Solidworks Lesson 6 - Assembly Drawings Introduction to Robotics.
Tutorial: Drawings Chapter 2. Choose a Paper Size/Format Leave Unchecked for Plain Sheet...
-
date post
15-Jan-2016 -
Category
Documents
-
view
219 -
download
0
Transcript of Tutorial: Drawings Chapter 2. Choose a Paper Size/Format Leave Unchecked for Plain Sheet...
Tutorial: Drawings
Chapter 2
Choose a Paper Size/Format
Leave Unchecked for Plain Sheet
INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009
Set Units
• Units can be different from those of parts• Units can be changed at any time; all dimensions will
be converted to the new unit system
INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009
Third-Angle Projection
• Typical for most U.S. drawings
FRONT
TOP
RIGHT
INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009
Importing Dimensions
• Dimensions are linked to part values
• Automatically –imported dimensions can be moved between drawing views as desired
INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009
Section View
• Defined by a line through the part
INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009
Detail View
• Allows small features to be more easily dimensioned
INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009
Tolerances
• Many dimensions have their tolerances defined by the default tolerances of the title block or a note
• Individual tolerances can be defined for critical dimensions
INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009
Geometric Tolerances
• Geometric tolerances are often added to define requirements beyond dimensional tolerances. In this case, the flatness of the back of the flange is specified
INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009
Finished Drawing
• With title block and note
INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009
eDrawings
• eDrawings can be shared with other users without having to share the associated part file
• eDrawings files are very small compared to SW part and drawing files
• Users without SolidWorks can view eDrawings with a free viewer
• eDrawings can also be sent as executable files containing the viewer
INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009