGNDN.O.

EXITDEVICEINPUT

UB-1TF LED

Message lit with button LED red

GREENBLUE

WHITEBLACK

RED

N.C.COM

+12VDCGNDN.O.

EXITDEVICEINPUT

UB-1TF LED

Message lit with button LED green

GREENBLUE

WHITEBLACK

RED

N.C.COM

+12VDCGNDN.O.

EXITDEVICEINPUT

UB-1TF LED

Message lit with button LED green

4.80 in.(122mm)

3.22 in.(82mm)

6.31 in.(160mm)

.75 in.(19mm)

.77 in.(20mm)

4.80 in.(122mm)

3.22 in.(82mm)

6.25 in.(159mm)

.75 in.(19mm)

.77 in.(20mm)

POWER IN12-30 VDC/VAC

ú +

ACOLOR CODE:REDBLACK

GREENBLUEWHITE

+12 VDC-12 VDC

N.O.COMN.C.

INSERT PLUG INTO SWITCH WITHRIBS IN THIS DIRECTION

DETAIL A

POWER IN12-30 VDC/VACú +

NC

COM

NO

MAG LOCK

UB-1L LED PCB

UL Listed

NORMAL POSITION BUTTON ACTIVATED

MAGNETIC LOCKBUTTON LAMP

MESSAGE LAMP

ONGREEN

OFF

OFFREDON

+

+

+

UB-1L LED PCBNYLON WASHER

SELF TAPPING SCREW

12

3 4

SCREWDRIVER

Power In12ú30 VDC/VAC

Safety Tech. Int l Inc.P/N UB-11. Ver 1.0wwyy

DIFFUSER

ALIGN TABSTO NOTCHESON BUTTON

LENS

SWITCH NUT

DIFFUSER

MESSAGE LENS

BUTTON LENS

CONTACT LATCH TIME ADJUSTMENT:CLOCKWISE - LONGCOUNTERCLOCKWISE - SHORTRANGE: ~0.5 ~ 60 sec.

ACTIVATION RANGE ADJUSTMENT:CLOCKWISE - CLOSECOUNTERCLOCKWISE - FARRANGE: ~0.4 ~ 4 INCHES ~1 ~ 10 CM

12-24VDC Power Supply

#6 - 32 x 1 in. OVALHEAD MACHINE SCREW(2) PROVIDED

GREENBLUE

WHITEBLACK

RED

N.C.COM

+12VDCGNDN.O.

EXITDEVICEINPUT

UB-1TF LED

Message lit with button LED red

GREENBLUE

WHITEBLACK

RED

N.C.COM

+12VDCGNDN.O.

EXITDEVICEINPUT

UB-1TF LED

Message lit with button LED red

GREENBLUE

WHITEBLACK

RED

N.C.COM

+12VDCGNDN.O.

EXITDEVICEINPUT

UB-1TF LED

Message lit with button LED green

GREENBLUE

WHITEBLACK

RED

N.C.COM

+12VDCGNDN.O.

EXITDEVICEINPUT

UB-1TF LED

Message lit with button LED green

Wire Color Code with power applied: Red: +12 VDC Black: -12 VDC Green: N.C. Blue: COM White: N.O.

3. ATTACH WIRE PLUG

- 4 -

4.80 in.(122mm)

3.22 in.(82mm)

6.31 in.(160mm)

.75 in.(19mm)

.77 in.(20mm)

4.80 in.(122mm)

3.22 in.(82mm)

6.25 in.(159mm)

.75 in.(19mm)

.77 in.(20mm)

POWER IN12-30 VDC/VAC

ú +

ACOLOR CODE:REDBLACK

GREENBLUEWHITE

+12 VDC-12 VDC

N.O.COMN.C.

INSERT PLUG INTO SWITCH WITHRIBS IN THIS DIRECTION

DETAIL A

POWER IN12-30 VDC/VACú +

NC

COM

NO

MAG LOCK

UB-1L LED PCB

UL Listed

NORMAL POSITION BUTTON ACTIVATED

MAGNETIC LOCKBUTTON LAMP

MESSAGE LAMP

ONGREEN

OFF

OFFREDON

+

+

+

UB-1L LED PCBNYLON WASHER

SELF TAPPING SCREW

12

3 4

SCREWDRIVER

Power In12ú30 VDC/VAC

Safety Tech. Int l Inc.P/N UB-11. Ver 1.0wwyy

DIFFUSER

ALIGN TABSTO NOTCHESON BUTTON

LENS

SWITCH NUT

DIFFUSER

MESSAGE LENS

BUTTON LENS

CONTACT LATCH TIME ADJUSTMENT:CLOCKWISE - LONGCOUNTERCLOCKWISE - SHORTRANGE: ~0.5 ~ 60 sec.

ACTIVATION RANGE ADJUSTMENT:CLOCKWISE - CLOSECOUNTERCLOCKWISE - FARRANGE: ~0.4 ~ 4 INCHES ~1 ~ 10 CM

12-24VDC Power Supply

#6 - 32 x 1 in. OVALHEAD MACHINE SCREW(2) PROVIDED

GREENBLUE

WHITEBLACK

RED

N.C.COM

+12VDCGNDN.O.

EXITDEVICEINPUT

UB-1TF LED

Message lit with button LED red

GREENBLUE

WHITEBLACK

RED

N.C.COM

+12VDCGNDN.O.

EXITDEVICEINPUT

UB-1TF LED

Message lit with button LED red

GREENBLUE

WHITEBLACK

RED

N.C.COM

+12VDCGNDN.O.

EXITDEVICEINPUT

UB-1TF LED

Message lit with button LED green

GREENBLUE

WHITEBLACK

RED

N.C.COM

+12VDCGNDN.O.

EXITDEVICEINPUT

UB-1TF LED

Message lit with button LED green

GREENBLUE

WHITEBLACK

RED

N.C.COM

+12VDCGNDN.O.

EXITDEVICEINPUT

UB-1TF LED

Message lit with button LED red

GREENBLUE

WHITEBLACK

RED

N.C.COM

+12VDCGNDN.O.

EXITDEVICEINPUT

UB-1TF LED

Message lit with button LED red

GREENBLUE

WHITEBLACK

RED

N.C.COM

+12VDCGNDN.O.

EXITDEVICEINPUT

UB-1TF LED

Message lit with button LED green

GREENBLUE

WHITEBLACK

RED

N.C.COM

+12VDCGNDN.O.

EXITDEVICEINPUT

UB-1TF LED

Message lit with button LED green

4. ATTACH POWER FOR MESSAGE LED (if desired)

WIRING DIAGRAMS (Color codes are shown with power applied and button LED red during wiring)A. Normally Open Exit Device

B. Normally Closed Exit Device

UB-1TF Wire Color Code

CONNECTOR POWER OFF POWER ON POWER ON WIRE COLOR (SUPERVISORY) UNTRIGGERED TRIGGERED

RED +12V +12V +12V BLACK -12V -12V -12V GREEN N.O. N.C. N.O. BLUE COM COM COM WHITE N.C. N.O. N.C.

LED color None Red Green

- 5 -

5. MOUNT BUTTON ONTO ELECTRICAL BOX

- 6 -4.80 in.

(122mm)

3.22 in.(82mm)

6.31 in.(160mm)

.75 in.(19mm)

.77 in.(20mm)

4.80 in.(122mm)

3.22 in.(82mm)

6.25 in.(159mm)

.75 in.(19mm)

.77 in.(20mm)

POWER IN12-30 VDC/VAC

ú +

ACOLOR CODE:REDBLACK

GREENBLUEWHITE

+12 VDC-12 VDC

N.O.COMN.C.

INSERT PLUG INTO SWITCH WITHRIBS IN THIS DIRECTION

DETAIL A

POWER IN12-30 VDC/VACú +

NC

COM

NO

MAG LOCK

UB-1L LED PCB

UL Listed

NORMAL POSITION BUTTON ACTIVATED

MAGNETIC LOCKBUTTON LAMP

MESSAGE LAMP

ONGREEN

OFF

OFFREDON

+

+

+

UB-1L LED PCBNYLON WASHER

SELF TAPPING SCREW

12

3 4

SCREWDRIVER

Power In12ú30 VDC/VAC

Safety Tech. Int l Inc.P/N UB-11. Ver 1.0wwyy

DIFFUSER

ALIGN TABSTO NOTCHESON BUTTON

LENS

SWITCH NUT

DIFFUSER

MESSAGE LENS

BUTTON LENS

CONTACT LATCH TIME ADJUSTMENT:CLOCKWISE - LONGCOUNTERCLOCKWISE - SHORTRANGE: ~0.5 ~ 60 sec.

ACTIVATION RANGE ADJUSTMENT:CLOCKWISE - CLOSECOUNTERCLOCKWISE - FARRANGE: ~0.4 ~ 4 INCHES ~1 ~ 10 CM

12-24VDC Power Supply

#6 - 32 x 1 in. OVALHEAD MACHINE SCREW(2) PROVIDED

GREENBLUE

WHITEBLACK

RED

N.C.COM

+12VDCGNDN.O.

EXITDEVICEINPUT

UB-1TF LED

Message lit with button LED red

GREENBLUE

WHITEBLACK

RED

N.C.COM

+12VDCGNDN.O.

EXITDEVICEINPUT

UB-1TF LED

Message lit with button LED red

GREENBLUE

WHITEBLACK

RED

N.C.COM

+12VDCGNDN.O.

EXITDEVICEINPUT

UB-1TF LED

Message lit with button LED green

GREENBLUE

WHITEBLACK

RED

N.C.COM

+12VDCGNDN.O.

EXITDEVICEINPUT

UB-1TF LED

Message lit with button LED green

6. CUSTOM LABELS

To create your own custom label, size to fit in .48h x 2.23w as shown below.Also available online at: www.sti-usa.com/ublabel

2.23 in.

.48 in.

WARRANTYACCESSORIES

DESCRIPTION PART #

COLOR MATCH BACK BOX KIT KIT-71100A-* * (R=red, B=blue, G=green, W=white or Y=yellow)

CUSTOM LABEL APPLIED TO UB-1CL-* BLANK MESSAGE PLATES * (B=blue, G=green, W=white or Y=yellow) CONTACT ASSEMBLY FOR UB-1 KIT-UB-1C 24 VOLT LED WHITE (Standard) KIT-E10147 RED KIT-E10145 BLUE KIT-E10141 GREEN KIT-E10143

12 VOLT LED RED KIT-E10144 BLUE KIT-E10140 GREEN KIT-E10142

COVERS BOPPER STOPPER STI-6518 UNIVERSAL STOPPER STI-13000 Series STOPPER II® STI-1100 Series

– See website for complete cover details –

- 7 -

Printed in USA Inst. Sht. UB-1TF Button MARCH2010

2306 Airport Rd • Waterford, MI 48327, USAPhone: 248-673-9898 • Fax: 248-673-1246

info@sti-usa.com • www.sti-usa.com

Taylor House • 34 Sherwood Road • Bromsgrove, Worcestershire • B60 3DR • England Tel: +44 (0)1527 520 999 • Fax: +44 (0)1527 501 999 • info@sti-emea.com • www.sti-emea.com

WARRANTYThree year guarantee against breakage of polycarbonate in normal use (one year on electro mechanical and electronic components). Electronic warranty form a www.sti-usa.com/wc14.

WARNING: This product can expose you to chemicals including Dichloromethane, which is known to the State of California to cause cancer, and Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.