Truly Universal and Reliable -...
Transcript of Truly Universal and Reliable -...
Cond
uctiv
ity M
eter
The SevenCompact™ conductivity meter S230 is the perfect choice for a wide range of applications. Not only does it measure conductivity but also various other param-eters, like salinity, total dissolved solids, resistivity and conductivity ash. Starting a measurement or calibration has never been easier, requiring only a single keypress.
The SevenCompact™ series combines precise electrochemical measure-ment technologies with flexibility, innovative design and ease-of-use. It can be universally employed and continues the tradition of the Seven series from METTLER TOLEDO.
SevenCompact™ 230Truly Universal and Reliable
Seven good reasons for SevenCompact™
• Fast and accurate measurements• User-friendly operation• Menu guidance in 10 languages• Clear, welll arranged color display• Many peripheral options• GLP compliant• Service offering, including IQ/OQ
2
Cond
uctiv
ity M
eter Productive Work from the Start
Intuitive and Powerful
The instrument gives you the choice! In the normal screen layout, all available information is visible. By switching to the uFocus™ view you will not be distracted by information of less importance.
All Parameters or the Essentials – Decide by a Single Keypress
uPlace™: the electrode arm can be operated with one hand; moving straight up and down. This allows for faster measurements and re-duces the risk of the sample ves-sel tipping over and/or damage to the sensor!
Perfect Ergonomics and High Productivity with uPlace™
Upon endpointing SevenCompact™ allows multiple archiving options: the data can be stored, printed or transferred to LabX direct. Any combination of these three options is possible giving you total flexibility.
Total Flexibility withData Processing
without worrying about security settings. Still they benefit from the functionalities that minimize mis-takes, such as calibration support and Intelligent Sensor Management
SecurityThe instrument’s versatility is also reflected in its security package. Users requiring little or no GLP sup-port can easily use the instrument
The instrument’s functionality has been designed to maximize the productivity of your work. Stand alone, the instrument already offers many functionalities, but you can achieve higher efficiency and flexibility by connecting peripherals.
(ISM®). On the other hand, those that need full GLP support will have peace of mind when employing the full spectrum of security function-alities.
3
Measuring range Resolution Accuracy
Conductivity 0.001 μS/cm … 1000 mS/cm 0.001 … 1 ± 0.5%
TDS 0.00 mg/L...1000 g/L 0.01 … 1 ± 0.5%
Salinity 0.00… 80.00 psu 0.00 … 1.0 ± 0.5%
Resistivity 0.00…100.0 MΩ•cm 0.00 … 1.0 ± 0.5%
Conductivity ash 0.000…2022% 0.001 … 1 ± 0.5%
Temperature MTC -30.0 … 130.0 °C 0.1 °C ± 0.1 °C
Temperature ATC -5.0 … 130.0 °C 0.1 °C ± 0.1 °C
Calibration Calibration points
Calibration standards
Temperature capture
Manual input of cell constant
Display of cell constant
Calibration reminder
1
13 pre-defined and 1 user-defined
Automatic* and manual
Yes
Always visible on home screen
User-configurable
Measurement Choice of endpoint formats
Temperature capture
Choice of reference temperature
Choice of temperature compensation
Serial measurements
Automatic, manual, timed
Automatic* and manual
20 °C or 25 °C
Linear, non-linear, off, pure-water
Time interval user-configurable
Regulations Pure & ultra-pure water
Bioethanol
Sugar analysis
USP/EP compliant
ABNT NBR 10547:2006
ICUMSA GS2/3-17 and GS 1/3/4/7/8-13
System and GLP Menu guidance
Display color scheme
Time and date
PIN protection
Measurement limits
Instrument modes
ID input
ID input automation
10 languages
Blue, red, green, grey
2 time formats, 4 date formats
Login, deletion of data, system settings
User-defined
Routine mode / expert mode
User ID, sample ID, sensor ID, sensor SN
Barcode reader and keyboard (USB)
Data processing Data storage
Print formats
Data Export
1000 measurements
Short, normal, GLP
USB-stick, LabX direct PC software
Connectors Conductivity input
Temperature sensor input
Digital sensor input
Communication interfaces
Stirrer connector
Mini-DIN
Mini-DIN (integrated in conductivity input)
mini-LTW
RS232, USB-A, USA-B
Mini-DIN
General Power requirementsSize/weightDisplay
DC 9–12 V/10 W204 x 174 x 74 mm, 890 gTFT
Ambient conditions Display
Temperature
Relative humidity
Installation category
Pollution degree
Altitude
TFT
5 … 40 °C
5 … 80% (non-condensing)
II
2
Up to 2000 m above sea level
Ingress protection Protection level IP54
Materials HousingWindowKeypad
ABS/PC reinforcedPolymethyl methacrylate (PMMA)Membrane keypad: Polyethylene terephtalate (PET)
Specifications for SevenCompact™ Conductivity S230
* all conductivity sensors provided by METTLER-TOLEDO have an integrated temperature sensor. With these only ATC measurements/calibrations are possible.
www.mt.com/pHFor more information
Mettler-Toledo AG, AnalyticalCH-8603 Schwerzenbach, SwitzerlandTel. +41 22 567 53 22Fax +41 22 567 53 23
Subject to technical changes© 12/2012 Mettler-Toledo AG, 30019061Marketing pH Lab / Global MarCom Switzerland
Order info Description and sensors Order no.
S230-Basic (instrument) Includes instrument, electrode holder, protective cover, operating instructions, quick guide, declaration of conformity and test certificate
30019033
S230-Kit (kit) As S230-Basic, but also with InLab® 731-ISM, guide to conductivity and dissolved oxygen, and 2 calibration sachets for 1413 μS/cm and 12.88 mS/cm
30019034
S230-USP/EP (kit) As S230-Kit but with InLab® 741-ISM instead of InLab® 731-ISM, and without 12.88 mS/cm calibration sachets
30019035
Description and order information for SevenCompact™ Conductivity S230
Order Information
Description Order no.
uPlace™: Electrode holder (included in standard delivery) 30019823
Protective cover (included in standard delivery) 30019824
Mains adapter 12V (included in standard delivery) 11120270
RS-P25 printer (with RS232 cable) 11124300
Barcode reader body 21901297
USB cable for barcode reader (not included with barcode reader body) 21901309
LabX direct PC software 51302876
USB A-B cable 1.8 m for LabX direct PC software (not included with LabX direct PC software) 51191926
Guide to conductivity and dissolved oxygen (included in kit versions) 51724715
General accessories for SevenCompact™
Sensors for SevenCompact™ Conductivity S230
Description Order no.
1413 μS/cm standard conductivity solution in side-sealed sachets, 30 x 20 mL 51302049
12.88 mS/cm standard conductivity solution in side-sealed sachets, 30 x 20 mL 51302050
10 μS/cm standard conductivity solution, 250 mL 51300169
84 μS/cm standard conductivity solution, 250 mL 51302153
500 μS/cm standard conductivity solution, 250 mL 51300170
1413 μS/cm standard conductivity solution, 250 mL 51300192
12.88 mS/cm standard conductivity solution, 250 mL 51302194
Conductivity standard solutions
Sensors with fixed cable Order no.
InLab® 731-ISM, 4-electrode graphite conductivity sensor, ATC 30014092
InLab® 741-ISM, 2-electrode steel conductivity sensor, ATC 30014094
InLab® Trace, high-accuracy sensor for low conductivities, ATC 30014097
Flow-Cell for InLab® Trace 30014098
InLab® Trace Kit (Sensor and Flow-Cell) 30014099
Seve
nCom
pact
™
Increased pH Efficiency with SevenCompact™ Universal and Reliable Instruments
SevenCompact™
Intuitive and Clear
Powerful and Versatile
22
Seve
nCom
pact
™ V
ersa
tility More Efficient Everyday Work
Versatile and Universal
Chemical Industry
Analysis parameters and sample characteristics cannot be more diverse than in pure chemical R&D. SevenCompact's flexibility makes it the perfect choice for pH, ion, redox and conductivity mea-surements.
The wealth of data archiving and input possibilities makes the SevenCompact™ series ideally suited for satisfying the stringent needs and GLP requirements of the pharmaceutical industry and testing labs.
Pharmaceutical Industry Food & Beverage Industry
Only a single keypress is required to start a measurement which can be stored and printed automati-cally. This makes it great for quick and reliable analysis of many samples during the food produc-tion process.
The SevenCompact™ series combines precise electrochemical measure-ment technologies with flexibility, innovative design and ease-of-use. It can be universally employed and continues the tradition of the Seven series from METTLER TOLEDO.
While the instruments encompass numerous measurement parametersand offer many options for data input and archiving, it is also possible to perform straight-forward calibrations and measurements with a single keypress! At METTLER TOLEDO we understand that reproducibility and measurement performance are the highest priority. As a customer you can therefore rest assured that the SevenCompact™ series fulfils the highest quality standards and guarantees precise and reliable measurements.
33
Cosmetics
Be it QA during production or QC of finished products and raw ma-terials, the SevenCompact™ series stands up to demanding data input, measurement and archiving tasks.
For research groups and labora-tory courses alike, the intuitive operation and versatility fulfils the needs of lab researchers and students.
Academia Biotechnology
A perfect match for our micro pH and conductivity sensors, the SevenCompact™ series are well suited for obtaining precise and reliable results with the smallest samples and most precious solu-tions.
Green plants rely on sunlight for photosyn-thesis and are universal in their distribution throughout the world.
44
Seve
nCom
pact
™ P
rodu
ctiv
ity Productive Work from the StartIntuitive and Clear
A new landmark for intuitive operation
Starting a measurement or calibration or toggling between measurement modes only re-quires a single keypress. For adjustment of settings, the Seven Compact™ offers menus with full sentences in 10 languages. No more cryptic expressions!
The 4.3 inch high-resolution color display has large digits and well arranged icons making relevant information identifiable at a gla-nce. The color and contrast can be adapted to your preferences and light conditions.
Large color display All parameters or the essentials – decide by a single keypress
The instrument gives you the choice! In the normal screen layout, all available information is visible. By switching to the uFocus™ view you will not be distracted by information of less importance.
The operation of the SevenCompact™ series is so intuitive that measure-ment can start immediately. The large and clear color display makes work-ing with these instruments simply a pleasure.
The instruments’ functionality has been designed to maximize the productivity of your lab work. Starting a measurement or calibration, toggling measurement modes or switching between the two different display layouts only requires a single keypress. Selecting the right settings in the menu is intuitive because the instrument speaks your language.
55
An acoustic signal can be setup to announce warnings, button presses or end-point stability, allowing you to focus on other laboratory tasks while measure-ments or calibrations are running.
Viewing or also hearing –according to your preferences
Perfect ergonomics and high productivity with uPlace™
uPlace™: the electrode arm can be operated with one hand, moving straight up and down bringing the electrode into the position where it works best for your sample. This allows for faster measurements and reduces the risk of the sample vessel tipping over and/or damage to the sensor!
Dissection of a dandelion, showing the clear and structured arrangement of the seeds, which easily become airborne by the wind.
66
Seve
nCom
pact
™ S
ecur
ity Extensive Security FunctionsInnovative and Reliable
A wealth of GLP functions – leaves nothing to coincidence
The instruments come with a package of GLP support functions such as PIN protection, GLP print-out with all relevant information and measurement limit monitor-ing. A warning message appears should values fall below or ex-ceed defined limits.
SevenCompact™ has two oper-ating modes. In routine mode deletion of data and changing of settings is blocked, turning the instrument into a reliable work-horse. The PIN protected expert mode allows authorized users to enjoy the full range of functions.
Routine / expert mode – suits the needs of any operator
Professional calibration – makes calibrations so easy
The instruments provide calibra-tion support on many levels, featuring pre-defined and user-defined buffer groups, a calibra-tion reminder with optional sensor blocking and a pH sensor icon, which shows the quality of the latest electrode calibration.
SevenCompact™ comes with a wealth of security functions to support you during all phases of the calibration, measurement, data collection and archiving process. Its ingenious package makes the instrument suitable for routine measurements and professional measurements under stringent GLP-conditions alike.
The instrument's versatility is also reflected in its security package. Users requiring no or little GLP support can use the instrument conveniently without worrying about the security settings and possibilities. Still they benefit from those functionalities that reduce mistakes to a minimum, such as calibration support and Intelligent Sensor Management (ISM®). On the other hand, those that need full GLP support will have peace of mind when employing the full spectrum of security functionalities.
77
Factory calibration: The electrode certificate with the factory calibration details of an ISM® sensor is stored on the sen-sor and can be reviewed or printed anytime.
Temperature: The maximum temperature an ISM® sensor is exposed to during a measurement is automatically monitored and can be recalled. This provides an insight into pos-sible reasons for rapid ageing of your sensor.
Intelligent Sensor Management (ISM®) – security at its finest!
ISM® eliminates mistakes in the following ways:
Correct sensor identification: Upon connection, the sensor is au-tomatically identified. This prevents performing a measurement with thewrong sensor ID by mistake.
Current calibration: The most recent sensor calibration is transferred to the meter on at-tachment and is selected for future measurements automatically. This
offers the peace of mind that the correct calibration data is being used, regardless of which meter the sensor is connected to.
5 calibration data records: The last five calibration data re-cords are stored on the ISM® sensor which can be viewed or printed out at any time. You can monitor your sensors’ performance over time and take action if needed, avoiding future surprises and increasing the uptime of your instrument.
The thick spined leaves of Agave Parryi pro-vide security against herbivores and allow it to survive under dry conditions.
88
Seve
nCom
pact
™ D
ata
Man
agem
ent Data Entry, Handling and Archiving
Versatile and Convenient
Large memory for storing data
SevenCompact™ offers a large 1000 data set memory which can be filtered for review, printed and USB-exported by memory number, measurement type and sample ID. This guarantees that you can quickly locate your mea-surement data.
The SevenCompact™ series offers three possibilities for entry of sample, user and sensor IDs. In addition to the integrated key board, you can also use a bar-code reader or USB keyboard.
Flexible and convenient data input
Efficient high sample throughput
Customers with high sample throughput can benefit from a well-thought-out feature to enter different sample IDs quickly. With the instrument in the resting state, scanning a barcode or typing on the keyboard immediately opens the sample entry screen and dis-plays the new entry.
SevenCompact™ provides many supportive options through the complete cycle of data entry to archiving. Stand alone, the instrument already offers standard functionalities, but you can achieve higher efficiency and flexibility by connecting peripherals.
The instruments’ options for data entry, handling and archiving are numerous and configu-rable to your needs. Data can be conveniently entered with the integrated keyboard, but con-necting a barcode reader or external keyboard makes the process more efficient. Measure-ment and calibration data can be stored on the instrument, printed, exported to a USB stick or transferred to a PC with LabX direct software.
99
Total flexibility with data processing
Upon endpointing SevenCompact™ allows multiple archiving options: the data can be stored, printed or transferred to LabX direct. Any combination of these three op-tions is possible giving you total flexibitily.
In case you need more storage space, when performing long interval measurements with many data points for example, we rec-ommend the use of LabX direct software. This powerful software has no data storage restrictions and can display your measure-ments graphically.
Infinite data storage space with LabX direct
Hardcopy or data export to keep your results
Because creating a hardcopy is one of the safest ways of archiving your data, SevenCompact™ sup-ports various METTLER TOLEDO printers. Another option is to export your data to a USB stick as a .txt file for storage or processing.
The hexagonal wax cells of a honeycomb are used for storing honey and pollen and to raise their larvae.
1010
Seve
nCom
pact
™ P
rote
ctio
n Instruments with Protection at all LevelsComplete and Contemporary
To maximize their lifetime, the instruments have been designed to with-stand dust and spills of aqueous solutions. Environmental protection is also ensured as the materials, electronic components and packaging have been specifically selected for this purpose.
Although great care is taken in the laboratory, accidental spills cannot always be prevented; therefore it is good to know that your SevenCompact™ instrument is well-protected. When not in use the instrument is encapsulated by rubber caps and a protective cover, providing a barrier against dust and water.
Transparent cover – an extra barrier
The protective cover is part of the standard delivery and can be left on the instrument during operation without affecting the key press functionalities. It also provides an extra barrier when the meter is not in use.
The SevenCompact™ instruments have been designed to withstand spills on the housing and connec-tions. Not only does this provide perfect protection, but it also allows for easy cleaning with a damp cloth.
IP54 rating – water and dust resistance
Extra protection for the connectors
For extra protection rubber caps cover the connectors, which are the most vulnerable points of the instrument, keeping water and dust out. The caps are connected on one side of the housing, so there is no risk of losing them!
1111
Instruments with Protection at all LevelsComplete and Contemporary
At METTLER TOLEDO we care strongly about the environment. The power supply has the highest Energy Star rating which means energy loss and heat generation are particularly low. All of our components are RoHS compliant so they are free of hazardous, banned substances.
Environmentally friendly electronics
Green packaging
The packaging used for the SevenCompact™ instruments is specifically selected with the environment in mind. It consists of reclycable cardboard and is manufactured without the use of chlorine bleaching agents.
Close-up of a butterfly pupa, which has a hard protective coating and uses camou-flage to evade potential predators.
1212
Seve
nCom
pact
™ S
ervi
ce Comprehensive Service and Support Elaborate and Tailored
Compliance made easy
A calibration performed with certi-fied tools demonstrates proper functioning and ensures confor-mity with manufacturer's speci-fications. With the calibration certificate, ensure your next audit is satisfying and gain peace-of-mind on compliance issues.
Regular technical inspections en-sure that the instrument continues to function reliably and error-free, maximizing its uptime. With our wide range of services we can find a flexible solution for every need.
Service – flexible and customized possibilities
Cost-efficient and fast support
Fast support without the necessity of a service visit or spending hours on the phone is now pos-sible. Just export the instrument settings to a USB-stick and send them via e-mail to a readily avail-able support team.
With comprehensive service offerings from METTLER TOLEDO you can maintain the performance and maximize the uptime of your instruments. At the same time you can be free of concerns around compliance issues during quality audits. Enjoy the peace of mind.
1313
IQ/OQ Package – compliance without doubts
We offer an initial qualification package IPac consisting of Instal-lation Qualification (IQ) and Opera-tional Qualification (OQ):
Installation Qualification: professional installation recorded in the IPac documentation. All tasks are carried out according to the SOP.
Operational Qualification: functional tests that ensure proper operation of the instrument accord-ing to the manufacturer specifica-tions. The results are documented in the IPac.
System suitability test: the final part of initial qualification based on an instrument & sensor specific test. It confirms the proper operation of the equipment by per-forming a standard measurement (either pH or conductivity). The rec-ommended procedures can also be used for further routine checks.
The user also benefits from the IQ/OQ services. Basic user familiariza-tion offered in the IPac gets them up to the speed with efficient and immediate operation of the instru-ment.
Effortless IQ/OQ
Instrument qualification is often mandatory. Proof of professional installation and commissioning is required by several regulations and quality standards. We serve with simple and fully compliant initial qualification services.
Purple sea fan, showing the tentacles of each polyp that the organism uses for filter-ing plankton from the water.
1414
Seve
nCom
pact
™ F
lexi
bilit
y Connectivity and Peripheral OptionsManifold and Convenient
Useful magnetic stirrer
The optional magnetic stirrer from METTLER TOLEDO is controlled and powered by the instrument. Stirring can be performed both before and during measure-ment and the stir speed can be adjusted in the menu settings to reflect the viscosity of the sample or sample vessel size.
SevenCompact™ has a USB A and USB B interface, allowing connec-tion of a barcode reader or key-board, a USB stick or a PC with LabX direct software. Recognition of a USB device is visually indi-cated by the appearance of the respective icon on the display.
Plug and play USB interfaces Convenient printing possibilities
METTLER TOLEDO printers with RS232 interface are sup-ported. Customers requiring the maximum level of efficiency and convenience are recommended to use the RS-P25, RS-P26 and RS-P28 series of printers. These are automatically detected and the baud-rate settings immedi-ately adjusted.
SevenCompact™ is a powerful instrument in stand alone mode, but with peripherals from METTLER TOLEDO its possibilities are greatly increased. Our focus is easy operation, ensuring that installing and using peripherals is as easy as it can be.
Various interfaces on the instrument allow you to connect peripherals simultaneously accord-ing to your needs, supporting your workflow in the best possible way. We offer a large selec-tion of sensors so you will always find one that suits your application. Using our high-quality sensors and certified buffers and standards for calibration allows you to rest assured that the results obtained are of the highest accuracy.
1515
Buffers, standard solutions and electrolytes
Choose from our range of pH buffers, conductivity and ion stan-dards, electrolytes and electrode cleaning solutions. For ion-selec-tive measurements not only do we offer calibration standards, but also ISA and TISAB solutions to guarantee your ion measurements are of the highest accuracy.
The user-friendly and flexible PC software archives your results quickly and reliably through the transfer of data to an open appli-cation such as MS Excel. You can use our pre-configured templates and have the values graphically displayed or you can design your own according to your needs.
LabX direct pH software A sensor for every application
METTLER TOLEDO has over 60 years of experience with sensor manufacturing. We offer sensors for all applications, covering pH, ORP, conductivity and ion concen-tration. Read our Sensor Brochure to see the full range of electrodes or visit: www.mt.com/electrode-guide to find the best sensor for you, with tips and tricks and back-ground information.
The sunflower stays connected to the sun, moving its head towards the direction the sunlight is coming from.
1616
pH/Io
n M
eter SevenCompact™ pH/Ion Meter S220
Flexible and Powerful
Eight different pre-defined pH buffer groups are available giving you a high degree of flexibility. It is also possible to create your own buffer group. After calibra-tion, the sensor icon shows you at a glance the quality of the calibration.
The eight most commonly used ion types are pre-programmed to make the settings as convenient as possible. For others, you can enter generic ions with different ionic charges to ensure that the slope is calculated correctly.
pH calibration support Full ion supportIon measurements – flexible sensor choice
With SevenCompact™ S220 it is possible to use our perfectION™ Series of combined Ion Selective Electrodes as well as our collec-tion of half-cells. For measure-ments with half-cell sensors a reference electrode connection is present.
The SevenCompact™ S220 pH/Ion meter is not just an ordinary pH meter, it can also measure ORP and ion-concentration in various units. Switching modes before, during or after measurement is easy requiring just a single keypress.
Pressing a single button – READ or CAL – starts a measurement or calibration, with three options for endpointing. With a timed endpoint the analysis endpoints after a pre-defined time interval. It can also be endpointed manually or the instrument can automatically endpoint according to one of three stability criterion: fast, normal or strict.
1717
Measuring range Resolution Accuracy
pH -2.000 … 20.000 0.001 / 0.01 / 0.1 ± 0.002
mV* -2000.0 … 2000.0 0.1 / 1 ± 0.2
Ion concentration** 1.00E-9 … 9.99E+9 ± last signifi. digit ± 0.5%
Temperature*** -30.0 … 130.0 °C 0.1 °C ± 0.1 °C
Calibration Max. 5 points, 8 pre-defined and 1 user-defined buffer group
System Date / time, PIN-protection, 10 languages
Data storage 1000 measurements
Data export USB stick, LabX direct PC software
Measurement limits User-definable with warning message
ID entry User ID, Sample ID, Sensor ID, Sensor Serial Number
ISM® Intelligent Sensor Management supported
* Instrument can also measure rel. mV** Ion concentration supports units mmol/L, mol/L, ppm, mg/L, % and pX*** Temperature display choice between °C and °F. ATC temperature range is -5,0 ... 130,0 °C
Order info Description and sensors Order no.
S220-Basic (instrument)
Includes instrument, electrode holder, protective cover, operating instructions, quick guide, declaration of confor-mity and test certificate
30019028
S220-Kit (kit) As S220-Basic, but also with InLab® Expert Pro-ISM, guide to pH measurements and 2 buffer sachets for pH 4.01, 7.00, 9.21 and 10.00.
30019029
S220-Bio (kit) As S220-Kit but with InLab® Routine Pro-ISM cable kit instead of InLab® Expert Pro-ISM
30019031
S220-U (kit) As S220-Kit but with InLab® Versatile Pro instead of InLab® Expert Pro-ISM
30019032
Description and order information for SevenCompact™ pH/Ion meter S220
Specifications for SevenCompact™ pH/Ion meter S220
SevenCompact™ S220 supports both NTC30kΩ and Pt1000 temperature sensors, with the option of automatic detection or manual selection. Three options for temperature capture exist: an integrated temperature sen-sor in the electrode, an external temperature sensor or setting the temperature manually.
Temperature – an important parameter
1818
Cond
uctiv
ity M
eter SevenCompact™ Conductivity Meter
Powerful and Versatile
Bioethanol
By default the instrument uses standard conductivity units but it also supports special units required for bioethanol analysis meaning unit interconversion and recalculation is no longer neces-sary. The InLab® 725, a special 2-cell platinum sensor is also available for this application.
The SevenCompact™ S230 conductivity meter is the perfect choice for a wide range of applications. Not only does it measure conductivity but also various other parameters such as salinity, resistivity, total dissolved solids and conductivity ash.
Sugar analysis – the right package for this application
The SevenCompact™ S230 is ideally suited for sugar analysis. It has a special parameter for Conductivity Ash, which can be measured in accordance with two official ICUMSA regulations for refined sugar or raw sugar and molasses.
Low conductivity measurement requires special attention. When measuring pure or ultra-pure water there are several sources of potential error such as carbon di-oxide from air and temperature in-accuracy. Our digital conductivity cell InLab® Trace, with high tem-perature accuracy and optional flowthrough cell now provides the perfect solution.
Pure water – high accuracy for low conductivity
The instruments are ideally suitable for routine conductivity measurements and special appli-cations alike. Calibrations are possible by manual input of the cell constant or by using a standard solution. For measurements you have the choice between two reference temperatures and four different temperature compensation options: linear, non-linear, off and pure water.
1919
Temperature compensation for pure water
For pure water we offer a special temperature compensation mode to increase the reliability of your readings. For USP/EP measure-ments you can also switch the temperature compensation off to comply with the regulations.
Measuring range Resolution Accuracy
Conductivity* 0.001 μS/cm … 1000 mS/cm 0.001 … 1 ± 0.5%
Temperature** -30.0 … 130.0 °C 0.1 °C ± 0.1 °C
Calibration 13 pre-defined or 1 user-defined standard
Cell constant Determined via calibration or entered manually
Temperature compensation
Linear, non-linear, off, pure- water –reference temperature 20 °C or 25 °C
System Date / time, PIN-protection, 10 languages
Data storage 1000 measurements
Data export USB-stick, LabX direct PC software
Measurement limits User-definable with warning message
ID entry User ID, Sample ID, Sensor ID, Sensor Serial Number
ISM® Intelligent Sensor Management supported
* Instrument can also measure rel. mV** Ion concentration supports units mmol/L, mol/L, ppm, mg/L, % and pX*** Temperature display choice between °C and °F. ATC temperature range is -5,0 ... 130,0 °C
Order info Description and sensors Order no.
S230-Basic (instrument)
Includes instrument, electrode holder, protective cover, operating instructions, quick guide, declaration of conformity and test certificate
30019033
S230-Kit (kit)
As S230-Basic, but also with InLab® 731-ISM, guide to con duc tivity measurements and 2 calibration sachets for 1413 μS/cm and 12.88 mS/cm
30019034
S230-USP/EP (kit)
As S230-Kit but with InLab® 741-ISM instead of InLab® 731-ISM, and without 12.88 mS/cm calibration sachets
30019035
Description and order information for SevenCompact™ Conductivity
Specifications for SevenCompact™ Conductivity meter S230
www.mt.com/pH
Quick and Reliable MeasurementsFor Results at your Fingertips
SevenGo™ Portable InstrumentsSevenGo™ / SevenGo Duo™
SevenGo pro™
SevenGo Duo pro™
pH/ORP/Redox
Conductivity
Ion Concentration
Dissolved Oxygen
Lab
Met
ers
Lab
Sens
ors
InLab® Electrodes
pH electrodes
Conductivity probes
Dissolved oxygen sensors
ORP electrodes
Ion-selective and gas-sensitive electrodes
Reference electrodes
Electrode cables and accessories
Buffers, electrolytes and cleaning solutions
Simply Reliable The Right Electrode Every Time
Mettler-Toledo AG, AnalyticalCH-8603 Schwerzenbach, SchweizTel. +41 44 806 77 11Fax +41 44 806 72 40
Subject to technical changes© 08/2011 Mettler-Toledo AGPrinted in Switzerland 30019036Marketing pH Lab / Global MarCom Switzerland
For more information
METTLER TOLEDO and Seven– Extra Value for Everyday Lab-Work...
...with Corresponding Sensors
METTLER TOLEDO combines 60 years of experience of INGOLD in the production of electrochemical sensors with the innovative electronics of the Seven series.
The complete METTLER TOLEDO portfolio is docu-mented in a separate brochure with the order number 51724332.
...and for Use in the Field
The METTLER TOLEDO Seven range provides models for use in the lab as well as portable models for use in the field and in factories. The portable SevenGo™ and SevenGo Duo™ instruments are documented in a sepa-rate brochure with order number 51725122.
Quality certificate. Development, production and testing according to ISO 9001.
Environmental management system according to ISO 14001.
“European conformity”. The CE conformity mark provides you with the assurance that our products comply with the EU directives.
Productivity increase and cost savingProfessional installation and taking-to-operation makes a direct deployment possible. After the user training you can immediately start your measurements.
Proved performancefor accurate resultsInitial qualification consisting of IQ and OQ performed by a professional. Gen-eral System Suitablity Test completes the initial qualification by proving the reliability of the instrument and its proper operational functionality.
IPac: fast and easy qualification solutionManufacturers of goods for end user consumption have to ensure that their products are safe and of consistent quality. This is secured by following the quality manage-ment standards specific for the product area and compli-ance with them. Therefore, the manufacturers need to establish proven production processes including proper equipment to monitor them. While the qualification of analytical and production equipment has long been a mandatory requirement in the pharmaceutical, biotech-nology and medical industries, today many customers in non-regulated environments also see the clear benefits of having their analytical equipment qualified. To support this customer group, METTLER TOLEDO has created the IPac - Initial Qualification Package. This IQ/OQ package is the easiest and fastest solution for a professional and regulatory compliant meter qualification.
Professional Installation & Qualificationfor Meters
IPa
c In
itial
Qua
lific
atio
n
ComplianceDocumented quaIification including cali-bration ensures compliance with quality systems such as GMP and ISO. IPac limits the risk of non-compliance during FDA audits and other quality manage-ment system assessments.
Tailor-made solutionsFor every need, METTLER TOLEDO provides the right service solutions – for life-long measurement performance, productivity and quality management.
www.mt.com
IPacInitial Qualification for SevenCompact™ and SevenMulti™ Meters
Subject to technical changes© 09/2011 Mettler-Toledo AGPrinted in Switzerland, 51725171B
Quality certificate ISO9001Environment certificate ISO14001Internet: http://www.mt.comWorldwide service
For more information
Industry examples
• Energy
• Cosmetics
• Electronics
• Automotive
• Petrochemicals
• Food & Beverage
• Chemicals & Plastics
IPac Your needs Your benefits
Regulatory complianceDocumented proof of proper installation (IQ) and taking-to-operation (OQ)
Qualification documentation Proven IQ/OQ protocols
Qualified personnel User training
Performance at a constant level Routine tests (PQ) defined
Accurate and reliable results General System Suitability Test
Service and maintenance Service plan defined (MQ)
Initial Qualification (IQ/OQ) using IPac
Initial qualification and / or requalification documentation
IQ
Installation Qualification is documented proof of: • adequate installation • compliance of installation environment conditions• completeness of the supplied system
OQ
Operational Qualification is demonstration and documented proof of:• complete operational functionality being in accordance with system specifications • user familiarization
PQ
Performance Qualification is a process of:• regular examination of instrument performance• demonstrating the continuous accuracy and reliability of the generated results • ensuring and maintaining the traceability of measurements
MQ
Maintenance Qualification is:• definition of preventive maintenance scope and intervals• determination of calibration intervals• service plan including all necessary measures and procedures to keep the instrument well maintained and calibrated
For the current service offering go to: http://www.mt.com/service
Requalification using IPac
Missed initial qualification of your meter? No problem! With the requalification option included in the IPac it is possible to requalify an already installed system and ensure a compliance with the corresponding regulatory requirements and quality standards.
Initial Qualification using IPac
Installation- and Operational Qualification (IQ/OQ) are performed by fully authorized and factory-trained service personnel, who provide you with the qualification documentation on the end of installation.
IPacs available for Meters • SevenCompact™ (No. 30019821)• SevenMulti™ (No. 51710588)