Tyco Mechanical Cad Library Help Manual - Fire & Safety …€¦ · · 2012-02-17Tyco Mechanical...
-
Upload
truongkhanh -
Category
Documents
-
view
233 -
download
5
Transcript of Tyco Mechanical Cad Library Help Manual - Fire & Safety …€¦ · · 2012-02-17Tyco Mechanical...
Table of contents
1. General Information
2. System requirements
3. Menu – Item “ File”
4. Menu – Item “View”
5. Menu – Item “Tools”
6. Menu – Item “?”
7. Toolbar
8. Configuration
Tyco Mechanical Cad Library Help Manual
1. General information With the TYCO Mechanical CAD Library, you can generate and handle TYCO-articles in different 2D- or 3D-File formats for your own CAD-application, e.g. AutoCAD.
For example you can configure yourselves in our channelconfiguration menus, on the basis known nominal sizes, the channel which corresponds to your requirements.
In addition it is possible with some articles to change the length manually.
Bills of material can be generate with the integrated BOM-generator-function directly out of the library.
Page 1 of 1General information
05/11/2007file://C:\Documents and Settings\mpr\Local Settings\Temp\~hh3DE8.htm
2. Systemrequirements In order to be able to use the TYCO Mechanical CAD Library, you need a PC with the following equipment:
Operating System: Windows ME/NT/98/2000/XP/Vista CPU: Minimum Pentium II with 500 MHz RAM: Minimum 512 MB RAM Resolution: Minimum 1024x768 Px
Page 1 of 1Systemrequirements
05/11/2007mk:@MSITStore:C:\Documents%20and%20Settings\mpr\Desktop\TMCL-help.chm::/sy...
3. Menu - Item "File"
3.1 File - New
With this option you provide a new Bill of material (BOM). The Bill of material up-to-date in the memory is overwritten thereby (Menu - Button ).
3.2 File - Open
Here you can load and process an already generated and stored Bill of material (Menu - Button ).
3.3 File - Save
Store your current Bill of material with this menu point (Menu - Button ).
3.4 File - Save As... Hereby you store the Bill of material up-to-date in the memory. Indicate to the desired file names and memory location. A iff-File (Interchange File Format) is provided.
3.5 File - Export BOM Export the current Bill of material (quantity, partnumber and description of article).
3.6 File - Generate CAD - 3D
Page 1 of 2Menu item File
05/11/2007file://C:\Documents and Settings\mpr\Local Settings\Temp\~hhD3DB.htm
Generate the selected article in the adjusted 3D-format (Menu - Button ). You are requested to start the CAD-application, which was selected in the attitudes (see "File - Generate CAD - Settings").
3.7 File - Generate CAD - 2D
Here you arrive at the 2D-CAD-expenditure. In the self-opening window, you are able to export the selected article or the own configuration in the 2D-format adjusted. (Menu - Button ). (see point 7.2 "Toolbar - 2D")
3.8 File - Generate CAD - Settings
With this menu option you have the possibility to select amongst others the different CAD-formats for 2D- and 3D-export (Menu - Button ).
Select the desired format in the respective field. With "Options" you are able to make further attitudes, like for example to the line-thick or line-color. In addition you have the possibility to select the desired language and to engage or disengage a 3D-coordinate system.
3.9 File - Exit Terminate TYCO Mechanical CAD Library.
Page 2 of 2Menu item File
05/11/2007file://C:\Documents and Settings\mpr\Local Settings\Temp\~hhD3DB.htm
4. Menu - Item "View"
Here you can adapt the user interface to your requirements by fading in or out different freely positionable representation windows. You have the choice between the windows "selection" and "3D preview". With pressed left mouse button it's possible to slide the current window. The single windows can be loosened from the main window by doubleclick on the frameworks.In addition the symbolbar as well as the statusbar can be faded in or out at this point.
4.1 View - Selection Choose with the TYCO Mechanical CAD Library the necessary articles or configurations selects, from the TYCO-product range
4.2 View - 3D Preview
Page 1 of 3Menu item View
05/11/2007file://C:\Documents and Settings\mpr\Local Settings\Temp\~hhC8A6.htm
Function to customize the viewer, by docking or replacing the window.
Minimize or maximizing of the 3D-preview window.
Zoom function for size adjustment of the 3D preview
Window - Possibility to mark a cutout from the 3D-preview, with the left mouse button, for the increased representation of details All - Function to adapt the preview of the 3D-object, to the size of the preview window In/Out - Incremental zoom in/zoom out
Selection of different view options of the current selected 3D-object
Switch to enable/disable the auto-preview. In case of complex 3D-models, is recommended to deactivate the auto-regeneration, in order to minimize the processor load.
Direct print-out function for the 3D-preview
4.3 View - Context menu (right mouse button)
Page 2 of 3Menu item View
05/11/2007file://C:\Documents and Settings\mpr\Local Settings\Temp\~hhC8A6.htm
The views as well as the zoom function, are attainable also with the right mouse key. In addition it's possible to displace the current data model in the indicating range by press and hold the "Shift"-key and hold the left mouse button simultaneous.
Page 3 of 3Menu item View
05/11/2007file://C:\Documents and Settings\mpr\Local Settings\Temp\~hhC8A6.htm
5. Menu - Item "Tools" 5.1 Tools - Settings
With this menu option you have the possibility to select amongst others the different CAD-formats for 2D- and 3D-export (Menu - Button ).
Select the desired format in the respective field. With "Options" you are able to make further attitudes, like for example to the line-thick or line-color. In addition you have the possibility to select the desired language and to engage or disengage a 3D-coordinate system.
Page 1 of 1Tools
05/11/2007mk:@MSITStore:C:\Documents%20and%20Settings\mpr\Desktop\TMCL-help.chm::/to...
6. Menu - Item "?"
6.1 "?" - Help Informations about the functions of the TYCO Mechanical CAD Library.
6.2 "?" - Disclaimer Liability and information about warranty.
6.3 "?" - Info about TYCO CAD Short information about the TYCO Mechanical CAD Library.
Page 1 of 1?
05/11/2007mk:@MSITStore:C:\Documents%20and%20Settings\mpr\Desktop\TMCL-help.chm::/qu...
7. Toolbar
7.1 Toolbar - 3D
Generate the selected article in the adjusted 3D-format. You are requested to start the CAD-application, which was selected in the attitudes (see 7.3 "Toolbar - Settings").
7.2 Toolbar - 2D
Here you arrive at the 2D-CAD-expenditure. In the self-opening window, you are able to export the selected article or the own configuration in the 2D-format adjusted. (see 3.7 "File - Generate CAD - 2D").
7.3 Toolbar - Settings
With this menu option you have the possibility to select amongst others the different CAD-formats for 2D- and 3D-export.
Select the desired format in the respective field. With "Options" you are able to make further attitudes, like for example to the line-thick or line-color. In addition you have the possibility to select the desired language and to engage or disengage a 3D-coordinate system.
Page 1 of 3Toolbar
05/11/2007mk:@MSITStore:C:\Documents%20and%20Settings\mpr\Desktop\TMCL-help.chm::/to...
7.4 Toolbar - Search
Activate the search function. You have the selection between three different view options here:
7.5 Toolbar - Standard list view
7.6 Toolbar - Show preview
7.7 Toolbar - Graphic selection
Page 2 of 3Toolbar
05/11/2007mk:@MSITStore:C:\Documents%20and%20Settings\mpr\Desktop\TMCL-help.chm::/to...
7.8 Toolbar - Info about TYCO CAD
Short information about the TYCO Mechanical CAD Library.
Page 3 of 3Toolbar
05/11/2007mk:@MSITStore:C:\Documents%20and%20Settings\mpr\Desktop\TMCL-help.chm::/to...
8. Configuration If you should not know the TYCO-partnumber, there is for some our products, the possibility to find the suitable article with configuration menus, by input of well-known basic data, e.g.: surface finish, height or thickness.
Selection of the necessary surface execution
Choose the suitable height.
Page 1 of 4Configuration
05/11/2007mk:@MSITStore:C:\Documents%20and%20Settings\mpr\Desktop\TMCL-help.chm::/co...
Selection of the needed material thickness, according to the static requirements.
Assortment of the different hole patterns or the non-perforated execution.
Selection of the possible delivery lengths.
Page 2 of 4Configuration
05/11/2007mk:@MSITStore:C:\Documents%20and%20Settings\mpr\Desktop\TMCL-help.chm::/co...
Indication of the preselected partnumber.
Display the article description of the selected article.
Input mode for a custom length, within an input area from 100mm to the delivery length indicated above.
Page 3 of 4Configuration
05/11/2007mk:@MSITStore:C:\Documents%20and%20Settings\mpr\Desktop\TMCL-help.chm::/co...
In the grey deposited text fields, no inputs can be made. These values are already specified.
Page 4 of 4Configuration
05/11/2007mk:@MSITStore:C:\Documents%20and%20Settings\mpr\Desktop\TMCL-help.chm::/co...
9. Trouble-shooting / Contact If you have further questions or need assistance respective TYCO Mechanical CAD Library, please contact
TYCO Fire Building Products
Kopersteden 1 P.O. Box 198 7500 AD Enschede The Netherlands
eMail: [email protected] Tel.: +31 (0)53 / 4284 411 Fax: +31 (0)53 / 4283 377
Page 1 of 1Contact
05/11/2007mk:@MSITStore:C:\Documents%20and%20Settings\mpr\Desktop\TMCL-help.chm::/co...
Headoffices:
Worldwide:USALansdale (PA)Tel: + 1 215-362-0700Fax: + 1 215-362-5385
Regional offices:Europe / Middle East /Africa (EMEA)The NetherlandsEnschedeTel.: +31 (0)53 4284444Fax: +31 (0)53 4283377
AsiaSingaporeTel: + 65 6861 1655Fax: + 65 6861 1312
Subsidiaries EMEA
Austria(Wien)Tel: +43 (0)1 2710049Fax: +43 (0)1 2710142
Belgium(Mechelen)Tel: +32 (0)15 285555Fax: +32 (0)15 206076
France(Paris)Tel: +33 (0)1 48178727Fax: +33 (0)1 48178720
Germany(Rodgau)Tel: +49 (0)6106 84455Fax: +49 (0)6106 18177
Hungary(Budapest)Tel: +36 (0)1 4811383Fax: +36 (0)1 2034427
Italy(Nerviano)Tel: +39 0331 583000Fax: +39 0331 583030
The Netherlands(Enschede)Tel: +31 (0)53 4284444Fax: +31 (0)53 4283377
Norway(Lørenskog)Tel: +47 67 917700Fax: +47 67 917715
Spain(Madrid)Tel: +34 91 3807460Fax: +34 91 3807461
Sweden(Lammhult)Tel: +46 (0)472 269980Fax: +46 (0)472 269989
United Arab Emirates(Dubai)Tel: +971 48838689Fax: +971 48838674
United Kingdom & Ireland(Manchester)Tel: +44 (0)161 8750400Fax: +44 (0)161 8750490(0491)
www.tycobuilding.com