CORE TECHNOLOGY AName You Know...Filters You Can Trust ™

Max pH Max D.P.1 [psid]Media Temp. [F] Range 80F / 125F / 180F

Microglass 240 3 0 - 9 110/75/50

Tru-Pleat™ GPleated Microglass Elements

Tru-Pleat G elements feature microglass filtrationmedia. Designed specifically for micro-filtration,Tru-Pleat G elements are optimized to providehigh flow rates, and excellent contaminantloading capacity at absolute micron ratings. Endcaps, media, cores and netting are all thermallybonded providing a high degree of compatibilitywith a wide range of process fluids.

Tru-Pleat G elements are available with commonendcap configurations, such as double open end,single open end, 222 o-rings, 226 o-ring withlocking ears, fins, and core extenders. When youneed micro-filtration that performs, ask forTru-Pleat G.

T H E B O T T O M L I N E

• Synthetic HardwareImproved process compatibility over cellulose products.Ensures against failures that lead to untimely process upsets andshut-downs.

• Optimized Surface Area & ConfigurationAllows thorough usage of the filter media, translating intofewer element change-outs and reduced operations andmaintenance costs. Our microglass media offers higher porositythan polymeric medias. With more porosity you can expectlonger service life and lower energy demands.

• Common Sizes and End Cap StylesEasy installation in existing housings without modifications. Savescostly downtime and maintenance expenses associated withhousing modifications.

SPEC IF ICAT IONS

• Recommended change-out D.P. is 20 psid.• Normal flow direction is outside to inside

M A T E R I A L S

O P E R A T I N G D A T A

A P P L I C A T I O N S

• Gas ProcessingAmine and glycol

• Natural Gas Production & GatheringAmine, glycol, produced water, well completion fluids

• General IndustrialPre-R.O., well injection, bottle wash, water, solvents,acids, alkalis, alcohols

• IndustrialWater, solvents, acids, D.I., alcohols

• Food & BeverageWater, flavorings, beer, wine, vinegar

• MEDIA microglass

• CORE2 polyester

• OUTER NETTING polyester

• END CAPS polyester

• SPRINGS polypropylene, steel, stainless steel

• GASKET buna-n

• OPTIONS gasket materials, steel hardware,various support layer materials

Model O.D. I.D. Length Surface Area[in.] [in.] [in.] [ft2]

PS-209 2.5 1.08 9.75 3.7

PS-210 2.5 1.08 10 3.7

PS-219 2.5 1.08 19.5 7.3

PS-220 2.5 1.08 20 7.3

PS-229 2.5 1.08 29.25 11

PS-230 2.5 1.08 30 11

PS-240 2.5 1.08 40 14.5

PS-336 3.0 1.545 36 14.5

N OM I N A L D I M E N S I O N S

© 2009 PECOFacetPECOFacet has a policy of continuousproduct research and developmentand reserves the right to change designand specifications without notice.

Brought to you by PECOFaceta CLARCOR company

EL-TR-TD-02 7/10

Wolters Industrial Park / P.O. Box 640 / Mineral Wells, TX 76068Phone 940.325.2575 / 1.800.877.PECO / Fax 940.325.4622perryequipment.com / Email PECOElements@PECOFacet.com

CORE TECHNOLOGY

Tru-Pleat™ GPleated Microglass Elements

• Efficiency: 99.98% or beta 5000• Grade [µm]: 0.5, 2, 5, 10

P A R T I C L E R E T E N T I O N

O R D E R I N G I N F O R M A T I O N

1. Max. D.P. may be limited by the vessel manufacturer’s design.2. Carbon steel cores are installed in 336 size elements.3. Based on using polyester core and endcaps.

N O T E S

• Filter-Mart

• Fluitek

• FTC

• Gardner & Clark

R E P L A C EM E N T O P T I O N F O R

_ _ _230 10 F

GRADE[µm]

00 = 0.5

02 = 2

05 = 5

10 = 10

SIZE

PS CS1

MEDIA

F = FiberglassMISC.

B

GASKETSB = Buna

E = EPR

P = Polypropylene

S = Silicone

V = Fluorocarbon

A = DOE

C = 226/Finned

F = 222/Finned

J = 226/Closed

O = 222/Closed

E2 = s.s.spr / s.s. extension

E3 = p.p. spr / p.p. extension

E4 = c.s. spr / p.p. extension

E5 = s.s. spr / p.p. extension

E6 = c.s. spr / s.s.

M1 = DOE (steel)

S1 = 2.5" steel spring

S2 = 2.5" s.s. spring

S3 = 2" p.p. spring

X2 = s.s. extension

X2 = p.p. extension

END CAP STYLE

209

210

219

220

229

230

240

336

• Jonell JPMG Series

• Matrix

• Parker

• Royal

Diff

eren

tialP

ress

ure

[psi

d]

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

2.5

2.25

2

1.75

1.5

1.25

1

0.75

0.5

0.25

0

Tru-Pleat G™ Flow Chart at 1 cP

Flow Rate [gpm / 10" length]

0.5 [µm]

2 [µm]

5 [µm]

10 [µm]

• Not all combinationsare available. Consultcustomer service forverification if necessary.

• PECO Series 55, 56, 65, 66, Chemelean, and IndustrialHousing Series

• Other vessels designed for standard 2.5" and 3.0" O.D. elements.

V E S S E L S• Others