Type AMD - Lindapter · Type AMD page 66 Anglian Metal Deck AMD60 and AMD80 Type SD2 - Slimdek 2...
2
® +44 (0) 1274 521444 © Lindapter International 2019 www.Lindapter.com 66 | Decking Fixings by Lindapter ® Type AMD Suitable for AMD60 and AMD80 decking profiles manufactured by Anglian Metal Deck. How to install... 1) Pre-assemble the locking plate and wedge (flat surface facing up) onto the threaded rod. 2) Insert wedge into the re-entrant channel of the decking, rotate 90°. 3) Slide plate up the threaded rod, over the wedge, to lock it in position into the channel. 4) Tighten the locknut beneath the plate to hold the assembly in position. Watch the installation video at www.Lindapter.com 1. 2. 3. 4. Although the Type AMD is similar in appearance to the Type AW, it should NOT be used in profiles manufactured by Hare Decking. For Characteristic Resistances when designing a connection to Eurocode 3, please refer to DoP No.018 on the website www.Lindapter.com/About/CE If the decking profile is deformed or distorted, do not install the fixing. If in doubt, contact the Technical Support team for advice. Install the decking fixings after the concrete has been poured and has reached full strength. Wedge Locking Plate Safe Working Load (FOS 3:1) Product Code Rod min 4.6 Tensile / 1 Rod Tightening Torque kN Nm AMD06 M6 1.0 10 AMD08 M8 1.0 10 AMD10 M10 1.0 10 Locking Plate: Pre-galvanised strip. Wedge: Malleable iron, bright zinc plated. RAIL FIXINGS HOLLO-BOLT FLOOR FIXINGS SUPPORT FIXINGS DECKING FIXINGS GIRDER CLAMPS LIFTING POINTS
Transcript of Type AMD - Lindapter · Type AMD page 66 Anglian Metal Deck AMD60 and AMD80 Type SD2 - Slimdek 2...
®+44 (0) 1274 521444 © Lindapter International 2019www.Lindapter.com
66 | Decking Fixings by Lindapter®
Type AMDSuitable for AMD60 and AMD80 decking profiles manufactured by Anglian Metal Deck.
How to install...
1) Pre-assemble the locking plate and wedge (flat surface facing up) onto the threaded rod.
2) Insert wedge into the re-entrant channel of the decking, rotate 90°.
3) Slide plate up the threaded rod, over the wedge, to lock it in position into the channel.
4) Tighten the locknut beneath the plate to hold the assembly in position.
Watch the installation video at www.Lindapter.com
1. 2. 3. 4.
Although the Type AMD is similar in appearance to the Type AW, it should NOT be used in profiles manufactured by Hare Decking.
For Characteristic Resistances when designing a connection to Eurocode 3, please refer to DoP No.018 on the website www.Lindapter.com/About/CE
If the decking profile is deformed or distorted, do not install the fixing. If in doubt, contact the Technical Support team for advice.
Install the decking fixings after the concrete has been poured and has reached full strength.
Wedge
Locking Plate
Safe Working Load (FOS 3:1)
Product Code Rod min 4.6 Tensile / 1 Rod Tightening Torque
kN Nm
AMD06 M6 1.0 10
AMD08 M8 1.0 10
AMD10 M10 1.0 10
Locking Plate: Pre-galvanised strip.Wedge: Malleable iron, bright zinc plated.
RA
IL F
IXIN
GS
HO
LL
O-B
OLT
FL
OO
R F
IXIN
GS
SU
PP
OR
T F
IXIN
GS
DE
CK
ING
FIX
ING
SG
IRD
ER
CL
AM
PS
LIF
TIN
G P
OIN
TS
Compatible ProfilesLindapter has developed an extensive range of CE Marked decking fixings to ensure optimum compatibility with all major decking profiles.
Components
Also available
Type TC - Toggle Clamp page 69
Designed for: Service suspension from pre-cast hollow core slabs (minimum core depth of 75mm) as well as Structural Hollow Section (SHS), steel sheeting or purlins.
Lindapter Decking Fixing Compatible Composite Decking Profile(s)
Type TR60 page 62
Structural Metal Decks (SMD) TR60+ and TR80+
Type MF page 63
Composite Metal Flooring (CMF®) MetFloor® 60 and MetFloor® 80
Type MW2 - Multiwedge 2 page 64
Kingspan® Structural Products Multideck® 60 and Multideck® 80
Type AW - Alphawedge page 65
Hare Decking (formerly Richard Lees®) Ribdeck® E60
Type AMD page 66
Anglian Metal Deck AMD60 and AMD80
Type SD2 - Slimdek 2 page 67
Tata Steel® Europe ComFlor® 225
Type VN page 68
Fits several profiles including: AMD54 (AMD), R51+ (SMD), ComFlor® 51+ (Tata Steel®), Holorib® (Hare Decking), Superib® (Hare Decking), Multideck® 50 (Kingspan®) and MetFloor® 55 (CMF®)
GIR
DE
R C
LA
MP
SR
AIL
FIX
ING
SL
IFT
ING
PO
INT
SH
OL
LO
-BO
LTF
LO
OR
FIX
ING
SS
UP
PO
RT
FIX
ING
SD
EC
KIN
G F
IXIN
GS
®+44 (0) 1274 521444www.Lindapter.com© Lindapter International 2019
Decking Fixings by Lindapter® | 61
