True precision – for your asTronomical fuTure

http://www.10Micron.de/

Dual Dovetail Clamp3" (Losmandy) andVixen GP

WEIGHT :

---

4.3.2.1.

Changement NameDateNo.: Ers.f.

Surface:Dimensions without given tolerance

BAADER PLANETARIUMZUR STERNWARTE 82291 MAMMENDORF

Fax 08145/8805Phone 08145/8802

-0.5-0.2

+0.1

Whgr.

NAMEDRAWN

INSPECTED

PRODUCTION

+0.5have a tolerance of +- 0.1mm.

DATE

MATERIAL:DIN ISO 13715

ARTICLE:

DRAWING NO.:

Scale: 1:1

BLATT 1 VON 1

A4This technical design drawing is proprietary, we do reserve all rights. Unauthorized copying, unauthorized use or information of third parties of it´s contents withoult our written consent is considered a serious infringement and will be prosecutedby law

Want to know more?

Visit 10Micron.de41

0

310

22

160

Fax 08145/8805

A4WEIGHT :

---

4.3.2.1.

Changement NameDateNo.:

INSPECTED

Ers.f.

PRODUCTION

Surface:

BAADER PLANETARIUM

Dimensions without given tolerance

ZUR STERNWARTE 82291 MAMMENDORF

ARTICLE:

-0.2+0.1

Whgr.

NAMEDRAWN

Phone 08145/8802

-0.5+0.5

have a tolerance of +- 0.1mm.

DATE


BLATT 1 VON 1

DRAWING NO.:

Scale: 1:1

This technical design drawing is proprietary, we do reserve all rights. Unauthorized copying, unauthorized use or information of third parties of it´s contents withoult our written consent is considered a serious infringement and will be prosecutedby law

410

310

22

160

Fax 08145/8805

A4 WEIGHT :

- - -

4.3.2.1.

ChangementName Date No.:

INSPECTED

Ers.f.

PRODUCTION

Surface:

BAADER PLANETARIUM

Dimensions without given tolerance

ZUR STERNWARTE 82291 MAMMENDORF

ARTICLE:

-0.2+0.1

Whgr.

NAMEDRAWN

Phone 08145/8802

-0.5+0.5


DATE

MATERIAL: DIN ISO 13715

BLATT 1 VON 1

DRAWING NO.:

Scale: 1:1

This technical design drawing is proprietary, we do reserve all rights. Unauthorized copying, unauthorized use or information of third parties of its contents withoult our written consent is considered a serious infringement and will be prosecutedby law

22

330 210

4750

22

410

310

WEIGHT :

---

4.3.2.1.




Fax 08145/8805Phone 08145/8802

-0.5-0.2

+0.1

Whgr.

NAMEDRAWN

INSPECTED

PRODUCTION


DATE


ARTICLE:

DRAWING NO.:

Scale: 1:1

BLATT 1 VON 1


160

22

330 210

4750

22

410

310

WEIGHT :

---

4.3.2.1.




Fax 08145/8805Phone 08145/8802

-0.5-0.2

+0.1

Whgr.

NAMEDRAWN

INSPECTED

PRODUCTION


DATE


ARTICLE:

DRAWING NO.:

Scale: 1:1

BLATT 1 VON 1


160

GMBHBAADER PLANETARIUM

Zur Sternwarte • D-82291 Mammendorf • Tel. +49 (0) 81 45 / 88 02 • Fax +49 (0) 81 45 / 88 05 Baader-Planetarium.de • [email protected] • Celestron-Deutschland.de

Tracking Error, measured with a high resolution external encoder coupled to the R.A. axis

NGC 2264: ©Rolf Geissinger APOD 2012 : GM 2000 HPS und TEC 110 FL

3600 sec. tracking error log HPS 1000 (R.A.-axis) – verified by external absolute encoder –

10Micron workshops

NGC 4565 w. Vixen VMC200L, 8x600 sec. without guiding control. Image: Giuseppe Pasera

GM1000 HPS w. TEC 110FL and SBIG STL-11000

Dual Dovetail Clamp: 3" (Losmandy) and 44 mm (Celestron/Vixen)

Worm geared polar adjustment

Dual Dovetail Clamp3" (Losmandy) andVixen GP

WEIGHT :

---

4.3.2.1.




Fax 08145/8805Phone 08145/8802

-0.5-0.2

+0.1

Whgr.

NAMEDRAWN

INSPECTED

PRODUCTION


DATE


ARTICLE:

DRAWING NO.:

Scale: 1:1

BLATT 1 VON 1


313

404

30

28

339 212

473

3

416

313

Measures GM1000 for 50°

160

Scale: 1:1+0.1

---

4.3.2.1.


PRODUCTION


BAADER PLANETARIUM

82291 MAMMENDORFZUR STERNWARTE

Phone 08145/8802Fax 08145/8805

-0.2 A4

Whgr.

NAMEDRAWN

INSPECTED

-0.5+0.5


DATE


ARTICLE:

DRAWING NO.:

WEIGHT :

BLATT 1 VON 1


313

404

30

28

339 212

473

3

416

313

Measures GM1000 for 50°

160

Scale: 1:1+0.1

---

4.3.2.1.


PRODUCTION


BAADER PLANETARIUM

82291 MAMMENDORFZUR STERNWARTE

Phone 08145/8802Fax 08145/8805

-0.2 A4

Whgr.

NAMEDRAWN

INSPECTED

-0.5+0.5


DATE


ARTICLE:

DRAWING NO.:

WEIGHT :

BLATT 1 VON 1


DIMENSIoNS GM 1000 HPS (50°)

DIMENSIoNS GM 1000 HPS (50°)

True precision – for your asTronomical fuTure

Controller 10 Micron QCI control system V.2 with built in Linux based industrial computer. External PC not required – all mount functions available through Hand Control Unit.

ConneCtors LAN, RS232, power jack for remote switch, autoguider ST-4 port, GPS port, special AUX I/o connector for future applications

energy sourCe 24V/ 3A min. stabilized power supplyConstruCtion All CNC machined aluminum barstock, stainless steel, bronze; all fasteners stainless steelDrive 10 Micron proprietary electronic drive system with AC servo brushless motors with 4000

ppr encoders on boardAbsolute on-Axis-enCoDers

HiRes absolute on axis encoders in RA and Dec, absolute resolution >10 million increments (hermetically sealed inside the mount for permanent protection against dust,insects and moisture)

Pointing ACCurACy < 20" – based on 25 stars alignment acc to detailed pointing model instructionstrACking ACCurACy < 1" RMS in 15 minutes (at sidereal speed)Positioning sPeeD (GoTo speed) max. 15°/sec.trACking sPeeDs Up to 15° / sec. – (theorical) – tested at about 1.5°/sec. (ISS – International Space Station

speed )thrust beArings r.A.& DeC. 85 mm diameterWorm geAr R.A. & Dec. material/polish: diameter 20 mm, lapped and tempered alloy steel with double

bearing support: two leading thrust bearings plus two radial bearingsWorm Wheel RA. & Dec. material/polish: diameter 125 mm, 250 teeth, lapped bronze with double

bearing support: leading thrust bearing – plus on axis roller bearingobjeCt CAtAlogues Messier, NGC, IC, PGC, UGC, SAo, BSC, HIP, HD, PPM, ADS, GCVS, Planets,

Asteroids, Comets, Satellites, custom coordinates, alt-az coordinatesrA.& DeC. Axis DiAmeter 30 mmAxiAl beArings in rA. & DeC. Both axes supported by two preloaded tapered roller bearings and six cup-springs for

thermal compensationlAtituDe rAnge 0 to 82 degrees (0 to 90° latitude block available optionally)Azimuth rotAtion / PolAr height ADjustment

Controlled rotation in AZ: approx. 15 degrees (+/- 7,5 degrees). Worm geared polar height adjustment.

CounterWeight shAft 30 mm diameter x 290 mm useable length, weight 1,5 kgWeight of mount Total 18 kg – without cw-bar and base plateinstrument loADing CAPACity

Approximately 20 kg photographic payload / 25 kg max. payload (not including counterweights)

DuAl DovetAil ADAPter PlAte

Integrated clamps to fit 3" (Losmandy) and 44 mm (Celestron / Vixen) dovetails. Two knobed brass clamps

Pier/triPoD ADAPter bAse Diameter 160 mm, drilled for Baader AHT Hardwood-tripod and 10 Micron 30H100 Italian tripod

• Satellite pointing and precise tracking with „learning function“

• Dual Axis tracking (for simultaneous tracking in both axes compensating refraction, drift and flexions)

• Follow objects routine (for non-stellar object tracking) • Automatic meridian flip / alternative meridian security lock• Electronic Balancing• Up to 25 stars per alignment model – for precise modeling• Up to 10 pointing model database recall • GPS automatic data setting reader• Software assist for precise polar alignment

• Refraction, humidity and air pressure correction• Visible objects filter for Satellites, Comets and Asteroids• Upgradable database for Satellites, Comets and Asteroids• Multi language database• Upgradable mount firmware • ASCoM compatible via LX200 or AP protocols• Baader Domes control implemented• Virtual Keypad by 10 Micron for remote mount control via

customer PC• Remote diagnostics assist option – for remote assistance

and remote readout of all mount parameters

QCi v.2 hPs softWAreadditional features included:

technical datasheetApril 2012

We

rese

rve

the

right

for t

echn

ical

cha

nges

and

impr

ovem

ents

http://www.baader-planetarium.de

Authorised 10Micron Dealer:

True precision – for your asTronomical fuTure

Documents

Transcript of True precision – for your asTronomical fuTure