Tubular Product Manual Oct g Casing Properties

7/22/2019 Tubular Product Manual Oct g Casing Properties

1/14

Engineering Properties

This section contains useful engineering properties for the drilling engineer, including chemical, tensile and hardness properties,collapse resistance under axial load, and joint strength with combined internal pressure and bending. These are included for allsizes, grades and weights available from IPSCO. The format of this and other sections has been kept consistent permitting

easy reference.

Where available, API documents have been used for the data; however, many non-API sizes are used in Western Canada.Data for the non-API sizes was generated using IPSCO's in-house computer programs which are available should you beconsidering a design that utilizes non-standard weights and/or grades.


2/14

Group Grade Type HeatTreatment Carbon Nickel Copper Sulphur Silicon

1 H40 - None - - - 0.030 -J55 - None - - - 0.030 -IK55 - Q & T - - - 0.030 -N80 - Q & T - - - 0.030 -

2 L80 1 Q & T 0.43(1) 0.25 0.35 0.030 0.45

C95 - Q & T 0.45(2) - - 0.030 0.45

Grade

psi MPa psi MPa psi MPa HRc BHN

H40 40000 276 80000 552 60000 414 - -J55 55000 379 80000 552 75000 517 - -IK55 55000 379 90000 620 95000 655 - -N80 80000 552 110000 758 100000 689 - -

L80 80000 552 95000 655 95000 655 23 241C95 95000 655 110000 758 105000 724 - -

Notes:

-

minimum

3. IK55 is an IPSCO proprietary grade.

minimum maximum

0.030

0.0300.030

0.0300.0300.030

---

ManganeseAPI Chemical Requirements, % by weight maximums

Chemical, Tensile, and Hardness Requirements

Phosphorous

1.901.90

1. The carbon content for L80 may be increased to 0.50% maximum if the product is oil quenched.2. The carbon content for C95 may be increased to 0.55% maximum if the product is oil quenched.

maximum(5) Yield Strength Tensile Strength Hardness

API Tensile and Hardness Requirements

4. IK55 couplings are as-rolled API K55.5. In case of dispute , laboratory Rockwell C hardness tests shall be used as the referee method.6. From API Specification 5CT, Second Edition, November 1, 1989.


3/14

Grade Weight

Threads Wall Inside Drift Outside Collapse,and Thickness Diameter Diameter Diameter psi Pipe BodyCoupling, of Plain Buttress Yield Buttress Buttresslb per ft Coupling End Short Long Thread Strength Short Long Thread Short Long Thread

J55 9.50 0.205 4.090 3.965 5.000 3310 4380 4380 - - 152 101 - - 6230 - -10.50 0.224 4.052 3.927 5.000 4010 4790 4790 - 4790 165 132 - 203 7550 - 755011.60 0.250 4.000 3.875 5.000 4960 5350 5350 5350 5350 184 154 162 225 8300 8730 9350

IK55 9.50 0.205 4.090 3.965 5.000 3310 4380 4380 - - 152 112 - - 6230 - -10.50 0.224 4.052 3.927 5.000 4010 4790 4790 - 4790 165 146 - 249 7550 - 755011.60 0.250 4.000 3.875 5.000 4960 5350 5350 5350 5350 184 170 180 277 9150 9350 9350

IK70 11.60 0.250 4.000 3.875 5.000 5840 6810 - 6810 6810 234 - 206 285 - 11010 11010

L80 11.60 0.250 4.000 3.875 5.000 6350 7780 - 7780 7780 267 - 212 291 - 11420 11980

N80 11.60 0.250 4.000 3.875 5.000 6350 7780 - 7780 7780 267 - 223 304 - 11980 11980

C95 11.60 0.250 4.000 3.875 5.000 7030 9240 - 9240 9240 317 - 234 325 - 12600 13250

Dimensions and Minimum Performance Properties of IPSCO Casing

Imperial Units

Dimensions, inch

Burst, psiMinimum Internal Yield Pressure

Set Depth, feetPerformance Properties

Joint StrengthRound Thread

Tension, 1000 lbs

Round Thread Round Thread

4.500 inch

See notes on the final page of this section.


4/14

114.3mm

Grade Weight

Threads Wall Inside Drift Outside Collapse,and Thickness Diameter Diameter Diameter kPa Pipe BodyCoupling, of Plain Buttress Yield Buttress Buttresskg per m Coupling End Short Long Thread Strength Short Long Thread Short Long Thread

J55 14.14 5.21 103.9 100.7 127.0 22800 30200 30200 - - 67600 44900 - - 1900 - -15.63 5.69 102.9 99.7 127.0 27600 33000 33000 - 33000 73400 58700 - 90300 2300 - 230017.26 6.35 101.6 98.4 127.0 34200 36900 36900 36900 36900 81800 68500 72100 100100 2530 2660 2850

IK55 14.14 5.21 103.9 100.7 127.0 22800 30200 30200 - - 67600 49800 - - 1900 - -15.63 5.69 102.9 99.7 127.0 27600 33000 33000 - 33000 73400 64900 - 110800 2300 - 230017.26 6.35 101.6 98.4 127.0 34200 36900 36900 36900 36900 81800 75600 80100 123200 2790 2850 2850

IK70 17.26 6.35 101.6 98.4 127.0 40300 47000 - 47000 47000 104100 - 91600 126800 - 3360 3360

L80 17.26 6.35 101.6 98.4 127.0 43800 53600 - 53600 53600 118800 - 94300 129400 - 3480 3650

N80 17.26 6.35 101.6 98.4 127.0 43800 53600 - 53600 53600 118800 - 99200 135200 - 3650 3650

C95 17.26 6.35 101.6 98.4 127.0 48500 63700 - 63700 63700 141000 - 104100 144600 - 3840 4040

International Units


Dimensions, mm Performance Properties Set Depth, m

Burst, kPa Tension, daN

Round Thread


Minimum Internal Yield Pressure Joint StrengthRound Thread Round Thread


5/14

Grade Weight


J55 14.00 0.244 5.012 4.887 6.050 3120 4270 4270 - - 222 172 - - 5870 - -15.50 0.275 4.950 4.825 6.050 4040 4810 4810 4810 4810 248 202 217 300 7640 7640 764017.00 0.304 4.892 4.767 6.050 4910 5320 5320 5320 5320 273 229 247 329 8430 9090 928020.00 0.361 4.778 4.653 6.050 6610 6320 6320 6320 6180 320 282 304 387 8790 9480 10010

IK55 14.00 0.244 5.012 4.887 6.050 3120 4270 4270 - - 222 189 - - 5870 - -15.50 0.275 4.950 4.825 6.050 4040 4810 4810 4810 4810 248 222 239 366 7640 7640 764017.00 0.304 4.892 4.767 6.050 4910 5320 5320 5320 5320 273 252 272 402 9250 9280 928020.00 0.361 4.778 4.653 6.050 6610 6320 6320 6320 6180 320 310 334 472 9680 10010 10010

IK70 15.50 0.275 4.950 4.825 6.050 4660 6130 6130 6130 6130 316 256 276 380 8780 8780 878017.00 0.304 4.892 4.767 6.050 5780 6770 - 6770 6770 347 - 313 418 - 10900 1090020.00 0.361 4.778 4.653 6.050 7980 8040 - 8040 8040 408 - 386 491 - 12060 12750

L80 15.50 0.275 4.950 4.825 6.050 4990 7000 7000 7000 7000 361 279 298 389 9420 9420 9420 17.00 0.304 4.892 4.767 6.050 6280 7740 - 7740 7740 397 - 338 428 - 11840 1184020.00 0.361 4.778 4.653 6.050 8830 9190 - 9190 8990 466 - 416 503 - 12990 14570

N80 15.50 0.275 4.950 4.825 6.050 4990 7000 7000 7000 7000 361 284 306 406 9420 9420 9420 17.00 0.304 4.892 4.767 6.050 6280 7740 - 7740 7740 397 - 348 446 - 11840 1184020.00 0.361 4.778 4.653 6.050 8830 9190 - 9190 8990 466 - 428 524 - 13390 14570

C95 15.50 0.275 4.950 4.825 6.050 5380 8310 8310 8310 8310 429 324 329 436 10140 10140 10140

17.00 0.304 4.892 4.767 6.050 6940 9190 - 9190 9190 471 - 374 480 - 13060 1306020.00 0.361 4.778 4.653 6.050 10010 10910 - 10910 10680 554 - 460 563 - 14370 17290


Round ThreadRound Thread Round Thread

Set Depth, feet

Burst, psi Tension, 1000 lbsMinimum Internal Yield Pressure Joint Strength

Dimensions, inch Performance Properties

5.500 inchImperial Units



6/14

139.7 mm

Grade Weight

Threads Wall Inside Drift Outside Collapse,and Thickness Diameter Diameter Diameter kPa Pipe BodyCoupling, of Plain Buttress Yield Buttress Buttresskg per m Coupling End Short Long Thread Strength Short Long Thread Short Long Thread

J55 20.83 6.20 127.3 124.1 153.7 21500 29400 29400 - - 98800 76500 - - 1790 - -23.07 6.99 125.7 122.6 153.7 27900 33200 33200 33200 33200 110300 89900 96500 133400 2330 2330 233025.30 7.72 124.3 121.1 153.7 33900 36700 36700 36700 36700 121400 101900 109900 146300 2570 2770 283029.76 9.17 121.4 118.2 153.7 45600 43600 43600 43600 42600 142300 125400 135200 172100 2680 2890 3050

IK55 20.83 6.20 127.3 124.1 153.7 21500 29400 29400 - - 98800 84100 - - 1790 - -

23.07 6.99 125.7 122.6 153.7 27900 33200 33200 33200 33200 110300 98800 106300 162800 2330 2330 233025.30 7.72 124.3 121.1 153.7 33900 36700 36700 36700 36700 121400 112100 121000 178800 2820 2830 283029.76 9.17 121.4 118.2 153.7 45600 43600 43600 43600 42600 142300 137900 148600 210000 2950 3050 3050

IK70 23.07 6.99 125.7 122.6 153.7 32100 42300 42300 42300 42300 140600 113900 122800 169000 2680 2680 268025.30 7.72 124.3 121.1 153.7 39900 46700 - 46700 46700 154300 - 139200 185900 - 3320 332029.76 9.17 121.4 118.2 153.7 55000 55400 - 55400 55400 181500 - 171700 218400 - 3680 3890

L80 23.07 6.99 125.7 122.6 153.7 34400 48300 48300 48300 48300 160600 124100 132600 173000 2870 2870 2870 25.30 7.72 124.3 121.1 153.7 43300 53400 - 53400 53400 176600 - 150300 190400 - 3610 361029.76 9.17 121.4 118.2 153.7 60900 63400 - 63400 62000 207300 - 185000 223700 - 3960 4440

N80 23.07 6.99 125.7 122.6 153.7 34400 48300 48300 48300 48300 160600 126300 136100 180600 2870 2870 2870 25.30 7.72 124.3 121.1 153.7 43300 53400 - 53400 53400 176600 - 154800 198400 - 3610 361029.76 9.17 121.4 118.2 153.7 60900 63400 - 63400 62000 207300 - 190400 233100 - 4080 4440

C95 23.07 6.99 125.7 122.6 153.7 37100 57300 57300 57300 57300 190800 144100 146300 193900 3090 3090 3090

25.30 7.72 124.3 121.1 153.7 47800 63400 - 63400 63400 209500 - 166400 213500 - 3980 398029.76 9.17 121.4 118.2 153.7 69000 75200 - 75200 73600 246400 - 204600 250400 - 4380 5270


International Units



Tension, daNMinimum Internal Yield Pressure Joint Strength


Burst, kPa


7/14

Grade Weight


H40 17.00 0.231 6.538 6.413 7.656 1420 2310 2310 - - 196 122 - - 2690 - -20.00 0.272 6.456 6.331 7.656 1970 2720 2720 - - 230 176 - - 3710 - -

J55 20.00 0.272 6.456 6.331 7.656 2270 3740 3740 - - 316 234 - - 4300 - -23.00 0.317 6.366 6.241 7.656 3270 4360 4360 4360 4360 366 284 313 432 6170 6170 617026.00 0.362 6.276 6.151 7.656 4320 4980 4980 4980 4980 415 334 367 490 8040 8140 814029.00 0.408 6.184 6.059 7.656 5410 5610 5610 5610 5610 465 384 423 548 8270 9120 10010

IK55 20.00 0.272 6.456 6.331 7.656 2270 3740 3740 - - 316 254 - - 4300 - -23.00 0.317 6.366 6.241 7.656 3270 4360 4360 4360 4360 366 309 341 522 6170 6170 617026.00 0.362 6.276 6.151 7.656 4320 4980 4980 4980 4980 415 364 401 592 8140 8140 814029.00 0.408 6.184 6.059 7.656 5410 5610 5610 5610 5610 465 418 461 662 8990 9940 10010

IK70 20.00 0.272 6.456 6.331 7.656 2580 4760 4760 - - 402 297 - - 4860 - -23.00 0.317 6.366 6.241 7.656 3660 5550 - 5550 5550 466 - 397 548 - 6890 689026.00 0.362 6.276 6.151 7.656 5020 6340 - 6340 6340 528 - 467 621 - 9470 947029.00 0.408 6.184 6.059 7.656 6420 7140 - 7140 7140 591 - 537 695 - 11570 12100

L80 20.00 0.272 6.456 6.331 7.656 2740 5440 5440 - - 460 325 - - 5180 - -23.00 0.317 6.366 6.241 7.656 3830 6340 - 6340 6340 532 - 435 565 - 7220 722026.00 0.362 6.276 6.151 7.656 5410 7240 - 7240 7240 604 - 511 641 - 10200 1020029.00 0.408 6.184 6.059 7.656 7020 8160 - 8160 8160 676 - 587 718 - 12630 13220

N80 20.00 0.272 6.456 6.331 7.656 2740 5440 5440 - - 460 331 - - 5180 - -23.00 0.317 6.366 6.241 7.656 3830 6340 - 6340 6340 532 - 442 588 - 7220 722026.00 0.362 6.276 6.151 7.656 5410 7240 - 7240 7240 604 - 519 667 - 10200 1020029.00 0.408 6.184 6.059 7.656 7020 8160 - 8160 8160 676 - 597 746 - 12860 13220

C95 20.00 0.272 6.456 6.331 7.656 2900 6460 6460 - - 546 378 - - 5480 - -23.00 0.317 6.366 6.241 7.656 4140 7530 - 7530 7530 632 - 505 636 - 7810 781026.00 0.362 6.276 6.151 7.656 5880 8600 - 8600 8600 717 - 593 722 - 11090 1109029.00 0.408 6.184 6.059 7.656 7830 9690 - 9520 9690 803 - 683 808 - 14700 14760


Dimensions, inch Performance Properties Set Depth, feet


Burst, psi Tension, 1000 lbsMinimum Internal Yield Pressure Joint Strength




8/14

177.8 mm

Grade WeightThreads Wall Inside Drift Outside Collapse,

and Thickness Diameter Diameter Diameter kPa Pipe BodyCoupling, of Plain Buttress Yield Buttress Buttresskg per m Coupling End Short Long Thread Strength Short Long Thread Short Long Thread

H40 25.30 5.87 166.1 162.9 194.5 9800 15900 15900 - - 87200 54300 - - 820 - -29.76 6.91 164.0 160.8 194.5 13600 18800 18800 - - 102300 78300 - - 1130 - -

J55 29.76 6.91 164.0 160.8 194.5 15700 25800 25800 - - 140600 104100 - - 1310 - -34.23 8.05 161.7 158.5 194.5 22500 30100 30100 30100 30100 162800 126300 139200 192200 1880 1880 188038.69 9.19 159.4 156.2 194.5 29800 34300 34300 34300 34300 184600 148600 163200 218000 2450 2480 248043.16 10.36 157.1 153.9 194.5 37300 38700 38700 38700 38700 206800 170800 188200 243800 2520 2780 3050

IK55 29.76 6.91 164.0 160.8 194.5 15700 25800 25800 - - 140600 113000 - - 1310 - -34.23 8.05 161.7 158.5 194.5 22500 30100 30100 30100 30100 162800 137500 151700 232200 1880 1880 188038.69 9.19 159.4 156.2 194.5 29800 34300 34300 34300 34300 184600 161900 178400 263300 2480 2480 248043.16 10.36 157.1 153.9 194.5 37300 38700 38700 38700 38700 206800 185900 205100 294500 2740 3030 3050

IK70 29.76 6.91 164.0 160.8 194.5 17800 32800 32800 - - 178800 132100 - - 1480 - -

34.23 8.05 161.7 158.5 194.5 25200 38300 - 38300 38300 207300 - 176600 243800 - 2100 210038.69 9.19 159.4 156.2 194.5 34600 43700 - 43700 43700 234900 - 207700 276200 - 2890 289043.16 10.36 157.1 153.9 194.5 44300 49200 - 49200 49200 262900 - 238900 309100 - 3530 3690

L80 29.76 6.91 164.0 160.8 194.5 18900 37500 37500 - - 204600 144600 - - 1580 - -34.23 8.05 161.7 158.5 194.5 26400 43700 - 43700 43700 236600 - 193500 251300 - 2200 220038.69 9.19 159.4 156.2 194.5 37300 49900 - 49900 49900 268700 - 227300 285100 - 3110 311043.16 10.36 157.1 153.9 194.5 48400 56300 - 56300 56300 300700 - 261100 319400 - 3850 4030

N80 29.76 6.91 164.0 160.8 194.5 18900 37500 37500 - - 204600 147200 - - 1580 - -34.23 8.05 161.7 158.5 194.5 26400 43700 - 43700 43700 236600 - 196600 261600 - 2200 220038.69 9.19 159.4 156.2 194.5 37300 49900 - 49900 49900 268700 - 230900 296700 - 3110 311043.16 10.36 157.1 153.9 194.5 48400 56300 - 56300 56300 300700 - 265600 331800 - 3920 4030

C95 29.76 6.91 164.0 160.8 194.5 20000 44500 44500 - - 242900 168100 - - 1670 - -34.23 8.05 161.7 158.5 194.5 28500 51900 - 51900 51900 281100 - 224600 282900 - 2380 238038.69 9.19 159.4 156.2 194.5 40500 59300 - 59300 59300 318900 - 263800 321200 - 3380 338043.16 10.36 157.1 153.9 194.5 54000 66800 - 65600 66800 357200 - 303800 359400 - 4480 4500

International Units


Round Thread Round Thread Round Thread

Burst, kPa Tension, daN


Joint Strength


Minimum Internal Yield Pressure


9/14


and Thickness Diameter Diameter Diameter psi Pipe BodyCoupling, of Plain Buttress Yield Buttress Buttresslb per ft Coupling End Short Long Thread Strength Short Long Thread Short Long Thread

H40 28.00 0.304 8.017 7.892 9.625 1610 2470 2470 - - 318 233 - - 3050 - -32.00 0.352 7.921 7.796 9.625 2200 2860 2860 - - 366 279 - - 4170 - -

J55 24.00 0.264 8.097 7.972 9.625 1370 2950 2950 - - 381 244 - - 2560 - -28.00 0.304 8.017 7.892 9.625 1880 3390 3390 3390 3390 437 311 348 503 3540 3540 3540

32.00 0.352 7.921 7.796 9.625 2530 3930 3930 3930 3930 503 372 417 579 4760 4760 476036.00 0.400 7.825 7.700 9.625 3450 4460 4460 4460 4460 568 434 486 654 6500 6500 6500

IK55 24.00 0.264 8.097 7.972 9.625 1370 2950 2950 - - 381 263 - - 2560 - -28.00 0.304 8.017 7.892 9.625 1880 3390 3390 3390 3390 437 336 377 599 3540 3540 3540

32.00 0.352 7.921 7.796 9.625 2530 3930 3930 3930 3930 503 402 452 690 4760 4760 476036.00 0.400 7.825 7.700 9.625 3450 4460 4460 4460 4460 568 468 526 780 6500 6500 650040.00 0.450 7.725 7.600 9.625 4400 5020 5020 5020 5020 636 536 603 872 8300 8300 8300

IK70 36.00 0.400 7.825 7.700 9.625 3890 5680 - 5680 5680 724 - 617 830 - 7330 733040.00 0.450 7.725 7.600 9.625 5120 6390 - 6390 6390 809 - 707 928 - 9650 9650

L80 36.00 0.400 7.825 7.700 9.625 4100 6490 - 6490 6490 827 - 678 864 - 7740 774040.00 0.450 7.725 7.600 9.625 5520 7300 - 7300 7300 925 - 776 966 - 10430 10430

N80 36.00 0.400 7.825 7.700 9.625 4100 6490 - 6490 6490 827 - 688 895 - 7740 774040.00 0.450 7.725 7.600 9.625 5520 7300 - 7300 7300 925 - 788 1001 - 10430 10430

C95 36.00 0.400 7.825 7.700 9.625 4350 7710 - 7710 7710 982 - 789 976 - 8200 820040.00 0.450 7.725 7.600 9.625 6020 8670 - 8670 8670 1098 - 904 1092 - 11350 11350

Set Depth, feetBurst, psi Tension, 1000 lbs

Round Thread

Dimensions, inch Performance Properties


Round ThreadMinimum Internal Yield Pressure Joint Strength

Round Thread




10/14

219.1 mm



H40 41.67 7.72 203.6 200.5 244.5 11100 17000 17000 - - 141500 103600 - - 930 - -47.62 8.94 201.2 198.0 244.5 15200 19700 19700 - - 162800 124100 - - 1270 - -

J55 35.72 6.71 205.7 202.5 244.5 9400 20300 20300 - - 169500 108500 - - 780 - -41.67 7.72 203.6 200.5 244.5 13000 23400 23400 23400 23400 194400 138300 154800 223700 1080 1080 1080

47.62 8.94 201.2 198.0 244.5 17400 27100 27100 27100 27100 223700 165500 185500 257600 1450 1450 145053.57 10.16 198.8 195.6 244.5 23800 30800 30800 30800 30800 252700 193100 216200 290900 1980 1980 1980

IK55 35.72 6.71 205.7 202.5 244.5 9400 20300 20300 - - 169500 117000 - - 780 - -41.67 7.72 203.6 200.5 244.5 13000 23400 23400 23400 23400 194400 149500 167700 266400 1080 1080 1080

47.62 8.94 201.2 198.0 244.5 17400 27100 27100 27100 27100 223700 178800 201100 306900 1450 1450 145053.57 10.16 198.8 195.6 244.5 23800 30800 30800 30800 30800 252700 208200 234000 347000 1980 1980 198059.53 11.43 196.2 193.0 244.5 30300 34600 34600 34600 34600 282900 238400 268200 387900 2530 2530 2530

IK70 53.57 10.16 198.8 195.6 244.5 26800 39200 - 39200 39200 322000 - 274400 369200 - 2230 223059.53 11.43 196.2 193.0 244.5 35300 44100 - 44100 44100 359800 - 314500 412800 - 2940 2940

L80 53.57 10.16 198.8 195.6 244.5 28300 44700 - 44700 44700 367900 - 301600 384300 - 2360 236059.53 11.43 196.2 193.0 244.5 38100 50300 - 50300 50300 411500 - 345200 429700 - 3180 3180

N80 53.57 10.16 198.8 195.6 244.5 28300 44700 - 44700 44700 367900 - 306000 398100 - 2360 236059.53 11.43 196.2 193.0 244.5 38100 50300 - 50300 50300 411500 - 350500 445300 - 3180 3180

C95 53.57 10.16 198.8 195.6 244.5 30000 53200 - 53200 53200 436800 - 351000 434100 - 2500 250059.53 11.43 196.2 193.0 244.5 41500 59800 - 59800 59800 488400 - 402100 485700 - 3460 3460


Dimensions, mm

Joint Strength

Performance Properties Set Depth, mBurst, kPa Tension, daN

International Units

Round ThreadRound Thread Round ThreadMinimum Internal Yield Pressure



11/14



H40 32.30 0.312 9.001 8.845 10.625 1370 2270 2270 - - 365 254 - - 2560 - -

J55 36.00 0.352 8.921 8.765 10.625 2020 3520 3520 3520 3520 564 394 453 639 3810 3810 381040.00 0.395 8.835 8.679 10.625 2570 3950 3950 3950 3950 630 452 520 714 4860 4860 4860

IK55 36.00 0.352 8.921 8.765 10.625 2020 3520 3520 3520 3520 564 423 489 755 3810 3810 381040.00 0.395 8.835 8.679 10.625 2570 3950 3950 3950 3950 630 486 561 843 4860 4860 4860

IK70 36.00 0.352 8.921 8.765 10.625 2260 4480 - 4480 4480 718 - 576 811 - 4260 426040.00 0.395 8.835 8.679 10.625 2880 5030 - 5030 5030 802 - 661 906 - 5430 543043.50 0.435 8.755 8.599 10.625 3640 5540 - 5540 5540 879 - 739 993 - 6850 685047.00 0.472 8.681 8.525 10.625 4450 6010 - 6010 6010 950 - 811 1073 - 8400 8400

L80 36.00 0.352 8.921 8.765 10.625 2370 5120 - 5120 5120 820 634 848 - 4460 4460

40.00 0.395 8.835 8.679 10.625 3090 5750 - 5750 5750 916 - 727 947 - 5840 584043.50 0.435 8.755 8.599 10.625 3810 6330 - 6330 6330 1005 - 813 1038 - 7190 719047.00 0.472 8.681 8.525 10.625 4760 6870 - 6870 6870 1086 - 893 1122 - 8960 8960

N80 36.00 0.352 8.921 8.765 10.625 2370 5120 - 5120 5120 820 643 877 - 4460 4460 40.00 0.395 8.835 8.679 10.625 3090 5750 - 5750 5750 916 - 737 979 - 5840 584043.50 0.435 8.755 8.599 10.625 3810 6330 - 6330 6330 1005 - 825 1074 - 7190 719047.00 0.472 8.681 8.525 10.625 4760 6870 - 6870 6870 1086 - 905 1161 - 8960 8960

C95 36.00 0.352 8.921 8.765 10.625 2460 6080 - 6080 6080 974 738 962 - 4660 4660 40.00 0.395 8.835 8.679 10.625 3320 6820 - 6820 6820 1088 - 847 1074 - 6270 627043.50 0.435 8.755 8.599 10.625 4120 7510 - 7510 7510 1193 - 948 1178 - 7780 778047.00 0.472 8.681 8.525 10.625 5090 8150 - 8150 8150 1289 - 1040 1273 - 9610 9610

Dimensions, inch Performance Properties Set Depth, feetBurst, psi Tension, 1000 lbs

Minimum Internal Yield Pressure Joint Strength


Round Thread





12/14

244.5 mm



H40 48.07 7.92 228.6 224.7 269.9 9400 15700 15700 - - 162400 113000 - - 780 - -

J55 53.57 8.94 226.6 222.6 269.9 13900 24300 24300 24300 24300 250900 175300 201500 284200 1160 1160 116059.53 10.03 224.4 220.4 269.9 17700 27200 27200 27200 27200 280200 201100 231300 317600 1480 1480 1480

IK55 53.57 8.94 226.6 222.6 269.9 13900 24300 24300 24300 24300 250900 188200 217500 335800 1160 1160 116059.53 10.03 224.4 220.4 269.9 17700 27200 27200 27200 27200 280200 216200 249500 375000 1480 1480 1480

IK70 53.57 8.94 226.6 222.6 269.9 15600 30900 - 30900 30900 319400 - 256200 360700 - 1300 130059.53 10.03 224.4 220.4 269.9 19900 34700 - 34700 34700 356700 - 294000 403000 - 1660 166064.74 11.05 222.4 218.4 269.9 25100 38200 - 38200 38200 391000 - 328700 441700 - 2090 209069.94 11.99 220.5 216.5 269.9 30700 41400 - 41400 41400 422600 - 360700 477300 - 2560 2560

L80 53.57 8.94 226.6 222.6 269.9 16300 35300 - 35300 35300 364800 - 282000 377200 - 1360 1360

59.53 10.03 224.4 220.4 269.9 21300 39600 - 39600 39600 407500 - 323400 421200 - 1780 178064.74 11.05 222.4 218.4 269.9 26300 43600 - 43600 43600 447000 - 361600 461700 - 2190 219069.94 11.99 220.5 216.5 269.9 32800 47400 - 47400 47400 483100 - 397200 499100 - 2730 2730

N80 53.57 8.94 226.6 222.6 269.9 16300 35300 - 35300 35300 364800 - 286000 390100 - 1360 1360 59.53 10.03 224.4 220.4 269.9 21300 39600 - 39600 39600 407500 - 327800 435500 - 1780 178064.74 11.05 222.4 218.4 269.9 26300 43600 - 43600 43600 447000 - 367000 477700 - 2190 219069.94 11.99 220.5 216.5 269.9 32800 47400 - 47400 47400 483100 - 402600 516400 - 2730 2730

C95 53.57 8.94 226.6 222.6 269.9 17000 41900 - 41900 41900 433300 - 328300 427900 - 1420 1420 59.53 10.03 224.4 220.4 269.9 22900 47000 - 47000 47000 484000 - 376800 477700 - 1910 191064.74 11.05 222.4 218.4 269.9 28400 51800 - 51800 51800 530700 - 421700 524000 - 2370 237069.94 11.99 220.5 216.5 269.9 35100 56200 - 56200 56200 573400 - 462600 566300 - 2930 2930


International Units

Tension, daNMinimum Internal Yield Pressure Joint Strength

Burst, kPa




Round Thread


13/14



H40 32.75 0.279 10.192 10.036 11.750 840 1820 1820 - - 367 205 - - 1570 - -40.50 0.350 10.050 9.894 11.750 1390 2280 2280 - - 457 314 - - 2620 - -

J55 40.50 0.350 10.050 9.894 11.750 1580 3130 3130 - 3130 629 420 - 700 2990 - 299045.50 0.400 9.950 9.794 11.750 2090 3580 3580 - 3580 715 493 - 796 3940 - 394051.00 0.450 9.850 9.694 11.750 2700 4030 4030 - 4030 801 565 - 891 5090 - 5090

IK55 40.50 0.350 10.050 9.894 11.750 1580 3130 3130 - 3130 629 450 - 819 2990 - 299045.50 0.400 9.950 9.794 11.750 2090 3580 3580 - 3580 715 528 - 931 3940 - 394051.00 0.450 9.850 9.694 11.750 2700 4030 4030 - 4030 801 606 - 1043 5090 - 5090

IK70 51.00 0.450 9.850 9.694 11.750 3000 5130 5130 - 5130 1019 718 - 1131 5650 - 565055.50 0.495 9.760 9.604 11.750 3820 5640 5640 - 5640 1116 800 - 1239 7200 - 7200

L80 51.00 0.450 9.850 9.694 11.750 3220 5860 5860 - 5860 1165 794 - 1190 6070 - 607055.50 0.495 9.760 9.604 11.750 4020 6450 6450 - 6450 1276 884 - 1303 7580 - 7580

N80 51.00 0.450 9.850 9.694 11.750 3220 5860 5860 - 5860 1165 804 - 1228 6070 - 607055.50 0.495 9.760 9.604 11.750 4020 6450 6450 - 6450 1276 895 - 1345 7580 - 7580

C95 51.00 0.450 9.850 9.694 11.750 3480 6960 6880 - 6960 1383 927 - 1354 6560 - 656055.50 0.495 9.760 9.604 11.750 4290 7660 6880 - 7450 1515 1032 - 1483 8100 - 8100

Dimensions, inch Performance Properties Set Depth, feet


Joint Strength


Tension, 1000 lbsBurst, psiMinimum Internal Yield Pressure



Round Thread


14/14

273.1 mm



H40 48.74 7.09 258.9 254.9 298.5 5800 12500 12500 - - 163200 91200 - - 480 - -60.27 8.89 255.3 251.3 298.5 9600 15700 15700 - - 203300 139700 - - 800 - -

J55 60.27 8.89 255.3 251.3 298.5 10900 21600 21600 - 21600 279800 186800 - 311400 910 - 91067.71 10.16 252.7 248.8 298.5 14400 24700 24700 - 24700 318000 219300 - 354100 1200 - 120075.90 11.43 250.2 246.2 298.5 18600 27800 27800 - 27800 356300 251300 - 396300 1550 - 1550

IK55 60.27 8.89 255.3 251.3 298.5 10900 21600 21600 - 21600 279800 200200 - 364300 910 - 91067.71 10.16 252.7 248.8 298.5 14400 24700 24700 - 24700 318000 234900 - 414100 1200 - 120075.90 11.43 250.2 246.2 298.5 18600 27800 27800 - 27800 356300 269600 - 463900 1550 - 1550

IK70 75.90 11.43 250.2 246.2 298.5 20700 35400 35400 - 35400 453300 319400 - 503100 1720 - 172082.59 12.57 247.9 243.9 298.5 26300 38900 38900 - 38900 496400 355800 - 551100 2190 - 2190

L80 75.90 11.43 250.2 246.2 298.5 22200 40400 40400 - 40400 518200 353200 - 529300 1850 - 185082.59 12.57 247.9 243.9 298.5 27700 44500 44500 - 44500 567600 393200 - 579600 2310 - 2310

N80 75.90 11.43 250.2 246.2 298.5 22200 40400 40400 - 40400 518200 357600 - 546200 1850 - 185082.59 12.57 247.9 243.9 298.5 27700 44500 44500 - 44500 567600 398100 - 598300 2310 - 2310

C95 75.90 11.43 250.2 246.2 298.5 24000 48000 47400 - 48000 615200 412400 - 602300 2000 - 200082.59 12.57 247.9 243.9 298.5 29600 52800 47400 - 51400 673900 459100 - 659700 2470 - 2470

Notes:


International Units



Burst, kPa Tension, daNMinimum Internal Yield Pressure Joint Strength

Round Thread

(0.49 psi/ft), and safety factors of 1.0, 1.0 and 1.6 respectively for collapse, burst and tension.

1. Performance properties of IK55 are equal to those of API K55.2. Shaded items are commonly stocked.3. Inquire with IPSCO for items not shown.4. Data from API Bulletin 5C2, Twentieth Edition, May 31, 1987.5. Data in italics is for non-API sizes and was computed using API Bulletin 5C3, Fifth Edition, July 1989.6. Vertical set depths were computed using collapse and burst gradients of 12 kPa/m (0.53 psi/ft) and 11 kPa/m

Tubular Product Manual Oct g Casing Properties

Documents

Transcript of Tubular Product Manual Oct g Casing Properties