Tyre Changer / Wheel Balancer - gmxprime Maintenance.pdf · 03 04 Tyre Changer Tyre Changer...
Transcript of Tyre Changer / Wheel Balancer - gmxprime Maintenance.pdf · 03 04 Tyre Changer Tyre Changer...
GMX International Co.,LTD is engaged in producing and distributing of automobile maintenance equipments, including tyre changer, wheel balancer, two post lift, four post lift, scissor lift iand etc.
We have already obtained CE and ISO9001:2000 quality certifica-tion. Our products have powerful quality security guarantees, enjoying popular sales in both domestic and overseas markets such as regions in Europe, Oceania, the Middle East, Africa, South America and North America, especially, the tyre changer, wheel balancer and four-post lift have been praised highly by the experts and customers all around the world, and are being ordered by our customers at steady qty. We will keep on developing higher technology to continuously supply the first-class automobile maintenance products.
Our company would like to keep further communication and cooper-ation with all our customers in order to meet the higher demand and to provide better service to our customers. We feel confident that we are moving forward to achieve the world leading position!
Company Introduction:
01 02
Tyre Changer / Wheel Balancer
TYRE CHANGER
WHEEL BALANCER
TWO POST LIFT
FOUR POST LIFT
SCISSORS LIFT
................................................................................................. 03~18
................................................................................................. 19~34
................................................................................................. 35~58
................................................................................................. 59~70
................................................................................................. 71~76
Two/Four Post Lift
03 04
Tyre Changer Tyre Changer
Mounting tyre without lever to protect the rim from damage; Dual pressing direction bead breaker not break the tyre.
With wheel lock nut to lock the wheel fast.
Air relief valve, bead blast control valve and pressure regulator can adjust air pressure inside of the tank. The pressure inside should be adjusted to 0.6~0.7Mpa.
Dual safety device make stong force of the bead blaster more safety.
Three-point bead pressing system makes easily mount/demount the tyre, especially for hard tyre.
Imported electronic components.
2-Speed motor to speed up when mount/demount the tyre.
Pneumatic bead presser.
Aluminum and stainless air valve body.
Camera and LCD device could visually monitor the lower bead breaker position.
Tool head rotation system: can adjust the tool head direction fast and mount/demount the tyre efficiently.
Tool head moving back and forth control system: suitable for wheel size from 10” to 30”
Vertical shaft control system: moving back and forth and suitable for size from 10” to 30”
The lower bead breaker disk control system: work with the upper disk to demount the lower bead.
The upper bead breaker disk control system: work with the lower disk when breaking the bead to protect rim from damage.
Imported Hydraulic Control System.
380V
10~30”
1250mm
3-15”
● Movable vertical shaft fix for different size wheels to correct position easily and quickly and also not damage the tyre bead.● The max. wheel size for this model could up to 30” and also suitable for car, van. The standard accessory includes the inflation device and bead blaster.● Its reasonable design, high quality and convenient operation are praised by customers.
Motor Power 0.9/1.1kwOil Pressure 16MpaMotor Rotational Speed 1400/2800r/minWorking Oil Pressure 8-12MpaWorking Air Supply 8-10 BarTurntable Rotational Speed 6.8/13.6rpmBead Breaker Force 1400kgSw ing Arm Rotation Radius 600mmWeight 620kgShaft Longitudinal Shift 285mmDimensions(WxDxH ) 1700x1300x1750mm
05 06
Tyre Changer Tyre Changer
380V
9~28”
1100mm
4-14”
● Automatic leverless tool head--automatically demount the tyre without lever.● Angle changed bead breaker disk--automatically change disk angle to insert the bead for breaking the bead easlly.● Wheel lock device--position the rim in the center fast and exactly.● Dual disk flexible axle pneumatic control device--control upper and lower bead breaker disk move synchronously.
● Automatic leverless tool head with the advantage of tilt-back and swing-arm tyre changer.● Optional 2-speed motor(7rpm/14rpm)to make operation efficient.● Pneumatic locking assist arm presser makes more powerful for pressing the tyre.● Movable foot pedal assembly is more convenient for service.● With special design of bead breaker device protect rim from damage.● Upright inflation device display the value for reference when inflating.● Weight tray with inflation device for displaced balancing weight.● Pneumatic assist arm make low-profile and large size tyre mount/demount easily.● Equipped with full-flow inflation system.
220/380V
9~26”
1050mm
4-15”
Motor Power 0.9/1.1kwMotor Rotational Speed 1400/2800r/minAir Supply 07-08MpaTurntable Rotational speed 6.8/13.6rpmG.W / N.W 560/505kgPackage 1500x1300x1850mmDimensions(WxDxH ) 1500x1200x1740mm
Motor Power 380V 0.7/0.9kw220V/1.1kw
Turntable Rotational speed 6.8/13.6rpm
Air Supply 0.7-0.8Mpa
G.W/N.W 400kg/352kg
Package 1150x1000x1900mm
07 08
Tyre Changer Tyre Changer
220/380V
11~26”
1050mm
4-15”
● Automatic leverless tool head● The adjustable jaw clamp has obtained national technical monopoly.● With dual mechanical assist arms.● Optional 2-speed motor (7rpm/14rpm)to make operation efficient.● Bead blaster device for easier inflation, fixed or not on the machine and suitable for various tyres.
● Automatic leverless tool head.● Pneumatic locking assist arm presser makes more powerful for pressing the tyre.● Movable foot pedal assembly is more convenient for service.● High-quality PCL inflation gauge display value more accurate.● Stainless air valve stand wear and tear.● Pneumatic assist arm make low-profile and large size tyre mount/demount easily.
220/380V
9~24”
1050mm
4-15”
Motor Power 1.1/0.75kw
Turntable Rotational speed 6.8rpm
Air Supply 0.7-0.8Mpa
G.W/N.W 453kg/372kg
Package 1300x1200x1950mm
Motor Power 1.1/0.75kw
Turntable Rotational speed 6.8rpm
Air Supply 0.7-0.8Mpa
G.W/N.W 432kg/350kg
Package 1150x1000x1780mm
09 10
Tyre Changer Tyre Changer
220/380V
11~26”
1050mm
4-15”
● The adjustable jaw clamp has obtained national technical monopoly.● With dual mechanical assist arms.● Optional 2-speed motor (7rpm/14rpm)to make operation efficient.● Bead blaster device for easier inflation fixed or not on the machine and suitable for various tyres.
● Automatic position presser helps duck head demount the bead.● Assist arm center pressing cone shaft help clamp the rim smoothly.● Pressing arm available for 360°rotate and easy for mounting the tyre.● Wheel lifting plate help lift the tyre.● Four-in-one assist arm and quick change adapter both get national patent.● Bead breaking blade design according to the bead structure.● FOUR-IN-ONE TYRE CHANGER.● Top assist arm is flexible,quickly to operate and also saving space.● Easy for install and for upgrading.● With all the functions of dual assist arms.● Suitable for ordinary and low-profile tyres.
220/380V
11~26”
980mm
4-15”
Motor Power 380V0.7/0.9kw220V1.1kw
Turntable Rotational speed 6.8/13.6rpm
Air Supply 0.7-0.8Mpa
G.W/N.W 453kg/372kg
Package 1300x1100x1800mm
Motor Power 1.1/0.9kw
Turntable Rotational speed 6.8/13.6rpm
Air Supply 0.7-0.8Mpa
G.W/N.W 350kg/295kg
Package 1300x1100x1050mm
11 12
Tyre Changer Tyre Changer
220/380V
9~24”
1050mm
4-15”
● Tilt-back low profile tyre changer.● With tilting back column and horizontal arm pneumatic locking.● Suitable for low profile tyre and not damage the rim and tyre.● Bead breaking blade design according to the bead structure.● Aluminum alloy air valve and stainless air valve shaft.● With automatic assist arm for standard specification.
220/380V
11~22”
1050mm
4-15”
● Tilt-back low profile tyre changer.● With automatic assist arm for standard specification.● With tilting back column and horizontal arm pneumatic locking.● Suitable for low profile tyre and not damage the rim and tyre.● Bead breaking blade design according to the bead structure.● Aluminum alloy air valve and stainless air valve shaft.
Motor Power 1.1/0.75kw
Turntable Rotational Speed 6.8rpm
Air Supply 0.7-0.8Mpa
G.W/N.W 420kg/340kg
Package 1150x1000x1700mm
Motor Power 1.1/0.75kw
Turntable Rotational speed 6.8rpm
Air Supply 0.7-0.8Mpa
G.W/N.W 410kg/330kg
Package 1150x1000x1700mm
13 14
Tyre Changer Tyre Changer
220/380V
9~24”
1050mm
4-15”
● Tilt-back low profile tyre changer.● With tilting back column and horizontal arm pneumatic locking.● Suitable for low profile tyre and not damage the rim and tyre.● Aluminum alloy air valve and stainless air valve shaft.
220/380V
11~22”
1050mm
4-15”
● Tilt-back low profile tyre changer.● With tilting back column and horizontal arm pneumatic locking.● Suitable for low profile tyre and not damage the rim and tyre.● Bead breaking blade design according to the bead structure.● Aluminum alloy air valve and stainless air valve shaft.
Motor Power 1.1/0.75kw
Turntable Rotational speed 6.8rpm
Air Supply 0.7-0.8Mpa
G.W/N.W 350kg/270kg
Package 1150x1000x950mm
Motor Power 1.1/0.75kw
Turntable Rotational speed 6.8rpm
Air Supply 0.7-0.8Mpa
G.W/N.W 350kg/270kg
Package 1150x1000x1800mm
15 16
Tyre Changer Tyre Changer
220/380V
11~22”
980mm
4-15”
● With automatic swing assist arm for low-profile tyres.● Duck head can be adjusted to fit for 11"to 22" tyres.● Reasonable duck head position.● Bead breaking blade design according to the bead structure.● Assist arm center pressing cone shaft help clamp the rim smoothly.● Wheel lifting plate on the assist arm operate fast and easily.
220/380V
11~22”
980mm
4-15”
Station1: Wheel lifting performance
Station 2: Center pressing cone shaft help clamp the rim smoothly
Station 3: Pressing arm rotate following the tyre
Station 4: Automatic position presser helps duck head demount the bead
Motor Power 1.1/0.75kw
Turntable Rotational speed 6.8rpm
Air Supply 0.7-0.8Mpa
G.W/N.W 390kg/280kg
Package 1150x1000x1700mm
Motor Power 1.1/0.75kw
Turntable Rotational speed 6.8rpm
Air Supply 0.7-0.8Mpa
G.W/N.W 280kg/210kg
Package 1150x1000x960mm
17 18
Tyre Changer Tyre Changer
220/380V
11~22”
980mm
4-15”
● Bead pressing device and pressing shaft for mount/demount hard tyre.● Change slide block position for square turntable plate to adjust the clamping size.● Change wheel size suitable for 11" to 22" by adjusting duck head angle.● Bead breaking blade design according to the bead structure.
Clamp support won’t be deformed for its good precess and structure design; Alloy steel jaw clamp and spring plat between them to prevent turntable worn our and dust into it.
With Plastic protect kits to protect the rim not to damage.
220/380V
9~20”
980mm
3-10”
● Suitable for car and motorcycle tyres and external clamping size up to 20" without other assist parts.● Position changeable duck head(pat-ent).● Movable jaw clamps(patent)enlarge external clamping rim size.● Bead break blade suitable for car and motorcycle.● Adding motorcycle duck head as standard accessory.● For motorcycle without disassembled the axle and braking device.
For Motorcycle Tyre
For Car Tyre
Motor Pow er 1.1/0.75kw
Turntable Rotational speed 6.8rpm
Air Supply 0.7-0.8Mpa
G.W/N.W 280kg/210kg
Package 1150x1000x960mm
Motor Pow er 1.1/0.75kw
Turntable Rotational speed 6.8rpm
Air Supply 0.6-0.8Mpa
G.W/N.W 248kg/200kg
Package 980x880x960mm
Rim Diameter External 8-22"
Rim Width 3-12"
Air Supply 0.7-0.8MPa
18 20
Wheel Balancer Wheel Balancer
220V
12~24”
800mm
1.5-12”
● Italian intellectual property.● 3D program: automatically data input for value A, D and L.● Static and dynamic balancing program.● Multi ALU balancing mode.● OPT program: optimize the matching of tyre and rim.● SPO program: to divide the balance weight and hide behind the spokes in a non-visible position.
GM820
● With foot pedal to brake when weight application.● Store data for different wheel size.● Software upgraded by USB port.● Multi-language for chinese,En-glish,Germany and ltalian,etc.● Unit of weight: gram/ounce;Unit of measure:mm/inch.● 19"LCD display screen.
Weight Cutting System Waste Weight Recovery System
Lighting System for Weight Stick
OPT program SPO program
Program Interface
New visual graphical interface
Multi-language for Chinese, English,
Germany and Italian, etc.
Internal gauge calibration
External gauge calibration
Unit Converted for weight and measurement
Visual computer animation displaying
Automatically data input for value A and
D with internal gauge
Weight calibration procedure
Multi modes of balancing suitable
for different rim structures
Computer display the exact weight
position
Static balancing program
Brake the pedal to help sticking weight
With internal gauge for sticking the weight
Automatically data input with external gauge make
effective
Motor Pow er 0.25kw
Rim Center Hole Dia ≤145mm
Measuring Time 7s
Balancing Speed 180rpm
Balancing Accuracy ±1g
PC Computer Board 6layers
CPU 32bit
OS linux
N.W/G.W 120/150kg
Package 1150x800x1100mm
21 22
Wheel Balancer Wheel Balancer
● Italian intellectual property.● 3D program: automatically data input for value A, D and L.● Static and dynamic balancing program.● Multi ALU balancing mode.● SPO program: to divide the balance weight and hide behind the spokes in a non-visible position.● OPT program: to optimize the matching of tyre and rim.● With foot pedal to brake when weight application.● Store data for different wheel size.● Software upgraded by USB port.● Multi-language for chinese, English, Germany and ltalian,etc.● Unit of weight:gram/ounce; Unit of measure:mm/inch.● 3 kinds of cone size from 40mm to 145mm.● 19"LCD display screen.
GM966
OPT program
SPO program
220V
12~24”
800mm
1.5-12”
Program Interface
New visual graphical interface
Multi-language for Chinese, English,
Germany and Italian, etc.
Internal gauge calibration
External gauge calibration
Multi modes of balancing suitable for different rim structures
Unit converted for weight and
measurement
Visual computer animation displaying
Computer display the exact weight position
Static balancing program
Automatically data input for value A and D with
internal gauge
Technical Data
Motor Pow er 0.25kw
Rim Center Hole Dia ≤145mm
Measuring Time 7s
Balancing Speed 180rpm
Balancing Accuracy ±1g
PC Computer Board 6layers
CPU 32bit
OS Linux
Package 1150x800x1100mm
N.W/G.W 120/150kg
23 24
Wheel Balancer Wheel Balancer
220/V
12~24”
800mm
1.5-12”
● Italian intellectual property.● Automatically data input for value A, D and L with internal and external gauge.● Multi modes of balancing program for different rim structures.● SPO program: to divide the balance weight and hide behind the spokes in a non-visible position.● OPT program: optimize the matching of tyre and rim.● With foot pedal to brake when weight application.● Store data for different wheel size.● Software upgraded by USB port.● Multi-language for Chinese, English, Germany and ltalian,etc.● Unit of weight:gram/ounce; Unit of measure:mm/inch.● With cone size from 40mm to 145mm.● 19"LCD display touch screen.● Adopt 6 layers of computer board, 32 bit CPU and with linux system.● Pneumatic locking shaft.● Adopt magnetic braking system and hear beep for weight application.● On touch screen to operate.
GM977
220V
12~24”
800mm
1.5-12”
● Self-developed intellectual property.● 3D program: automatically data input for value A, D and L.● Static and dynamic balancing program.● Multi balancing modes.● SPO program: to divide the balance weight and hide behind the spokes in a non-visible position.● OPT program: optimize the matching of tyre and rim.● With foot pedal to brake when weight application.● Unit of weight:gram/ounce; Unit of measure: mm/inch.● 3 kinds of cone size from 40mm to 145mm.
OPT program: to optimize the matching of tyre and rim
SPO program: to divide the balance weight and hide behind the spokes in a non-visible position
LED screen indicate the position for inside weight sticking
Technical Data
Motor Pow er 0.25kw
Rim Center Hole Dia ≤145mm
Measuring Time 7s
Balancing Speed 180rpm
Balancing Accuracy ±1g
PC Computer Board 6layers
CPU 32bit
OS Linux
Package 1150x800x1100mm
N.W/G.W 120/150kg
Motor Pow er 0.25kw
Rim Center Hole Dia ≤145mm
Measuring Time 7s
Balancing Speed 180rpm
Balancing Accuracy ±1g
Package 820x820x1100mm
N.W/G.W 120kg/150kg
CPU 32bit
GM986
25 26
Wheel Balancer Wheel Balancer
220V
12 / 24”
800mm
1.5-12”
● Self-research intellectual property.● 2D program: automatically data input for value A and D.● 3D program: automatically data input for value A, D and L.● Static and dynamic balancing program.● Multi ALU balancing mode.● SPO program: to divide the balance weight and hide behind the spokes in a non-visible position.● OPT program: optimize the matching of tyre and rim.● The shaft stopped when machine diagram the unbalance weight.● Unit of weight:gram/ounce; Unit of measure: mm/inch.● 4 kinds of cone size from 40mm to 145mm.● Automatically data input with internal gauge to stick on the weight inside of rim.● Lengthening shaft suitable for over wide rim.
GM718
● Self-research intellectual property.● 2D program: automatically data input for value A and D.● 3D program: automatically data input for value A, D and L.● Static and dynamic balancing program.● Multi ALU balancing mode.● SPO program: to divide the balance weight and hide behind the spokes in a non-visible position.● OPT program: optimize the matching of tyre and rim.● The shaft stopped when machine diagram the unbalance weight.● Unit of weight: gram/ounce; Unit of measure:mm/inch.● 4 kinds of cone size from 40mm to 145mm.● Automatically data input with internal gauge to stick on the weight inside of rim.● Lengthening shaft suitable for over wide rim.● With pneumatic locking shaft,wheel hood and external gauge for standard.
GM722
Motor Pow er 0.25kwRim Center Hole Dia ≤135mm
Measuring Time 7s
Balancing Speed 180rpm
Balancing Accuracy ±1g
Package 820x820x1160mm
N.W/G.W 118/146kg
CPU 32bit
Air supply 0.6-0.8Mpa
Motor Pow er 0.25kw
Rim Center Hole Dia ≤135mm
Measuring Time 7s
Balancing Speed 180rpm
Balancing Accuracy ±1g
Package 820x820x1160mm
N.W/G.W 118/146kg
CPU 32bit
Air supply 0.6-0.8Mpa
220V
12 / 24”
800mm
1.5-12”
27 28
Wheel Balancer Wheel Balancer
220V
12 / 24”
650mm
1.5-12”
GM702
● Heat treatment balancing shaft improve the hardness, abrasion resistance and using time.● Multi balancing mode fix for different rim stucture.● 3 kinds of positioning ways for selection.● With self-calibration program for trouble diagram.● Measurement unit (gram/ounce, mm/inch).● Consistently balancing the tyre and suitable of rim manufacture.
GM702
GM70
● Heat treatment balancing shaft improve the hardness, abrasion resistance and using time.● Multi balancing mode fix for different rim stucture.● 3 kinds of positioning ways for selection.● With self-calibration program for trouble diagram.● Measurement unit (gram/ounce,mm/inch).● Consistently balancing the tyre and suitable of rim manufacture.
220V
12 / 24”
650mm
1.5-12”
GM70
Motor Pow er 0.25kw
Rim Center Hole Dia ≤145mm
Measuring Time 7s
Balancing Speed 180rpm
Balancing Accuracy ±1g
Package 820x820x1160mm
N.W/G.W 118/146kg
Motor Pow er 0.25kw
Rim Center Hole Dia ≤145mm
Measuring Time 7s
Balancing Speed 180rpm
Balancing Accuracy ±1g
Package 820x820x1160mm
N.W/G.W 118/146kg
29 30
Wheel Balancer Wheel Balancer
● Available for different tyre size by shifting “Model”key to select.● With pneumatic lifting trolley.● With automatic pneumatic braking system.● Enhanced main shaft for long time using.● Dual cup and adjusted air/oil regulator.● With folded wheel protect hood.
GM1288Balancing mode for car: can balance tyre from 12” to 16”
Car and Truck Wheel Balancer
GM1200
Truck Wheel Balancer
● Available for different tyre size by shifting “Model”key to select.● With pneumatic lifting trolley.● With automatic pneumatic braking system.● Enhanced main shaft for long time using.● Dual cup and adjusted air/oil regulator.
Could lubricate components through the air line so that make to use long time; The air pressure be adjusted from 0.3Mpa to 0.6Mpa by regulate the knob.
Centre Core PositioningSuitable for high precision rim of center core and precision between bolts and center core CH: 200-228mm; 270-290mm
Bolts Positioning Way (Optional)
Motor Pow er 220V/380V-750W
Air supply 0.3-0.6Mpa
Rim Width 3/20"
Rin Diameter 12/24"
Rim Center Hole Dia Ø50mm-Ø215mm
Rim Center Hole Dia Ø275mm-Ø285mm
Max.Wheel Diameter 1200mm
Measuring Time Car7sTruck10s
Balancing Speed 210rpm
Balancing Accurack Car±1gTruck±25g
Package 1650x880x1260mm
N.W/G.W 300/370kg
Motor Pow er 220V/380V-750W
Air supply 0.3-0.6Mpa
Rim Width 3/20"
Rin Diameter 12/24"
Rim Center Hole Dia Ø145mm-Ø220mm
Rim Center Hole Dia Ø275mm-Ø285mm
Max.Wheel Diameter 1200mm
Measuring Time 10s
Balancing Speed 210rpm
Balancing Accurack ±25g
Package 1650x880x1260mm
N.W/G.W 300/370kg
31 32
Tyre Changer Tyre Changer
Energy Saving Up to 45%Energy Saving Principle for
Tyre Changers
Protective Kits for Tyre ChangersIt will damage the rim, especially for alloy rim if operation is not correct when mount and demount the tyre. For this, we have developed some plastic kits for duck head, jaw clamps and bead breakers to protect the rim safety.
● New Type Duck Head ● Bead Break Cover(Exclude model GM-650)
● Jaw Clamp Cover(Different for models)
Plastic Cover for Standard Jaw Clamps
Plastic Cover for Adjust Jaw Clamps
With plastic duck insert
The new tpre duck head is various angles and stainless duck head which developed by thousands of test. It will mount/ demount the tyre smoothly and will not damage the tyre and rim also for rust.
Jaw Clamp Cylinder
The big size aluminum cylinder liner and aluminum cylinder piston make jaw clamps more powerful.
33 34
Wheel Balancer Wheel Balancer
Core components are imported and with high quality, which made test and more durable.
High-precision shaftThe shaft bearing was imported and made heat treatment. The grinding shaft assembly surface could ensure the accuracy of secondary disassembly. (The rim is in the condition of accuracy)
The tolerance is 5° more or less for chasing weight.
With self-calibration function With multi balancing choice for different wheel structures
Three kinds of positioning ways for selection
With Flange Mounting Internal Mounting External Mounting
Centre Core PositioningHigh-precision cone quick locking and positioning the wheel
Balancer blind adapter Suitable for Citroen and Elysee tyres without center hole
35 36
Two Post Lift
GM-6134 3.5T Two Post Lift GM-6144 4.0T Two Post Lift
◆ Features:● Hidden power cord and hydraulic hose, good surface looking.● Driven by dual hydraulic cylinders, make it ascents and descents smoothly.● Electric-controlled automatic 4-locking protective system.● Chain-style elevating system.● Balanced by steel wire rope.● Tri-sector type、asymmetrical arm can be widely used for raising many kinds of cars.● 360° arm with Side-locking for more security and reliability.● The lowest lift height is only 100mm, facilitate raising the top-grade cars.● Controlled by computer IC Board without misoperation.● Overbeam protective mechanism for preventing vehicle being damaged due to over-lifting, it will prolong the working life of hydraulic unit and cylinders.
Two Post Lift
ProductType
LiftWeight
LowestHeight
LiftHeight
TotalHeight
TotalWidth
LaneWidth
N.W
GM-6134 3500kg100mm(3.94")
1920mm(75.59")
2844mm(111.97")
3419mm(134.61")
2500mm(98.43") 650kg
GM-6144 4000kg100mm(3.94")
1920mm(75.59")
2844mm(111.97")
3419mm(134.61")
2500mm(98.43") 670kg
2805(110.43”)
min
227(
8.94
”)
min
133(
5.24
”)
min
100(
3.94
”)
1920
(75.
59”)
1953
(76.
89”)
2047
(80.
59”)
3419(134.61”)
2844
(111
.97”
)
R1300(51.18”)
R590(23.23”)
R800(31.50”)R1080(42.52”)
1867
(73.
50”)
R858(33.78”)
37 38
Two Post Lift Two Post Lift
GM-6249 4T Two Post Lift (Gantry)
◆ Features:● Gantry design, without influencing the floor space. ● Hidden power cord and hydraulic hose, good surface looking.● Driven by dual hydraulic cylinders, make it ascents and descents smoothly.● Tri-sector type、asymmetrical arm can be widely used for raising many kinds of cars.● Adjustable total height, applicability is wider.● Controlled by computer IC Board, without misoperation.
ProductType
LiftWeight
LowestHeight
LiftHeight
TotalHeight
TotalWidth
LaneWidth
N.W
GM-6249 4000kg105mm(4.13")
1900mm(74.80")
3915mm(154.13")
3515mm(138.39")
2795mm(110.04")
2480mm(97.64“)
3515(138.39”)
Min
105-
-Max
1990
(4.1
3”)-
-(74
.80”
)
3915
/362
5(1
54.1
3”)-
-(14
2.71
”)
2795(110.04”)
R1035(40.75”)
R590(23.23”)
R855(33.66”)
R1295(50.99”)
39 40
◆ Features:● "H" Bases late, reduce the requirement for the foundation.● Hidden power cord and hydraulic hose, good surface looking.● Driven by dual hydraulic cylinders, make it ascents and descents smoothly.● Tri-sector type, asymmetrical arm can be widely used for raising many kinds of cars.● Chain-style elevating system.● Controlled by computer IC Board, without misoperation.
Two Post Lift Two Post Lift
GM-6345 4T Two Post Lift
ProductType
LiftWeight
LowestHeight
LiftHeight
TotalHeight
TotalWidth
LaneWidth
N.W
GM-6345 4000Kg100mm(3.94")
1920mm(75.59")
2884mm(113.54")
3569mm(140.51")
2490mm(98.03") 950Kg
2000
(78.
74”)
100-
150
(3.9
4”)
(5.9
1”)
2884
(113
.54”
)
1920
-197
0(7
5.60
”)
(77.
56”)
2801(110.27”)
3569(104.51“)2490(98.03”)
R655
(25.
79”)
R1075
(42.3
2”)
R895(35.24”)
R1335(52.56”)
15.7
5
1400
(55.
12”)
41 42
◆ Features:● Gantry design, without influencing the floor space.● Driven by dual hydraulic cylinders, it ascents and descents smoothly.● Electric-controlled automatic 2-locking protective system.● Raising driven directly by hydraulic cylinder.● Balanced by steel wire rope.● Tri-sector type、asymmetrical arm can be widely used for raising many kinds of cars.● Adjustable total height, applicability is wider.● Controlled by computer IC Board, without misoperation.● Overbeam protective mechanism for preventing vehicle being damaged due to over-lifting, it will prolong the working life of hydraulic unit and cylinders.
Two Post Lift Two Post Lift
GM-6035 3.8T Two Post Lift(Gantry)
ProductType
LiftWeight
LowestHeight
LiftHeight
TotalHeight
TotalWidth
LaneWidth
N.W
GM-6035 3800Kg135mm(5.31")
1935mm(76.18")
3750(3500)mm(147.64")(137.80")
3440mm(135.43")
2490mm(98.03") 735Kg
3750
(147
.64”
)35
00(1
37.8
0”) 2862(112.68”)
2045
(80.
51”)
1935
(76.
18”)
2490(98.03”)3440(135.43”)
R792(31.18”)
R1070
(42.13
”)R576(22.68”)
R922(36.30”)
R1397(55.00”)
43 44
◆ Features:● Gantry design, without influencing the floor space. Balanced by steel wire rope.● Driven by dual hydraulic cylinders, it ascents and descents smoothly. Power unit can be installed on any side of lift.● Double-insured self-locking protective device, released by single-release safety.● Wide space between columns Multi-voltage power supply is available for convenient use.(220V or 380V).
Two Post Lift Two Post Lift
GM-6445 4.5T Two Post Lift(Gantry)
ProductType
LiftWeight
LowestHeight
LiftHeight
TotalHeight
TotalWidth
LaneWidth
N.W
GM-6445 4500Kg115mm(4.53")
1800mm(70.87")
3752mm(147.72")
3690mm(145.28")
2485mm(97.83") 900Kg
3690(145.28”)
3752(
147.
72”)
1800
(70.
87”)
2706(106.54”)
115
(4.5
3”)
R735(28.84”)R1045(41.14”)
R992
(39.06”)
R147
0(57
.87”
)
45 46
◆ Features:● Common design.● Driven by dual hydraulic cylinders, make it ascent and descent smoothly.● Self-locking protective device with double safety.● Chain-style elevating system.● Balanced by steel wire rope.● Asymmetrical design make it possible to open vehicle doors within narrow width between columns.
Two Post Lift Two Post Lift
GM-6934 3.8T Two Post Lift
ProductType
LiftWeight
LiftHeight
RiseTime
TotalHeight
TotalWidth
WidthBetween
Pillars
LaneWidth
LowestHeight
PowerSupply
GM-6934 3800kg1800mm(70.87") 50/s
2844mm(111.97")
3419mm(134.61")
2799mm(110.20")
2380mm(93.70")
117mm(4.61") 220/380V
3419(134.61”)
2844
(111
.97”
)
Max
1927
(75.
87”)
Max
1833
(72.
17”)
Max
1800
(70.
87”)
Min
244(
9.61
”)M
in15
0(5.
91”)
Min
117(
4.61
”)
2799(110.20”)
R738
(29.06”)
R1041
(40.98”)
2380(93.70”)420(16.54”)
R1452
(57.17”)R942(37.09”)
47 48
◆ Features:● Gantry design.● Driven by dual hydraulic cylinders, make it ascent and descent smoothly.● Self-locking protective device with double safety.● Chain-style elevating system.● Balanced by steel wire rope.● Asymmetrical design make it possible to open vehicle doors within narrow width between columns.
Two Post Lift Two Post Lift
GM-6834 3.8T Two Post Lift
ProductType
LiftWeight
LiftHeight
RiseTime
TotalHeight
TotalWidth
WidthBetween
Pillars
LaneWidth
LowestHeight
PowerSupply
GM-6834 3800kg1800mm(70.87") 50/s
3620mm(142.52")
3419mm(134.61")
2799mm(110.20")
2380mm(93.70")
117mm(4.61") 220/380V
3419(134.61”)
Min
244(
9.61
”)M
in15
0(5.
91”)
Min
117(
4.61
”)
2824
(111
.18”
)
Max
1927
(75.
87”)
Max
1833
(72.
17”)
Max
1800
(70.
87”)36
20(1
42.5
2”)
2799(110.20”)
R1452
(57.17”)R942 (37.09”)
2380(93.70”)
R738(29.06”)
R1041(40.98”)
Max
1980
(77.
95”)
M in101(13.98”)
3050(120.08”) 2720(107.09“)
3690(145.28”) 3360(132.28”)
2900
(114
.17”
)
49 50
◆ Features:● Common design.● Driven by dual hydraulic cylinders, make it ascent and descent smoothly.● Self-locking protective device with double safety.● Chain-style elevating system.● Balanced by steel wire rope.● Power unit can be installed on any side of lift.● Wide space between columns.● Multi-voltage power supply is available for convenient use.(220V or 380V).
Two Post Lift Two Post Lift
GM-6931 3.2T Two Post LiftGM-6941 4.0T Two Post Lift
ProductType
LiftWeight
LiftHeight
RiseTime
TotalHeight
TotalWidth
WidthBetween
Pillars
LaneWidth
LowestHeight
PowerSupply
GM-6931 3200kg1980mm(77.95") 50/s
2900mm(114.17")
3690mm(145.28")
3050mm(120.08")
2755mm(108.46")
101mm(3.98") 220/380V
GM-6931 3200kg1980mm(77.95") 50/s
2900mm(114.17")
3360mm(132.28")
2720mm(107.09")
2425mm(95.47")
101mm(3.98") 220/380V
GM-6941 4000kg1980mm(77.95") 50/s
2900mm(114.17")
3690mm(145.28")
3050mm(120.08")
2755mm(108.46")
101mm(3.98") 220/380V
GM-6941 4000kg1980mm(77.95") 50/s
2900mm(114.17")
3360mm(132.28")
2720mm(107.09")
2425mm(95.47")
101mm(3.98") 220/380V
2688
(105
.83”
)19
98(7
8.66
”)
R840(33.07”)
R840(33.07”)
R1185(46.65”)
R1185(46.65”)
2755(108.46”) 2425(95.47”)
51 52
GM-6831 3.2T Two Post Lift(Gantry)GM-6841 4.0T Two Post Lift(Gantry)
◆ Features:● Gantry design, without influencing the floor space.● Driven by dual hydraulic cylinders, make it ascent and descent smoothly.● Self-locking protective device with double safety.● Chain-style elevating system.● Balanced by steel wire rope.● Power unit can be installed on any side of lift.● Wide space between columns.● Multi-voltage power supply is available for convenient use.(220V or 380V).
Two Post Lift Two Post Lift
ProductType
LiftWeight
LiftHeight
RiseTime
TotalHeight
TotalWidth
WidthBetween
Pillars
LaneWidth
LowestHeight
PowerSupply
GM-6831 3200kg1980mm(77.95") 50/s
3700mm(145.67")
3690mm(145.28")
3050mm(120.08")
2755mm(108.46")
101mm(3.98") 220/380V
GM-6831 3200kg1980mm(77.95") 50/s
3700mm(145.67")
3360mm(132.28")
2720mm(107.09")
2425mm(95.47")
101mm(3.98") 220/380V
GM-6841 4000kg1980mm(77.95") 50/s
3700mm(145.67")
3690mm(145.28")
3050mm(120.08")
2755mm(108.46")
101mm(3.98") 220/380V
GM-6841 4000kg1980mm(77.95") 50/s
3700mm(145.67")
3360mm(132.28")
2720mm(107.09")
2425mm(95.47")
101mm(3.98") 220/380V
3050(120.08”)2720(107.09”)
Max
1980
(77.
95”)
M in101(3.98”)
3690(145.28”)3360(132.28”)
3700
(145
.67”
)
2688
(105
.83”
)19
98(7
8.66
”)
R840(33.07”)
R840(33.07”)
R1185(46.65”)
R1185(46.65”)
2755(108.46”) 2425(95.47”)
53 54
◆ Features:● Driven by dual hydraulic cylinders, make it ascent and descent smoothly.● Self-locking protective device with double safety.● Chain-style elevating system.● With strong capability, especially applys to imported cross-country cars.
Two Post Lift Two Post Lift
GM-6951 5.5T Two Post Lift
ProductType
LiftWeight
LowestHeight
LiftHeight
TotalHeight
TotalWidth
LaneWidth
N.W
GM-6951 5500Kg163mm(6.42")
1921mm(75.63")
3113mm(122.56")
3756mm(147.87")
2731mm(107.52") 1048Kg
3113
(122
.56”
)
3056(120.31”)
2716(106.93”)3756(147.87”)
Max
2021
(79.
57”)
Max
1921
(75.
63”)
Min
263(
10.3
5”)
Min
163(
6.42
”)
875
(34.
45”)
520(20.47”)
3070
(120
.87”
)
2306
(90.
79”)
2731(107.52”)
R943(37.13”)
R943(37.13”)
R1325(52.17”)
R1325(52.17”)
55 56
◆ Features:● Gantry design, without influencing the floor space.● Driven by dual hydraulic cylinders, make it ascent and descent smoothly.● Self-locking protective device with double safety.● Chain-style elevating system.● With strong capability, especially applys to imported cross-country cars.
Two Post Lift Two Post Lift
GM-6861 6.8T Two Post Lift
ProductType
LiftWeight
LowestHeight
LiftHeight
TotalHeight
TotalWidth
LaneWidth
N.W
GM-6861 6800Kg163mm(6.42")
1921mm(75.63")
4596mm(180.94")
3756mm(147.87")
2731mm(107.52") 1100Kg
1576
(62.
05”)
708(
27.8
7”)
Max
1921
(75.
63”)
Min
263(
10.3
5”)
Min
163(
6.42
”)
Max
2021
(79.
57”)
3
070(
120.
87”)
3756(147.87”)
3056(120.32”)
4456
(175
.43”
)
3070
(120
.87”
)23
06(9
0.79
”)
R943(37.13”)
R943(37.13”)
R1325(52.17”)
R1325(52.17”)
520(20.47”)
875
(34.
45”)
57 58
Four Post Lift Four Post Lift
◆ Features:● The positioning level is precise and adjustable, which is the ideal equipment for four-wheel alignment.● Lengthened sliding plate for various kinds of cars. Optional parts:● 3 or 2 ton manual rolling jack ● 3 or 2 ton pneumatic rolling jack.
GM-8331 3.5T Four Post LiftGM-8351 5.5T Four Post LiftGM-8353 5.5T Four Post Lift
ProductType
LiftWeight
TotalHeight
TotalWidth
Power
LiftHeight
LaneWidth
RunwayWidth
RunwayLength
PowerSupply
GM-8331 3500kg2430mm(95.67")
3380mm(133.07") 2.2Kw
1700mm(66.93")
2780mm(109.45")
510mm(20.08")
4570mm(179.92") 220V/380V
GM-8351 5500kg2430mm(95.67")
3380mm(133.07") 2.2Kw
1700mm(66.93")
2780mm(109.45")
510mm(20.08")
5250mm(206.69") 220V/380V
GM-8353 5500kg2430mm(95.67")
3380mm(133.07") 2.2Kw
1700mm(66.93")
2780mm(109.45")
510mm(20.08")
6330mm(249.21") 220V/380V
510
(20.
08”)
510
(20.
08”) 12
50-1
570
(49.
21”)
-(61
.81”
)
3160
(124
.41”
)26
30(1
03.5
4”)
1700
(66.
93”)
2430
(95.
67”)
180(
7.09
”)
900(35.43”)
GM-8331 4075(160.43”)GM-8351 4755(187.20”)GM-8353 5835(229.72”)
GM-8331 4320(170.08”)GM-8351 5000(196.85”)GM-8353 6080(239.37”)
GM-8331 4585(180.51”)GM-8351 5265(207.08”)GM-8353 6345(249.80”)
59 60
GM-8231 3.5T Four Post LiftGM-8251 5.5T Four Post LiftGM-8253 5.5T Four Post Lift
◆ Features:● The positioning level is precise and adjustable, which is the ideal equipment for four-wheel alignment.● Lengthened sliding plate for various kinds of cars. Optional parts:● 3 or 2 ton manual rolling jack ● 3 or 2 ton pneumatic rolling jack.
Four Post Lift Four Post Lift
ProductType
LiftWeight
TotalHeight
TotalWidth
Power
LiftHeight
LaneWidth
RunwayWidth
RunwayLength
PowerSupply
GM-8231 3500kg2430mm(95.67")
3160mm(124.41") 2.2Kw
1750mm(68.90")
2780mm(109.45")
510mm(20.08")
4570mm(179.92") 220V/380V
GM-8251 5500kg2430mm(95.67")
3160mm(124.41") 2.2Kw
1750mm(68.90")
2780mm(109.45")
510mm(20.08")
5250mm(206.69") 220V/380V
GM-8253 5500kg2430mm(95.67")
3160mm(124.41") 2.2Kw
1750mm(68.90")
2780mm(109.45")
510mm(20.08")
6330mm(249.21") 220V/380V
510
(20.
08”)
510
(20.
08”) 12
50-1
570
(49.
21”)
-(61
.81”
)
3160
(124
.41”
)26
30(1
03.5
4”)
1700
(66.
93”)
2430
(95.
67”)
180(
7.09
”)
900(35.43”)
GM-8231 4075(160.43”)GM-8251 4755(187.20”)GM-8253 5835(229.72”)
GM-8231 4320(170.08”)GM-8251 5000(196.85”)GM-8253 6080(239.37”)
GM-8231 4585(180.51”)GM-8251 5265(207.08”)GM-8253 6345(249.80”)
61 62
Four Post Lift Four Post Lift
GM-8141 4.5T Four Post LiftGM-8142 3.5T Four Post LiftGM-8144 5.5T Four Post Lift
◆ Features:● Driven by hydraulic cylinders, transmitted by steel wire rope, it works quietly, safely and reliably.● Steel wire rope and safety handle are fixed on top of column.● Approach ramps prevent vehicles from sliding backwards and front-wheel blocks prevent vehicles from sliding forward.● Numeric control bending machine and numeric control cutting machine are used to ensure precision of lift size.● Steel-ball blasting and plastic spraying workmanship are adopted to ensure the surface looking good for a long time. Optional parts:● 3 or 2 ton manual rolling jack ● 3 or 2 ton pneumatic rolling jack.
ProductType
LiftWeight
TotalHeight
TotalWidth
PowerLift
HeightLaneWidth
RunwayWidth
RunwayLength
PowerSupply
GM-8141 4500kg2225mm(87.60")
3120mm(122.83") 2.2Kw
1700mm(66.93")
2660mm(104.72")
490mm(19.29")
4860mm(191.34") 380V
GM-8142 3500kg2225mm(87.60")
3120mm(122.83") 2.2Kw
1700mm(66.93")
2660mm(104.72")
490mm(19.29")
4260mm(167.72") 380V
GM-8144 5500kg2225mm(87.60")
3470mm(136.61") 2.2Kw
1700mm(66.93")
3010mm(118.50")
490mm(19.29")
4860mm(191.34") 380V
970(38.19”)
2225
(87.
60”)
1700
(66.
93”)
170(
6.70
”)
GM
-814
1 3
120(
122.
83”)
GM
-814
2 3
120(
122.
83”)
GM
-814
4 3
470(
136.
61”)
GM
-814
1 2
660(
104.
72”)
GM
-814
2 2
260(
88.9
8”)
GM
-814
4 3
010(
118.
50”)
GM-8141 4960(195.28”)GM-8142 4360(171.65”)GM-8144 4960(195.28”)
GM-8141 4860(191.34”)GM-8142 4260(167.71”)GM-8144 4860(191.34”)
63 64
Four Post Lift Four Post Lift
GM-8041 4.5T Four Post Lift(Alignment)GM-8042 3.5T Four Post Lift(Alignment)GM-8044 5.5T Four Post Lift(Alignment)
◆ Features:● Front-open design, convenient for operation.● Driven by hydraulic cylinders, transmitted via steel; wire rope. ● Pneumatic mechanical locking system, protect whole operating process.● Insured mechanical locking system for cable broken.● Wide Stops(front and rear) for preventing vehicle sliding out of runway. Optional parts:● 3 or 2 ton manual rolling jack.● 3 or 2 ton pneumatic rolling jack.
ProductType
LiftWeight
TotalHeight
TotalWidth
PowerLift
HeightLaneWidth
RunwayWidth
RunwayLength
PowerSupply
GM-8041 4500kg2225mm(87.60")
3120mm(122.83") 2.2Kw
1750mm(68.90")
2660mm(104.72")
490mm(19.29")
4860mm(191.34") 380V
GM-8042 3500kg2225mm(87.60")
3120mm(122.83") 2.2Kw
1750mm(68.90")
2660mm(104.72")
490mm(19.29")
4260mm(167.72") 380V
GM-8044 5500kg2225mm(87.60")
3470mm(136.61") 2.2Kw
1750mm(68.90")
3010mm(118.50")
490mm(19.29")
4860mm(191.34") 380V
970(38.19”)
2225
(87.
60”)
1700
(66.
93”)
170(
6.70
”)
GM
-804
1 3
120(
122.
83”)
GM
-804
2 3
120(
122.
83”)
GM
-804
4 3
470(
136.
61”)
GM
-804
1 2
660(
104.
72”)
GM
-804
2 2
260(
88.9
8”)
GM
-804
4 3
010(
118.
50”)
GM-8041 4960(195.28”)GM-8042 4360(171.65”)GM-8044 4960(195.28”)
GM-8041 4860(191.34”)GM-8042 4260(167.71”)GM-8044 4860(191.34”)
65 66
Four Post Lift Four Post Lift
◆ Features:● Front-open design, convenient for operation.● Driven by hydraulic cylinder, transmitted via steel; wire rope. ● Pneumatic mechanical locking system, protect whole operating process.● Insured mechanical locking system for cable broken.● Wide Stops(front and rear) for preventing vehicle sliding out of runway. Optional parts:● 3 or 2 ton manual rolling jack.● 3 or 2 ton pneumatic rolling jack.
GM-8461 6.3T Four Post LiftGM-8451 5.5T Four Post LiftGM-8441 4.5T Four Post Lift
ProductType
LiftWeight
LowestHeight
LiftHeight
TotalHeight
TotalWidth
LaneWidth
RunwayWidth
RunwayLength
N.W
GM-8461 6300kg221mm(8.70")
1850mm(72.83")
2395mm(94.29")
3530mm(138.98")
3003mm(118.23")
510mm(20.08")
6151mm(242.17") 1870kg
GM-8451 5500kg221mm(8.70")
1850mm(72.83")
2395mm(94.29")
3530mm(138.98")
3003mm(118.23")
510mm(20.08")
5231mm(205.94") 1780kg
GM-8441 4500kg221mm(8.70")
1850mm(72.83")
2395mm(94.29")
3530mm(138.98")
3003mm(118.23")
510mm(20.08")
4851mm(190.98") 1740kg
3530(138.98”)2984(117.48”)
430(6.92”)
GM-8461 7403 (291.46”)GM-8451 6483 (255.24”)GM-8441 6103 (240.28”)
GM-8461 6151 (242.17”)GM-8451 5231 (205.94”)GM-8441 4851 (190.98”)
3003(118.23”)
3483(137.13”)
1875(73.82”)
1745(68.70”)
2395
(94.
29”)
Min221 - Max1850(8.70”) (72.83”)
4790(188.58”)
2275
(89.
57”)
Min
250-
-Max
1890
(9.8
4”)-
-(74
.41”
)
67 68
Four Post Lift Four Post Lift
GM-8051 5.5T Four Post Lift for Wheel Alignment
◆ Features:● Driven by hydraulic cylinders, transmitted by cable steel, it works quiet and safe and reliable.● Drive-up ramps prevent vehicles from sliding backward and front-wheel blocks prevent vehicles from sliding forward. Optional parts:● 2-ton manual rolling jack XT-2H.● 2-ton pneumatic rolling jack 2A.
ProductType
LiftWeight
Lift HeightTotal
HeightTotalWidth
LaneWidth
RunwayWidth
RunwayLength
GM-8051 5500kg1750mm(68.90")
2275mm(89.57")
3333mm(131.22")
2863mm(112.72")
490mm(19.29")
5190mm(204.33")
800-
1100
(31
.50”
)-(4
3.31
”)
5280(207.87”)
3333
(131
.22”
)48
5(19
.09”
) 48
5(19
.09”
)
69 70
Parking Lift Parking Lift
◆ Features:● Driven by hydraulic cylinders, transmitted by steel wire rope, it works quietly, safely and reliably.● Steel wire rope and safety handle are fixed on top of column.● Approach ramps prevent vehicles from sliding backwards and front-wheel blocks prevent vehicles from sliding forward.● Numeric control bending machine and numeric control cutting machine are used to ensure precision of lift size.● Steel -ball blasting and plastic spraying workmanship are adopted to ensure the surface looking good for a long time. Optional parts:● Safety insurance lock mechanism for cable breaking, avoid accident during lifting and lowering.
GM-8136 3.6T Parking Lift GM-8137 3.6T Parking Lift
ProductType
LiftWeight
LowestHeight
LiftHeight
TotalHeight
TotalWidth
LaneWidth
RunwayWidth
RunwayLength
N.W
GM-8136 3600kg122mm(4.80")
1900mm(74.80")
2237mm(88.07")
2630mm(103.54")
2267mm(89.25")
474mm(18.66")
4200mm(165.35") 760kg
GM-8137 3600kg122mm(4.80")
1830mm(70.05")
2237mm(88.07")
2780mm(109.45")
2417mm(95.16")
474mm(18.66")
4065mm(160.04") 750kg
Min
122
- Max
1900
(4.8
0”) -
(74.
80”)
Min
122
- Max
1830
(4.8
0”) -
(72.
04”)
(GM
-813
6)
(GM
-813
7)
2237
(GM
-813
6) (
88.0
7”)
2237
(GM
-813
7) (
88.0
7”)
4000(GM-8136) (157.48”)3865(GM-8137) (157.48”)
110(
4.33
”)
4460(GM-8136) (175.59”)4325(GM-8137) (170.28”)
474
(18.
66”)
474
(18.
66”)
2630
(GM
-813
6)(1
03.5
4”)
2780
(GM
-813
7)(1
09.4
5”)
1900
(GM
-813
6)(7
4.80
”)20
50 (G
M-8
137)
(80.
71”)
71 72
Scissor Lift
GM-4331 3.5T Scissor Lift(Super Ultrathin)
◆ Features:● Hidden structure of lengthened broad pallet, make lift run smoothly and synchronously, convenient for maintenance of vehicle underneath.● Impotted hydraulic,pneumatic and electric components, with stable and reliable equipment.● Pneumatic two-tooth self-locking against pipe explosion, released automatically when lowering.● Super-friction sliding block with oil-free.
Scissor Lift
ProductType
PowerSupply
Power Gas Source Lift Weight Lift Height
GM-4331 380V 2.2Kw 6-8kg/cm³ 3500kg2000mm(78.74")
280(11.02”)
2000(78.74”)880
(34.65”)1840
(72.44”)
1420(55.91”)
480(18.90”)
480(18.90”)
73 74
GM-4431 3.2T Scissor Lift
◆ Features:● Hidden structure of lengthened broad pallet, make lift run smoothly and synchronously, convenient for maintenance of vehicle underneath. ● Imported hydraulic,pneumatic and electric components, with stable and reliable equipment.● Electric two-tooth self-locking against pipe explosion, released automaticly when lowering.● Super-friction sliding block with oil-free.● Super thin structure without digging ground pits, convenient for driving on and off the lift.● Controlled by computer IC Board without misoperation.● Overbeam protective mechanism for preventing vehicle being damaged due to over-lifting, it will prolong the working life of hydraulic unit and cylinders.
Scissor Lift Scissor Lift
ProductType
PowerSupply
Power Lift Weight Lift Height
GM-4431 380V 2.2Kw 3200kg1820mm(71.65")
Min
191
(7.5
2”)
3705(145.87”)
910
(35.
83”)
530
(20.
87”)
530
(20.
87”)
1970
(77.
56”)
450
(18.
37”)
450
(18.
37”)
990(
38.9
8”)
1890
(74.
41”)
2050
(80.
71”)
Max
1820
(71.
65”)
M in1453(57.20”) - - Max1923(75.71”)
75 76
◆ Features:● Movable scissor lift with flexible and convenient use.● Driven by dual hydraulic cylinders, make it ascents and descents smoothly.● Equipped with different height of pads, used for raising many kinds of cars.
Scissor Lift Scissor Lift
GM-4221 2.6T Scissor Lift
ProductType
Loadcapacity
RaisingLowering
tire
Liftingheightmax
MotorPower
HydraulicoperatingPressure
Operatingenvironmenttemperature
Lifting height Width Powersupply
GM-4221 2600kg Approx.51s1300mm(51.18") 2.2KW 22MPa 5-55℃
100-1300mm(3.94"-51.18")
1453mm(57.20")
110V/60Hz
100
- 130
0(3
.94”
) - (5
1.18
”)
1800(70.87”)
102
(4.0
2”)
53(2.09”)
1008
(39.
69”)
1453
(57.
20”)
189
(7.4
4”)