Trusses
-
Upload
sheikh-junaid-yawar -
Category
Technology
-
view
1.351 -
download
4
description
Transcript of Trusses
Truss Bridges
Truss Basics – Overview
A metal truss bridge is a bridge whose main structure comes from a triangular framework of structural steel or iron.
Iron and Steel
Truss Basics – Forms of Metal
Due to their variety of designs, there is a system that is used to classify metal truss bridges by design.
Truss Basics
If the trusses run beside the deck, with no cross bracing above the deck, it is called a pony truss bridge.
If cross-bracing is present above the deck of the bridge, then the bridge is referred to as a “through truss.”
Pony Truss
Through Truss
Truss Basics
Trusses may run under the deck: these are called simply Deck truss bridges.
Deck Truss
The different parts of a truss bridge are all named. Some of the parts:
Top / Upper Chord Vertical (Member)
Diagonal (Member)
Bottom / Lower Chord
Portal Bracing
Sway Bracing
Lateral Bracing
Floor beam Connections
End Post
Each space between vertical members and end posts is one panel. This bridge has six panels.
Truss Bridge Parts
Hip Vertical (Only the verticals that meet the top of the end post)
The chords and members of a truss bridge experience strain in the form of tension (stretching apart) and
compression (squeezing together). Engineers often picked different types of materials and designs for the different parts of a bridge based on these forces. An
example is shown above.
Truss Bridge Forces
Tension
Compression
Truss Bridge Connections
The pieces of the framework of a truss bridge are held together by connections. Most connections on historic
bridges are either riveted or pinned.
Pinned Connections
Pinned connections can be identified by the bolt-like object called a pin going through the loops of the
members. They tend to show up on bridges from the first half of the truss bridge era.
Pin
Riveted Connections
Riveted connections are identified by a “gusset plate” which diagonals and vertical members are riveted to,
and no pin is present. These connections tend to show up in the second half of the truss bridge era.
Truss Configurations
Pratt
Overview: One of the two most common configurations, it tends to occupy the earlier half of the truss bridge era, but was used throughout. Originally developed by Thomas and Caleb Pratt in 1844.
Appearance: Diagonal members angle toward the center and bottom of bridge.
Truss Configurations
Pratt – Additional Notes
The Pratt may have additional diagonal members, sometimes of a smaller size, that do not follow the
standard pattern to form an “X” shape on panels toward the center.
Truss Configs – Pratt Notes
Truss Configurations
Whipple
Overview: The Whipple truss is also known as the double-intersection Pratt truss. It was patented by Squire Whipple in 1847 as a stronger version of the Pratt truss.
Appearance: Similar to the Pratt truss, but the diagonals pass through one vertical member before reaching the bottom chord. They tend to show up on longer spans built in the first half of the truss era, and with pinned connections.
Truss Configurations
Baltimore
Overview: The Baltimore railroad designed a truss configuration that eventually found use on both railroads and highways. It is a Pratt truss with additional members added for additional strength.
Appearance: Characterized by a Pratt configuration with extra smaller members branching off of the diagonals.
Truss Configurations
ParkerOverview: Charles H. Parker modified the Pratt design to create what became known as the Parker truss configuration. This design allowed one to use less materials to get the a similar load capacity. The downside was the more complex design.Appearance: Characterized by an arch-shaped (polygonal) top chord, with diagonals that follow the Pratt configuration.
Truss Configurations
Pennsylvania
Overview: Sometimes called the Petit truss. Designed by the Pennsylvania railroad, this configuration combines the engineering ideas behind the Baltimore with those of the Parker or Camelback.
Appearance: Features an arch-shaped (polygonal) top chord with a diagonal arrangement like the Baltimore.
Truss Configurations
Warren
Appearance: Alternating diagonal members form a repeating “V” shape. A true Warren does not have vertical members.
Overview: The other most common truss configuration, this design tended to be used in the second half of the truss bridge era, and with riveted connections. Originally developed in 1848 by James Warren and Willoughby Monzoni.
Truss Configurations
Warren: With Verticals
Most Warren truss bridges do in fact feature vertical members. They may be referenced simply as “warren with verticals” truss
bridges. Vertical members may occur at each connection, or every other connection.
Truss Configurations
Double-Intersection Warren
Overview: Often called simply the Double Warren, this is an uncommon truss configuration. Bridges with this configuration often have riveted connections.Appearance: Looks like two Warren trusses offset and superimposed on each other, forming a repeating “X” shape.
Truss Configurations
Lenticular
Overview: One of the rarest bridge designs in the country. Patented by the Berlin Iron Bridge Company of East Berlin, CTAppearance: Both the top chord and bottom chord have an arched appearance, forming a distinctive oval or eye-like shape.
Your Turn!
Identify Truss Bridge TypesIn your groups, identify the 12 bridges. For each bridge, an overview and a connection for the bridge is shown. On a sheet of paper, record the bridge number you are looking at and list the following:
Truss Configuration. Do this for all photos first.
After you complete that, see if you can add the following information for each bridge.
Connection Type (Pinned or Riveted)
Truss Arrangement (Through, Pony, Deck)
Example:
1. Pratt, Pinned, Through
Teach Historic Bridges!
Conclusions: The Website
Many people are not even aware that bridges aside from covered bridges are even historic. The result is that other types of beautiful historic bridges are being demolished. Historic bridges can be worked into nearly every school subject. Please bring the beautiful world of historic bridges to your students!