TX-l42dt50y Panasonic TX-l42dt50bTX-lr42dt50 TX-l47dt50b TX-l47dt50y TX-lr47dt50 Chassis La35

69
Service Manual LCD Television TX-L42DT50B TX-L42DT50Y TX-LR42DT50 TX-L47DT50B TX-L47DT50Y TX-LR47DT50 LA35 Chassis Specifications Information in brackets [ ] refers to model 47” Power Source: 220-240V AC, 50 / 60Hz Rated Power Consumption: 116W [129W] Stand-by Power Consumption: 0.20W Aerial Impedance: 75 unbalanced, Coaxial Type Receiving System: DT50B ( UK ) DVB-T / T2 Digital terrestrial services (MPEG2 and MPEG4-AVC(H.264)) DVB-S/S2 Freesat services via Satellite dish input Receiver frequency range – 950 MHz to 2,150MHz LNB Power and Polarisation – Vertical: +13V Horizontal: +18V Current: Max. 500mA (overload protection) 22 kHz Tone – Frequency: 22kHz ± 2kHz Amplitude: 0.6V ± 0.2V Symbol Rate – Max. 30MS/s FEC Mode – 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 Demodulation – QPSK, 8PSK Not available for DiSEqC control PAL I UHF E21-E68 PAL 525/60 (AV only) M.NTSC (AV only) NTSC (AV only) © Panasonic Corporation 2012. Unauthorized copying and distribution is a violation of law. ORDER No. PCZ1203053CE

description

TX-l42dt50y Panasonic TX-l42dt50bTX-lr42dt50 TX-l47dt50b TX-l47dt50y TX-lr47dt50 service and repair manual

Transcript of TX-l42dt50y Panasonic TX-l42dt50bTX-lr42dt50 TX-l47dt50b TX-l47dt50y TX-lr47dt50 Chassis La35

  • Service ManualLCD Television

    TX-L42DT50B TX-L42DT50Y TX-LR42DT50 TX-L47DT50B TX-L47DT50Y TX-LR47DT50

    LA35 Chassis

    Specifications Information in brackets [ ] refers to model 47

    Power Source: 220-240V AC, 50 / 60Hz

    Rated Power Consumption: 116W [129W] Stand-by Power Consumption: 0.20W Aerial Impedance: 75 unbalanced, Coaxial Type Receiving System: DT50B ( UK ) DVB-T / T2 Digital terrestrial services (MPEG2 and MPEG4-AVC(H.264)) DVB-S/S2 Freesat services via Satellite dish input Receiver frequency range 950 MHz to 2,150MHz LNB Power and Polarisation Vertical: +13V Horizontal: +18V Current: Max. 500mA (overload protection) 22 kHz Tone Frequency: 22kHz 2kHz Amplitude: 0.6V 0.2V Symbol Rate Max. 30MS/s FEC Mode 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 Demodulation QPSK, 8PSK Not available for DiSEqC control PAL I UHF E21-E68 PAL 525/60 (AV only) M.NTSC (AV only) NTSC (AV only)

    Panasonic Corporation 2012. Unauthorized copying and distribution is a violation of law.

    ORDER No. PCZ1203053CE

  • DT50B ( Ireland ) DVB-T Digital terrestrial services (MPEG2 and MPEG4-AVC(H.264)) DVB-S/S2 Receiver frequency range 950 MHz to 2,150MHz LNB Power and Polarisation Vertical: +13V Horizontal: +18V Current: Max. 500mA (overload protection) 22 kHz Tone Frequency: 22kHz 2kHz Amplitude: 0.6V 0.2V Symbol Rate Max. 30MS/s FEC Mode 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 Demodulation QPSK, 8PSK Not available for DiSEqC control PAL I VHF A-J UHF E21-E69 CATV S1-S20 CATV S21-S41(Hyperband) PAL 525/60 (AV only) M.NTSC (AV only) NTSC (AV only) DT50Y DVB-T / T2 Digital terrestrial services (MPEG2 and MPEG4-AVC(H.264)) DVB-C Digital cable services (MPEG2 and MPEG4-AVC(H.264)) DVB-S/S2 Digital satellite services (MPEG2 and MPEG4-AVC(H.264)) Receiver frequency range 950 MHz to 2,150MHz LNB Power and Polarisation Vertical: +13V Horizontal: +18V Current: Max. 500mA (overload protection) 22 kHz Tone Frequency: 22kHz 2kHz Amplitude: 0.6V 0.2V Symbol Rate Max. 30MS/s FEC Mode 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 Demodulation QPSK, 8PSK DiSEqC Version 1.0. PAL I/H, B/G, SECAM B/G, L/L VHF E2-E12 VHF H1-H2 ( ITALY ) VHF A-H ( ITALY ) UHF E21-E69 CATV (S01-S05) CATV S1-S10(M1-M10) CATV S11-S20 (U1-U10) CATV S21-S41 (HYPERBAND) PAL D/K, SECAM D/K VHF R1-R2 VHF R3-R5 VHF R6-R12 UHF E21-E69 PAL 525/60 (AV only) M.NTSC (AV only) NTSC (AV only) LR_DT50 DVB-T / T2 Digital terrestrial services (MPEG2 and MPEG4-AVC(H.264)) DVB-C Digital cable services (MPEG2 and MPEG4-AVC(H.264)) DVB-S/S2 Digital satellite services (MPEG2 and MPEG4-AVC(H.264)) Receiver frequency range 950 MHz to 2,150MHz LNB Power and Polarisation Vertical: +13V Horizontal: +18V Current: Max. 500mA (overload protection) 22 kHz Tone Frequency: 22kHz 2kHz Amplitude: 0.6V 0.2V Symbol Rate Max. 30MS/s FEC Mode 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 Demodulation QPSK, 8PSK DiSEqC Version 1.0. PAL D/K, SECAM D/K VHF R1-R2 VHF R3-R5 VHF R6-R12 UHF E21-E69 PAL 525/60 (AV only) M.NTSC (AV only) NTSC (AV only)

    2

  • Aerial - Rear: DT50B ( UK ) DT50B ( Ireland ) / DT50Y / LR_DT50 UHF VHF/UHF Satellite dish input: Female F-type 75 Operating Conditions: Temperature: 0C 35C Humidity: 20% 80% RH (non condensing) Terminals: AV1 IN Video (21 pin) 1V p-p 75 Audio (21 pin) 500mV rms 10k RGB (21 pin) 0.7V p-p 75 AV1 OUT Video (21 pin) 1V p-p 75 Audio (21 pin) 500mV rms 1k AV2 IN Video (RCAx1) 1V p-p 75 (COMPONENT/VIDEO) Audio (RCAx2) 500mV rms 10k (used for HDMI_with the supplied AV cable)

    Video (RCAx3) Y:1V p-p 75 (including synchronization) Pb, Pr: 0.35V p-p 75

    HDMI1, HDMI2, HDMI3, HDMI4 Type A Connectors HDMI 1/3/4 :3D, Content Type, Deep Colour HDMI 2 :3D, Content Type, Audio Return Channel, Deep Colour This TV supports HDAVI Control 5 function. DIGITAL AUDIO OUT PCM / Dolby digital / DTS, Fiber optic USB 1/2/3 USB 2.0 DC 5V, Max 500mA PC HIGH-DENSITY D_SUB 15PIN R,G,B: 700mV p-p 75 HD,VD/TTL Level 2-5V p-p (high impedance)

    ETHERNET RJ45, IEEE802.3 10BASE-T / 100BASE-TX CARD SLOT SD CARD slot x1 Common interface slot (Complies with CI+) x1 Wireless LAN: Standard Compliance IEEE802.11a/n , IEEE802.11b/g/n

    Frequency Range IEEE802.11a/n: 5.180 GHz 5.320 GHz 5.500 GHz 5.580 GHz 5.660 GHz 5.700 GHz IEEE802.11b/g/n: 2.412 GHz 2.472 GHz Security WPA2-PSK (TKIP/AES) WPA-PSK (TKIP/AES) WEP(64 bit/128 bit) Bluetooth wirelless technology: Standard Compliance Bluetooth 3.0

    Frequency Range 2.402 GHz 2.480 GHz LCD screen: VVX42F130B20 [VVX47F130B20] 1920 x 1080, 16:9 Visible Diagonal 1070mm [1190mm] Speaker: 8 train speaker x 2, Woofer ( 75mm) x 1

    Audio Output: 18W (4W +4W +10W)

    Headphones: 3.5mm (M3), stereo mini jack 1x, 8 Impedance

    Accessories supplied : Remote Control 2 x R6 (UM3) Batteries SCART Cable AV Cable

    3

  • Dimensions:

    Width: Height: Depth: Including TV stand 958mm 615mm 258mm [1,067mm 677mm 265mm]

    TV set only 958mm 569mm 27mm [1,067mm 631mm 27mm]

    Mass: Including TV stand 14.5kg [17.0kg] TV set only 11.0kg [13.0kg]

    Design and Specifications are subject to change without notice. Mass and dimensions shown are approximate. This equipment complies with the EMC standards listed below: EN55013, EN61000-3-2, EN61000-3-3, EN55020, EN55022, EN55024

    This service information is designed for experienced repair technicians only and is not designed for use by the general public. It does not contain warnings or cautions to advise non-technical individuals of potencial dangers in attempting to service a product. Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service or repair the product or products deal within this service information by anyone else could result in serious injury or death.

    Warning

    4

  • CONTENTSSAFETY PRECAUTIONS ........................................... 6

    GENERAL GUIDE LINES...................................... 6

    TOUCH CURRENT CHECK............................... 6

    PREVENTION OF ELECTROSTATIC DISCHARGE

    (ESD) TO ELECTROSTATICALLY SENSITIVE (ES)

    DEVICES .................................................................... 7

    ABOUT LEAD FREE SOLDER (PBF)......................... 8

    SUGGESTED PB FREE SOLDER........................ 8

    APPLICABLE SIGNALS.............................................. 9

    SERVICE HINTS ...................................................... 10

    CHASSIS BOARD LAYOUT ..................................... 11

    LOCATION OF LEAD WIRING ................................. 11

    TECHNICAL DESCRIPTION .................................12

    SPECIFICATION OF KEY FOR CI PLUS,

    DTCP-IP, ONE-TO-ONE, WIDEVINE, NETFLIX. 12

    GENERAL INFORMATION ................................. 12

    REPLACEMENT OF ICS..................................... 12

    MODEL AND KEYS ............................................ 12

    USB HDD RECORDING ..................................... 12

    SETTING INSPECTION............................................ 13

    SELF CHECK ........................................................... 14

    POWER LED BLINKING TIMING CHART................ 16

    SERVICE MODE FUNCTION ................................... 17

    SERVICE ................................................................ 18

    SERVICE TOOL MODE............................................ 19

    HOTEL MODE .......................................................... 20

    DATA COPY BY SD CARD ...................................... 21

    DATA COPY FROM TV SET TO SD CARD ............. 22

    DATA COPY FROM SD CARD TO TV SET ............. 23

    OPTION BYTES DESCRIPTION .............................. 24

    ADJUSTMENT METHOD ......................................... 25

    WIRING DIAGRAM................................................... 26

    BLOCK DIAGRAM (1 OF 2)...................................... 27

    PARTS LOCATION................................................... 29

    REPLACEMENT PARTS LIST.................................. 31

    SCHEMATIC DIAGRAMS......................................... 42

    A-BOARD (1 OF 20) SCHEMATIC DIAGRAM .... 43

    LD-BOARD.......................................................... 63

    K-BOARD, LP-BOARD........................................ 64

    CONDUCTOR VIEWS .............................................. 65

    5

  • Safety PrecautionsGeneral Guide Lines

    1. When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or damaged by the short circuit.

    2. After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly installed.

    3. After servicing, make the following touch current checks to prevent the customer from being exposed to shock hazards. 4. Always ensure cover label TBM4GU113 is correctly replaced before returning to customer (see Fig.1). Touch-Current Check 1. Plug the AC cord directly into the AC outlet. Do not use an isolation transformer for this check. 2. Connect a measuring network for touch currents between each exposed metallic part on the set and a good earth

    ground such as a water pipe, as shown in Fig. 2. 3. Use Leakage Current Tester (Simpson 228 or equivalent) to measure the potential across the measuring network. 4. Check each exposed metallic part, and measure the voltage at each point. 5. Reserve the AC plug in the AC outlet and repeat each of the above measure. 6. The potential at any point (TOUCH CURRENT) expressed as voltage U1 and U2, does not exceed the following values:

    For a. c.: U1 = 35 V (peak) and U2 = 0.35 V (peak); For d. c.: U1 = 1.0 V, Note: The limit value of U2 = 0.35 V (peak) for a. c. and U1 = 1.0 V for d. c. correspond to the values 0.7 mA (peak) a. c. and 2.0 mA d. c. The limit value U1 = 35 V (peak) for a. c. correspond to the value 70 mA (peak) a. c. for frequencies greater than 100 kHz.

    7. In case a measurement is out of the limits specified, there is a possibility of a shock hazard, and the equipment should be repaired and rechecked before it is returned to the customer.

    Fig. 2

    TO APPLIANCES EXPOSED METAL PARTS

    Resistance values in ohms ()

    V R0=500

    RS=1500 CS=0.22F

    10k

    0.022F

    COLD WATER PIPE (EARTH GROUND)

    V: Voltmetr or oscilloscope (r.m.s. or peak reading)

    Measuring network for TOUCH CURRENTS

    Input resistance: 1M Input capacitance:200pF Frequency range: 15Hz to 1MHz and d.c.respectively

    NOTE Appropriate measures should be taken to obtain the correct value in case of non-sinusoidal waveforms

    U2 (V)

    Fig. 1

    U1 (V)

    6

  • Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor "chip" components. The following techniques should be used to help reduce the incidence of component damage caused by electrostatic discharge (ESD). 1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any ESD on

    your body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging ESD wrist strap, which should be removed for potential shock reasons prior to applying power to the unit under test.

    2. After removing an electrical assembly equipped with ES devices, place the assembly on a conductive surface such as aluminum foil, to prevent electrostatic charge build up or exposure of the assembly.

    3. Use only a grounded-tip soldering iron to solder or unsolder ES devices. 4. Use only an anti-static solder removal device. Some solder removal devices not classified as "anti-static (ESD

    protected)" can generate electrical charge sufficient to damage ES devices. 5. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ES devices. 6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it.

    (Most replacement ES devices are packaged with leads electrically shorted together by conductive foam, aluminum foil or comparable conductive material).

    7. Immediately before removing the protective material from the leads of a replacement ES device, touch the protective material to the chassis or circuit assembly into which the device will be installed. Caution Be sure no power is applied to the chassis or circuit, and observe all other safety precautions.

    8. Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise harmless motion such as the

    brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity (ESD) sufficient to damage an ES device).

    There are special components used in this equipment which are important for safety. These parts are marked by in schematic diagrams, exploded views and replacement parts list. It is essential that these critical parts should be replaced with manufacturers specified parts to prevent shock, fire, or other hazards. Do not modify the original design without permission of manufacturer.

    IMPORTANT SAFETY NOTICE

    7

  • About lead free solder (PbF) Note: Lead is listed as (Pb) in the periodic table of elements. In the information below, Pb will refer to Lead solder, and PbF will refer to Lead Free Solder. The Lead Free Solder used in our manufacturing process and discussed below is (Sn+Ag+Cu). That is Tin (Sn), Silver (Ag) and Copper (Cu) although other types are available. This model uses Pb Free solder in its manufacture due to environmental conservation issues. For service and repair work, wed suggest the use of Pb free solder as well, although Pb solder may be used. PCBs manufactured using lead free solder will have the PbF within a leaf Symbol stamped on the back of PCB. Caution

    Pb free solder has a higher melting point than standard solder. Typically the melting point is 50 ~ 70 F (30~40C) higher. Please use a high temperature soldering iron and set it to 700 20 F (370 10 C).

    Pb free solder will tend to splash when heated too high (about 1100 F or 600 C). If you must use Pb solder, please completely remove all of the Pb free solder on the pins or solder area before applying Pb solder. If this is not practical, be sure to heat the Pb free solder until it melts, before applying Pb solder.

    After applying PbF solder to double layered boards, please check the component side for excess solder which may flow onto the opposite side. (see Fig.3)

    Suggested Pb free solder There are several kinds of Pb free solder available for purchase. This product uses Sn+Ag+Cu (tin, silver, copper) solder. However, Sn+Cu (tin, copper), Sn+Zn+Bi (tin, zinc, bismuth) solder can also be used. (see Fig.4)

    Fig.3

    Fig.4

    8

  • Applicable Signals Applicable input signal for PC is basically compatible to VESA standard timing.

    Signal name Horizontal frequency (kHz) Vertical frequency (Hz)

    640 480 @60 Hz 31.47 59.94 800 600 @60 Hz 37.88 60.32 852 480 @60Hz 31.44 59.89 1,024 768 @60Hz 48.36 60.00 1,280 768 @60Hz 47.70 60.00 1,280 1,024 @60Hz 63.98 60.02 1,366 768 @60Hz 48.39 60.04

    Applicable input signal for PC is basically compatible to HDMI standard timing.

    Signal name Horizontal frequency (kHz) Vertical frequency (Hz)

    640 480 @60 Hz 31.47 60.00 1,280 720 @60 Hz 45.00 60.00 1,920 1,080 @60Hz 67.50 60.00

    Note:

    Signals other than above may not be displayed properly. The above signals are reformatted for optimal viewing on your display. PC signal is magnified or compressed for display, so that it may not show fine detail with sufficient clarity.

    Signal name COMPONENT HDMI

    525 (480) / 60i,60p * * 625 (576) / 50i, 50p * * 750 (720) / 60p, 50p * * 1,125 (1,080) / 60i, 50i * * 1,125 (1,080) / 60p * 1,125 (1,080) / 50p * 1,125 (1,080) / 24p *

    PC (from D-sub 15P)

    PC (from HDMI terminal)

    Component (Y, Pb, Pr) (from AV2 terminal), HDMI

    9

  • Service Hints How to remove the backcover Remove the 1 fixing screw and WIFI DONGLE. (see Fig.5) Remove the 1 fixing screw and BT DONGLE. (see Fig.5)

    Remove the 28 fixing screws, 4 caps and the backcover. (see Fig.6)

    How to remove the pedestal assembly. Lay the main unit face down. (see Fig.7) Remove the 2 fixing screws and the cover of the stand. (see Fig.8) Remove the 4 fixing screws and the pedestal assembly. (see Fig.9)

    Fig.5

    (2) (2)

    SCREWS (2) THEC1509 /2pcs/

    (1)

    Fig.6

    SCREWS (1) THEC1509 /28pcs/ (3) TKKL55351 /4pcs/

    (1) (1) (1)

    (1)

    (1) (1)

    (1)(1)

    (1)

    (1)

    (3) (3)

    (3)(1)

    (1) (1)

    (1) (1)

    (1)(3)

    SCREWS (4) XYN4+F10FJK /6pcs/ Fig.8

    (4) (4)

    (4) (4)

    Fig.9

    (4) (4)

    (1) (1) (1)

    (1)

    (1)

    (1)

    (1)

    (1) (1) (1)

    (1)

    10

  • Chassis Board Layout

    Location of Lead Wiring To find the Part Number of required wire in Replacement Parts List click on the wire name in red box.

    Board Name Function A-Board AV Terminal, HDMI, HDMI Switch, USB, USB HUB, Digital Audio Out,

    Tuner DVB-T/T2/C/S/S2, SD Card, CI slot, PC, Ethernet, Wireless LAN, Bluetooth, Peaks IC, Speakers out, EEPROM, Flash Memory, DDR SDRAM

    P-Unit Main Input, Power Supply, Key control, Power switch LD-Board LED Driver LP-Board Panabadge LED K-Board Power and Timer LED, C.A.T.S RM-Unit Remote Receiver

    TC-Unit on panel

    P-Unit

    K-Board

    A-Board

    A02

    SP_L

    A10

    A20

    K10

    A15

    SP_R

    42 A10-K10-LP10-RM10 WIRE 42 A20-USB CABLE

    P2

    P4

    42 A02-P2 WIRE 42 LVDS FFC

    CN001

    TU6702

    WIFI

    42 A12A-SPK-SPW WIRE

    47 A02-P2 WIRE 47 LVDS FFC 47 A12A-SPK-SPW WIRE

    47 A10-K10-LP10-RM10 WIRE 47 A20-USB CABLE

    A21

    42 P4-LD41 WIRE

    47 P4-LD4 WIRE

    42 A21-BT WIRE

    47 A21-BT WIRE

    BT

    WOOFER BOX

    CN100CN700

    A12A

    LD-Board

    LP-Board

    LP10

    42 LD3-CN100 CABLE

    47 LD3-CN100 CABLE

    RM-Unit

    RM10

    11

  • Technical Description Specification of KEY for CI Plus, DTCP-IP, One-to-One, Widevine and Netflix General information: 1. EEPROM (IC8902) for spare parts has the seed of KEY for each. 2. The final KEY data will be generated by LDA4 IC (IC8000) when SELF CHECK was done and are stored in both LDA4 IC (IC8000) and EEPROM (IC8902). All KEYs are not generated for all models. The necessary KEY are only generated and stored depend on the feature of models. Replacement of ICs: When LDA4 IC (IC8000) is replaced, EEPROM (IC8902) should be also replaced with new one the same time. When EEPROM (IC8902) is replaced, LDA4 IC (IC8000) is not necessary to be replaced the same time. After the replacement of IC, SELF CHECK should be done to generate the final KEY data. How to SELF CHECK: While pressing [VOLUME ( - )] button on the main unit, press the STATUS button on the remote control for more than 3 seconds. TV will be forced to the factory shipment setting after this SELF CHECK. Model and Keys:

    USB HDD Recording: General information: Digital TV programmes can be recorded in USB HDD. A One-to-One key generated in A-board by SELF CHECK binds TV and USB-HDD for communication. That key is only one key for them. If the key is difference, TV can not access USB-HDD. Caution: New key will be generated by following SELF CHECK and previous TV programmes recorded in USB HDD will not be viewed. SELF CHECK: While pressing [VOLUME ( - )] button on the main unit, press the STATUS button on the remote control for more than 3 seconds

    Keys Model No. CI PLUS DTCP-IP One-to-One (for USB Rec.) Widevine Netflix

    TX-L42DT50B Yes Yes Yes Yes Yes TX-L42DT50Y Yes Yes Yes Yes Yes TX-LR42DT50 Yes None None Yes Yes TX-L47DT50B Yes Yes Yes Yes Yes TX-L47DT50Y Yes Yes Yes Yes Yes TX-LR47DT50 Yes None None Yes Yes

    12

  • Setting Inspection Voltage Confirmation

    A board Description Test point Voltage

    SUB1.1V TP8100 1.10V - 1.22V SUB 1.5 V TP8101 1.435V - 1.585V SUB1.8V TP8700 1.7V 1.9V SUB3.3V TP5400 3.17V 3.43V SUB5V TP5420 4.80V - 5.25V USB5V TP5440 4.94V 5.40V FE1.2V TP5780 1.14V 1.26V FE1.2V/2.5V TP5720 2.375V 2.625V PNL12V TP4004 (TP4005) 11.5V 12.9V

    Horizontal 17.0V - 19.0V LNB_OUTPUT TP6702 Vertical 12.5V 14.0V

    13

  • Self Check Self-check is used to automatically check the bus lines and hexadecimal code of the TV set. To enter Self-Check mode, keep pressing the down (-/v) button on the TV set and press the STATUS button on the remote control. To exit Self Check, switch off the TV set at the power button.

    TX-L42DT50B 42FHD Panasonic 2012LCD Self Check Complete

    TUN O.K. STBY O.K. MEM1 O.K. MEM2 O.K.. LAN O.K. ZWEI O.K. FE O.K. SAT-TU O.K. ID O.K. ID2 O.K. HDMI-SW O.K. BT O.K. WiFi O.K.

    PEAKS-SOFT 1.212PEAKS-EEP 01.03.0057 LSI-PACKAGE 2.421 LSI-RELEASE 1.08 STBY-SOFT 1.03.02 STBY-EEP 1.00.0014 STBY-ROMCORR 0.00.00 ZWEI-SOFT 04010008

    SUM C03E MODEL ID 09 03107100 00000020

    TX-L42DT50Y 42FHD Panasonic 2012LCD Self Check Complete

    TUN O.K. STBY O.K. MEM1 O.K. MEM2 O.K.. LAN O.K. ZWEI O.K. FE O.K. SAT-TU O.K. ID O.K. ID2 O.K. HDMI-SW O.K. BT O.K. WiFi O.K.

    PEAKS-SOFT 1.212PEAKS-EEP 01.04.0023 LSI-PACKAGE 2.421 LSI-RELEASE 1.08 STBY-SOFT 1.03.02 STBY-EEP 1.00.0014 STBY-ROMCORR 0.00.00 ZWEI-SOFT 04010008

    SUM C013 MODEL ID 09 03127100 00000020

    TX-LR42DT50 42FHD Panasonic 2012LCD Self Check Complete

    TUN O.K. STBY O.K. MEM1 O.K. MEM2 O.K.. LAN O.K. ZWEI O.K. FE O.K. SAT-TU O.K. ID O.K. ID2 O.K. HDMI-SW O.K. BT O.K. WiFi O.K.

    PEAKS-SOFT 1.212PEAKS-EEP 01.04.0045 LSI-PACKAGE 2.421 LSI-RELEASE 1.08 STBY-SOFT 1.03.02 STBY-EEP 1.00.0014 STBY-ROMCORR 0.00.00 ZWEI-SOFT 04010008

    SUM BF48 MODEL ID 09 03157100 00000020

    TX-L47DT50B 47FHD Panasonic 2012LCD Self Check Complete

    TUN O.K. STBY O.K. MEM1 O.K. MEM2 O.K.. LAN O.K. ZWEI O.K. FE O.K. SAT-TU O.K. ID O.K. ID2 O.K. HDMI-SW O.K. BT O.K. WiFi O.K.

    PEAKS-SOFT 1.212PEAKS-EEP 01.03.0056 LSI-PACKAGE 2.421 LSI-RELEASE 1.08 STBY-SOFT 1.03.02 STBY-EEP 1.00.0014 STBY-ROMCORR 0.00.00 ZWEI-SOFT 05010008

    SUM C003 MODEL ID 09 03107100 00020000

    14

  • Display Ref. No. Description P.C.B. TUN TU6702 TUNER A-Board STBY IC8000 Peaks-LDA4 A-Board MEM1 IC8900 NAND FLASH MEMORY A-Board MEM2 IC8902 EEPROM PEAKS LDA4 A-Board LAN IC8600 LAN CONTROLER A-Board ZWEI TC-unit TC-unit on panel TC-unit FE IC6900 DVB-T2 DEMODULATOR A-Board SAT-TU TU6702 TUNER A-Board ID IC8902 CI+, DTCP-IP, C2mod A-Board ID2 IC8902 WIDEVINE , NETLFLIX A-Board HDMI SW IC4700 HDMI SWITCH A-Board

    BT IC8458 N5HZZ0000110 USB HUB

    BT DONGLE A-Board

    BT Dongle

    WiFi IC8458 N5HBZ0000061 USB HUB

    WIFI DONGLE A-Board

    Wifi Dongle

    If the CCU ports have been checked and found to be incorrect or not located then " - - " will appear in place of "O.K.".

    TX-L47DT50Y 47FHD Panasonic 2012LCD Self Check Complete

    TUN O.K. STBY O.K. MEM1 O.K. MEM2 O.K.. LAN O.K. ZWEI O.K. FE O.K. SAT-TU O.K. ID O.K. ID2 O.K. HDMI-SW O.K. BT O.K. WiFi O.K.

    PEAKS-SOFT 1.212PEAKS-EEP 01.04.0022 LSI-PACKAGE 2.421 LSI-RELEASE 1.08 STBY-SOFT 1.03.02 STBY-EEP 1.00.0014 STBY-ROMCORR 0.00.00 ZWEI-SOFT 05010008

    SUM BFD8 MODEL ID 09 03127100 00020000

    TX-LR47DT50 47FHD Panasonic 2012LCD Self Check Complete

    TUN O.K. STBY O.K. MEM1 O.K. MEM2 O.K.. LAN O.K. ZWEI O.K. FE O.K. SAT-TU O.K. ID O.K. ID2 O.K. HDMI-SW O.K. BT O.K. WiFi O.K.

    PEAKS-SOFT 1.212PEAKS-EEP 01.04.0044 LSI-PACKAGE 2.421 LSI-RELEASE 1.08 STBY-SOFT 1.03.02 STBY-EEP 1.00.0014 STBY-ROMCORR 0.00.00 ZWEI-SOFT 05010008

    SUM BF0D MODEL ID 09 03157100 00020000

    15

  • 4 sec Once

    Power LED blinking timing chart 1. Subject

    Information of LED Flashing timing chart. 2. Contents

    When abnormality has occurred the unit, the protection circuit operates and reset to the stand by mode. At this time, the defective block can be identified by number of blinking of the Power LED on the front panel of the unit.

    Blinking times Blinking timing Contents Check point

    1 BL_SOS

    A BOARD P BOARD

    3

    IROM SOS

    A BOARD

    7

    SUB3.3V_SENSE_SOS

    A BOARD

    8

    SOS

    A BOARD

    9

    SOUND_SOS

    A BOARD

    10

    ZWEI_SOS TC-unit on panel

    12

    BE_SOS A BOARD

    13

    EMERGENCY A BOARD

    No Light

    Light

    16

  • Service Mode Function MPU controls the functions switching for each IICs through IIC bus in this chassis. The following setting and adjustment can be adjusted by remote control in Service Menu How to enter SERVICE While pressing (-/v) button on the TV unit, press on the remote control for 3 times within 2 seconds. Note: To exit from Service mode, press the exit button on remote control.

    0

    17

  • SERVICE

    S e r v i c e 1

    216

    SERVICE ADJUST WB-ADJ OPTION SRV-TOOL DRV CHECK

    ADJUST DYNAMIC CONTRAST YMAX

    1,2:MAIN SELECT 3,4:SUB SELECT 9:PICTURE MENU SELECT YELLOW:AUTO ADJUST VOL :ADJUST OK :WRITE

    000 ADJUST DYNAMIC COLOR

    1,2:MAIN SELECT 3,4:SUB SELECT 9:PICTURE MENU SELECT VOL :ADJUST OK :WRITE

    50

    1,2:MAIN SELECT 3,4:SUB SELECT 9:PICTURE MENU SELECT VOL :ADJUST OK :WRITE

    ADJUST DYNAMICSUB-BRT

    1,2:MAIN SELECT3,4:SUB SELECT 9:PICTURE MENU SELECT VOL :ADJUST OK :WRITE

    800 ADJUST DYNAMICBACKLGT

    1,2:MAIN SELECT3,4:SUB SELECT 9:PICTURE MENU SELECT VOL :ADJUST OK :WRITE

    200 ADJUST DYNAMICH-POS

    1,2:MAIN SELECT3,4:SUB SELECT 9:PICTURE MENU SELECT VOL :ADJUST OK :WRITE

    0ADJUST DYNAMIC H-AMP

    1,2:MAIN SELECT 3,4:SUB SELECT 9:PICTURE MENU SELECT VOL :ADJUST OK :WRITE

    0 ADJUST DYNAMICV-POS

    1,2:MAIN SELECT3,4:SUB SELECT 9:PICTURE MENU SELECT VOL :ADJUST OK :WRITE

    0 ADJUST DYNAMICV-AMP

    1,2:MAIN SELECT3,4:SUB SELECT 9:PICTURE MENU SELECT VOL :ADJUST OK :WRITE

    0

    WB-ADJ DYNAMIC R-GAIN

    BEFORE 77 METHOD 02 COLOR TEMP NORMAL

    1,2:MAIN SELECT 3,4:SUB SELECT 7:COLOR TEMP SELECT 9:PICTURE MENU SELECT 0:WB METHOD SELECT VOL :ADJUST OK :WRITE/WB DIFF ADJ

    77 WB-ADJ DYNAMIC G-GAIN

    BEFORE 6F METHOD 02 COLOR TEMP NORMAL

    6F WB-ADJ DYNAMIC B-GAIN

    BEFORE 80 METHOD 02 COLOR TEMP NORMAL

    80 WB-ADJ DYNAMICR-CENT

    BEFORE 7E METHOD 02 COLOR TEMP NORMAL

    7EWB-ADJ DYNAMICG-CENT

    BEFORE 80 METHOD 02 COLOR TEMP NORMAL

    WB-ADJ DYNAMICB-CENT

    BEFORE 7C METHOD 02 COLOR TEMP NORMAL

    OPTION DYNAMIC Boot

    1,2:MAIN SELECT 3,4:SUB SELECT 9:PICTURE MENU SELECT VOL :ADJUST

    SD OPTION DYNAMIC STBY-SET

    1,2:MAIN SELECT 3,4:SUB SELECT 9:PICTURE MENU SELECT OK :POWER OFF

    00 OPTION DYNAMICEmergency

    1,2:MAIN SELECT3,4:SUB SELECT 9 :PICTURE MENU SELECT VOL:ADJUST

    ON OPTION DYNAMICY/C Delay

    1,2:MAIN SELECT3,4:SUB SELECT 9:PICTURE MENU SELECT VOL :ADJUST OK :WRITE

    OPTION DYNAMIC OPT 1

    1,2:MAIN SELECT 3,4:SUB SELECT 5,6:BIT SELECT 9:PICTURE MENU SELECT VOL :ADJUST OK :WRITE

    00110100 OPTION DYNAMICOPT 2

    1,2:MAIN SELECT3,4:SUB SELECT 5,6:BIT SELECT 9:PICTURE MENU SELECT VOL :ADJUST OK :WRITE

    11101110OPTION DYNAMICOPT 3

    1,2:MAIN SELECT3,4:SUB SELECT 5,6:BIT SELECT 9:PICTURE MENU SELECT VOL :ADJUST OK :WRITE

    00000001

    SRV-TOOL DYNAMIC

    1,2:MAIN SELECT 9:PICTURE MENU SELECT OK:ENTER

    00

    1

    3

    4

    2

    3 3 3

    3

    3

    3 3

    3

    3 3

    3

    3 3

    3 3

    3 3 3

    4 4

    4

    4 4

    4 4 4 4

    4 4 4 4 4 4

    4 4

    4

    80

    Key Command Press the 3/4 button to change the adjustment values or function. Press the 1/2 button to step up/down through the functions and adjustments Press the numerical button VOLUME (+/-) to change of each option item. Press the OK button after each adjustment has been made to store the required values.

    ADJUST DYNAMIC TINT 00

    Peaks SOFT 1.212 OPTION 1 34 Peaks EEP 01.03.0057 OPTION 2 ee LSI PACKAGE 2.421 OPTION 3 01 LSI DATA 1.00.08 OPTION 4 11 STBY SOFT 1.03.02 MODEL ID 09 STBY EEP 1.00.0014 03107100 STBY ROMCOR 0.00.00 00000020 ZWEI SOFT 4.100.0008 R/E Cnt 000/000 AJAX-CE 0.44.7 INV Cnt 0000 AVSW --

    ADJUST DYNAMICVCOM

    BEFORE 00

    1,2:MAIN SELECT3,4:SUB SELECT 5 :FLICKER PATTERN 9 :PICTURE MENU SELECT OK :WRITE VOL :ADJUST

    000

    3 4

    1,2:MAIN SELECT 3,4:SUB SELECT 7:COLOR TEMP SELECT 9:PICTURE MENU SELECT 0:WB METHOD SELECT VOL :ADJUST OK :WRITE/WB DIFF ADJ

    1,2:MAIN SELECT 3,4:SUB SELECT 7:COLOR TEMP SELECT 9:PICTURE MENU SELECT 0:WB METHOD SELECT VOL :ADJUST OK :WRITE/WB DIFF ADJ

    1,2:MAIN SELECT3,4:SUB SELECT 7:COLOR TEMP SELECT 9:PICTURE MENU SELECT 0:WB METHOD SELECT VOL :ADJUST OK :WRITE/WB DIFF ADJ

    1,2:MAIN SELECT3,4:SUB SELECT 7:COLOR TEMP SELECT 9:PICTURE MENU SELECT 0:WB METHOD SELECT VOL :ADJUST OK :WRITE/WB DIFF ADJ

    1,2:MAIN SELECT3,4:SUB SELECT 7:COLOR TEMP SELECT 9:PICTURE MENU SELECT 0:WB METHOD SELECT VOL :ADJUST OK :WRITE/WB DIFF ADJ

    OPTION DYNAMICOPT 4

    1,2:MAIN SELECT3,4:SUB SELECT 5,6:BIT SELECT 9:PICTURE MENU SELECT VOL :ADJUST OK :WRITE

    3

    4

    OPTION DYNAMICEDID-CLK

    HDMI 1

    1,2:MAIN SELECT3,4:SUB SELECT 7 :HDMI SELECT 9 :PICTURE MENU SELECT OK:WRITE

    00010001MID

    7C

    1 2

    1 2

    1 2

    DRV-CHECK DYNAMIC USBHDD CHECK 00

    1 2

    1,2:MAIN SELECT 9:PICTURE MENU SELECT OK 3sec:HDD CHK START

    OPTION DYNAMIC CLK MODE

    1,2:MAIN SELECT 3,4:SUB SELECT 9 :PICTURE MENU SELECT VOL:ADJUST

    O0 OPTION DYNAMICCLOCK

    1,2:MAIN SELECT3,4:SUB SELECT 9 :PICTURE MENU SELECT VOL:ADJUST

    ON 3

    4

    3

    4

    3 4

    (R) 10110100

    18

  • Service Tool Mode How to access

    1. Select [SRV-TOOL] in Service Mode. 2. Press [OK] button on the remote control.

    SRV-TOOL TD2Microcode:005a0910 Flash ROOM: AD F1 PTCT:00.00.00.00.00 Time 00051:30 On/Off 0000042

    Display of SOS History SOS History (Number of LED blinking) indication. From left side; Last SOS, before Last, three occurrence before, 2nd occurrence after shipment, 1st occurrence after shipment. This indication will be cleared by [Self/check indication and forced to factory shipment setting].

    Power ON Time, On/Off Note: To display TIME/COUNT menu, highlight position, then press MUTE for 3sec. Time: Cumulative power on time, indicated hour: minute by decimal. On/Off: Number of On/Off switching by decimal. Note: This indication will not be cleared by either of the self-checks or any other command. Exit Disconnect the AC cord from wall outlet or switch off the power with [Power] button on the main unit.

    Display of TD2Microcode version Display of Flash ROM maker code Display of SOS History POWER ON TIME/COUNT Press [MUTE] button (3sec)

    19

  • Hotel Mode 1. Purpose Restrict a function for hotels. 2. Access command to the Hotel mode setup menu. In order to display the Hotel mode setup menu, please enter the following command (within 2 second). [TV] : Vol.[Down] + [REMOTE] : AV (3 times) Then, the Hotel mode setup menu is displayed.

    3. To exit the Hotel mode menu press the EXIT button on remote control. 4. Explain the Hotel mode setup menu.

    ITEM Function Hotel Mode Select hotel mode ON/OFF Initial INPUT Select input signal modes.

    Set the input, when each time power is switched on. Selection: Off/Analog /DVB-S/DVB-C/DVB-T/AV1/AV2/PC/ HDMI1/HDMI2/HDMI3/HDMI4 *Off: give priority to the last memory. However, Euro Model is compulsorily set to TV. *AVnS/AVnC: only Euro model selectable * PC:selectable with VGA option

    Initial POS Select programme number. Selection: Off/0 to 99 *Off: give priority to the last memory

    Initial VOL Level Adjust the volume when each time power is switched on. Selection/Range: Off/0 to 100 *Off: give priority to the last memory

    Maximum VOL Level

    Adjust maximum volume. Range: 0 to 100

    Button Lock Select local key conditions. Selection: Off/SETUP/MENU/ALL *Off: altogether valid *Setup: only F-key is invalid

    (Tuning guide (menu) can not be selected.) *MENU: only F-key is invalid

    (only Volume/Mute can be selected.) *All: altogether invalid.

    Remote Lock Select remote control key conditions. Selected Off/SETUP/MENU *Off: altogether valid *Setup: only Setup menu is invalid MENU: Picture/Sound/Setup menu are invalid

    Private Information

    Select private information for VIERA Cast is Keep or Reset if Hotel mode is set to [On] when TV power on. Selection : Keep/Reset Keep: private information for VIERA Cast is keep Reset: private information for VIERA Cast is reset

    Hotel mode

    Hotel mode Off

    Initial INPUT Off

    Initial POS Off

    Initial VOL Level Off

    Maximum VOL Level 100

    Button Lock Off

    Remote Lock Off

    Private Information Keep

    Select EXIT

    RETURN

    OK

    20

  • Data Copy by SD Card Purpose a) Board replacement (Copy the data when exchanging A-board): When exchanging A-board, the data in original A-board can be copied to SD card and then copy to new A-board.

    b) Hotel (Copy the data when installing a number of units in hotel or any facility): When installing a number of units in hotel or any facility, the data in master TV can be copied to SD card and the copy to other TVs.

    Preparation Make pwd file as startup file for (a) or (b) in an empty SD card.

    1. Insert an empty SD card to your PC. 2. Right-click a blank area in a SD card window, point to New, and then click text document. A new file is created by

    default (New Text Document.txt). 3. Right-click the new text document that you just created and select rename, and then change the name and extension

    of the file to the following file name (a) or (b) and press ENTER. File name:

    (a) For Board replacement: boardreplace.pwd (b) For Hotel: hotel.pwd

    Note: Please make only one file to prevent the operation error. No any other file should be in SD card.

    TV

    A-board SD

    (Before exchanging) Copy to SD card

    (After exchanging) Copy back from SD card

    Following data can be copied. User setting data (inc. Hotel mode setting data) Channel scan data Adjustment and factory preset data

    Master TV Other TV Other TV Other TVFollowing data can be copied. User setting data (inc. Hotel mode setting data) Channel scan data

    Copy to SD card Copy from SD card SD

    21

  • Data Copy from TV set to SD Card 1. Turn on the TV set. 2. Insert SD card with a startup file (pwd file) to SD slot.

    On-screen Display will be appeared according to the startup file automatically. 3. Input a following password for (a) or (b) by using remote control.

    (a) For Board replacement: 2770 (b) For Hotel: 4850

    Data will be copied from TV set to SD card. It takes around 2 to 6 minutes maximum for copying.

    4. After the completion of copying to SD card, remove SD card from TV set. 5. Turn off the TV set.

    Note: Following new folder will be created in SD card for data from TV set.

    (a) For Board replacement: user_setup (b) For Hotel: hotel

    Data copy (Board replacement) or (Hotel)

    Input Password 2770 or 4850

    Performing

    Completion

    Performing

    Data Copy(Board replacement )

    Input password -----

    Data Copy(Board replacement )

    Input password -----

    Data Copy(Board replacement )

    Copy TV to SD card Please wait for a while

    Please do not remove the SD cardGETTING

    Data Copy(Board replacement )

    Data copy has been successful

    Please remove SD card FINISH

    22

  • Data Copy from SD Card to TV set 1. Turn on the TV set. 2. Insert SD card with Data to SD slot.

    On-screen Display will be appeared according to the Data folder automatically. 3. Input a following password for (a) or (b) by using remote control.

    (a) For Board replacement: 2771 (b) For Hotel: 4851

    Data will be copied from SD card to TV set. 4. After the completion of copying to SD card, remove SD card from TV set.

    (a) For Board replacement: Data will be deleted after copying (Limited one copy). (b) For Hotel: Data will not be deleted and can be used for other TVs.

    5. Turn off the TV set. Note:

    1. Depending on the failure of boards, function of Data for board replacement does not work. 2. This function can be effective among the same model numbers.

    Input Password

    Performing

    Input Password 2771 or 4851

    Performing

    Completion

    Performing

    Data Copy(Board replacement )

    Input password -----

    Data Copy(Board replacement )

    Copy SD card to TV Please wait for a while

    Please do not remove the SD cardWRITING

    Data Copy(Board replacement )

    Data copy has been successful

    Please remove SD card FINISH

    23

  • Option Bytes Description OPTION1

    b1 TEXT Ch Refresh ON (1) / OFF (0) b2 ID-1 ON (1) / OFF (0) b3 Macrovision Auto-judge ON (1) / OFF (0) b4 Surround enable low bit ON (1) / OFF (0) b5 Surround enable high bit ON (1) / OFF (0) b6 Enable HDMI force reset ON (1) / OFF (0)

    b7 TINT_Component_HDMI ON (1) / OFF (0) OPTION2

    b0 Adjust gain enable ON (1) / OFF (0) b1 A2 BG enable (5.5MHz) ON (1) / OFF (0) b2 A2 DK1 enable (6.26MHz) ON (1) / OFF (0) b3 A2 DK3 enable (5.742MHz) ON (1) / OFF (0) b4 NICAM scan ON (1) / OFF (0) b5 NICAM BG enable (5.5MHz) ON (1) / OFF (0) b6 NICAM I enable (6.0MHz) ON (1) / OFF (0)

    b7 NICAM DK enable (6.5MHz) ON (1) / OFF (0) OPTION3

    b0 NICAM priority ON (1) / OFF (0) b1 Starhub scan enable (Singapore) ON (1) / OFF (0)

    b2 Enable special edge smoother function (CHINA) ON (1) / OFF (0)

    b3 A2 DK2 enable ON (1) / OFF (0)

    b4 Inhibition of countermeasure for SIF signal drop ON (1) / OFF (0)

    b5 Get onid from physical CH (CHINA) ON (1) / OFF (0)

    b6 SSU search enable for HOTEL model ON (1) / OFF (0)

    b7 SASO mute (ASIA) ON (1) / OFF (0) OPTION4 b0 enable Video Distortion Countermeasure for Analog VIF.

    ON (0) / OFF (1)

    b2 3DYC color motion detect ON (1) / OFF (0) b3 RF Clamp Current minimum (TAIWAN)

    ON (1) / OFF (0)

    b4 SHOP banner enable ON (1) / OFF (0) b6 PIP ON (1) / OFF (0) b7 Enable workaround for Polsat CAM problem (POLAND)

    ON (1) / OFF (0)

    24

  • Adjustment Method Sub-Contrast/White Balance Adjustment

    Instrument Name Connect to Remarks 1. Remote controller 2. LCD WB meter (Minolta CA-210 or equivalent) 3. Comunication jig 4. Computer for external control

    Correlation can be also taken by CS-1000A or equivalent

    Procedure Remarks Subcontrast adjustment 1. Receive PAL colour bar (100% white) RF signal. 2. Enter Contrast adj. In SERVICE mode. 3. Start adjusting by using Yellow Key. 4. If the adjustment finished normally, the letter of Contrast will change from red

    to black. White Balance adjustment 1. Procedure basically performs checking using the production software and

    make automatic adjustment using external computer. 2. It adjusts in the mode of: Colour balance Normal Viewing Mode Dynamic Normal Highlight x: 0.307 0.010 y: 0.322 0.010 Normal Lowlight x: 0.307 0.010 y: 0.322 0.010

    Let the panel standfor more than 3 hours at more than 20 C. Basically perform adjustment in the ambient environment of room temperature more than 20 C. The aging time is more than20 min at above room temperature. Applied signal 100% full colour bar 0.7V p-p white peak 85% modulation 100% WHITE 50% GRAY

    25

  • CI S

    LOT

    JK10

    70

    BT

    A21

    WIF

    I

    A20

    HD

    MI2

    JK47

    01D

    HD

    MI1

    JK47

    00D

    HD

    MI4

    JK47

    03D

    HD

    MI3

    JK47

    02D

    SER

    VIC

    EC

    ON

    NEC

    TOR

    CN

    0100

    SD S

    LOT

    CN

    8660

    PC

    JK30

    05

    A-BO

    ARD

    AV1

    scar

    t

    JK30

    03JK

    8600

    ETH

    ERN

    ET

    TU67

    02A

    12A

    SPEA

    KER

    SW

    OO

    FER

    A10

    K-BO

    ARD

    REM

    OTE

    UNIT

    K10

    LP-B

    OAR

    D

    LP10

    RM

    10

    A02

    D30

    06

    DIG

    ITA

    L A

    UD

    IO O

    UT

    LCD PANEL

    A15

    HP

    JK30

    51

    JK30

    01

    AV2

    YUV,

    V IN

    ,A

    UD

    IO IN

    Side

    Ter

    min

    alB

    otto

    m T

    erm

    inal

    TUN

    ER

    JK84

    50U

    SB1

    JK84

    51U

    SB3

    JK84

    52U

    SB2

    Wiring Diagram

    P-UN

    ITLD

    -BO

    ARD

    P2

    CN

    001 MA

    IN IN

    P4

    CN

    700

    CN

    100

    LD3

    LD1

    LD2

    LD4

    26

  • Block Diagram (1/2)

    IC8000[MN2WS0250E]

    LDA4

    Audio Output

    Video Input

    Audio Input

    Video Output

    JK30

    03

    AV1_VIN 11

    AV1_VOUT 2

    AV1_RED/C 18AV1_GREEN 15

    AV1_BLUE 13

    AV1_LIN 7AV1_LOUT 5

    AV1_RIN 8

    AV1_ROUT 4

    AV1

    AA11

    AE12 AE13 AD13

    V1

    R3

    G3B3

    JK30

    05

    PC

    1

    2

    3

    PC-R

    PC-G

    PC-B

    AD11 AE11 AF11

    R2

    G2B2

    AE9 AE10 AD10

    R1

    G1

    B1

    V1

    R3G3B3

    R2

    G2

    B2

    Y

    PB

    PR

    L

    R

    L

    Y/V

    in,P

    B,P

    R

    JK30

    01

    AU

    DIO

    IN

    LIN3_LPLR LIN3_RP

    R1

    G1

    B1

    R2

    G2

    B2R1G1B1

    VOUT

    VOUT AC11Q3051 Q3052

    Q3053

    LIN1_RPLIN1_LP

    LIN1_RPLIN1_LP

    LIN1_RPLIN1_LP

    AA5 AA4

    LIN3_RP

    LIN3_LPLIN3_RP

    LIN3_LP AD4

    AF5

    HP1_L

    JK30

    51

    HP1_R

    HP-

    OU

    T

    AD7 AF8

    LO2_L

    LO2_RIC3052Audio Amp1 2

    67LO2_L

    LO2_R

    LO2_LLO2_R

    AE6

    AD6

    HP1_L

    HP1_RHP1_LHP1_R

    Dig

    ital

    Aud

    io O

    ut D

    3006

    V7IECOUT

    AB23ARCOUTIECOUT

    IECOUT

    SUB3.3V

    JK47

    00D

    HD

    MI1

    HPD2

    5VDET2DDCSDA2

    DDCSCL2

    CEC

    RX2

    JK47

    01D

    HD

    MI2

    HPD15VDET1DDCSDA1

    DDCSCL1

    CEC

    RX1

    JK47

    02D

    HD

    MI3

    HPD05VDET0

    DDCSDA4

    DDCSCL4

    CEC

    RX2

    JK47

    03D

    HD

    MI4

    HPD3

    5VDET3DDCSDA3

    DDCSCL3

    CEC

    RX1

    IC4700HDMI SWITCH

    (C1AB00003469)

    RX2

    RX1

    DDCSDA4

    DDCSCL4

    DDCSDA3

    DDCSCL3

    53,54,56,57 59,60,62,63

    51

    52

    38,39,41,42 44,45,47,48

    36

    37

    17,18,20,21 23,24,26,27

    HDMI I/F

    RX2

    RX1

    RX0

    RX0

    DDCSDA0

    DDCSCL0

    30

    29

    ARCOUT

    STM

    DD

    CSD

    A0

    DD

    CSC

    L0

    HPD

    2

    HPD

    1

    HPD

    0

    HPD

    3

    5VD

    ET2

    5VD

    ET1

    5VD

    ET0

    5VD

    ET3

    DD

    CSD

    A0

    DD

    CSC

    L0

    DD

    CSD

    A1

    DD

    CSC

    L1D

    DC

    SDA

    2

    DD

    CSC

    L2

    DD

    CSD

    A3

    DD

    CSC

    L3

    DD

    CSD

    A4

    DD

    CSC

    L4

    CEC

    HDMI I/F

    HDMI_SW3.3V 6,12,19,25 40,46,55,61

    JK8450USB2

    IC84

    53

    SW

    6 1

    3 4

    USB

    5VU

    SB2V

    BU

    S

    USB

    2OD

    USB

    2DP

    USB

    2DN

    JK8451USB1

    IC84

    54

    SW

    6 1

    3 4

    USB

    5VU

    SB1V

    BU

    S

    USB

    1OD

    USB

    1DP

    USB

    1DN

    JK8452USB0

    IC84

    55

    SW

    6 1

    3 4

    USB

    5VPW

    R

    OVR DD

    -

    DD

    +

    A20WiFi

    IC84

    57

    SW

    6 1

    3 4

    USB

    5VPW

    R

    OVR DD

    -

    DD

    +

    IC8458USB HUB

    31 30 17 18 43 42 5 6

    SUB

    3.3V

    1,7,12,16,19,25,34,37,38,44

    3 4

    USB

    0DP

    USB

    0DN

    USB I/F

    USB

    2VB

    US

    USB

    2OD

    USB

    1VB

    US

    USB

    1OD

    USB POWER CTRL

    P24

    P25

    ETHERNET

    JK8600

    9T8600

    1 2 3 6

    11 14 16

    8 6 3 1

    TX+

    TX-

    RX+

    RX-

    IC8600[C1CB00003736]

    LAN CONTROLER

    6 5 4 3

    RMII_RXD0,RXD1RMII_TXD0,TXD1RMII_REFCLK,TXEN, CRS_DV,RXERMDIO,MDC,INTL,PHYRSTL

    SUB

    3.3V

    7,14,30 31 32

    X860

    0

    TX+

    TX-

    RX+

    RX-

    LA

    N C

    ON

    I/F

    CI SLOTJK1070

    17,18 51,52

    SU

    B_C

    I_5V

    CN8660SD SLOT

    SUB

    3.3V

    TS-

    OU

    T

    TS-

    IN

    TS

    Para

    llel o

    utpu

    t

    TS

    Para

    llel i

    nput

    HSBCLKOUTHSSYNCOUTHSVALOUTHSDOUT[0;7]

    HS0BCLKINHS0SYNCINHS0VALINHS0DIN[0;7]

    SYS

    TEM

    BU

    S

    CI I

    /F

    SD

    DAT

    A S

    D C

    AR

    D I/

    F

    CN0100

    SERVICE

    SUB

    5V

    IC8200DDR3

    SUB

    1.5V

    IC8201DDR3

    SUB

    1.5V

    DDR3 I/F

    IC8900NAND FLASH

    SUB

    3.3V

    NA

    ND

    FLA

    SH I/

    F

    IC8902EEPROM LDA4

    SUB

    3.3V

    EEP_

    WP

    BE

    I2C

    A23

    A12

    A

    IC4900[C1AB00003871]

    AUDIO AMP

    32 1 2 3

    1 2 3 4

    17,18,23,24,31

    11,12 14,15 26,27 29,30

    L- L+ R+ R-

    K6 L6 L7 M7

    AUDIO OUT

    16V

    DMD_ IIC1

    SOU

    ND

    _SO

    S

    STMAD19

    IC5000[AN34043AAVF]ANALOG ASIC

    1 6 2 14 30 31

    STB

    5V

    STB

    5V

    SU

    B5V

    SU

    B9V

    STB

    1.1V

    28 12

    32

    STB

    3.3V

    HP

    _MU

    TE

    23

    Q4971 Q4972HP_MUTE

    HP

    _MU

    TE

    PEA

    KSR

    ST

    PEA

    KSR

    ST

    STB

    _XR

    ST

    STB

    _XR

    ST

    AC

    13

    BL_

    PWM

    A

    3

    PWM

    _A_I

    N F

    5

    3 7

    9-10 12A02

    TO P24 69 131,3,

    516

    V

    TV_S

    UB

    _ON

    STB

    5.8V

    2

    BL_

    ON

    BL_

    SOS

    KEY

    1

    15

    TV_S

    UB

    _ON

    AD

    17

    KEY

    1

    BL_

    SOS

    BL_

    ON

    REM

    OTE

    R_L

    ED

    G_L

    ED

    STB

    3.3V

    A10 11 9 10 7 6 5,10 3

    AI

    4

    SUB

    3.3V

    9

    R2003

    SUB_AI_3.3V

    REM

    OTE

    G_L

    EDR

    _LED A

    I

    TO K10 / LP10 / RM10

    SUB3.3V

    15

    SUB

    _AI_

    3.3V

    OVP SOS

    SUB

    3.3V

    USB

    5V

    SUB

    5V

    TU_1

    .2V

    SUB

    1.1V

    SUB

    1.5V

    IC5300REG

    4 9

    16V

    PNL12V

    IC5400REG

    2 3

    16V SUB3.3V

    IC5420REG

    23

    16V

    SUB5V

    IC5440REG

    27,8

    16V

    USB5V

    86

    16V

    SUB1.1V

    86

    16V

    SUB1.5V

    R4076

    TCON2.5V

    SUB3.3V

    IC8702REG 3

    4,2 SUB3.3V

    SUB1.8V

    IC8404REG 1

    5 SUB5V

    SUB_CI_5V

    IC8706REG 4,1

    5 SUB5V

    HDMI_SW3.3V

    HDMI3.3V

    A15

    RX0AN,P; RX0BN,P RX0CN,P; RX0CLKN,P

    RX0DN,P; RX0EN,P

    RX1AN,P; RX1BN,P RX1CN,P; RX1CLKN,P

    RX1DN,P;RX1EN,P

    19,20,21,22,24,25,27,28

    29,30,31,32

    34,35,36,3739,40,42,43

    44,45,46,47

    LVDS I/F

    PNL12V 1-9

    54,55

    BE I2C SDA,SCL

    SER

    VIC

    E

    59

    57

    56

    SD

    A,S

    CL

    TO P

    AN

    EL

    VJ8660

    VDDSD18V33V

    SUB3.3V

    R8637

    WOL3.3V

    SUB3.3V

    STB3.3VSTB1.1VSUB1.1VSUB1.8VSUB1.5VSUB3.3V

    TCON2.5V VDDSD18V33V

    WOL3.3VHDMI3.3V

    A-BOARD[EXCHANGE UNIT]

    SER

    VIC

    E

    POW

    ER_O

    N

    POW

    ER_O

    N

    1 2 3 1 2 3 1 2 3 1 2 3

    IC8100Step_down

    CONVERTER

    IC8101Step_down

    CONVERTER

    L6707

    SI_3.3V

    SUB3.3V

    22

    5 6

    IC4901[C1AB00003871]

    AUDIO AMP

    32 1 2 3

    17,18,31

    11,12 14,15

    16V

    N5BE COMMON I/O

    Wo- Wo+

    SP_L SP_R Woofer

    BT_LR

    PWM

    _EN

    B

    5

    PWM

    _EN

    B

    49 LOGO_ON

    LOG

    O_O

    N Y

    17

    A21 11 2 1 3 5

    BT_LR

    SUB

    3.3V

    9 10

    BT_

    USB

    DN

    BT_

    USB

    DP

    BLUETOOTH

    83D

    _ON

    3D_O

    N D

    5

    14B

    L_EC

    O

    IC5780REG

    23

    16V

    TU_1.2V

    IC5720REG

    15

    SUB3.3V

    TUN

    ER D

    VB-T

    /T2/

    C/S

    AT

    TU67

    02

    SI_3.3VSUB1.8V

    12,13,14,2

    SDA/SCL 7,8

    DMD_ IIC1

    16V

    22

    FE_XRST 6

    20

    FE_XRST

    IC6851[C1AB00003807]

    LNB

    DMD_IIC0

    FE_XRST

    K7

    IFAGC1 9 IFAGC1

    DM

    D_

    IIC1

    DM

    D_I

    IC0

    TUNER I2C

    IFAGC1

    IF1_P,N 10,11 IF1_P,N

    U5

    IF1_P,N EA2, AF2

    Parallel TS

    BE

    CO

    MM

    ON

    I/O

    SDA/SCL 15,16DMD_IIC1

    TU_1.2V2018

    33

    8,7

    LNB_PWR

    32 DISEQC_IIC1

    21-311

    W7

    FE_OSC_ENB

    FE_1.2V/2.5V

    FE_1.2V/2.5V

    16V16

    V

    SUB

    9V

    8

    DISPENPWM_ENB

    PWM

    _EN

    B

    DIS

    PEN

    IC2002Operational

    AMP

    5

    SUB3.3V

    4

    LP_FB

    LP_F

    B 1

    2LP

    _5V

    13

    38,37

    DMD_ IIC1

    TU_1.2V

    SUB3.3V

    4829FE_XRST

    IFAGC2

    T2FEAIN_P,N

    IC6900[C1AB00003808] DVB-T/T2/C DEM

    Parallel TS 3,4,5,8,9,1213,14,15,16,17 34 35

    X6900

    3 IFAGC24,5 IF2P/N

    27

  • Block Diagram (2/2)

    K-BOARD

    K10

    4567

    3

    STBY 3.3V

    SUB3.3V

    SN2800AI

    3

    1

    VCC

    OUT

    D2800R G

    AI

    G LED

    R LEDSUB3.3V

    AI

    STBY 3.3V

    R LED

    G LED

    LP-BOARD

    TO A

    10 LP10

    21

    TO A

    10

    D2880 D2881 D2882 D2883

    LD-BOARD

    IC9500LED DRIVER

    (C1ZBZ0004571)

    LD2

    357

    2,46,8

    10,1214,16

    1

    TO P

    AN

    EL

    111315

    9

    LD4

    257

    1

    TO P

    4

    109

    VLED

    VLED

    16V

    2,3

    FB

    BL-ONBL-SOS

    61 160

    LED-K8

    LED-K7

    LED-K6

    LED-K5

    LED-K4

    LED-K3

    LED-K2

    LD1

    357

    2,46,8

    10,1214,16

    TO P

    AN

    EL

    111315

    9

    17 LED-K1

    28

    25

    22

    18

    14

    11

    8

    5

    LED-K16

    LED-K15

    LED-K14

    LED-K13

    LED-K12

    LED-K11

    LED-K10

    LED-K9

    5552494642383532LD3

    1-857

    TO P

    AN

    EL

    111320

    9

    64-71PWMRST

    72

    77

    76

    75

    74

    PWM_CLK

    SEL

    SDI

    SCK

    LOAD

    78 DVDD

    28

  • Parts Location

    NOTE: The numbers on the exploded view below refer to the exploded view section of the Replacement Parts List.

    31

    27

    7

    29

    33

    11

    1

    26

    13

    4

    6

    12

    47 + 42 TEWF383

    47 + 42 TEWF383

    47 + 42 TEWF387

    47 + 42 TEWF386

    47 + 42 TEWF385

    47 + 42 TEWB890

    47 + 42 TMK0EG081

    47 + 42 TMK0EG079

    (UK)

    (CONTINENTAL)

    29

  • Parts Location

    NOTE: The numbers on the exploded view below refer to the exploded view section of the Replacement Parts List.

    3037 38 25

    3532

    2

    36

    18 34 15

    19

    20

    14

    2

    28

    8 9

    3

    5

    10

    162317

    21

    22

    24

    30

  • Components Identified by mark have special characteristics important for safety.* When replacing any of these components, use only manufacturers specified parts.

    In case of ordering these spare parts, please always add the complete Model-Type number to your order.

    Replacement Parts ListImportant Safety Notice

    The marking (RTL) indicates that the Retention Time is Limited for this item. After the discontinuation of this assembly in production, the item will continue to be available for a specific period of time. The retention period of availability is dependent on the type of assembly, and in accordance with the laws governing part and product retention. After the end of this period, the assembly will no longer be available.

    RTL (Retention Time Limited)Note:

    X The marking (X) indicates that board should be exchanged for service.

    DescriptionCct Ref Parts Number DescriptionCct Ref Parts Number

    COMMON PARTS

    EXPLODED VIEWBATTERY COVER OF RC 1 BAT-C-0715SPEAKER_SQ 2 EAK1H05ATUNER DVB-T/T2/C/S/S2 3 J3ACAZC00004SCART CABLE 4 K1HY20YY0011CI SLOT GUIDE 5 K1YB02000002AV CABLE 6 K2KYYYY00206REMOTE CONTROL 7 N2QAYB000715WIFI DONGLE 8 N5HBZ0000061BT DONGLE 9 N5HZZ0000110IR RECEIVER 10 N5ZZ00000263STAND ACC ASSY 11 TBL5ZX0229STAND METAL COVER ASSY 12 TBL5ZX0236COVER LABEL 13 TBM4GU113KEY BUTTON 14 TBX5ZA01001CONNECTOR BRACKET_BT 15 TKK5ZL50061ABOTTOM COVER_C 16 TKP5ZA20501IR-RECEIVER COVER 17 TKP5ZA20801METAL BRACKET BOTTOM 18 TKZ5ZC50011METAL AV BRACKET_SIDE 19 TKZ5ZF50032METAL AV BRACKET_BOTTO 20 TKZ5ZF50077K P.C.B. 21 TNPA5605ACLD P.C.B. 22 TNPA5615AALP P.C.B. 23 TNPA5645AABOTTOM COVER L ASSY 24 TTP5ZA0005

    MISCELLANEOUS COMPONENTSBATTERY . R6DB/2PSIDE AV LABEL . TBM0E00521CI LABEL . TBM0E00601SIDE BUTTON LABEL. TBM0E04341GASKET_10X7X2 . TEWB386GASKET (T5*W7*L3). TEWB477GASKET ON HDMI TERMINA. TEWB489GASKET_8X10X20 . TEWB625GASKET (T0,5*W5*L160). TEWB882GASKET (T0.5*W5*L205). TEWB883GASKET (T5* W5*L10). TEWB887GASKET (T0.5*W5*L35). TEWB888GASKET (T0.18*W13*L25). TEWB890TAPE (T0.18*W13*L220). TEWF383TAPE (T0.18*W13*L25). TEWF385TAPE (T0.18*W13*L160). TEWF386TAPE (T0.18*W13*L80). TEWF387

    BOLT M8X15 . THEA238NSCREW . THEC1509SCREW . THEJ024SCREW . THEJ036JM8 CAP . TKKL55351SPONGE (70X15XT2). TMK0EG076SPONGE (65X15XT4). TMK0EG077SPONGE (100X50XT2). TMK0EG079SPONGE (50X20XT20). TMK0EG080SPONGE (60X10XT2). TMK0EG081THERMAL CONDUC SHEET. TMKK484THERMAL CONDUC SHEET. TMKK491CLAMPER . TMME289CLAMPER . TMME414CLAMPER . TMME422BAG . TPE0E9008SCREW . XSS5+15FNKSCREW . XTV3+16JFJSCREW . XYN4+F10FJK

    I.C.sOPERATIONAL AMPLIFIERIC2002 C0ABGA000035AUDIO AMPLIFIER IC3052 C0ABBB000179HDMI SWITCH IC4700 C1AB00003469AUDIO AMPLIFIER IC4900 C1AB00003871AUDIO AMPLIFIER IC4901 C1AB00003871ANALOG ASIC IC5000 AN34043AAVFCONTROLLER IC IC5300 C0DBZYY00544REGULATOR IC5400 C0DBAYY01299REGULATOR IC5420 C0DBAYY01299STEP DOWN CONVERTERIC5440 C0DBAYY01283REGULATOR IC5720 C0DBGFD00102REGULATOR IC5780 C0DBAYY01300LNB SUPPLY AND CONTROLIC6851 C1AB00003807COMBINED DEMODULATORIC6900 C1AB00003808PEAKS LDA4 IC8000 MN2WS0250ESTEP DOWN CONVERTERIC8100 C0DBAYY01283STEP DOWN CONVERTERIC8101 C0DBAYY01285DDR SDRAM IC8200 C3ABUY000022DDR SDRAM IC8201 C3ABUY000022POWER SWITCH IC IC8404 C0DBZYY00382SWITCH IC IC8453 C0DBZYY00541SWITCH IC IC8454 C0DBZYY00541SWITCH IC IC8455 C0DBZYY00541SWITCH IC IC8457 C0DBZYY00541USB HUB IC8458 C1CB00003747LAN CONTROLER IC8600 C1CB00003736REGULATOR IC8660 C0DBEYY00102REGULATOR IC8702 C0DBEYY00102

    57/

    57/

    57/

    31

  • DescriptionCct Ref Parts Number DescriptionCct Ref Parts NumberREGULATOR IC8706 C0DBGYY01682FLASH MEMORY IC8900 TVRS835ADLED DRIVER IC9500 C1ZBZ0004571AI SENSOR IC SN2800 B3JB00000116

    DIODESDIODE D2000 DB2J30900LDIODE D2011 DB2J30900LLED DIODE D2800 B3AGB0000065DIODE D2880 B3AFB0000471DIODE D2881 B3AFB0000471DIODE D2882 B3AFB0000471DIODE D2883 B3AFB0000471ESD SUPPRESSOR D2884 EZAEG2A50AXZENER DIODE D3100 DZ2J140M0LZENER DIODE D3101 DZ2J140M0LZENER DIODE D3102 DZ2J140M0LZENER DIODE D3103 DZ2J140M0LZENER DIODE D3104 DZ2J140M0LZENER DIODE D3105 DZ2J140M0LDIODE D3130 DB2J30900LDIODE D4702 DA2J10100LDIODE D4704 DB2J30900LDIODE D4719 DA2J10100LDIODE D4735 DA2J10100LDIODE D4770 DA2J10100LDIODE D4785 DB2J30900LDIODE D5172 DZ2J220M0LDIODE D5173 DA2J10100LZENER DIODE D5178 DZ2J068M0LDIODE D5179 B0ADCK000001ZENER DIODE D5180 DZ2J033M0LZENER DIODE D5187 DZ2J047M0LDIODE D5188 B0ADCK000001DIODE D5191 B0ADCK000001DIODE D6700 B0ECKP000002DIODE D6851 B0JCMD000060DIODE D6852 B0ECKP000002DIODE D6853 B0JCME000093ZENER DIODE D6854 B0BC4R700007ZENER DIODE D6856 B0BC4R700007DIODE D8716 B0ECKM000053DIODE D8850 DB2J30900LDIODE D9501 DZ2J360M0LDIODE D9502 DZ2J360M0LDIODE D9503 DZ2J360M0LDIODE D9504 DZ2J360M0LDIODE D9505 DZ2J360M0LDIODE D9506 DZ2J360M0LDIODE D9507 DZ2J360M0LDIODE D9508 DZ2J360M0LDIODE D9509 DZ2J360M0LDIODE D9510 DZ2J360M0LDIODE D9511 DZ2J360M0LDIODE D9512 DZ2J360M0LDIODE D9513 DZ2J360M0LDIODE D9514 DZ2J360M0LDIODE D9515 DZ2J360M0LDIODE D9516 DZ2J360M0L

    TRANSISTORSTRANSISTOR Q2001 B1ADCF000194TRANSISTOR Q2006 B1ABCE000015TRANSISTOR Q2011 B1ABCE000015TRANSISTOR Q2012 B1ABCE000015TRANSISTOR Q2013 B1ABCE000015TRANSISTOR Q2014 B1ABCE000015TRANSISTOR Q2015 DRA2113Z0LTRANSISTOR Q3051 B1HFCEA00001

    TRANSISTOR Q3052 B1HFCEA00001TRANSISTOR Q3053 B1ADCE000022TRANSISTOR Q3102 B1ABCE000015TRANSISTOR Q3103 B1ABCE000015TRANSISTOR Q4000 B1ABCE000015TRANSISTOR Q4700 B1ABCF000231TRANSISTOR Q4702 B1ABCF000231TRANSISTOR Q4704 B1ABCF000231TRANSISTOR Q4709 B1ABCF000231TRANSISTOR Q4971 B1ABKE000001TRANSISTOR Q4972 B1ABKE000001TRANSISTOR Q4981 B1ABCE000015TRANSISTOR Q5301 B1CFRD000100TRANSISTOR Q5302 B1CFRD000100TRANSISTOR Q9501 B1CFRL000020TRANSISTOR Q9502 B1CFRL000020TRANSISTOR Q9503 B1CFRL000020TRANSISTOR Q9504 B1CFRL000020TRANSISTOR Q9505 B1CFRL000020TRANSISTOR Q9506 B1CFRL000020TRANSISTOR Q9507 B1CFRL000020TRANSISTOR Q9508 B1CFRL000020TRANSISTOR Q9509 B1CFRL000020TRANSISTOR Q9510 B1CFRL000020TRANSISTOR Q9511 B1CFRL000020TRANSISTOR Q9512 B1CFRL000020TRANSISTOR Q9513 B1CFRL000020TRANSISTOR Q9514 B1CFRL000020TRANSISTOR Q9515 B1CFRL000020TRANSISTOR Q9516 B1CFRL000020

    TRANSFORMERSTRANSFORMER T8600 G5BYC0000040

    COILSCOIL BLM18PG121SN1DL2300 J0JHC0000045COIL L3102 J0JYC0000156COIL L3103 J0JYC0000156COIL L3108 J0JYC0000156COIL L3111 J0JYC0000156COIL L3112 J0JYC0000156COIL L3113 J0JYC0000156COIL L3116 J0JYC0000156COIL L3119 J0JYC0000156COIL L3120 J0JYC0000156COIL L4901 G1C100MA0533COIL L4902 G1C100MA0533COIL L4903 G1C100MA0533COIL L4904 G1C100MA0533COIL L4905 G1C150MA0533COIL L4906 G1C150MA0533COIL L5300 G1C3R3ZA0248COIL L5400 G1C4R7ZA0311COIL L5420 G1C6R8MA0533COIL L5440 G1C3R3ZA0311COIL L5780 G1C4R7ZA0311COIL L6701 J0JGC0000020COIL L6702 J0JGC0000020COIL L6704 J0JGC0000020COIL L6706 J0JGC0000020COIL L6707 J0JYC0000070COIL L6708 J0JHC0000116COIL L6711 J0JHC0000046COIL L6721 J0JYC0000156COIL L6851 G1C100MA0533COIL L6900 J0JGC0000020COIL L6901 J0JGC0000020COIL L8001 J0JCC0000287COIL L8002 J0JYC0000464

    32

  • DescriptionCct Ref Parts Number DescriptionCct Ref Parts NumberCOIL L8003 J0JKC0000021COIL L8004 J0JCC0000287COIL L8005 J0JYC0000464COIL L8006 J0JYC0000464COIL L8100 G1C1R5ZA0311COIL L8101 G1C2R2ZA0311COIL BLM18PG121SN1DL8461 J0JHC0000045COIL BLM18PG121SN1DL8462 J0JHC0000045COIL BLM18PG121SN1DL8464 J0JHC0000045COIL L8466 J0JYC0000464COIL BLM18PG121SN1DL8467 J0JHC0000045FILTER L8660 J0JBC0000115COIL BLM18PG121SN1DL8662 J0JHC0000045COIL L8663 J0JYC0000014COIL L8664 J0JYC0000014

    FILTERSFILTER FL4000 J0ZZB0000147FILTER FL4001 J0ZZB0000147FILTER FL4002 J0ZZB0000147FILTER FL4003 J0ZZB0000147FILTER FL4004 J0ZZB0000147FILTER FL4005 J0ZZB0000147FILTER L8451 J0ZZB0000142FILTER L8453 J0ZZB0000142FILTER L8455 J0ZZB0000142FILTER L8459 J0ZZB0000142FILTER L8463 J0ZZB0000142

    CRYSTALSCRYSTAL X6900 H0J410500002CRYSTAL X8300 H0J245500110CRYSTAL X8450 H0J120500062CRYSTAL X8600 H0J250500120

    RESISTORSSMDJS0033 D0GAR00J0005 .063W 5% 0 SMDJS0055 D0GAR00J0005 .063W 5% 0 SMDR0900 D0GA220JA023 .063W 5% 22 SMDR0901 D0GA220JA023 .063W 5% 22 SMDR0903 D0GA272JA023 .063W 5% 2K7 SMDR0904 D0GA473JA023 .063W 5% 47K SMDR0905 D0GA101JA023 .063W 5% 100 SMDR0906 D0GA101JA023 .063W 5% 100 SMDR0907 D0GA101JA023 .063W 5% 100 SMDR0910 D0GA332JA023 .063W 5% 3K3 SMDR0911 D0GA272JA023 .063W 5% 2K7 SMDR0912 D0GA272JA023 .063W 5% 2K7 SMDR0913 D0GA332JA023 .063W 5% 3K3 SMDR0914 D0GA101JA023 .063W 5% 100 SMDR0916 D0GA220JA023 .063W 5% 22 SMDR0917 D0GA220JA023 .063W 5% 22 SMDR0918 D0GA220JA023 .063W 5% 22 SMDR0919 D0GA220JA023 .063W 5% 22 SMDR0924 D0GA220JA023 .063W 5% 22 SMDR0925 D0GA220JA023 .063W 5% 22 SMDR0926 D0GA220JA023 .063W 5% 22 SMDR0927 D0GA220JA023 .063W 5% 22 SMDR0928 D0GA220JA023 .063W 5% 22 SMDR0929 D0GA220JA023 .063W 5% 22 SMDR0932 D0GA220JA023 .063W 5% 22 SMDR0933 D0GA220JA023 .063W 5% 22 SMDR0938 D0GA101JA023 .063W 5% 100 SMDR0940 D0GA101JA023 .063W 5% 100 SMDR0946 D0GA101JA023 .063W 5% 100 SMDR0948 D0GA101JA023 .063W 5% 100 SMDR0951 D0GA101JA023 .063W 5% 100 SMDR0952 D0GA102JA023 .063W 5% 1K SMDR0953 D0GA272JA023 .063W 5% 2K7

    SMDR0954 D0GA272JA023 .063W 5% 2K7 SMDR0955 D0GA272JA023 .063W 5% 2K7 SMDR0956 D0GA332JA023 .063W 5% 3K3 SMDR0957 D0GA332JA023 .063W 5% 3K3 SMDR1951 D0GA680JA023 .063W 5% 68 SMDR1953 D0GA103JA023 .063W 5% 10K SMDR2000 D0GA563JA023 .063W 5% 56K SMDR2003 D0GAR00J0005 .063W 5% 0 SMDR2008 D0GA473JA023 .063W 5% 47K SMDR2009 D0GA102JA023 .063W 5% 1K SMDR2011 D0GA223JA023 .063W 5% 22K SMDR2012 D0GA471JA023 .063W 5% 470 SMDR2013 D0GA101JA023 .063W 5% 100 SMDR2014 D0GA101JA023 .063W 5% 100 SMDR2015 D0GA224JA023 .063W 5% 220K SMDR2016 D0GA122JA023 .063W 5% 1K2 SMDR2019 D0GF101JA048 0.25W 5% 100 SMDR2022 D0GAR00J0005 .063W 5% 0 SMDR2034 D0GAR00J0005 .063W 5% 0 SMDR2035 D0GA104JA023 .063W 5% 100K SMDR2036 D0GD101JA052 .125W 5% 100 SMDR2037 D0GA102JA023 .063W 5% 1K SMDR2039 D0GA103JA023 .063W 5% 10K SMDR2051 D0GA101JA023 .063W 5% 100 SMDR2053 D0GA473JA023 .063W 5% 47K SMDR2054 D0GA104JA023 .063W 5% 100K SMDR2055 D0GA103JA023 .063W 5% 10K SMDR2058 D0GA473JA023 .063W 5% 47K SMDR2059 D0GA103JA023 .063W 5% 10K SMDR2060 D0GA473JA023 .063W 5% 47K SMDR2061 D0GA223JA023 .063W 5% 22K SMDR2063 D0GA101JA023 .063W 5% 100 SMDR2066 D0GAR00J0005 .063W 5% 0 SMDR2068 D0GA103JA023 .063W 5% 10K SMDR2069 D0GA103JA023 .063W 5% 10K SMDR2070 D0GA103JA023 .063W 5% 10K SMDR2800 D1BA9530A014 .063W 1% 953 SMDR2805 D1BA2261A023 .063W 1% 2K26 SMDR2807 D0GAR00J0005 .063W 5% 0 SMDR2809 D0GAR00J0005 .063W 5% 0 SMDR2884 D0GAR00J0005 .063W 5% 0 SMDR3061 D0GA221JA023 .063W 5% 220 SMDR3062 D0GA103JA023 .063W 5% 10K SMDR3063 D0GA103JA023 .063W 5% 10K SMDR3064 D0GA102JA023 .063W 5% 1K SMDR3065 D0GA112JA015 .063W 5% 1K1 SMDR3066 D1BA1501A023 .063W 1% 1K5 SMDR3067 D1BA1501A023 .063W 1% 1K5 SMDR3101 D0GA472JA023 .063W 5% 4K7 SMDR3102 D0GA472JA023 .063W 5% 4K7 SMDR3103 D0GD750JA052 .125W 5% 75 SMDR3104 D0GD750JA052 .125W 5% 75 SMDR3105 D0GD750JA052 .125W 5% 75 SMDR3121 D0GB104ZA041 0.1W 5% 100K SMDR3123 D1HY2204A012 .063W 5% 22 SMDR3127 D0GA220JA023 .063W 5% 22 SMDR3129 D0GA102JA023 .063W 5% 1K SMDR3132 D0GB103JA072 0.1W 5% 10K SMDR3137 D0GF750JA048 0.25W 5% 75 SMDR3141 D0GF750JA048 0.25W 5% 75 SMDR3142 D0GF750JA048 0.25W 5% 75 SMDR3143 D0GF750JA048 0.25W 5% 75 SMDR3147 D0GF750JA048 0.25W 5% 75 SMDR3150 D0GA220JA023 .063W 5% 22 SMDR3151 D0GF750JA048 0.25W 5% 75 SMDR3156 D0GA104JA023 .063W 5% 100K SMDR3157 D1HY2204A012 .063W 5% 22 SMDR3163 D0GA104JA023 .063W 5% 100K

    33

  • DescriptionCct Ref Parts Number DescriptionCct Ref Parts NumberSMDR3164 D0GA104JA023 .063W 5% 100K SMDR3167 D0GA333JA023 .063W 5% 33K SMDR3168 D0GA333JA023 .063W 5% 33K SMDR3171 D0GA101JA023 .063W 5% 100 SMDR3172 D0GA101JA023 .063W 5% 100 SMDR3173 D0GB104ZA041 0.1W 5% 100K SMDR3179 D0GA331JA023 .063W 5% 330 SMDR3180 D0GA331JA023 .063W 5% 330 SMDR3181 D0GD750JA052 .125W 5% 75 SMDR3182 D0GD750JA052 .125W 5% 75 SMDR3183 D0GD750JA052 .125W 5% 75 SMDR3184 D0GA333JA023 .063W 5% 33K SMDR3185 D0GA333JA023 .063W 5% 33K SMDR3188 D0GB104ZA041 0.1W 5% 100K SMDR3189 D1BB1003A055 0.1W 1% 100K SMDR3193 D0GA220JA023 .063W 5% 22 SMDR3194 D0GA220JA023 .063W 5% 22 SMDR3195 D0GA220JA023 .063W 5% 22 SMDR3198 D0GA680JA023 .063W 5% 68 SMDR3201 D0GA101JA023 .063W 5% 100 SMDR3204 D0GA304JA015 .063W 5% 300K SMDR3206 D0GA104JA023 .063W 5% 100K SMDR3208 D0GA273JA023 .063W 5% 27K SMDR3231 D0GB103JA072 0.1W 5% 10K SMDR3233 D0GB203ZA038 0.1W 5% 20K SMDR3234 D0GB203ZA038 0.1W 5% 20K SMDR3237 D0GB473JA072 0.1W 5% 47K SMDR3238 D0GB473JA072 0.1W 5% 47K SMDR3871 D0GAR00J0005 .063W 5% 0 SMDR4066 D0GAR00J0005 .063W 5% 0 SMDR4074 D0GA243JA023 .063W 5% 24K SMDR4087 D0GA102JA023 .063W 5% 1K SMDR4092 D0GA473JA023 .063W 5% 47K SMDR4702 D0GA103JA023 .063W 5% 10K SMDR4708 D0GA103JA023 .063W 5% 10K SMDR4709 D0GA103JA023 .063W 5% 10K SMDR4710 D0GA473JA023 .063W 5% 47K SMDR4711 D0GA102JA023 .063W 5% 1K SMDR4712 D0GA473JA023 .063W 5% 47K SMDR4715 D0GA103JA023 .063W 5% 10K SMDR4721 D0GA103JA023 .063W 5% 10K SMDR4722 D0GA103JA023 .063W 5% 10K SMDR4723 D0GA473JA023 .063W 5% 47K SMDR4724 D0GA102JA023 .063W 5% 1K SMDR4725 D0GA473JA023 .063W 5% 47K SMDR4728 D0GA103JA023 .063W 5% 10K SMDR4732 D0GA103JA023 .063W 5% 10K SMDR4734 D0GA103JA023 .063W 5% 10K SMDR4735 D0GA103JA023 .063W 5% 10K SMDR4736 D0GA473JA023 .063W 5% 47K SMDR4737 D0GA102JA023 .063W 5% 1K SMDR4738 D0GA473JA023 .063W 5% 47K SMDR4739 D0GA220JA023 .063W 5% 22 SMDR4744 D0GA680JA023 .063W 5% 68 SMDR4745 D0GA680JA023 .063W 5% 68 SMDR4746 D0GA680JA023 .063W 5% 68 SMDR4747 D0GA680JA023 .063W 5% 68 SMDR4748 D0GA680JA023 .063W 5% 68 SMDR4749 D0GA680JA023 .063W 5% 68 SMDR4750 D0GA680JA023 .063W 5% 68 SMDR4751 D0GA680JA023 .063W 5% 68 SMDR4752 D1BA1600A023 .063W 1% 160 SMDR4753 D1BA82R0A014 .063W 1% 82 SMDR4763 D0GA473JA023 .063W 5% 47K SMDR4764 D0GA473JA023 .063W 5% 47K SMDR4765 D0GA473JA023 .063W 5% 47K SMDR4766 D0GA473JA023 .063W 5% 47K SMDR4767 D0GA392JA023 .063W 5% 3K9

    SMDR4770 D0GA473JA023 .063W 5% 47K SMDR4771 D0GA152JA023 .063W 5% 1K5 SMDR4772 D0GA152JA023 .063W 5% 1K5 SMDR4774 D0GA473JA023 .063W 5% 47K SMDR4775 D0GA473JA023 .063W 5% 47K SMDR4776 D0GA680JA023 .063W 5% 68 SMDR4777 D0GA680JA023 .063W 5% 68 SMDR4780 D0GA121JA023 .063W 5% 120 SMDR4788 D0GA103JA023 .063W 5% 10K SMDR4794 D0GA103JA023 .063W 5% 10K SMDR4795 D0GA103JA023 .063W 5% 10K SMDR4796 D0GA473JA023 .063W 5% 47K SMDR4797 D0GA102JA023 .063W 5% 1K SMDR4798 D0GA473JA023 .063W 5% 47K SMDR4799 D0GA273JA023 .063W 5% 27K SMDR4900 D0GFR00J0005 0.25W 5% 0 SMDR4901 D1HY6804A012 .063W 5% 68 SMDR4902 D0GA680JA023 .063W 5% 68 SMDR4904 D1HYR004A024 .063W 5% 0 SMDR4906 D0GA822JA023 .063W 5% 8K2 SMDR4907 D0GA102JA023 .063W 5% 1K SMDR4908 D0GA102JA023 .063W 5% 1K SMDR4917 D0GA472JA023 .063W 5% 4K7 SMDR4918 D0GA472JA023 .063W 5% 4K7 SMDR4955 D0GA103JA023 .063W 5% 10K SMDR4956 D0GA102JA023 .063W 5% 1K SMDR4973 D0GA103JA023 .063W 5% 10K SMDR4974 D0GA103JA023 .063W 5% 10K SMDR4975 D0GF122JA048 0.1W 5% 1K2 SMDR4976 D0GA101JA023 .063W 5% 100 SMDR4977 D0GA101JA023 .063W 5% 100 SMDR4980 D0GB332JA072 0.1W 5% 3K3 SMDR4981 D0GA103JA023 .063W 5% 10K SMDR4982 D0GA473JA023 .063W 5% 47K SMDR5002 D0GA683JA023 .063W 5% 68K SMDR5003 D0GA103JA023 .063W 5% 10K SMDR5006 D0GA223JA023 .063W 5% 22K SMDR5007 D0GA223JA023 .063W 5% 22K SMDR5009 D1BA5602A023 .063W 1% 56K SMDR5012 D1BA2202A023 .063W 1% 22K SMDR5030 D0GA103JA023 .063W 5% 10K SMDR5100 D0GA101JA023 .063W 5% 100 SMDR5101 D0GA473JA023 .063W 5% 47K SMDR5102 D0GA473JA023 .063W 5% 47K SMDR5104 D0GA103JA023 .063W 5% 10K SMDR5152 D0GA222JA023 .063W 5% 2K2 SMDR5175 D0GA680JA023 .063W 5% 68 SMDR5181 D0GA103JA023 .063W 5% 10K SMDR5302 D1BB1962A055 0.1W 1% 19K6 SMDR5303 D0GB102ZA038 0.1W OTH 1K SMDR5304 D0GA473JA023 .063W 5% 47K SMDR5306 D0GA302JA023 .063W 5% 3K SMDR5307 D0GA132JA023 .063W 5% 1K3 SMDR5308 D0GA392JA023 .063W 5% 3K9 SMDR5309 D0GA104JA023 .063W 5% 100K SMDR5310 D0GAR00J0005 .063W 5% 0 SMDR5311 D0GA104JA023 .063W 5% 100K SMDR5400 D0GAR00J0005 .063W 5% 0 SMDR5401 D1BA2202A023 .063W 1% 22K SMDR5402 D0GB911ZA037 0.1W 5% 910 SMDR5403 D1BB2871A106 0.1W 1% 2K87 SMDR5420 D0GAR00J0005 .063W 5% 0 SMDR5421 D1BA3302A023 .063W 1% 33K SMDR5422 D0GB911ZA037 0.1W 5% 910 SMDR5423 D1BB4871A106 0.1W 1% 4K87 SMDR5441 D0GAR00J0005 .063W 5% 0 SMDR5442 D1BB1301A195 0.1W 0.5 1K3 SMDR5443 D1BB7501A195 0.1W 0.5 7K5

    34

  • DescriptionCct Ref Parts Number DescriptionCct Ref Parts NumberSMDR5722 D0GBR00J0004 0.1W 5% 0 SMDR5780 D0GAR00J0005 .063W 5% 0 SMDR5782 D1BA2001A023 .063W 1% 2K SMDR5783 D1BA1001A023 .063W 1% 1K SMDR5784 D1BA3001A023 .063W 1% 3K SMDR5852 D0GA103JA023 .063W 5% 10K SMDR6701 D0GAR00J0005 .063W 5% 0 SMDR6702 EXB2HV680JV .063W 5% 68 SMDR6704 EXB28V680JX .031W 5% 68 SMDR6713 D0GB103JA072 0.1W 5% 10K SMDR6715 D0GA103JA023 .063W 5% 10K SMDR6723 D0GAR00J0005 .063W 5% 0 SMDR6726 D0GA681JA023 .063W 5% 680 SMDR6727 D0GA681JA023 .063W 5% 680 SMDR6730 D0GAR00J0005 .063W 5% 0 SMDR6731 D0GA103JA023 .063W 5% 10K SMDR6732 D0GA103JA023 .063W 5% 10K SMDR6739 D0GAR00J0005 .063W 5% 0 SMDR6740 D0GAR00J0005 .063W 5% 0 SMDR6741 D0GAR00J0005 .063W 5% 0 SMDR6742 D0GAR00J0005 .063W 5% 0 SMDR6851 D1BA1622A023 .063W 1% 16K2 SMDR6900 D0GA272JA023 .063W 5% 2K7 SMDR6901 D0GA272JA023 .063W 5% 2K7 SMDR6902 D0GA103JA023 .063W 5% 10K SMDR6903 D0GA471JA023 .063W 5% 470 SMDR6904 EXB28V680JX .031W 5% 68 SMDR6905 D0GAR00J0005 .063W 5% 0 SMDR6906 EXB2HV680JV .063W 5% 68 SMDR6907 D0GA681JA023 .063W 5% 680 SMDR6908 D0GA681JA023 .063W 5% 680 SMDR8008 D0GA331JA023 .063W 5% 330 SMDR8009 D0GA1R1JA023 .063W 5% 1R1 SMDR8100 D1BB2001A197 0.1W 0.5 2K SMDR8101 D1BB1051A087 0.1W 0,5 1K05 SMDR8111 D1BB2001A197 0.1W 0.5 2K SMDR8112 D1BB1961A087 0.1W 0.5 1K96 SMDR8200 D1BA2400A023 .063W 1% 240 SMDR8203 D1BA2700A023 .063W 1% 270 SMDR8204 D1BA2700A023 .063W 1% 270 SMDR8205 D1BA2700A023 .063W 1% 270 SMDR8206 D1BA2700A023 .063W 1% 270 SMDR8207 D1BA2700A023 .063W 1% 270 SMDR8208 D1BA2700A023 .063W 1% 270 SMDR8217 D0GA221JA023 .063W 5% 220 SMDR8218 D0GA221JA023 .063W 5% 220 SMDR8219 D1BA2400A023 .063W 1% 240 SMDR8220 D1BA2400A023 .063W 1% 240 SMDR8221 D0GA103JA023 .063W 5% 10K SMDR8230 D1BA2700A023 .063W 1% 270 SMDR8231 D1BA2700A023 .063W 1% 270 SMDR8232 D1BA2700A023 .063W 1% 270 SMDR8233 D1BA2700A023 .063W 1% 270 SMDR8234 D0GA470JA023 .063W 5% 47 SMDR8235 D0GA470JA023 .063W 5% 47 SMDR8236 D0GA470JA023 .063W 5% 47 SMDR8237 D0GA470JA023 .063W 5% 47 SMDR8238 D0GA220JA023 .063W 5% 22 SMDR8240 D1HY2208A012 .063W 5% 22 SMDR8241 D1HY2204A012 .063W 5% 22 SMDR8242 D1HY2204A012 .063W 5% 22 SMDR8243 D1HY2204A012 .063W 5% 22 SMDR8300 D0GA471JA023 .063W 5% 470 SMDR8301 D1BA6201A023 .063W 1% 6K2 SMDR8302 D0GA360JA023 .063W 5% 36 SMDR8303 D0GA360JA023 .063W 5% 36 SMDR8304 D0GA360JA023 .063W 5% 36 SMDR8305 D0GA360JA023 .063W 5% 36

    SMDR8400 D0GA680JA023 .063W 5% 68 SMDR8401 D0GA680JA023 .063W 5% 68 SMDR8402 D0GA680JA023 .063W 5% 68 SMDR8403 D0GA680JA023 .063W 5% 68 SMDR8404 D0GA680JA023 .063W 5% 68 SMDR8405 D0GA680JA023 .063W 5% 68 SMDR8406 D1HY6808A012 .063W 5% 68 SMDR8407 D1HY6808A012 .063W 5% 68 SMDR8408 D1HY6808A012 .063W 5% 68 SMDR8409 D1HY6804A012 .063W 5% 68 SMDR8410 D1HY6808A012 .063W 5% 68 SMDR8411 D1HY6808A012 .063W 5% 68 SMDR8418 D0GA103JA023 .063W 5% 10K SMDR8424 D0GA223JA023 .063W 5% 22K SMDR8425 D0GA223JA023 .063W 5% 22K SMDR8426 D0GA473JA023 .063W 5% 47K SMDR8427 D0GA473JA023 .063W 5% 47K SMDR8429 D0GA473JA023 .063W 5% 47K SMDR8433 D0GA103JA023 .063W 5% 10K SMDR8434 D0GA103JA023 .063W 5% 10K SMDR8435 D0GA223JA023 .063W 5% 22K SMDR8441 D0GA103JA023 .063W 5% 10K SMDR8442 D0GA103JA023 .063W 5% 10K SMDR8444 D0GA103JA023 .063W 5% 10K SMDR8445 D1HY1018A012 .063W 5% 100 SMDR8450 D0GA103JA023 .063W 5% 10K SMDR8451 D0GA103JA023 .063W 5% 10K SMDR8453 D1BA3742A014 .063W 1% 37K4 SMDR8454 D0GA103JA023 .063W 5% 10K SMDR8455 D0GA103JA023 .063W 5% 10K SMDR8456 D0GA104JA023 .063W 5% 100K SMDR8457 D1BA1822A014 .063W 1% 18K2 SMDR8458 D1BA3742A014 .063W 1% 37K4 SMDR8459 D1BA3742A014 .063W 1% 37K4 SMDR8469 D0GA103JA023 .063W 5% 10K SMDR8470 D0GA103JA023 .063W 5% 10K SMDR8472 D0GA104JA023 .063W 5% 100K SMDR8480 D0GAR00J0005 .063W 5% 0 SMDR8482 D1BA6200A014 .063W 1% 620 SMDR8483 D1BA30R0A014 .063W 1% 30 SMDR8486 D0GA473JA023 .063W 5% 47K SMDR8487 D0GA103JA023 .063W 5% 10K SMDR8488 D0GA104JA023 .063W 5% 100K SMDR8490 D0GA103JA023 .063W 5% 10K SMDR8493 D0GA103JA023 .063W 5% 10K SMDR8498 D0GAR00J0005 .063W 5% 0 SMDR8505 D0GA104JA023 .063W 5% 100K SMDR8515 D0GAR00J0005 .063W 5% 0 SMDR8516 D0GAR00J0005 .063W 5% 0 SMDR8519 D0GAR00J0005 .063W 5% 0 SMDR8522 D0GAR00J0005 .063W 5% 0 SMDR8523 D0GAR00J0005 .063W 5% 0 SMDR8524 D0GAR00J0005 .063W 5% 0 SMDR8601 D1BA75R0A023 .063W 1% 75 SMDR8602 D1BA75R0A023 .063W 1% 75 SMDR8603 D1BA75R0A023 .063W 1% 75 SMDR8604 D1BA75R0A023 .063W 1% 75 SMDR8611 D1BA2491A023 .063W 1% 2K49 SMDR8612 D0GA472JA023 .063W 5% 4K7 SMDR8613 D0GA680JA023 .063W 5% 68 SMDR8614 D0GA680JA023 .063W 5% 68 SMDR8616 D0GA680JA023 .063W 5% 68 SMDR8617 D0GA680JA023 .063W 5% 68 SMDR8620 D0GA472JA023 .063W 5% 4K7 SMDR8622 D0GA680JA023 .063W 5% 68 SMDR8623 D0GA680JA023 .063W 5% 68 SMDR8624 D0GA680JA023 .063W 5% 68 SMDR8625 D0GA152JA023 .063W 5% 1K5

    35

  • DescriptionCct Ref Parts Number DescriptionCct Ref Parts NumberSMDR8626 D0GA680JA023 .063W 5% 68 SMDR8627 D0GA472JA023 .063W 5% 4K7 SMDR8629 D0GA472JA023 .063W 5% 4K7 SMDR8630 D0GA680JA023 .063W 5% 68 SMDR8631 D0GA680JA023 .063W 5% 68 SMDR8634 D0GA472JA023 .063W 5% 4K7 SMDR8635 D0GA680JA023 .063W 5% 68 SMDR8636 D0GA680JA023 .063W 5% 68 SMDR8660 D0GA560JA023 .063W 5% 56 SMDR8661 D0GA560JA023 .063W 5% 56 SMDR8662 D0GA560JA023 .063W 5% 56 SMDR8663 D0GA560JA023 .063W 5% 56 SMDR8664 D0GA560JA023 .063W 5% 56 SMDR8665 D0GA560JA023 .063W 5% 56 SMDR8666 D1HY1038A012 .063W 5% 10K SMDR8667 D1HY5604A012 .063W 5% 56 SMDR8668 D1HY5604A012 .063W 5% 56 SMDR8669 D0GA220JA023 .063W 5% 22 SMDR8673 D1BB1200A055 0.1W 1% 120 SMDR8674 D1BB2000A055 0.1W 1% 200 SMDR8755 D0GA104JA023 .063W 5% 100K SMDR8797 D1BA1200A023 .063W 1% 120 SMDR8798 D1BA56R0A023 .063W 1% 56 SMDR8800 D0GA472JA023 .063W 5% 4K7 SMDR8801 D0GA103JA023 .063W 5% 10K SMDR8802 D0GA103JA023 .063W 5% 10K SMDR8803 D0GA103JA023 .063W 5% 10K SMDR8817 D0GA103JA023 .063W 5% 10K SMDR8821 D0GA103JA023 .063W 5% 10K SMDR8829 D0GA103JA023 .063W 5% 10K SMDR8850 D0GA331JA023 .063W 5% 330 SMDR8851 D1BB7151A106 0.1W 1% 7K15 SMDR8852 D0GA102JA023 .063W 5% 1K SMDR8853 D0GA182JA023 .063W 5% 1K8 SMDR8854 D0GA102JA023 .063W 5% 1K SMDR8858 D0GA473JA023 .063W 5% 47K SMDR8859 D0GA473JA023 .063W 5% 47K SMDR8870 D0GA473JA023 .063W 5% 47K SMDR8871 D0GA473JA023 .063W 5% 47K SMDR8872 D0GA473JA023 .063W 5% 47K SMDR8873 D0GA473JA023 .063W 5% 47K SMDR8874 D0GA473JA023 .063W 5% 47K SMDR8875 D0GA473JA023 .063W 5% 47K SMDR8876 D0GA473JA023 .063W 5% 47K SMDR8877 D0GA473JA023 .063W 5% 47K SMDR8883 D0GA103JA023 .063W 5% 10K SMDR8885 D0GA473JA023 .063W 5% 47K SMDR8887 D0GA473JA023 .063W 5% 47K SMDR8902 D0GA473JA023 .063W 5% 47K SMDR8904 D0GA472JA023 .063W 5% 4K7 SMDR8909 D0GA222JA023 .063W 5% 2K2 SMDR8910 D0GA103JA023 .063W 5% 10K SMDR8911 EXB2HV121JV .063W 5% 120 SMDR9500 D1BB3R30A055 0.1W 1% 3.3 SMDR9501 D0GD105JA052 .125W 5% 1M SMDR9502 D1BB3R30A055 0.1W 1% 3.3 SMDR9503 D0GD105JA052 .125W 5% 1M SMDR9504 D1BB3R30A055 0.1W 1% 3.3 SMDR9505 D0GD105JA052 .125W 5% 1M SMDR9506 D1BB3R30A055 0.1W 1% 3.3 SMDR9507 D0GD105JA052 .125W 5% 1M SMDR9508 D1BB3R30A055 0.1W 1% 3.3 SMDR9509 D0GD105JA052 .125W 5% 1M SMDR9510 D1BB3R30A055 0.1W 1% 3.3 SMDR9511 D0GD105JA052 .125W 5% 1M SMDR9512 D1BB3R30A055 0.1W 1% 3.3 SMDR9513 D0GD105JA052 .125W 5% 1M SMDR9514 D1BB3R30A055 0.1W 1% 3.3

    SMDR9515 D0GD105JA052 .125W 5% 1M SMDR9516 D1BB3R30A055 0.1W 1% 3.3 SMDR9517 D0GD105JA052 .125W 5% 1M SMDR9518 D1BB3R30A055 0.1W 1% 3.3 SMDR9519 D0GD105JA052 .125W 5% 1M SMDR9520 D1BB3R30A055 0.1W 1% 3.3 SMDR9521 D0GD105JA052 .125W 5% 1M SMDR9522 D1BB3R30A055 0.1W 1% 3.3 SMDR9523 D0GD105JA052 .125W 5% 1M SMDR9524 D1BB3R30A055 0.1W 1% 3.3 SMDR9525 D0GD105JA052 .125W 5% 1M SMDR9526 D1BB3R30A055 0.1W 1% 3.3 SMDR9527 D0GD105JA052 .125W 5% 1M SMDR9528 D1BB3R30A055 0.1W 1% 3.3 SMDR9529 D0GD105JA052 .125W 5% 1M SMDR9530 D1BB3R30A055 0.1W 1% 3.3 SMDR9531 D0GD105JA052 .125W 5% 1M SMDR9546 D0GAR00J0005 .063W 5% 0 SMDR9548 D0GD1R0JA035 .125W 5% 1 SMDR9549 D0GA302JA023 .063W 5% 3K SMDR9550 D0GA123JA023 .063W 5% 12K SMDR9551 D0GA473JA023 .063W 5% 47K SMDR9705 D0GBR00J0004 0.1W 5% 0 SMDR9712 D0GBR00J0004 0.1W 5% 0 SMDR9901 D0GAR00J0005 .063W 5% 0

    CAPACITORSS.M.CAPC0062 F1G1A105A047 10V 1000nFS.M.CAPC0063 F1G1A105A047 10V 1000nFS.M.CAPC0064 F1G1A105A047 10V 1000nFS.M.CAPC0065 F1G1A105A047 10V 1000nFS.M.CAPC1958 F1G1E1030005 25V 10nFS.M.CAPC2000 F1G1A105A047 10V 1000nFS.M.CAPC2003 F1G1H1020008 50V 1nFS.M.CAPC2012 F1L0G1070001 4V 100FS.M.CAPC2014 F1K1E106A134 25V 10FS.M.CAPC2023 F1G1C104A077 16V 100nFS.M.CAPC2041 F1G1C104A077 16V 100nFCERAMICC2805 F1H1C104A041 16V 100nFS.M.CAPC3061 F1G1C104A077 16V 100nFS.M.CAPC3062 F1G1C104A077 16V 100nFS.M.CAPC3063 F1G1C104A077 16V 100nFS.M.CAPC3065 F1G1H220A834 50V 22pFS.M.CAPC3084 F1H0J105A051 6.3V 1000nFS.M.CAPC3085 F1H0J105A051 6.3V 1000nFS.M.CAPC3086 F1H0J105A051 6.3V 1000nFS.M.CAPC3108 F1G1H561A830 50V 560pFS.M.CAPC3109 F1G1H561A830 50V 560pFS.M.CAPC3114 F1G1E333A059 25V 33nFS.M.CAPC3115 F1G1E333A059 25V 33nFS.M.CAPC3116 F1H0J105A051 6.3V 1000nFS.M.CAPC3117 F1H0J105A051 6.3V 1000nFS.M.CAPC3118 F1H0J105A051 6.3V 1000nFS.M.CAPC3124 F1H0J105A051 6.3V 1000nFS.M.CAPC3130 F1H0J105A051 6.3V 1000nFS.M.CAPC3131 F1H0J105A051 6.3V 1000nFS.M.CAPC3132 F1H0J105A051 6.3V 1000nFS.M.CAPC3145 F1J1A106A087 10V 10FS.M.CAPC3147 F1J1A106A087 10V 10FS.M.CAPC3151 F1H1A105A099 10V 1000nFS.M.CAPC3152 F1H1A105A099 10V 1000nFS.M.CAPC3159 F1H1A105A099 10V 1000nFS.M.CAPC3160 F1H1A105A099 10V 1000nFS.M.CAPC3171 F1J1A106A087 10V 10FS.M.CAPC3172 F1J1A106A087 10V 10FS.M.CAPC3175 F1J1E105A287 25V 1000nFS.