TT Series 51, GBFFEATURES

GENERAL PUMPA member of the Interpump Group

TRIP

LEX

TRIP

LEX

• Forged brass manifold with exclusive lifetime warranty

• Die-cast annodized aluminum, oil-bath crankcase

• Solid ceramic plungers with continuously lubricated packings

• The original Interpump unitized, stainless steel, K01 inlet and outlet valves • Ideal for all general cleaning applications

• Comes standard with SAE J609 gasoline engine mounting flange

• Also available in “L” left-handed versions

DIMENSIONAL DRAWING

SPECIFICATIONS

Triplex Plunger Pumps

Pump Model TT9061GBF TT9071GBF TT1540GBF TT2028GBF TT2035GBFMaximum Volume 2.11 GPM 2.8 GPM 4.0 GPM 2.8 GPM 3.5 GPMMaximum Discharge Pressure 1500 PSI 2000 PSIMaximum Pump Speed 3400 RPMMaximum Inlet Pressure 125 PSIMaximum Inlet Vacuum 3 ft. Water (2.6 in. Hg)Bore .591 in. / 15 mmStroke .197 in/5mm .260 in./6.6 mm .370 in./9.4 mm .260 in./6.6 mm .315 in./8 mmCrankcase Oil Capacity 11.2 oz.Maximum Fluid Temperature 1650 FInlet Port Thread 38”-19 BSPP-FDischarge Port Thread 1/4”-19 BSPP-FShaft Diameter 3/4 in. / 19 mmWeight 11.4 lbs.Dimensions 7.2” x 7.2” x 5.5”

8

Ref 300225 Rev E11-08

PARTS LIST

REPAIR KITS

ITEM PART NO. DESCRIPTION KIT NO. QTY.1. 51010622 Crankcase 1 2. 98210000 Plug, 3/8-BSPP 23. 90383300 O-ring, .549 x .103 14. 51209102 Protector 15. 90156500 Oil Seal 83 36. 98204100 Plug 17. 51120041 Manifold, Brass 1 51120022 Manifold, Aluminum 18. 96693800 Washer, M6.4, Schnorr 129. 99194300 Screw, M6 x 40 1210. 90384100 O-ring, .674 x .103 1 611. 36200366 Valve Seat 1 612. 36200176 Valve Plate 1 613. 94737600 Spring 1 614. 36200251 Valve Cage 1 615. 90384700 O-ring, .797 x .103 84 616. 98221800 Valve Cap 84 6

ITEM PART NO. DESCRIPTION KIT NO. QTY.17. 36703201 Valve Assembly 1 618. 51100051 Head Ring 96, 97 319. 90262000 Packing 96, 97 320. 51080070 Packing Retainer 86, 96 321. 90360400 O-ring, .989 x .070 86, 96, 97 322. 90383500 O-ring, .594 x .103 86, 96, 97 323. 97596800 Sight Gauge 124. 91801500 Needle Bearing 1 25. 98210300 Oil Dip Stick 1 26. 92221600 Nut, M8 3 27. 96700800 Washer, M8 3 28. 51040009 Plunger, 15 mm 329. 90357200 O-ring, .208 x .070 3 30. 90502200 Back-up Ring 3 31. 96707000 Washer, Flinger 3 32. 97371000 Connecting Rod Pin 3 33. 51160022 Crankcase Cover 134. 99186700 Screw 4

ITEM PART NO. DESCRIPTION KIT NO. QTY.35. 90391700 O-ring 1 36. 51030022 Connecting Rod 3 37. 51050056 Piston Guide 3 38. 99273000 Screw, 5/16 4 39. 96701400 Washer, M8.4, Schnorr 4 40. 99186700 Screw, M8 x 18 4 41. 96693800 Washer, 6.4, Schnorr 442. 10034622 Flange 1 43. 50211551 Spacer 1 44. 90409700 O-ring, 2.187 x .139 1 45. 90164400 Oil Seal 1 46. 90066700 Snap Ring 1 47. 20283521 Bearing 1 48. 51021035 Crankshaft (TT9061) 1 51021165 Crankshaft (TT9071, TT2028) 1 51021965 Crankshaft (TT1540) 1 51021835 Crankshaft (TT2035) 1

TT Series 51, GBF GENERAL PUMPA member of the Interpump Group

KIT NO. 1 83 84 86 96 97

ITEM NO’sINCLUDED INKIT

10, 11, 12,6, 7, 8(17)

5 15, 16 20, 21, 2218, 19, 20, 21,22

18, 19,21, 22

NUMBER OFASSEMBLIESIN KIT

6 3 6 3 1 3

NUMBER OFCYLINDERSKIT WILLSERVICE

3 3 3 3 1 3

* Decrease torque by 20%if threads are lubricated

TORQUE SPECS*

Ref 300225 Rev E11-08

Position Ft. Lbs.2 29.46 14.79 8.816 33.123 13.226 11.034 7.338 22.140 7.349 14.752 7.3

GENERAL PUMP 1174 Northland Drive • Mendota Heights, MN 55120Phone: (651)686-2199 • Fax: (800)535-1745 • e-mail: sales@gpcompanies.com • www.generalpump.com

TT 51 Series, U, UI ManifoldsA

CC

ESSO

RIE

SA

CC

ESSO

RIE

SGENERAL PUMP A member of the Interpump Group

PARTS LIST

8General Pumpis a member ofthe Interpump Group

GENERAL PUMP • 1174 Northland Drive • Mendota Heights, MN 55120Phone: (651)686-2199 • Fax: (800)535-1745 • email: sales@gpcompanies.com • www.generalpump.com

Ref 300224 Rev E06-14

FEATURES• Features a built-in unloader, with optional chemical injector and optional inlet fitting

• Available in aluminum, (1300 PSI maximum) or brass (1500 PSI maximum)

General Pump recommends using a safety relief device in conjuntion with this unloader valve when installed on a positive displacement pump. General Pumpis not liable and assumes no responsibility for this valve when used in a customer’shigh pressure system.

NO. PART NO. DESC. QTY1. 36318751 Knob 12. 92221800 Nut 13. 99305400 Screw 14. 701019 O-ring 15. 36318570 Press Regulator 16. 36318970 Seat 17. 94743600 Spring 18.† 36318470 Bushing 19.† 701002 O-ring 110.† 36318870 Stopper 111.† 94733200 Spring 112.† 90357500 O-ring 313.† 36333151 Shutter 114.† 90506500 Anti-ext. Ring 315.† 701614 O-ring 216.† 36318970 Control Piston 117.† 90502500 Anti-ext. Ring 118.† 36316570 Valve Guide 119.† 701014 O-ring 120.† 90507500 Anti-ext. Ring 121.† 36319066 Valve 122.† 99150900 Screw 123.† 36316466 Valve Seat 124.* 90383200 O-ring 125. 10007870 Fitting, 3/4 BSPP 1

10014770 Fitting, M2210031870 Fitting, 3/8 NPT

NO. PART NO. DESC. QTY26. 98204100 Cap, 1/4BSPP 1

90210000 Cap, 3/8 BSPP27. 55120022 Manifold, Alum. 1

55120141 Manifold, Brass28. 98205700 Cap 129. 98204100 Cap 1OPTIONAL33.†* 701614 O-ring 134. 10015166 Nozzle, 2.0mm 1

10007666 Nozzle, 2.2mm35.* 701012 O-ring 136.* 94821700 Spring 137.* 97478200 Ball 138.* 701501 O-ring 139.* 94738300 Spring 140.* 701612 O-ring 141. 36318151 Body 142.* 701013 O-ring 143. 36256370 Valve Seat 144. 36256470 Shutter 145. 36256551 Knob 146.* 701008 O-ring 147. 36256670 Coupling 1OPTIONAL50. 701115 O-ring 151. 680006 Inlet Fitting 152. 700004 Filter Washer 1

KIT NO. K94 K102

ITEM NUMBERSINCLUDED IN KIT

24, 33, 35, 36, 37, 38, 39,40, 42, 46

8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20,

21, 22, 23, 33

QTY. 1 1