Aspect-oriented and Component Adaptation for Software Product Lines
TSP100ECO During the design and development of this product, Star has worked on every aspect of the...
-
Upload
preston-shetley -
Category
Documents
-
view
213 -
download
0
Transcript of TSP100ECO During the design and development of this product, Star has worked on every aspect of the...
TSP100ECO
TSP100ECO
Star Environmental
STAR MICRONICS ECOLOGICAL INITIATIVE
PRODUCT CONCEPT
During the design and development of this product, Star has worked on every
aspect of the product life cycle from its manufacturing… An Advanced ECO Engineered Product
– Reduction in power consumption• Power consumption reduced during operation (Star Technology)• Power consumption reduction during non- operation (Energy Star)
– Due to its low energy consumption while idle it has been Energy Star Certified
– Less than 0.05 Watts in idle state– Materials of TSP100ECO
• Housing uses Environmental Friendly materials– Manufacturing of Printer
• Factory has reduction of Greenhouse Gas emissions• Star Micronics purchase of Carbon Offset Credits
To its field use and finally to its waste management Product Efficiency
– Reduce blank space (top margin)– Reduce length of receipt– Reduce paper width
NEW Packaging – Use of recyclable material
AN ADVANCED ECO ENGINEERED PRODUCT
Reduction in Power Consumption
The TSP100ECO satisfies the Low Power
Consumption Level for ENERGY STAR.
Less than 0.05 Watts in idle state
The power consumption at “Print Ready Mode” on
TSP100ECO is only 0.76 [W]!* Reference : TSP100U = 3.2
[W]
System Check Mode 1.8W
Print Ready Mode 0.76W
USB Plug In
Printing 34.0W
Yes
No
Is Host Powered OFF?
Yes
Is Host Powered ON?No
Yes
No
System Off Mode 0.05W
System Check Mode 1.8W1
* Not Zero Power Consumption
After 5 seconds
0.3 - 0.5 seconds
0.2 seconds
Power-Saving Mode Transition Diagram
* Rolling ASCII Print*
Reduction in Power Consumption
Through Power Management
AN ADVANCED ECO ENGINEERED PRODUCT
Print Signal?
Reduction in Power Consumption
TSP100ECO vs. CompetitionConditions
[TIME] 24 hours/day [Cycle]7 days/Week
[Receipt Qty] 300 receipts/day [Length of Receipt]150 mm
PrinterTSP100ECO TSP143U TM-T88IV HSP7000 TM-H6000III
+PS-180 +PS60A-24B +PS-180
Power Consumption kWh 36.7 143.5 61.4 151.2 136.1
CO2 CO2 Emission kg 15.4 60.3 25.8 63.5 57.2
TSP100ECO
TSP143U
TM-T88IV+PS-180
HSP7000+PS60A-24B
TM-H6000III+PS-180
36.7
143.5
61.4
151.2
136.1
Power Consumption (kWh)- (For 5 Years)
150
mm
[Note] CO2 calculation methods are different among countries.
In this table, it is calculated by Japanese method.
AN ADVANCED ECO ENGINEERED PRODUCT
Modification of Printer HousingThe Printer Housing of the new TSP100ECO is made of Polymer Alloy, a compound manufactured from Polystyrene (PS) and Polyphenylene Ether (PPE)
Environmental Significance Halogen-free ⇒ Reduction of Environmental Impact
No more Dioxin emission during the manufacturing process
Made with 10% of recycled material ( PS ) ⇒ Conservation of Resources
Light Resistance ⇒ no more color fading
New Housing Material to stress the emphasis of Star’s Environmental Consideration for use of Halogen-Free and
Recycled Material in the TSP100ECO printer.
AN ADVANCED ECO ENGINEERED PRODUCT
Reduce Blank space• Capability of changing the top margin from 11mm to 3mm in 1mm
increments (default setting is 3mm)• With Partial Cut only using back feed
Savings on Paper Consumption
11 mm 3 mm
PRODUCT EFFICIENCY
PRODUCT EFFICIENCY
75 %
Com
pre
ss
50 %
Com
pre
ss50
% C
omp
ress
67 % Compress
100
%
Paper Saving of 50% when utilizing vertical 50% compression
Paper Saving increased when using 3mm top margin + vertical 50% compression
Paper Saving increased additional 33% when using 53mm paper from 80mm paper
Capability of Vertical and Horizontal Receipt Compression• Vertical : 100% · 75% · 50%• Horizontal : 100% · 67%
PRODUCT EFFICIENCY
Configuration Utililtyo Eco Settings
• Scaling (Compress)• Horizontal• Vertical
• Top Margin• 11mm to 3mm
Capability to Choose if a Receipt is to
be printed
If yes, the receipt is printed
If no, the receipt is not printed, BUT the
Receipt can be saved in the PC Hard Drive
This function is available with OPOS
and JavaPOS for Windows, as well.
Instant paper savings when thereceipt is not printed!
PRODUCT EFFICIENCY
PRODUCT EFFICIENCY
Configuration Utililtyo Eco Settings
• “On Demand”
ECO Analysis ToolUsers can simulate Money-Save-Effect by paper saving.* This tool is only for calculation of Paper Savings, not for Power Savings, as the “Money-Savings-Effect” by Power Savings may be perceived as small.
* Working daysDefault :
365
* Receipts per dayMax :
10,000
* Receipt Length Max :
1,000 mm
* Monetary Unit
JPY
USD
HKD
MYR
CNY
GBP
EUR
AUD
* Top margin 3 to 11
mm
* Paper width used 58 or 80
mm
* Receipt length reduction
Original25%
reduction50%
reduction
How many receipts do you print and just how much paper could you save?
PRODUCT EFFICIENCY
14
SAMPLE PAPER ROLL 80mm
6 FT. POWER CABLE
• USB CABLE• VERTICAL MOUNT ACCESSORY• 58 MM ROLL PAPER GUIDE • UPPER GUIDE
WALL BRACKET KIT
NEW PACKAGING
INSTALLATION CD and FUTUREPRNT software
ALL IN ONE BOX!
FUTUREPRNT SOFTWARE INCLUDED
WHQL Certified - Certified by Microsoft® for effortless installation
ESC/POS™ Emulation - Easy drop-in replacement
2D Bar Code Printing - 2D bar codes store more information than traditional
1D types and replicate the data multiple times for better scanning reliability.
QR Code is supported.
Maintenance Counter Status - Keep track of how many times the auto cutter
has cut and the distance that the print head has printed for hardware
performance measurable
Two Color Printing Capability - Highlight important information
Logo Utility - Store logos and other graphics for professional receipt branding
Memory Switch Utility - Fine-tune your print outs or print in different
languages by enabling, changing, or disabling certain settings
CARBON OFFSET
For every TSP100ECO printer manufactured, Star Micronics purchased Carbone Emission Credit equal to the printer manufacturing and operation for the first 5 years.
“Carbon offsetting is the act of counterbalancing unavoidable CO2 emissions from your daily life or economic activities by supporting the CO2 reduction projects conducted globally”
Amount of CO2 Offset per unit: Total 33.9 kg / unit(* From Manufacturing & disposal process : 11.9 Kg / From Power consumption for 5 years : 22.0 kg)
CO2 OFFSET PROCESS
TSP100ECO USER PARTICIPATIONIN CO2 REDUCTION CAMPAIGN
FOR the END USER TO Display to their customers – they are participating inSAVING the ENVIRONMENT
TSP100II VS TSP100
Printer Speed is now 28RPM from 22 RPM
TSP100ECO available with CUTTER (Partial Cut only)
NO TEAR BAR VERSION
PUTTY OR CHARCOAL GRAY COLOR
USB INTERFACE
Best product e
ver needs th
e
best warra
nty ever!
First y
ear has a Swap-A-Star
+ 4 year full w
arranty (c
utter
and Print h
ead included)
TSP100II VS TSP100
Warranty on the TSP100ECOFull 3 Year Warranty (Print Head & Cutter included)
Complimentary Swap-A-Star on 1st Year
Complimentary Extend-A-Star on Year 2, 3 & 4
Upper Guide – Installation required for
Vertical Orientation of Printer
TSP100ECO – PRINTER OPERATIONS
Note : Upper Guide for TSP100ECO is not compatible with Upper Guide for previous TSP100 Series.
• XML file which was created for current TSP100 Series can be used with TSP100ECO
• When the USB cable is connected to host, Plug & Play will work. The AC (Power) Cable does not have to be connected.
TSP100ECO – PRINTER OPERATIONS
TSP100ECO – PRINTER OPERATIONS
Print Speed is 150mm/sec Print Speed has been improved compared with TSP100U (125 mm/s).
No Power Switch Printer automatically goes into System-Off-Mode (0.07W), when host is shut down. Self-Print instructions:
1.Connect Power Cable 2. Connect ONE USB Plug
3. Hold FEED Button DOWN
4. Connect OTHER USB Plug
TSP100ECO SPECIFICATIONS
Printer Specifications
[1] Print Method Direct Line Thermal Printing
[2] Print Resolution 8 x 8 dots / 203 dpi
[3] Print Speed 28 RPM
[4] Paper Feed Speed Up to 150 mm per second
[5] Printable Width Max. 72 mm
[6] Top Margin 3 mm – 11 mm (Default 3 mm)
[7] Paper Sensors PE sensor
[8] Auto-Cutter Partial cut (Guillotine)
[9] Min. Cut Length 24 mm
[10] Auto-Cutter Life 1 million cuts
[11] Print Head Life Max. 100 million pulse / 100 Km (using recommended paper)
[12] Reliability 60 million lines MCBF
[13] Dimensions 142 (W) x 204 (D) x 132 (H) mm
[14] Weight 1.72 kg
[15] Power Supply Internal (100V – 240V)
[16] Power Consumption [System Off] 0.05 W [System Check] 1.8 W [Printing] 34W
TSP100ECO SPECIFICATIONS
Paper Specifications
[1] Width 80 mm / 58 mm
[2] 2 Color Printing Special thermal paper required
[3] Thickness 0.065 ~0.085mm
[4] Roll Diameter Max 83 mm
Software
[1] Emulations Star Line Mode & ESC/POS
[2] Code Pages 40 pages
[3] Interface USB only
[4] Interface Options N/A
[5] Drivers Windows, Linux, OPOS, JPOS, Mac,
THE END