TULSA™ · 2019. 5. 16. · Globus (Shetland) Ltd, T2 Trafford Point, Twining Road, Trafford Park,...
8
A Flock-lined for extra comfort and ease of donning A Textured palm and fingertips for gripping in wet and dry conditions A Resistant to a wide variety of chemicals and solvents A EN374 and Category III approved A Chlorinated and sanitised to reduce odours A Straight cuff A Red colouring A Length: 330mm Glove System For further information please visit www.globus.co.uk/icon FEATURES Typical Industries Suitable Applications SUITABLE FOR CHEMICAL PROTECTION UNSUPPORTED NITRILE GAUNTLET Chemical resistant gauntlet with a textured pattern on the palm. Flock-lined for extra comfort. Agriculture Automotive Chemical Facility Management Oil and Gas Repair and Refurbish Chemical Handling Cleaning Commercial Printing Paintshop Pesticide Handling TULSA™ CERTIFICATION EN 388: 2003 EN 388: 2016 EN 374-2: 2003 EN ISO 374- 5: 2016 EN 374-1: 2003 EN ISO 374- 1: 2016/ Type A 4101 4101X AJKL AJKLM NOPT See overleaf for explanation GROUP
Transcript of TULSA™ · 2019. 5. 16. · Globus (Shetland) Ltd, T2 Trafford Point, Twining Road, Trafford Park,...
A Flock-lined for extra comfort and ease of donning A Textured palm and fingertips for gripping in wet
and dry conditions A Resistant to a wide variety of chemicals and
solvents A EN374 and Category III approved A Chlorinated and sanitised to reduce odours A Straight cuff A Red colouring A Length: 330mm
Glove System
For further information please visit www.globus.co.uk/icon
FEATURES
Typical Industries Suitable Applications
SUITABLE FOR
CHEMICAL PROTECTION
UNSUPPORTED NITRILE GAUNTLET
Chemical resistant gauntlet with a textured pattern on the palm. Flock-lined for extra comfort.
� Agriculture � Automotive � Chemical � Facility Management � Oil and Gas � Repair and Refurbish
� Chemical Handling � Cleaning � Commercial Printing � Paintshop � Pesticide Handling
TULSA™
CERTIFICATION
EN 388: 2003
EN 388: 2016
EN 374-2: 2003
EN ISO 374-5: 2016
EN 374-1: 2003
EN ISO 374-1: 2016/ Type A
4101 4101XAJKL AJKLM NOPT
See overleaf for explanation
GROUP
© 2019 Globus (Shetland) Ltd | SKY-DATA-TULSA-0219_1
EUROPEwww.globus.co.uk
E: [email protected]: +44 (0)161 877 4747F: +44 (0)161 877 4746
MIDDLE EAST AND AFRICAwww.globusgroup.com/gcc
E: [email protected]: +971 4 882 9962F: +971 4 882 9963
ABOUT GLOBUSWorld leader in protecting hands, Globus serves organisations with bespoke hand protection solutions built from a professional range of high performance protective gloves.
Globus is proud to offer bespoke solutions that deliver robust commercial benefits not just safety improvements. We have an enviable track record in helping to reduce hand accident rates whilst delivering improved comfort and productivity as well as waste and cost reductions.
Globus applies its expertise across a spectrum of industries, meeting and exceeding a diverse range of hand protection requirements; from the rigorous demands of the petrochemical and construction industries to the complexities of clean room and aerospace manufacturing.
Find out why leading companies rely on a solution from Globus to help implement a comprehensive hand protection policy. Contact us today.
The descriptions, characteristics, applications and photos are given for information purposes and do not constitute a contractual commitment. The manufacturer reserves the right to make any modifications it deems necessary.
CHEMICAL PROTECTION
EC compliance certificate delivered by the notified body SGS United Kingdom Limited., Unit 202B Worle Parkway, Weston Super-Mare, BS22 6WA, United Kingdom (Notified Body No. 0120)
TULSA™SUITABLE FOR ORDERING DETAILS
CERTIFICATION LEGENDS
RECOMMENDATIONS FOR USE
SIZE CODE PACKAGING
GROUP
Globus (Shetland) Ltd, T2 Trafford Point, Twining Road, Trafford Park, Manchester, M17 1SH, UNITED KINGDOMGlobus EMEA FZE, Jafza One, Tower A, Office 2201, Jebel Ali, PO Box 61195, Dubai, UNITED ARAB EMIRATES
MECHANICAL HAZARDSEN 388: 2003
MECHANICAL HAZARDSEN 388: 2016
PERFORMANCE LEVELS PERFORMANCE LEVELS*0-4 0-40-5 0-50-4 0-40-4 0-4 A-F P
Abrasion Resistance Abrasion Resistance * If tests are not performed or are not applicable, ‘X’ will be placed instead of a number/leter
Blade Cut Resistance Blade Cut Resistance
Tear Resistance Tear Resistance
Puncture Resistance Puncture Resistance
Straight Blade Cut Resistance (EN ISO: 13997)Impact Resistance
� It is the responsibility of the end user and not the manufacturer to determine glove suitability for the intended use.
� The gloves can be used in general chemical handling, but are not recommended for prolonged use with highly corrosive or powerful organic solvents. Do not use near moving machines if there is a risk of entanglement.
� Storage: Gloves should be ideally stored in cool, dry conditions in original packaging and away from direct sunlight.
� Cleaning/Maintenance: Both new and used gloves should be thoroughly inspected before being worn to ensure no damage is present. Gloves should not be left in contaminated condition if reuse is intended in which case gloves should be cleaned as far as possible. If appropriate, decontamination may take place under lukewarm water using laundry soap and detergent. Don’t use chlorine bleaches.
10 pairs per bag
SKY940SKY941SKY942SKY943SKY944
6/XS7/S8/M9/L
10/XL120 pairs per
case
MATERIALSLINER:
COATING:
COLOUR
LENGTH (mm)
CUFF STYLE
Cotton Flock
Nitrile
Red
330
Gauntlet
GHIJKL
M*N*O*P*S*T*
SPECIFIC CHEMICALPROTECTIONEN 374-1: 2003EN ISO 374: 2016/Type A
ABCDEF
MethanolAcetoneAcetonitrileDichloromethaneCarbon DisulfideToluene
Chemical List
*2016 Additional Chemicals
VIRUS
DiethylamineTetrahydrofuraneEthyl acetaten-HeptaneSodium hydroxide 40%Sulphuric acid 96%
65% Nitric acid99% Acetic acid25% Ammonium hydroxide30% Hydrogen peroxide40% Hydrofluoric acid37% Formaldehyde
(If passed)
MICRO-ORGANISMSEN 374-2: 2003EN 374-5: 2016
FOOD CONTACTDIRECTIVE 2002 / 72 EC
Type of gloves Breakthrough time
A ≥30 min for at least 6 chemicals
B ≥30 min for at least 3 chemicals
C ≥10 min for at least 1 chemical
A Flock-lined for extra comfort and ease of donning A Textured palm and fingertips for gripping in wet
and dry conditions A Resistant to a wide variety of chemicals and
solvents A EN374 and Category III approved A Chlorinated and sanitised to reduce odours A Straight cuff A Yellow colouring A Length: 330mm
Glove System
For further information please visit www.globus.co.uk/icon
FEATURES
Typical Industries Suitable Applications
SUITABLE FOR CERTIFICATION
EN 388: 2003
EN 388: 2016
EN 374-2: 2003
EN ISO 374-5: 2016
EN 374-1: 2003
EN ISO 374-1: 2016/ Type A
4101 4101XAJKL AJKLM NOPT
See overleaf for explanation
CHEMICAL PROTECTION
UNSUPPORTED NITRILE GAUNTLET
Chemical resistant gauntlet with a textured pattern on the palm. Flock-lined for extra comfort.
� Agriculture � Automotive � Chemical � Facility Management � Oil and Gas � Repair and Refurbish
� Chemical Handling � Cleaning � Commercial Printing � Paintshop � Pesticide Handling
RIALTO™
GROUP
© 2019 Globus (Shetland) Ltd | SKY-DATA-RIALTO-0219_1
EUROPEwww.globus.co.uk
E: [email protected]: +44 (0)161 877 4747F: +44 (0)161 877 4746
MIDDLE EAST AND AFRICAwww.globusgroup.com/gcc
E: [email protected]: +971 4 882 9962F: +971 4 882 9963
ABOUT GLOBUSWorld leader in protecting hands, Globus serves organisations with bespoke hand protection solutions built from a professional range of high performance protective gloves.
Globus is proud to offer bespoke solutions that deliver robust commercial benefits not just safety improvements. We have an enviable track record in helping to reduce hand accident rates whilst delivering improved comfort and productivity as well as waste and cost reductions.
Globus applies its expertise across a spectrum of industries, meeting and exceeding a diverse range of hand protection requirements; from the rigorous demands of the petrochemical and construction industries to the complexities of clean room and aerospace manufacturing.
Find out why leading companies rely on a solution from Globus to help implement a comprehensive hand protection policy. Contact us today.
The descriptions, characteristics, applications and photos are given for information purposes and do not constitute a contractual commitment. The manufacturer reserves the right to make any modifications it deems necessary.
CHEMICAL PROTECTION
EC compliance certificate delivered by the notified body SGS United Kingdom Limited., Unit 202B Worle Parkway, Weston Super-Mare, BS22 6WA, United Kingdom (Notified Body No. 0120)
RIALTO™SUITABLE FOR ORDERING DETAILS
CERTIFICATION LEGENDS
RECOMMENDATIONS FOR USE
SIZE CODE PACKAGING
GROUP
Globus (Shetland) Ltd, T2 Trafford Point, Twining Road, Trafford Park, Manchester, M17 1SH, UNITED KINGDOMGlobus EMEA FZE, Jafza One, Tower A, Office 2201, Jebel Ali, PO Box 61195, Dubai, UNITED ARAB EMIRATES
MECHANICAL HAZARDSEN 388: 2003
MECHANICAL HAZARDSEN 388: 2016
PERFORMANCE LEVELS PERFORMANCE LEVELS*0-4 0-40-5 0-50-4 0-40-4 0-4 A-F P
Abrasion Resistance Abrasion Resistance * If tests are not performed or are not applicable, ‘X’ will be placed instead of a number/leter
Blade Cut Resistance Blade Cut Resistance
Tear Resistance Tear Resistance
Puncture Resistance Puncture Resistance
Straight Blade Cut Resistance (EN ISO: 13997)Impact Resistance
� It is the responsibility of the end user and not the manufacturer to determine glove suitability for the intended use.
� The gloves can be used in general chemical handling, but are not recommended for prolonged use with highly corrosive or powerful organic solvents. Do not use near moving machines if there is a risk of entanglement.
� Storage: Gloves should be ideally stored in cool, dry conditions in original packaging and away from direct sunlight.
� Cleaning/Maintenance: Both new and used gloves should be thoroughly inspected before being worn to ensure no damage is present. Gloves should not be left in contaminated condition if reuse is intended in which case gloves should be cleaned as far as possible. If appropriate, decontamination may take place under lukewarm water using laundry soap and detergent. Don’t use chlorine bleaches.
10 pairs per bag
SKY970SKY971SKY972SKY973SKY974
6/XS7/S8/M9/L
10/XL120 pairs per
case
MATERIALSLINER:
COATING:
COLOUR
LENGTH (mm)
CUFF STYLE
Cotton Flock
Nitrile
Yellow
330
Gauntlet
GHIJKL
M*N*O*P*S*T*
SPECIFIC CHEMICALPROTECTIONEN 374-1: 2003EN ISO 374: 2016/Type A
ABCDEF
MethanolAcetoneAcetonitrileDichloromethaneCarbon DisulfideToluene
Chemical List
*2016 Additional Chemicals
VIRUS
DiethylamineTetrahydrofuraneEthyl acetaten-HeptaneSodium hydroxide 40%Sulphuric acid 96%
65% Nitric acid99% Acetic acid25% Ammonium hydroxide30% Hydrogen peroxide40% Hydrofluoric acid37% Formaldehyde
(If passed)
MICRO-ORGANISMSEN 374-2: 2003EN 374-5: 2016
FOOD CONTACTDIRECTIVE 2002 / 72 EC
Type of gloves Breakthrough time
A ≥30 min for at least 6 chemicals
B ≥30 min for at least 3 chemicals
C ≥10 min for at least 1 chemical
A Flock-lined for extra comfort and ease of donning A Textured palm and fingertips for gripping in wet
and dry conditions A Resistant to a wide variety of chemicals and
solvents A EN374 and Category III approved A Chlorinated and sanitised to reduce odours A Straight cuff A Blue colouring A Length: 330mm
Glove System
For further information please visit www.globus.co.uk/icon
FEATURES
Typical Industries Suitable Applications
SUITABLE FOR
CHEMICAL PROTECTION
UNSUPPORTED NITRILE GAUNTLET
Chemical resistant gauntlet with a textured pattern on the palm. Flock-lined for extra comfort.
� Agriculture � Automotive � Chemical � Facility Management � Oil and Gas � Repair and Refurbish
� Chemical Handling � Cleaning � Commercial Printing � Paintshop � Pesticide Handling
FRISCO™
CERTIFICATION
EN 388: 2003
EN 388: 2016
EN 374-2: 2003
EN ISO 374-5: 2016
EN 374-1: 2003
EN ISO 374-1: 2016/ Type A
4101 4101XAJKL AJKLM NOPT
See overleaf for explanation
GROUP
© 2019 Globus (Shetland) Ltd | SKY-DATA-FRISCO-0219_1
EUROPEwww.globus.co.uk
E: [email protected]: +44 (0)161 877 4747F: +44 (0)161 877 4746
MIDDLE EAST AND AFRICAwww.globusgroup.com/gcc
E: [email protected]: +971 4 882 9962F: +971 4 882 9963
ABOUT GLOBUSWorld leader in protecting hands, Globus serves organisations with bespoke hand protection solutions built from a professional range of high performance protective gloves.
Globus is proud to offer bespoke solutions that deliver robust commercial benefits not just safety improvements. We have an enviable track record in helping to reduce hand accident rates whilst delivering improved comfort and productivity as well as waste and cost reductions.
Globus applies its expertise across a spectrum of industries, meeting and exceeding a diverse range of hand protection requirements; from the rigorous demands of the petrochemical and construction industries to the complexities of clean room and aerospace manufacturing.
Find out why leading companies rely on a solution from Globus to help implement a comprehensive hand protection policy. Contact us today.
The descriptions, characteristics, applications and photos are given for information purposes and do not constitute a contractual commitment. The manufacturer reserves the right to make any modifications it deems necessary.
SUITABLE FOR ORDERING DETAILS
CERTIFICATION LEGENDS
RECOMMENDATIONS FOR USE
SIZE CODE PACKAGING
GROUP
Globus (Shetland) Ltd, T2 Trafford Point, Twining Road, Trafford Park, Manchester, M17 1SH, UNITED KINGDOMGlobus EMEA FZE, Jafza One, Tower A, Office 2201, Jebel Ali, PO Box 61195, Dubai, UNITED ARAB EMIRATES
MECHANICAL HAZARDSEN 388: 2003
MECHANICAL HAZARDSEN 388: 2016
PERFORMANCE LEVELS PERFORMANCE LEVELS*0-4 0-40-5 0-50-4 0-40-4 0-4 A-F P
Abrasion Resistance Abrasion Resistance * If tests are not performed or are not applicable, ‘X’ will be placed instead of a number/leter
Blade Cut Resistance Blade Cut Resistance
Tear Resistance Tear Resistance
Puncture Resistance Puncture Resistance
Straight Blade Cut Resistance (EN ISO: 13997)Impact Resistance
� It is the responsibility of the end user and not the manufacturer to determine glove suitability for the intended use.
� The gloves can be used in general chemical handling, but are not recommended for prolonged use with highly corrosive or powerful organic solvents. Do not use near moving machines if there is a risk of entanglement.
� Storage: Gloves should be ideally stored in cool, dry conditions in original packaging and away from direct sunlight.
� Cleaning/Maintenance: Both new and used gloves should be thoroughly inspected before being worn to ensure no damage is present. Gloves should not be left in contaminated condition if reuse is intended in which case gloves should be cleaned as far as possible. If appropriate, decontamination may take place under lukewarm water using laundry soap and detergent. Don’t use chlorine bleaches.
10 pairs per bag
SKY950SKY951SKY952SKY953SKY954
6/XS7/S8/M9/L
10/XL120 pairs per
case
MATERIALSLINER:
COATING:
COLOUR
LENGTH (mm)
CUFF STYLE
Cotton Flock
Nitrile
Blue
330
Gauntlet
GHIJKL
M*N*O*P*S*T*
SPECIFIC CHEMICALPROTECTIONEN 374-1: 2003EN ISO 374: 2016/Type A
ABCDEF
MethanolAcetoneAcetonitrileDichloromethaneCarbon DisulfideToluene
Chemical List
*2016 Additional Chemicals
VIRUS
DiethylamineTetrahydrofuraneEthyl acetaten-HeptaneSodium hydroxide 40%Sulphuric acid 96%
65% Nitric acid99% Acetic acid25% Ammonium hydroxide30% Hydrogen peroxide40% Hydrofluoric acid37% Formaldehyde
(If passed)
MICRO-ORGANISMSEN 374-2: 2003EN 374-5: 2016
FOOD CONTACTDIRECTIVE 2002 / 72 EC
Type of gloves Breakthrough time
A ≥30 min for at least 6 chemicals
B ≥30 min for at least 3 chemicals
C ≥10 min for at least 1 chemical
CHEMICAL PROTECTION
EC compliance certificate delivered by the notified body SGS United Kingdom Limited., Unit 202B Worle Parkway, Weston Super-Mare, BS22 6WA, United Kingdom (Notified Body No. 0120)
FRISCO™
A Flock-lined for extra comfort and ease of donning A Textured palm and fingertips for gripping in wet
and dry conditions A Resistant to a wide variety of chemicals and
solvents A EN374 and Category III approved A Chlorinated and sanitised to reduce odours A Straight cuff A Green colouring A Length: 330mm
Glove System
For further information please visit www.globus.co.uk/icon
FEATURES
Typical Industries Suitable Applications
SUITABLE FOR CERTIFICATION
CHEMICAL PROTECTION
UNSUPPORTED NITRILE GAUNTLET
Chemical resistant gauntlet with a textured pattern on the palm. Flock-lined for extra comfort.
� Agriculture � Automotive � Chemical � Facility Management � Oil and Gas � Repair and Refurbish
� Chemical Handling � Cleaning � Commercial Printing � Paintshop � Pesticide Handling
EN 388: 2003
EN 388: 2016
EN 374-2: 2003
EN ISO 374-5: 2016
EN 374-1: 2003
EN ISO 374-1: 2016/ Type A
4101 4101XAJKL AJKLM NOPT
See overleaf for explanation
DAKOTA™
GROUP
SUITABLE FOR ORDERING DETAILS
CERTIFICATION LEGENDS
RECOMMENDATIONS FOR USE
© 2019 Globus (Shetland) Ltd | SKY-DATA-DAKOTA-0219_1
EUROPEwww.globus.co.uk
E: [email protected]: +44 (0)161 877 4747F: +44 (0)161 877 4746
MIDDLE EAST AND AFRICAwww.globusgroup.com/gcc
E: [email protected]: +971 4 882 9962F: +971 4 882 9963
ABOUT GLOBUSWorld leader in protecting hands, Globus serves organisations with bespoke hand protection solutions built from a professional range of high performance protective gloves.
Globus is proud to offer bespoke solutions that deliver robust commercial benefits not just safety improvements. We have an enviable track record in helping to reduce hand accident rates whilst delivering improved comfort and productivity as well as waste and cost reductions.
Globus applies its expertise across a spectrum of industries, meeting and exceeding a diverse range of hand protection requirements; from the rigorous demands of the petrochemical and construction industries to the complexities of clean room and aerospace manufacturing.
Find out why leading companies rely on a solution from Globus to help implement a comprehensive hand protection policy. Contact us today.
SIZE CODE PACKAGING
The descriptions, characteristics, applications and photos are given for information purposes and do not constitute a contractual commitment. The manufacturer reserves the right to make any modifications it deems necessary.
GROUP
Globus (Shetland) Ltd, T2 Trafford Point, Twining Road, Trafford Park, Manchester, M17 1SH, UNITED KINGDOMGlobus EMEA FZE, Jafza One, Tower A, Office 2201, Jebel Ali, PO Box 61195, Dubai, UNITED ARAB EMIRATES
CHEMICAL PROTECTION
MECHANICAL HAZARDSEN 388: 2003
MECHANICAL HAZARDSEN 388: 2016
PERFORMANCE LEVELS PERFORMANCE LEVELS*0-4 0-40-5 0-50-4 0-40-4 0-4 A-F P
Abrasion Resistance Abrasion Resistance * If tests are not performed or are not applicable, ‘X’ will be placed instead of a number/leter
Blade Cut Resistance Blade Cut Resistance
Tear Resistance Tear Resistance
Puncture Resistance Puncture Resistance
Straight Blade Cut Resistance (EN ISO: 13997)Impact Resistance
� It is the responsibility of the end user and not the manufacturer to determine glove suitability for the intended use.
� The gloves can be used in general chemical handling, but are not recommended for prolonged use with highly corrosive or powerful organic solvents. Do not use near moving machines if there is a risk of entanglement.
� Storage: Gloves should be ideally stored in cool, dry conditions in original packaging and away from direct sunlight.
� Cleaning/Maintenance: Both new and used gloves should be thoroughly inspected before being worn to ensure no damage is present. Gloves should not be left in contaminated condition if reuse is intended in which case gloves should be cleaned as far as possible. If appropriate, decontamination may take place under lukewarm water using laundry soap and detergent. Don’t use chlorine bleaches.
10 pairs per bag
SKY960SKY961SKY962SKY963SKY964
6/XS7/S8/M9/L
10/XL120 pairs per
case
EC compliance certificate delivered by the notified body SGS United Kingdom Limited., Unit 202B Worle Parkway, Weston Super-Mare, BS22 6WA, United Kingdom (Notified Body No. 0120)
DAKOTA™
MATERIALSLINER:
COATING:
COLOUR
LENGTH (mm)
CUFF STYLE
Cotton Flock
Nitrile
Green
330
Gauntlet
GHIJKL
M*N*O*P*S*T*
SPECIFIC CHEMICALPROTECTIONEN 374-1: 2003EN ISO 374: 2016/Type A
ABCDEF
MethanolAcetoneAcetonitrileDichloromethaneCarbon DisulfideToluene
Chemical List
*2016 Additional Chemicals
VIRUS
DiethylamineTetrahydrofuraneEthyl acetaten-HeptaneSodium hydroxide 40%Sulphuric acid 96%
65% Nitric acid99% Acetic acid25% Ammonium hydroxide30% Hydrogen peroxide40% Hydrofluoric acid37% Formaldehyde
(If passed)
MICRO-ORGANISMSEN 374-2: 2003EN 374-5: 2016
FOOD CONTACTDIRECTIVE 2002 / 72 EC
Type of gloves Breakthrough time
A ≥30 min for at least 6 chemicals
B ≥30 min for at least 3 chemicals
C ≥10 min for at least 1 chemical
